diff options
Diffstat (limited to 'sound/soc/fsl')
| -rw-r--r-- | sound/soc/fsl/Kconfig | 17 | ||||
| -rw-r--r-- | sound/soc/fsl/Makefile | 7 | ||||
| -rw-r--r-- | sound/soc/fsl/fsl_dma.c | 181 | ||||
| -rw-r--r-- | sound/soc/fsl/fsl_ssi.c | 98 | ||||
| -rw-r--r-- | sound/soc/fsl/fsl_ssi.h | 2 | ||||
| -rw-r--r-- | sound/soc/fsl/mpc5200_psc_i2s.c | 20 | ||||
| -rw-r--r-- | sound/soc/fsl/mpc8610_hpcd.c | 5 |
7 files changed, 182 insertions, 148 deletions
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 95c12b26fe37..9fc908283371 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -1,17 +1,18 @@ config SND_SOC_OF_SIMPLE tristate +# ASoC platform support for the Freescale MPC8610 SOC. This compiles drivers +# for the SSI and the Elo DMA controller. You will still need to select +# a platform driver and a codec driver. config SND_SOC_MPC8610 - bool "ALSA SoC support for the MPC8610 SOC" - depends on MPC8610_HPCD - default y if MPC8610 - help - Say Y if you want to add support for codecs attached to the SSI - device on an MPC8610. + tristate + depends on MPC8610 config SND_SOC_MPC8610_HPCD - bool "ALSA SoC support for the Freescale MPC8610 HPCD board" - depends on SND_SOC_MPC8610 + tristate "ALSA SoC support for the Freescale MPC8610 HPCD board" + # I2C is necessary for the CS4270 driver + depends on MPC8610_HPCD && I2C + select SND_SOC_MPC8610 select SND_SOC_CS4270 select SND_SOC_CS4270_VD33_ERRATA default y if MPC8610_HPCD diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index 035da4afec34..f85134c86387 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -2,10 +2,13 @@ obj-$(CONFIG_SND_SOC_OF_SIMPLE) += soc-of-simple.o # MPC8610 HPCD Machine Support -obj-$(CONFIG_SND_SOC_MPC8610_HPCD) += mpc8610_hpcd.o +snd-soc-mpc8610-hpcd-objs := mpc8610_hpcd.o +obj-$(CONFIG_SND_SOC_MPC8610_HPCD) += snd-soc-mpc8610-hpcd.o # MPC8610 Platform Support -obj-$(CONFIG_SND_SOC_MPC8610) += fsl_ssi.o fsl_dma.o +snd-soc-fsl-ssi-objs := fsl_ssi.o +snd-soc-fsl-dma-objs := fsl_dma.o +obj-$(CONFIG_SND_SOC_MPC8610) += snd-soc-fsl-ssi.o snd-soc-fsl-dma.o obj-$(CONFIG_SND_SOC_MPC5200_I2S) += mpc5200_psc_i2s.o diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 64993eda5679..b3eb8570cd7b 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -142,7 +142,8 @@ static const struct snd_pcm_hardware fsl_dma_hardware = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_JOINT_DUPLEX, + SNDRV_PCM_INFO_JOINT_DUPLEX | + SNDRV_PCM_INFO_PAUSE, .formats = FSLDMA_PCM_FORMATS, .rates = FSLDMA_PCM_RATES, .rate_min = 5512, @@ -464,11 +465,7 @@ static int fsl_dma_open(struct snd_pcm_substream *substream) sizeof(struct fsl_dma_link_descriptor); for (i = 0; i < NUM_DMA_LINKS; i++) { - struct fsl_dma_link_descriptor *link = &dma_private->link[i]; - - link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); - link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); - link->next = cpu_to_be64(temp_link); + dma_private->link[i].next = cpu_to_be64(temp_link); temp_link += sizeof(struct fsl_dma_link_descriptor); } @@ -525,79 +522,9 @@ static int fsl_dma_open(struct snd_pcm_substream *substream) * This function obtains hardware parameters about the opened stream and * programs the DMA controller accordingly. * - * Note that due to a quirk of the SSI's STX register, the target address - * for the DMA operations depends on the sample size. So we don't program - * the dest_addr (for playback -- source_addr for capture) fields in the - * link descriptors here. We do that in fsl_dma_prepare() - */ -static int fsl_dma_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *hw_params) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct fsl_dma_private *dma_private = runtime->private_data; - - dma_addr_t temp_addr; /* Pointer to next period */ - - unsigned int i; - - /* Get all the parameters we need */ - size_t buffer_size = params_buffer_bytes(hw_params); - size_t period_size = params_period_bytes(hw_params); - - /* Initialize our DMA tracking variables */ - dma_private->period_size = period_size; - dma_private->num_periods = params_periods(hw_params); - dma_private->dma_buf_end = dma_private->dma_buf_phys + buffer_size; - dma_private->dma_buf_next = dma_private->dma_buf_phys + - (NUM_DMA_LINKS * period_size); - if (dma_private->dma_buf_next >= dma_private->dma_buf_end) - dma_private->dma_buf_next = dma_private->dma_buf_phys; - - /* - * The actual address in STX0 (destination for playback, source for - * capture) is based on the sample size, but we don't know the sample - * size in this function, so we'll have to adjust that later. See - * comments in fsl_dma_prepare(). - * - * The DMA controller does not have a cache, so the CPU does not - * need to tell it to flush its cache. However, the DMA - * controller does need to tell the CPU to flush its cache. - * That's what the SNOOP bit does. - * - * Also, even though the DMA controller supports 36-bit addressing, for - * simplicity we currently support only 32-bit addresses for the audio - * buffer itself. - */ - temp_addr = substream->dma_buffer.addr; - - for (i = 0; i < NUM_DMA_LINKS; i++) { - struct fsl_dma_link_descriptor *link = &dma_private->link[i]; - - link->count = cpu_to_be32(period_size); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - link->source_addr = cpu_to_be32(temp_addr); - else - link->dest_addr = cpu_to_be32(temp_addr); - - temp_addr += period_size; - } - - return 0; -} - -/** - * fsl_dma_prepare - prepare the DMA registers for playback. - * - * This function is called after the specifics of the audio data are known, - * i.e. snd_pcm_runtime is initialized. - * - * In this function, we finish programming the registers of the DMA - * controller that are dependent on the sample size. - * - * One of the drawbacks with big-endian is that when copying integers of - * different sizes to a fixed-sized register, the address to which the - * integer must be copied is dependent on the size of the integer. + * One drawback of big-endian is that when copying integers of different + * sizes to a fixed-sized register, the address to which the integer must be + * copied is dependent on the size of the integer. * * For example, if P is the address of a 32-bit register, and X is a 32-bit * integer, then X should be copied to address P. However, if X is a 16-bit @@ -613,22 +540,58 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, * and 8 bytes at a time). So we do not support packed 24-bit samples. * 24-bit data must be padded to 32 bits. */ -static int fsl_dma_prepare(struct snd_pcm_substream *substream) +static int fsl_dma_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) { struct snd_pcm_runtime *runtime = substream->runtime; struct fsl_dma_private *dma_private = runtime->private_data; + + /* Number of bits per sample */ + unsigned int sample_size = + snd_pcm_format_physical_width(params_format(hw_params)); + + /* Number of bytes per frame */ + unsigned int frame_size = 2 * (sample_size / 8); + + /* Bus address of SSI STX register */ + dma_addr_t ssi_sxx_phys = dma_private->ssi_sxx_phys; + + /* Size of the DMA buffer, in bytes */ + size_t buffer_size = params_buffer_bytes(hw_params); + + /* Number of bytes per period */ + size_t period_size = params_period_bytes(hw_params); + + /* Pointer to next period */ + dma_addr_t temp_addr = substream->dma_buffer.addr; + + /* Pointer to DMA controller */ struct ccsr_dma_channel __iomem *dma_channel = dma_private->dma_channel; - u32 mr; + + u32 mr; /* DMA Mode Register */ + unsigned int i; - dma_addr_t ssi_sxx_phys; /* Bus address of SSI STX register */ - unsigned int frame_size; /* Number of bytes per frame */ - ssi_sxx_phys = dma_private->ssi_sxx_phys; + /* Initialize our DMA tracking variables */ + dma_private->period_size = period_size; + dma_private->num_periods = params_periods(hw_params); + dma_private->dma_buf_end = dma_private->dma_buf_phys + buffer_size; + dma_private->dma_buf_next = dma_private->dma_buf_phys + + (NUM_DMA_LINKS * period_size); + + if (dma_private->dma_buf_next >= dma_private->dma_buf_end) + /* This happens if the number of periods == NUM_DMA_LINKS */ + dma_private->dma_buf_next = dma_private->dma_buf_phys; mr = in_be32(&dma_channel->mr) & ~(CCSR_DMA_MR_BWC_MASK | CCSR_DMA_MR_SAHTS_MASK | CCSR_DMA_MR_DAHTS_MASK); - switch (runtime->sample_bits) { + /* Due to a quirk of the SSI's STX register, the target address + * for the DMA operations depends on the sample size. So we calculate + * that offset here. While we're at it, also tell the DMA controller + * how much data to transfer per sample. + */ + switch (sample_size) { case 8: mr |= CCSR_DMA_MR_DAHTS_1 | CCSR_DMA_MR_SAHTS_1; ssi_sxx_phys += 3; @@ -641,12 +604,12 @@ static int fsl_dma_prepare(struct snd_pcm_substream *substream) mr |= CCSR_DMA_MR_DAHTS_4 | CCSR_DMA_MR_SAHTS_4; break; default: + /* We should never get here */ dev_err(substream->pcm->card->dev, - "unsupported sample size %u\n", runtime->sample_bits); + "unsupported sample size %u\n", sample_size); return -EINVAL; } - frame_size = runtime->frame_bits / 8; /* * BWC should always be a multiple of the frame size. BWC determines * how many bytes are sent/received before the DMA controller checks the @@ -655,7 +618,6 @@ static int fsl_dma_prepare(struct snd_pcm_substream *substream) * capture, the receive FIFO is triggered when it contains one frame, so * we want to receive one frame at a time. */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) mr |= CCSR_DMA_MR_BWC(2 * frame_size); else @@ -663,16 +625,48 @@ static int fsl_dma_prepare(struct snd_pcm_substream *substream) out_be32(&dma_channel->mr, mr); - /* - * Program the address of the DMA transfer to/from the SSI. - */ for (i = 0; i < NUM_DMA_LINKS; i++) { struct fsl_dma_link_descriptor *link = &dma_private->link[i]; - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + link->count = cpu_to_be32(period_size); + + /* Even though the DMA controller supports 36-bit addressing, + * for simplicity we allow only 32-bit addresses for the audio + * buffer itself. This was enforced in fsl_dma_new() with the + * DMA mask. + * + * The snoop bit tells the DMA controller whether it should tell + * the ECM to snoop during a read or write to an address. For + * audio, we use DMA to transfer data between memory and an I/O + * device (the SSI's STX0 or SRX0 register). Snooping is only + * needed if there is a cache, so we need to snoop memory + * addresses only. For playback, that means we snoop the source + * but not the destination. For capture, we snoop the + * destination but not the source. + * + * Note that failing to snoop properly is unlikely to cause + * cache incoherency if the period size is larger than the + * size of L1 cache. This is because filling in one period will + * flush out the data for the previous period. So if you + * increased period_bytes_min to a large enough size, you might + * get more performance by not snooping, and you'll still be + * okay. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + link->source_addr = cpu_to_be32(temp_addr); + link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + link->dest_addr = cpu_to_be32(ssi_sxx_phys); - else + link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_NOSNOOP); + } else { link->source_addr = cpu_to_be32(ssi_sxx_phys); + link->source_attr = cpu_to_be32(CCSR_DMA_ATR_NOSNOOP); + + link->dest_addr = cpu_to_be32(temp_addr); + link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + } + + temp_addr += period_size; } return 0; @@ -808,7 +802,6 @@ static struct snd_pcm_ops fsl_dma_ops = { .ioctl = snd_pcm_lib_ioctl, .hw_params = fsl_dma_hw_params, .hw_free = fsl_dma_hw_free, - .prepare = fsl_dma_prepare, .pointer = fsl_dma_pointer, }; diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index c6d6eb71dc1d..169bca295b78 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -72,6 +72,7 @@ * @dev: struct device pointer * @playback: the number of playback streams opened * @capture: the number of capture streams opened + * @asynchronous: 0=synchronous mode, 1=asynchronous mode * @cpu_dai: the CPU DAI for this device * @dev_attr: the sysfs device attribute structure * @stats: SSI statistics @@ -86,6 +87,7 @@ struct fsl_ssi_private { struct device *dev; unsigned int playback; unsigned int capture; + int asynchronous; struct snd_soc_dai cpu_dai; struct device_attribute dev_attr; @@ -301,9 +303,10 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, * * FIXME: Little-endian samples require a different shift dir */ - clrsetbits_be32(&ssi->scr, CCSR_SSI_SCR_I2S_MODE_MASK, - CCSR_SSI_SCR_TFR_CLK_DIS | - CCSR_SSI_SCR_I2S_MODE_SLAVE | CCSR_SSI_SCR_SYN); + clrsetbits_be32(&ssi->scr, + CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN, + CCSR_SSI_SCR_TFR_CLK_DIS | CCSR_SSI_SCR_I2S_MODE_SLAVE + | (ssi_private->asynchronous ? 0 : CCSR_SSI_SCR_SYN)); out_be32(&ssi->stcr, CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 | @@ -382,10 +385,15 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, SNDRV_PCM_HW_PARAM_RATE, first_runtime->rate, first_runtime->rate); - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_SAMPLE_BITS, - first_runtime->sample_bits, - first_runtime->sample_bits); + /* If we're in synchronous mode, then we need to constrain + * the sample size as well. We don't support independent sample + * rates in asynchronous mode. + */ + if (!ssi_private->asynchronous) + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS, + first_runtime->sample_bits, + first_runtime->sample_bits); ssi_private->second_stream = substream; } @@ -400,7 +408,7 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, } /** - * fsl_ssi_prepare: prepare the SSI. + * fsl_ssi_hw_params - program the sample size * * Most of the SSI registers have been programmed in the startup function, * but the word length must be programmed here. Unfortunately, programming @@ -412,23 +420,27 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream, * Note: The SxCCR.DC and SxCCR.PM bits are only used if the SSI is the * clock master. */ -static int fsl_ssi_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) +static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params, struct snd_soc_dai *cpu_dai) { - struct snd_pcm_runtime *runtime = substream->runtime; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data; - - struct ccsr_ssi __iomem *ssi = ssi_private->ssi; + struct fsl_ssi_private *ssi_private = cpu_dai->private_data; if (substream == ssi_private->first_stream) { - u32 wl; + struct ccsr_ssi __iomem *ssi = ssi_private->ssi; + unsigned int sample_size = + snd_pcm_format_width(params_format(hw_params)); + u32 wl = CCSR_SSI_SxCCR_WL(sample_size); /* The SSI should always be disabled at this points (SSIEN=0) */ - wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format)); /* In synchronous mode, the SSI uses STCCR for capture */ - clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); + if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) || + !ssi_private->asynchronous) + clrsetbits_be32(&ssi->stccr, + CCSR_SSI_SxCCR_WL_MASK, wl); + else + clrsetbits_be32(&ssi->srccr, + CCSR_SSI_SxCCR_WL_MASK, wl); } return 0; @@ -452,28 +464,33 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd, switch (cmd) { case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: + clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE); } else { - clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + long timeout = jiffies + 10; + setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE); - /* - * I think we need this delay to allow time for the SSI - * to put data into its FIFO. Without it, ALSA starts - * to complain about overruns. + /* Wait until the SSI has filled its FIFO. Without this + * delay, ALSA complains about overruns. When the FIFO + * is full, the DMA controller initiates its first + * transfer. Until then, however, the DMA's DAR + * register is zero, which translates to an + * out-of-bounds pointer. This makes ALSA think an + * overrun has occurred. */ - mdelay(1); + while (!(in_be32(&ssi->sisr) & CCSR_SSI_SISR_RFF0) && + (jiffies < timeout)); + if (!(in_be32(&ssi->sisr) & CCSR_SSI_SISR_RFF0)) + return -EIO; } break; case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) clrbits32(&ssi->scr, CCSR_SSI_SCR_TE); @@ -563,6 +580,15 @@ static int fsl_ssi_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format) /** * fsl_ssi_dai_template: template CPU DAI for the SSI */ +static struct snd_soc_dai_ops fsl_ssi_dai_ops = { + .startup = fsl_ssi_startup, + .hw_params = fsl_ssi_hw_params, + .shutdown = fsl_ssi_shutdown, + .trigger = fsl_ssi_trigger, + .set_sysclk = fsl_ssi_set_sysclk, + .set_fmt = fsl_ssi_set_fmt, +}; + static struct snd_soc_dai fsl_ssi_dai_template = { .playback = { /* The SSI does not support monaural audio. */ @@ -577,14 +603,7 @@ static struct snd_soc_dai fsl_ssi_dai_template = { .rates = FSLSSI_I2S_RATES, .formats = FSLSSI_I2S_FORMATS, }, - .ops = { - .startup = fsl_ssi_startup, - .prepare = fsl_ssi_prepare, - .shutdown = fsl_ssi_shutdown, - .trigger = fsl_ssi_trigger, - .set_sysclk = fsl_ssi_set_sysclk, - .set_fmt = fsl_ssi_set_fmt, - }, + .ops = &fsl_ssi_dai_ops, }; /** @@ -654,6 +673,7 @@ struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info) ssi_private->ssi_phys = ssi_info->ssi_phys; ssi_private->irq = ssi_info->irq; ssi_private->dev = ssi_info->dev; + ssi_private->asynchronous = ssi_info->asynchronous; ssi_private->dev->driver_data = fsl_ssi_dai; @@ -704,6 +724,14 @@ void fsl_ssi_destroy_dai(struct snd_soc_dai *fsl_ssi_dai) } EXPORT_SYMBOL_GPL(fsl_ssi_destroy_dai); +static int __init fsl_ssi_init(void) +{ + printk(KERN_INFO "Freescale Synchronous Serial Interface (SSI) ASoC Driver\n"); + + return 0; +} +module_init(fsl_ssi_init); + MODULE_AUTHOR("Timur Tabi <timur@freescale.com>"); MODULE_DESCRIPTION("Freescale Synchronous Serial Interface (SSI) ASoC Driver"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/fsl/fsl_ssi.h b/sound/soc/fsl/fsl_ssi.h index 83b44d700e33..eade01feaab6 100644 --- a/sound/soc/fsl/fsl_ssi.h +++ b/sound/soc/fsl/fsl_ssi.h @@ -208,6 +208,7 @@ struct ccsr_ssi { * ssi_phys: physical address of the SSI registers * irq: IRQ of this SSI * dev: struct device, used to create the sysfs statistics file + * asynchronous: 0=synchronous mode, 1=asynchronous mode */ struct fsl_ssi_info { unsigned int id; @@ -215,6 +216,7 @@ struct fsl_ssi_info { dma_addr_t ssi_phys; unsigned int irq; struct device *dev; + int asynchronous; }; struct snd_soc_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info); diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c index 9eb1ce185bd0..3aa729df27b5 100644 --- a/sound/soc/fsl/mpc5200_psc_i2s.c +++ b/sound/soc/fsl/mpc5200_psc_i2s.c @@ -468,6 +468,16 @@ static int psc_i2s_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format) /** * psc_i2s_dai_template: template CPU Digital Audio Interface */ +static struct snd_soc_dai_ops psc_i2s_dai_ops = { + .startup = psc_i2s_startup, + .hw_params = psc_i2s_hw_params, + .hw_free = psc_i2s_hw_free, + .shutdown = psc_i2s_shutdown, + .trigger = psc_i2s_trigger, + .set_sysclk = psc_i2s_set_sysclk, + .set_fmt = psc_i2s_set_fmt, +}; + static struct snd_soc_dai psc_i2s_dai_template = { .playback = { .channels_min = 2, @@ -481,15 +491,7 @@ static struct snd_soc_dai psc_i2s_dai_template = { .rates = PSC_I2S_RATES, .formats = PSC_I2S_FORMATS, }, - .ops = { - .startup = psc_i2s_startup, - .hw_params = psc_i2s_hw_params, - .hw_free = psc_i2s_hw_free, - .shutdown = psc_i2s_shutdown, - .trigger = psc_i2s_trigger, - .set_sysclk = psc_i2s_set_sysclk, - .set_fmt = psc_i2s_set_fmt, - }, + .ops = &psc_i2s_dai_ops, }; /* --------------------------------------------------------------------- diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index acf39a646b2f..ef67d1cdffe7 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -353,6 +353,11 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev, } ssi_info.irq = machine_data->ssi_irq; + /* Do we want to use asynchronous mode? */ + ssi_info.asynchronous = + of_find_property(np, "fsl,ssi-asynchronous", NULL) ? 1 : 0; + if (ssi_info.asynchronous) + dev_info(&ofdev->dev, "using asynchronous mode\n"); /* Map the global utilities registers. */ guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts"); |