diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/testing/selftests/powerpc/Makefile | 1 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/nx-gzip/Makefile | 8 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c | 433 | ||||
| -rw-r--r-- | tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c | 316 | ||||
| -rwxr-xr-x | tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh | 45 |
5 files changed, 803 insertions, 0 deletions
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile index 644770c3b754..0830e63818c1 100644 --- a/tools/testing/selftests/powerpc/Makefile +++ b/tools/testing/selftests/powerpc/Makefile @@ -19,6 +19,7 @@ SUB_DIRS = alignment \ copyloops \ dscr \ mm \ + nx-gzip \ pmu \ signal \ primitives \ diff --git a/tools/testing/selftests/powerpc/nx-gzip/Makefile b/tools/testing/selftests/powerpc/nx-gzip/Makefile new file mode 100644 index 000000000000..016e528a0a94 --- /dev/null +++ b/tools/testing/selftests/powerpc/nx-gzip/Makefile @@ -0,0 +1,8 @@ +CFLAGS = -O3 -m64 -I./include + +TEST_GEN_FILES := gzfht_test +TEST_PROGS := nx-gzip-test.sh + +include ../../lib.mk + +$(TEST_GEN_FILES): gzip_vas.c diff --git a/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c b/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c new file mode 100644 index 000000000000..7496a83f9c9d --- /dev/null +++ b/tools/testing/selftests/powerpc/nx-gzip/gzfht_test.c @@ -0,0 +1,433 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +/* P9 gzip sample code for demonstrating the P9 NX hardware interface. + * Not intended for productive uses or for performance or compression + * ratio measurements. For simplicity of demonstration, this sample + * code compresses in to fixed Huffman blocks only (Deflate btype=1) + * and has very simple memory management. Dynamic Huffman blocks + * (Deflate btype=2) are more involved as detailed in the user guide. + * Note also that /dev/crypto/gzip, VAS and skiboot support are + * required. + * + * Copyright 2020 IBM Corp. + * + * https://github.com/libnxz/power-gzip for zlib api and other utils + * + * Author: Bulent Abali <abali@us.ibm.com> + * + * Definitions of acronyms used here. See + * P9 NX Gzip Accelerator User's Manual for details: + * https://github.com/libnxz/power-gzip/blob/develop/doc/power_nx_gzip_um.pdf + * + * adler/crc: 32 bit checksums appended to stream tail + * ce: completion extension + * cpb: coprocessor parameter block (metadata) + * crb: coprocessor request block (command) + * csb: coprocessor status block (status) + * dht: dynamic huffman table + * dde: data descriptor element (address, length) + * ddl: list of ddes + * dh/fh: dynamic and fixed huffman types + * fc: coprocessor function code + * histlen: history/dictionary length + * history: sliding window of up to 32KB of data + * lzcount: Deflate LZ symbol counts + * rembytecnt: remaining byte count + * sfbt: source final block type; last block's type during decomp + * spbc: source processed byte count + * subc: source unprocessed bit count + * tebc: target ending bit count; valid bits in the last byte + * tpbc: target processed byte count + * vas: virtual accelerator switch; the user mode interface + */ + +#define _ISOC11_SOURCE // For aligned_alloc() +#define _DEFAULT_SOURCE // For endian.h + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <stdint.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/time.h> +#include <sys/fcntl.h> +#include <sys/mman.h> +#include <endian.h> +#include <bits/endian.h> +#include <sys/ioctl.h> +#include <assert.h> +#include <errno.h> +#include <signal.h> +#include "nxu.h" +#include "nx.h" + +int nx_dbg; +FILE *nx_gzip_log; + +#define NX_MIN(X, Y) (((X) < (Y)) ? (X) : (Y)) +#define FNAME_MAX 1024 +#define FEXT ".nx.gz" + +/* + * LZ counts returned in the user supplied nx_gzip_crb_cpb_t structure. + */ +static int compress_fht_sample(char *src, uint32_t srclen, char *dst, + uint32_t dstlen, int with_count, + struct nx_gzip_crb_cpb_t *cmdp, void *handle) +{ + uint32_t fc; + + assert(!!cmdp); + + put32(cmdp->crb, gzip_fc, 0); /* clear */ + fc = (with_count) ? GZIP_FC_COMPRESS_RESUME_FHT_COUNT : + GZIP_FC_COMPRESS_RESUME_FHT; + putnn(cmdp->crb, gzip_fc, fc); + putnn(cmdp->cpb, in_histlen, 0); /* resuming with no history */ + memset((void *) &cmdp->crb.csb, 0, sizeof(cmdp->crb.csb)); + + /* Section 6.6 programming notes; spbc may be in two different + * places depending on FC. + */ + if (!with_count) + put32(cmdp->cpb, out_spbc_comp, 0); + else + put32(cmdp->cpb, out_spbc_comp_with_count, 0); + + /* Figure 6-3 6-4; CSB location */ + put64(cmdp->crb, csb_address, 0); + put64(cmdp->crb, csb_address, + (uint64_t) &cmdp->crb.csb & csb_address_mask); + + /* Source direct dde (scatter-gather list) */ + clear_dde(cmdp->crb.source_dde); + putnn(cmdp->crb.source_dde, dde_count, 0); + put32(cmdp->crb.source_dde, ddebc, srclen); + put64(cmdp->crb.source_dde, ddead, (uint64_t) src); + + /* Target direct dde (scatter-gather list) */ + clear_dde(cmdp->crb.target_dde); + putnn(cmdp->crb.target_dde, dde_count, 0); + put32(cmdp->crb.target_dde, ddebc, dstlen); + put64(cmdp->crb.target_dde, ddead, (uint64_t) dst); + + /* Submit the crb, the job descriptor, to the accelerator */ + return nxu_submit_job(cmdp, handle); +} + +/* + * Prepares a blank no filename no timestamp gzip header and returns + * the number of bytes written to buf. + * Gzip specification at https://tools.ietf.org/html/rfc1952 + */ +int gzip_header_blank(char *buf) +{ + int i = 0; + + buf[i++] = 0x1f; /* ID1 */ + buf[i++] = 0x8b; /* ID2 */ + buf[i++] = 0x08; /* CM */ + buf[i++] = 0x00; /* FLG */ + buf[i++] = 0x00; /* MTIME */ + buf[i++] = 0x00; /* MTIME */ + buf[i++] = 0x00; /* MTIME */ + buf[i++] = 0x00; /* MTIME */ + buf[i++] = 0x04; /* XFL 4=fastest */ + buf[i++] = 0x03; /* OS UNIX */ + + return i; +} + +/* Caller must free the allocated buffer return nonzero on error. */ +int read_alloc_input_file(char *fname, char **buf, size_t *bufsize) +{ + struct stat statbuf; + FILE *fp; + char *p; + size_t num_bytes; + + if (stat(fname, &statbuf)) { + perror(fname); + return(-1); + } + fp = fopen(fname, "r"); + if (fp == NULL) { + perror(fname); + return(-1); + } + assert(NULL != (p = (char *) malloc(statbuf.st_size))); + num_bytes = fread(p, 1, statbuf.st_size, fp); + if (ferror(fp) || (num_bytes != statbuf.st_size)) { + perror(fname); + return(-1); + } + *buf = p; + *bufsize = num_bytes; + return 0; +} + +/* Returns nonzero on error */ +int write_output_file(char *fname, char *buf, size_t bufsize) +{ + FILE *fp; + size_t num_bytes; + + fp = fopen(fname, "w"); + if (fp == NULL) { + perror(fname); + return(-1); + } + num_bytes = fwrite(buf, 1, bufsize, fp); + if (ferror(fp) || (num_bytes != bufsize)) { + perror(fname); + return(-1); + } + fclose(fp); + return 0; +} + +/* + * Z_SYNC_FLUSH as described in zlib.h. + * Returns number of appended bytes + */ +int append_sync_flush(char *buf, int tebc, int final) +{ + uint64_t flush; + int shift = (tebc & 0x7); + + if (tebc > 0) { + /* Last byte is partially full */ + buf = buf - 1; + *buf = *buf & (unsigned char) ((1<<tebc)-1); + } else + *buf = 0; + flush = ((0x1ULL & final) << shift) | *buf; + shift = shift + 3; /* BFINAL and BTYPE written */ + shift = (shift <= 8) ? 8 : 16; + flush |= (0xFFFF0000ULL) << shift; /* Zero length block */ + shift = shift + 32; + while (shift > 0) { + *buf++ = (unsigned char) (flush & 0xffULL); + flush = flush >> 8; + shift = shift - 8; + } + return(((tebc > 5) || (tebc == 0)) ? 5 : 4); +} + +/* + * Final deflate block bit. This call assumes the block + * beginning is byte aligned. + */ +static void set_bfinal(void *buf, int bfinal) +{ + char *b = buf; + + if (bfinal) + *b = *b | (unsigned char) 0x01; + else + *b = *b & (unsigned char) 0xfe; +} + +int compress_file(int argc, char **argv, void *handle) +{ + char *inbuf, *outbuf, *srcbuf, *dstbuf; + char outname[FNAME_MAX]; + uint32_t srclen, dstlen; + uint32_t flushlen, chunk; + size_t inlen, outlen, dsttotlen, srctotlen; + uint32_t crc, spbc, tpbc, tebc; + int lzcounts = 0; + int cc; + int num_hdr_bytes; + struct nx_gzip_crb_cpb_t *cmdp; + uint32_t pagelen = 65536; + int fault_tries = NX_MAX_FAULTS; + + cmdp = (void *)(uintptr_t) + aligned_alloc(sizeof(struct nx_gzip_crb_cpb_t), + sizeof(struct nx_gzip_crb_cpb_t)); + + if (argc != 2) { + fprintf(stderr, "usage: %s <fname>\n", argv[0]); + exit(-1); + } + if (read_alloc_input_file(argv[1], &inbuf, &inlen)) + exit(-1); + fprintf(stderr, "file %s read, %ld bytes\n", argv[1], inlen); + + /* Generous output buffer for header/trailer */ + outlen = 2 * inlen + 1024; + + assert(NULL != (outbuf = (char *)malloc(outlen))); + nxu_touch_pages(outbuf, outlen, pagelen, 1); + + /* Compress piecemeal in smallish chunks */ + chunk = 1<<22; + + /* Write the gzip header to the stream */ + num_hdr_bytes = gzip_header_blank(outbuf); + dstbuf = outbuf + num_hdr_bytes; + outlen = outlen - num_hdr_bytes; + dsttotlen = num_hdr_bytes; + + srcbuf = inbuf; + srctotlen = 0; + + /* Init the CRB, the coprocessor request block */ + memset(&cmdp->crb, 0, sizeof(cmdp->crb)); + + /* Initial gzip crc32 */ + put32(cmdp->cpb, in_crc, 0); + + while (inlen > 0) { + + /* Submit chunk size source data per job */ + srclen = NX_MIN(chunk, inlen); + /* Supply large target in case data expands */ + dstlen = NX_MIN(2*srclen, outlen); + + /* Page faults are handled by the user code */ + + /* Fault-in pages; an improved code wouldn't touch so + * many pages but would try to estimate the + * compression ratio and adjust both the src and dst + * touch amounts. + */ + nxu_touch_pages(cmdp, sizeof(struct nx_gzip_crb_cpb_t), pagelen, + 1); + nxu_touch_pages(srcbuf, srclen, pagelen, 0); + nxu_touch_pages(dstbuf, dstlen, pagelen, 1); + + cc = compress_fht_sample( + srcbuf, srclen, + dstbuf, dstlen, + lzcounts, cmdp, handle); + + if (cc != ERR_NX_OK && cc != ERR_NX_TPBC_GT_SPBC && + cc != ERR_NX_TRANSLATION) { + fprintf(stderr, "nx error: cc= %d\n", cc); + exit(-1); + } + + /* Page faults are handled by the user code */ + if (cc == ERR_NX_TRANSLATION) { + NXPRT(fprintf(stderr, "page fault: cc= %d, ", cc)); + NXPRT(fprintf(stderr, "try= %d, fsa= %08llx\n", + fault_tries, + (unsigned long long) cmdp->crb.csb.fsaddr)); + fault_tries--; + if (fault_tries > 0) { + continue; + } else { + fprintf(stderr, "error: cannot progress; "); + fprintf(stderr, "too many faults\n"); + exit(-1); + }; + } + + fault_tries = NX_MAX_FAULTS; /* Reset for the next chunk */ + + inlen = inlen - srclen; + srcbuf = srcbuf + srclen; + srctotlen = srctotlen + srclen; + + /* Two possible locations for spbc depending on the function + * code. + */ + spbc = (!lzcounts) ? get32(cmdp->cpb, out_spbc_comp) : + get32(cmdp->cpb, out_spbc_comp_with_count); + assert(spbc == srclen); + + /* Target byte count */ + tpbc = get32(cmdp->crb.csb, tpbc); + /* Target ending bit count */ + tebc = getnn(cmdp->cpb, out_tebc); + NXPRT(fprintf(stderr, "compressed chunk %d ", spbc)); + NXPRT(fprintf(stderr, "to %d bytes, tebc= %d\n", tpbc, tebc)); + + if (inlen > 0) { /* More chunks to go */ + set_bfinal(dstbuf, 0); + dstbuf = dstbuf + tpbc; + dsttotlen = dsttotlen + tpbc; + outlen = outlen - tpbc; + /* Round up to the next byte with a flush + * block; do not set the BFINAqL bit. + */ + flushlen = append_sync_flush(dstbuf, tebc, 0); + dsttotlen = dsttotlen + flushlen; + outlen = outlen - flushlen; + dstbuf = dstbuf + flushlen; + NXPRT(fprintf(stderr, "added sync_flush %d bytes\n", + flushlen)); + } else { /* Done */ + /* Set the BFINAL bit of the last block per Deflate + * specification. + */ + set_bfinal(dstbuf, 1); + dstbuf = dstbuf + tpbc; + dsttotlen = dsttotlen + tpbc; + outlen = outlen - tpbc; + } + + /* Resuming crc32 for the next chunk */ + crc = get32(cmdp->cpb, out_crc); + put32(cmdp->cpb, in_crc, crc); + crc = be32toh(crc); + } + + /* Append crc32 and ISIZE to the end */ + memcpy(dstbuf, &crc, 4); + memcpy(dstbuf+4, &srctotlen, 4); + dsttotlen = dsttotlen + 8; + outlen = outlen - 8; + + assert(FNAME_MAX > (strlen(argv[1]) + strlen(FEXT))); + strcpy(outname, argv[1]); + strcat(outname, FEXT); + if (write_output_file(outname, outbuf, dsttotlen)) { + fprintf(stderr, "write error: %s\n", outname); + exit(-1); + } + + fprintf(stderr, "compressed %ld to %ld bytes total, ", srctotlen, + dsttotlen); + fprintf(stderr, "crc32 checksum = %08x\n", crc); + + if (inbuf != NULL) + free(inbuf); + + if (outbuf != NULL) + free(outbuf); + + return 0; +} + +int main(int argc, char **argv) +{ + int rc; + struct sigaction act; + void *handle; + + nx_dbg = 0; + nx_gzip_log = NULL; + act.sa_handler = 0; + act.sa_sigaction = nxu_sigsegv_handler; + act.sa_flags = SA_SIGINFO; + act.sa_restorer = 0; + sigemptyset(&act.sa_mask); + sigaction(SIGSEGV, &act, NULL); + + handle = nx_function_begin(NX_FUNC_COMP_GZIP, 0); + if (!handle) { + fprintf(stderr, "Unable to init NX, errno %d\n", errno); + exit(-1); + } + + rc = compress_file(argc, argv, handle); + + nx_function_end(handle); + + return rc; +} diff --git a/tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c b/tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c new file mode 100644 index 000000000000..c055885da40a --- /dev/null +++ b/tools/testing/selftests/powerpc/nx-gzip/gzip_vas.c @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +/* + * Copyright 2020 IBM Corp. + * + * Author: Bulent Abali <abali@us.ibm.com> + * + */ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <stdint.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/time.h> +#include <sys/fcntl.h> +#include <sys/mman.h> +#include <endian.h> +#include <bits/endian.h> +#include <sys/ioctl.h> +#include <assert.h> +#include <errno.h> +#include <signal.h> +#include "vas-api.h" +#include "nx.h" +#include "copy-paste.h" +#include "nxu.h" +#include "nx_dbg.h" +#include <sys/platform/ppc.h> + +#define barrier() +#define hwsync() ({ asm volatile("sync" ::: "memory"); }) + +#ifndef NX_NO_CPU_PRI +#define cpu_pri_default() ({ asm volatile ("or 2, 2, 2"); }) +#define cpu_pri_low() ({ asm volatile ("or 31, 31, 31"); }) +#else +#define cpu_pri_default() +#define cpu_pri_low() +#endif + +void *nx_fault_storage_address; + +struct nx_handle { + int fd; + int function; + void *paste_addr; +}; + +static int open_device_nodes(char *devname, int pri, struct nx_handle *handle) +{ + int rc, fd; + void *addr; + struct vas_tx_win_open_attr txattr; + + fd = open(devname, O_RDWR); + if (fd < 0) { + fprintf(stderr, " open device name %s\n", devname); + return -errno; + } + + memset(&txattr, 0, sizeof(txattr)); + txattr.version = 1; + txattr.vas_id = pri; + rc = ioctl(fd, VAS_TX_WIN_OPEN, (unsigned long)&txattr); + if (rc < 0) { + fprintf(stderr, "ioctl() n %d, error %d\n", rc, errno); + rc = -errno; + goto out; + } + + addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0ULL); + if (addr == MAP_FAILED) { + fprintf(stderr, "mmap() failed, errno %d\n", errno); + rc = -errno; + goto out; + } + handle->fd = fd; + handle->paste_addr = (void *)((char *)addr + 0x400); + + rc = 0; +out: + close(fd); + return rc; +} + +void *nx_function_begin(int function, int pri) +{ + int rc; + char *devname = "/dev/crypto/nx-gzip"; + struct nx_handle *nxhandle; + + if (function != NX_FUNC_COMP_GZIP) { + errno = EINVAL; + fprintf(stderr, " NX_FUNC_COMP_GZIP not found\n"); + return NULL; + } + + + nxhandle = malloc(sizeof(*nxhandle)); + if (!nxhandle) { + errno = ENOMEM; + fprintf(stderr, " No memory\n"); + return NULL; + } + + nxhandle->function = function; + rc = open_device_nodes(devname, pri, nxhandle); + if (rc < 0) { + errno = -rc; + fprintf(stderr, " open_device_nodes failed\n"); + return NULL; + } + + return nxhandle; +} + +int nx_function_end(void *handle) +{ + int rc = 0; + struct nx_handle *nxhandle = handle; + + rc = munmap(nxhandle->paste_addr - 0x400, 4096); + if (rc < 0) { + fprintf(stderr, "munmap() failed, errno %d\n", errno); + return rc; + } + close(nxhandle->fd); + free(nxhandle); + + return rc; +} + +static int nx_wait_for_csb(struct nx_gzip_crb_cpb_t *cmdp) +{ + long poll = 0; + uint64_t t; + + /* Save power and let other threads use the h/w. top may show + * 100% but only because OS doesn't know we slowed the this + * h/w thread while polling. We're letting other threads have + * higher throughput on the core. + */ + cpu_pri_low(); + +#define CSB_MAX_POLL 200000000UL +#define USLEEP_TH 300000UL + + t = __ppc_get_timebase(); + + while (getnn(cmdp->crb.csb, csb_v) == 0) { + ++poll; + hwsync(); + + cpu_pri_low(); + + /* usleep(0) takes around 29000 ticks ~60 us. + * 300000 is spinning for about 600 us then + * start sleeping. + */ + if ((__ppc_get_timebase() - t) > USLEEP_TH) { + cpu_pri_default(); + usleep(1); + } + + if (poll > CSB_MAX_POLL) + break; + + /* Fault address from signal handler */ + if (nx_fault_storage_address) { + cpu_pri_default(); + return -EAGAIN; + } + + } + + cpu_pri_default(); + + /* hw has updated csb and output buffer */ + hwsync(); + + /* Check CSB flags. */ + if (getnn(cmdp->crb.csb, csb_v) == 0) { + fprintf(stderr, "CSB still not valid after %d polls.\n", + (int) poll); + prt_err("CSB still not valid after %d polls, giving up.\n", + (int) poll); + return -ETIMEDOUT; + } + + return 0; +} + +static int nxu_run_job(struct nx_gzip_crb_cpb_t *cmdp, void *handle) +{ + int i, ret, retries; + struct nx_handle *nxhandle = handle; + + assert(handle != NULL); + i = 0; + retries = 5000; + while (i++ < retries) { + hwsync(); + vas_copy(&cmdp->crb, 0); + ret = vas_paste(nxhandle->paste_addr, 0); + hwsync(); + + NXPRT(fprintf(stderr, "Paste attempt %d/%d returns 0x%x\n", + i, retries, ret)); + + if ((ret == 2) || (ret == 3)) { + + ret = nx_wait_for_csb(cmdp); + if (!ret) { + goto out; + } else if (ret == -EAGAIN) { + long x; + + prt_err("Touching address %p, 0x%lx\n", + nx_fault_storage_address, + *(long *) nx_fault_storage_address); + x = *(long *) nx_fault_storage_address; + *(long *) nx_fault_storage_address = x; + nx_fault_storage_address = 0; + continue; + } else { + prt_err("wait_for_csb() returns %d\n", ret); + break; + } + } else { + if (i < 10) { + /* spin for few ticks */ +#define SPIN_TH 500UL + uint64_t fail_spin; + + fail_spin = __ppc_get_timebase(); + while ((__ppc_get_timebase() - fail_spin) < + SPIN_TH) + ; + } else { + /* sleep */ + unsigned int pr = 0; + + if (pr++ % 100 == 0) { + prt_err("Paste attempt %d/", i); + prt_err("%d, failed pid= %d\n", retries, + getpid()); + } + usleep(1); + } + continue; + } + } + +out: + cpu_pri_default(); + + return ret; +} + +int nxu_submit_job(struct nx_gzip_crb_cpb_t *cmdp, void *handle) +{ + int cc; + + cc = nxu_run_job(cmdp, handle); + + if (!cc) + cc = getnn(cmdp->crb.csb, csb_cc); /* CC Table 6-8 */ + + return cc; +} + + +void nxu_sigsegv_handler(int sig, siginfo_t *info, void *ctx) +{ + fprintf(stderr, "%d: Got signal %d si_code %d, si_addr %p\n", getpid(), + sig, info->si_code, info->si_addr); + + nx_fault_storage_address = info->si_addr; +} + +/* + * Fault in pages prior to NX job submission. wr=1 may be required to + * touch writeable pages. System zero pages do not fault-in the page as + * intended. Typically set wr=1 for NX target pages and set wr=0 for NX + * source pages. + */ +int nxu_touch_pages(void *buf, long buf_len, long page_len, int wr) +{ + char *begin = buf; + char *end = (char *) buf + buf_len - 1; + volatile char t; + + assert(buf_len >= 0 && !!buf); + + NXPRT(fprintf(stderr, "touch %p %p len 0x%lx wr=%d\n", buf, + (buf + buf_len), buf_len, wr)); + + if (buf_len <= 0 || buf == NULL) + return -1; + + do { + t = *begin; + if (wr) + *begin = t; + begin = begin + page_len; + } while (begin < end); + + /* When buf_sz is small or buf tail is in another page */ + t = *end; + if (wr) + *end = t; + + return 0; +} diff --git a/tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh b/tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh new file mode 100755 index 000000000000..7cc7256ba1c7 --- /dev/null +++ b/tools/testing/selftests/powerpc/nx-gzip/nx-gzip-test.sh @@ -0,0 +1,45 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later + +if [[ ! -w /dev/crypto/nx-gzip ]]; then + echo "Can't access /dev/crypto/nx-gzip, skipping" + echo "skip: $0" + exit 4 +fi + +set -e + +function cleanup +{ + rm -f nx-tempfile* +} + +trap cleanup EXIT + +function test_sizes +{ + local n=$1 + local fname="nx-tempfile.$n" + + for size in 4K 64K 1M 64M + do + echo "Testing $size ($n) ..." + dd if=/dev/urandom of=$fname bs=$size count=1 + ./gzfht_test $fname + done +} + +echo "Doing basic test of different sizes ..." +test_sizes 0 + +echo "Running tests in parallel ..." +for i in {1..16} +do + test_sizes $i & +done + +wait + +echo "OK" + +exit 0 |