diff options
Diffstat (limited to 'tools/power/x86/turbostat/turbostat.8')
| -rw-r--r-- | tools/power/x86/turbostat/turbostat.8 | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8 new file mode 100644 index 000000000000..ff75125deed0 --- /dev/null +++ b/tools/power/x86/turbostat/turbostat.8 @@ -0,0 +1,172 @@ +.TH TURBOSTAT 8 +.SH NAME +turbostat \- Report processor frequency and idle statistics +.SH SYNOPSIS +.ft B +.B turbostat +.RB [ "\-v" ] +.RB [ "\-M MSR#" ] +.RB command +.br +.B turbostat +.RB [ "\-v" ] +.RB [ "\-M MSR#" ] +.RB [ "\-i interval_sec" ] +.SH DESCRIPTION +\fBturbostat \fP reports processor topology, frequency +and idle power state statistics on modern X86 processors. +Either \fBcommand\fP is forked and statistics are printed +upon its completion, or statistics are printed periodically. + +\fBturbostat \fP +requires that the processor +supports an "invariant" TSC, plus the APERF and MPERF MSRs. +\fBturbostat \fP will report idle cpu power state residency +on processors that additionally support C-state residency counters. + +.SS Options +The \fB-v\fP option increases verbosity. +.PP +The \fB-M MSR#\fP option dumps the specified MSR, +in addition to the usual frequency and idle statistics. +.PP +The \fB-i interval_sec\fP option prints statistics every \fiinterval_sec\fP seconds. +The default is 5 seconds. +.PP +The \fBcommand\fP parameter forks \fBcommand\fP and upon its exit, +displays the statistics gathered since it was forked. +.PP +.SH FIELD DESCRIPTIONS +.nf +\fBpkg\fP processor package number. +\fBcore\fP processor core number. +\fBCPU\fP Linux CPU (logical processor) number. +\fB%c0\fP percent of the interval that the CPU retired instructions. +\fBGHz\fP average clock rate while the CPU was in c0 state. +\fBTSC\fP average GHz that the TSC ran during the entire interval. +\fB%c1, %c3, %c6\fP show the percentage residency in hardware core idle states. +\fB%pc3, %pc6\fP percentage residency in hardware package idle states. +.fi +.PP +.SH EXAMPLE +Without any parameters, turbostat prints out counters ever 5 seconds. +(override interval with "-i sec" option, or specify a command +for turbostat to fork). + +The first row of statistics reflect the average for the entire system. +Subsequent rows show per-CPU statistics. + +.nf +[root@x980]# ./turbostat +core CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6 + 0.04 1.62 3.38 0.11 0.00 99.85 0.00 95.07 + 0 0 0.04 1.62 3.38 0.06 0.00 99.90 0.00 95.07 + 0 6 0.02 1.62 3.38 0.08 0.00 99.90 0.00 95.07 + 1 2 0.10 1.62 3.38 0.29 0.00 99.61 0.00 95.07 + 1 8 0.11 1.62 3.38 0.28 0.00 99.61 0.00 95.07 + 2 4 0.01 1.62 3.38 0.01 0.00 99.98 0.00 95.07 + 2 10 0.01 1.61 3.38 0.02 0.00 99.98 0.00 95.07 + 8 1 0.07 1.62 3.38 0.15 0.00 99.78 0.00 95.07 + 8 7 0.03 1.62 3.38 0.19 0.00 99.78 0.00 95.07 + 9 3 0.01 1.62 3.38 0.02 0.00 99.98 0.00 95.07 + 9 9 0.01 1.62 3.38 0.02 0.00 99.98 0.00 95.07 + 10 5 0.01 1.62 3.38 0.13 0.00 99.86 0.00 95.07 + 10 11 0.08 1.62 3.38 0.05 0.00 99.86 0.00 95.07 +.fi +.SH VERBOSE EXAMPLE +The "-v" option adds verbosity to the output: + +.nf +GenuineIntel 11 CPUID levels; family:model:stepping 0x6:2c:2 (6:44:2) +12 * 133 = 1600 MHz max efficiency +25 * 133 = 3333 MHz TSC frequency +26 * 133 = 3467 MHz max turbo 4 active cores +26 * 133 = 3467 MHz max turbo 3 active cores +27 * 133 = 3600 MHz max turbo 2 active cores +27 * 133 = 3600 MHz max turbo 1 active cores + +.fi +The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency +available at the minimum package voltage. The \fBTSC frequency\fP is the nominal +maximum frequency of the processor if turbo-mode were not available. This frequency +should be sustainable on all CPUs indefinitely, given nominal power and cooling. +The remaining rows show what maximum turbo frequency is possible +depending on the number of idle cores. Note that this information is +not available on all processors. +.SH FORK EXAMPLE +If turbostat is invoked with a command, it will fork that command +and output the statistics gathered when the command exits. +eg. Here a cycle soaker is run on 1 CPU (see %c0) for a few seconds +until ^C while the other CPUs are mostly idle: + +.nf +[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null + +^Ccore CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6 + 8.49 3.63 3.38 16.23 0.66 74.63 0.00 0.00 + 0 0 1.22 3.62 3.38 32.18 0.00 66.60 0.00 0.00 + 0 6 0.40 3.61 3.38 33.00 0.00 66.60 0.00 0.00 + 1 2 0.11 3.14 3.38 0.19 3.95 95.75 0.00 0.00 + 1 8 0.05 2.88 3.38 0.25 3.95 95.75 0.00 0.00 + 2 4 0.00 3.13 3.38 0.02 0.00 99.98 0.00 0.00 + 2 10 0.00 3.09 3.38 0.02 0.00 99.98 0.00 0.00 + 8 1 0.04 3.50 3.38 14.43 0.00 85.54 0.00 0.00 + 8 7 0.03 2.98 3.38 14.43 0.00 85.54 0.00 0.00 + 9 3 0.00 3.16 3.38 100.00 0.00 0.00 0.00 0.00 + 9 9 99.93 3.63 3.38 0.06 0.00 0.00 0.00 0.00 + 10 5 0.01 2.82 3.38 0.08 0.00 99.91 0.00 0.00 + 10 11 0.02 3.36 3.38 0.06 0.00 99.91 0.00 0.00 +6.950866 sec + +.fi +Above the cycle soaker drives cpu9 up 3.6 Ghz turbo limit +while the other processors are generally in various states of idle. + +Note that cpu3 is an HT sibling sharing core9 +with cpu9, and thus it is unable to get to an idle state +deeper than c1 while cpu9 is busy. + +Note that turbostat reports average GHz of 3.61, while +the arithmetic average of the GHz column above is 3.24. +This is a weighted average, where the weight is %c0. ie. it is the total number of +un-halted cycles elapsed per time divided by the number of CPUs. +.SH NOTES + +.B "turbostat " +must be run as root. + +.B "turbostat " +reads hardware counters, but doesn't write them. +So it will not interfere with the OS or other programs, including +multiple invocations of itself. + +\fBturbostat \fP +may work poorly on Linux-2.6.20 through 2.6.29, +as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF +in those kernels. + +The APERF, MPERF MSRs are defined to count non-halted cycles. +Although it is not guaranteed by the architecture, turbostat assumes +that they count at TSC rate, which is true on all processors tested to date. + +.SH REFERENCES +"Intel® Turbo Boost Technology +in Intel® Core™ Microarchitecture (Nehalem) Based Processors" +http://download.intel.com/design/processor/applnots/320354.pdf + +"Intel® 64 and IA-32 Architectures Software Developer's Manual +Volume 3B: System Programming Guide" +http://www.intel.com/products/processor/manuals/ + +.SH FILES +.ta +.nf +/dev/cpu/*/msr +.fi + +.SH "SEE ALSO" +msr(4), vmstat(8) +.PP +.SH AUTHORS +.nf +Written by Len Brown <len.brown@intel.com> |