summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* net: Add GRO support for vxlan trafficOr Gerlitz2014-01-222-7/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add GRO handlers for vxlann, by using the UDP GRO infrastructure. For single TCP session that goes through vxlan tunneling I got nice improvement from 6.8Gbs to 11.5Gbs --> UDP/VXLAN GRO disabled $ netperf -H 192.168.52.147 -c -C $ netperf -t TCP_STREAM -H 192.168.52.147 -c -C MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.52.147 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 65536 65536 10.00 6799.75 12.54 24.79 0.604 1.195 --> UDP/VXLAN GRO enabled $ netperf -t TCP_STREAM -H 192.168.52.147 -c -C MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.52.147 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 65536 65536 10.00 11562.72 24.90 20.34 0.706 0.577 Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Export gro_find_by_type helpersOr Gerlitz2014-01-221-0/+2
| | | | | | | | Export the gro_find_receive/complete_by_type helpers to they can be invoked by the gro callbacks of encapsulation protocols such as vxlan. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add GRO support for UDP encapsulating protocolsOr Gerlitz2014-01-224-1/+156
| | | | | | | | | | | | | | | | | | | | Add GRO handlers for protocols that do UDP encapsulation, with the intent of being able to coalesce packets which encapsulate packets belonging to the same TCP session. For GRO purposes, the destination UDP port takes the role of the ether type field in the ethernet header or the next protocol in the IP header. The UDP GRO handler will only attempt to coalesce packets whose destination port is registered to have gro handler. Use a mark on the skb GRO CB data to disallow (flush) running the udp gro receive code twice on a packet. This solves the problem of udp encapsulated packets whose inner VM packet is udp and happen to carry a port which has registered offloads. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* stmmac: Fix kernel crashes for jumbo framesVince Bridgers2014-01-227-12/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These changes correct the following issues with jumbo frames on the stmmac driver: 1) The Synopsys EMAC can be configured to support different FIFO sizes at core configuration time. There's no way to query the controller and know the FIFO size, so the driver needs to get this information from the device tree in order to know how to correctly handle MTU changes and setting up dma buffers. The default max-frame-size is as currently used, which is the size of a jumbo frame. 2) The driver was enabling Jumbo frames by default, but was not allocating dma buffers of sufficient size to handle the maximum possible packet size that could be received. This led to memory corruption since DMAs were occurring beyond the extent of the allocated receive buffers for certain types of network traffic. kernel BUG at net/core/skbuff.c:126! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: CPU: 0 PID: 563 Comm: sockperf Not tainted 3.13.0-rc6-01523-gf7111b9 #31 task: ef35e580 ti: ef252000 task.ti: ef252000 PC is at skb_panic+0x60/0x64 LR is at skb_panic+0x60/0x64 pc : [<c03c7c3c>] lr : [<c03c7c3c>] psr: 60000113 sp : ef253c18 ip : 60000113 fp : 00000000 r10: ef3a5400 r9 : 00000ebc r8 : ef3a546c r7 : ee59f000 r6 : ee59f084 r5 : ee59ff40 r4 : ee59f140 r3 : 000003e2 r2 : 00000007 r1 : c0b9c420 r0 : 0000007d Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 2e8ac04a DAC: 00000015 Process sockperf (pid: 563, stack limit = 0xef252248) Stack: (0xef253c18 to 0xef254000) 3c00: 00000ebc ee59f000 3c20: ee59f084 ee59ff40 ee59f140 c04a9cd8 ee8c50c0 00000ebc ee59ff40 00000000 3c40: ee59f140 c02d0ef0 00000056 ef1eda80 ee8c50c0 00000ebc 22bbef29 c0318f8c 3c60: 00000056 ef3a547c ffe2c716 c02c9c90 c0ba1298 ef3a5838 ef3a5838 ef3a5400 3c80: 000020c0 ee573840 000055cb ef3f2050 c053f0e0 c0319214 22b9b085 22d92813 3ca0: 00001c80 004b8e00 ef3a5400 ee573840 ef3f2064 22d92813 ef3f2064 000055cb 3cc0: ef3f2050 c031a19c ef252000 00000000 00000000 c0561bc0 00000000 ff00ffff 3ce0: c05621c0 ef3a5400 ef3f2064 ee573840 00000020 ef3f2064 000055cb ef3f2050 3d00: c053f0e0 c031cad0 c053e740 00000e60 00000000 00000000 ee573840 ef3a5400 3d20: ef0a6e00 00000000 ef3f2064 c032507c 00010000 00000020 c0561bc0 c0561bc0 3d40: ee599850 c032799c 00000000 ee573840 c055a380 ef3a5400 00000000 ef3f2064 3d60: ef3f2050 c032799c 0101c7c0 2b6755cb c059a280 c030e4d8 000055cb ffffffff 3d80: ee574fc0 c055a380 ee574000 ee573840 00002b67 ee573840 c03fe9c4 c053fa68 3da0: c055a380 00001f6f 00000000 ee573840 c053f0e0 c0304fdc ef0a6e01 ef3f2050 3dc0: ee573858 ef031000 ee573840 c03055d8 c0ba0c40 ef000f40 00100100 c053f0dc 3de0: c053ffdc c053f0f0 00000008 00000000 ef031000 c02da948 00001140 00000000 3e00: c0563c78 ef253e5f 00000020 ee573840 00000020 c053f0f0 ef313400 ee573840 3e20: c053f0e0 00000000 00000000 c05380c0 ef313400 00001000 00000015 c02df280 3e40: ee574000 ef001e00 00000000 00001080 00000042 005cd980 ef031500 ef031500 3e60: 00000000 c02df824 ef031500 c053e390 c0541084 f00b1e00 c05925e8 c02df864 3e80: 00001f5c ef031440 c053e390 c0278524 00000002 00000000 c0b9eb48 c02df280 3ea0: ee8c7180 00000100 c0542ca8 00000015 00000040 ef031500 ef031500 ef031500 3ec0: c027803c ef252000 00000040 000000ec c05380c0 c0b9eb40 c0b9eb48 c02df940 3ee0: ef060780 ffffa4dd c0564a9c c056343c 002e80a8 00000080 ef031500 00000001 3f00: c053808c ef252000 fffec100 00000003 00000004 002e80a8 0000000c c00258f0 3f20: 002e80a8 c005e704 00000005 00000100 c05634d0 c0538080 c05333e0 00000000 3f40: 0000000a c0565580 c05380c0 ffffa4dc c05434f4 00400100 00000004 c0534cd4 3f60: 00000098 00000000 fffec100 002e80a8 00000004 002e80a8 002a20e0 c0025da8 3f80: c0534cd4 c000f020 fffec10c c053ea60 ef253fb0 c0008530 0000ffe2 b6ef67f4 3fa0: 40000010 ffffffff 00000124 c0012f3c 0000ffe2 002e80f0 0000ffe2 00004000 3fc0: becb6338 becb6334 00000004 00000124 002e80a8 00000004 002e80a8 002a20e0 3fe0: becb6300 becb62f4 002773bb b6ef67f4 40000010 ffffffff 00000000 00000000 [<c03c7c3c>] (skb_panic+0x60/0x64) from [<c02d0ef0>] (skb_put+0x4c/0x50) [<c02d0ef0>] (skb_put+0x4c/0x50) from [<c0318f8c>] (tcp_collapse+0x314/0x3ec) [<c0318f8c>] (tcp_collapse+0x314/0x3ec) from [<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) [<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) from [<c031a19c>] (tcp_data_queue+0x480/0xe6c) [<c031a19c>] (tcp_data_queue+0x480/0xe6c) from [<c031cad0>] (tcp_rcv_established+0x180/0x62c) [<c031cad0>] (tcp_rcv_established+0x180/0x62c) from [<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) [<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) from [<c032799c>] (tcp_v4_rcv+0x718/0x73c) [<c032799c>] (tcp_v4_rcv+0x718/0x73c) from [<c0304fdc>] (ip_local_deliver+0x98/0x274) [<c0304fdc>] (ip_local_deliver+0x98/0x274) from [<c03055d8>] (ip_rcv+0x420/0x758) [<c03055d8>] (ip_rcv+0x420/0x758) from [<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) [<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) from [<c02df280>] (netif_receive_skb+0x48/0xb4) [<c02df280>] (netif_receive_skb+0x48/0xb4) from [<c02df824>] (napi_gro_flush+0x70/0x94) [<c02df824>] (napi_gro_flush+0x70/0x94) from [<c02df864>] (napi_complete+0x1c/0x34) [<c02df864>] (napi_complete+0x1c/0x34) from [<c0278524>] (stmmac_poll+0x4e8/0x5c8) [<c0278524>] (stmmac_poll+0x4e8/0x5c8) from [<c02df940>] (net_rx_action+0xc4/0x1e4) [<c02df940>] (net_rx_action+0xc4/0x1e4) from [<c00258f0>] (__do_softirq+0x12c/0x2e8) [<c00258f0>] (__do_softirq+0x12c/0x2e8) from [<c0025da8>] (irq_exit+0x78/0xac) [<c0025da8>] (irq_exit+0x78/0xac) from [<c000f020>] (handle_IRQ+0x44/0x90) [<c000f020>] (handle_IRQ+0x44/0x90) from [<c0008530>] (gic_handle_irq+0x2c/0x5c) [<c0008530>] (gic_handle_irq+0x2c/0x5c) from [<c0012f3c>] (__irq_usr+0x3c/0x60) 3) The driver was setting the dma buffer size after allocating dma buffers, which caused a system panic when changing the MTU. BUG: Bad page state in process ifconfig pfn:2e850 page:c0b72a00 count:0 mapcount:0 mapping: (null) index:0x0 page flags: 0x200(arch_1) Modules linked in: CPU: 0 PID: 566 Comm: ifconfig Not tainted 3.13.0-rc6-01523-gf7111b9 #29 [<c001547c>] (unwind_backtrace+0x0/0xf8) from [<c00122dc>] (show_stack+0x10/0x14) [<c00122dc>] (show_stack+0x10/0x14) from [<c03c793c>] (dump_stack+0x70/0x88) [<c03c793c>] (dump_stack+0x70/0x88) from [<c00b2620>] (bad_page+0xc8/0x118) [<c00b2620>] (bad_page+0xc8/0x118) from [<c00b302c>] (get_page_from_freelist+0x744/0x870) [<c00b302c>] (get_page_from_freelist+0x744/0x870) from [<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) [<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) from [<c00b4858>] (__get_free_pages+0x10/0x54) [<c00b4858>] (__get_free_pages+0x10/0x54) from [<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) [<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) from [<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) [<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) from [<c02d240c>] (__alloc_skb+0x68/0x13c) [<c02d240c>] (__alloc_skb+0x68/0x13c) from [<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) [<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) from [<c0279378>] (stmmac_open+0x63c/0x1024) [<c0279378>] (stmmac_open+0x63c/0x1024) from [<c02e18cc>] (__dev_open+0xa0/0xfc) [<c02e18cc>] (__dev_open+0xa0/0xfc) from [<c02e1b40>] (__dev_change_flags+0x94/0x158) [<c02e1b40>] (__dev_change_flags+0x94/0x158) from [<c02e1c24>] (dev_change_flags+0x18/0x48) [<c02e1c24>] (dev_change_flags+0x18/0x48) from [<c0337bc0>] (devinet_ioctl+0x638/0x700) [<c0337bc0>] (devinet_ioctl+0x638/0x700) from [<c02c7aec>] (sock_ioctl+0x64/0x290) [<c02c7aec>] (sock_ioctl+0x64/0x290) from [<c0100890>] (do_vfs_ioctl+0x78/0x5b8) [<c0100890>] (do_vfs_ioctl+0x78/0x5b8) from [<c0100e0c>] (SyS_ioctl+0x3c/0x5c) [<c0100e0c>] (SyS_ioctl+0x3c/0x5c) from [<c000e760>] The fixes have been verified using reproducible, automated testing. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dts: Add a binding for Synopsys emac max-frame-sizeVince Bridgers2014-01-221-0/+3
| | | | | | | | | | | | | This change adds a parameter for the Synopsys 10/100/1000 stmmac Ethernet driver to configure the maximum frame size supported by the EMAC driver. Synopsys allows the FIFO sizes to be configured when the cores are built for a particular device, but do not provide a way for the driver to read information from the device about the maximum MTU size supported as limited by the device's FIFO size. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* rxrpc: out of bound read in debug codeDan Carpenter2014-01-221-7/+14
| | | | | | | | | Smatch complains because we are using an untrusted index into the rxrpc_acks[] array. It's just a read and it's only in the debug code, but it's simple enough to add a check and fix it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* 8021q: update descriptionYegor Yefremov2014-01-221-5/+5
| | | | | | | | | Replace deprecated 'vconfig' tool with 'ip' from 'iproute2'. Add some beautifications like replacing 'ethernet' with 'Ethernet' and removing unneeded spaces. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: protect protocols not handling ipv4 from v4 connection/bind attemptsHannes Frederic Sowa2014-01-226-2/+24
| | | | | | | | | | | | | Some ipv6 protocols cannot handle ipv4 addresses, so we must not allow connecting and binding to them. sendmsg logic does already check msg->name for this but must trust already connected sockets which could be set up for connection to ipv4 address family. Per-socket flag ipv6only is of no use here, as it is under users control by setsockopt. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: enable anycast addresses as source addresses in ICMPv6 error messagesFX Le Bail2014-01-221-1/+2
| | | | | | | | | - Uses ipv6_anycast_destination() in icmp6_send(). Suggested-by: Bill Fink <billfink@mindspring.com> Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: delete redundant calls of tcp_mtup_init()Peter Pan(潘卫平)2014-01-222-2/+0
| | | | | | | | | As tcp_rcv_state_process() has already calls tcp_mtup_init() for non-fastopen sock, we can delete the redundant calls of tcp_mtup_init() in tcp_{v4,v6}_syn_recv_sock(). Signed-off-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* packet: fix a couple of cppcheck warningsDaniel Borkmann2014-01-221-22/+15
| | | | | | | | | | | | | | | Doesn't bring much, but also doesn't hurt us to fix 'em: 1) In tpacket_rcv() flush dcache page we can restirct the scope for start and end and remove one layer of indent. 2) In tpacket_destruct_skb() we can restirct the scope for ph. 3) In alloc_one_pg_vec_page() we can remove the NULL assignment and change spacing a bit. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: remove the useless argument from ip_tunnel_hash()Duan Jiong2014-01-221-5/+4
| | | | | | | | | Since commit c544193214("GRE: Refactor GRE tunneling code") introduced function ip_tunnel_hash(), the argument itn is no longer in use, so remove it. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bond: make slave_sysfs_ops staticstephen hemminger2014-01-221-1/+1
| | | | | Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: remove unnecessary initializations in net_dev_initSabrina Dubroca2014-01-221-10/+0
| | | | | | | | softnet_data is already set to 0, no need to use memset or initialize specific fields to 0 or NULL afterwards. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add vxlan descriptionJesse Brandeburg2014-01-221-0/+1
| | | | | | | | | Add a description to the vxlan module, helping save the world from the minions of destruction and confusion. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'sfc'David S. Miller2014-01-213-10/+39
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Shradha Shah says: ==================== Bug Fixes for SFC driver I am taking over the upstream patch submission work for the sfc driver from Ben Hutchings. These patches are bug fixes to the sfc driver involving replacement of the PORT RESET MC command and fixing transposed ptp_{under,over}size_sync_window_statistics The PORT_RESET bug fix is needed for all versions supporting EF10 i.e all versions including and after 3.12. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * sfc: Fix transposed ptp_{under, over}size_sync_windows statisticsBen Hutchings2014-01-211-2/+2
| | | | | | | | | | | | | | | | | | | | Somehow I transposed these two while bringing the original statistics support upstream. Fixes: 99691c4ac112 ('sfc: Add PTP counters to ethtool stats') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sfc: Change efx_mcdi_reset_port to use ENTITY_RESET MC command.Jon Cooper2014-01-212-8/+37
|/ | | | | | | | PORT_RESET MC command was NOP in the ef10 firmware hence we are using ENTITY_RESET to make sure all resource allocations are reset. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net_sched: act: export tcf_hash_search() instead of tcf_hash_lookup()WANG Cong2014-01-213-10/+6
| | | | | | | | | | So that we will not expose struct tcf_common to modules. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net_sched: act: fetch hinfo from a->ops->hinfoWANG Cong2014-01-2111-60/+53
| | | | | | | | | | | Every action ops has a pointer to hash info, so we don't need to hard-code it in each module. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: fix NULL pointer dereference in stmmac_get_tx_hwtstampdamuzi0002014-01-203-19/+21
| | | | | | | | | | | | | | When timestamping is enabled, stmmac_tx_clean will call stmmac_get_tx_hwtstamp to get tx TS. But the skb can be NULL because the last of its tx_skbuff is NULL if this packet frame is filled in more than one descriptors. To fix the issue, change the code: - Store TX skb to the tx_skbuff[] of frame's last segment. - Check skb is not NULL in stmmac_get_tx_hwtstamp. Signed-off-by: Bruce Liu <damuzi000@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC'sChen-Yu Tsai2014-01-206-0/+185
| | | | | | | | | | | | | | | The Allwinner A20 has an ethernet controller that seems to be an early version of Synopsys DesignWare MAC 10/100/1000 Universal, which is supported by the stmmac driver. Allwinner's GMAC requires setting additional registers in the SoC's clock control unit. The exact version of the DWMAC IP that Allwinner uses is unknown, thus the exact feature set is unknown. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Use driver data and callbacks tied with compatible stringsChen-Yu Tsai2014-01-202-10/+52
| | | | | | | | | | The stmmac driver core allows passing feature flags and callbacks via platform data. Add a similar stmmac_of_data to pass flags and callbacks tied to compatible strings. This allows us to extend stmmac with glue layers for different SoCs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Deprecate snps, phy-addr and auto-detect PHY addressChen-Yu Tsai2014-01-202-2/+8
| | | | | | | | | | | | The snps,phy-addr device tree property is non-standard, and should be removed in favor of proper phy node support. Remove it from the binding documents and warn if the property is still used. Most PHYs respond to address 0, but a few don't, so auto-detect PHY address by default, to make up for the lack of explicit address selection. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Honor DT parameter to force DMA store and forward modeChen-Yu Tsai2014-01-201-0/+2
| | | | | | | | "snps,force_sf_dma_mode" is documented in stmmac device tree bindings, but is never handled by the driver. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* blackfin: Update stmmac callback signaturesChen-Yu Tsai2014-01-201-1/+1
| | | | | | | | stmmac callbacks have been extended for better separation. Update them to avoid breakage. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Allocate and pass soc/board specific data to callbacksChen-Yu Tsai2014-01-203-10/+26
| | | | | | | | | | | The current .init and .exit callbacks requires access to driver private data structures. This is not a good seperation and abstraction. Instead, we add a new .setup callback for allocating private data, and pass the returned pointer to the other callbacks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Add support for optional reset controlChen-Yu Tsai2014-01-206-5/+28
| | | | | | | | | | | The DWMAC has a reset assert line, which is used on some SoCs. Add an optional reset control to stmmac driver core. To support reset control deferred probing, this patch changes the driver probe function to return the actual error, instead of just -EINVAL. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: Enable stmmac main clock when probing hardwareChen-Yu Tsai2014-01-201-13/+13
| | | | | | | | | The stmmac driver does not enable the main clock during the probe phase. If the clock was not enabled by the boot loader or was disabled by the kernel, hardware features and the MDIO bus would not be probed properly. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* DT: net: davinci_emac: "phy-handle" property is actually optionalSergei Shtylyov2014-01-201-2/+2
| | | | | | | | | | | Though described as required, the "phy-handle" property for the DaVinci EMAC binding is actually optional, as the driver will happily function without it, assuming 100/FULL link; the property is not specified either in the example device node, or in the actual EMAC device nodes for DA850 and AM3517 device trees. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fix "queues" uevent between network namespacesWeilong Chen2014-01-202-2/+34
| | | | | | | | | | | | | | When I create a new namespace with 'ip netns add net0', or add/remove new links in a namespace with 'ip link add/delete type veth', rx/tx queues events can be got in all namespaces. That is because rx/tx queue ktypes do not have namespace support, and their kobj parents are setted to NULL. This patch is to fix it. Reported-by: Libo Chen <chenlibo@huawei.com> Signed-off-by: Libo Chen <chenlibo@huawei.com> Signed-off-by: Weilong Chen <chenweilong@huawei.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net_sched: act: remove capab from struct tc_action_opsWANG Cong2014-01-2010-12/+0
| | | | | | | | | It is not actually implemented. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: document accel_priv parameter for __dev_queue_xmit()Jason Wang2014-01-201-1/+2
| | | | | | | | To silent "make htmldocs" warning. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: fix missing SCTP mailing list address updateJean Sacren2014-01-201-1/+1
| | | | | | | | | | | | | | | | | The commit 91705c61b5202 ("net: sctp: trivial: update mailing list address") updated almost all the SCTP mailing list address from "lksctp-developers@lists.sourceforge.net" to "linux-sctp@vger.kernel.org" except for the one in include/linux/sctp.h file. Fix this way trivial one so that all is updated. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Cc: Daniel Borkmann <dborkman@redhat.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: optimize link local address searchHannes Frederic Sowa2014-01-201-3/+9
| | | | | | | | | | | | | | | ipv6_link_dev_addr sorts newly added addresses by scope in ifp->addr_list. Smaller scope addresses are added to the tail of the list. Use this fact to iterate in reverse over addr_list and break out as soon as a higher scoped one showes up, so we can spare some cycles on machines with lot's of addresses. The ordering of the addresses is not relevant and we are more likely to get the eui64 generated address with this change anyway. Suggested-by: Brian Haley <brian.haley@hp.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: cleanup 10g codestephen hemminger2014-01-201-20/+4
| | | | | | | | Code should avoid needless exports, don't export something unless it used. Make local functions static and remove unused stubs. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: fix sparse warningsFengguang Wu2014-01-201-8/+8
| | | | | | | | Previous patch changed prototypes, but forgot functions. Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: make IPV6_RECVPKTINFO work for ipv4 datagramsHannes Frederic Sowa2014-01-2010-24/+68
| | | | | | | | | | | | | | | | | | | | | We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* sch_netem: replace magic numbers with enumerateYang Yingliang2014-01-201-19/+28
| | | | | | | | Replace some magic numbers which describe states of 4-state model loss generator with enumerate. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: add flowlabel_consistency sysctlFlorent Fourcot2014-01-205-0/+25
| | | | | | | | | | | | | | | With the introduction of IPV6_FL_F_REFLECT, there is no guarantee of flow label unicity. This patch introduces a new sysctl to protect the old behaviour, enable by default. Changelog of V3: * rename ip6_flowlabel_consistency to flowlabel_consistency * use net_info_ratelimited() * checkpatch cleanups Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: add a flag to get the flow label used remotlyFlorent Fourcot2014-01-204-3/+14
| | | | | | | | | | | | This information is already available via IPV6_FLOWINFO of IPV6_2292PKTOPTIONS, and them a filtering to get the flow label information. But it is probably logical and easier for users to add this here, and to control both sent/received flow label values with the IPV6_FLOWLABEL_MGR option. Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GETFlorent Fourcot2014-01-204-1/+34
| | | | | | | | | | | | | | | | With this option, the socket will reply with the flow label value read on received packets. The goal is to have a connection with the same flow label in both direction of the communication. Changelog of V4: * Do not erase the flow label on the listening socket. Use pktopts to store the received value Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv4: be friend with drop monitorEric Dumazet2014-01-194-6/+6
| | | | | | | | Replace some dev_kfree_skb() with kfree_skb() calls when we drop one skb, this might help bug tracking. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add build-time checks for msg->msg_name sizeSteffen Hurrle2014-01-1934-78/+68
| | | | | | | | | | | | | | | This is a follow-up patch to f3d3342602f8bc ("net: rework recvmsg handler msg_name and msg_namelen logic"). DECLARE_SOCKADDR validates that the structure we use for writing the name information to is not larger than the buffer which is reserved for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR consistently in sendmsg code paths. Signed-off-by: Steffen Hurrle <steffen@hurrle.net> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: introduce SO_BPF_EXTENSIONSMichal Sekletar2014-01-1916-0/+43
| | | | | | | | | | | | | | | | | | | | | | | For user space packet capturing libraries such as libpcap, there's currently only one way to check which BPF extensions are supported by the kernel, that is, commit aa1113d9f85d ("net: filter: return -EINVAL if BPF_S_ANC* operation is not supported"). For querying all extensions at once this might be rather inconvenient. Therefore, this patch introduces a new option which can be used as an argument for getsockopt(), and allows one to obtain information about which BPF extensions are supported by the current kernel. As David Miller suggests, we do not need to define any bits right now and status quo can just return 0 in order to state that this versions supports SKF_AD_PROTOCOL up to SKF_AD_PAY_OFFSET. Later additions to BPF extensions need to add their bits to the bpf_tell_extensions() function, as documented in the comment. Signed-off-by: Michal Sekletar <msekleta@redhat.com> Cc: David Miller <davem@davemloft.net> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-01-1872-266/+392
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c net/ipv4/tcp_metrics.c Overlapping changes between the "don't create two tcp metrics objects with the same key" race fix in net and the addition of the destination address in the lookup key in net-next. Minor overlapping changes in bnx2x driver. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2014-01-1825-130/+169
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) The value choosen for the new SO_MAX_PACING_RATE socket option on parisc was very poorly choosen, let's fix it while we still can. From Eric Dumazet. 2) Our generic reciprocal divide was found to handle some edge cases incorrectly, part of this is encoded into the BPF as deep as the JIT engines themselves. Just use a real divide throughout for now. From Eric Dumazet. 3) Because the initial lookup is lockless, the TCP metrics engine can end up creating two entries for the same lookup key. Fix this by doing a second lookup under the lock before we actually create the new entry. From Christoph Paasch. 4) Fix scatter-gather list init in usbnet driver, from Bjørn Mork. 5) Fix unintended 32-bit truncation in cxgb4 driver's bit shifting. From Dan Carpenter. 6) Netlink socket dumping uses the wrong socket state for timewait sockets. Fix from Neal Cardwell. 7) Fix netlink memory leak in ieee802154_add_iface(), from Christian Engelmayer. 8) Multicast forwarding in ipv4 can overflow the per-rule reference counts, causing all multicast traffic to cease. Fix from Hannes Frederic Sowa. 9) via-rhine needs to stop all TX queues when it resets the device, from Richard Weinberger. 10) Fix RDS per-cpu accesses broken by the this_cpu_* conversions. From Gerald Schaefer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: s390/bpf,jit: fix 32 bit divisions, use unsigned divide instructions parisc: fix SO_MAX_PACING_RATE typo ipv6: simplify detection of first operational link-local address on interface tcp: metrics: Avoid duplicate entries with the same destination-IP net: rds: fix per-cpu helper usage e1000e: Fix compilation warning when !CONFIG_PM_SLEEP bpf: do not use reciprocal divide be2net: add dma_mapping_error() check for dma_map_page() bnx2x: Don't release PCI bars on shutdown net,via-rhine: Fix tx_timeout handling batman-adv: fix batman-adv header overhead calculation qlge: Fix vlan netdev features. net: avoid reference counter overflows on fib_rules in multicast forwarding dm9601: add USB IDs for new dm96xx variants MAINTAINERS: add virtio-dev ML for virtio ieee802154: Fix memory leak in ieee802154_add_iface() net: usbnet: fix SG initialisation inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait sockets cxgb4: silence shift wrapping static checker warning
| | * s390/bpf,jit: fix 32 bit divisions, use unsigned divide instructionsHeiko Carstens2014-01-181-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The s390 bpf jit compiler emits the signed divide instructions "dr" and "d" for unsigned divisions. This can cause problems: the dividend will be zero extended to a 64 bit value and the divisor is the 32 bit signed value as specified A or X accumulator, even though A and X are supposed to be treated as unsigned values. The divide instrunctions will generate an exception if the result cannot be expressed with a 32 bit signed value. This is the case if e.g. the dividend is 0xffffffff and the divisor either 1 or also 0xffffffff (signed: -1). To avoid all these issues simply use unsigned divide instructions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * parisc: fix SO_MAX_PACING_RATE typoEric Dumazet2014-01-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | SO_MAX_PACING_RATE definition on parisc got a typo. Its not too late to fix it, before 3.13 is official. Fixes: 62748f32d501 ("net: introduce SO_MAX_PACING_RATE") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * ipv6: simplify detection of first operational link-local address on interfaceHannes Frederic Sowa2014-01-182-22/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 1ec047eb4751e3 ("ipv6: introduce per-interface counter for dad-completed ipv6 addresses") I build the detection of the first operational link-local address much to complex. Additionally this code now has a race condition. Replace it with a much simpler variant, which just scans the address list when duplicate address detection completes, to check if this is the first valid link local address and send RS and MLD reports then. Fixes: 1ec047eb4751e3 ("ipv6: introduce per-interface counter for dad-completed ipv6 addresses") Reported-by: Jiri Pirko <jiri@resnulli.us> Cc: Flavio Leitner <fbl@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Flavio Leitner <fbl@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-11 18:49:11 +0100