summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* max17042_battery: Add IRQF_ONESHOT flag to use default irq handlerJonghwa Lee2013-12-241-3/+3
| | | | | | | | | | This patch adds IRQF_ONESHOT flag to max17042's irq since it uses primary default handler. Without this flag, requesting irq will be denied with returning error. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* gpio-charger: Support wakeup eventsDmitry Eremin-Solenikov2013-12-241-1/+18
| | | | | | | Add support for using gpio-charger IRQ as a wakeup event. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* power_supply: Add charger support for Maxim 14577Krzysztof Kozlowski2013-12-243-0/+319
| | | | | | | | | | | | MAX14577 chip is a multi-function device which includes MUIC, charger and voltage regulator. The driver is located in drivers/mfd. This patch supports battery charging control of MAX14577 chip and provides power supply class information to userspace. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* dt: Binding documentation for isp1704 chargerSebastian Reichel2013-12-241-0/+17
| | | | | | | Add devicetree binding documentation for isp1704-charger. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* isp1704_charger: Add DT supportSebastian Reichel2013-12-242-4/+51
| | | | | | | | | This patch introduces device tree support to the isp1704 charger driver. Adding support involved moving the handling of the enable GPIO from board code into the driver. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* charger-manager: of_cm_parse_desc() should be staticAnton Vorontsov2013-12-241-1/+1
| | | | | | | | | Fixes the following warning: drivers/power/charger-manager.c:1539:21: warning: symbol 'of_cm_parse_desc' was not declared. Should it be static? Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* bq2415x_charger: Add DT supportSebastian Reichel2013-12-241-20/+52
| | | | | | | | This adds DT support to the bq2415x driver. Signed-off-by: Sebastian Reichel <sre@debian.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* power_supply: Add power_supply_get_by_phandleSebastian Reichel2013-12-242-0/+34
| | | | | | | | Add method to get power supply by device tree phandle. Signed-off-by: Sebastian Reichel <sre@debian.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* bq2415x_charger: Use power_supply notifier for automodePali Rohár2013-12-242-60/+65
| | | | | | | | | | | | This patch removing set_mode_hook function from board data and replacing it with new string variable of notifier power supply device. After this change it is possible to add DT support because driver does not need specific board function anymore. Only static data and name of power supply device is required. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* power: reset: Add as3722 power-off driverLaxman Dewangan2013-12-243-0/+103
| | | | | | | | | | ams AS3722 supports the power off functionality to turn off system. This commit adds power off driver for ams AS3722. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* mfd: AS3722: Add dt node properties for system power controllerLaxman Dewangan2013-12-241-0/+11
| | | | | | | | | | ams AS3722 device supports the power off by turning off its all rails. Add dt node properties to enable this functionality on this device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* charger-manager: Support deivce tree in charger manager driverJonghwa Lee2013-12-243-9/+222
| | | | | | | | | Charger-manager can parse charger_desc data from devicetree which is used to register charger manager. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* charger-manager: Modify the way of checking battery's temperatureJonghwa Lee2013-12-242-49/+136
| | | | | | | | | | | | | | | | | | | Charger-manager driver used to check battery temperature through the callback function passed by platform data. Unfortunatley, without that pre-defined callback function, charger-manager can't get battery's temperature at all. Also passing callback function through platform data ruins DT support for charger-manager. This patch mondifies charger-manager driver to get temperature of battery without pre-defined callback function. Now, charger-manager can use either of battery thermometer in fuel-gauge and ouside of battery. It uses thermal framework interface for outer thermometer if thermal fw is enabled. Otherwise, it tries to use fuel-gauge's through the power supply interface. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* power_supply: Add power_supply notifierPali Rohár2013-12-012-0/+26
| | | | | | | | | | | | | | | | | This patch adds a notifier chain to the power_supply, this helps drivers in other subsystem to listen to changes in power supply subsystem. This would help to take some actions in those drivers on changing the power supply properties. One such scenario is to increase/decrease system performance based on the battery capacity/voltage. Another scenario is to adjust the h/w peak current detection voltage/current thresholds based on battery voltage/capacity. The notifier helps drivers to listen to changes in power_suppy susbystem without polling the power_supply properties Signed-off-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Jenny TC <jenny.tc@intel.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* max17042_battery: Fix build errors caused by missing REGMAP_I2C configAustin Boyle2013-12-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | max17042 now uses regmap interface but does not enable config option. This patch fixes the following build errors: drivers/power/max17042_battery.c:661:15: error: variable ‘max17042_regmap_config’ has initializer but incomplete type drivers/power/max17042_battery.c:662:2: error: unknown field ‘reg_bits’ specified in initializer drivers/power/max17042_battery.c:662:2: warning: excess elements in struct initializer drivers/power/max17042_battery.c:662:2: warning: (near initialization for ‘max17042_regmap_config’) drivers/power/max17042_battery.c:663:2: error: unknown field ‘val_bits’ specified in initializer drivers/power/max17042_battery.c:663:2: warning: excess elements in struct initializer drivers/power/max17042_battery.c:663:2: warning: (near initialization for ‘max17042_regmap_config’) drivers/power/max17042_battery.c:664:2: error: unknown field ‘val_format_endian’ specified in initializer drivers/power/max17042_battery.c:664:23: error: ‘REGMAP_ENDIAN_NATIVE’ undeclared here (not in a function) drivers/power/max17042_battery.c:664:2: warning: excess elements in struct initializer drivers/power/max17042_battery.c:664:2: warning: (near initialization for ‘max17042_regmap_config’) drivers/power/max17042_battery.c: In function ‘max17042_probe’: drivers/power/max17042_battery.c:684:2: error: implicit declaration of function ‘devm_regmap_init_i2c’ Signed-off-by: Austin Boyle <boyle.austin@gmail.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activateShuah Khan2013-12-011-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | power_supply_register() calls device_init_wakeup() to register a wakeup source before initializing dev_name. As a result, device_wakeup_enable() end up registering wakeup source with a null name when wakeup_source_register() gets called with dev_name(dev) which is null at the time. When kernel is booted with wakeup_source_activate enabled, it will panic when the trace point code tries to dereference ws->name. Fixed the problem by moving up the kobject_set_name() call prior to accesses to dev_name(). Replaced kobject_set_name() with dev_set_name() which is the right interface to be called from drivers. Fixed the call to device_del() prior to device_add() in for wakeup_init_failed error handling code. Trace after the change: bash-2143 [003] d... 132.280697: wakeup_source_activate: BAT1 state=0x20001 kworker/3:2-1169 [003] d... 132.281305: wakeup_source_deactivate: BAT1 state=0x30000 Oops message: [ 819.769934] device: 'BAT1': device_add [ 819.770078] PM: Adding info for No Bus:BAT1 [ 819.770235] BUG: unable to handle kernel NULL pointer dereference at (null) [ 819.770435] IP: [<ffffffff813381c0>] skip_spaces+0x30/0x30 [ 819.770572] PGD 3efd90067 PUD 3eff61067 PMD 0 [ 819.770716] Oops: 0000 [#1] SMP [ 819.770829] Modules linked in: arc4 iwldvm mac80211 x86_pkg_temp_thermal coretemp kvm_intel joydev i915 kvm uvcvideo ghash_clmulni_intel videobuf2_vmalloc aesni_intel videobuf2_memops videobuf2_core aes_x86_64 ablk_helper cryptd videodev iwlwifi lrw rfcomm gf128mul glue_helper bnep btusb media bluetooth parport_pc hid_generic ppdev snd_hda_codec_hdmi drm_kms_helper snd_hda_codec_realtek cfg80211 drm tpm_infineon samsung_laptop snd_hda_intel usbhid snd_hda_codec hid snd_hwdep snd_pcm microcode snd_page_alloc snd_timer psmouse i2c_algo_bit lpc_ich tpm_tis video wmi mac_hid serio_raw ext2 lp parport r8169 mii [ 819.771802] CPU: 0 PID: 2167 Comm: bash Not tainted 3.12.0+ #25 [ 819.771876] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X3D/900X4C/900X4D/SAMSUNG_NP1234567890, BIOS P03AAC 07/12/2012 [ 819.772022] task: ffff88002e6ddcc0 ti: ffff8804015ca000 task.ti: ffff8804015ca000 [ 819.772119] RIP: 0010:[<ffffffff813381c0>] [<ffffffff813381c0>] skip_spaces+0x30/0x30 [ 819.772242] RSP: 0018:ffff8804015cbc70 EFLAGS: 00010046 [ 819.772310] RAX: 0000000000000003 RBX: ffff88040cfd6d40 RCX: 0000000000000018 [ 819.772397] RDX: 0000000000020001 RSI: 0000000000000000 RDI: 0000000000000000 [ 819.772484] RBP: ffff8804015cbcc0 R08: 0000000000000000 R09: ffff8803f0768d40 [ 819.772570] R10: ffffea001033b800 R11: 0000000000000000 R12: ffffffff81c519c0 [ 819.772656] R13: 0000000000020001 R14: 0000000000000000 R15: 0000000000020001 [ 819.772744] FS: 00007ff98309b740(0000) GS:ffff88041f200000(0000) knlGS:0000000000000000 [ 819.772845] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 819.772917] CR2: 0000000000000000 CR3: 00000003f59dc000 CR4: 00000000001407f0 [ 819.773001] Stack: [ 819.773030] ffffffff81114003 ffff8804015cbcb0 0000000000000000 0000000000000046 [ 819.773146] ffff880409757a18 ffff8803f065a160 0000000000000000 0000000000020001 [ 819.773273] 0000000000000000 0000000000000000 ffff8804015cbce8 ffffffff8143e388 [ 819.773387] Call Trace: [ 819.773434] [<ffffffff81114003>] ? ftrace_raw_event_wakeup_source+0x43/0xe0 [ 819.773520] [<ffffffff8143e388>] wakeup_source_report_event+0xb8/0xd0 [ 819.773595] [<ffffffff8143e3cd>] __pm_stay_awake+0x2d/0x50 [ 819.773724] [<ffffffff8153395c>] power_supply_changed+0x3c/0x90 [ 819.773795] [<ffffffff8153407c>] power_supply_register+0x18c/0x250 [ 819.773869] [<ffffffff813d8d18>] sysfs_add_battery+0x61/0x7b [ 819.773935] [<ffffffff813d8d69>] battery_notify+0x37/0x3f [ 819.774001] [<ffffffff816ccb7c>] notifier_call_chain+0x4c/0x70 [ 819.774071] [<ffffffff81073ded>] __blocking_notifier_call_chain+0x4d/0x70 [ 819.774149] [<ffffffff81073e26>] blocking_notifier_call_chain+0x16/0x20 [ 819.774227] [<ffffffff8109397a>] pm_notifier_call_chain+0x1a/0x40 [ 819.774316] [<ffffffff81095b66>] hibernate+0x66/0x1c0 [ 819.774407] [<ffffffff81093931>] state_store+0x71/0xa0 [ 819.774507] [<ffffffff81331d8f>] kobj_attr_store+0xf/0x20 [ 819.774613] [<ffffffff811f8618>] sysfs_write_file+0x128/0x1c0 [ 819.774735] [<ffffffff8118579d>] vfs_write+0xbd/0x1e0 [ 819.774841] [<ffffffff811861d9>] SyS_write+0x49/0xa0 [ 819.774939] [<ffffffff816d1052>] system_call_fastpath+0x16/0x1b [ 819.775055] Code: 89 f8 48 89 e5 f6 82 c0 a6 84 81 20 74 15 0f 1f 44 00 00 48 83 c0 01 0f b6 10 f6 82 c0 a6 84 81 20 75 f0 5d c3 66 0f 1f 44 00 00 <80> 3f 00 55 48 89 e5 74 15 48 89 f8 0f 1f 40 00 48 83 c0 01 80 [ 819.775760] RIP [<ffffffff813381c0>] skip_spaces+0x30/0x30 [ 819.775881] RSP <ffff8804015cbc70> [ 819.775949] CR2: 0000000000000000 [ 819.794175] ---[ end trace c4ef25127039952e ]--- Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Anton Vorontsov <anton@enomsg.org>
* Linux 3.13-rc2v3.13-rc2Linus Torvalds2013-11-291-1/+1
|
* Merge tag 'arm64-stable' of ↵Linus Torvalds2013-11-298-66/+67
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 fixes from Catalin Marinas: - Remove preempt_count modifications in the arm64 IRQ handling code since that's already dealt with in generic irq_enter/irq_exit - PTE_PROT_NONE bit moved higher up to avoid overlapping with the hardware bits (for PROT_NONE mappings which are pte_present) - Big-endian fixes for ptrace support - Asynchronous aborts unmasking while in the kernel - pgprot_writecombine() change to create Normal NonCacheable memory rather than Device GRE * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Move PTE_PROT_NONE higher up arm64: Use Normal NonCacheable memory for writecombine arm64: debug: make aarch32 bkpt checking endian clean arm64: ptrace: fix compat registes get/set to be endian clean arm64: Unmask asynchronous aborts when in kernel mode arm64: dts: Reserve the memory used for secondary CPU release address arm64: let the core code deal with preempt_count
| * arm64: Move PTE_PROT_NONE higher upCatalin Marinas2013-11-291-14/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PTE_PROT_NONE means that a pte is present but does not have any read/write attributes. However, setting the memory type like pgprot_writecombine() is allowed and such bits overlap with PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the vma->vm_pg_prot on PROT_NONE mappings. This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit 59911ca4325d (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE together with the other software bits. Signed-off-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Steve Capper <steve.capper@linaro.org> Cc: <stable@vger.kernel.org> # 3.11+
| * arm64: Use Normal NonCacheable memory for writecombineCatalin Marinas2013-11-291-1/+1
| | | | | | | | | | | | | | | | This provides better performance compared to Device GRE and also allows unaligned accesses. Such memory is intended to be used with standard RAM (e.g. framebuffers) and not I/O. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: debug: make aarch32 bkpt checking endian cleanMatthew Leach2013-11-281-8/+12
| | | | | | | | | | | | | | | | | | | | The current breakpoint instruction checking code for A32 is not endian clean. Fix this with appropriate byte-swapping when retrieving instructions. Signed-off-by: Matthew Leach <matthew.leach@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: ptrace: fix compat registes get/set to be endian cleanMatthew Leach2013-11-281-21/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | On a BE system the wrong half of the X registers is retrieved/written when attempting to get/set the value of aarch32 registers through ptrace. Ensure that types are the correct width so that the relevant casting occurs. Signed-off-by: Matthew Leach <matthew.leach@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: Unmask asynchronous aborts when in kernel modeCatalin Marinas2013-11-253-0/+9
| | | | | | | | | | | | | | | | | | The asynchronous aborts are generally fatal for the kernel but they can be masked via the pstate A bit. If a system error happens while in kernel mode, it won't be visible until returning to user space. This patch enables this kind of abort early to help identifying the cause. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: dts: Reserve the memory used for secondary CPU release addressCatalin Marinas2013-11-251-0/+2
| | | | | | | | | | | | | | | | | | With the spin-table SMP booting method, secondary CPUs poll a location passed in the DT. The foundation-v8.dts file doesn't have this memory reserved and there is a risk of Linux using it before secondary CPUs are started. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: let the core code deal with preempt_countMarc Zyngier2013-11-251-22/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f27dde8deef3 (sched: Add NEED_RESCHED to the preempt_count) introduced the use of bit 31 in preempt_count for obscure scheduling purposes. This causes interrupts taken from EL0 to hit the (open coded) BUG when this flag is flipped while handling the interrupt (we compare the values before and after, and kill the kernel if they are different). The fix is to stop messing with the preempt count entirely, as this is already being dealt with in the generic code (irq_enter/irq_exit). Tested on a dual A53 FPGA running cyclictest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2013-11-2914-88/+87
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "One performance improvement and a few bug fixes. Two of the fixes deal with the clock related problems we have seen on recent kernels" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: handle asce-type exceptions as normal page fault s390,time: revert direct ktime path for s390 clockevent device s390/time,vdso: convert to the new update_vsyscall interface s390/uaccess: add missing page table walk range check s390/mm: optimize copy_page s390/dasd: validate request size before building CCW/TCW request s390/signal: always restore saved runtime instrumentation psw bit
| * | s390/mm: handle asce-type exceptions as normal page faultMartin Schwidefsky2013-11-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Git commit 9e34f2686bb088b211b6cac8772e1f644c6180f8 "s390/mm,tlb: tlb flush on page table upgrade fixup" removed the exception handler for the asce-type exception. This is incorrect as the user-copy with MVCOS can cause asce-type exceptions in the kernel if a user pointer is too large. Those need to be handled with do_no_context to branch to the fixup in the user-copy code. The simplest fix for this problem is to call do_dat_exception for asce-type excpetions, as there is no vma for the address the code will handle the exception correctly. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | s390,time: revert direct ktime path for s390 clockevent deviceMartin Schwidefsky2013-11-251-15/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Git commit 4f37a68cdaf6dea833cfdded2a3e0c47c0f006da "s390: Use direct ktime path for s390 clockevent device" makes use of the CLOCK_EVT_FEAT_KTIME clockevent option to avoid the delta calculation with ktime_get() in clockevents_program_event and the get_tod_clock() in s390_next_event. This is based on the assumption that the difference between the internal ktime and the hardware clock is reflected in the wall_to_monotonic delta. But this is not true, the ntp corrections are applied via changes to the tk->mult multiplier and this is not reflected in wall_to_monotonic. In theory this could be solved by using the raw monotonic clock but it is simpler to switch back to the standard clock delta calculation. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | s390/time,vdso: convert to the new update_vsyscall interfaceMartin Schwidefsky2013-11-258-45/+62
| | | | | | | | | | | | | | | | | | | | | Switch to the improved update_vsyscall interface that provides sub-nanosecond precision for gettimeofday and clock_gettime. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | s390/uaccess: add missing page table walk range checkHeiko Carstens2013-11-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When translating a user space address, the address must be checked against the ASCE limit of the process. If the address is larger than the maximum address that is reachable with the ASCE, an ASCE type exception must be generated. The current code simply ignored the higher order bits. This resulted in an address wrap around in user space instead of an exception in user space. Cc: stable@vger.kernel.org # v3.9+ Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | s390/mm: optimize copy_pageHeiko Carstens2013-11-201-25/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Always use the mvcl instruction to copy a page instead of mvpg or a couple of mvc instructions. Copying a huge page is 25% faster this way. Also bypass caches when copying pages since only parts of a page will be used afterwards. Especially when copying a huge page this would kick everything out of the L1 and L2 data caches on a zEC12 machine. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
| * | s390/dasd: validate request size before building CCW/TCW requestStefan Weinhuber2013-11-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An I/O request that does not read or write full blocks cannot be translated into a correct CCW or TCW program and should be rejected right away. In particular the code that creates TCW requests will not notice this problem and create broken TCWs that will be rejected by the hardware. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Reference-ID: RQM1956
| * | s390/signal: always restore saved runtime instrumentation psw bitHendrik Brueckner2013-11-202-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "s390: fix handling of runtime instrumentation psw bit" (5ebf250dab) changed the behavior of setting the runtime instrumentation psw bit. This commit restores the original logic: 1. When returning from the signal handler, the runtime instrumentation psw bit is restored to its saved state. 2. If the runtime instrumentation psw bit is enabled during the signal handler, it is always turned off when leaving the signal handler. The saved state is restored as described in 1. That also implies that turning on runtime instrumentation in the signal handler is only effective while running in the signal context. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
* | | Merge branch 'i2c/for-current' of ↵Linus Torvalds2013-11-295-13/+19
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some easy but needed fixes for i2c drivers since rc1" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: bcm2835: Linking platform nodes to adapter nodes i2c: omap: raw read and write endian fix i2c: i2c-bcm-kona: Fix module build i2c: i2c-diolan-u2c: different usb endpoints for DLN-2-U2C i2c: bcm-kona: remove duplicated include i2c: davinci: raw read and write endian fix
| * | | i2c: bcm2835: Linking platform nodes to adapter nodesFlorian Meier2013-11-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to find I2C devices in the device tree, the platform nodes have to be known by the I2C core. This requires setting the dev.of_node parameter of the adapter. Signed-off-by: Florian Meier <florian.meier@koalo.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | | i2c: omap: raw read and write endian fixVictor Kamensky2013-11-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | | i2c: i2c-bcm-kona: Fix module buildTim Kryger2013-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct a typo that prevented the driver from being built as a module. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | | i2c: i2c-diolan-u2c: different usb endpoints for DLN-2-U2CMartin Vogt2013-11-261-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous diolan adapter uses other out/in endpoints than the current DLN-2-U2C in compatibility mode. They changed from 0x2/0x84 to 0x3/0x83. This patch gets the endpoints from the usb interface, instead of hardcode them in the driver. This was tested on a current DLN-2-U2C board. Signed-off-by: Martin Vogt <mvogt1@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | | i2c: bcm-kona: remove duplicated includeWei Yongjun2013-11-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | | i2c: davinci: raw read and write endian fixTaras Kondratiuk2013-11-261-2/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I2C IP block expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | | Merge branch 'for-3.13-fixes' of ↵Linus Torvalds2013-11-291-13/+37
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: "This contains one important fix. The NUMA support added a while back broke ordering guarantees on ordered workqueues. It was enforced by having single frontend interface with @max_active == 1 but the NUMA support puts multiple interfaces on unbound workqueues on NUMA machines thus breaking the ordered guarantee. This is fixed by disabling NUMA support on ordered workqueues. The above and a couple other patches were sitting in for-3.12-fixes but I forgot to push that out, so they ended up waiting a bit too long. My aplogies. Other fixes are minor" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix pool ID allocation leakage and remove BUILD_BUG_ON() in init_workqueues workqueue: fix comment typo for __queue_work() workqueue: fix ordered workqueues in NUMA setups workqueue: swap set_cpus_allowed_ptr() and PF_NO_SETAFFINITY
| * | | workqueue: fix pool ID allocation leakage and remove BUILD_BUG_ON() in ↵Li Bin2013-11-231-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | init_workqueues When one work starts execution, the high bits of work's data contain pool ID. It can represent a maximum of WORK_OFFQ_POOL_NONE. Pool ID is assigned WORK_OFFQ_POOL_NONE when the work being initialized indicating that no pool is associated and get_work_pool() uses it to check the associated pool. So if worker_pool_assign_id() assigns a ID greater than or equal WORK_OFFQ_POOL_NONE to a pool, it triggers leakage, and it may break the non-reentrance guarantee. This patch fix this issue by modifying the worker_pool_assign_id() function calling idr_alloc() by setting @end param WORK_OFFQ_POOL_NONE. Furthermore, in the current implementation, the BUILD_BUG_ON() in init_workqueues makes no sense. The number of worker pools needed cannot be determined at compile time, because the number of backing pools for UNBOUND workqueues is dynamic based on the assigned custom attributes. So remove it. tj: Minor comment and indentation updates. Signed-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * | | workqueue: fix comment typo for __queue_work()Li Bin2013-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems the "dying" should be "draining" here. Signed-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * | | workqueue: fix ordered workqueues in NUMA setupsTejun Heo2013-11-231-2/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An ordered workqueue implements execution ordering by using single pool_workqueue with max_active == 1. On a given pool_workqueue, work items are processed in FIFO order and limiting max_active to 1 enforces the queued work items to be processed one by one. Unfortunately, 4c16bd327c ("workqueue: implement NUMA affinity for unbound workqueues") accidentally broke this guarantee by applying NUMA affinity to ordered workqueues too. On NUMA setups, an ordered workqueue would end up with separate pool_workqueues for different nodes. Each pool_workqueue still limits max_active to 1 but multiple work items may be executed concurrently and out of order depending on which node they are queued to. Fix it by using dedicated ordered_wq_attrs[] when creating ordered workqueues. The new attrs match the unbound ones except that no_numa is always set thus forcing all NUMA nodes to share the default pool_workqueue. While at it, add sanity check in workqueue creation path which verifies that an ordered workqueues has only the default pool_workqueue. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Libin <huawei.libin@huawei.com> Cc: stable@vger.kernel.org Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
| * | | workqueue: swap set_cpus_allowed_ptr() and PF_NO_SETAFFINITYOleg Nesterov2013-11-231-4/+5
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | Move the setting of PF_NO_SETAFFINITY up before set_cpus_allowed() in create_worker(). Otherwise userland can change ->cpus_allowed in between. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
* | | Merge branch 'for-3.13-fixes' of ↵Linus Torvalds2013-11-295-5/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "libata device removal path was removing parent device node before its child, which is mostly harmless but triggers warning after recent sysfs changes. Rafael's patch fixes the order. Other than that, minor controller-specific fixes and device ID additions" * 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ATA: Fix port removal ordering ahci: add Marvell 9230 to the AHCI PCI device list ata: fix acpi_bus_get_device() return value check pata_arasan_cf: add missing clk_disable_unprepare() on error path ahci: add support for IBM Akebono platform device
| * | | ATA: Fix port removal orderingRafael J. Wysocki2013-11-271-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit bcdde7e221a8 (sysfs: make __sysfs_remove_dir() recursive) Mika Westerberg sees traces analogous to the one below in Thunderbolt hot-remove testing: WARNING: CPU: 0 PID: 4 at fs/sysfs/group.c:214 sysfs_remove_group+0xc6/0xd0() sysfs group ffffffff81c6f1e0 not found for kobject 'host7' Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.12.0+ #13 Hardware name: /D33217CK, BIOS GKPPT10H.86A.0042.2013.0422.1439 04/22/2013 Workqueue: kacpi_hotplug acpi_hotplug_work_fn 0000000000000009 ffff8801002459b0 ffffffff817daab1 ffff8801002459f8 ffff8801002459e8 ffffffff810436b8 0000000000000000 ffffffff81c6f1e0 ffff88006d440358 ffff88006d440188 ffff88006e8b4c28 ffff880100245a48 Call Trace: [<ffffffff817daab1>] dump_stack+0x45/0x56 [<ffffffff810436b8>] warn_slowpath_common+0x78/0xa0 [<ffffffff81043727>] warn_slowpath_fmt+0x47/0x50 [<ffffffff811ad319>] ? sysfs_get_dirent_ns+0x49/0x70 [<ffffffff811ae526>] sysfs_remove_group+0xc6/0xd0 [<ffffffff81432f7e>] dpm_sysfs_remove+0x3e/0x50 [<ffffffff8142a0d0>] device_del+0x40/0x1b0 [<ffffffff8142a24d>] device_unregister+0xd/0x20 [<ffffffff8144131a>] scsi_remove_host+0xba/0x110 [<ffffffff8145f526>] ata_host_detach+0xc6/0x100 [<ffffffff8145f578>] ata_pci_remove_one+0x18/0x20 [<ffffffff812e8f48>] pci_device_remove+0x28/0x60 [<ffffffff8142d854>] __device_release_driver+0x64/0xd0 [<ffffffff8142d8de>] device_release_driver+0x1e/0x30 [<ffffffff8142d257>] bus_remove_device+0xf7/0x140 [<ffffffff8142a1b1>] device_del+0x121/0x1b0 [<ffffffff812e43d4>] pci_stop_bus_device+0x94/0xa0 [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0 [<ffffffff812e437b>] pci_stop_bus_device+0x3b/0xa0 [<ffffffff812e44dd>] pci_stop_and_remove_bus_device+0xd/0x20 [<ffffffff812fc743>] trim_stale_devices+0x73/0xe0 [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0 [<ffffffff812fc78b>] trim_stale_devices+0xbb/0xe0 [<ffffffff812fcb6e>] acpiphp_check_bridge+0x7e/0xd0 [<ffffffff812fd90d>] hotplug_event+0xcd/0x160 [<ffffffff812fd9c5>] hotplug_event_work+0x25/0x60 [<ffffffff81316749>] acpi_hotplug_work_fn+0x17/0x22 [<ffffffff8105cf3a>] process_one_work+0x17a/0x430 [<ffffffff8105db29>] worker_thread+0x119/0x390 [<ffffffff8105da10>] ? manage_workers.isra.25+0x2a0/0x2a0 [<ffffffff81063a5d>] kthread+0xcd/0xf0 [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180 [<ffffffff817eb33c>] ret_from_fork+0x7c/0xb0 [<ffffffff81063990>] ? kthread_create_on_node+0x180/0x180 The source of this problem is that SCSI hosts are removed from ATA ports after calling ata_tport_delete() which removes the port's sysfs directory, among other things. Now, after commit bcdde7e221a8, the sysfs directory is removed along with all of its subdirectories that include the SCSI host's sysfs directory and its subdirectories at this point. Consequently, when device_del() is finally called for any child device of the SCSI host and tries to remove its "power" group (which is already gone then), it triggers the above warning. To make the warnings go away, change the removal ordering in ata_port_detach() so that the SCSI host is removed from the port before ata_tport_delete() is called. References: https://bugzilla.kernel.org/show_bug.cgi?id=65281 Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
| * | | ahci: add Marvell 9230 to the AHCI PCI device listSamir Benmendil2013-11-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested with a DAWICONTROL DC-624e on 3.10.10 Signed-off-by: Samir Benmendil <samir.benmendil@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Levente Kurusa <levex@linux.com> Cc: stable@vger.kernel.org
| * | | ata: fix acpi_bus_get_device() return value checkYijing Wang2013-11-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since acpi_bus_get_device() returns plain int and not acpi_status, ACPI_FAILURE() should not be used for checking its return value. Fix that. tj: Dropped unused local variable @status from odd_can_poweroff(). Reported by kbuild test bot. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Aaron Lu <aaron.lu@intel.com> Cc: linux-ide@vger.kernel.org Cc: kbuild test robot <fengguang.wu@intel.com>
| * | | pata_arasan_cf: add missing clk_disable_unprepare() on error pathWei Yongjun2013-11-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the missing clk_disable_unprepare() before return from cf_init() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-10 19:20:55 +0100