diff options
Diffstat (limited to 'tools')
88 files changed, 5782 insertions, 271 deletions
diff --git a/tools/iio/Makefile b/tools/iio/Makefile new file mode 100644 index 000000000000..bf7ae6d6612a --- /dev/null +++ b/tools/iio/Makefile @@ -0,0 +1,16 @@ +CC = gcc +CFLAGS = -Wall -g -D_GNU_SOURCE + +all: iio_event_monitor lsiio generic_buffer + +iio_event_monitor: iio_event_monitor.o iio_utils.o + +lsiio: lsiio.o iio_utils.o + +generic_buffer: generic_buffer.o iio_utils.o + +%.o: %.c iio_utils.h + +.PHONY: clean +clean: + rm -f *.o iio_event_monitor lsiio generic_buffer diff --git a/tools/iio/generic_buffer.c b/tools/iio/generic_buffer.c new file mode 100644 index 000000000000..f805493be3eb --- /dev/null +++ b/tools/iio/generic_buffer.c @@ -0,0 +1,359 @@ +/* Industrialio buffer test code. + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is primarily intended as an example application. + * Reads the current buffer setup from sysfs and starts a short capture + * from the specified device, pretty printing the result after appropriate + * conversion. + * + * Command line parameters + * generic_buffer -n <device_name> -t <trigger_name> + * If trigger name is not specified the program assumes you want a dataready + * trigger associated with the device and goes looking for it. + * + */ + +#include <unistd.h> +#include <stdlib.h> +#include <dirent.h> +#include <fcntl.h> +#include <stdio.h> +#include <errno.h> +#include <sys/stat.h> +#include <sys/dir.h> +#include <linux/types.h> +#include <string.h> +#include <poll.h> +#include <endian.h> +#include <getopt.h> +#include <inttypes.h> +#include "iio_utils.h" + +/** + * size_from_channelarray() - calculate the storage size of a scan + * @channels: the channel info array + * @num_channels: number of channels + * + * Has the side effect of filling the channels[i].location values used + * in processing the buffer output. + **/ +int size_from_channelarray(struct iio_channel_info *channels, int num_channels) +{ + int bytes = 0; + int i = 0; + + while (i < num_channels) { + if (bytes % channels[i].bytes == 0) + channels[i].location = bytes; + else + channels[i].location = bytes - bytes%channels[i].bytes + + channels[i].bytes; + bytes = channels[i].location + channels[i].bytes; + i++; + } + return bytes; +} + +void print2byte(int input, struct iio_channel_info *info) +{ + /* First swap if incorrect endian */ + if (info->be) + input = be16toh((uint16_t)input); + else + input = le16toh((uint16_t)input); + + /* + * Shift before conversion to avoid sign extension + * of left aligned data + */ + input >>= info->shift; + if (info->is_signed) { + int16_t val = input; + + val &= (1 << info->bits_used) - 1; + val = (int16_t)(val << (16 - info->bits_used)) >> + (16 - info->bits_used); + printf("%05f ", ((float)val + info->offset)*info->scale); + } else { + uint16_t val = input; + + val &= (1 << info->bits_used) - 1; + printf("%05f ", ((float)val + info->offset)*info->scale); + } +} +/** + * process_scan() - print out the values in SI units + * @data: pointer to the start of the scan + * @channels: information about the channels. Note + * size_from_channelarray must have been called first to fill the + * location offsets. + * @num_channels: number of channels + **/ +void process_scan(char *data, + struct iio_channel_info *channels, + int num_channels) +{ + int k; + + for (k = 0; k < num_channels; k++) + switch (channels[k].bytes) { + /* only a few cases implemented so far */ + case 2: + print2byte(*(uint16_t *)(data + channels[k].location), + &channels[k]); + break; + case 4: + if (!channels[k].is_signed) { + uint32_t val = *(uint32_t *) + (data + channels[k].location); + printf("%05f ", ((float)val + + channels[k].offset)* + channels[k].scale); + + } + break; + case 8: + if (channels[k].is_signed) { + int64_t val = *(int64_t *) + (data + + channels[k].location); + if ((val >> channels[k].bits_used) & 1) + val = (val & channels[k].mask) | + ~channels[k].mask; + /* special case for timestamp */ + if (channels[k].scale == 1.0f && + channels[k].offset == 0.0f) + printf("%" PRId64 " ", val); + else + printf("%05f ", ((float)val + + channels[k].offset)* + channels[k].scale); + } + break; + default: + break; + } + printf("\n"); +} + +int main(int argc, char **argv) +{ + unsigned long num_loops = 2; + unsigned long timedelay = 1000000; + unsigned long buf_len = 128; + + int ret, c, i, j, toread; + int fp; + + int num_channels; + char *trigger_name = NULL, *device_name = NULL; + char *dev_dir_name, *buf_dir_name; + + int datardytrigger = 1; + char *data; + ssize_t read_size; + int dev_num, trig_num; + char *buffer_access; + int scan_size; + int noevents = 0; + int notrigger = 0; + char *dummy; + + struct iio_channel_info *channels; + + while ((c = getopt(argc, argv, "l:w:c:et:n:g")) != -1) { + switch (c) { + case 'n': + device_name = optarg; + break; + case 't': + trigger_name = optarg; + datardytrigger = 0; + break; + case 'e': + noevents = 1; + break; + case 'c': + num_loops = strtoul(optarg, &dummy, 10); + break; + case 'w': + timedelay = strtoul(optarg, &dummy, 10); + break; + case 'l': + buf_len = strtoul(optarg, &dummy, 10); + break; + case 'g': + notrigger = 1; + break; + case '?': + return -1; + } + } + + if (device_name == NULL) + return -1; + + /* Find the device requested */ + dev_num = find_type_by_name(device_name, "iio:device"); + if (dev_num < 0) { + printf("Failed to find the %s\n", device_name); + ret = -ENODEV; + goto error_ret; + } + printf("iio device number being used is %d\n", dev_num); + + asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num); + + if (!notrigger) { + if (trigger_name == NULL) { + /* + * Build the trigger name. If it is device associated + * its name is <device_name>_dev[n] where n matches + * the device number found above. + */ + ret = asprintf(&trigger_name, + "%s-dev%d", device_name, dev_num); + if (ret < 0) { + ret = -ENOMEM; + goto error_ret; + } + } + + /* Verify the trigger exists */ + trig_num = find_type_by_name(trigger_name, "trigger"); + if (trig_num < 0) { + printf("Failed to find the trigger %s\n", trigger_name); + ret = -ENODEV; + goto error_free_triggername; + } + printf("iio trigger number being used is %d\n", trig_num); + } else + printf("trigger-less mode selected\n"); + + /* + * Parse the files in scan_elements to identify what channels are + * present + */ + ret = build_channel_array(dev_dir_name, &channels, &num_channels); + if (ret) { + printf("Problem reading scan element information\n"); + printf("diag %s\n", dev_dir_name); + goto error_free_triggername; + } + + /* + * Construct the directory name for the associated buffer. + * As we know that the lis3l02dq has only one buffer this may + * be built rather than found. + */ + ret = asprintf(&buf_dir_name, + "%siio:device%d/buffer", iio_dir, dev_num); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_triggername; + } + + if (!notrigger) { + printf("%s %s\n", dev_dir_name, trigger_name); + /* Set the device trigger to be the data ready trigger found + * above */ + ret = write_sysfs_string_and_verify("trigger/current_trigger", + dev_dir_name, + trigger_name); + if (ret < 0) { + printf("Failed to write current_trigger file\n"); + goto error_free_buf_dir_name; + } + } + + /* Setup ring buffer parameters */ + ret = write_sysfs_int("length", buf_dir_name, buf_len); + if (ret < 0) + goto error_free_buf_dir_name; + + /* Enable the buffer */ + ret = write_sysfs_int("enable", buf_dir_name, 1); + if (ret < 0) + goto error_free_buf_dir_name; + scan_size = size_from_channelarray(channels, num_channels); + data = malloc(scan_size*buf_len); + if (!data) { + ret = -ENOMEM; + goto error_free_buf_dir_name; + } + + ret = asprintf(&buffer_access, "/dev/iio:device%d", dev_num); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_data; + } + + /* Attempt to open non blocking the access dev */ + fp = open(buffer_access, O_RDONLY | O_NONBLOCK); + if (fp == -1) { /* If it isn't there make the node */ + printf("Failed to open %s\n", buffer_access); + ret = -errno; + goto error_free_buffer_access; + } + + /* Wait for events 10 times */ + for (j = 0; j < num_loops; j++) { + if (!noevents) { + struct pollfd pfd = { + .fd = fp, + .events = POLLIN, + }; + + poll(&pfd, 1, -1); + toread = buf_len; + + } else { + usleep(timedelay); + toread = 64; + } + + read_size = read(fp, + data, + toread*scan_size); + if (read_size < 0) { + if (errno == -EAGAIN) { + printf("nothing available\n"); + continue; + } else + break; + } + for (i = 0; i < read_size/scan_size; i++) + process_scan(data + scan_size*i, + channels, + num_channels); + } + + /* Stop the buffer */ + ret = write_sysfs_int("enable", buf_dir_name, 0); + if (ret < 0) + goto error_close_buffer_access; + + if (!notrigger) + /* Disconnect the trigger - just write a dummy name. */ + write_sysfs_string("trigger/current_trigger", + dev_dir_name, "NULL"); + +error_close_buffer_access: + close(fp); +error_free_data: + free(data); +error_free_buffer_access: + free(buffer_access); +error_free_buf_dir_name: + free(buf_dir_name); +error_free_triggername: + if (datardytrigger) + free(trigger_name); +error_ret: + return ret; +} diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c new file mode 100644 index 000000000000..427c271ac0d6 --- /dev/null +++ b/tools/iio/iio_event_monitor.c @@ -0,0 +1,308 @@ +/* Industrialio event test code. + * + * Copyright (c) 2011-2012 Lars-Peter Clausen <lars@metafoo.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is primarily intended as an example application. + * Reads the current buffer setup from sysfs and starts a short capture + * from the specified device, pretty printing the result after appropriate + * conversion. + * + * Usage: + * iio_event_monitor <device_name> + * + */ + +#include <unistd.h> +#include <stdlib.h> +#include <stdbool.h> +#include <stdio.h> +#include <errno.h> +#include <string.h> +#include <poll.h> +#include <fcntl.h> +#include <sys/ioctl.h> +#include "iio_utils.h" +#include <linux/iio/events.h> +#include <linux/iio/types.h> + +static const char * const iio_chan_type_name_spec[] = { + [IIO_VOLTAGE] = "voltage", + [IIO_CURRENT] = "current", + [IIO_POWER] = "power", + [IIO_ACCEL] = "accel", + [IIO_ANGL_VEL] = "anglvel", + [IIO_MAGN] = "magn", + [IIO_LIGHT] = "illuminance", + [IIO_INTENSITY] = "intensity", + [IIO_PROXIMITY] = "proximity", + [IIO_TEMP] = "temp", + [IIO_INCLI] = "incli", + [IIO_ROT] = "rot", + [IIO_ANGL] = "angl", + [IIO_TIMESTAMP] = "timestamp", + [IIO_CAPACITANCE] = "capacitance", + [IIO_ALTVOLTAGE] = "altvoltage", + [IIO_CCT] = "cct", + [IIO_PRESSURE] = "pressure", + [IIO_HUMIDITYRELATIVE] = "humidityrelative", + [IIO_ACTIVITY] = "activity", + [IIO_STEPS] = "steps", +}; + +static const char * const iio_ev_type_text[] = { + [IIO_EV_TYPE_THRESH] = "thresh", + [IIO_EV_TYPE_MAG] = "mag", + [IIO_EV_TYPE_ROC] = "roc", + [IIO_EV_TYPE_THRESH_ADAPTIVE] = "thresh_adaptive", + [IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive", + [IIO_EV_TYPE_CHANGE] = "change", +}; + +static const char * const iio_ev_dir_text[] = { + [IIO_EV_DIR_EITHER] = "either", + [IIO_EV_DIR_RISING] = "rising", + [IIO_EV_DIR_FALLING] = "falling" +}; + +static const char * const iio_modifier_names[] = { + [IIO_MOD_X] = "x", + [IIO_MOD_Y] = "y", + [IIO_MOD_Z] = "z", + [IIO_MOD_X_AND_Y] = "x&y", + [IIO_MOD_X_AND_Z] = "x&z", + [IIO_MOD_Y_AND_Z] = "y&z", + [IIO_MOD_X_AND_Y_AND_Z] = "x&y&z", + [IIO_MOD_X_OR_Y] = "x|y", + [IIO_MOD_X_OR_Z] = "x|z", + [IIO_MOD_Y_OR_Z] = "y|z", + [IIO_MOD_X_OR_Y_OR_Z] = "x|y|z", + [IIO_MOD_LIGHT_BOTH] = "both", + [IIO_MOD_LIGHT_IR] = "ir", + [IIO_MOD_ROOT_SUM_SQUARED_X_Y] = "sqrt(x^2+y^2)", + [IIO_MOD_SUM_SQUARED_X_Y_Z] = "x^2+y^2+z^2", + [IIO_MOD_LIGHT_CLEAR] = "clear", + [IIO_MOD_LIGHT_RED] = "red", + [IIO_MOD_LIGHT_GREEN] = "green", + [IIO_MOD_LIGHT_BLUE] = "blue", + [IIO_MOD_QUATERNION] = "quaternion", + [IIO_MOD_TEMP_AMBIENT] = "ambient", + [IIO_MOD_TEMP_OBJECT] = "object", + [IIO_MOD_NORTH_MAGN] = "from_north_magnetic", + [IIO_MOD_NORTH_TRUE] = "from_north_true", + [IIO_MOD_NORTH_MAGN_TILT_COMP] = "from_north_magnetic_tilt_comp", + [IIO_MOD_NORTH_TRUE_TILT_COMP] = "from_north_true_tilt_comp", + [IIO_MOD_RUNNING] = "running", + [IIO_MOD_JOGGING] = "jogging", + [IIO_MOD_WALKING] = "walking", + [IIO_MOD_STILL] = "still", +}; + +static bool event_is_known(struct iio_event_data *event) +{ + enum iio_chan_type type = IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event->id); + enum iio_modifier mod = IIO_EVENT_CODE_EXTRACT_MODIFIER(event->id); + enum iio_event_type ev_type = IIO_EVENT_CODE_EXTRACT_TYPE(event->id); + enum iio_event_direction dir = IIO_EVENT_CODE_EXTRACT_DIR(event->id); + + switch (type) { + case IIO_VOLTAGE: + case IIO_CURRENT: + case IIO_POWER: + case IIO_ACCEL: + case IIO_ANGL_VEL: + case IIO_MAGN: + case IIO_LIGHT: + case IIO_INTENSITY: + case IIO_PROXIMITY: + case IIO_TEMP: + case IIO_INCLI: + case IIO_ROT: + case IIO_ANGL: + case IIO_TIMESTAMP: + case IIO_CAPACITANCE: + case IIO_ALTVOLTAGE: + case IIO_CCT: + case IIO_PRESSURE: + case IIO_HUMIDITYRELATIVE: + case IIO_ACTIVITY: + case IIO_STEPS: + break; + default: + return false; + } + + switch (mod) { + case IIO_NO_MOD: + case IIO_MOD_X: + case IIO_MOD_Y: + case IIO_MOD_Z: + case IIO_MOD_X_AND_Y: + case IIO_MOD_X_AND_Z: + case IIO_MOD_Y_AND_Z: + case IIO_MOD_X_AND_Y_AND_Z: + case IIO_MOD_X_OR_Y: + case IIO_MOD_X_OR_Z: + case IIO_MOD_Y_OR_Z: + case IIO_MOD_X_OR_Y_OR_Z: + case IIO_MOD_LIGHT_BOTH: + case IIO_MOD_LIGHT_IR: + case IIO_MOD_ROOT_SUM_SQUARED_X_Y: + case IIO_MOD_SUM_SQUARED_X_Y_Z: + case IIO_MOD_LIGHT_CLEAR: + case IIO_MOD_LIGHT_RED: + case IIO_MOD_LIGHT_GREEN: + case IIO_MOD_LIGHT_BLUE: + case IIO_MOD_QUATERNION: + case IIO_MOD_TEMP_AMBIENT: + case IIO_MOD_TEMP_OBJECT: + case IIO_MOD_NORTH_MAGN: + case IIO_MOD_NORTH_TRUE: + case IIO_MOD_NORTH_MAGN_TILT_COMP: + case IIO_MOD_NORTH_TRUE_TILT_COMP: + case IIO_MOD_RUNNING: + case IIO_MOD_JOGGING: + case IIO_MOD_WALKING: + case IIO_MOD_STILL: + break; + default: + return false; + } + + switch (ev_type) { + case IIO_EV_TYPE_THRESH: + case IIO_EV_TYPE_MAG: + case IIO_EV_TYPE_ROC: + case IIO_EV_TYPE_THRESH_ADAPTIVE: + case IIO_EV_TYPE_MAG_ADAPTIVE: + case IIO_EV_TYPE_CHANGE: + break; + default: + return false; + } + + switch (dir) { + case IIO_EV_DIR_EITHER: + case IIO_EV_DIR_RISING: + case IIO_EV_DIR_FALLING: + case IIO_EV_DIR_NONE: + break; + default: + return false; + } + + return true; +} + +static void print_event(struct iio_event_data *event) +{ + enum iio_chan_type type = IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event->id); + enum iio_modifier mod = IIO_EVENT_CODE_EXTRACT_MODIFIER(event->id); + enum iio_event_type ev_type = IIO_EVENT_CODE_EXTRACT_TYPE(event->id); + enum iio_event_direction dir = IIO_EVENT_CODE_EXTRACT_DIR(event->id); + int chan = IIO_EVENT_CODE_EXTRACT_CHAN(event->id); + int chan2 = IIO_EVENT_CODE_EXTRACT_CHAN2(event->id); + bool diff = IIO_EVENT_CODE_EXTRACT_DIFF(event->id); + + if (!event_is_known(event)) { + printf("Unknown event: time: %lld, id: %llx\n", + event->timestamp, event->id); + return; + } + + printf("Event: time: %lld, ", event->timestamp); + + if (mod != IIO_NO_MOD) { + printf("type: %s(%s), ", + iio_chan_type_name_spec[type], + iio_modifier_names[mod]); + } else { + printf("type: %s, ", + iio_chan_type_name_spec[type]); + } + + if (diff && chan >= 0 && chan2 >= 0) + printf("channel: %d-%d, ", chan, chan2); + else if (chan >= 0) + printf("channel: %d, ", chan); + + printf("evtype: %s", iio_ev_type_text[ev_type]); + + if (dir != IIO_EV_DIR_NONE) + printf(", direction: %s", iio_ev_dir_text[dir]); + printf("\n"); +} + +int main(int argc, char **argv) +{ + struct iio_event_data event; + const char *device_name; + char *chrdev_name; + int ret; + int dev_num; + int fd, event_fd; + + if (argc <= 1) { + printf("Usage: %s <device_name>\n", argv[0]); + return -1; + } + + device_name = argv[1]; + + dev_num = find_type_by_name(device_name, "iio:device"); + if (dev_num >= 0) { + printf("Found IIO device with name %s with device number %d\n", + device_name, dev_num); + ret = asprintf(&chrdev_name, "/dev/iio:device%d", dev_num); + if (ret < 0) { + ret = -ENOMEM; + goto error_ret; + } + } else { + /* If we can't find a IIO device by name assume device_name is a + IIO chrdev */ + chrdev_name = strdup(device_name); + } + + fd = open(chrdev_name, 0); + if (fd == -1) { + fprintf(stdout, "Failed to open %s\n", chrdev_name); + ret = -errno; + goto error_free_chrdev_name; + } + + ret = ioctl(fd, IIO_GET_EVENT_FD_IOCTL, &event_fd); + + close(fd); + + if (ret == -1 || event_fd == -1) { + fprintf(stdout, "Failed to retrieve event fd\n"); + ret = -errno; + goto error_free_chrdev_name; + } + + while (true) { + ret = read(event_fd, &event, sizeof(event)); + if (ret == -1) { + if (errno == EAGAIN) { + printf("nothing available\n"); + continue; + } else { + perror("Failed to read event from device"); + ret = -errno; + break; + } + } + + print_event(&event); + } + + close(event_fd); +error_free_chrdev_name: + free(chrdev_name); +error_ret: + return ret; +} diff --git a/tools/iio/iio_utils.c b/tools/iio/iio_utils.c new file mode 100644 index 000000000000..6f6452167b67 --- /dev/null +++ b/tools/iio/iio_utils.c @@ -0,0 +1,669 @@ +/* IIO - useful set of util functionality + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _IIO_UTILS_H +#define _IIO_UTILS_H + +#include <string.h> +#include <stdlib.h> +#include <stdio.h> +#include <stdint.h> +#include <dirent.h> +#include <errno.h> +#include <ctype.h> +#include "iio_utils.h" + +const char *iio_dir = "/sys/bus/iio/devices/"; + +static char * const iio_direction[] = { + "in", + "out", +}; + +/** + * iioutils_break_up_name() - extract generic name from full channel name + * @full_name: the full channel name + * @generic_name: the output generic channel name + **/ +int iioutils_break_up_name(const char *full_name, + char **generic_name) +{ + char *current; + char *w, *r; + char *working, *prefix = ""; + int i; + + for (i = 0; i < sizeof(iio_direction) / sizeof(iio_direction[0]); i++) + if (!strncmp(full_name, iio_direction[i], + strlen(iio_direction[i]))) { + prefix = iio_direction[i]; + break; + } + + current = strdup(full_name + strlen(prefix) + 1); + working = strtok(current, "_\0"); + + w = working; + r = working; + + while (*r != '\0') { + if (!isdigit(*r)) { + *w = *r; + w++; + } + r++; + } + *w = '\0'; + asprintf(generic_name, "%s_%s", prefix, working); + free(current); + + return 0; +} + +/** + * iioutils_get_type() - find and process _type attribute data + * @is_signed: output whether channel is signed + * @bytes: output how many bytes the channel storage occupies + * @mask: output a bit mask for the raw data + * @be: big endian + * @device_dir: the iio device directory + * @name: the channel name + * @generic_name: the channel type name + **/ +int iioutils_get_type(unsigned *is_signed, + unsigned *bytes, + unsigned *bits_used, + unsigned *shift, + uint64_t *mask, + unsigned *be, + const char *device_dir, + const char *name, + const char *generic_name) +{ + FILE *sysfsfp; + int ret; + DIR *dp; + char *scan_el_dir, *builtname, *builtname_generic, *filename = 0; + char signchar, endianchar; + unsigned padint; + const struct dirent *ent; + + ret = asprintf(&scan_el_dir, FORMAT_SCAN_ELEMENTS_DIR, device_dir); + if (ret < 0) { + ret = -ENOMEM; + goto error_ret; + } + ret = asprintf(&builtname, FORMAT_TYPE_FILE, name); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_scan_el_dir; + } + ret = asprintf(&builtname_generic, FORMAT_TYPE_FILE, generic_name); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_builtname; + } + + dp = opendir(scan_el_dir); + if (dp == NULL) { + ret = -errno; + goto error_free_builtname_generic; + } + while (ent = readdir(dp), ent != NULL) + /* + * Do we allow devices to override a generic name with + * a specific one? + */ + if ((strcmp(builtname, ent->d_name) == 0) || + (strcmp(builtname_generic, ent->d_name) == 0)) { + ret = asprintf(&filename, + "%s/%s", scan_el_dir, ent->d_name); + if (ret < 0) { + ret = -ENOMEM; + goto error_closedir; + } + sysfsfp = fopen(filename, "r"); + if (sysfsfp == NULL) { + printf("failed to open %s\n", filename); + ret = -errno; + goto error_free_filename; + } + + ret = fscanf(sysfsfp, + "%ce:%c%u/%u>>%u", + &endianchar, + &signchar, + bits_used, + &padint, shift); + if (ret < 0) { + printf("failed to pass scan type description\n"); + ret = -errno; + goto error_close_sysfsfp; + } + *be = (endianchar == 'b'); + *bytes = padint / 8; + if (*bits_used == 64) + *mask = ~0; + else + *mask = (1 << *bits_used) - 1; + if (signchar == 's') + *is_signed = 1; + else + *is_signed = 0; + fclose(sysfsfp); + free(filename); + + filename = 0; + sysfsfp = 0; + } +error_close_sysfsfp: + if (sysfsfp) + fclose(sysfsfp); +error_free_filename: + if (filename) + free(filename); +error_closedir: + closedir(dp); +error_free_builtname_generic: + free(builtname_generic); +error_free_builtname: + free(builtname); +error_free_scan_el_dir: + free(scan_el_dir); +error_ret: + return ret; +} + +int iioutils_get_param_float(float *output, + const char *param_name, + const char *device_dir, + const char *name, + const char *generic_name) +{ + FILE *sysfsfp; + int ret; + DIR *dp; + char *builtname, *builtname_generic; + char *filename = NULL; + const struct dirent *ent; + + ret = asprintf(&builtname, "%s_%s", name, param_name); + if (ret < 0) { + ret = -ENOMEM; + goto error_ret; + } + ret = asprintf(&builtname_generic, + "%s_%s", generic_name, param_name); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_builtname; + } + dp = opendir(device_dir); + if (dp == NULL) { + ret = -errno; + goto error_free_builtname_generic; + } + while (ent = readdir(dp), ent != NULL) + if ((strcmp(builtname, ent->d_name) == 0) || + (strcmp(builtname_generic, ent->d_name) == 0)) { + ret = asprintf(&filename, + "%s/%s", device_dir, ent->d_name); + if (ret < 0) { + ret = -ENOMEM; + goto error_closedir; + } + sysfsfp = fopen(filename, "r"); + if (!sysfsfp) { + ret = -errno; + goto error_free_filename; + } + fscanf(sysfsfp, "%f", output); + break; + } +error_free_filename: + if (filename) + free(filename); +error_closedir: + closedir(dp); +error_free_builtname_generic: + free(builtname_generic); +error_free_builtname: + free(builtname); +error_ret: + return ret; +} + +/** + * bsort_channel_array_by_index() - reorder so that the array is in index order + * + **/ + +void bsort_channel_array_by_index(struct iio_channel_info **ci_array, + int cnt) +{ + + struct iio_channel_info temp; + int x, y; + + for (x = 0; x < cnt; x++) + for (y = 0; y < (cnt - 1); y++) + if ((*ci_array)[y].index > (*ci_array)[y+1].index) { + temp = (*ci_array)[y + 1]; + (*ci_array)[y + 1] = (*ci_array)[y]; + (*ci_array)[y] = temp; + } +} + +/** + * build_channel_array() - function to figure out what channels are present + * @device_dir: the IIO device directory in sysfs + * @ + **/ +int build_channel_array(const char *device_dir, + struct iio_channel_info **ci_array, + int *counter) +{ + DIR *dp; + FILE *sysfsfp; + int count, i; + struct iio_channel_info *current; + int ret; + const struct dirent *ent; + char *scan_el_dir; + char *filename; + + *counter = 0; + ret = asprintf(&scan_el_dir, FORMAT_SCAN_ELEMENTS_DIR, device_dir); + if (ret < 0) { + ret = -ENOMEM; + goto error_ret; + } + dp = opendir(scan_el_dir); + if (dp == NULL) { + ret = -errno; + goto error_free_name; + } + while (ent = readdir(dp), ent != NULL) + if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"), + "_en") == 0) { + ret = asprintf(&filename, + "%s/%s", scan_el_dir, ent->d_name); + if (ret < 0) { + ret = -ENOMEM; + goto error_close_dir; + } + sysfsfp = fopen(filename, "r"); + if (sysfsfp == NULL) { + ret = -errno; + free(filename); + goto error_close_dir; + } + fscanf(sysfsfp, "%i", &ret); + if (ret == 1) + (*counter)++; + fclose(sysfsfp); + free(filename); + } + *ci_array = malloc(sizeof(**ci_array) * (*counter)); + if (*ci_array == NULL) { + ret = -ENOMEM; + goto error_close_dir; + } + seekdir(dp, 0); + count = 0; + while (ent = readdir(dp), ent != NULL) { + if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"), + "_en") == 0) { + int current_enabled = 0; + + current = &(*ci_array)[count++]; + ret = asprintf(&filename, + "%s/%s", scan_el_dir, ent->d_name); + if (ret < 0) { + ret = -ENOMEM; + /* decrement count to avoid freeing name */ + count--; + goto error_cleanup_array; + } + sysfsfp = fopen(filename, "r"); + if (sysfsfp == NULL) { + free(filename); + ret = -errno; + goto error_cleanup_array; + } + fscanf(sysfsfp, "%i", ¤t_enabled); + fclose(sysfsfp); + + if (!current_enabled) { + free(filename); + count--; + continue; + } + + current->scale = 1.0; + current->offset = 0; + current->name = strndup(ent->d_name, + strlen(ent->d_name) - + strlen("_en")); + if (current->name == NULL) { + free(filename); + ret = -ENOMEM; + goto error_cleanup_array; + } + /* Get the generic and specific name elements */ + ret = iioutils_break_up_name(current->name, + ¤t->generic_name); + if (ret) { + free(filename); + goto error_cleanup_array; + } + ret = asprintf(&filename, + "%s/%s_index", + scan_el_dir, + current->name); + if (ret < 0) { + free(filename); + ret = -ENOMEM; + goto error_cleanup_array; + } + sysfsfp = fopen(filename, "r"); + fscanf(sysfsfp, "%u", ¤t->index); + fclose(sysfsfp); + free(filename); + /* Find the scale */ + ret = iioutils_get_param_float(¤t->scale, + "scale", + device_dir, + current->name, + current->generic_name); + if (ret < 0) + goto error_cleanup_array; + ret = iioutils_get_param_float(¤t->offset, + "offset", + device_dir, + current->name, + current->generic_name); + if (ret < 0) + goto error_cleanup_array; + ret = iioutils_get_type(¤t->is_signed, + ¤t->bytes, + ¤t->bits_used, + ¤t->shift, + ¤t->mask, + ¤t->be, + device_dir, + current->name, + current->generic_name); + } + } + + closedir(dp); + /* reorder so that the array is in index order */ + bsort_channel_array_by_index(ci_array, *counter); + + return 0; + +error_cleanup_array: + for (i = count - 1; i >= 0; i--) + free((*ci_array)[i].name); + free(*ci_array); +error_close_dir: + closedir(dp); +error_free_name: + free(scan_el_dir); +error_ret: + return ret; +} + +/** + * find_type_by_name() - function to match top level types by name + * @name: top level type instance name + * @type: the type of top level instance being sort + * + * Typical types this is used for are device and trigger. + **/ +int find_type_by_name(const char *name, const char *type) +{ + const struct dirent *ent; + int number, numstrlen; + + FILE *nameFile; + DIR *dp; + char thisname[IIO_MAX_NAME_LENGTH]; + char *filename; + + dp = opendir(iio_dir); + if (dp == NULL) { + printf("No industrialio devices available\n"); + return -ENODEV; + } + + while (ent = readdir(dp), ent != NULL) { + if (strcmp(ent->d_name, ".") != 0 && + strcmp(ent->d_name, "..") != 0 && + strlen(ent->d_name) > strlen(type) && + strncmp(ent->d_name, type, strlen(type)) == 0) { + numstrlen = sscanf(ent->d_name + strlen(type), + "%d", + &number); + /* verify the next character is not a colon */ + if (strncmp(ent->d_name + strlen(type) + numstrlen, + ":", + 1) != 0) { + filename = malloc(strlen(iio_dir) + + strlen(type) + + numstrlen + + 6); + if (filename == NULL) { + closedir(dp); + return -ENOMEM; + } + sprintf(filename, "%s%s%d/name", + iio_dir, + type, + number); + nameFile = fopen(filename, "r"); + if (!nameFile) { + free(filename); + continue; + } + free(filename); + fscanf(nameFile, "%s", thisname); + fclose(nameFile); + if (strcmp(name, thisname) == 0) { + closedir(dp); + return number; + } + } + } + } + closedir(dp); + return -ENODEV; +} + +int _write_sysfs_int(char *filename, char *basedir, int val, int verify) +{ + int ret = 0; + FILE *sysfsfp; + int test; + char *temp = malloc(strlen(basedir) + strlen(filename) + 2); + + if (temp == NULL) + return -ENOMEM; + sprintf(temp, "%s/%s", basedir, filename); + sysfsfp = fopen(temp, "w"); + if (sysfsfp == NULL) { + printf("failed to open %s\n", temp); + ret = -errno; + goto error_free; + } + fprintf(sysfsfp, "%d", val); + fclose(sysfsfp); + if (verify) { + sysfsfp = fopen(temp, "r"); + if (sysfsfp == NULL) { + printf("failed to open %s\n", temp); + ret = -errno; + goto error_free; + } + fscanf(sysfsfp, "%d", &test); + fclose(sysfsfp); + if (test != val) { + printf("Possible failure in int write %d to %s%s\n", + val, + basedir, + filename); + ret = -1; + } + } +error_free: + free(temp); + return ret; +} + +int write_sysfs_int(char *filename, char *basedir, int val) +{ + return _write_sysfs_int(filename, basedir, val, 0); +} + +int write_sysfs_int_and_verify(char *filename, char *basedir, int val) +{ + return _write_sysfs_int(filename, basedir, val, 1); +} + +int _write_sysfs_string(char *filename, char *basedir, char *val, int verify) +{ + int ret = 0; + FILE *sysfsfp; + char *temp = malloc(strlen(basedir) + strlen(filename) + 2); + + if (temp == NULL) { + printf("Memory allocation failed\n"); + return -ENOMEM; + } + sprintf(temp, "%s/%s", basedir, filename); + sysfsfp = fopen(temp, "w"); + if (sysfsfp == NULL) { + printf("Could not open %s\n", temp); + ret = -errno; + goto error_free; + } + fprintf(sysfsfp, "%s", val); + fclose(sysfsfp); + if (verify) { + sysfsfp = fopen(temp, "r"); + if (sysfsfp == NULL) { + printf("could not open file to verify\n"); + ret = -errno; + goto error_free; + } + fscanf(sysfsfp, "%s", temp); + fclose(sysfsfp); + if (strcmp(temp, val) != 0) { + printf("Possible failure in string write of %s " + "Should be %s " + "written to %s\%s\n", + temp, + val, + basedir, + filename); + ret = -1; + } + } +error_free: + free(temp); + + return ret; +} + +/** + * write_sysfs_string_and_verify() - string write, readback and verify + * @filename: name of file to write to + * @basedir: the sysfs directory in which the file is to be found + * @val: the string to write + **/ +int write_sysfs_string_and_verify(char *filename, char *basedir, char *val) +{ + return _write_sysfs_string(filename, basedir, val, 1); +} + +int write_sysfs_string(char *filename, char *basedir, char *val) +{ + return _write_sysfs_string(filename, basedir, val, 0); +} + +int read_sysfs_posint(char *filename, char *basedir) +{ + int ret; + FILE *sysfsfp; + char *temp = malloc(strlen(basedir) + strlen(filename) + 2); + + if (temp == NULL) { + printf("Memory allocation failed"); + return -ENOMEM; + } + sprintf(temp, "%s/%s", basedir, filename); + sysfsfp = fopen(temp, "r"); + if (sysfsfp == NULL) { + ret = -errno; + goto error_free; + } + fscanf(sysfsfp, "%d\n", &ret); + fclose(sysfsfp); +error_free: + free(temp); + return ret; +} + +int read_sysfs_float(char *filename, char *basedir, float *val) +{ + int ret = 0; + FILE *sysfsfp; + char *temp = malloc(strlen(basedir) + strlen(filename) + 2); + + if (temp == NULL) { + printf("Memory allocation failed"); + return -ENOMEM; + } + sprintf(temp, "%s/%s", basedir, filename); + sysfsfp = fopen(temp, "r"); + if (sysfsfp == NULL) { + ret = -errno; + goto error_free; + } + fscanf(sysfsfp, "%f\n", val); + fclose(sysfsfp); +error_free: + free(temp); + return ret; +} + +int read_sysfs_string(const char *filename, const char *basedir, char *str) +{ + int ret = 0; + FILE *sysfsfp; + char *temp = malloc(strlen(basedir) + strlen(filename) + 2); + + if (temp == NULL) { + printf("Memory allocation failed"); + return -ENOMEM; + } + sprintf(temp, "%s/%s", basedir, filename); + sysfsfp = fopen(temp, "r"); + if (sysfsfp == NULL) { + ret = -errno; + goto error_free; + } + fscanf(sysfsfp, "%s\n", str); + fclose(sysfsfp); +error_free: + free(temp); + return ret; +} + +#endif /* _IIO_UTILS_H */ diff --git a/tools/iio/iio_utils.h b/tools/iio/iio_utils.h new file mode 100644 index 000000000000..1bc837b2d769 --- /dev/null +++ b/tools/iio/iio_utils.h @@ -0,0 +1,71 @@ +#ifndef _IIO_UTILS_H_ +#define _IIO_UTILS_H_ + +/* IIO - useful set of util functionality + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <stdint.h> + +/* Made up value to limit allocation sizes */ +#define IIO_MAX_NAME_LENGTH 30 + +#define FORMAT_SCAN_ELEMENTS_DIR "%s/scan_elements" +#define FORMAT_TYPE_FILE "%s_type" + +extern const char *iio_dir; + +/** + * struct iio_channel_info - information about a given channel + * @name: channel name + * @generic_name: general name for channel type + * @scale: scale factor to be applied for conversion to si units + * @offset: offset to be applied for conversion to si units + * @index: the channel index in the buffer output + * @bytes: number of bytes occupied in buffer output + * @mask: a bit mask for the raw output + * @is_signed: is the raw value stored signed + * @enabled: is this channel enabled + **/ +struct iio_channel_info { + char *name; + char *generic_name; + float scale; + float offset; + unsigned index; + unsigned bytes; + unsigned bits_used; + unsigned shift; + uint64_t mask; + unsigned be; + unsigned is_signed; + unsigned location; +}; + +int iioutils_break_up_name(const char *full_name, char **generic_name); +int iioutils_get_type(unsigned *is_signed, unsigned *bytes, + unsigned *bits_used, unsigned *shift, + uint64_t *mask, unsigned *be, + const char *device_dir, const char *name, + const char *generic_name); +int iioutils_get_param_float(float *output, const char *param_name, + const char *device_dir, const char *name, + const char *generic_name); +void bsort_channel_array_by_index(struct iio_channel_info **ci_array, int cnt); +int build_channel_array(const char *device_dir, + struct iio_channel_info **ci_array, int *counter); +int find_type_by_name(const char *name, const char *type); +int write_sysfs_int(char *filename, char *basedir, int val); +int write_sysfs_int_and_verify(char *filename, char *basedir, int val); +int write_sysfs_string_and_verify(char *filename, char *basedir, char *val); +int write_sysfs_string(char *filename, char *basedir, char *val); +int read_sysfs_posint(char *filename, char *basedir); +int read_sysfs_float(char *filename, char *basedir, float *val); +int read_sysfs_string(const char *filename, const char *basedir, char *str); + +#endif /* _IIO_UTILS_H_ */ diff --git a/tools/iio/lsiio.c b/tools/iio/lsiio.c new file mode 100644 index 000000000000..c585440f864e --- /dev/null +++ b/tools/iio/lsiio.c @@ -0,0 +1,158 @@ +/* + * Industrial I/O utilities - lsiio.c + * + * Copyright (c) 2010 Manuel Stahl <manuel.stahl@iis.fraunhofer.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <string.h> +#include <dirent.h> +#include <stdio.h> +#include <errno.h> +#include <stdint.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/dir.h> +#include "iio_utils.h" + + +static enum verbosity { + VERBLEVEL_DEFAULT, /* 0 gives lspci behaviour */ + VERBLEVEL_SENSORS, /* 1 lists sensors */ +} verblevel = VERBLEVEL_DEFAULT; + +const char *type_device = "iio:device"; +const char *type_trigger = "trigger"; + + +static inline int check_prefix(const char *str, const char *prefix) +{ + return strlen(str) > strlen(prefix) && + strncmp(str, prefix, strlen(prefix)) == 0; +} + +static inline int check_postfix(const char *str, const char *postfix) +{ + return strlen(str) > strlen(postfix) && + strcmp(str + strlen(str) - strlen(postfix), postfix) == 0; +} + +static int dump_channels(const char *dev_dir_name) +{ + DIR *dp; + const struct dirent *ent; + + dp = opendir(dev_dir_name); + if (dp == NULL) + return -errno; + while (ent = readdir(dp), ent != NULL) + if (check_prefix(ent->d_name, "in_") && + check_postfix(ent->d_name, "_raw")) { + printf(" %-10s\n", ent->d_name); + } + + return 0; +} + +static int dump_one_device(const char *dev_dir_name) +{ + char name[IIO_MAX_NAME_LENGTH]; + int dev_idx; + int retval; + + retval = sscanf(dev_dir_name + strlen(iio_dir) + strlen(type_device), + "%i", &dev_idx); + if (retval != 1) + return -EINVAL; + read_sysfs_string("name", dev_dir_name, name); + printf("Device %03d: %s\n", dev_idx, name); + + if (verblevel >= VERBLEVEL_SENSORS) + return dump_channels(dev_dir_name); + return 0; +} + +static int dump_one_trigger(const char *dev_dir_name) +{ + char name[IIO_MAX_NAME_LENGTH]; + int dev_idx; + int retval; + + retval = sscanf(dev_dir_name + strlen(iio_dir) + strlen(type_trigger), + "%i", &dev_idx); + if (retval != 1) + return -EINVAL; + read_sysfs_string("name", dev_dir_name, name); + printf("Trigger %03d: %s\n", dev_idx, name); + return 0; +} + +static void dump_devices(void) +{ + const struct dirent *ent; + DIR *dp; + + dp = opendir(iio_dir); + if (dp == NULL) { + printf("No industrial I/O devices available\n"); + return; + } + + while (ent = readdir(dp), ent != NULL) { + if (check_prefix(ent->d_name, type_device)) { + char *dev_dir_name; + + asprintf(&dev_dir_name, "%s%s", iio_dir, ent->d_name); + dump_one_device(dev_dir_name); + free(dev_dir_name); + if (verblevel >= VERBLEVEL_SENSORS) + printf("\n"); + } + } + rewinddir(dp); + while (ent = readdir(dp), ent != NULL) { + if (check_prefix(ent->d_name, type_trigger)) { + char *dev_dir_name; + + asprintf(&dev_dir_name, "%s%s", iio_dir, ent->d_name); + dump_one_trigger(dev_dir_name); + free(dev_dir_name); + } + } + closedir(dp); +} + +int main(int argc, char **argv) +{ + int c, err = 0; + + while ((c = getopt(argc, argv, "d:D:v")) != EOF) { + switch (c) { + case 'v': + verblevel++; + break; + + case '?': + default: + err++; + break; + } + } + if (err || argc > optind) { + fprintf(stderr, "Usage: lsiio [options]...\n" + "List industrial I/O devices\n" + " -v, --verbose\n" + " Increase verbosity (may be given multiple times)\n" + ); + exit(1); + } + + dump_devices(); + + return 0; +} diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 12a7e2a40c89..e0917c0f5d9f 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -4086,7 +4086,7 @@ static struct print_arg *make_bprint_args(char *fmt, void *data, int size, struc if (asprintf(&arg->atom.atom, "%lld", ip) < 0) goto out_free; - /* skip the first "%pf: " */ + /* skip the first "%ps: " */ for (ptr = fmt + 5, bptr = data + field->offset; bptr < data + size && *ptr; ptr++) { int ls = 0; diff --git a/tools/perf/bench/mem-memcpy-x86-64-asm-def.h b/tools/perf/bench/mem-memcpy-x86-64-asm-def.h index d66ab799b35f..8c0c1a2770c8 100644 --- a/tools/perf/bench/mem-memcpy-x86-64-asm-def.h +++ b/tools/perf/bench/mem-memcpy-x86-64-asm-def.h @@ -1,12 +1,12 @@ -MEMCPY_FN(__memcpy, +MEMCPY_FN(memcpy_orig, "x86-64-unrolled", "unrolled memcpy() in arch/x86/lib/memcpy_64.S") -MEMCPY_FN(memcpy_c, +MEMCPY_FN(__memcpy, "x86-64-movsq", "movsq-based memcpy() in arch/x86/lib/memcpy_64.S") -MEMCPY_FN(memcpy_c_e, +MEMCPY_FN(memcpy_erms, "x86-64-movsb", "movsb-based memcpy() in arch/x86/lib/memcpy_64.S") diff --git a/tools/perf/bench/mem-memcpy-x86-64-asm.S b/tools/perf/bench/mem-memcpy-x86-64-asm.S index fcd9cf00600a..e4c2c30143b9 100644 --- a/tools/perf/bench/mem-memcpy-x86-64-asm.S +++ b/tools/perf/bench/mem-memcpy-x86-64-asm.S @@ -1,8 +1,6 @@ #define memcpy MEMCPY /* don't hide glibc's memcpy() */ #define altinstr_replacement text #define globl p2align 4; .globl -#define Lmemcpy_c globl memcpy_c; memcpy_c -#define Lmemcpy_c_e globl memcpy_c_e; memcpy_c_e #include "../../../arch/x86/lib/memcpy_64.S" /* * We need to provide note.GNU-stack section, saying that we want diff --git a/tools/perf/bench/mem-memcpy.c b/tools/perf/bench/mem-memcpy.c index db1d3a29d97f..d3dfb7936dcd 100644 --- a/tools/perf/bench/mem-memcpy.c +++ b/tools/perf/bench/mem-memcpy.c @@ -36,7 +36,7 @@ static const struct option options[] = { "Specify length of memory to copy. " "Available units: B, KB, MB, GB and TB (upper and lower)"), OPT_STRING('r', "routine", &routine, "default", - "Specify routine to copy"), + "Specify routine to copy, \"all\" runs all available routines"), OPT_INTEGER('i', "iterations", &iterations, "repeat memcpy() invocation this number of times"), OPT_BOOLEAN('c', "cycle", &use_cycle, @@ -135,55 +135,16 @@ struct bench_mem_info { const char *const *usage; }; -static int bench_mem_common(int argc, const char **argv, - const char *prefix __maybe_unused, - struct bench_mem_info *info) +static void __bench_mem_routine(struct bench_mem_info *info, int r_idx, size_t len, double totallen) { - int i; - size_t len; - double totallen; + const struct routine *r = &info->routines[r_idx]; double result_bps[2]; u64 result_cycle[2]; - argc = parse_options(argc, argv, options, - info->usage, 0); - - if (no_prefault && only_prefault) { - fprintf(stderr, "Invalid options: -o and -n are mutually exclusive\n"); - return 1; - } - - if (use_cycle) - init_cycle(); - - len = (size_t)perf_atoll((char *)length_str); - totallen = (double)len * iterations; - result_cycle[0] = result_cycle[1] = 0ULL; result_bps[0] = result_bps[1] = 0.0; - if ((s64)len <= 0) { - fprintf(stderr, "Invalid length:%s\n", length_str); - return 1; - } - - /* same to without specifying either of prefault and no-prefault */ - if (only_prefault && no_prefault) - only_prefault = no_prefault = false; - - for (i = 0; info->routines[i].name; i++) { - if (!strcmp(info->routines[i].name, routine)) - break; - } - if (!info->routines[i].name) { - printf("Unknown routine:%s\n", routine); - printf("Available routines...\n"); - for (i = 0; info->routines[i].name; i++) { - printf("\t%s ... %s\n", - info->routines[i].name, info->routines[i].desc); - } - return 1; - } + printf("Routine %s (%s)\n", r->name, r->desc); if (bench_format == BENCH_FORMAT_DEFAULT) printf("# Copying %s Bytes ...\n\n", length_str); @@ -191,28 +152,17 @@ static int bench_mem_common(int argc, const char **argv, if (!only_prefault && !no_prefault) { /* show both of results */ if (use_cycle) { - result_cycle[0] = - info->do_cycle(&info->routines[i], len, false); - result_cycle[1] = - info->do_cycle(&info->routines[i], len, true); + result_cycle[0] = info->do_cycle(r, len, false); + result_cycle[1] = info->do_cycle(r, len, true); } else { - result_bps[0] = - info->do_gettimeofday(&info->routines[i], - len, false); - result_bps[1] = - info->do_gettimeofday(&info->routines[i], - len, true); + result_bps[0] = info->do_gettimeofday(r, len, false); + result_bps[1] = info->do_gettimeofday(r, len, true); } } else { - if (use_cycle) { - result_cycle[pf] = - info->do_cycle(&info->routines[i], - len, only_prefault); - } else { - result_bps[pf] = - info->do_gettimeofday(&info->routines[i], - len, only_prefault); - } + if (use_cycle) + result_cycle[pf] = info->do_cycle(r, len, only_prefault); + else + result_bps[pf] = info->do_gettimeofday(r, len, only_prefault); } switch (bench_format) { @@ -265,6 +215,60 @@ static int bench_mem_common(int argc, const char **argv, die("unknown format: %d\n", bench_format); break; } +} + +static int bench_mem_common(int argc, const char **argv, + const char *prefix __maybe_unused, + struct bench_mem_info *info) +{ + int i; + size_t len; + double totallen; + + argc = parse_options(argc, argv, options, + info->usage, 0); + + if (no_prefault && only_prefault) { + fprintf(stderr, "Invalid options: -o and -n are mutually exclusive\n"); + return 1; + } + + if (use_cycle) + init_cycle(); + + len = (size_t)perf_atoll((char *)length_str); + totallen = (double)len * iterations; + + if ((s64)len <= 0) { + fprintf(stderr, "Invalid length:%s\n", length_str); + return 1; + } + + /* same to without specifying either of prefault and no-prefault */ + if (only_prefault && no_prefault) + only_prefault = no_prefault = false; + + if (!strncmp(routine, "all", 3)) { + for (i = 0; info->routines[i].name; i++) + __bench_mem_routine(info, i, len, totallen); + return 0; + } + + for (i = 0; info->routines[i].name; i++) { + if (!strcmp(info->routines[i].name, routine)) + break; + } + if (!info->routines[i].name) { + printf("Unknown routine:%s\n", routine); + printf("Available routines...\n"); + for (i = 0; info->routines[i].name; i++) { + printf("\t%s ... %s\n", + info->routines[i].name, info->routines[i].desc); + } + return 1; + } + + __bench_mem_routine(info, i, len, totallen); return 0; } diff --git a/tools/perf/bench/mem-memset-x86-64-asm-def.h b/tools/perf/bench/mem-memset-x86-64-asm-def.h index a71dff97c1f5..f02d028771d9 100644 --- a/tools/perf/bench/mem-memset-x86-64-asm-def.h +++ b/tools/perf/bench/mem-memset-x86-64-asm-def.h @@ -1,12 +1,12 @@ -MEMSET_FN(__memset, +MEMSET_FN(memset_orig, "x86-64-unrolled", "unrolled memset() in arch/x86/lib/memset_64.S") -MEMSET_FN(memset_c, +MEMSET_FN(__memset, "x86-64-stosq", "movsq-based memset() in arch/x86/lib/memset_64.S") -MEMSET_FN(memset_c_e, +MEMSET_FN(memset_erms, "x86-64-stosb", "movsb-based memset() in arch/x86/lib/memset_64.S") diff --git a/tools/perf/bench/mem-memset-x86-64-asm.S b/tools/perf/bench/mem-memset-x86-64-asm.S index 9e5af89ed13a..de278784c866 100644 --- a/tools/perf/bench/mem-memset-x86-64-asm.S +++ b/tools/perf/bench/mem-memset-x86-64-asm.S @@ -1,8 +1,6 @@ #define memset MEMSET /* don't hide glibc's memset() */ #define altinstr_replacement text #define globl p2align 4; .globl -#define Lmemset_c globl memset_c; memset_c -#define Lmemset_c_e globl memset_c_e; memset_c_e #include "../../../arch/x86/lib/memset_64.S" /* diff --git a/tools/perf/util/include/asm/alternative-asm.h b/tools/perf/util/include/asm/alternative-asm.h index 6789d788d494..3a3a0f16456a 100644 --- a/tools/perf/util/include/asm/alternative-asm.h +++ b/tools/perf/util/include/asm/alternative-asm.h @@ -4,5 +4,6 @@ /* Just disable it so we can build arch/x86/lib/memcpy_64.S for perf bench: */ #define altinstruction_entry # +#define ALTERNATIVE_2 # #endif diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 7831e2d93949..e3074230f236 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -456,7 +456,7 @@ static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname, return -EINVAL; } if (field->name[0] == '[') { - pr_err("Semantic error: %s is not a pointor" + pr_err("Semantic error: %s is not a pointer" " nor array.\n", varname); return -EINVAL; } diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 0db571340edb..95abddcd7839 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -17,6 +17,7 @@ TARGETS += sysctl TARGETS += timers TARGETS += user TARGETS += vm +TARGETS += x86 #Please keep the TARGETS list alphabetically sorted TARGETS_HOTPLUG = cpu-hotplug @@ -55,7 +56,40 @@ clean_hotplug: make -C $$TARGET clean; \ done; +INSTALL_PATH ?= install +INSTALL_PATH := $(abspath $(INSTALL_PATH)) +ALL_SCRIPT := $(INSTALL_PATH)/run_kselftest.sh + +install: +ifdef INSTALL_PATH + @# Ask all targets to install their files + mkdir -p $(INSTALL_PATH) + for TARGET in $(TARGETS); do \ + mkdir -p $(INSTALL_PATH)/$$TARGET ; \ + make -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \ + done; + + @# Ask all targets to emit their test scripts + echo "#!/bin/bash" > $(ALL_SCRIPT) + echo "cd \$$(dirname \$$0)" >> $(ALL_SCRIPT) + echo "ROOT=\$$PWD" >> $(ALL_SCRIPT) + + for TARGET in $(TARGETS); do \ + echo "echo ; echo Running tests in $$TARGET" >> $(ALL_SCRIPT); \ + echo "echo ========================================" >> $(ALL_SCRIPT); \ + echo "cd $$TARGET" >> $(ALL_SCRIPT); \ + make -s --no-print-directory -C $$TARGET emit_tests >> $(ALL_SCRIPT); \ + echo "cd \$$ROOT" >> $(ALL_SCRIPT); \ + done; + + chmod u+x $(ALL_SCRIPT) +else + $(error Error: set INSTALL_PATH to use install) +endif + clean: for TARGET in $(TARGETS); do \ make -C $$TARGET clean; \ done; + +.PHONY: install diff --git a/tools/testing/selftests/breakpoints/Makefile b/tools/testing/selftests/breakpoints/Makefile index e18b42b254af..182235640209 100644 --- a/tools/testing/selftests/breakpoints/Makefile +++ b/tools/testing/selftests/breakpoints/Makefile @@ -16,8 +16,9 @@ else echo "Not an x86 target, can't build breakpoints selftests" endif -run_tests: - @./breakpoint_test || echo "breakpoints selftests: [FAIL]" +TEST_PROGS := breakpoint_test + +include ../lib.mk clean: rm -fr breakpoint_test diff --git a/tools/testing/selftests/cpu-hotplug/Makefile b/tools/testing/selftests/cpu-hotplug/Makefile index e9c28d8dc84b..fe1f99101c5d 100644 --- a/tools/testing/selftests/cpu-hotplug/Makefile +++ b/tools/testing/selftests/cpu-hotplug/Makefile @@ -1,9 +1,10 @@ all: -run_tests: - @/bin/bash ./on-off-test.sh || echo "cpu-hotplug selftests: [FAIL]" +TEST_PROGS := cpu-on-off-test.sh + +include ../lib.mk run_full_test: - @/bin/bash ./on-off-test.sh -a || echo "cpu-hotplug selftests: [FAIL]" + @/bin/bash ./cpu-on-off-test.sh -a || echo "cpu-hotplug selftests: [FAIL]" clean: diff --git a/tools/testing/selftests/cpu-hotplug/on-off-test.sh b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh index 98b1d6565f2c..98b1d6565f2c 100644..100755 --- a/tools/testing/selftests/cpu-hotplug/on-off-test.sh +++ b/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh diff --git a/tools/testing/selftests/efivarfs/Makefile b/tools/testing/selftests/efivarfs/Makefile index 29e8c6bc81b0..736c3ddfc787 100644 --- a/tools/testing/selftests/efivarfs/Makefile +++ b/tools/testing/selftests/efivarfs/Makefile @@ -1,12 +1,13 @@ -CC = $(CROSS_COMPILE)gcc CFLAGS = -Wall test_objs = open-unlink create-read all: $(test_objs) -run_tests: all - @/bin/bash ./efivarfs.sh || echo "efivarfs selftests: [FAIL]" +TEST_PROGS := efivarfs.sh +TEST_FILES := $(test_objs) + +include ../lib.mk clean: rm -f $(test_objs) diff --git a/tools/testing/selftests/efivarfs/efivarfs.sh b/tools/testing/selftests/efivarfs/efivarfs.sh index 77edcdcc016b..77edcdcc016b 100644..100755 --- a/tools/testing/selftests/efivarfs/efivarfs.sh +++ b/tools/testing/selftests/efivarfs/efivarfs.sh diff --git a/tools/testing/selftests/exec/Makefile b/tools/testing/selftests/exec/Makefile index 66dfc2ce1788..4edb7d0da29b 100644 --- a/tools/testing/selftests/exec/Makefile +++ b/tools/testing/selftests/exec/Makefile @@ -1,4 +1,3 @@ -CC = $(CROSS_COMPILE)gcc CFLAGS = -Wall BINARIES = execveat DEPS = execveat.symlink execveat.denatured script subdir @@ -18,8 +17,12 @@ execveat.denatured: execveat %: %.c $(CC) $(CFLAGS) -o $@ $^ -run_tests: all - ./execveat +TEST_PROGS := execveat +TEST_FILES := $(DEPS) + +include ../lib.mk + +override EMIT_TESTS := echo "mkdir -p subdir; (./execveat && echo \"selftests: execveat [PASS]\") || echo \"selftests: execveat [FAIL]\"" clean: rm -rf $(BINARIES) $(DEPS) subdir.moved execveat.moved xxxxx* diff --git a/tools/testing/selftests/firmware/Makefile b/tools/testing/selftests/firmware/Makefile index e23cce0bbc3a..9bf82234855b 100644 --- a/tools/testing/selftests/firmware/Makefile +++ b/tools/testing/selftests/firmware/Makefile @@ -3,25 +3,9 @@ # No binaries, but make sure arg-less "make" doesn't trigger "run_tests" all: -fw_filesystem: - @if /bin/sh ./fw_filesystem.sh ; then \ - echo "fw_filesystem: ok"; \ - else \ - echo "fw_filesystem: [FAIL]"; \ - exit 1; \ - fi +TEST_PROGS := fw_filesystem.sh fw_userhelper.sh -fw_userhelper: - @if /bin/sh ./fw_userhelper.sh ; then \ - echo "fw_userhelper: ok"; \ - else \ - echo "fw_userhelper: [FAIL]"; \ - exit 1; \ - fi - -run_tests: all fw_filesystem fw_userhelper +include ../lib.mk # Nothing to clean up. clean: - -.PHONY: all clean run_tests fw_filesystem fw_userhelper diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh index 3fc6c10c2479..3fc6c10c2479 100644..100755 --- a/tools/testing/selftests/firmware/fw_filesystem.sh +++ b/tools/testing/selftests/firmware/fw_filesystem.sh diff --git a/tools/testing/selftests/firmware/fw_userhelper.sh b/tools/testing/selftests/firmware/fw_userhelper.sh index 6efbade12139..6efbade12139 100644..100755 --- a/tools/testing/selftests/firmware/fw_userhelper.sh +++ b/tools/testing/selftests/firmware/fw_userhelper.sh diff --git a/tools/testing/selftests/ftrace/Makefile b/tools/testing/selftests/ftrace/Makefile index 76cc9f156267..346720639d1d 100644 --- a/tools/testing/selftests/ftrace/Makefile +++ b/tools/testing/selftests/ftrace/Makefile @@ -1,7 +1,8 @@ all: -run_tests: - @/bin/sh ./ftracetest || echo "ftrace selftests: [FAIL]" +TEST_PROGS := ftracetest + +include ../lib.mk clean: rm -rf logs/* diff --git a/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc b/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc index fd9c49a13612..aa51f6c17359 100644 --- a/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc +++ b/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc @@ -2,4 +2,4 @@ # description: Basic event tracing check test -f available_events -a -f set_event -a -d events # check scheduler events are available -grep -q sched available_events && exit 0 || exit -1
\ No newline at end of file +grep -q sched available_events && exit 0 || exit $FAIL diff --git a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc index 668616d9bb03..87eb9d6dd4ca 100644 --- a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc +++ b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc @@ -9,7 +9,11 @@ do_reset() { fail() { #msg do_reset echo $1 - exit -1 + exit $FAIL +} + +yield() { + ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1 } if [ ! -f set_event -o ! -d events/sched ]; then @@ -21,7 +25,8 @@ reset_tracer do_reset echo 'sched:sched_switch' > set_event -usleep 1 + +yield count=`cat trace | grep sched_switch | wc -l` if [ $count -eq 0 ]; then @@ -31,7 +36,8 @@ fi do_reset echo 1 > events/sched/sched_switch/enable -usleep 1 + +yield count=`cat trace | grep sched_switch | wc -l` if [ $count -eq 0 ]; then @@ -41,7 +47,8 @@ fi do_reset echo 0 > events/sched/sched_switch/enable -usleep 1 + +yield count=`cat trace | grep sched_switch | wc -l` if [ $count -ne 0 ]; then diff --git a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc index 655c415b6e7f..ced27ef0638f 100644 --- a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc +++ b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc @@ -9,7 +9,11 @@ do_reset() { fail() { #msg do_reset echo $1 - exit -1 + exit $FAIL +} + +yield() { + ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1 } if [ ! -f set_event -o ! -d events/sched ]; then @@ -21,7 +25,8 @@ reset_tracer do_reset echo 'sched:*' > set_event -usleep 1 + +yield count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` if [ $count -lt 3 ]; then @@ -31,7 +36,8 @@ fi do_reset echo 1 > events/sched/enable -usleep 1 + +yield count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` if [ $count -lt 3 ]; then @@ -41,7 +47,8 @@ fi do_reset echo 0 > events/sched/enable -usleep 1 + +yield count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l` if [ $count -ne 0 ]; then diff --git a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc index 480845774007..0bb5df3c00d4 100644 --- a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc +++ b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc @@ -9,7 +9,11 @@ do_reset() { fail() { #msg do_reset echo $1 - exit -1 + exit $FAIL +} + +yield() { + ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1 } if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then @@ -21,6 +25,9 @@ reset_tracer do_reset echo '*:*' > set_event + +yield + count=`cat trace | grep -v ^# | wc -l` if [ $count -eq 0 ]; then fail "none of events are recorded" @@ -29,6 +36,9 @@ fi do_reset echo 1 > events/enable + +yield + count=`cat trace | grep -v ^# | wc -l` if [ $count -eq 0 ]; then fail "none of events are recorded" @@ -37,6 +47,9 @@ fi do_reset echo 0 > events/enable + +yield + count=`cat trace | grep -v ^# | wc -l` if [ $count -ne 0 ]; then fail "any of events should not be recorded" diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc index c15e018e0220..15c2dba06ea2 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc @@ -16,7 +16,9 @@ fi do_reset() { reset_tracer - echo 0 > /proc/sys/kernel/stack_tracer_enabled + if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then + echo 0 > /proc/sys/kernel/stack_tracer_enabled + fi enable_tracing clear_trace echo > set_ftrace_filter @@ -25,7 +27,7 @@ do_reset() { fail() { # msg do_reset echo $1 - exit -1 + exit $FAIL } disable_tracing diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc index 6af5f6360b18..0ab2189613ef 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc @@ -17,7 +17,7 @@ do_reset() { fail() { # msg do_reset echo $1 - exit -1 + exit $FAIL } disable_tracing diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc index 2e719cb1fc4d..7808336d6f50 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc @@ -31,7 +31,7 @@ fail() { # mesg reset_tracer echo > set_ftrace_filter echo $1 - exit -1 + exit $FAIL } echo "Testing function tracer with profiler:" diff --git a/tools/testing/selftests/gen_kselftest_tar.sh b/tools/testing/selftests/gen_kselftest_tar.sh new file mode 100755 index 000000000000..17d5bd0c0936 --- /dev/null +++ b/tools/testing/selftests/gen_kselftest_tar.sh @@ -0,0 +1,55 @@ +#!/bin/bash +# +# gen_kselftest_tar +# Generate kselftest tarball +# Author: Shuah Khan <shuahkh@osg.samsung.com> +# Copyright (C) 2015 Samsung Electronics Co., Ltd. + +# This software may be freely redistributed under the terms of the GNU +# General Public License (GPLv2). + +# main +main() +{ + if [ "$#" -eq 0 ]; then + echo "$0: Generating default compression gzip" + copts="cvzf" + ext=".tar.gz" + else + case "$1" in + tar) + copts="cvf" + ext=".tar" + ;; + targz) + copts="cvzf" + ext=".tar.gz" + ;; + tarbz2) + copts="cvjf" + ext=".tar.bz2" + ;; + tarxz) + copts="cvJf" + ext=".tar.xz" + ;; + *) + echo "Unknown tarball format $1" + exit 1 + ;; + esac + fi + + install_dir=./kselftest + +# Run install using INSTALL_KSFT_PATH override to generate install +# directory +./kselftest_install.sh +tar $copts kselftest${ext} $install_dir +echo "Kselftest archive kselftest${ext} created!" + +# clean up install directory +rm -rf kselftest +} + +main "$@" diff --git a/tools/testing/selftests/ipc/Makefile b/tools/testing/selftests/ipc/Makefile index 74bbefdeaf4c..25d2e702c68a 100644 --- a/tools/testing/selftests/ipc/Makefile +++ b/tools/testing/selftests/ipc/Makefile @@ -12,14 +12,11 @@ endif CFLAGS += -I../../../../usr/include/ all: -ifeq ($(ARCH),x86) - gcc $(CFLAGS) msgque.c -o msgque_test -else - echo "Not an x86 target, can't build msgque selftest" -endif + $(CC) $(CFLAGS) msgque.c -o msgque_test + +TEST_PROGS := msgque_test -run_tests: all - ./msgque_test +include ../lib.mk clean: rm -fr ./msgque_test diff --git a/tools/testing/selftests/kcmp/Makefile b/tools/testing/selftests/kcmp/Makefile index ff0eefdc6ceb..2ae7450a9a89 100644 --- a/tools/testing/selftests/kcmp/Makefile +++ b/tools/testing/selftests/kcmp/Makefile @@ -1,10 +1,10 @@ -CC := $(CROSS_COMPILE)$(CC) CFLAGS += -I../../../../usr/include/ all: kcmp_test -run_tests: all - @./kcmp_test || echo "kcmp_test: [FAIL]" +TEST_PROGS := kcmp_test + +include ../lib.mk clean: $(RM) kcmp_test kcmp-test-file diff --git a/tools/testing/selftests/kselftest_install.sh b/tools/testing/selftests/kselftest_install.sh new file mode 100755 index 000000000000..1555fbdb08da --- /dev/null +++ b/tools/testing/selftests/kselftest_install.sh @@ -0,0 +1,37 @@ +#!/bin/bash +# +# Kselftest Install +# Install kselftest tests +# Author: Shuah Khan <shuahkh@osg.samsung.com> +# Copyright (C) 2015 Samsung Electronics Co., Ltd. + +# This software may be freely redistributed under the terms of the GNU +# General Public License (GPLv2). + +install_loc=`pwd` + +main() +{ + if [ $(basename $install_loc) != "selftests" ]; then + echo "$0: Please run it in selftests directory ..." + exit 1; + fi + if [ "$#" -eq 0 ]; then + echo "$0: Installing in default location - $install_loc ..." + elif [ ! -d "$1" ]; then + echo "$0: $1 doesn't exist!!" + exit 1; + else + install_loc=$1 + echo "$0: Installing in specified location - $install_loc ..." + fi + + install_dir=$install_loc/kselftest + +# Create install directory + mkdir -p $install_dir +# Build tests + INSTALL_PATH=$install_dir make install +} + +main "$@" diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk new file mode 100644 index 000000000000..2194155ae62a --- /dev/null +++ b/tools/testing/selftests/lib.mk @@ -0,0 +1,35 @@ +# This mimics the top-level Makefile. We do it explicitly here so that this +# Makefile can operate with or without the kbuild infrastructure. +CC := $(CROSS_COMPILE)gcc + +define RUN_TESTS + @for TEST in $(TEST_PROGS); do \ + (./$$TEST && echo "selftests: $$TEST [PASS]") || echo "selftests: $$TEST [FAIL]"; \ + done; +endef + +run_tests: all + $(RUN_TESTS) + +define INSTALL_RULE + mkdir -p $(INSTALL_PATH) + install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES) +endef + +install: all +ifdef INSTALL_PATH + $(INSTALL_RULE) +else + $(error Error: set INSTALL_PATH to use install) +endif + +define EMIT_TESTS + @for TEST in $(TEST_PROGS); do \ + echo "(./$$TEST && echo \"selftests: $$TEST [PASS]\") || echo \"selftests: $$TEST [FAIL]\""; \ + done; +endef + +emit_tests: + $(EMIT_TESTS) + +.PHONY: run_tests all clean install emit_tests diff --git a/tools/testing/selftests/memfd/Makefile b/tools/testing/selftests/memfd/Makefile index b80cd10d53ba..3e7eb7972511 100644 --- a/tools/testing/selftests/memfd/Makefile +++ b/tools/testing/selftests/memfd/Makefile @@ -1,17 +1,19 @@ +CC = $(CROSS_COMPILE)gcc CFLAGS += -D_FILE_OFFSET_BITS=64 CFLAGS += -I../../../../include/uapi/ CFLAGS += -I../../../../include/ +CFLAGS += -I../../../../usr/include/ all: - gcc $(CFLAGS) memfd_test.c -o memfd_test + $(CC) $(CFLAGS) memfd_test.c -o memfd_test -run_tests: all - gcc $(CFLAGS) memfd_test.c -o memfd_test - @./memfd_test || echo "memfd_test: [FAIL]" +TEST_PROGS := memfd_test + +include ../lib.mk build_fuse: - gcc $(CFLAGS) fuse_mnt.c `pkg-config fuse --cflags --libs` -o fuse_mnt - gcc $(CFLAGS) fuse_test.c -o fuse_test + $(CC) $(CFLAGS) fuse_mnt.c `pkg-config fuse --cflags --libs` -o fuse_mnt + $(CC) $(CFLAGS) fuse_test.c -o fuse_test run_fuse: build_fuse @./run_fuse_test.sh || echo "fuse_test: [FAIL]" diff --git a/tools/testing/selftests/memory-hotplug/Makefile b/tools/testing/selftests/memory-hotplug/Makefile index d46b8d489cd2..afb2624c7048 100644 --- a/tools/testing/selftests/memory-hotplug/Makefile +++ b/tools/testing/selftests/memory-hotplug/Makefile @@ -1,9 +1,12 @@ all: -run_tests: - @/bin/bash ./on-off-test.sh -r 2 || echo "memory-hotplug selftests: [FAIL]" +include ../lib.mk + +TEST_PROGS := mem-on-off-test.sh +override RUN_TESTS := ./mem-on-off-test.sh -r 2 || echo "selftests: memory-hotplug [FAIL]" +override EMIT_TESTS := echo "$(RUN_TESTS)" run_full_test: - @/bin/bash ./on-off-test.sh || echo "memory-hotplug selftests: [FAIL]" + @/bin/bash ./mem-on-off-test.sh || echo "memory-hotplug selftests: [FAIL]" clean: diff --git a/tools/testing/selftests/memory-hotplug/on-off-test.sh b/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh index 6cddde0b96f8..6cddde0b96f8 100644..100755 --- a/tools/testing/selftests/memory-hotplug/on-off-test.sh +++ b/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh diff --git a/tools/testing/selftests/mount/.gitignore b/tools/testing/selftests/mount/.gitignore new file mode 100644 index 000000000000..856ad4107eb3 --- /dev/null +++ b/tools/testing/selftests/mount/.gitignore @@ -0,0 +1 @@ +unprivileged-remount-test diff --git a/tools/testing/selftests/mount/Makefile b/tools/testing/selftests/mount/Makefile index 337d853c2b72..95580a97326e 100644 --- a/tools/testing/selftests/mount/Makefile +++ b/tools/testing/selftests/mount/Makefile @@ -1,17 +1,16 @@ # Makefile for mount selftests. - +CFLAGS = -Wall \ + -O2 all: unprivileged-remount-test unprivileged-remount-test: unprivileged-remount-test.c - gcc -Wall -O2 unprivileged-remount-test.c -o unprivileged-remount-test + $(CC) $(CFLAGS) unprivileged-remount-test.c -o unprivileged-remount-test -# Allow specific tests to be selected. -test_unprivileged_remount: unprivileged-remount-test - @if [ -f /proc/self/uid_map ] ; then ./unprivileged-remount-test ; fi +include ../lib.mk -run_tests: all test_unprivileged_remount +TEST_PROGS := unprivileged-remount-test +override RUN_TESTS := if [ -f /proc/self/uid_map ] ; then ./unprivileged-remount-test ; fi +override EMIT_TESTS := echo "$(RUN_TESTS)" clean: rm -f unprivileged-remount-test - -.PHONY: all test_unprivileged_remount diff --git a/tools/testing/selftests/mqueue/Makefile b/tools/testing/selftests/mqueue/Makefile index 8056e2e68fa4..0e3b41eb85cd 100644 --- a/tools/testing/selftests/mqueue/Makefile +++ b/tools/testing/selftests/mqueue/Makefile @@ -1,10 +1,22 @@ +CFLAGS = -O2 + all: - gcc -O2 mq_open_tests.c -o mq_open_tests -lrt - gcc -O2 -o mq_perf_tests mq_perf_tests.c -lrt -lpthread -lpopt + $(CC) $(CFLAGS) mq_open_tests.c -o mq_open_tests -lrt + $(CC) $(CFLAGS) -o mq_perf_tests mq_perf_tests.c -lrt -lpthread -lpopt + +include ../lib.mk + +override define RUN_TESTS + @./mq_open_tests /test1 || echo "selftests: mq_open_tests [FAIL]" + @./mq_perf_tests || echo "selftests: mq_perf_tests [FAIL]" +endef + +TEST_PROGS := mq_open_tests mq_perf_tests -run_tests: - @./mq_open_tests /test1 || echo "mq_open_tests: [FAIL]" - @./mq_perf_tests || echo "mq_perf_tests: [FAIL]" +override define EMIT_TESTS + echo "./mq_open_tests /test1 || echo \"selftests: mq_open_tests [FAIL]\"" + echo "./mq_perf_tests || echo \"selftests: mq_perf_tests [FAIL]\"" +endef clean: rm -f mq_open_tests mq_perf_tests diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 62f22cc9941c..fac4782c51d8 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -1,6 +1,5 @@ # Makefile for net selftests -CC = $(CROSS_COMPILE)gcc CFLAGS = -Wall -O2 -g CFLAGS += -I../../../../usr/include/ @@ -11,9 +10,10 @@ all: $(NET_PROGS) %: %.c $(CC) $(CFLAGS) -o $@ $^ -run_tests: all - @/bin/sh ./run_netsocktests || echo "sockettests: [FAIL]" - @/bin/sh ./run_afpackettests || echo "afpackettests: [FAIL]" - ./test_bpf.sh +TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh +TEST_FILES := $(NET_PROGS) + +include ../lib.mk + clean: $(RM) $(NET_PROGS) diff --git a/tools/testing/selftests/net/run_afpackettests b/tools/testing/selftests/net/run_afpackettests index 5246e782d6e8..5246e782d6e8 100644..100755 --- a/tools/testing/selftests/net/run_afpackettests +++ b/tools/testing/selftests/net/run_afpackettests diff --git a/tools/testing/selftests/net/run_netsocktests b/tools/testing/selftests/net/run_netsocktests index c09a682df56a..c09a682df56a 100644..100755 --- a/tools/testing/selftests/net/run_netsocktests +++ b/tools/testing/selftests/net/run_netsocktests diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile index 1d5e7ad2c460..2958fe9a74e9 100644 --- a/tools/testing/selftests/powerpc/Makefile +++ b/tools/testing/selftests/powerpc/Makefile @@ -8,10 +8,9 @@ ifeq ($(ARCH),powerpc) GIT_VERSION = $(shell git describe --always --long --dirty || echo "unknown") -CC := $(CROSS_COMPILE)$(CC) CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CURDIR) $(CFLAGS) -export CC CFLAGS +export CFLAGS TARGETS = pmu copyloops mm tm primitives stringloops @@ -22,10 +21,25 @@ all: $(TARGETS) $(TARGETS): $(MAKE) -k -C $@ all -run_tests: all +include ../lib.mk + +override define RUN_TESTS @for TARGET in $(TARGETS); do \ $(MAKE) -C $$TARGET run_tests; \ done; +endef + +override define INSTALL_RULE + @for TARGET in $(TARGETS); do \ + $(MAKE) -C $$TARGET install; \ + done; +endef + +override define EMIT_TESTS + @for TARGET in $(TARGETS); do \ + $(MAKE) -s -C $$TARGET emit_tests; \ + done; +endef clean: @for TARGET in $(TARGETS); do \ @@ -36,4 +50,4 @@ clean: tags: find . -name '*.c' -o -name '*.h' | xargs ctags -.PHONY: all run_tests clean tags $(TARGETS) +.PHONY: tags $(TARGETS) diff --git a/tools/testing/selftests/powerpc/copyloops/Makefile b/tools/testing/selftests/powerpc/copyloops/Makefile index 6f2d3be227f9..c05023514ce8 100644 --- a/tools/testing/selftests/powerpc/copyloops/Makefile +++ b/tools/testing/selftests/powerpc/copyloops/Makefile @@ -6,24 +6,19 @@ CFLAGS += -D SELFTEST # Use our CFLAGS for the implicit .S rule ASFLAGS = $(CFLAGS) -PROGS := copyuser_64 copyuser_power7 memcpy_64 memcpy_power7 +TEST_PROGS := copyuser_64 copyuser_power7 memcpy_64 memcpy_power7 EXTRA_SOURCES := validate.c ../harness.c -all: $(PROGS) +all: $(TEST_PROGS) copyuser_64: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_base copyuser_power7: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_power7 memcpy_64: CPPFLAGS += -D COPY_LOOP=test_memcpy memcpy_power7: CPPFLAGS += -D COPY_LOOP=test_memcpy_power7 -$(PROGS): $(EXTRA_SOURCES) +$(TEST_PROGS): $(EXTRA_SOURCES) -run_tests: all - @-for PROG in $(PROGS); do \ - ./$$PROG; \ - done; +include ../../lib.mk clean: - rm -f $(PROGS) *.o - -.PHONY: all run_tests clean + rm -f $(TEST_PROGS) *.o diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile index a14c538dd7f8..41cc3ed66818 100644 --- a/tools/testing/selftests/powerpc/mm/Makefile +++ b/tools/testing/selftests/powerpc/mm/Makefile @@ -1,21 +1,16 @@ noarg: $(MAKE) -C ../ -PROGS := hugetlb_vs_thp_test subpage_prot +TEST_PROGS := hugetlb_vs_thp_test subpage_prot -all: $(PROGS) tempfile +all: $(TEST_PROGS) tempfile -$(PROGS): ../harness.c +$(TEST_PROGS): ../harness.c -run_tests: all - @-for PROG in $(PROGS); do \ - ./$$PROG; \ - done; +include ../../lib.mk tempfile: dd if=/dev/zero of=tempfile bs=64k count=1 clean: - rm -f $(PROGS) tempfile - -.PHONY: all run_tests clean + rm -f $(TEST_PROGS) tempfile diff --git a/tools/testing/selftests/powerpc/pmu/Makefile b/tools/testing/selftests/powerpc/pmu/Makefile index c9f4263906a5..5a161175bbd4 100644 --- a/tools/testing/selftests/powerpc/pmu/Makefile +++ b/tools/testing/selftests/powerpc/pmu/Makefile @@ -1,38 +1,42 @@ noarg: $(MAKE) -C ../ -PROGS := count_instructions l3_bank_test per_event_excludes +TEST_PROGS := count_instructions l3_bank_test per_event_excludes EXTRA_SOURCES := ../harness.c event.c lib.c -SUB_TARGETS = ebb +all: $(TEST_PROGS) ebb -all: $(PROGS) $(SUB_TARGETS) - -$(PROGS): $(EXTRA_SOURCES) +$(TEST_PROGS): $(EXTRA_SOURCES) # loop.S can only be built 64-bit count_instructions: loop.S count_instructions.c $(EXTRA_SOURCES) $(CC) $(CFLAGS) -m64 -o $@ $^ -run_tests: all sub_run_tests - @-for PROG in $(PROGS); do \ - ./$$PROG; \ - done; +include ../../lib.mk -clean: sub_clean - rm -f $(PROGS) loop.o +DEFAULT_RUN_TESTS := $(RUN_TESTS) +override define RUN_TESTS + $(DEFAULT_RUN_TESTS) + $(MAKE) -C ebb run_tests +endef -$(SUB_TARGETS): - $(MAKE) -k -C $@ all +DEFAULT_EMIT_TESTS := $(EMIT_TESTS) +override define EMIT_TESTS + $(DEFAULT_EMIT_TESTS) + $(MAKE) -s -C ebb emit_tests +endef -sub_run_tests: all - @for TARGET in $(SUB_TARGETS); do \ - $(MAKE) -C $$TARGET run_tests; \ - done; +DEFAULT_INSTALL := $(INSTALL_RULE) +override define INSTALL_RULE + $(DEFAULT_INSTALL_RULE) + $(MAKE) -C ebb install +endef -sub_clean: - @for TARGET in $(SUB_TARGETS); do \ - $(MAKE) -C $$TARGET clean; \ - done; +clean: + rm -f $(TEST_PROGS) loop.o + $(MAKE) -C ebb clean + +ebb: + $(MAKE) -k -C $@ all -.PHONY: all run_tests clean sub_run_tests sub_clean $(SUB_TARGETS) +.PHONY: all run_tests clean ebb diff --git a/tools/testing/selftests/powerpc/pmu/ebb/Makefile b/tools/testing/selftests/powerpc/pmu/ebb/Makefile index 3dc4332698cb..5cdc9dbf2b27 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/Makefile +++ b/tools/testing/selftests/powerpc/pmu/ebb/Makefile @@ -4,7 +4,7 @@ noarg: # The EBB handler is 64-bit code and everything links against it CFLAGS += -m64 -PROGS := reg_access_test event_attributes_test cycles_test \ +TEST_PROGS := reg_access_test event_attributes_test cycles_test \ cycles_with_freeze_test pmc56_overflow_test \ ebb_vs_cpu_event_test cpu_event_vs_ebb_test \ cpu_event_pinned_vs_ebb_test task_event_vs_ebb_test \ @@ -16,18 +16,15 @@ PROGS := reg_access_test event_attributes_test cycles_test \ lost_exception_test no_handler_test \ cycles_with_mmcr2_test -all: $(PROGS) +all: $(TEST_PROGS) -$(PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c busy_loop.S +$(TEST_PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c busy_loop.S instruction_count_test: ../loop.S lost_exception_test: ../lib.c -run_tests: all - @-for PROG in $(PROGS); do \ - ./$$PROG; \ - done; +include ../../../lib.mk clean: - rm -f $(PROGS) + rm -f $(TEST_PROGS) diff --git a/tools/testing/selftests/powerpc/primitives/Makefile b/tools/testing/selftests/powerpc/primitives/Makefile index ea737ca01732..b68c6221d3d1 100644 --- a/tools/testing/selftests/powerpc/primitives/Makefile +++ b/tools/testing/selftests/powerpc/primitives/Makefile @@ -1,17 +1,12 @@ CFLAGS += -I$(CURDIR) -PROGS := load_unaligned_zeropad +TEST_PROGS := load_unaligned_zeropad -all: $(PROGS) +all: $(TEST_PROGS) -$(PROGS): ../harness.c +$(TEST_PROGS): ../harness.c -run_tests: all - @-for PROG in $(PROGS); do \ - ./$$PROG; \ - done; +include ../../lib.mk clean: - rm -f $(PROGS) *.o - -.PHONY: all run_tests clean + rm -f $(TEST_PROGS) *.o diff --git a/tools/testing/selftests/powerpc/stringloops/Makefile b/tools/testing/selftests/powerpc/stringloops/Makefile index 506d77346477..2a728f4d2873 100644 --- a/tools/testing/selftests/powerpc/stringloops/Makefile +++ b/tools/testing/selftests/powerpc/stringloops/Makefile @@ -2,19 +2,14 @@ CFLAGS += -m64 CFLAGS += -I$(CURDIR) -PROGS := memcmp +TEST_PROGS := memcmp EXTRA_SOURCES := memcmp_64.S ../harness.c -all: $(PROGS) +all: $(TEST_PROGS) -$(PROGS): $(EXTRA_SOURCES) +$(TEST_PROGS): $(EXTRA_SOURCES) -run_tests: all - @-for PROG in $(PROGS); do \ - ./$$PROG; \ - done; +include ../../lib.mk clean: - rm -f $(PROGS) *.o - -.PHONY: all run_tests clean + rm -f $(TEST_PROGS) *.o diff --git a/tools/testing/selftests/powerpc/tm/Makefile b/tools/testing/selftests/powerpc/tm/Makefile index 2cede239a074..34f2ec634b40 100644 --- a/tools/testing/selftests/powerpc/tm/Makefile +++ b/tools/testing/selftests/powerpc/tm/Makefile @@ -1,15 +1,10 @@ -PROGS := tm-resched-dscr +TEST_PROGS := tm-resched-dscr -all: $(PROGS) +all: $(TEST_PROGS) -$(PROGS): ../harness.c +$(TEST_PROGS): ../harness.c -run_tests: all - @-for PROG in $(PROGS); do \ - ./$$PROG; \ - done; +include ../../lib.mk clean: - rm -f $(PROGS) *.o - -.PHONY: all run_tests clean + rm -f $(TEST_PROGS) *.o diff --git a/tools/testing/selftests/ptrace/Makefile b/tools/testing/selftests/ptrace/Makefile index 47ae2d385ce8..453927fea90c 100644 --- a/tools/testing/selftests/ptrace/Makefile +++ b/tools/testing/selftests/ptrace/Makefile @@ -6,5 +6,6 @@ all: peeksiginfo clean: rm -f peeksiginfo -run_tests: all - @./peeksiginfo || echo "peeksiginfo selftests: [FAIL]" +TEST_PROGS := peeksiginfo + +include ../lib.mk diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index 368d64ac779e..dd2812ceb0ba 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -310,7 +310,7 @@ function dump(first, pastlast) cfr[jn] = cf[j] "." cfrep[cf[j]]; } if (cpusr[jn] > ncpus && ncpus != 0) - ovf = "(!)"; + ovf = "-ovf"; else ovf = ""; print "echo ", cfr[jn], cpusr[jn] ovf ": Starting build. `date`"; diff --git a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon index d2d2a86139db..49701218dc62 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/CFcommon +++ b/tools/testing/selftests/rcutorture/configs/rcu/CFcommon @@ -1,2 +1,3 @@ CONFIG_RCU_TORTURE_TEST=y CONFIG_PRINTK_TIME=y +CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y diff --git a/tools/testing/selftests/size/Makefile b/tools/testing/selftests/size/Makefile index 04dc25e4fa92..bbd0b5398b61 100644 --- a/tools/testing/selftests/size/Makefile +++ b/tools/testing/selftests/size/Makefile @@ -1,12 +1,11 @@ -CC = $(CROSS_COMPILE)gcc - all: get_size get_size: get_size.c $(CC) -static -ffreestanding -nostartfiles -s $< -o $@ -run_tests: all - ./get_size +TEST_PROGS := get_size + +include ../lib.mk clean: $(RM) get_size diff --git a/tools/testing/selftests/sysctl/Makefile b/tools/testing/selftests/sysctl/Makefile index 0a92adaf0865..b3c33e071f10 100644 --- a/tools/testing/selftests/sysctl/Makefile +++ b/tools/testing/selftests/sysctl/Makefile @@ -4,16 +4,10 @@ # No binaries, but make sure arg-less "make" doesn't trigger "run_tests". all: -# Allow specific tests to be selected. -test_num: - @/bin/sh ./run_numerictests +TEST_PROGS := run_numerictests run_stringtests +TEST_FILES := common_tests -test_string: - @/bin/sh ./run_stringtests - -run_tests: all test_num test_string +include ../lib.mk # Nothing to clean up. clean: - -.PHONY: all run_tests clean test_num test_string diff --git a/tools/testing/selftests/sysctl/run_numerictests b/tools/testing/selftests/sysctl/run_numerictests index 8510f93f2d14..8510f93f2d14 100644..100755 --- a/tools/testing/selftests/sysctl/run_numerictests +++ b/tools/testing/selftests/sysctl/run_numerictests diff --git a/tools/testing/selftests/sysctl/run_stringtests b/tools/testing/selftests/sysctl/run_stringtests index 90a9293d520c..90a9293d520c 100644..100755 --- a/tools/testing/selftests/sysctl/run_stringtests +++ b/tools/testing/selftests/sysctl/run_stringtests diff --git a/tools/testing/selftests/timers/Makefile b/tools/testing/selftests/timers/Makefile index eb2859f4ad21..89a3f44bf355 100644 --- a/tools/testing/selftests/timers/Makefile +++ b/tools/testing/selftests/timers/Makefile @@ -1,8 +1,36 @@ -all: - gcc posix_timers.c -o posix_timers -lrt +CC = $(CROSS_COMPILE)gcc +BUILD_FLAGS = -DKTEST +CFLAGS += -O3 -Wl,-no-as-needed -Wall $(BUILD_FLAGS) +LDFLAGS += -lrt -lpthread -run_tests: all - ./posix_timers +# these are all "safe" tests that don't modify +# system time or require escalated privledges +TEST_PROGS = posix_timers nanosleep nsleep-lat set-timer-lat mqueue-lat \ + inconsistency-check raw_skew threadtest rtctest + +TEST_PROGS_EXTENDED = alarmtimer-suspend valid-adjtimex change_skew \ + skew_consistency clocksource-switch leap-a-day \ + leapcrash set-tai set-2038 + +bins = $(TEST_PROGS) $(TEST_PROGS_EXTENDED) + +all: ${bins} + +include ../lib.mk + +# these tests require escalated privledges +# and may modify the system time or trigger +# other behavior like suspend +run_destructive_tests: run_tests + ./alarmtimer-suspend + ./valid-adjtimex + ./change_skew + ./skew_consistency + ./clocksource-switch + ./leap-a-day -s -i 10 + ./leapcrash + ./set-tai + ./set-2038 clean: - rm -f ./posix_timers + rm -f ${bins} diff --git a/tools/testing/selftests/timers/alarmtimer-suspend.c b/tools/testing/selftests/timers/alarmtimer-suspend.c new file mode 100644 index 000000000000..aaffbde1d5ee --- /dev/null +++ b/tools/testing/selftests/timers/alarmtimer-suspend.c @@ -0,0 +1,185 @@ +/* alarmtimer suspend test + * John Stultz (john.stultz@linaro.org) + * (C) Copyright Linaro 2013 + * Licensed under the GPLv2 + * + * This test makes sure the alarmtimer & RTC wakeup code is + * functioning. + * + * To build: + * $ gcc alarmtimer-suspend.c -o alarmtimer-suspend -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <stdio.h> +#include <unistd.h> +#include <time.h> +#include <string.h> +#include <signal.h> +#include <stdlib.h> +#include <pthread.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define CLOCK_REALTIME 0 +#define CLOCK_MONOTONIC 1 +#define CLOCK_PROCESS_CPUTIME_ID 2 +#define CLOCK_THREAD_CPUTIME_ID 3 +#define CLOCK_MONOTONIC_RAW 4 +#define CLOCK_REALTIME_COARSE 5 +#define CLOCK_MONOTONIC_COARSE 6 +#define CLOCK_BOOTTIME 7 +#define CLOCK_REALTIME_ALARM 8 +#define CLOCK_BOOTTIME_ALARM 9 +#define CLOCK_HWSPECIFIC 10 +#define CLOCK_TAI 11 +#define NR_CLOCKIDS 12 + + +#define NSEC_PER_SEC 1000000000ULL +#define UNREASONABLE_LAT (NSEC_PER_SEC * 4) /* hopefully we resume in 4secs */ + +#define SUSPEND_SECS 15 +int alarmcount; +int alarm_clock_id; +struct timespec start_time; + + +char *clockstring(int clockid) +{ + switch (clockid) { + case CLOCK_REALTIME: + return "CLOCK_REALTIME"; + case CLOCK_MONOTONIC: + return "CLOCK_MONOTONIC"; + case CLOCK_PROCESS_CPUTIME_ID: + return "CLOCK_PROCESS_CPUTIME_ID"; + case CLOCK_THREAD_CPUTIME_ID: + return "CLOCK_THREAD_CPUTIME_ID"; + case CLOCK_MONOTONIC_RAW: + return "CLOCK_MONOTONIC_RAW"; + case CLOCK_REALTIME_COARSE: + return "CLOCK_REALTIME_COARSE"; + case CLOCK_MONOTONIC_COARSE: + return "CLOCK_MONOTONIC_COARSE"; + case CLOCK_BOOTTIME: + return "CLOCK_BOOTTIME"; + case CLOCK_REALTIME_ALARM: + return "CLOCK_REALTIME_ALARM"; + case CLOCK_BOOTTIME_ALARM: + return "CLOCK_BOOTTIME_ALARM"; + case CLOCK_TAI: + return "CLOCK_TAI"; + }; + return "UNKNOWN_CLOCKID"; +} + + +long long timespec_sub(struct timespec a, struct timespec b) +{ + long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec; + + ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec; + return ret; +} + +int final_ret = 0; + +void sigalarm(int signo) +{ + long long delta_ns; + struct timespec ts; + + clock_gettime(alarm_clock_id, &ts); + alarmcount++; + + delta_ns = timespec_sub(start_time, ts); + delta_ns -= NSEC_PER_SEC * SUSPEND_SECS * alarmcount; + + printf("ALARM(%i): %ld:%ld latency: %lld ns ", alarmcount, ts.tv_sec, + ts.tv_nsec, delta_ns); + + if (delta_ns > UNREASONABLE_LAT) { + printf("[FAIL]\n"); + final_ret = -1; + } else + printf("[OK]\n"); + +} + +int main(void) +{ + timer_t tm1; + struct itimerspec its1, its2; + struct sigevent se; + struct sigaction act; + int signum = SIGRTMAX; + + /* Set up signal handler: */ + sigfillset(&act.sa_mask); + act.sa_flags = 0; + act.sa_handler = sigalarm; + sigaction(signum, &act, NULL); + + /* Set up timer: */ + memset(&se, 0, sizeof(se)); + se.sigev_notify = SIGEV_SIGNAL; + se.sigev_signo = signum; + se.sigev_value.sival_int = 0; + + for (alarm_clock_id = CLOCK_REALTIME_ALARM; + alarm_clock_id <= CLOCK_BOOTTIME_ALARM; + alarm_clock_id++) { + + alarmcount = 0; + timer_create(alarm_clock_id, &se, &tm1); + + clock_gettime(alarm_clock_id, &start_time); + printf("Start time (%s): %ld:%ld\n", clockstring(alarm_clock_id), + start_time.tv_sec, start_time.tv_nsec); + printf("Setting alarm for every %i seconds\n", SUSPEND_SECS); + its1.it_value = start_time; + its1.it_value.tv_sec += SUSPEND_SECS; + its1.it_interval.tv_sec = SUSPEND_SECS; + its1.it_interval.tv_nsec = 0; + + timer_settime(tm1, TIMER_ABSTIME, &its1, &its2); + + while (alarmcount < 5) + sleep(1); /* First 5 alarms, do nothing */ + + printf("Starting suspend loops\n"); + while (alarmcount < 10) { + int ret; + + sleep(1); + ret = system("echo mem > /sys/power/state"); + if (ret) + break; + } + timer_delete(tm1); + } + if (final_ret) + return ksft_exit_fail(); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/change_skew.c b/tools/testing/selftests/timers/change_skew.c new file mode 100644 index 000000000000..cb1968977c04 --- /dev/null +++ b/tools/testing/selftests/timers/change_skew.c @@ -0,0 +1,107 @@ +/* ADJ_FREQ Skew change test + * by: john stultz (johnstul@us.ibm.com) + * (C) Copyright IBM 2012 + * Licensed under the GPLv2 + * + * NOTE: This is a meta-test which cranks the ADJ_FREQ knob and + * then uses other tests to detect problems. Thus this test requires + * that the raw_skew, inconsistency-check and nanosleep tests be + * present in the same directory it is run from. + * + * To build: + * $ gcc change_skew.c -o change_skew -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <stdio.h> +#include <stdlib.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <time.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define NSEC_PER_SEC 1000000000LL + + +int change_skew_test(int ppm) +{ + struct timex tx; + int ret; + + tx.modes = ADJ_FREQUENCY; + tx.freq = ppm << 16; + + ret = adjtimex(&tx); + if (ret < 0) { + printf("Error adjusting freq\n"); + return ret; + } + + ret = system("./raw_skew"); + ret |= system("./inconsistency-check"); + ret |= system("./nanosleep"); + + return ret; +} + + +int main(int argv, char **argc) +{ + struct timex tx; + int i, ret; + + int ppm[5] = {0, 250, 500, -250, -500}; + + /* Kill ntpd */ + ret = system("killall -9 ntpd"); + + /* Make sure there's no offset adjustment going on */ + tx.modes = ADJ_OFFSET; + tx.offset = 0; + ret = adjtimex(&tx); + + if (ret < 0) { + printf("Maybe you're not running as root?\n"); + return -1; + } + + for (i = 0; i < 5; i++) { + printf("Using %i ppm adjustment\n", ppm[i]); + ret = change_skew_test(ppm[i]); + if (ret) + break; + } + + /* Set things back */ + tx.modes = ADJ_FREQUENCY; + tx.offset = 0; + adjtimex(&tx); + + if (ret) { + printf("[FAIL]"); + return ksft_exit_fail(); + } + printf("[OK]"); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/clocksource-switch.c b/tools/testing/selftests/timers/clocksource-switch.c new file mode 100644 index 000000000000..627ec7425f78 --- /dev/null +++ b/tools/testing/selftests/timers/clocksource-switch.c @@ -0,0 +1,179 @@ +/* Clocksource change test + * by: john stultz (johnstul@us.ibm.com) + * (C) Copyright IBM 2012 + * Licensed under the GPLv2 + * + * NOTE: This is a meta-test which quickly changes the clocksourc and + * then uses other tests to detect problems. Thus this test requires + * that the inconsistency-check and nanosleep tests be present in the + * same directory it is run from. + * + * To build: + * $ gcc clocksource-switch.c -o clocksource-switch -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <time.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <string.h> +#include <sys/wait.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + + +int get_clocksources(char list[][30]) +{ + int fd, i; + size_t size; + char buf[512]; + char *head, *tmp; + + fd = open("/sys/devices/system/clocksource/clocksource0/available_clocksource", O_RDONLY); + + size = read(fd, buf, 512); + + close(fd); + + for (i = 0; i < 30; i++) + list[i][0] = '\0'; + + head = buf; + i = 0; + while (head - buf < size) { + /* Find the next space */ + for (tmp = head; *tmp != ' '; tmp++) { + if (*tmp == '\n') + break; + if (*tmp == '\0') + break; + } + *tmp = '\0'; + strcpy(list[i], head); + head = tmp + 1; + i++; + } + + return i-1; +} + +int get_cur_clocksource(char *buf, size_t size) +{ + int fd; + + fd = open("/sys/devices/system/clocksource/clocksource0/current_clocksource", O_RDONLY); + + size = read(fd, buf, size); + + return 0; +} + +int change_clocksource(char *clocksource) +{ + int fd; + size_t size; + + fd = open("/sys/devices/system/clocksource/clocksource0/current_clocksource", O_WRONLY); + + if (fd < 0) + return -1; + + size = write(fd, clocksource, strlen(clocksource)); + + if (size < 0) + return -1; + + close(fd); + return 0; +} + + +int run_tests(int secs) +{ + int ret; + char buf[255]; + + sprintf(buf, "./inconsistency-check -t %i", secs); + ret = system(buf); + if (ret) + return ret; + ret = system("./nanosleep"); + return ret; +} + + +char clocksource_list[10][30]; + +int main(int argv, char **argc) +{ + char orig_clk[512]; + int count, i, status; + pid_t pid; + + get_cur_clocksource(orig_clk, 512); + + count = get_clocksources(clocksource_list); + + if (change_clocksource(clocksource_list[0])) { + printf("Error: You probably need to run this as root\n"); + return -1; + } + + /* Check everything is sane before we start switching asyncrhonously */ + for (i = 0; i < count; i++) { + printf("Validating clocksource %s\n", clocksource_list[i]); + if (change_clocksource(clocksource_list[i])) { + status = -1; + goto out; + } + if (run_tests(5)) { + status = -1; + goto out; + } + } + + + printf("Running Asyncrhonous Switching Tests...\n"); + pid = fork(); + if (!pid) + return run_tests(60); + + while (pid != waitpid(pid, &status, WNOHANG)) + for (i = 0; i < count; i++) + if (change_clocksource(clocksource_list[i])) { + status = -1; + goto out; + } +out: + change_clocksource(orig_clk); + + if (status) + return ksft_exit_fail(); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/inconsistency-check.c b/tools/testing/selftests/timers/inconsistency-check.c new file mode 100644 index 000000000000..caf1bc9257c4 --- /dev/null +++ b/tools/testing/selftests/timers/inconsistency-check.c @@ -0,0 +1,204 @@ +/* Time inconsistency check test + * by: john stultz (johnstul@us.ibm.com) + * (C) Copyright IBM 2003, 2004, 2005, 2012 + * (C) Copyright Linaro Limited 2015 + * Licensed under the GPLv2 + * + * To build: + * $ gcc inconsistency-check.c -o inconsistency-check -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + + +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <time.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <string.h> +#include <signal.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define CALLS_PER_LOOP 64 +#define NSEC_PER_SEC 1000000000ULL + +#define CLOCK_REALTIME 0 +#define CLOCK_MONOTONIC 1 +#define CLOCK_PROCESS_CPUTIME_ID 2 +#define CLOCK_THREAD_CPUTIME_ID 3 +#define CLOCK_MONOTONIC_RAW 4 +#define CLOCK_REALTIME_COARSE 5 +#define CLOCK_MONOTONIC_COARSE 6 +#define CLOCK_BOOTTIME 7 +#define CLOCK_REALTIME_ALARM 8 +#define CLOCK_BOOTTIME_ALARM 9 +#define CLOCK_HWSPECIFIC 10 +#define CLOCK_TAI 11 +#define NR_CLOCKIDS 12 + +char *clockstring(int clockid) +{ + switch (clockid) { + case CLOCK_REALTIME: + return "CLOCK_REALTIME"; + case CLOCK_MONOTONIC: + return "CLOCK_MONOTONIC"; + case CLOCK_PROCESS_CPUTIME_ID: + return "CLOCK_PROCESS_CPUTIME_ID"; + case CLOCK_THREAD_CPUTIME_ID: + return "CLOCK_THREAD_CPUTIME_ID"; + case CLOCK_MONOTONIC_RAW: + return "CLOCK_MONOTONIC_RAW"; + case CLOCK_REALTIME_COARSE: + return "CLOCK_REALTIME_COARSE"; + case CLOCK_MONOTONIC_COARSE: + return "CLOCK_MONOTONIC_COARSE"; + case CLOCK_BOOTTIME: + return "CLOCK_BOOTTIME"; + case CLOCK_REALTIME_ALARM: + return "CLOCK_REALTIME_ALARM"; + case CLOCK_BOOTTIME_ALARM: + return "CLOCK_BOOTTIME_ALARM"; + case CLOCK_TAI: + return "CLOCK_TAI"; + }; + return "UNKNOWN_CLOCKID"; +} + +/* returns 1 if a <= b, 0 otherwise */ +static inline int in_order(struct timespec a, struct timespec b) +{ + /* use unsigned to avoid false positives on 2038 rollover */ + if ((unsigned long)a.tv_sec < (unsigned long)b.tv_sec) + return 1; + if ((unsigned long)a.tv_sec > (unsigned long)b.tv_sec) + return 0; + if (a.tv_nsec > b.tv_nsec) + return 0; + return 1; +} + + + +int consistency_test(int clock_type, unsigned long seconds) +{ + struct timespec list[CALLS_PER_LOOP]; + int i, inconsistent; + long now, then; + time_t t; + char *start_str; + + clock_gettime(clock_type, &list[0]); + now = then = list[0].tv_sec; + + /* timestamp start of test */ + t = time(0); + start_str = ctime(&t); + + while (seconds == -1 || now - then < seconds) { + inconsistent = 0; + + /* Fill list */ + for (i = 0; i < CALLS_PER_LOOP; i++) + clock_gettime(clock_type, &list[i]); + + /* Check for inconsistencies */ + for (i = 0; i < CALLS_PER_LOOP - 1; i++) + if (!in_order(list[i], list[i+1])) + inconsistent = i; + + /* display inconsistency */ + if (inconsistent) { + unsigned long long delta; + + printf("\%s\n", start_str); + for (i = 0; i < CALLS_PER_LOOP; i++) { + if (i == inconsistent) + printf("--------------------\n"); + printf("%lu:%lu\n", list[i].tv_sec, + list[i].tv_nsec); + if (i == inconsistent + 1) + printf("--------------------\n"); + } + delta = list[inconsistent].tv_sec * NSEC_PER_SEC; + delta += list[inconsistent].tv_nsec; + delta -= list[inconsistent+1].tv_sec * NSEC_PER_SEC; + delta -= list[inconsistent+1].tv_nsec; + printf("Delta: %llu ns\n", delta); + fflush(0); + /* timestamp inconsistency*/ + t = time(0); + printf("%s\n", ctime(&t)); + printf("[FAILED]\n"); + return -1; + } + now = list[0].tv_sec; + } + printf("[OK]\n"); + return 0; +} + + +int main(int argc, char *argv[]) +{ + int clockid, opt; + int userclock = CLOCK_REALTIME; + int maxclocks = NR_CLOCKIDS; + int runtime = 10; + struct timespec ts; + + /* Process arguments */ + while ((opt = getopt(argc, argv, "t:c:")) != -1) { + switch (opt) { + case 't': + runtime = atoi(optarg); + break; + case 'c': + userclock = atoi(optarg); + maxclocks = userclock + 1; + break; + default: + printf("Usage: %s [-t <secs>] [-c <clockid>]\n", argv[0]); + printf(" -t: Number of seconds to run\n"); + printf(" -c: clockid to use (default, all clockids)\n"); + exit(-1); + } + } + + setbuf(stdout, NULL); + + for (clockid = userclock; clockid < maxclocks; clockid++) { + + if (clockid == CLOCK_HWSPECIFIC) + continue; + + if (!clock_gettime(clockid, &ts)) { + printf("Consistent %-30s ", clockstring(clockid)); + if (consistency_test(clockid, runtime)) + return ksft_exit_fail(); + } + } + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/leap-a-day.c b/tools/testing/selftests/timers/leap-a-day.c new file mode 100644 index 000000000000..b8272e6c4b3b --- /dev/null +++ b/tools/testing/selftests/timers/leap-a-day.c @@ -0,0 +1,319 @@ +/* Leap second stress test + * by: John Stultz (john.stultz@linaro.org) + * (C) Copyright IBM 2012 + * (C) Copyright 2013, 2015 Linaro Limited + * Licensed under the GPLv2 + * + * This test signals the kernel to insert a leap second + * every day at midnight GMT. This allows for stessing the + * kernel's leap-second behavior, as well as how well applications + * handle the leap-second discontinuity. + * + * Usage: leap-a-day [-s] [-i <num>] + * + * Options: + * -s: Each iteration, set the date to 10 seconds before midnight GMT. + * This speeds up the number of leapsecond transitions tested, + * but because it calls settimeofday frequently, advancing the + * time by 24 hours every ~16 seconds, it may cause application + * disruption. + * + * -i: Number of iterations to run (default: infinite) + * + * Other notes: Disabling NTP prior to running this is advised, as the two + * may conflict in their commands to the kernel. + * + * To build: + * $ gcc leap-a-day.c -o leap-a-day -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + + +#include <stdio.h> +#include <stdlib.h> +#include <time.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <string.h> +#include <signal.h> +#include <unistd.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define NSEC_PER_SEC 1000000000ULL +#define CLOCK_TAI 11 + +/* returns 1 if a <= b, 0 otherwise */ +static inline int in_order(struct timespec a, struct timespec b) +{ + if (a.tv_sec < b.tv_sec) + return 1; + if (a.tv_sec > b.tv_sec) + return 0; + if (a.tv_nsec > b.tv_nsec) + return 0; + return 1; +} + +struct timespec timespec_add(struct timespec ts, unsigned long long ns) +{ + ts.tv_nsec += ns; + while (ts.tv_nsec >= NSEC_PER_SEC) { + ts.tv_nsec -= NSEC_PER_SEC; + ts.tv_sec++; + } + return ts; +} + +char *time_state_str(int state) +{ + switch (state) { + case TIME_OK: return "TIME_OK"; + case TIME_INS: return "TIME_INS"; + case TIME_DEL: return "TIME_DEL"; + case TIME_OOP: return "TIME_OOP"; + case TIME_WAIT: return "TIME_WAIT"; + case TIME_BAD: return "TIME_BAD"; + } + return "ERROR"; +} + +/* clear NTP time_status & time_state */ +int clear_time_state(void) +{ + struct timex tx; + int ret; + + /* + * We have to call adjtime twice here, as kernels + * prior to 6b1859dba01c7 (included in 3.5 and + * -stable), had an issue with the state machine + * and wouldn't clear the STA_INS/DEL flag directly. + */ + tx.modes = ADJ_STATUS; + tx.status = STA_PLL; + ret = adjtimex(&tx); + + /* Clear maxerror, as it can cause UNSYNC to be set */ + tx.modes = ADJ_MAXERROR; + tx.maxerror = 0; + ret = adjtimex(&tx); + + /* Clear the status */ + tx.modes = ADJ_STATUS; + tx.status = 0; + ret = adjtimex(&tx); + + return ret; +} + +/* Make sure we cleanup on ctrl-c */ +void handler(int unused) +{ + clear_time_state(); + exit(0); +} + +/* Test for known hrtimer failure */ +void test_hrtimer_failure(void) +{ + struct timespec now, target; + + clock_gettime(CLOCK_REALTIME, &now); + target = timespec_add(now, NSEC_PER_SEC/2); + clock_nanosleep(CLOCK_REALTIME, TIMER_ABSTIME, &target, NULL); + clock_gettime(CLOCK_REALTIME, &now); + + if (!in_order(target, now)) + printf("ERROR: hrtimer early expiration failure observed.\n"); +} + +int main(int argc, char **argv) +{ + int settime = 0; + int tai_time = 0; + int insert = 1; + int iterations = -1; + int opt; + + /* Process arguments */ + while ((opt = getopt(argc, argv, "sti:")) != -1) { + switch (opt) { + case 's': + printf("Setting time to speed up testing\n"); + settime = 1; + break; + case 'i': + iterations = atoi(optarg); + break; + case 't': + tai_time = 1; + break; + default: + printf("Usage: %s [-s] [-i <iterations>]\n", argv[0]); + printf(" -s: Set time to right before leap second each iteration\n"); + printf(" -i: Number of iterations\n"); + printf(" -t: Print TAI time\n"); + exit(-1); + } + } + + /* Make sure TAI support is present if -t was used */ + if (tai_time) { + struct timespec ts; + + if (clock_gettime(CLOCK_TAI, &ts)) { + printf("System doesn't support CLOCK_TAI\n"); + ksft_exit_fail(); + } + } + + signal(SIGINT, handler); + signal(SIGKILL, handler); + + if (iterations < 0) + printf("This runs continuously. Press ctrl-c to stop\n"); + else + printf("Running for %i iterations. Press ctrl-c to stop\n", iterations); + + printf("\n"); + while (1) { + int ret; + struct timespec ts; + struct timex tx; + time_t now, next_leap; + + /* Get the current time */ + clock_gettime(CLOCK_REALTIME, &ts); + + /* Calculate the next possible leap second 23:59:60 GMT */ + next_leap = ts.tv_sec; + next_leap += 86400 - (next_leap % 86400); + + if (settime) { + struct timeval tv; + + tv.tv_sec = next_leap - 10; + tv.tv_usec = 0; + settimeofday(&tv, NULL); + printf("Setting time to %s", ctime(&tv.tv_sec)); + } + + /* Reset NTP time state */ + clear_time_state(); + + /* Set the leap second insert flag */ + tx.modes = ADJ_STATUS; + if (insert) + tx.status = STA_INS; + else + tx.status = STA_DEL; + ret = adjtimex(&tx); + if (ret < 0) { + printf("Error: Problem setting STA_INS/STA_DEL!: %s\n", + time_state_str(ret)); + return ksft_exit_fail(); + } + + /* Validate STA_INS was set */ + tx.modes = 0; + ret = adjtimex(&tx); + if (tx.status != STA_INS && tx.status != STA_DEL) { + printf("Error: STA_INS/STA_DEL not set!: %s\n", + time_state_str(ret)); + return ksft_exit_fail(); + } + + if (tai_time) { + printf("Using TAI time," + " no inconsistencies should be seen!\n"); + } + + printf("Scheduling leap second for %s", ctime(&next_leap)); + + /* Wake up 3 seconds before leap */ + ts.tv_sec = next_leap - 3; + ts.tv_nsec = 0; + + while (clock_nanosleep(CLOCK_REALTIME, TIMER_ABSTIME, &ts, NULL)) + printf("Something woke us up, returning to sleep\n"); + + /* Validate STA_INS is still set */ + tx.modes = 0; + ret = adjtimex(&tx); + if (tx.status != STA_INS && tx.status != STA_DEL) { + printf("Something cleared STA_INS/STA_DEL, setting it again.\n"); + tx.modes = ADJ_STATUS; + if (insert) + tx.status = STA_INS; + else + tx.status = STA_DEL; + ret = adjtimex(&tx); + } + + /* Check adjtimex output every half second */ + now = tx.time.tv_sec; + while (now < next_leap + 2) { + char buf[26]; + struct timespec tai; + + tx.modes = 0; + ret = adjtimex(&tx); + + if (tai_time) { + clock_gettime(CLOCK_TAI, &tai); + printf("%ld sec, %9ld ns\t%s\n", + tai.tv_sec, + tai.tv_nsec, + time_state_str(ret)); + } else { + ctime_r(&tx.time.tv_sec, buf); + buf[strlen(buf)-1] = 0; /*remove trailing\n */ + + printf("%s + %6ld us (%i)\t%s\n", + buf, + tx.time.tv_usec, + tx.tai, + time_state_str(ret)); + } + now = tx.time.tv_sec; + /* Sleep for another half second */ + ts.tv_sec = 0; + ts.tv_nsec = NSEC_PER_SEC / 2; + clock_nanosleep(CLOCK_MONOTONIC, 0, &ts, NULL); + } + /* Switch to using other mode */ + insert = !insert; + + /* Note if kernel has known hrtimer failure */ + test_hrtimer_failure(); + + printf("Leap complete\n\n"); + + if ((iterations != -1) && !(--iterations)) + break; + } + + clear_time_state(); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/leapcrash.c b/tools/testing/selftests/timers/leapcrash.c new file mode 100644 index 000000000000..a1071bdbdeb7 --- /dev/null +++ b/tools/testing/selftests/timers/leapcrash.c @@ -0,0 +1,120 @@ +/* Demo leapsecond deadlock + * by: John Stultz (john.stultz@linaro.org) + * (C) Copyright IBM 2012 + * (C) Copyright 2013, 2015 Linaro Limited + * Licensed under the GPL + * + * This test demonstrates leapsecond deadlock that is possibe + * on kernels from 2.6.26 to 3.3. + * + * WARNING: THIS WILL LIKELY HARDHANG SYSTEMS AND MAY LOSE DATA + * RUN AT YOUR OWN RISK! + * To build: + * $ gcc leapcrash.c -o leapcrash -lrt + */ + + + +#include <stdio.h> +#include <stdlib.h> +#include <time.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <string.h> +#include <signal.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + + + +/* clear NTP time_status & time_state */ +int clear_time_state(void) +{ + struct timex tx; + int ret; + + /* + * We have to call adjtime twice here, as kernels + * prior to 6b1859dba01c7 (included in 3.5 and + * -stable), had an issue with the state machine + * and wouldn't clear the STA_INS/DEL flag directly. + */ + tx.modes = ADJ_STATUS; + tx.status = STA_PLL; + ret = adjtimex(&tx); + + tx.modes = ADJ_STATUS; + tx.status = 0; + ret = adjtimex(&tx); + + return ret; +} + +/* Make sure we cleanup on ctrl-c */ +void handler(int unused) +{ + clear_time_state(); + exit(0); +} + + +int main(void) +{ + struct timex tx; + struct timespec ts; + time_t next_leap; + int count = 0; + + setbuf(stdout, NULL); + + signal(SIGINT, handler); + signal(SIGKILL, handler); + printf("This runs for a few minutes. Press ctrl-c to stop\n"); + + clear_time_state(); + + + /* Get the current time */ + clock_gettime(CLOCK_REALTIME, &ts); + + /* Calculate the next possible leap second 23:59:60 GMT */ + next_leap = ts.tv_sec; + next_leap += 86400 - (next_leap % 86400); + + for (count = 0; count < 20; count++) { + struct timeval tv; + + + /* set the time to 2 seconds before the leap */ + tv.tv_sec = next_leap - 2; + tv.tv_usec = 0; + if (settimeofday(&tv, NULL)) { + printf("Error: You're likely not running with proper (ie: root) permissions\n"); + return ksft_exit_fail(); + } + tx.modes = 0; + adjtimex(&tx); + + /* hammer on adjtime w/ STA_INS */ + while (tx.time.tv_sec < next_leap + 1) { + /* Set the leap second insert flag */ + tx.modes = ADJ_STATUS; + tx.status = STA_INS; + adjtimex(&tx); + } + clear_time_state(); + printf("."); + } + printf("[OK]\n"); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/mqueue-lat.c b/tools/testing/selftests/timers/mqueue-lat.c new file mode 100644 index 000000000000..a2a3924d0b41 --- /dev/null +++ b/tools/testing/selftests/timers/mqueue-lat.c @@ -0,0 +1,124 @@ +/* Measure mqueue timeout latency + * by: john stultz (john.stultz@linaro.org) + * (C) Copyright Linaro 2013 + * + * Inspired with permission from example test by: + * Romain Francoise <romain@orebokech.com> + * Licensed under the GPLv2 + * + * To build: + * $ gcc mqueue-lat.c -o mqueue-lat -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <time.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <string.h> +#include <signal.h> +#include <errno.h> +#include <mqueue.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define NSEC_PER_SEC 1000000000ULL + +#define TARGET_TIMEOUT 100000000 /* 100ms in nanoseconds */ +#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */ + + +long long timespec_sub(struct timespec a, struct timespec b) +{ + long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec; + + ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec; + return ret; +} + +struct timespec timespec_add(struct timespec ts, unsigned long long ns) +{ + ts.tv_nsec += ns; + while (ts.tv_nsec >= NSEC_PER_SEC) { + ts.tv_nsec -= NSEC_PER_SEC; + ts.tv_sec++; + } + return ts; +} + +int mqueue_lat_test(void) +{ + + mqd_t q; + struct mq_attr attr; + struct timespec start, end, now, target; + int i, count, ret; + + q = mq_open("/foo", O_CREAT | O_RDONLY, 0666, NULL); + if (q < 0) { + perror("mq_open"); + return -1; + } + mq_getattr(q, &attr); + + + count = 100; + clock_gettime(CLOCK_MONOTONIC, &start); + + for (i = 0; i < count; i++) { + char buf[attr.mq_msgsize]; + + clock_gettime(CLOCK_REALTIME, &now); + target = now; + target = timespec_add(now, TARGET_TIMEOUT); /* 100ms */ + + ret = mq_timedreceive(q, buf, sizeof(buf), NULL, &target); + if (ret < 0 && errno != ETIMEDOUT) { + perror("mq_timedreceive"); + return -1; + } + } + clock_gettime(CLOCK_MONOTONIC, &end); + + mq_close(q); + + if ((timespec_sub(start, end)/count) > TARGET_TIMEOUT + UNRESONABLE_LATENCY) + return -1; + + return 0; +} + +int main(int argc, char **argv) +{ + int ret; + + printf("Mqueue latency : "); + + ret = mqueue_lat_test(); + if (ret < 0) { + printf("[FAILED]\n"); + return ksft_exit_fail(); + } + printf("[OK]\n"); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/nanosleep.c b/tools/testing/selftests/timers/nanosleep.c new file mode 100644 index 000000000000..8a3c29de7d49 --- /dev/null +++ b/tools/testing/selftests/timers/nanosleep.c @@ -0,0 +1,174 @@ +/* Make sure timers don't return early + * by: john stultz (johnstul@us.ibm.com) + * John Stultz (john.stultz@linaro.org) + * (C) Copyright IBM 2012 + * (C) Copyright Linaro 2013 2015 + * Licensed under the GPLv2 + * + * To build: + * $ gcc nanosleep.c -o nanosleep -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <time.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <string.h> +#include <signal.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define NSEC_PER_SEC 1000000000ULL + +#define CLOCK_REALTIME 0 +#define CLOCK_MONOTONIC 1 +#define CLOCK_PROCESS_CPUTIME_ID 2 +#define CLOCK_THREAD_CPUTIME_ID 3 +#define CLOCK_MONOTONIC_RAW 4 +#define CLOCK_REALTIME_COARSE 5 +#define CLOCK_MONOTONIC_COARSE 6 +#define CLOCK_BOOTTIME 7 +#define CLOCK_REALTIME_ALARM 8 +#define CLOCK_BOOTTIME_ALARM 9 +#define CLOCK_HWSPECIFIC 10 +#define CLOCK_TAI 11 +#define NR_CLOCKIDS 12 + +#define UNSUPPORTED 0xf00f + +char *clockstring(int clockid) +{ + switch (clockid) { + case CLOCK_REALTIME: + return "CLOCK_REALTIME"; + case CLOCK_MONOTONIC: + return "CLOCK_MONOTONIC"; + case CLOCK_PROCESS_CPUTIME_ID: + return "CLOCK_PROCESS_CPUTIME_ID"; + case CLOCK_THREAD_CPUTIME_ID: + return "CLOCK_THREAD_CPUTIME_ID"; + case CLOCK_MONOTONIC_RAW: + return "CLOCK_MONOTONIC_RAW"; + case CLOCK_REALTIME_COARSE: + return "CLOCK_REALTIME_COARSE"; + case CLOCK_MONOTONIC_COARSE: + return "CLOCK_MONOTONIC_COARSE"; + case CLOCK_BOOTTIME: + return "CLOCK_BOOTTIME"; + case CLOCK_REALTIME_ALARM: + return "CLOCK_REALTIME_ALARM"; + case CLOCK_BOOTTIME_ALARM: + return "CLOCK_BOOTTIME_ALARM"; + case CLOCK_TAI: + return "CLOCK_TAI"; + }; + return "UNKNOWN_CLOCKID"; +} + +/* returns 1 if a <= b, 0 otherwise */ +static inline int in_order(struct timespec a, struct timespec b) +{ + if (a.tv_sec < b.tv_sec) + return 1; + if (a.tv_sec > b.tv_sec) + return 0; + if (a.tv_nsec > b.tv_nsec) + return 0; + return 1; +} + +struct timespec timespec_add(struct timespec ts, unsigned long long ns) +{ + ts.tv_nsec += ns; + while (ts.tv_nsec >= NSEC_PER_SEC) { + ts.tv_nsec -= NSEC_PER_SEC; + ts.tv_sec++; + } + return ts; +} + +int nanosleep_test(int clockid, long long ns) +{ + struct timespec now, target, rel; + + /* First check abs time */ + if (clock_gettime(clockid, &now)) + return UNSUPPORTED; + target = timespec_add(now, ns); + + if (clock_nanosleep(clockid, TIMER_ABSTIME, &target, NULL)) + return UNSUPPORTED; + clock_gettime(clockid, &now); + + if (!in_order(target, now)) + return -1; + + /* Second check reltime */ + clock_gettime(clockid, &now); + rel.tv_sec = 0; + rel.tv_nsec = 0; + rel = timespec_add(rel, ns); + target = timespec_add(now, ns); + clock_nanosleep(clockid, 0, &rel, NULL); + clock_gettime(clockid, &now); + + if (!in_order(target, now)) + return -1; + return 0; +} + +int main(int argc, char **argv) +{ + long long length; + int clockid, ret; + + for (clockid = CLOCK_REALTIME; clockid < NR_CLOCKIDS; clockid++) { + + /* Skip cputime clockids since nanosleep won't increment cputime */ + if (clockid == CLOCK_PROCESS_CPUTIME_ID || + clockid == CLOCK_THREAD_CPUTIME_ID || + clockid == CLOCK_HWSPECIFIC) + continue; + + printf("Nanosleep %-31s ", clockstring(clockid)); + + length = 10; + while (length <= (NSEC_PER_SEC * 10)) { + ret = nanosleep_test(clockid, length); + if (ret == UNSUPPORTED) { + printf("[UNSUPPORTED]\n"); + goto next; + } + if (ret < 0) { + printf("[FAILED]\n"); + return ksft_exit_fail(); + } + length *= 100; + } + printf("[OK]\n"); +next: + ret = 0; + } + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/nsleep-lat.c b/tools/testing/selftests/timers/nsleep-lat.c new file mode 100644 index 000000000000..2d7898fda0f1 --- /dev/null +++ b/tools/testing/selftests/timers/nsleep-lat.c @@ -0,0 +1,190 @@ +/* Measure nanosleep timer latency + * by: john stultz (john.stultz@linaro.org) + * (C) Copyright Linaro 2013 + * Licensed under the GPLv2 + * + * To build: + * $ gcc nsleep-lat.c -o nsleep-lat -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <time.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <string.h> +#include <signal.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define NSEC_PER_SEC 1000000000ULL + +#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */ + + +#define CLOCK_REALTIME 0 +#define CLOCK_MONOTONIC 1 +#define CLOCK_PROCESS_CPUTIME_ID 2 +#define CLOCK_THREAD_CPUTIME_ID 3 +#define CLOCK_MONOTONIC_RAW 4 +#define CLOCK_REALTIME_COARSE 5 +#define CLOCK_MONOTONIC_COARSE 6 +#define CLOCK_BOOTTIME 7 +#define CLOCK_REALTIME_ALARM 8 +#define CLOCK_BOOTTIME_ALARM 9 +#define CLOCK_HWSPECIFIC 10 +#define CLOCK_TAI 11 +#define NR_CLOCKIDS 12 + +#define UNSUPPORTED 0xf00f + +char *clockstring(int clockid) +{ + switch (clockid) { + case CLOCK_REALTIME: + return "CLOCK_REALTIME"; + case CLOCK_MONOTONIC: + return "CLOCK_MONOTONIC"; + case CLOCK_PROCESS_CPUTIME_ID: + return "CLOCK_PROCESS_CPUTIME_ID"; + case CLOCK_THREAD_CPUTIME_ID: + return "CLOCK_THREAD_CPUTIME_ID"; + case CLOCK_MONOTONIC_RAW: + return "CLOCK_MONOTONIC_RAW"; + case CLOCK_REALTIME_COARSE: + return "CLOCK_REALTIME_COARSE"; + case CLOCK_MONOTONIC_COARSE: + return "CLOCK_MONOTONIC_COARSE"; + case CLOCK_BOOTTIME: + return "CLOCK_BOOTTIME"; + case CLOCK_REALTIME_ALARM: + return "CLOCK_REALTIME_ALARM"; + case CLOCK_BOOTTIME_ALARM: + return "CLOCK_BOOTTIME_ALARM"; + case CLOCK_TAI: + return "CLOCK_TAI"; + }; + return "UNKNOWN_CLOCKID"; +} + +struct timespec timespec_add(struct timespec ts, unsigned long long ns) +{ + ts.tv_nsec += ns; + while (ts.tv_nsec >= NSEC_PER_SEC) { + ts.tv_nsec -= NSEC_PER_SEC; + ts.tv_sec++; + } + return ts; +} + + +long long timespec_sub(struct timespec a, struct timespec b) +{ + long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec; + + ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec; + return ret; +} + +int nanosleep_lat_test(int clockid, long long ns) +{ + struct timespec start, end, target; + long long latency = 0; + int i, count; + + target.tv_sec = ns/NSEC_PER_SEC; + target.tv_nsec = ns%NSEC_PER_SEC; + + if (clock_gettime(clockid, &start)) + return UNSUPPORTED; + if (clock_nanosleep(clockid, 0, &target, NULL)) + return UNSUPPORTED; + + count = 10; + + /* First check relative latency */ + clock_gettime(clockid, &start); + for (i = 0; i < count; i++) + clock_nanosleep(clockid, 0, &target, NULL); + clock_gettime(clockid, &end); + + if (((timespec_sub(start, end)/count)-ns) > UNRESONABLE_LATENCY) { + printf("Large rel latency: %lld ns :", (timespec_sub(start, end)/count)-ns); + return -1; + } + + /* Next check absolute latency */ + for (i = 0; i < count; i++) { + clock_gettime(clockid, &start); + target = timespec_add(start, ns); + clock_nanosleep(clockid, TIMER_ABSTIME, &target, NULL); + clock_gettime(clockid, &end); + latency += timespec_sub(target, end); + } + + if (latency/count > UNRESONABLE_LATENCY) { + printf("Large abs latency: %lld ns :", latency/count); + return -1; + } + + return 0; +} + + + +int main(int argc, char **argv) +{ + long long length; + int clockid, ret; + + for (clockid = CLOCK_REALTIME; clockid < NR_CLOCKIDS; clockid++) { + + /* Skip cputime clockids since nanosleep won't increment cputime */ + if (clockid == CLOCK_PROCESS_CPUTIME_ID || + clockid == CLOCK_THREAD_CPUTIME_ID || + clockid == CLOCK_HWSPECIFIC) + continue; + + printf("nsleep latency %-26s ", clockstring(clockid)); + + length = 10; + while (length <= (NSEC_PER_SEC * 10)) { + ret = nanosleep_lat_test(clockid, length); + if (ret) + break; + length *= 100; + + } + + if (ret == UNSUPPORTED) { + printf("[UNSUPPORTED]\n"); + continue; + } + if (ret < 0) { + printf("[FAILED]\n"); + return ksft_exit_fail(); + } + printf("[OK]\n"); + } + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/posix_timers.c b/tools/testing/selftests/timers/posix_timers.c index f87d970a485c..5a246a02dff3 100644 --- a/tools/testing/selftests/timers/posix_timers.c +++ b/tools/testing/selftests/timers/posix_timers.c @@ -35,10 +35,11 @@ static void user_loop(void) static void kernel_loop(void) { void *addr = sbrk(0); + int err = 0; - while (!done) { - brk(addr + 4096); - brk(addr); + while (!done && !err) { + err = brk(addr + 4096); + err |= brk(addr); } } @@ -190,8 +191,6 @@ static int check_timer_create(int which) int main(int argc, char **argv) { - int err; - printf("Testing posix timers. False negative may happen on CPU execution \n"); printf("based timers if other threads run on the CPU...\n"); diff --git a/tools/testing/selftests/timers/raw_skew.c b/tools/testing/selftests/timers/raw_skew.c new file mode 100644 index 000000000000..30906bfd9c1b --- /dev/null +++ b/tools/testing/selftests/timers/raw_skew.c @@ -0,0 +1,154 @@ +/* CLOCK_MONOTONIC vs CLOCK_MONOTONIC_RAW skew test + * by: john stultz (johnstul@us.ibm.com) + * John Stultz <john.stultz@linaro.org> + * (C) Copyright IBM 2012 + * (C) Copyright Linaro Limited 2015 + * Licensed under the GPLv2 + * + * To build: + * $ gcc raw_skew.c -o raw_skew -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <time.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + + +#define CLOCK_MONOTONIC_RAW 4 +#define NSEC_PER_SEC 1000000000LL + +#define shift_right(x, s) ({ \ + __typeof__(x) __x = (x); \ + __typeof__(s) __s = (s); \ + __x < 0 ? -(-__x >> __s) : __x >> __s; \ +}) + +long long llabs(long long val) +{ + if (val < 0) + val = -val; + return val; +} + +unsigned long long ts_to_nsec(struct timespec ts) +{ + return ts.tv_sec * NSEC_PER_SEC + ts.tv_nsec; +} + +struct timespec nsec_to_ts(long long ns) +{ + struct timespec ts; + + ts.tv_sec = ns/NSEC_PER_SEC; + ts.tv_nsec = ns%NSEC_PER_SEC; + return ts; +} + +long long diff_timespec(struct timespec start, struct timespec end) +{ + long long start_ns, end_ns; + + start_ns = ts_to_nsec(start); + end_ns = ts_to_nsec(end); + return end_ns - start_ns; +} + +void get_monotonic_and_raw(struct timespec *mon, struct timespec *raw) +{ + struct timespec start, mid, end; + long long diff = 0, tmp; + int i; + + for (i = 0; i < 3; i++) { + long long newdiff; + + clock_gettime(CLOCK_MONOTONIC, &start); + clock_gettime(CLOCK_MONOTONIC_RAW, &mid); + clock_gettime(CLOCK_MONOTONIC, &end); + + newdiff = diff_timespec(start, end); + if (diff == 0 || newdiff < diff) { + diff = newdiff; + *raw = mid; + tmp = (ts_to_nsec(start) + ts_to_nsec(end))/2; + *mon = nsec_to_ts(tmp); + } + } +} + +int main(int argv, char **argc) +{ + struct timespec mon, raw, start, end; + long long delta1, delta2, interval, eppm, ppm; + struct timex tx1, tx2; + + setbuf(stdout, NULL); + + if (clock_gettime(CLOCK_MONOTONIC_RAW, &raw)) { + printf("ERR: NO CLOCK_MONOTONIC_RAW\n"); + return -1; + } + + tx1.modes = 0; + adjtimex(&tx1); + get_monotonic_and_raw(&mon, &raw); + start = mon; + delta1 = diff_timespec(mon, raw); + + if (tx1.offset) + printf("WARNING: ADJ_OFFSET in progress, this will cause inaccurate results\n"); + + printf("Estimating clock drift: "); + sleep(120); + + get_monotonic_and_raw(&mon, &raw); + end = mon; + tx2.modes = 0; + adjtimex(&tx2); + delta2 = diff_timespec(mon, raw); + + interval = diff_timespec(start, end); + + /* calculate measured ppm between MONOTONIC and MONOTONIC_RAW */ + eppm = ((delta2-delta1)*NSEC_PER_SEC)/interval; + eppm = -eppm; + printf("%lld.%i(est)", eppm/1000, abs((int)(eppm%1000))); + + /* Avg the two actual freq samples adjtimex gave us */ + ppm = (tx1.freq + tx2.freq) * 1000 / 2; + ppm = (long long)tx1.freq * 1000; + ppm = shift_right(ppm, 16); + printf(" %lld.%i(act)", ppm/1000, abs((int)(ppm%1000))); + + if (llabs(eppm - ppm) > 1000) { + printf(" [FAILED]\n"); + return ksft_exit_fail(); + } + printf(" [OK]\n"); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/rtctest.c b/tools/testing/selftests/timers/rtctest.c new file mode 100644 index 000000000000..d80ae852334d --- /dev/null +++ b/tools/testing/selftests/timers/rtctest.c @@ -0,0 +1,271 @@ +/* + * Real Time Clock Driver Test/Example Program + * + * Compile with: + * gcc -s -Wall -Wstrict-prototypes rtctest.c -o rtctest + * + * Copyright (C) 1996, Paul Gortmaker. + * + * Released under the GNU General Public License, version 2, + * included herein by reference. + * + */ + +#include <stdio.h> +#include <linux/rtc.h> +#include <sys/ioctl.h> +#include <sys/time.h> +#include <sys/types.h> +#include <fcntl.h> +#include <unistd.h> +#include <stdlib.h> +#include <errno.h> + + +/* + * This expects the new RTC class driver framework, working with + * clocks that will often not be clones of what the PC-AT had. + * Use the command line to specify another RTC if you need one. + */ +static const char default_rtc[] = "/dev/rtc0"; + + +int main(int argc, char **argv) +{ + int i, fd, retval, irqcount = 0; + unsigned long tmp, data; + struct rtc_time rtc_tm; + const char *rtc = default_rtc; + struct timeval start, end, diff; + + switch (argc) { + case 2: + rtc = argv[1]; + /* FALLTHROUGH */ + case 1: + break; + default: + fprintf(stderr, "usage: rtctest [rtcdev]\n"); + return 1; + } + + fd = open(rtc, O_RDONLY); + + if (fd == -1) { + perror(rtc); + exit(errno); + } + + fprintf(stderr, "\n\t\t\tRTC Driver Test Example.\n\n"); + + /* Turn on update interrupts (one per second) */ + retval = ioctl(fd, RTC_UIE_ON, 0); + if (retval == -1) { + if (errno == ENOTTY) { + fprintf(stderr, + "\n...Update IRQs not supported.\n"); + goto test_READ; + } + perror("RTC_UIE_ON ioctl"); + exit(errno); + } + + fprintf(stderr, "Counting 5 update (1/sec) interrupts from reading %s:", + rtc); + fflush(stderr); + for (i=1; i<6; i++) { + /* This read will block */ + retval = read(fd, &data, sizeof(unsigned long)); + if (retval == -1) { + perror("read"); + exit(errno); + } + fprintf(stderr, " %d",i); + fflush(stderr); + irqcount++; + } + + fprintf(stderr, "\nAgain, from using select(2) on /dev/rtc:"); + fflush(stderr); + for (i=1; i<6; i++) { + struct timeval tv = {5, 0}; /* 5 second timeout on select */ + fd_set readfds; + + FD_ZERO(&readfds); + FD_SET(fd, &readfds); + /* The select will wait until an RTC interrupt happens. */ + retval = select(fd+1, &readfds, NULL, NULL, &tv); + if (retval == -1) { + perror("select"); + exit(errno); + } + /* This read won't block unlike the select-less case above. */ + retval = read(fd, &data, sizeof(unsigned long)); + if (retval == -1) { + perror("read"); + exit(errno); + } + fprintf(stderr, " %d",i); + fflush(stderr); + irqcount++; + } + + /* Turn off update interrupts */ + retval = ioctl(fd, RTC_UIE_OFF, 0); + if (retval == -1) { + perror("RTC_UIE_OFF ioctl"); + exit(errno); + } + +test_READ: + /* Read the RTC time/date */ + retval = ioctl(fd, RTC_RD_TIME, &rtc_tm); + if (retval == -1) { + perror("RTC_RD_TIME ioctl"); + exit(errno); + } + + fprintf(stderr, "\n\nCurrent RTC date/time is %d-%d-%d, %02d:%02d:%02d.\n", + rtc_tm.tm_mday, rtc_tm.tm_mon + 1, rtc_tm.tm_year + 1900, + rtc_tm.tm_hour, rtc_tm.tm_min, rtc_tm.tm_sec); + + /* Set the alarm to 5 sec in the future, and check for rollover */ + rtc_tm.tm_sec += 5; + if (rtc_tm.tm_sec >= 60) { + rtc_tm.tm_sec %= 60; + rtc_tm.tm_min++; + } + if (rtc_tm.tm_min == 60) { + rtc_tm.tm_min = 0; + rtc_tm.tm_hour++; + } + if (rtc_tm.tm_hour == 24) + rtc_tm.tm_hour = 0; + + retval = ioctl(fd, RTC_ALM_SET, &rtc_tm); + if (retval == -1) { + if (errno == ENOTTY) { + fprintf(stderr, + "\n...Alarm IRQs not supported.\n"); + goto test_PIE; + } + perror("RTC_ALM_SET ioctl"); + exit(errno); + } + + /* Read the current alarm settings */ + retval = ioctl(fd, RTC_ALM_READ, &rtc_tm); + if (retval == -1) { + perror("RTC_ALM_READ ioctl"); + exit(errno); + } + + fprintf(stderr, "Alarm time now set to %02d:%02d:%02d.\n", + rtc_tm.tm_hour, rtc_tm.tm_min, rtc_tm.tm_sec); + + /* Enable alarm interrupts */ + retval = ioctl(fd, RTC_AIE_ON, 0); + if (retval == -1) { + perror("RTC_AIE_ON ioctl"); + exit(errno); + } + + fprintf(stderr, "Waiting 5 seconds for alarm..."); + fflush(stderr); + /* This blocks until the alarm ring causes an interrupt */ + retval = read(fd, &data, sizeof(unsigned long)); + if (retval == -1) { + perror("read"); + exit(errno); + } + irqcount++; + fprintf(stderr, " okay. Alarm rang.\n"); + + /* Disable alarm interrupts */ + retval = ioctl(fd, RTC_AIE_OFF, 0); + if (retval == -1) { + perror("RTC_AIE_OFF ioctl"); + exit(errno); + } + +test_PIE: + /* Read periodic IRQ rate */ + retval = ioctl(fd, RTC_IRQP_READ, &tmp); + if (retval == -1) { + /* not all RTCs support periodic IRQs */ + if (errno == ENOTTY) { + fprintf(stderr, "\nNo periodic IRQ support\n"); + goto done; + } + perror("RTC_IRQP_READ ioctl"); + exit(errno); + } + fprintf(stderr, "\nPeriodic IRQ rate is %ldHz.\n", tmp); + + fprintf(stderr, "Counting 20 interrupts at:"); + fflush(stderr); + + /* The frequencies 128Hz, 256Hz, ... 8192Hz are only allowed for root. */ + for (tmp=2; tmp<=64; tmp*=2) { + + retval = ioctl(fd, RTC_IRQP_SET, tmp); + if (retval == -1) { + /* not all RTCs can change their periodic IRQ rate */ + if (errno == ENOTTY) { + fprintf(stderr, + "\n...Periodic IRQ rate is fixed\n"); + goto done; + } + perror("RTC_IRQP_SET ioctl"); + exit(errno); + } + + fprintf(stderr, "\n%ldHz:\t", tmp); + fflush(stderr); + + /* Enable periodic interrupts */ + retval = ioctl(fd, RTC_PIE_ON, 0); + if (retval == -1) { + perror("RTC_PIE_ON ioctl"); + exit(errno); + } + + for (i=1; i<21; i++) { + gettimeofday(&start, NULL); + /* This blocks */ + retval = read(fd, &data, sizeof(unsigned long)); + if (retval == -1) { + perror("read"); + exit(errno); + } + gettimeofday(&end, NULL); + timersub(&end, &start, &diff); + if (diff.tv_sec > 0 || + diff.tv_usec > ((1000000L / tmp) * 1.10)) { + fprintf(stderr, "\nPIE delta error: %ld.%06ld should be close to 0.%06ld\n", + diff.tv_sec, diff.tv_usec, + (1000000L / tmp)); + fflush(stdout); + exit(-1); + } + + fprintf(stderr, " %d",i); + fflush(stderr); + irqcount++; + } + + /* Disable periodic interrupts */ + retval = ioctl(fd, RTC_PIE_OFF, 0); + if (retval == -1) { + perror("RTC_PIE_OFF ioctl"); + exit(errno); + } + } + +done: + fprintf(stderr, "\n\n\t\t\t *** Test complete ***\n"); + + close(fd); + + return 0; +} diff --git a/tools/testing/selftests/timers/set-2038.c b/tools/testing/selftests/timers/set-2038.c new file mode 100644 index 000000000000..c8a7e14446b1 --- /dev/null +++ b/tools/testing/selftests/timers/set-2038.c @@ -0,0 +1,144 @@ +/* Time bounds setting test + * by: john stultz (johnstul@us.ibm.com) + * (C) Copyright IBM 2012 + * Licensed under the GPLv2 + * + * NOTE: This is a meta-test which sets the time to edge cases then + * uses other tests to detect problems. Thus this test requires that + * the inconsistency-check and nanosleep tests be present in the same + * directory it is run from. + * + * To build: + * $ gcc set-2038.c -o set-2038 -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <time.h> +#include <sys/time.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define NSEC_PER_SEC 1000000000LL + +#define KTIME_MAX ((long long)~((unsigned long long)1 << 63)) +#define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) + +#define YEAR_1901 (-0x7fffffffL) +#define YEAR_1970 1 +#define YEAR_2038 0x7fffffffL /*overflows 32bit time_t */ +#define YEAR_2262 KTIME_SEC_MAX /*overflows 64bit ktime_t */ +#define YEAR_MAX ((long long)((1ULL<<63)-1)) /*overflows 64bit time_t */ + +int is32bits(void) +{ + return (sizeof(long) == 4); +} + +int settime(long long time) +{ + struct timeval now; + int ret; + + now.tv_sec = (time_t)time; + now.tv_usec = 0; + + ret = settimeofday(&now, NULL); + + printf("Setting time to 0x%lx: %d\n", (long)time, ret); + return ret; +} + +int do_tests(void) +{ + int ret; + + ret = system("date"); + ret = system("./inconsistency-check -c 0 -t 20"); + ret |= system("./nanosleep"); + ret |= system("./nsleep-lat"); + return ret; + +} + +int main(int argc, char *argv[]) +{ + int ret = 0; + int opt, dangerous = 0; + time_t start; + + /* Process arguments */ + while ((opt = getopt(argc, argv, "d")) != -1) { + switch (opt) { + case 'd': + dangerous = 1; + } + } + + start = time(0); + + /* First test that crazy values don't work */ + if (!settime(YEAR_1901)) { + ret = -1; + goto out; + } + if (!settime(YEAR_MAX)) { + ret = -1; + goto out; + } + if (!is32bits() && !settime(YEAR_2262)) { + ret = -1; + goto out; + } + + /* Now test behavior near edges */ + settime(YEAR_1970); + ret = do_tests(); + if (ret) + goto out; + + settime(YEAR_2038 - 600); + ret = do_tests(); + if (ret) + goto out; + + /* The rest of the tests can blowup on 32bit systems */ + if (is32bits() && !dangerous) + goto out; + /* Test rollover behavior 32bit edge */ + settime(YEAR_2038 - 10); + ret = do_tests(); + if (ret) + goto out; + + settime(YEAR_2262 - 600); + ret = do_tests(); + +out: + /* restore clock */ + settime(start); + if (ret) + return ksft_exit_fail(); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/set-tai.c b/tools/testing/selftests/timers/set-tai.c new file mode 100644 index 000000000000..dc88dbc8831f --- /dev/null +++ b/tools/testing/selftests/timers/set-tai.c @@ -0,0 +1,79 @@ +/* Set tai offset + * by: John Stultz <john.stultz@linaro.org> + * (C) Copyright Linaro 2013 + * Licensed under the GPLv2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <stdio.h> +#include <stdlib.h> +#include <time.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <string.h> +#include <signal.h> +#include <unistd.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +int set_tai(int offset) +{ + struct timex tx; + + memset(&tx, 0, sizeof(tx)); + + tx.modes = ADJ_TAI; + tx.constant = offset; + + return adjtimex(&tx); +} + +int get_tai(void) +{ + struct timex tx; + + memset(&tx, 0, sizeof(tx)); + + adjtimex(&tx); + return tx.tai; +} + +int main(int argc, char **argv) +{ + int i, ret; + + ret = get_tai(); + printf("tai offset started at %i\n", ret); + + printf("Checking tai offsets can be properly set: "); + for (i = 1; i <= 60; i++) { + ret = set_tai(i); + ret = get_tai(); + if (ret != i) { + printf("[FAILED] expected: %i got %i\n", i, ret); + return ksft_exit_fail(); + } + } + printf("[OK]\n"); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/set-timer-lat.c b/tools/testing/selftests/timers/set-timer-lat.c new file mode 100644 index 000000000000..4fc98c5b0899 --- /dev/null +++ b/tools/testing/selftests/timers/set-timer-lat.c @@ -0,0 +1,216 @@ +/* set_timer latency test + * John Stultz (john.stultz@linaro.org) + * (C) Copyright Linaro 2014 + * Licensed under the GPLv2 + * + * This test makes sure the set_timer api is correct + * + * To build: + * $ gcc set-timer-lat.c -o set-timer-lat -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <stdio.h> +#include <unistd.h> +#include <time.h> +#include <string.h> +#include <signal.h> +#include <stdlib.h> +#include <pthread.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define CLOCK_REALTIME 0 +#define CLOCK_MONOTONIC 1 +#define CLOCK_PROCESS_CPUTIME_ID 2 +#define CLOCK_THREAD_CPUTIME_ID 3 +#define CLOCK_MONOTONIC_RAW 4 +#define CLOCK_REALTIME_COARSE 5 +#define CLOCK_MONOTONIC_COARSE 6 +#define CLOCK_BOOTTIME 7 +#define CLOCK_REALTIME_ALARM 8 +#define CLOCK_BOOTTIME_ALARM 9 +#define CLOCK_HWSPECIFIC 10 +#define CLOCK_TAI 11 +#define NR_CLOCKIDS 12 + + +#define NSEC_PER_SEC 1000000000ULL +#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */ + +#define TIMER_SECS 1 +int alarmcount; +int clock_id; +struct timespec start_time; +long long max_latency_ns; + +char *clockstring(int clockid) +{ + switch (clockid) { + case CLOCK_REALTIME: + return "CLOCK_REALTIME"; + case CLOCK_MONOTONIC: + return "CLOCK_MONOTONIC"; + case CLOCK_PROCESS_CPUTIME_ID: + return "CLOCK_PROCESS_CPUTIME_ID"; + case CLOCK_THREAD_CPUTIME_ID: + return "CLOCK_THREAD_CPUTIME_ID"; + case CLOCK_MONOTONIC_RAW: + return "CLOCK_MONOTONIC_RAW"; + case CLOCK_REALTIME_COARSE: + return "CLOCK_REALTIME_COARSE"; + case CLOCK_MONOTONIC_COARSE: + return "CLOCK_MONOTONIC_COARSE"; + case CLOCK_BOOTTIME: + return "CLOCK_BOOTTIME"; + case CLOCK_REALTIME_ALARM: + return "CLOCK_REALTIME_ALARM"; + case CLOCK_BOOTTIME_ALARM: + return "CLOCK_BOOTTIME_ALARM"; + case CLOCK_TAI: + return "CLOCK_TAI"; + }; + return "UNKNOWN_CLOCKID"; +} + + +long long timespec_sub(struct timespec a, struct timespec b) +{ + long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec; + + ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec; + return ret; +} + + +void sigalarm(int signo) +{ + long long delta_ns; + struct timespec ts; + + clock_gettime(clock_id, &ts); + alarmcount++; + + delta_ns = timespec_sub(start_time, ts); + delta_ns -= NSEC_PER_SEC * TIMER_SECS * alarmcount; + + if (delta_ns < 0) + printf("%s timer fired early: FAIL\n", clockstring(clock_id)); + + if (delta_ns > max_latency_ns) + max_latency_ns = delta_ns; +} + +int do_timer(int clock_id, int flags) +{ + struct sigevent se; + timer_t tm1; + struct itimerspec its1, its2; + int err; + + /* Set up timer: */ + memset(&se, 0, sizeof(se)); + se.sigev_notify = SIGEV_SIGNAL; + se.sigev_signo = SIGRTMAX; + se.sigev_value.sival_int = 0; + + max_latency_ns = 0; + alarmcount = 0; + + err = timer_create(clock_id, &se, &tm1); + if (err) { + if ((clock_id == CLOCK_REALTIME_ALARM) || + (clock_id == CLOCK_BOOTTIME_ALARM)) { + printf("%-22s %s missing CAP_WAKE_ALARM? : [UNSUPPORTED]\n", + clockstring(clock_id), + flags ? "ABSTIME":"RELTIME"); + return 0; + } + printf("%s - timer_create() failed\n", clockstring(clock_id)); + return -1; + } + + clock_gettime(clock_id, &start_time); + if (flags) { + its1.it_value = start_time; + its1.it_value.tv_sec += TIMER_SECS; + } else { + its1.it_value.tv_sec = TIMER_SECS; + its1.it_value.tv_nsec = 0; + } + its1.it_interval.tv_sec = TIMER_SECS; + its1.it_interval.tv_nsec = 0; + + err = timer_settime(tm1, flags, &its1, &its2); + if (err) { + printf("%s - timer_settime() failed\n", clockstring(clock_id)); + return -1; + } + + while (alarmcount < 5) + sleep(1); + + printf("%-22s %s max latency: %10lld ns : ", + clockstring(clock_id), + flags ? "ABSTIME":"RELTIME", + max_latency_ns); + + timer_delete(tm1); + if (max_latency_ns < UNRESONABLE_LATENCY) { + printf("[OK]\n"); + return 0; + } + printf("[FAILED]\n"); + return -1; +} + +int main(void) +{ + struct sigaction act; + int signum = SIGRTMAX; + int ret = 0; + + /* Set up signal handler: */ + sigfillset(&act.sa_mask); + act.sa_flags = 0; + act.sa_handler = sigalarm; + sigaction(signum, &act, NULL); + + printf("Setting timers for every %i seconds\n", TIMER_SECS); + for (clock_id = 0; clock_id < NR_CLOCKIDS; clock_id++) { + + if ((clock_id == CLOCK_PROCESS_CPUTIME_ID) || + (clock_id == CLOCK_THREAD_CPUTIME_ID) || + (clock_id == CLOCK_MONOTONIC_RAW) || + (clock_id == CLOCK_REALTIME_COARSE) || + (clock_id == CLOCK_MONOTONIC_COARSE) || + (clock_id == CLOCK_HWSPECIFIC)) + continue; + + ret |= do_timer(clock_id, TIMER_ABSTIME); + ret |= do_timer(clock_id, 0); + } + if (ret) + return ksft_exit_fail(); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/skew_consistency.c b/tools/testing/selftests/timers/skew_consistency.c new file mode 100644 index 000000000000..5562f84ee07c --- /dev/null +++ b/tools/testing/selftests/timers/skew_consistency.c @@ -0,0 +1,89 @@ +/* ADJ_FREQ Skew consistency test + * by: john stultz (johnstul@us.ibm.com) + * (C) Copyright IBM 2012 + * Licensed under the GPLv2 + * + * NOTE: This is a meta-test which cranks the ADJ_FREQ knob back + * and forth and watches for consistency problems. Thus this test requires + * that the inconsistency-check tests be present in the same directory it + * is run from. + * + * To build: + * $ gcc skew_consistency.c -o skew_consistency -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <time.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <stdlib.h> +#include <string.h> +#include <sys/wait.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define NSEC_PER_SEC 1000000000LL + +int main(int argv, char **argc) +{ + struct timex tx; + int ret, ppm; + pid_t pid; + + + printf("Running Asyncrhonous Frequency Changing Tests...\n"); + + pid = fork(); + if (!pid) + return system("./inconsistency-check -c 1 -t 600"); + + ppm = 500; + ret = 0; + + while (pid != waitpid(pid, &ret, WNOHANG)) { + ppm = -ppm; + tx.modes = ADJ_FREQUENCY; + tx.freq = ppm << 16; + adjtimex(&tx); + usleep(500000); + } + + /* Set things back */ + tx.modes = ADJ_FREQUENCY; + tx.offset = 0; + adjtimex(&tx); + + + if (ret) { + printf("[FAILED]\n"); + return ksft_exit_fail(); + } + printf("[OK]\n"); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/threadtest.c b/tools/testing/selftests/timers/threadtest.c new file mode 100644 index 000000000000..e632e116f05e --- /dev/null +++ b/tools/testing/selftests/timers/threadtest.c @@ -0,0 +1,204 @@ +/* threadtest.c + * by: john stultz (johnstul@us.ibm.com) + * (C) Copyright IBM 2004, 2005, 2006, 2012 + * Licensed under the GPLv2 + * + * To build: + * $ gcc threadtest.c -o threadtest -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <sys/time.h> +#include <pthread.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + + +/* serializes shared list access */ +pthread_mutex_t list_lock = PTHREAD_MUTEX_INITIALIZER; +/* serializes console output */ +pthread_mutex_t print_lock = PTHREAD_MUTEX_INITIALIZER; + + +#define MAX_THREADS 128 +#define LISTSIZE 128 + +int done = 0; + +struct timespec global_list[LISTSIZE]; +int listcount = 0; + + +void checklist(struct timespec *list, int size) +{ + int i, j; + struct timespec *a, *b; + + /* scan the list */ + for (i = 0; i < size-1; i++) { + a = &list[i]; + b = &list[i+1]; + + /* look for any time inconsistencies */ + if ((b->tv_sec <= a->tv_sec) && + (b->tv_nsec < a->tv_nsec)) { + + /* flag other threads */ + done = 1; + + /*serialize printing to avoid junky output*/ + pthread_mutex_lock(&print_lock); + + /* dump the list */ + printf("\n"); + for (j = 0; j < size; j++) { + if (j == i) + printf("---------------\n"); + printf("%lu:%lu\n", list[j].tv_sec, list[j].tv_nsec); + if (j == i+1) + printf("---------------\n"); + } + printf("[FAILED]\n"); + + pthread_mutex_unlock(&print_lock); + } + } +} + +/* The shared thread shares a global list + * that each thread fills while holding the lock. + * This stresses clock syncronization across cpus. + */ +void *shared_thread(void *arg) +{ + while (!done) { + /* protect the list */ + pthread_mutex_lock(&list_lock); + + /* see if we're ready to check the list */ + if (listcount >= LISTSIZE) { + checklist(global_list, LISTSIZE); + listcount = 0; + } + clock_gettime(CLOCK_MONOTONIC, &global_list[listcount++]); + + pthread_mutex_unlock(&list_lock); + } + return NULL; +} + + +/* Each independent thread fills in its own + * list. This stresses clock_gettime() lock contention. + */ +void *independent_thread(void *arg) +{ + struct timespec my_list[LISTSIZE]; + int count; + + while (!done) { + /* fill the list */ + for (count = 0; count < LISTSIZE; count++) + clock_gettime(CLOCK_MONOTONIC, &my_list[count]); + checklist(my_list, LISTSIZE); + } + return NULL; +} + +#define DEFAULT_THREAD_COUNT 8 +#define DEFAULT_RUNTIME 30 + +int main(int argc, char **argv) +{ + int thread_count, i; + time_t start, now, runtime; + char buf[255]; + pthread_t pth[MAX_THREADS]; + int opt; + void *tret; + int ret = 0; + void *(*thread)(void *) = shared_thread; + + thread_count = DEFAULT_THREAD_COUNT; + runtime = DEFAULT_RUNTIME; + + /* Process arguments */ + while ((opt = getopt(argc, argv, "t:n:i")) != -1) { + switch (opt) { + case 't': + runtime = atoi(optarg); + break; + case 'n': + thread_count = atoi(optarg); + break; + case 'i': + thread = independent_thread; + printf("using independent threads\n"); + break; + default: + printf("Usage: %s [-t <secs>] [-n <numthreads>] [-i]\n", argv[0]); + printf(" -t: time to run\n"); + printf(" -n: number of threads\n"); + printf(" -i: use independent threads\n"); + return -1; + } + } + + if (thread_count > MAX_THREADS) + thread_count = MAX_THREADS; + + + setbuf(stdout, NULL); + + start = time(0); + strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&start)); + printf("%s\n", buf); + printf("Testing consistency with %i threads for %ld seconds: ", thread_count, runtime); + + /* spawn */ + for (i = 0; i < thread_count; i++) + pthread_create(&pth[i], 0, thread, 0); + + while (time(&now) < start + runtime) { + sleep(1); + if (done) { + ret = 1; + strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&now)); + printf("%s\n", buf); + goto out; + } + } + printf("[OK]\n"); + done = 1; + +out: + /* wait */ + for (i = 0; i < thread_count; i++) + pthread_join(pth[i], &tret); + + /* die */ + if (ret) + ksft_exit_fail(); + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c new file mode 100644 index 000000000000..e86d937cc22c --- /dev/null +++ b/tools/testing/selftests/timers/valid-adjtimex.c @@ -0,0 +1,202 @@ +/* valid adjtimex test + * by: John Stultz <john.stultz@linaro.org> + * (C) Copyright Linaro 2015 + * Licensed under the GPLv2 + * + * This test validates adjtimex interface with valid + * and invalid test data. + * + * Usage: valid-adjtimex + * + * To build: + * $ gcc valid-adjtimex.c -o valid-adjtimex -lrt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + + +#include <stdio.h> +#include <stdlib.h> +#include <time.h> +#include <sys/time.h> +#include <sys/timex.h> +#include <string.h> +#include <signal.h> +#include <unistd.h> +#ifdef KTEST +#include "../kselftest.h" +#else +static inline int ksft_exit_pass(void) +{ + exit(0); +} +static inline int ksft_exit_fail(void) +{ + exit(1); +} +#endif + +#define NSEC_PER_SEC 1000000000L + +/* clear NTP time_status & time_state */ +int clear_time_state(void) +{ + struct timex tx; + int ret; + + tx.modes = ADJ_STATUS; + tx.status = 0; + ret = adjtimex(&tx); + return ret; +} + +#define NUM_FREQ_VALID 32 +#define NUM_FREQ_OUTOFRANGE 4 +#define NUM_FREQ_INVALID 2 + +long valid_freq[NUM_FREQ_VALID] = { + -499<<16, + -450<<16, + -400<<16, + -350<<16, + -300<<16, + -250<<16, + -200<<16, + -150<<16, + -100<<16, + -75<<16, + -50<<16, + -25<<16, + -10<<16, + -5<<16, + -1<<16, + -1000, + 1<<16, + 5<<16, + 10<<16, + 25<<16, + 50<<16, + 75<<16, + 100<<16, + 150<<16, + 200<<16, + 250<<16, + 300<<16, + 350<<16, + 400<<16, + 450<<16, + 499<<16, +}; + +long outofrange_freq[NUM_FREQ_OUTOFRANGE] = { + -1000<<16, + -550<<16, + 550<<16, + 1000<<16, +}; + +#define LONG_MAX (~0UL>>1) +#define LONG_MIN (-LONG_MAX - 1) + +long invalid_freq[NUM_FREQ_INVALID] = { + LONG_MAX, + LONG_MIN, +}; + +int validate_freq(void) +{ + struct timex tx; + int ret, pass = 0; + int i; + + clear_time_state(); + + memset(&tx, 0, sizeof(struct timex)); + /* Set the leap second insert flag */ + + printf("Testing ADJ_FREQ... "); + for (i = 0; i < NUM_FREQ_VALID; i++) { + tx.modes = ADJ_FREQUENCY; + tx.freq = valid_freq[i]; + + ret = adjtimex(&tx); + if (ret < 0) { + printf("[FAIL]\n"); + printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n", + valid_freq[i], valid_freq[i]>>16); + pass = -1; + goto out; + } + tx.modes = 0; + ret = adjtimex(&tx); + if (tx.freq != valid_freq[i]) { + printf("Warning: freq value %ld not what we set it (%ld)!\n", + tx.freq, valid_freq[i]); + } + } + for (i = 0; i < NUM_FREQ_OUTOFRANGE; i++) { + tx.modes = ADJ_FREQUENCY; + tx.freq = outofrange_freq[i]; + + ret = adjtimex(&tx); + if (ret < 0) { + printf("[FAIL]\n"); + printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n", + outofrange_freq[i], outofrange_freq[i]>>16); + pass = -1; + goto out; + } + tx.modes = 0; + ret = adjtimex(&tx); + if (tx.freq == outofrange_freq[i]) { + printf("[FAIL]\n"); + printf("ERROR: out of range value %ld actually set!\n", + tx.freq); + pass = -1; + goto out; + } + } + + + if (sizeof(long) == 8) { /* this case only applies to 64bit systems */ + for (i = 0; i < NUM_FREQ_INVALID; i++) { + tx.modes = ADJ_FREQUENCY; + tx.freq = invalid_freq[i]; + ret = adjtimex(&tx); + if (ret >= 0) { + printf("[FAIL]\n"); + printf("Error: No failure on invalid ADJ_FREQUENCY %ld\n", + invalid_freq[i]); + pass = -1; + goto out; + } + } + } + + printf("[OK]\n"); +out: + /* reset freq to zero */ + tx.modes = ADJ_FREQUENCY; + tx.freq = 0; + ret = adjtimex(&tx); + + return pass; +} + + +int main(int argc, char **argv) +{ + if (validate_freq()) + return ksft_exit_fail(); + + return ksft_exit_pass(); +} diff --git a/tools/testing/selftests/user/Makefile b/tools/testing/selftests/user/Makefile index 12c9d15bab07..d401b63c5b1a 100644 --- a/tools/testing/selftests/user/Makefile +++ b/tools/testing/selftests/user/Makefile @@ -3,5 +3,6 @@ # No binaries, but make sure arg-less "make" doesn't trigger "run_tests" all: -run_tests: all - ./test_user_copy.sh +TEST_PROGS := test_user_copy.sh + +include ../lib.mk diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile index 077828c889f1..a5ce9534eb15 100644 --- a/tools/testing/selftests/vm/Makefile +++ b/tools/testing/selftests/vm/Makefile @@ -1,6 +1,5 @@ # Makefile for vm selftests -CC = $(CROSS_COMPILE)gcc CFLAGS = -Wall BINARIES = hugepage-mmap hugepage-shm map_hugetlb thuge-gen hugetlbfstest BINARIES += transhuge-stress @@ -9,8 +8,10 @@ all: $(BINARIES) %: %.c $(CC) $(CFLAGS) -o $@ $^ -lrt -run_tests: all - @/bin/sh ./run_vmtests || (echo "vmtests: [FAIL]"; exit 1) +TEST_PROGS := run_vmtests +TEST_FILES := $(BINARIES) + +include ../lib.mk clean: $(RM) $(BINARIES) diff --git a/tools/testing/selftests/vm/run_vmtests b/tools/testing/selftests/vm/run_vmtests index c87b6812300d..c87b6812300d 100644..100755 --- a/tools/testing/selftests/vm/run_vmtests +++ b/tools/testing/selftests/vm/run_vmtests diff --git a/tools/testing/selftests/x86/.gitignore b/tools/testing/selftests/x86/.gitignore new file mode 100644 index 000000000000..15034fef9698 --- /dev/null +++ b/tools/testing/selftests/x86/.gitignore @@ -0,0 +1,2 @@ +*_32 +*_64 diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile new file mode 100644 index 000000000000..f0a7918178dd --- /dev/null +++ b/tools/testing/selftests/x86/Makefile @@ -0,0 +1,48 @@ +.PHONY: all all_32 all_64 check_build32 clean run_tests + +TARGETS_C_BOTHBITS := sigreturn + +BINARIES_32 := $(TARGETS_C_BOTHBITS:%=%_32) +BINARIES_64 := $(TARGETS_C_BOTHBITS:%=%_64) + +CFLAGS := -O2 -g -std=gnu99 -pthread -Wall + +UNAME_P := $(shell uname -p) + +# Always build 32-bit tests +all: all_32 + +# If we're on a 64-bit host, build 64-bit tests as well +ifeq ($(shell uname -p),x86_64) +all: all_64 +endif + +all_32: check_build32 $(BINARIES_32) + +all_64: $(BINARIES_64) + +clean: + $(RM) $(BINARIES_32) $(BINARIES_64) + +run_tests: + ./run_x86_tests.sh + +$(TARGETS_C_BOTHBITS:%=%_32): %_32: %.c + $(CC) -m32 -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $^ -lrt -ldl + +$(TARGETS_C_BOTHBITS:%=%_64): %_64: %.c + $(CC) -m64 -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $^ -lrt -ldl + +check_build32: + @if ! $(CC) -m32 -o /dev/null trivial_32bit_program.c; then \ + echo "Warning: you seem to have a broken 32-bit build" 2>&1; \ + echo "environment. If you are using a Debian-like"; \ + echo " distribution, try:"; \ + echo ""; \ + echo " apt-get install gcc-multilib libc6-i386 libc6-dev-i386"; \ + echo ""; \ + echo "If you are using a Fedora-like distribution, try:"; \ + echo ""; \ + echo " yum install glibc-devel.*i686"; \ + exit 1; \ + fi diff --git a/tools/testing/selftests/x86/run_x86_tests.sh b/tools/testing/selftests/x86/run_x86_tests.sh new file mode 100644 index 000000000000..3d3ec65f3e7c --- /dev/null +++ b/tools/testing/selftests/x86/run_x86_tests.sh @@ -0,0 +1,11 @@ +#!/bin/bash + +# This is deliberately minimal. IMO kselftests should provide a standard +# script here. +./sigreturn_32 || exit 1 + +if [[ "$uname -p" -eq "x86_64" ]]; then + ./sigreturn_64 || exit 1 +fi + +exit 0 diff --git a/tools/testing/selftests/x86/sigreturn.c b/tools/testing/selftests/x86/sigreturn.c new file mode 100644 index 000000000000..b5aa1bab7416 --- /dev/null +++ b/tools/testing/selftests/x86/sigreturn.c @@ -0,0 +1,684 @@ +/* + * sigreturn.c - tests for x86 sigreturn(2) and exit-to-userspace + * Copyright (c) 2014-2015 Andrew Lutomirski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * This is a series of tests that exercises the sigreturn(2) syscall and + * the IRET / SYSRET paths in the kernel. + * + * For now, this focuses on the effects of unusual CS and SS values, + * and it has a bunch of tests to make sure that ESP/RSP is restored + * properly. + * + * The basic idea behind these tests is to raise(SIGUSR1) to create a + * sigcontext frame, plug in the values to be tested, and then return, + * which implicitly invokes sigreturn(2) and programs the user context + * as desired. + * + * For tests for which we expect sigreturn and the subsequent return to + * user mode to succeed, we return to a short trampoline that generates + * SIGTRAP so that the meat of the tests can be ordinary C code in a + * SIGTRAP handler. + * + * The inner workings of each test is documented below. + * + * Do not run on outdated, unpatched kernels at risk of nasty crashes. + */ + +#define _GNU_SOURCE + +#include <sys/time.h> +#include <time.h> +#include <stdlib.h> +#include <sys/syscall.h> +#include <unistd.h> +#include <stdio.h> +#include <string.h> +#include <inttypes.h> +#include <sys/mman.h> +#include <sys/signal.h> +#include <sys/ucontext.h> +#include <asm/ldt.h> +#include <err.h> +#include <setjmp.h> +#include <stddef.h> +#include <stdbool.h> +#include <sys/ptrace.h> +#include <sys/user.h> + +/* + * In principle, this test can run on Linux emulation layers (e.g. + * Illumos "LX branded zones"). Solaris-based kernels reserve LDT + * entries 0-5 for their own internal purposes, so start our LDT + * allocations above that reservation. (The tests don't pass on LX + * branded zones, but at least this lets them run.) + */ +#define LDT_OFFSET 6 + +/* An aligned stack accessible through some of our segments. */ +static unsigned char stack16[65536] __attribute__((aligned(4096))); + +/* + * An aligned int3 instruction used as a trampoline. Some of the tests + * want to fish out their ss values, so this trampoline copies ss to eax + * before the int3. + */ +asm (".pushsection .text\n\t" + ".type int3, @function\n\t" + ".align 4096\n\t" + "int3:\n\t" + "mov %ss,%eax\n\t" + "int3\n\t" + ".size int3, . - int3\n\t" + ".align 4096, 0xcc\n\t" + ".popsection"); +extern char int3[4096]; + +/* + * At startup, we prepapre: + * + * - ldt_nonexistent_sel: An LDT entry that doesn't exist (all-zero + * descriptor or out of bounds). + * - code16_sel: A 16-bit LDT code segment pointing to int3. + * - data16_sel: A 16-bit LDT data segment pointing to stack16. + * - npcode32_sel: A 32-bit not-present LDT code segment pointing to int3. + * - npdata32_sel: A 32-bit not-present LDT data segment pointing to stack16. + * - gdt_data16_idx: A 16-bit GDT data segment pointing to stack16. + * - gdt_npdata32_idx: A 32-bit not-present GDT data segment pointing to + * stack16. + * + * For no particularly good reason, xyz_sel is a selector value with the + * RPL and LDT bits filled in, whereas xyz_idx is just an index into the + * descriptor table. These variables will be zero if their respective + * segments could not be allocated. + */ +static unsigned short ldt_nonexistent_sel; +static unsigned short code16_sel, data16_sel, npcode32_sel, npdata32_sel; + +static unsigned short gdt_data16_idx, gdt_npdata32_idx; + +static unsigned short GDT3(int idx) +{ + return (idx << 3) | 3; +} + +static unsigned short LDT3(int idx) +{ + return (idx << 3) | 7; +} + +/* Our sigaltstack scratch space. */ +static char altstack_data[SIGSTKSZ]; + +static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), + int flags) +{ + struct sigaction sa; + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = handler; + sa.sa_flags = SA_SIGINFO | flags; + sigemptyset(&sa.sa_mask); + if (sigaction(sig, &sa, 0)) + err(1, "sigaction"); +} + +static void clearhandler(int sig) +{ + struct sigaction sa; + memset(&sa, 0, sizeof(sa)); + sa.sa_handler = SIG_DFL; + sigemptyset(&sa.sa_mask); + if (sigaction(sig, &sa, 0)) + err(1, "sigaction"); +} + +static void add_ldt(const struct user_desc *desc, unsigned short *var, + const char *name) +{ + if (syscall(SYS_modify_ldt, 1, desc, sizeof(*desc)) == 0) { + *var = LDT3(desc->entry_number); + } else { + printf("[NOTE]\tFailed to create %s segment\n", name); + *var = 0; + } +} + +static void setup_ldt(void) +{ + if ((unsigned long)stack16 > (1ULL << 32) - sizeof(stack16)) + errx(1, "stack16 is too high\n"); + if ((unsigned long)int3 > (1ULL << 32) - sizeof(int3)) + errx(1, "int3 is too high\n"); + + ldt_nonexistent_sel = LDT3(LDT_OFFSET + 2); + + const struct user_desc code16_desc = { + .entry_number = LDT_OFFSET + 0, + .base_addr = (unsigned long)int3, + .limit = 4095, + .seg_32bit = 0, + .contents = 2, /* Code, not conforming */ + .read_exec_only = 0, + .limit_in_pages = 0, + .seg_not_present = 0, + .useable = 0 + }; + add_ldt(&code16_desc, &code16_sel, "code16"); + + const struct user_desc data16_desc = { + .entry_number = LDT_OFFSET + 1, + .base_addr = (unsigned long)stack16, + .limit = 0xffff, + .seg_32bit = 0, + .contents = 0, /* Data, grow-up */ + .read_exec_only = 0, + .limit_in_pages = 0, + .seg_not_present = 0, + .useable = 0 + }; + add_ldt(&data16_desc, &data16_sel, "data16"); + + const struct user_desc npcode32_desc = { + .entry_number = LDT_OFFSET + 3, + .base_addr = (unsigned long)int3, + .limit = 4095, + .seg_32bit = 1, + .contents = 2, /* Code, not conforming */ + .read_exec_only = 0, + .limit_in_pages = 0, + .seg_not_present = 1, + .useable = 0 + }; + add_ldt(&npcode32_desc, &npcode32_sel, "npcode32"); + + const struct user_desc npdata32_desc = { + .entry_number = LDT_OFFSET + 4, + .base_addr = (unsigned long)stack16, + .limit = 0xffff, + .seg_32bit = 1, + .contents = 0, /* Data, grow-up */ + .read_exec_only = 0, + .limit_in_pages = 0, + .seg_not_present = 1, + .useable = 0 + }; + add_ldt(&npdata32_desc, &npdata32_sel, "npdata32"); + + struct user_desc gdt_data16_desc = { + .entry_number = -1, + .base_addr = (unsigned long)stack16, + .limit = 0xffff, + .seg_32bit = 0, + .contents = 0, /* Data, grow-up */ + .read_exec_only = 0, + .limit_in_pages = 0, + .seg_not_present = 0, + .useable = 0 + }; + + if (syscall(SYS_set_thread_area, &gdt_data16_desc) == 0) { + /* + * This probably indicates vulnerability to CVE-2014-8133. + * Merely getting here isn't definitive, though, and we'll + * diagnose the problem for real later on. + */ + printf("[WARN]\tset_thread_area allocated data16 at index %d\n", + gdt_data16_desc.entry_number); + gdt_data16_idx = gdt_data16_desc.entry_number; + } else { + printf("[OK]\tset_thread_area refused 16-bit data\n"); + } + + struct user_desc gdt_npdata32_desc = { + .entry_number = -1, + .base_addr = (unsigned long)stack16, + .limit = 0xffff, + .seg_32bit = 1, + .contents = 0, /* Data, grow-up */ + .read_exec_only = 0, + .limit_in_pages = 0, + .seg_not_present = 1, + .useable = 0 + }; + + if (syscall(SYS_set_thread_area, &gdt_npdata32_desc) == 0) { + /* + * As a hardening measure, newer kernels don't allow this. + */ + printf("[WARN]\tset_thread_area allocated npdata32 at index %d\n", + gdt_npdata32_desc.entry_number); + gdt_npdata32_idx = gdt_npdata32_desc.entry_number; + } else { + printf("[OK]\tset_thread_area refused 16-bit data\n"); + } +} + +/* State used by our signal handlers. */ +static gregset_t initial_regs, requested_regs, resulting_regs; + +/* Instructions for the SIGUSR1 handler. */ +static volatile unsigned short sig_cs, sig_ss; +static volatile sig_atomic_t sig_trapped, sig_err, sig_trapno; + +/* Abstractions for some 32-bit vs 64-bit differences. */ +#ifdef __x86_64__ +# define REG_IP REG_RIP +# define REG_SP REG_RSP +# define REG_AX REG_RAX + +struct selectors { + unsigned short cs, gs, fs, ss; +}; + +static unsigned short *ssptr(ucontext_t *ctx) +{ + struct selectors *sels = (void *)&ctx->uc_mcontext.gregs[REG_CSGSFS]; + return &sels->ss; +} + +static unsigned short *csptr(ucontext_t *ctx) +{ + struct selectors *sels = (void *)&ctx->uc_mcontext.gregs[REG_CSGSFS]; + return &sels->cs; +} +#else +# define REG_IP REG_EIP +# define REG_SP REG_ESP +# define REG_AX REG_EAX + +static greg_t *ssptr(ucontext_t *ctx) +{ + return &ctx->uc_mcontext.gregs[REG_SS]; +} + +static greg_t *csptr(ucontext_t *ctx) +{ + return &ctx->uc_mcontext.gregs[REG_CS]; +} +#endif + +/* Number of errors in the current test case. */ +static volatile sig_atomic_t nerrs; + +/* + * SIGUSR1 handler. Sets CS and SS as requested and points IP to the + * int3 trampoline. Sets SP to a large known value so that we can see + * whether the value round-trips back to user mode correctly. + */ +static void sigusr1(int sig, siginfo_t *info, void *ctx_void) +{ + ucontext_t *ctx = (ucontext_t*)ctx_void; + + memcpy(&initial_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t)); + + *csptr(ctx) = sig_cs; + *ssptr(ctx) = sig_ss; + + ctx->uc_mcontext.gregs[REG_IP] = + sig_cs == code16_sel ? 0 : (unsigned long)&int3; + ctx->uc_mcontext.gregs[REG_SP] = (unsigned long)0x8badf00d5aadc0deULL; + ctx->uc_mcontext.gregs[REG_AX] = 0; + + memcpy(&requested_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t)); + requested_regs[REG_AX] = *ssptr(ctx); /* The asm code does this. */ + + return; +} + +/* + * Called after a successful sigreturn. Restores our state so that + * the original raise(SIGUSR1) returns. + */ +static void sigtrap(int sig, siginfo_t *info, void *ctx_void) +{ + ucontext_t *ctx = (ucontext_t*)ctx_void; + + sig_err = ctx->uc_mcontext.gregs[REG_ERR]; + sig_trapno = ctx->uc_mcontext.gregs[REG_TRAPNO]; + + unsigned short ss; + asm ("mov %%ss,%0" : "=r" (ss)); + + greg_t asm_ss = ctx->uc_mcontext.gregs[REG_AX]; + if (asm_ss != sig_ss && sig == SIGTRAP) { + /* Sanity check failure. */ + printf("[FAIL]\tSIGTRAP: ss = %hx, frame ss = %hx, ax = %llx\n", + ss, *ssptr(ctx), (unsigned long long)asm_ss); + nerrs++; + } + + memcpy(&resulting_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t)); + memcpy(&ctx->uc_mcontext.gregs, &initial_regs, sizeof(gregset_t)); + + sig_trapped = sig; +} + +/* + * Checks a given selector for its code bitness or returns -1 if it's not + * a usable code segment selector. + */ +int cs_bitness(unsigned short cs) +{ + uint32_t valid = 0, ar; + asm ("lar %[cs], %[ar]\n\t" + "jnz 1f\n\t" + "mov $1, %[valid]\n\t" + "1:" + : [ar] "=r" (ar), [valid] "+rm" (valid) + : [cs] "r" (cs)); + + if (!valid) + return -1; + + bool db = (ar & (1 << 22)); + bool l = (ar & (1 << 21)); + + if (!(ar & (1<<11))) + return -1; /* Not code. */ + + if (l && !db) + return 64; + else if (!l && db) + return 32; + else if (!l && !db) + return 16; + else + return -1; /* Unknown bitness. */ +} + +/* Finds a usable code segment of the requested bitness. */ +int find_cs(int bitness) +{ + unsigned short my_cs; + + asm ("mov %%cs,%0" : "=r" (my_cs)); + + if (cs_bitness(my_cs) == bitness) + return my_cs; + if (cs_bitness(my_cs + (2 << 3)) == bitness) + return my_cs + (2 << 3); + if (my_cs > (2<<3) && cs_bitness(my_cs - (2 << 3)) == bitness) + return my_cs - (2 << 3); + if (cs_bitness(code16_sel) == bitness) + return code16_sel; + + printf("[WARN]\tCould not find %d-bit CS\n", bitness); + return -1; +} + +static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss) +{ + int cs = find_cs(cs_bits); + if (cs == -1) { + printf("[SKIP]\tCode segment unavailable for %d-bit CS, %d-bit SS\n", + cs_bits, use_16bit_ss ? 16 : 32); + return 0; + } + + if (force_ss != -1) { + sig_ss = force_ss; + } else { + if (use_16bit_ss) { + if (!data16_sel) { + printf("[SKIP]\tData segment unavailable for %d-bit CS, 16-bit SS\n", + cs_bits); + return 0; + } + sig_ss = data16_sel; + } else { + asm volatile ("mov %%ss,%0" : "=r" (sig_ss)); + } + } + + sig_cs = cs; + + printf("[RUN]\tValid sigreturn: %d-bit CS (%hx), %d-bit SS (%hx%s)\n", + cs_bits, sig_cs, use_16bit_ss ? 16 : 32, sig_ss, + (sig_ss & 4) ? "" : ", GDT"); + + raise(SIGUSR1); + + nerrs = 0; + + /* + * Check that each register had an acceptable value when the + * int3 trampoline was invoked. + */ + for (int i = 0; i < NGREG; i++) { + greg_t req = requested_regs[i], res = resulting_regs[i]; + if (i == REG_TRAPNO || i == REG_IP) + continue; /* don't care */ + if (i == REG_SP) { + printf("\tSP: %llx -> %llx\n", (unsigned long long)req, + (unsigned long long)res); + + /* + * In many circumstances, the high 32 bits of rsp + * are zeroed. For example, we could be a real + * 32-bit program, or we could hit any of a number + * of poorly-documented IRET or segmented ESP + * oddities. If this happens, it's okay. + */ + if (res == (req & 0xFFFFFFFF)) + continue; /* OK; not expected to work */ + } + + bool ignore_reg = false; +#if __i386__ + if (i == REG_UESP) + ignore_reg = true; +#else + if (i == REG_CSGSFS) { + struct selectors *req_sels = + (void *)&requested_regs[REG_CSGSFS]; + struct selectors *res_sels = + (void *)&resulting_regs[REG_CSGSFS]; + if (req_sels->cs != res_sels->cs) { + printf("[FAIL]\tCS mismatch: requested 0x%hx; got 0x%hx\n", + req_sels->cs, res_sels->cs); + nerrs++; + } + + if (req_sels->ss != res_sels->ss) { + printf("[FAIL]\tSS mismatch: requested 0x%hx; got 0x%hx\n", + req_sels->ss, res_sels->ss); + nerrs++; + } + + continue; + } +#endif + + /* Sanity check on the kernel */ + if (i == REG_AX && requested_regs[i] != resulting_regs[i]) { + printf("[FAIL]\tAX (saved SP) mismatch: requested 0x%llx; got 0x%llx\n", + (unsigned long long)requested_regs[i], + (unsigned long long)resulting_regs[i]); + nerrs++; + continue; + } + + if (requested_regs[i] != resulting_regs[i] && !ignore_reg) { + /* + * SP is particularly interesting here. The + * usual cause of failures is that we hit the + * nasty IRET case of returning to a 16-bit SS, + * in which case bits 16:31 of the *kernel* + * stack pointer persist in ESP. + */ + printf("[FAIL]\tReg %d mismatch: requested 0x%llx; got 0x%llx\n", + i, (unsigned long long)requested_regs[i], + (unsigned long long)resulting_regs[i]); + nerrs++; + } + } + + if (nerrs == 0) + printf("[OK]\tall registers okay\n"); + + return nerrs; +} + +static int test_bad_iret(int cs_bits, unsigned short ss, int force_cs) +{ + int cs = force_cs == -1 ? find_cs(cs_bits) : force_cs; + if (cs == -1) + return 0; + + sig_cs = cs; + sig_ss = ss; + + printf("[RUN]\t%d-bit CS (%hx), bogus SS (%hx)\n", + cs_bits, sig_cs, sig_ss); + + sig_trapped = 0; + raise(SIGUSR1); + if (sig_trapped) { + char errdesc[32] = ""; + if (sig_err) { + const char *src = (sig_err & 1) ? " EXT" : ""; + const char *table; + if ((sig_err & 0x6) == 0x0) + table = "GDT"; + else if ((sig_err & 0x6) == 0x4) + table = "LDT"; + else if ((sig_err & 0x6) == 0x2) + table = "IDT"; + else + table = "???"; + + sprintf(errdesc, "%s%s index %d, ", + table, src, sig_err >> 3); + } + + char trapname[32]; + if (sig_trapno == 13) + strcpy(trapname, "GP"); + else if (sig_trapno == 11) + strcpy(trapname, "NP"); + else if (sig_trapno == 12) + strcpy(trapname, "SS"); + else if (sig_trapno == 32) + strcpy(trapname, "IRET"); /* X86_TRAP_IRET */ + else + sprintf(trapname, "%d", sig_trapno); + + printf("[OK]\tGot #%s(0x%lx) (i.e. %s%s)\n", + trapname, (unsigned long)sig_err, + errdesc, strsignal(sig_trapped)); + return 0; + } else { + printf("[FAIL]\tDid not get SIGSEGV\n"); + return 1; + } +} + +int main() +{ + int total_nerrs = 0; + unsigned short my_cs, my_ss; + + asm volatile ("mov %%cs,%0" : "=r" (my_cs)); + asm volatile ("mov %%ss,%0" : "=r" (my_ss)); + setup_ldt(); + + stack_t stack = { + .ss_sp = altstack_data, + .ss_size = SIGSTKSZ, + }; + if (sigaltstack(&stack, NULL) != 0) + err(1, "sigaltstack"); + + sethandler(SIGUSR1, sigusr1, 0); + sethandler(SIGTRAP, sigtrap, SA_ONSTACK); + + /* Easy cases: return to a 32-bit SS in each possible CS bitness. */ + total_nerrs += test_valid_sigreturn(64, false, -1); + total_nerrs += test_valid_sigreturn(32, false, -1); + total_nerrs += test_valid_sigreturn(16, false, -1); + + /* + * Test easy espfix cases: return to a 16-bit LDT SS in each possible + * CS bitness. NB: with a long mode CS, the SS bitness is irrelevant. + * + * This catches the original missing-espfix-on-64-bit-kernels issue + * as well as CVE-2014-8134. + */ + total_nerrs += test_valid_sigreturn(64, true, -1); + total_nerrs += test_valid_sigreturn(32, true, -1); + total_nerrs += test_valid_sigreturn(16, true, -1); + + if (gdt_data16_idx) { + /* + * For performance reasons, Linux skips espfix if SS points + * to the GDT. If we were able to allocate a 16-bit SS in + * the GDT, see if it leaks parts of the kernel stack pointer. + * + * This tests for CVE-2014-8133. + */ + total_nerrs += test_valid_sigreturn(64, true, + GDT3(gdt_data16_idx)); + total_nerrs += test_valid_sigreturn(32, true, + GDT3(gdt_data16_idx)); + total_nerrs += test_valid_sigreturn(16, true, + GDT3(gdt_data16_idx)); + } + + /* + * We're done testing valid sigreturn cases. Now we test states + * for which sigreturn itself will succeed but the subsequent + * entry to user mode will fail. + * + * Depending on the failure mode and the kernel bitness, these + * entry failures can generate SIGSEGV, SIGBUS, or SIGILL. + */ + clearhandler(SIGTRAP); + sethandler(SIGSEGV, sigtrap, SA_ONSTACK); + sethandler(SIGBUS, sigtrap, SA_ONSTACK); + sethandler(SIGILL, sigtrap, SA_ONSTACK); /* 32-bit kernels do this */ + + /* Easy failures: invalid SS, resulting in #GP(0) */ + test_bad_iret(64, ldt_nonexistent_sel, -1); + test_bad_iret(32, ldt_nonexistent_sel, -1); + test_bad_iret(16, ldt_nonexistent_sel, -1); + + /* These fail because SS isn't a data segment, resulting in #GP(SS) */ + test_bad_iret(64, my_cs, -1); + test_bad_iret(32, my_cs, -1); + test_bad_iret(16, my_cs, -1); + + /* Try to return to a not-present code segment, triggering #NP(SS). */ + test_bad_iret(32, my_ss, npcode32_sel); + + /* + * Try to return to a not-present but otherwise valid data segment. + * This will cause IRET to fail with #SS on the espfix stack. This + * exercises CVE-2014-9322. + * + * Note that, if espfix is enabled, 64-bit Linux will lose track + * of the actual cause of failure and report #GP(0) instead. + * This would be very difficult for Linux to avoid, because + * espfix64 causes IRET failures to be promoted to #DF, so the + * original exception frame is never pushed onto the stack. + */ + test_bad_iret(32, npdata32_sel, -1); + + /* + * Try to return to a not-present but otherwise valid data + * segment without invoking espfix. Newer kernels don't allow + * this to happen in the first place. On older kernels, though, + * this can trigger CVE-2014-9322. + */ + if (gdt_npdata32_idx) + test_bad_iret(32, GDT3(gdt_npdata32_idx), -1); + + return total_nerrs ? 1 : 0; +} diff --git a/tools/testing/selftests/x86/trivial_32bit_program.c b/tools/testing/selftests/x86/trivial_32bit_program.c new file mode 100644 index 000000000000..2e231beb0a39 --- /dev/null +++ b/tools/testing/selftests/x86/trivial_32bit_program.c @@ -0,0 +1,14 @@ +/* + * Trivial program to check that we have a valid 32-bit build environment. + * Copyright (c) 2015 Andy Lutomirski + * GPL v2 + */ + +#include <stdio.h> + +int main() +{ + printf("\n"); + + return 0; +} |