summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: support DTPC IE (from Cisco Client eXtensions)Steinar H. Gunderson2014-09-084-12/+77
| | | | | | | | | | | | | | | | | | | | | | | | Linux already supports 802.11h, where the access point can tell the client to reduce its transmission power. However, 802.11h is only defined for 5 GHz, where the need for this is much smaller than on 2.4 GHz. Cisco has their own solution, called DTPC (Dynamic Transmit Power Control). Cisco APs on a controller sometimes but not always send 802.11h; they always send DTPC, even on 2.4 GHz. This patch adds support for parsing and honoring the DTPC IE in addition to the 802.11h element (they do not always contain the same limits, so both must be honored); the format is not documented, but very simple. Tested (on top of wireless.git and on 3.16.1) against a Cisco Aironet 1142 joined to a Cisco 2504 WLC, by setting various transmit power levels for the given access points and observing the results. The Wireshark 802.11 dissector agrees with the interpretation of the element, except for negative numbers, which seem to never happen anyway. Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
* mac80211: split 802.11h parsing from transmit power policySteinar H. Gunderson2014-09-081-19/+41
| | | | | | | | | | Decouple the logic of parsing the 802.11d and 802.11h IEs from the part of deciding what to do about the data (messaging, clamping to 0 dBm, doing the actual setting). This paves the way for the next patch, which introduces more data sources for transmit power limitation. Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix broken use of VHT/20Mhz with some APsEyal Shapira2014-09-051-1/+1
| | | | | | | | | | | | | | | | | commit "mac80211: disable 40MHz support in case of 20MHz AP" broke working VHT in 20Mhz with APs like Netgear R6300v2 which do not publish support for 40Mhz but allow use of VHT in 20Mhz. The break is because VHT is disabled once no HT cap doesn't indicate support for 40Mhz. This causes the assoc request to be sent without any VHT IE and the association is only HT due to this. For more details check out commit 4a817aa7 "mac80211: allow VHT with peers not capable of 40MHz" Fixes: 53b954ee4a71 ("mac80211: disable 40MHz support in case of 20MHz AP") Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: extend set_coverage_class signatureLorenzo Bianconi2014-09-058-11/+20
| | | | | | | | | | Extend mac80211 set_coverage_class API in order to enable ACK timeout estimation algorithm (dynack) passing coverage class equals to -1 to lower drivers. Synchronize set_coverage_class routine signature with mac80211 function pointer for p54, ath9k, ath9k_htc and ath5k drivers. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: enable dynack through nl80211Lorenzo Bianconi2014-09-053-0/+25
| | | | | | | | | | | | | Enable ACK timeout estimation algorithm (dynack) using mac80211 set_coverage_class API. Dynack is activated passing coverage class equals to -1 to lower drivers and it is automatically disabled setting valid value for coverage class. Define NL80211_ATTR_WIPHY_DYN_ACK flag attribute to enable dynack from userspace. In order to activate dynack NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower drivers to indicate dynack capability. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: combine roc with the "next roc" if possibleEliad Peller2014-09-051-24/+53
| | | | | | | | | | | | | | | | | | | If the remaining time in the current roc is not long enough, mac80211 adds the new roc right after it (if they have similar params). However, in case of multiple rocs, the "next roc" is not considered, resulting in multiple rocs, each one with its own duration. Refactor the code a bit and consider the next roc, so a single max roc will be used instead of multiple rocs (which might last much longer). Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: adjust roc duration when combining ROCsEliad Peller2014-09-051-0/+1
| | | | | | | | | | | The new duration (remaining duration after the current ROC ends) was calculated but not used, making the optimization worthless. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: avoid duplicate entries on regdomain intersectionEliad Peller2014-09-051-21/+60
| | | | | | | | | | | | | | | | | The regdom intersection code simply tries intersecting each rule of the source with each rule of the target. Since the resulting intersections are not observed as a whole, this can result in multiple overlapping/duplicate entries. Make the rule addition a bit more smarter, by looking for rules that can be contained within other rules, and adding only extended ones. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Add RRM support to assoc requestAssaf Krauss2014-09-052-3/+13
| | | | | | | | | In case of a RRM-supporting connection, in the association request frame: set the RRM capability flag, and add the required IEs. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: Add flag attribute for RRM connectionsAssaf Krauss2014-09-053-0/+32
| | | | | | | | | | | | Add a flag attribute to use in associations, for tagging the target connection as supporting RRM. It is the responsibility of upper layers to set this flag only if both the underlying device, and the target network indeed support RRM. To be used in ASSOCIATE and CONNECT commands. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* nl80211: Allow declaring RRM-related featuresAssaf Krauss2014-09-051-0/+14
| | | | | | | | | | | | | | | | | | Radio Resource Measurement (RRM) is a bundle of features which will require the entire stack to participate. In this patch, the driver is given the opportunity to advertise the device's support for these RRM-related features, using feature flags: 1. Support for Quiet IEs. 2. Support for adding DS Parameter Set IE to probe requests. 3. Support for adding WFA TPC Report IE to probe requests. 4. Support for inserting tx power value to tx-ed packets at a fixed offset. This is used in action frames, such as RRM's Link Measurement Report, where the actual tx power should be reported in the frame. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix description comment of ieee80211_subif_start_xmitLiad Kaufman2014-09-051-3/+2
| | | | | | | | | | The function description claimed that on error the skb isn't freed even though it is, and stated return values that are different than what really happens in the code. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: add Intel Mobile Communications copyrightJohannes Berg2014-09-058-0/+8
| | | | | | | | | | | | | Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: add Intel Mobile Communications copyrightJohannes Berg2014-09-0519-0/+19
| | | | | | | | | | | | | Our legal structure changed at some point (see wikipedia), but we forgot to immediately switch over to the new copyright notice. For files that we have modified in the time since the change, add the proper copyright notice now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: clean up ieee80211_i.hJohannes Berg2014-09-051-2/+1
| | | | | | | | Not sure how the declaration of ieee80211_tdls_peer_del_work landed after the double inclusion protection end. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix offloaded BA session traffic after hw restartMichal Kazior2014-09-035-14/+20
| | | | | | | | | | | | | | | | | | | | | | When starting an offloaded BA session it is unknown what starting sequence number should be used. Using last_seq worked in most cases except after hw restart. When hw restart is requested last_seq is (rightfully so) kept unmodified. This ended up with BA sessions being restarted with an aribtrary BA window values resulting in dropped frames until sequence numbers caught up. Instead of last_seq pick seqno of a first Rxed frame of a given BA session. This fixes stalled traffic after hw restart with offloaded BA sessions (currently only ath10k). Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* net: rfkill: gpio: Add more Broadcom bluetooth ACPI IDsMika Westerberg2014-08-291-0/+1
| | | | | | | This adds one more ACPI ID of a Broadcom bluetooth chip. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: fix chantype recalc warningMichal Kazior2014-08-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a device driver is unloaded local->interfaces list is cleared. If there was more than 1 interface running and connected (bound to a chanctx) then chantype recalc was called and it ended up with compat being NULL causing a call trace warning. Warn if compat becomes NULL as a result of incompatible bss_conf.chandef of interfaces bound to a given channel context only. The call trace looked like this: WARNING: CPU: 2 PID: 2594 at /devel/src/linux/net/mac80211/chan.c:557 ieee80211_recalc_chanctx_chantype+0x2cd/0x2e0() Modules linked in: ath10k_pci(-) ath10k_core ath CPU: 2 PID: 2594 Comm: rmmod Tainted: G W 3.16.0-rc1+ #150 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 0000000000000009 ffff88001ea279c0 ffffffff818dfa93 0000000000000000 ffff88001ea279f8 ffffffff810514a8 ffff88001ce09cd0 ffff88001e03cc58 0000000000000000 ffff88001ce08840 ffff88001ce09cd0 ffff88001ea27a08 Call Trace: [<ffffffff818dfa93>] dump_stack+0x4d/0x66 [<ffffffff810514a8>] warn_slowpath_common+0x78/0xa0 [<ffffffff81051585>] warn_slowpath_null+0x15/0x20 [<ffffffff818a407d>] ieee80211_recalc_chanctx_chantype+0x2cd/0x2e0 [<ffffffff818a3dda>] ? ieee80211_recalc_chanctx_chantype+0x2a/0x2e0 [<ffffffff818a4919>] ieee80211_assign_vif_chanctx+0x1a9/0x770 [<ffffffff818a6220>] __ieee80211_vif_release_channel+0x70/0x130 [<ffffffff818a6dd3>] ieee80211_vif_release_channel+0x43/0xb0 [<ffffffff81885f4e>] ieee80211_stop_ap+0x21e/0x5a0 [<ffffffff8184b9b5>] __cfg80211_stop_ap+0x85/0x520 [<ffffffff8181c188>] __cfg80211_leave+0x68/0x120 [<ffffffff8181c268>] cfg80211_leave+0x28/0x40 [<ffffffff8181c5f3>] cfg80211_netdev_notifier_call+0x373/0x6b0 [<ffffffff8107f965>] notifier_call_chain+0x55/0x110 [<ffffffff8107fa41>] raw_notifier_call_chain+0x11/0x20 [<ffffffff816a8dc0>] call_netdevice_notifiers_info+0x30/0x60 [<ffffffff816a8eb9>] __dev_close_many+0x59/0xf0 [<ffffffff816a9021>] dev_close_many+0x81/0x120 [<ffffffff816aa1c5>] rollback_registered_many+0x115/0x2a0 [<ffffffff816aa3a6>] unregister_netdevice_many+0x16/0xa0 [<ffffffff8187d841>] ieee80211_remove_interfaces+0x121/0x1b0 [<ffffffff8185e0e6>] ieee80211_unregister_hw+0x56/0x110 [<ffffffffa0011ac4>] ath10k_mac_unregister+0x14/0x60 [ath10k_core] [<ffffffffa0014fe7>] ath10k_core_unregister+0x27/0x40 [ath10k_core] [<ffffffffa003b1f4>] ath10k_pci_remove+0x44/0xa0 [ath10k_pci] [<ffffffff81373138>] pci_device_remove+0x28/0x60 [<ffffffff814cb534>] __device_release_driver+0x64/0xd0 [<ffffffff814cbcc8>] driver_detach+0xb8/0xc0 [<ffffffff814cb23a>] bus_remove_driver+0x4a/0xb0 [<ffffffff814cc697>] driver_unregister+0x27/0x50 Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Replace rcu_dereference() with rcu_access_pointer()Andreea-Cristina Bernat2014-08-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "rcu_dereference()" calls are used directly in conditions. Since their return values are never dereferenced it is recommended to use "rcu_access_pointer()" instead of "rcu_dereference()". Therefore, this patch makes the replacements. The following Coccinelle semantic patch was used: @@ @@ ( if( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} | while( (<+... - rcu_dereference + rcu_access_pointer (...) ...+>)) {...} ) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: scan: Replace rcu_assign_pointer() with RCU_INIT_POINTER()Andreea-Cristina Bernat2014-08-261-1/+1
| | | | | | | | | | | | | | | | | | | The use of "rcu_assign_pointer()" is NULLing out the pointer. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: allow passing frame type to cfg80211_inform_bss()Johannes Berg2014-08-2613-58/+77
| | | | | | | | | | | | | When using the cfg80211_inform_bss[_width]() functions drivers cannot currently indicate whether the data was received in a beacon or probe response. Fix that by passing a new enum that indicates such (or unknown). For good measure, use it in ath6kl. Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> [ath6kl] Acked-by: Arend van Spriel <arend@broadcom.com> [brcmfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: clarify BSS probe response vs. beacon dataJohannes Berg2014-08-264-8/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a few possible cases of where BSS data came from: 1) only a beacon has been received 2) only a probe response has been received 3) the driver didn't report what it received (this happens when using cfg80211_inform_bss[_width]()) 4) both probe response and beacon data has been received Unfortunately, in the userspace API, a few things weren't there: a) there was no way to differentiate cases 1) and 4) above without comparing the data of the IEs b) the TSF was always from the last frame, instead of being exposed for beacon/probe response separately like IEs Fix this by i) exporting a new flag attribute that indicates whether or not probe response data has been received - this addresses (a) ii) exporting a BEACON_TSF attribute that holds the beacon's TSF if a beacon has been received iii) not exporting the beacon attributes in case (3) above as that would just lead userspace into thinking the data actually came from a beacon when that isn't clear To implement this, track inside the IEs struct whether or not it (definitely) came from a beacon. Reported-by: William Seto Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: re-enable CSA for drivers that support itMichal Kazior2014-08-261-6/+0
| | | | | | | | | | | This reverts commit dda444d52496aa8ddc501561bca580f1374a96a9. Channel switching code has been reworked and improved significantly since the time original locking issues were found. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: don't resize skbs needlesslyIdo Yariv2014-08-262-2/+8
| | | | | | | | | | | | | | | | Header-less cloned skbs with sufficient headroom need not be cloned unless the tailroom is going to be modified. Fix ieee80211_skb_resize so it would only resize cloned skbs if either the header isn't released or the tailroom is going to be modified. Some drivers might have assumed that skbs are never cloned, so add a HW flag that explicitly permits cloned TX skbs. Drivers which do not modify TX skbs should set this flag to avoid copying skbs. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: Fix accounting of the tailroom-needed counterIdo Yariv2014-08-262-11/+8
| | | | | | | | | | When hw acceleration is enabled, the GENERATE_IV or PUT_IV_SPACE flags will only require headroom space. Consequently, the tailroom-needed counter can safely be decremented. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* ieee80211: Support parsing TPC report element in action framesAndrei Otcheretianski2014-08-261-0/+65
| | | | | | | | | | | | TPC report element is contained in spectrum management's tpc report action frames and in radio measurement's link measurement report action frames. Add a function which checks whether an action frame contains this element. This may be needed by the drivers in order to set the correct tx power value in these frames. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* cfg80211: remove @gfp parameter from cfg80211_rx_mgmt()Vladimir Kondratiev2014-08-269-17/+13
| | | | | | | | | | | | | | In the cfg80211_rx_mgmt(), parameter @gfp was used for the memory allocation. But, memory get allocated under spin_lock_bh(), this implies atomic context. So, one can't use GFP_KERNEL, only variants with no __GFP_WAIT. Actually, in all occurrences GFP_ATOMIC is used (wil6210 use GFP_KERNEL by mistake), and it should be this way or warning triggered in the memory allocation code. Remove @gfp parameter as no actual choice exist, and use hard coded GFP_ATOMIC for memory allocation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: make ieee80211_vif_use_reserved_switch staticJohannes Berg2014-08-262-95/+93
| | | | | | | Reorder some code to make ieee80211_vif_use_reserved_switch() static, no other changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: mesh_plink: use get_unaligned_le16 instead of memcpyBob Copeland2014-08-261-7/+3
| | | | | | | Use get_unaligned_le16 to access llid/plid. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: disable 40MHz support in case of 20MHz APEliad Peller2014-08-151-8/+22
| | | | | | | | | | | | | If the AP only advertises support for 20MHz (in the ht operation ie), disable 40MHz and VHT. This can improve interoperability with APs that don't like stations exceeding their own advertised capabilities. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* mac80211: don't duplicate station QoS capability dataJohannes Berg2014-08-1511-29/+17
| | | | | | | | | | | | | We currently track the QoS capability twice: for all peer stations in the WLAN_STA_WME flag, and for any clients associated to an AP interface separately for drivers in the sta->sta.wme field. Remove the WLAN_STA_WME flag and track the capability only in the driver-visible field, getting rid of the limitation that the field is only valid in AP mode. Reviewed-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Merge tag 'pm+acpi-3.17-rc1-2' of ↵Linus Torvalds2014-08-1515-878/+3051
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are a couple of regression fixes, cpuidle menu governor optimizations, fixes for ACPI proccessor and battery drivers, hibernation fix to avoid problems related to the e820 memory map, fixes for a few cpufreq drivers and a new version of the suspend profiling tool analyze_suspend.py. Specifics: - Fix for an ACPI-based device hotplug regression introduced in 3.14 that causes a kernel panic to trigger when memory hot-remove is attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen - Fix for a cpufreq regression introduced in 3.16 that triggers a "sleeping function called from invalid context" bug in dev_pm_opp_init_cpufreq_table() from Stephen Boyd - ACPI battery driver fix for a warning message added in 3.16 that prints silly stuff sometimes from Mariusz Ceier - Hibernation fix for safer handling of mismatches in the 820 memory map between the configurations during image creation and during the subsequent restore from Chun-Yi Lee - ACPI processor driver fix to handle CPU hotplug notifications correctly during system suspend/resume from Lan Tianyu - Series of four cpuidle menu governor cleanups that also should speed it up a bit from Mel Gorman - Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus Pargmann and Uwe Kleine-König - Version 3.0 of the analyze_suspend.py suspend profiling tool from Todd E Brandt" * tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / battery: Fix warning message in acpi_battery_get_state() PM / tools: analyze_suspend.py: update to v3.0 cpufreq: arm_big_little: fix module license spec cpufreq: speedstep-smi: fix decimal printf specifiers ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove() cpufreq: OPP: Avoid sleeping while atomic cpufreq: cpu0: Do not print error message when deferring cpufreq: integrator: Use set_cpus_allowed_ptr PM / hibernate: avoid unsafe pages in e820 reserved regions ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events cpuidle: menu: Lookup CPU runqueues less cpuidle: menu: Call nr_iowait_cpu less times cpuidle: menu: Use ktime_to_us instead of reinventing the wheel cpuidle: menu: Use shifts when calculating averages where possible
| * Merge branch 'pm-tools'Rafael J. Wysocki2014-08-111-836/+2981
| |\ | | | | | | | | | | | | * pm-tools: PM / tools: analyze_suspend.py: update to v3.0
| | * PM / tools: analyze_suspend.py: update to v3.0Todd E Brandt2014-08-091-836/+2981
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update of analyze_suspend.py to v3.0 New features include back-2-back suspend testing, device filters to reduce the html size, the inclusion of device_prepare and device_complete callbacks, a usb topography list, and the ability to control USB device autosuspend. UI upgrades include a device detail window and mini-timeline, the addition of a suspend_prepare and resume_complete phase to the timeline which includes the associated device callbacks, automatic highlight of related callbacks, and general color and name changes for better reability. The new version relies on two trace point patches that are already in the kernel: enable_trace_events_suspend_resume.patch enable_trace_events_device_pm_callback.patch It has legacy support for older kernels without these trace events, but when available the tool processes the ftrace output alone (dmesg has been deprecated as a tool input, and is only gathered for convenience). Link: https://01.org/suspendresume/downloads/analyzesuspend-v3.0 Signed-off-by: Todd Brandt <todd.e.brandt@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | |
| | \
| | \
| | \
| *---. \ Merge branches 'pm-sleep', 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki2014-08-1111-40/+66
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pm-sleep: PM / hibernate: avoid unsafe pages in e820 reserved regions * pm-cpufreq: cpufreq: arm_big_little: fix module license spec cpufreq: speedstep-smi: fix decimal printf specifiers cpufreq: OPP: Avoid sleeping while atomic cpufreq: cpu0: Do not print error message when deferring cpufreq: integrator: Use set_cpus_allowed_ptr * pm-cpuidle: cpuidle: menu: Lookup CPU runqueues less cpuidle: menu: Call nr_iowait_cpu less times cpuidle: menu: Use ktime_to_us instead of reinventing the wheel cpuidle: menu: Use shifts when calculating averages where possible
| | | | * | cpuidle: menu: Lookup CPU runqueues lessMel Gorman2014-08-064-19/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The menu governer makes separate lookups of the CPU runqueue to get load and number of IO waiters but it can be done with a single lookup. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | | | * | cpuidle: menu: Call nr_iowait_cpu less timesMel Gorman2014-08-061-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | menu_select() via inline functions calls nr_iowait_cpu() twice as much as necessary. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | | | * | cpuidle: menu: Use ktime_to_us instead of reinventing the wheelMel Gorman2014-08-061-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ktime_to_us implementation is slightly better than the one implemented in menu.c. Use it Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | | | * | cpuidle: menu: Use shifts when calculating averages where possibleMel Gorman2014-08-061-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We use do_div even though the divisor will usually be a power-of-two unless there are unusual outliers. Use shifts where possible Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | | * | | cpufreq: arm_big_little: fix module license specUwe Kleine-König2014-08-092-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Having no license specification in a module taints the kernel during load with: arm_big_little: module license 'unspecified' taints kernel. and also the linker doesn't allow it to make use of GPL-exported symbols which in this case also results in errors like: arm_big_little: Unknown symbol cpufreq_register_driver (err 0) . The header of the driver specifies a GPL v2 license, so note that accordingly. While at it also add a description and an author and fix the license in a companion file to explicit v2. Reported-by: Andreas Schwab <schwab@suse.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | | * | | cpufreq: speedstep-smi: fix decimal printf specifiersHans Wennborg2014-08-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The prefix suggests the number should be printed in hex, so use the %x specifier to do that. Also, these are 32-bit values, so drop the l characters. Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | | * | | cpufreq: OPP: Avoid sleeping while atomicStephen Boyd2014-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We allocate the cpufreq table after calling rcu_read_lock(), which disables preemption. This causes scheduling while atomic warnings. Use GFP_ATOMIC instead of GFP_KERNEL and update for kcalloc while we're here. BUG: sleeping function called from invalid context at mm/slub.c:1246 in_atomic(): 0, irqs_disabled(): 0, pid: 80, name: modprobe 5 locks held by modprobe/80: #0: (&dev->mutex){......}, at: [<c050d484>] __driver_attach+0x48/0x98 #1: (&dev->mutex){......}, at: [<c050d494>] __driver_attach+0x58/0x98 #2: (subsys mutex#5){+.+.+.}, at: [<c050c114>] subsys_interface_register+0x38/0xc8 #3: (cpufreq_rwsem){.+.+.+}, at: [<c05a9c8c>] __cpufreq_add_dev.isra.22+0x84/0x92c #4: (rcu_read_lock){......}, at: [<c05ab24c>] dev_pm_opp_init_cpufreq_table+0x18/0x10c Preemption disabled at:[< (null)>] (null) CPU: 2 PID: 80 Comm: modprobe Not tainted 3.16.0-rc3-next-20140701-00035-g286857f216aa-dirty #217 [<c0214da8>] (unwind_backtrace) from [<c02123f8>] (show_stack+0x10/0x14) [<c02123f8>] (show_stack) from [<c070141c>] (dump_stack+0x70/0xbc) [<c070141c>] (dump_stack) from [<c02f4cb0>] (__kmalloc+0x124/0x250) [<c02f4cb0>] (__kmalloc) from [<c05ab270>] (dev_pm_opp_init_cpufreq_table+0x3c/0x10c) [<c05ab270>] (dev_pm_opp_init_cpufreq_table) from [<bf000508>] (cpufreq_init+0x48/0x378 [cpufreq_generic]) [<bf000508>] (cpufreq_init [cpufreq_generic]) from [<c05a9e08>] (__cpufreq_add_dev.isra.22+0x200/0x92c) [<c05a9e08>] (__cpufreq_add_dev.isra.22) from [<c050c160>] (subsys_interface_register+0x84/0xc8) [<c050c160>] (subsys_interface_register) from [<c05a9494>] (cpufreq_register_driver+0x108/0x2d8) [<c05a9494>] (cpufreq_register_driver) from [<bf000888>] (generic_cpufreq_probe+0x50/0x74 [cpufreq_generic]) [<bf000888>] (generic_cpufreq_probe [cpufreq_generic]) from [<c050e994>] (platform_drv_probe+0x18/0x48) [<c050e994>] (platform_drv_probe) from [<c050d1f4>] (driver_probe_device+0x128/0x370) [<c050d1f4>] (driver_probe_device) from [<c050d4d0>] (__driver_attach+0x94/0x98) [<c050d4d0>] (__driver_attach) from [<c050b778>] (bus_for_each_dev+0x54/0x88) [<c050b778>] (bus_for_each_dev) from [<c050c894>] (bus_add_driver+0xe8/0x204) [<c050c894>] (bus_add_driver) from [<c050dd48>] (driver_register+0x78/0xf4) [<c050dd48>] (driver_register) from [<c0208870>] (do_one_initcall+0xac/0x1d8) [<c0208870>] (do_one_initcall) from [<c028b6b4>] (load_module+0x190c/0x21e8) [<c028b6b4>] (load_module) from [<c028c034>] (SyS_init_module+0xa4/0x110) [<c028c034>] (SyS_init_module) from [<c020f0c0>] (ret_fast_syscall+0x0/0x48) Fixes: a0dd7b79657b (PM / OPP: Move cpufreq specific OPP functions out of generic OPP library) Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | | * | | cpufreq: cpu0: Do not print error message when deferringMarkus Pargmann2014-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | -EPROBE_DEFER is no real error. We are just waiting unti the necessary components are ready. The driver core infrastructure will also print an appropriate info message. This patch changes the error message to a debug message. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | | * | | cpufreq: integrator: Use set_cpus_allowed_ptrHimangi Saraogi2014-08-071-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several years ago there was an effort to convert all uses of set_cpus_allowed to use set_cpus_allowed_ptr with the goal of eventually removing the current definition of set_cpus_allowed and renaming set_cpus_allowed_ptr as set_cpus_allowed (https://lkml.org/lkml/2010/3/26/59). This is another step in this direction. The Coccinelle semantic patch that makes this change is as follows: // <smpl> @@ expression E1,E2; @@ - set_cpus_allowed(E1, cpumask_of_cpu(E2)) + set_cpus_allowed_ptr(E1, cpumask_of(E2)) @@ expression E; identifier I; @@ - set_cpus_allowed(E, I) + set_cpus_allowed_ptr(E, &I) // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | | | PM / hibernate: avoid unsafe pages in e820 reserved regionsLee, Chun-Yi2014-08-061-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the machine doesn't well handle the e820 persistent when hibernate resuming, then it may cause page fault when writing image to snapshot buffer: [ 17.929495] BUG: unable to handle kernel paging request at ffff880069d4f000 [ 17.933469] IP: [<ffffffff810a1cf0>] load_image_lzo+0x810/0xe40 [ 17.933469] PGD 2194067 PUD 77ffff067 PMD 2197067 PTE 0 [ 17.933469] Oops: 0002 [#1] SMP ... The ffff880069d4f000 page is in e820 reserved region of resume boot kernel: [ 0.000000] BIOS-e820: [mem 0x0000000069d4f000-0x0000000069e12fff] reserved ... [ 0.000000] PM: Registered nosave memory: [mem 0x69d4f000-0x69e12fff] So snapshot.c mark the pfn to forbidden pages map. But, this page is also in the memory bitmap in snapshot image because it's an original page used by image kernel, so it will also mark as an unsafe(free) page in prepare_image(). That means the page in e820 when resuming mark as "forbidden" and "free", it causes get_buffer() treat it as an allocated unsafe page. Then snapshot_write_next() return this page to load_image, load_image writing content to this address, but this page didn't really allocated . So, we got page fault. Although the root cause is from BIOS, I think aggressive check and significant message in kernel will better then a page fault for issue tracking, especially when serial console unavailable. This patch adds code in mark_unsafe_pages() for check does free pages in nosave region. If so, then it print message and return fault to stop whole S4 resume process: [ 8.166004] PM: Image loading progress: 0% [ 8.658717] PM: 0x6796c000 in e820 nosave region: [mem 0x6796c000-0x6796cfff] [ 8.918737] PM: Read 2511940 kbytes in 1.04 seconds (2415.32 MB/s) [ 8.926633] PM: Error -14 resuming [ 8.933534] PM: Failed to load hibernation image, recovering. Reviewed-by: Takashi Iwai <tiwai@suse.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | | | | |
| | \ \ \ \
| | \ \ \ \
| | \ \ \ \
| *---. \ \ \ \ Merge branches 'acpi-processor', 'acpi-hotplug' and 'acpi-battery'Rafael J. Wysocki2014-08-103-2/+4
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * acpi-processor: ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events * acpi-hotplug: ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove() * acpi-battery: ACPI / battery: Fix warning message in acpi_battery_get_state()
| | | | * | | | | ACPI / battery: Fix warning message in acpi_battery_get_state()Mariusz Ceier2014-08-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | capacity_now should be assigned after comparing it to design_capacity. Otherwise warning is printed even when capacity_now before assignment is equal to design_capacity, making the check useless and "current charge level" wrong (it should be higher than, not equal to, "maximum charge level", which is full_charge_capacity): "battery: reported current charge level (56410) is higher than reported maximum charge level (56410)." Fixes: 232de5143790 (ACPI / battery: fix wrong value of capacity_now reported when fully charged) Signed-off-by: Mariusz Ceier <mceier+kernel@gmail.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | | * | | | | | ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()Tang Chen2014-08-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ACPI_HOTPLUG_MEMORY is not configured, memory_device_handler.attach is not set. In acpi_scan_attach_handler(), the acpi_device->handler will not be initialized. In acpi_scan_hot_remove(), it doesn't check if acpi_device->handler is NULL. If we do memory hot-remove without ACPI_HOTPLUG_MEMORY configured, the kernel will panic. BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4 PGD 0 Oops: 0000 [#1] SMP Modules linked in: sd_mod(E) sr_mod(E) cdrom(E) crc_t10dif(E) crct10dif_common(E) ata_piix(E) libata(E) CPU: 0 PID: 41 Comm: kworker/u2:1 Tainted: G E 3.16.0-rc7--3.16-rc7-tangchen+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Workqueue: kacpi_hotplug acpi_hotplug_work_fn task: ffff8800182436c0 ti: ffff880018254000 task.ti: ffff880018254000 RIP: 0010:[<ffffffff813e318f>] [<ffffffff813e318f>] acpi_device_hotplug+0x1d7/0x4c4 RSP: 0000:ffff880018257da8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff88001cd8d800 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88001e40e6f8 RDI: 0000000000000246 RBP: ffff880018257df0 R08: 0000000000000096 R09: 00000000000011a0 R10: 63735f6970636120 R11: 725f746f685f6e61 R12: 0000000000000003 R13: ffff88001cc1c400 R14: ffff88001e062028 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff88001e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000088 CR3: 000000001a9a2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Stack: 00000000523cab58 ffff88001cd8d9f8 ffff88001852d480 00000000523cab58 ffff88001852d480 ffff880018221e40 ffff88001cc1c400 ffff88001cce2d00 0000000000000040 ffff880018257e08 ffffffff813dc31d ffff88001852d480 Call Trace: [<ffffffff813dc31d>] acpi_hotplug_work_fn+0x1e/0x29 [<ffffffff8108eefb>] process_one_work+0x17b/0x460 [<ffffffff8108f69d>] worker_thread+0x11d/0x5b0 [<ffffffff8108f580>] ? rescuer_thread+0x3a0/0x3a0 [<ffffffff81096811>] kthread+0xe1/0x100 [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0 [<ffffffff816cc6bc>] ret_from_fork+0x7c/0xb0 [<ffffffff81096730>] ? kthread_create_on_node+0x1a0/0x1a0 This patch fixes this problem by checking if acpi_device->handler is NULL in acpi_scan_hot_remove(). Fixes: d22ddcbc4fb7 (ACPI / hotplug: Add demand_offline hotplug profile flag) Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | | | | | | ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN eventsLan Tianyu2014-08-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPU hotplug happens during S2RAM and CPU notify event will be CPU_XXX_FROZEN. acpi_cpu_soft_notify() ignores to check these events. This also may make acpi_cpu_soft_notify() fall into sleep during CPU_DYING/STARTING_FROZEN events which don't allow callbacks to sleep. This patch is to fix it. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | | | | | | | Merge tag 'pci-v3.17-changes-2' of ↵Linus Torvalds2014-08-15230-240/+242
|\ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas: "Part two of the PCI changes for v3.17: - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine) It's a mechanical change that removes uses of the DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge window to reduce conflicts, but it's possible you'll still see a few" * tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 15:10:05 +0100