diff options
Diffstat (limited to 'sound/soc/codecs/wm_hubs.c')
| -rw-r--r-- | sound/soc/codecs/wm_hubs.c | 220 |
1 files changed, 195 insertions, 25 deletions
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 6c028c470601..dfe957a47f29 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -109,12 +109,103 @@ irqreturn_t wm_hubs_dcs_done(int irq, void *data) } EXPORT_SYMBOL_GPL(wm_hubs_dcs_done); +static bool wm_hubs_dac_hp_direct(struct snd_soc_codec *codec) +{ + int reg; + + /* If we're going via the mixer we'll need to do additional checks */ + reg = snd_soc_read(codec, WM8993_OUTPUT_MIXER1); + if (!(reg & WM8993_DACL_TO_HPOUT1L)) { + if (reg & ~WM8993_DACL_TO_MIXOUTL) { + dev_vdbg(codec->dev, "Analogue paths connected: %x\n", + reg & ~WM8993_DACL_TO_HPOUT1L); + return false; + } else { + dev_vdbg(codec->dev, "HPL connected to mixer\n"); + } + } else { + dev_vdbg(codec->dev, "HPL connected to DAC\n"); + } + + reg = snd_soc_read(codec, WM8993_OUTPUT_MIXER2); + if (!(reg & WM8993_DACR_TO_HPOUT1R)) { + if (reg & ~WM8993_DACR_TO_MIXOUTR) { + dev_vdbg(codec->dev, "Analogue paths connected: %x\n", + reg & ~WM8993_DACR_TO_HPOUT1R); + return false; + } else { + dev_vdbg(codec->dev, "HPR connected to mixer\n"); + } + } else { + dev_vdbg(codec->dev, "HPR connected to DAC\n"); + } + + return true; +} + +struct wm_hubs_dcs_cache { + struct list_head list; + unsigned int left; + unsigned int right; + u16 dcs_cfg; +}; + +static bool wm_hubs_dcs_cache_get(struct snd_soc_codec *codec, + struct wm_hubs_dcs_cache **entry) +{ + struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + struct wm_hubs_dcs_cache *cache; + unsigned int left, right; + + left = snd_soc_read(codec, WM8993_LEFT_OUTPUT_VOLUME); + left &= WM8993_HPOUT1L_VOL_MASK; + + right = snd_soc_read(codec, WM8993_RIGHT_OUTPUT_VOLUME); + right &= WM8993_HPOUT1R_VOL_MASK; + + list_for_each_entry(cache, &hubs->dcs_cache, list) { + if (cache->left != left || cache->right != right) + continue; + + *entry = cache; + return true; + } + + return false; +} + +static void wm_hubs_dcs_cache_set(struct snd_soc_codec *codec, u16 dcs_cfg) +{ + struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + struct wm_hubs_dcs_cache *cache; + + if (hubs->no_cache_dac_hp_direct) + return; + + cache = devm_kzalloc(codec->dev, sizeof(*cache), GFP_KERNEL); + if (!cache) { + dev_err(codec->dev, "Failed to allocate DCS cache entry\n"); + return; + } + + cache->left = snd_soc_read(codec, WM8993_LEFT_OUTPUT_VOLUME); + cache->left &= WM8993_HPOUT1L_VOL_MASK; + + cache->right = snd_soc_read(codec, WM8993_RIGHT_OUTPUT_VOLUME); + cache->right &= WM8993_HPOUT1R_VOL_MASK; + + cache->dcs_cfg = dcs_cfg; + + list_add_tail(&cache->list, &hubs->dcs_cache); +} + /* * Startup calibration of the DC servo */ static void calibrate_dc_servo(struct snd_soc_codec *codec) { struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + struct wm_hubs_dcs_cache *cache; s8 offset; u16 reg, reg_l, reg_r, dcs_cfg, dcs_reg; @@ -129,10 +220,11 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) /* If we're using a digital only path and have a previously * callibrated DC servo offset stored then use that. */ - if (hubs->class_w && hubs->class_w_dcs) { - dev_dbg(codec->dev, "Using cached DC servo offset %x\n", - hubs->class_w_dcs); - snd_soc_write(codec, dcs_reg, hubs->class_w_dcs); + if (wm_hubs_dac_hp_direct(codec) && + wm_hubs_dcs_cache_get(codec, &cache)) { + dev_dbg(codec->dev, "Using cached DCS offset %x for %d,%d\n", + cache->dcs_cfg, cache->left, cache->right); + snd_soc_write(codec, dcs_reg, cache->dcs_cfg); wait_for_dc_servo(codec, WM8993_DCS_TRIG_DAC_WR_0 | WM8993_DCS_TRIG_DAC_WR_1); @@ -207,8 +299,8 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) /* Save the callibrated offset if we're in class W mode and * therefore don't have any analogue signal mixed in. */ - if (hubs->class_w && !hubs->no_cache_class_w) - hubs->class_w_dcs = dcs_cfg; + if (wm_hubs_dac_hp_direct(codec)) + wm_hubs_dcs_cache_set(codec, dcs_cfg); } /* @@ -223,9 +315,6 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol, ret = snd_soc_put_volsw(kcontrol, ucontrol); - /* Updating the analogue gains invalidates the DC servo cache */ - hubs->class_w_dcs = 0; - /* If we're applying an offset correction then updating the * callibration would be likely to introduce further offsets. */ if (hubs->dcs_codes_l || hubs->dcs_codes_r || hubs->no_series_update) @@ -530,6 +619,86 @@ static int lineout_event(struct snd_soc_dapm_widget *w, return 0; } +void wm_hubs_update_class_w(struct snd_soc_codec *codec) +{ + struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); + int enable = WM8993_CP_DYN_V | WM8993_CP_DYN_FREQ; + + if (!wm_hubs_dac_hp_direct(codec)) + enable = false; + + if (hubs->check_class_w_digital && !hubs->check_class_w_digital(codec)) + enable = false; + + dev_vdbg(codec->dev, "Class W %s\n", enable ? "enabled" : "disabled"); + + snd_soc_update_bits(codec, WM8993_CLASS_W_0, + WM8993_CP_DYN_V | WM8993_CP_DYN_FREQ, enable); +} +EXPORT_SYMBOL_GPL(wm_hubs_update_class_w); + +#define WM_HUBS_SINGLE_W(xname, reg, shift, max, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_volsw, \ + .get = snd_soc_dapm_get_volsw, .put = class_w_put_volsw, \ + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) } + +static int class_w_put_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_widget_list *wlist = snd_kcontrol_chip(kcontrol); + struct snd_soc_dapm_widget *widget = wlist->widgets[0]; + struct snd_soc_codec *codec = widget->codec; + int ret; + + ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol); + + wm_hubs_update_class_w(codec); + + return ret; +} + +#define WM_HUBS_ENUM_W(xname, xenum) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_enum_double, \ + .get = snd_soc_dapm_get_enum_double, \ + .put = class_w_put_double, \ + .private_value = (unsigned long)&xenum } + +static int class_w_put_double(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_widget_list *wlist = snd_kcontrol_chip(kcontrol); + struct snd_soc_dapm_widget *widget = wlist->widgets[0]; + struct snd_soc_codec *codec = widget->codec; + int ret; + + ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol); + + wm_hubs_update_class_w(codec); + + return ret; +} + +static const char *hp_mux_text[] = { + "Mixer", + "DAC", +}; + +static const struct soc_enum hpl_enum = + SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER1, 8, 2, hp_mux_text); + +const struct snd_kcontrol_new wm_hubs_hpl_mux = + WM_HUBS_ENUM_W("Left Headphone Mux", hpl_enum); +EXPORT_SYMBOL_GPL(wm_hubs_hpl_mux); + +static const struct soc_enum hpr_enum = + SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER2, 8, 2, hp_mux_text); + +const struct snd_kcontrol_new wm_hubs_hpr_mux = + WM_HUBS_ENUM_W("Right Headphone Mux", hpr_enum); +EXPORT_SYMBOL_GPL(wm_hubs_hpr_mux); + static const struct snd_kcontrol_new in1l_pga[] = { SOC_DAPM_SINGLE("IN1LP Switch", WM8993_INPUT_MIXER2, 5, 1, 0), SOC_DAPM_SINGLE("IN1LN Switch", WM8993_INPUT_MIXER2, 4, 1, 0), @@ -561,25 +730,25 @@ SOC_DAPM_SINGLE("IN1R Switch", WM8993_INPUT_MIXER4, 5, 1, 0), }; static const struct snd_kcontrol_new left_output_mixer[] = { -SOC_DAPM_SINGLE("Right Input Switch", WM8993_OUTPUT_MIXER1, 7, 1, 0), -SOC_DAPM_SINGLE("Left Input Switch", WM8993_OUTPUT_MIXER1, 6, 1, 0), -SOC_DAPM_SINGLE("IN2RN Switch", WM8993_OUTPUT_MIXER1, 5, 1, 0), -SOC_DAPM_SINGLE("IN2LN Switch", WM8993_OUTPUT_MIXER1, 4, 1, 0), -SOC_DAPM_SINGLE("IN2LP Switch", WM8993_OUTPUT_MIXER1, 1, 1, 0), -SOC_DAPM_SINGLE("IN1R Switch", WM8993_OUTPUT_MIXER1, 3, 1, 0), -SOC_DAPM_SINGLE("IN1L Switch", WM8993_OUTPUT_MIXER1, 2, 1, 0), -SOC_DAPM_SINGLE("DAC Switch", WM8993_OUTPUT_MIXER1, 0, 1, 0), +WM_HUBS_SINGLE_W("Right Input Switch", WM8993_OUTPUT_MIXER1, 7, 1, 0), +WM_HUBS_SINGLE_W("Left Input Switch", WM8993_OUTPUT_MIXER1, 6, 1, 0), +WM_HUBS_SINGLE_W("IN2RN Switch", WM8993_OUTPUT_MIXER1, 5, 1, 0), +WM_HUBS_SINGLE_W("IN2LN Switch", WM8993_OUTPUT_MIXER1, 4, 1, 0), +WM_HUBS_SINGLE_W("IN2LP Switch", WM8993_OUTPUT_MIXER1, 1, 1, 0), +WM_HUBS_SINGLE_W("IN1R Switch", WM8993_OUTPUT_MIXER1, 3, 1, 0), +WM_HUBS_SINGLE_W("IN1L Switch", WM8993_OUTPUT_MIXER1, 2, 1, 0), +WM_HUBS_SINGLE_W("DAC Switch", WM8993_OUTPUT_MIXER1, 0, 1, 0), }; static const struct snd_kcontrol_new right_output_mixer[] = { -SOC_DAPM_SINGLE("Left Input Switch", WM8993_OUTPUT_MIXER2, 7, 1, 0), -SOC_DAPM_SINGLE("Right Input Switch", WM8993_OUTPUT_MIXER2, 6, 1, 0), -SOC_DAPM_SINGLE("IN2LN Switch", WM8993_OUTPUT_MIXER2, 5, 1, 0), -SOC_DAPM_SINGLE("IN2RN Switch", WM8993_OUTPUT_MIXER2, 4, 1, 0), -SOC_DAPM_SINGLE("IN1L Switch", WM8993_OUTPUT_MIXER2, 3, 1, 0), -SOC_DAPM_SINGLE("IN1R Switch", WM8993_OUTPUT_MIXER2, 2, 1, 0), -SOC_DAPM_SINGLE("IN2RP Switch", WM8993_OUTPUT_MIXER2, 1, 1, 0), -SOC_DAPM_SINGLE("DAC Switch", WM8993_OUTPUT_MIXER2, 0, 1, 0), +WM_HUBS_SINGLE_W("Left Input Switch", WM8993_OUTPUT_MIXER2, 7, 1, 0), +WM_HUBS_SINGLE_W("Right Input Switch", WM8993_OUTPUT_MIXER2, 6, 1, 0), +WM_HUBS_SINGLE_W("IN2LN Switch", WM8993_OUTPUT_MIXER2, 5, 1, 0), +WM_HUBS_SINGLE_W("IN2RN Switch", WM8993_OUTPUT_MIXER2, 4, 1, 0), +WM_HUBS_SINGLE_W("IN1L Switch", WM8993_OUTPUT_MIXER2, 3, 1, 0), +WM_HUBS_SINGLE_W("IN1R Switch", WM8993_OUTPUT_MIXER2, 2, 1, 0), +WM_HUBS_SINGLE_W("IN2RP Switch", WM8993_OUTPUT_MIXER2, 1, 1, 0), +WM_HUBS_SINGLE_W("DAC Switch", WM8993_OUTPUT_MIXER2, 0, 1, 0), }; static const struct snd_kcontrol_new earpiece_mixer[] = { @@ -943,6 +1112,7 @@ int wm_hubs_add_analogue_routes(struct snd_soc_codec *codec, struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); struct snd_soc_dapm_context *dapm = &codec->dapm; + INIT_LIST_HEAD(&hubs->dcs_cache); init_completion(&hubs->dcs_done); snd_soc_dapm_add_routes(dapm, analogue_routes, |