summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* rt2x00: Fix transmit power troubles on some Ralink RT30xx cardsAlex A. Mihaylov2013-04-221-2/+6
| | | | | | | | | | | | | | | | | | | Some cards on Ralink RT30xx chipset not have correctly TX_MIXER_GAIN value in them EEPROM/EFUSE. In this case, we must use default value, but always used EEPROM/EFUSE value. As result we have tranmitt power range from -10dBm to +6dBm instead 0dBm to +16dBm. Correctly value in EEPROM/EFUSE is one or more for RT3070 and two or more for other RT30xx chips. Tested on Canyon CNP-WF518N1 usb Wi-Fi dongle and Jorjin WN8020 usb embedded Wi-Fi module. Signed-off-by: Alex A. Mihaylov <minimumlaw@rambler.ru> Cc: stable@vger.kernel.org Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwl8k: remove nonstandard rate 72 MbpsJonas Gorski2013-04-221-6/+4
| | | | | | | | | | | | | | | This rate causes an overflow in the extended rates IE's data rate field, with the overflowing bit setting the Basic Rate Set membership. This results in a bogus 8 Mpbs basic rate, making clients checking them refuse association. Since the rate is likely unused anyway (HT will yield better rates between supporting chips), we can just remove it. This fixes association from wpa_supplicant and Android 4.x and newer. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'for-john' of ↵John W. Linville2013-04-2242-616/+1526
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
| * mac80211_hwsim: handle IEEE80211_HW_SUPPORTS_RC_TABLEKarl Beldan2013-04-221-1/+23
| | | | | | | | | | Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211/minstrel: use the new rate control APIFelix Fietkau2013-04-222-91/+111
| | | | | | | | | | | | | | | | | | Pass the rate selection table to mac80211 from minstrel_update_stats. Only rates for sample attempts are set in info->control.rates, with deferred sampling, only the second slot gets changed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211/minstrel_ht: use the new rate control APIFelix Fietkau2013-04-222-68/+84
| | | | | | | | | | | | | | | | Pass the rate selection table to mac80211 from minstrel_ht_update_stats. Only rates for sample attempts are set in info->control.rates. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: improve the rate control APIFelix Fietkau2013-04-224-167/+369
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow rate control modules to pass a rate selection table to mac80211 and the driver. This allows drivers to fetch the most recent rate selection from the sta pointer for already buffered frames. This allows rate control to respond faster to sudden link changes and it is also a step towards adding minstrel_ht support to drivers like iwlwifi. When a driver sets IEEE80211_HW_SUPPORTS_RC_TABLE, mac80211 will not fill info->control.rates with rates from the rate table (to preserve explicit overrides by the rate control module). The driver then explicitly calls ieee80211_get_tx_rates to merge overrides from info->control.rates with defaults from the sta rate table. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * cfg80211: introduce critical protocol indication from user-spaceArend van Spriel2013-04-227-1/+245
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some protocols need a more reliable connection to complete successful in reasonable time. This patch adds a user-space API to indicate the wireless driver that a critical protocol is about to commence and when it is done, using nl80211 primitives NL80211_CMD_CRIT_PROTOCOL_START and NL80211_CRIT_PROTOCOL_STOP. There can be only on critical protocol session started per registered cfg80211 device. The driver can support this by implementing the cfg80211 callbacks .crit_proto_start() and .crit_proto_stop(). Examples of protocols that can benefit from this are DHCP, EAPOL, APIPA. Exactly how the link can/should be made more reliable is up to the driver. Things to consider are avoid scanning, no multi-channel operations, and alter coexistence schemes. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: minstrel_ht: initialize rates selectionKarl Beldan2013-04-221-0/+3
| | | | | | | | | | | | | | | | Initialize {mp,mi}->{max_tp_rate,max_tp_rate2,max_prob_rate} in minstrel_ht's rate_init and rate_update. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: minstrel_ht: pick only supported rates for sta and group max*ratesKarl Beldan2013-04-221-6/+15
| | | | | | | | | | | | | | | | | | | | minstrel_ht initializes max_tp_rate max_tp_rate2 and max_prob_rate to zero both for minstrel_ht_sta and minstrel_mcs_group_data. This is wrong since there is no guarantee that the 1st rate of any group is supported. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * rfkill: fix error return code in rfkill_gpio_probe()Wei Yongjun2013-04-221-2/+5
| | | | | | | | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> [fix some indentation on the way] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: use synchronize_rcu() with rcu_barrier()Bob Copeland2013-04-223-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RCU docs used to state that rcu_barrier() included a wait for an RCU grace period; however the comments for rcu_barrier() as of commit f0a0e6f... "rcu: Clarify memory-ordering properties of grace-period primitives" contradict this. So add back synchronize_{rcu,net}() to where they once were, but keep the rcu_barrier()s for the call_rcu() callbacks. Cc: stable <stable@vger.kernel.org> Signed-off-by: Bob Copeland <bob@cozybit.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: indicate admission control in TX queue parametersAlexander Bondar2013-04-222-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Some driver implementations need to know whether mandatory admission control is required by the AP for some ACs. Add a parameter to the TX queue parameters indicating this. As there's currently no support for admission control in mac80211's AP implementation, it's only ever set for the client implementation. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * cfg80211: invert P2P-Device vs. netdev check orderingJohannes Berg2013-04-221-4/+4
| | | | | | | | | | | | | | | | | | | | In cfg80211_can_use_iftype_chan(), check for P2P Device first, and then for netdevs. This doesn't really change anything but makes the code a bit easier to read since it may not be obvious for everyone at first that a P2P device has no netdev. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * cfg80211: fix P2P-Device stop lockingJohannes Berg2013-04-221-0/+2
| | | | | | | | | | | | | | | | | | cfg80211_stop_p2p_device() requires the devlist_mtx to be held, but nl80211_stop_p2p_device() doesn't acquire it which is a locking error and causes a warning (when lockdep is enabled). Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg2013-04-22519-8266/+36452
| |\
| * | nl80211: allow using wdev identifiers to get scan resultsJohannes Berg2013-04-191-75/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most dump callbacks, including the scan results one, use the netdev to identify what to do, which is incorrect for the P2P_DEVICE support, it needs to be able to get the scan result from the wdev. Change all dumps to unify the code, but ones other than scan don't really support being executed on a wdev that has no netdev. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: fix P2P-Device management frame RXJohannes Berg2013-04-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's an issue in receiving broadcast management frames on P2P Device virtual interfaces, such frames have the RX flag IEEE80211_RX_RA_MATCH cleared and are thus dropped in ieee80211_rx_h_mgmt_check(). They should be let through to make it to ieee80211_rx_h_userspace_mgmt() and then to userspace. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: optimize minstrel_ewmaKarl Beldan2013-04-171-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use powers of two in ewma of minstrel. This changes : - EWMA_DIV from 100 to 2^7 - EWMA_LEVEL from 75 (/EWMA_DIV=100) to 2^6 + 2^5 (/EWMA_DIV=128) Note that this changes EWMA_DIV - EWMA_LEVEL from 25 to 2^5 and keeps EWMA_LEVEL / EWMA_DIV == 0.75. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: cosmetics for minstrel_debugfsKarl Beldan2013-04-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes the minstrel stats ouput from: rate throughput ewma prob this prob this succ/attempt success attempts BCD 6 0.0 0.0 0.0 0( 0) 0 0 to: rate throughput ewma prob this prob this succ/attempt success attempts BCD 6 0.0 0.0 0.0 0( 0) 0 0 Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: fix station entry leak/warning while suspendingJohannes Berg2013-04-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since Stanislaw's patches, when suspending while connected, cfg80211 will disconnect. This causes the AP station to be removed, which uses call_rcu() to clean up. Due to needing process context, this queues a work struct on the mac80211 workqueue. This will warn and fail when already suspended, which can happen if the rcu call doesn't happen quickly. To fix this, replace the synchronize_net() which is really just synchronize_rcu_expedited() with rcu_barrier(), which unlike synchronize_rcu() waits until RCU callback have run and thus avoids this issue. In theory, this can even happen without Stanislaw's change to disconnect on suspend since userspace might disconnect just before suspending, though then it's unlikely that the call_rcu() will be delayed long enough. Cc: stable@vger.kernel.org [3.7+] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: fix CTS protection handlingFelix Fietkau2013-04-163-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | The rates[0] CTS and RTS flags are only set after rate control has been called, so minstrel cannot use them to for setting the number of retries. This patch adds two new flags to explicitly indicate RTS/CTS use. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: fix and optimize MCS mask handlingFelix Fietkau2013-04-165-10/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the code always copies the configured MCS mask (even if it is set to default), but only uses it if legacy rates were also masked out. Fix this by adding a flag that tracks whether the configured MCS mask is set to default or not. Optimize the code further by storing a pointer to the configured rate mask in txrc instead of using memcpy. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211_hwsim: handle VHT rates in rx_statusKarl Beldan2013-04-161-3/+11
| | | | | | | | | | | | | | | Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: VHT off-by-one NSSKarl Beldan2013-04-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The number of VHT spatial streams (NSS) is found in: - s8 ieee80211_tx_rate.rate.idx[6:4] (tx - filled by rate control) - u8 ieee80211_rx_status.vht_nss (rx - filled by driver) Tx discriminates valid rates indexes with the sign bit and encodes NSS starting from 0 to 7 (note this matches some hw encodings e.g IWLMVM). Rx does not have the same constraints, and encodes NSS starting from 1 to 8 (note this matches what wireshark expects in the radiotap header). To handle ieee80211_tx_rate.rate.idx[6:4] ieee80211_rate_set_vht() and ieee80211_rate_get_vht_nss() assume their nss parameter and return value respectively runs from 0 to 7. ATM, there are only 2 users of these: cfg.c:sta_set_rate_info_t() and iwlwifi/mvm/tx.c:iwl_mvm_hwrate_to_tx_control(), but both assume nss runs from 1 to 8. This patch fixes this inconsistency by making ieee80211_rate_set_vht() and ieee80211_rate_get_vht_nss() handle an nss running from 1 to 8. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: adjust initial chandefs assignments in ieee80211_register_hwKarl Beldan2013-04-161-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that monitor interfaces by default would start on 5GHz while STA/AP ones would start 2GHZ - It stems from the fact that ieee80211_register_hw unnecessarily adjusts the local->monitor_chandef for each band. This avoids this and while at it uses a single dflt_chandef to initialize in one go local->{hw.conf.chandef,_oper_chandef,monitor_chandef} Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: fix rate control tx handler for VHT ratesKarl Beldan2013-04-161-14/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | Handle VHT rates like HT ones, otherwise we easily trigger the pre-HT rates WARN_ON(rc_rate->idx >= sband->n_bitrates) which will set rc_rate->idx to -1. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: remove warning from ieee80211_beacon_lossAlexander Bondar2013-04-161-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, mac80211 assumes that connection monitor offload for BSS station implies that the device: - sends periodic keep alive packets to associated AP - monitors missed beacons - actively probes the AP in case of missed beacons In case of poor connection conditions it expects the function ieee80211_connection_loss() to be called by driver. However, some devices implement connection monitor offload excluding active AP probing. To allow them to call ieee80211_beacon_loss() cleanly, remove the warning there and thus allow them to use mac80211 for the AP probing even if connection monitor offload is supported. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: handle wide bandwidth channel switchJohannes Berg2013-04-161-17/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Parse and react to the wide bandwidth channel switch element in beacons/action frames. Finding the element was done in a previous patch (it has different positions in beacons/action frames), now handle it. If there's something wrong with it simply disconnect. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: parse VHT channel switch IEsJohannes Berg2013-04-169-18/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VHT introduces multiple IEs that need to be parsed for a wide bandwidth channel switch. Two are (currently) needed in mac80211: * wide bandwidth channel switch element * channel switch wrapper element The former is contained in the latter for beacons and probe responses, but not for the spectrum management action frames so the IE parser needs a new argument to differentiate them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: handle extended channel switch announcementJohannes Berg2013-04-163-4/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | Handle the (public) extended channel switch announcement action frames. Parts of the data in these frames isn't really in IEs, but put it into the elems struct anyway to simplify the handling. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: support secondary channel offset in CSAJohannes Berg2013-04-1613-54/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the secondary channel offset IE in channel switch announcements. This is necessary for proper handling of CSA on HT access points. For this to work it is also necessary to convert everything here to use chandef structs instead of just channels. The driver updates aren't really correct though. In particular, the TI wl18xx driver update can't possibly be right since it just ignores the new channel width for lack of firmware API. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: support extended channel switchJohannes Berg2013-04-164-26/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | Support extended channel switch when the operating class is one of the global operating classes as defined in Annex E of 802.11-2012. If it isn't, disconnect from the AP instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | cfg80211: add ieee80211_operating_class_to_bandJohannes Berg2013-04-162-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | This function converts a (global only!) operating class to an internal band identifier. This will be needed for extended channel switch support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: unify CSA action frame/beacon processingJohannes Berg2013-04-164-39/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | CSA action frame content should be processed as variable IEs rather than fixed to make it extensible. Unify the code and process them just like CSA in beacons to make it easier to extend for HT/VHT. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: use second center_freq segment only in 80+80Johannes Berg2013-04-161-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | The field is otherwise reserved, so we shouldn't read and reject it, though any sane system will probably have to set it to 0 anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wireless: regulatory: fix channel disabling race conditionJohannes Berg2013-04-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a full scan 2.4 and 5 GHz scan is scheduled, but then the 2.4 GHz part of the scan disables a 5.2 GHz channel due to, e.g. receiving country or frequency information, that 5.2 GHz channel might already be in the list of channels to scan next. Then, when the driver checks if it should do a passive scan, that will return false and attempt an active scan. This is not only wrong but can also lead to the iwlwifi device firmware crashing since it checks regulatory as well. Fix this by not setting the channel flags to just disabled but rather OR'ing in the disabled flag. That way, even if the race happens, the channel will be scanned passively which is still (mostly) correct. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: always pick a basic rate to tx RTS/CTS for pre-HT ratesKarl Beldan2013-04-111-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the 1st rate control entry is a pre-HT rate we want to set rts_cts_rate_idx "as the fastest basic rate that is not faster than the data rate"(code comments). But in case some bss allowed rate indexes are lower than the lowest bss basic rate, if the rate control selects a rate among the formers for its 1st rate control entry, rts_cts_rate_idx remains 0 and is not a basic rate index. This commit sets rts_cts_rate_idx to the lowest bss basic rate index in this situation. Note that the code assumes that lowest indexes == lowest bitrates. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: fix ieee80211_queue_stopped()Thomas Pedersen2013-04-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Johannes Berg notes mac80211 drivers which use ieee80211_queue_stopped() really only want to know if they previously requested a queue stop. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: provide SSID in IBSS modeMarek Puzyniak2013-04-102-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some drivers need SSID in AP and IBSS mode. AP SSID is provided through BSS_CHANGED_SSID notification. There was no easy way to do the same for IBSS. In IBSS mode SSID is known but was not stored in BSS configuration. Extend the AP-mode functionality to also work in IBSS mode. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: always advertise STBC/MCSes even if no AP supportJohannes Berg2013-04-101-32/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Advertise STBC capabilities and MCS rates even if the AP doesn't support them. This has always been the right thing to do, but used to be problematic with some APs. Now WFA testing requires this so re-enable it, problematic APs would then presumably not pass the test and be fixed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: clear SSID when stopping APMarek Puzyniak2013-04-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | When AP interface is stopped ssid_len in the BSS configuration isn't cleared which can confuse drivers when switching modes. Set the length to zero when stopping the AP interface. Signed-off-by: Marek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: fix recalc_radar hwconf sync problemSimon Wunderlich2013-04-101-10/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | local->hw.conf maybe not be synced when recalcing whether radar is enabled, sometimes leaving radar enabled even if it's not neccesary anymore. Fix this by: * setting radar_enabled when creating the chanctx * turning radar_enabled off before destroying the last channel context Reported-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: stringify another plink stateThomas Pedersen2013-04-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The patch "mac80211: stringify mesh peering events" missed an opportunity to print the peering state as a string. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211: unset FC retry bit in mesh fwding pathThomas Pedersen2013-04-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Otherwise forwarded frames would keep the retry bit set from the previous link transmission. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | mac80211_hwsim: Register and bind to driverMartin Pitt2013-04-101-5/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Properly register our mac80211_hwsim_driver, attach it to the platform bus. Bind newly created hwsim devices to that driver, so that our wlan devices get a proper "driver" sysfs attribute. This makes mac80211_hwsim interfaces work with NetworkManager. Signed-off-by: Martin Pitt <martin.pitt@ubuntu.com> [fix an old and a new message to not be line-broken, also fix the driver_register error path] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | | Merge branch 'for-upstream' of ↵John W. Linville2013-04-2220-735/+1213
|\ \ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
| * | | Bluetooth: Rename LE_SCANNING_* macrosAndre Guedes2013-04-183-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames LE_SCANNING_ENABLED and LE_SCANNING_DISABLED macros to LE_SCAN_ENABLE and LE_SCAN_DISABLE in order to keep the same prefix others LE scan macros have. It also fixes le_scan_enable_req function so it uses the LE_SCAN_ ENABLE macro instead of a magic number. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
| * | | Bluetooth: Add macros for filter duplicates valuesAndre Guedes2013-04-182-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds macros for filter_duplicates parameter values from HCI LE Set Scan Enable command. It also fixes le_scan_enable_req function so it uses the LE_SCAN_FILTER_DUP_ENABLE macro instead of a magic number. The LE_SCAN_FILTER_DUP_DISABLE was also defined since it will be required to properly support the GAP Observer Role. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
| * | | Bluetooth: Add LE scan type macrosAndre Guedes2013-04-182-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds macros for active and passive LE scan type values. The LE_SCAN_PASSIVE was also defined since it will be used in future by LE connection routine and GAP Observer Role support. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 15:17:19 +0100