diff options
Diffstat (limited to 'tools/power/x86/turbostat/turbostat.8')
| -rw-r--r-- | tools/power/x86/turbostat/turbostat.8 | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8 index 067717bce1d4..a7f7ed01421c 100644 --- a/tools/power/x86/turbostat/turbostat.8 +++ b/tools/power/x86/turbostat/turbostat.8 @@ -33,6 +33,9 @@ name as necessary to disambiguate it from others is necessary. Note that option msr0xXXX is a hex offset, eg. msr0x10 /sys/path... is an absolute path to a sysfs attribute <device> is a perf device from /sys/bus/event_source/devices/<device> eg. cstate_core + On Intel hybrid platforms, instead of one "cpu" perf device there are two, "cpu_core" and "cpu_atom" devices for P and E cores respectively. + Turbostat, in this case, allow user to use "cpu" device and will automatically detect the type of a CPU and translate it to "cpu_core" and "cpu_atom" accordingly. + For a complete example see "ADD PERF COUNTER EXAMPLE #2 (using virtual "cpu" device)". <event> is a perf event for given device from /sys/bus/event_source/devices/<device>/events/<event> eg. c1-residency perf/cstate_core/c1-residency would then use /sys/bus/event_source/devices/cstate_core/events/c1-residency @@ -187,6 +190,8 @@ The system configuration dump (if --quiet is not used) is followed by statistics .PP \fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors. .PP +\fBSysWatt\fP Watts consumed by the whole platform (RAPL PSYS). Disabled by default. Enable with --enable SysWatt. +.PP \fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package. Note that the system summary is the sum of the package throttling time, and thus may be higher than 100% on a multi-package system. Note that the meaning of this field is model specific. For example, some hardware increments this counter when RAPL responds to thermal limits, but does not increment this counter when RAPL responds to power limits. Comparing PkgWatt and PkgTmp to system limits is necessary. .PP \fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM. @@ -387,6 +392,28 @@ CPU pCPU%c1 CPU%c1 .fi +.SH ADD PERF COUNTER EXAMPLE #2 (using virtual cpu device) +Here we run on hybrid, Raptor Lake platform. +We limit turbostat to show output for just cpu0 (pcore) and cpu12 (ecore). +We add a counter showing number of L3 cache misses, using virtual "cpu" device, +labeling it with the column header, "VCMISS". +We add a counter showing number of L3 cache misses, using virtual "cpu_core" device, +labeling it with the column header, "PCMISS". This will fail on ecore cpu12. +We add a counter showing number of L3 cache misses, using virtual "cpu_atom" device, +labeling it with the column header, "ECMISS". This will fail on pcore cpu0. +We display it only once, after the conclusion of 0.1 second sleep. +.nf +sudo ./turbostat --quiet --cpu 0,12 --show CPU --add perf/cpu/cache-misses,cpu,delta,raw,VCMISS --add perf/cpu_core/cache-misses,cpu,delta,raw,PCMISS --add perf/cpu_atom/cache-misses,cpu,delta,raw,ECMISS sleep .1 +turbostat: added_perf_counters_init_: perf/cpu_atom/cache-misses: failed to open counter on cpu0 +turbostat: added_perf_counters_init_: perf/cpu_core/cache-misses: failed to open counter on cpu12 +0.104630 sec +CPU ECMISS PCMISS VCMISS +- 0x0000000000000000 0x0000000000000000 0x0000000000000000 +0 0x0000000000000000 0x0000000000007951 0x0000000000007796 +12 0x000000000001137a 0x0000000000000000 0x0000000000011392 + +.fi + .SH ADD PMT COUNTER EXAMPLE Here we limit turbostat to showing just the CPU number 0. We add two counters, showing crystal clock count and the DC6 residency. |