summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* davinci: Add LCD Graphics support for DA830/OMAP-L137 EVMSteve Chen2009-11-253-2/+65
| | | | | | | | | | | | | | | | | | | Add graphics support for the Sharp LCD035Q3DG01 graphical LCD that's on the User Interface (UI) daughter card of the DA830/OMAP-L137 EVM. The LCD shares EMIFA lines with the NAND and NOR devices that are also on the UI card so those lines are shared via a couple of muxes. The muxes are controlled by the 'MUX_MODE' line on the UI card. The 'MUX_MODE' line is controlled by pin P6 of a pcf8574 i2c expander that's at i2c address 0x3f on UI card. The i2c expander is controlled using the gpio infrastructure from the board code using the 'setup()' and 'teardown()' routines. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add support for Sharp LCD035Q3DG01 graphical LCDMark A. Greer2009-11-253-13/+20
| | | | | | | | | | Add support for the Sharp LCD035Q3DG01 graphical LCD. This requires a minor interface change to da8xx_register_lcdc() so that the board code can pass in the platform_data which describes the lcd controller that's to be used. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add MMC/SD support for DA830/OMAP-L137 EVMDavid A. Griego2009-11-251-0/+54
| | | | | | | | Add pinmux settings, etc. to enable the MMC/SC hardware. Signed-off-by: David A. Griego <dgriego@mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm646x: Add support for 3.x silicon revisionHemant Pedanekar2009-11-251-1/+8
| | | | | | | | | | | DM6467 silicon revisions 3.x have variant field in JTAGID register as '1'. This path adds entry for the same in dm646x_ids to be able to boot on boards with 3.x revision chips. Also modifies name for 'variant=0' (revisions 1.0, 1.1). Signed-off-by: Hemant Pedanekar <hemantp@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA850/OMAP-L138: allow async3 source to be changedSekhar Nori2009-11-253-2/+43
| | | | | | | | | | | The patch allows Async3 clock source to be selected between PLL1 SYSCLK2 and PLL0 SYSCLK2. Having Async3 source from PLL1 SYSCLK2 allows peripherals on that domain to remain unaffected by frequency scaling on PLL0. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: support re-parenting a clock in the clock frameworkSekhar Nori2009-11-251-0/+27
| | | | | | | | | | | The clk_set_parent() API is implemented to enable re-parenting clocks in the clock tree. This is useful in DVFS and helps by shifting clocks to an asynchronous domain where supported by hardware Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: support changing the clock rate in clock frameworkSekhar Nori2009-11-252-3/+119
| | | | | | | | | | | | | | | | | clk_round_rate, clk_set_rate have been updated to handle dynamic frequency changes. The motivation behind the changes is to support dynamic CPU frequency change. davinci_set_pllrate() changes the PLL rate of a given PLL. This function has been presented as a generic function though it has been tested only on OMAP-L138 EVM. No other currently available DaVinci device will probably use this function, but any future device specific changes will hopefully be small enough to get taken care using a cpu_is_xxx() macro. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: make clock rate re-calculation easySekhar Nori2009-11-252-20/+50
| | | | | | | | | | | | | | | Make clock rate recalculation easy by having a re-calculate function for each clock. The existing functions for calculation of output rates of PLL and PLL-derived sysclks have been convered to the new re-calculate API. A new function is introduced to take care of rate (re)calculation for leaf clocks. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: enable easy top down traversal of clock treeSekhar Nori2009-11-252-3/+9
| | | | | | | | | | | Achieve easy top down traversal of clock tree by keeping track of each clock's list of children. This is useful in supporting DVFS where clock rates of all children need to be updated in an efficient manner. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA8XX/OMAP-L1XX: JTAG ID register should offset from SYSCFG baseSekhar Nori2009-11-253-3/+5
| | | | | | | | This makes it clear that JTAG ID register is part of the SYSCFG module Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA8XX/OMAP-L1XX: Avoid use of IO_ADDRESS for SYSCFG moduleSekhar Nori2009-11-254-2/+17
| | | | | | | Avoid use of IO_ADDRESS() for SYSCFG module by doing an ioremap() instead. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: DA8XX/OMAP-L1XX: It's SYSCFG not BOOT_CFGSekhar Nori2009-11-253-3/+3
| | | | | | | | Rename the DA8XX_BOOT_CFG_BASE macro to get it in line with the public documentation for these parts. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Add DA830/OMAP-L137 EVM specific pinmux setting for McASP1Mark A. Greer2009-11-251-1/+10
| | | | | | | | The DA830/OMAP-L137 EVM cannot use the default pinmux setup for McASP1 so put the correct settings in the board file for that platform. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Change DA8xx/OMAP-L13x McASP registration routine nameMark A. Greer2009-11-254-4/+4
| | | | | | | | For consistency with existing code, change the name of da8xx_init_mcasp() to da8xx_register_mcasp(). Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Move DA8xx/OMAP-L13x emac register routineMark A. Greer2009-11-251-5/+5
| | | | | | | | Some mcasp code was inserted between the emac resource setup and the related register routine that registers the emac. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: DM365: Add platform device for McBSPMiguel Aguilar2009-11-254-1/+56
| | | | | | | | | 1) Registers the platform device for McBSP on dm365. 2) Add platform data to DM365 EVM board file. 3) Set i2c address for audio codec at DM365 EVM board file. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: Correct USB parent clockSandeep Paulraj2009-11-251-1/+1
| | | | | | | | The parent clock for the USB source clock is actually PLL1 aux clock, not PLL2 sysclk1. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: DM365: SDIO interrupt resource correctionPhaneendra Kumar2009-11-251-1/+1
| | | | | | | This patch fixes a typo/bug in the DM365 SDIO interrupt assignment Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Linux 2.6.32-rc8v2.6.32-rc8Linus Torvalds2009-11-191-1/+1
|
* Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds2009-11-192-11/+9
|\ | | | | | | | | | | * 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: SUNRPC: Address buffer overrun in rpc_uaddr2sockaddr() NFSv4: Fix a cache validation bug which causes getcwd() to return ENOENT
| * SUNRPC: Address buffer overrun in rpc_uaddr2sockaddr()Chuck Lever2009-11-141-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The size of buf[] must account for the string termination needed for the first strict_strtoul() call. Introduced in commit a02d6926. Fábio Olivé Leite points out that strict_strtoul() requires _either_ '\n\0' _or_ '\0' termination, so use the simpler '\0' here instead. See http://bugzilla.kernel.org/show_bug.cgi?id=14546 . Reported-by: argp@census-labs.com Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Fábio Olivé Leite <fleite@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
| * NFSv4: Fix a cache validation bug which causes getcwd() to return ENOENTTrond Myklebust2009-11-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changeset a65318bf3afc93ce49227e849d213799b072c5fd (NFSv4: Simplify some cache consistency post-op GETATTRs) incorrectly changed the getattr bitmap for readdir(). This causes the readdir() function to fail to return a fileid/inode number, which again exposed a bug in the NFS readdir code that causes spurious ENOENT errors to appear in applications (see http://bugzilla.kernel.org/show_bug.cgi?id=14541). The immediate band aid is to revert the incorrect bitmap change, but more long term, we should change the NFS readdir code to cope with the fact that NFSv4 servers are not required to support fileids/inode numbers. Reported-by: Daniel J Blueman <daniel.blueman@gmail.com> Cc: stable@kernel.org Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* | vt: Fix use of "new" in a struct fieldAlan Cox2009-11-192-5/+5
| | | | | | | | | | | | | | | | | | | | | | As this struct is exposed to user space and the API was added for this release it's a bit of a pain for the C++ world and we still have time to fix it. Rename the fields before we end up with that pain in an actual release. Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Olivier Goffart Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Fix handling of the HP/Acer 'DMAR at zero' BIOS error for machines with ↵David Woodhouse2009-11-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | <4GiB RAM. Commit 86cf898e1d0fca245173980e3897580db38569a8 ("intel-iommu: Check for 'DMAR at zero' BIOS error earlier.") was supposed to work by pretending not to detect an IOMMU if it was actually being reported by the BIOS at physical address zero. However, the intel_iommu_init() function is called unconditionally, as are the corresponding functions for other IOMMU hardware. So the patch only worked if you have RAM above the 4GiB boundary. It caused swiotlb to be initialised when no IOMMU was detected during early boot, and thus the later IOMMU init would refuse to run. But if you have less RAM than that, swiotlb wouldn't get set up and the IOMMU _would_ still end up being initialised, even though we never claimed to detect it. This patch also sets the dmar_disabled flag when the error is detected during the initial detection phase -- so that the later call to intel_iommu_init() will return without doing anything, regardless of whether swiotlb is used or not. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'fixes' of ↵Linus Torvalds2009-11-197-32/+70
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix stale cpufreq_cpu_governor pointer [CPUFREQ] Resolve time unit thinko in ondemand/conservative govs [CPUFREQ] speedstep-ich: fix error caused by 394122ab144dae4b276d74644a2f11c44a60ac5c [CPUFREQ] Fix use after free on governor restore [CPUFREQ] acpi-cpufreq: blacklist Intel 0f68: Fix HT detection and put in notification message [CPUFREQ] powernow-k8: Fix test in get_transition_latency() [CPUFREQ] longhaul: select Longhaul version 2 for capable CPUs
| * | [CPUFREQ] Fix stale cpufreq_cpu_governor pointerPrarit Bhargava2009-11-181-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dave, Attached is an update of my patch against the cpufreq fixes branch. Before applying the patch I compiled and booted the tree to see if the panic was still there -- to my surprise it was not. This is because of the conversion of cpufreq_cpu_governor to a char[]. While the panic is kaput, the problem of stale data continues and my patch is still valid. It is possible to end up with the wrong governor after hotplug events because CPUFREQ_DEFAULT_GOVERNOR is statically linked to a default, while the cpu siblings may have had a different governor assigned by a user. ie) the patch is still needed in order to keep the governors assigned properly when hotplugging devices Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Dave Jones <davej@redhat.com>
| * | [CPUFREQ] Resolve time unit thinko in ondemand/conservative govsPallipadi, Venkatesh2009-11-182-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ondemand and conservative governors are messing up time units in the code path where NO_HZ is not enabled and ignore_nice is set. The walltime idletime stored is in jiffies and nice time calculation is happening in microseconds. The problem was reported and diagnosed by Alexander here. http://marc.info/?l=linux-kernel&m=125752550404513&w=2 The patch below fixes this thinko. Reported-by: Alexander Miller <Miller@fmi.uni-stuttgart.de> Tested-by: Alexander Miller <Miller@fmi.uni-stuttgart.de> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
| * | [CPUFREQ] speedstep-ich: fix error caused by ↵Rusty Russell2009-11-181-12/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 394122ab144dae4b276d74644a2f11c44a60ac5c "[CPUFREQ] cpumask: avoid playing with cpus_allowed in speedstep-ich.c" changed the code to mistakenly pass the current cpu as the "processor" argument of speedstep_get_frequency(), whereas it should be the type of the processor. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14340 Based on a patch by Dave Mueller. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Dominik Brodowski <linux@brodo.de> Reported-by: Dave Mueller <dave.mueller@gmx.ch> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
| * | [CPUFREQ] Fix use after free on governor restoreDmitry Monakhov2009-11-181-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently on governer backup/restore path we storing governor's pointer. This is wrong because one may unload governor's module after cpu goes offline. As result use-after-free will take place on restored cpu. It is not easy to exploit this bug, but still we have to close this issue ASAP. Issue was introduced by following commit 084f34939424161669467c19280dbcf637730314 ##TESTCASE## #!/bin/sh -x modprobe acpi_cpufreq # Any non default governor, in may case it is "ondemand" modprobe cpufreq_ondemand echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor rmmod acpi_cpufreq rmmod cpufreq_ondemand modprobe acpi_cpufreq # << use-after-free here. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Dave Jones <davej@redhat.com>
| * | [CPUFREQ] acpi-cpufreq: blacklist Intel 0f68: Fix HT detection and put in ↵John Villalovos2009-11-181-6/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | notification message Removing the SMT/HT check, since the Errata doesn't mention Hyper-Threading. Adding in a printk, so that the user knows why acpi-cpufreq refuses to load. Also, once system is blacklisted, don't repeat checks to see if blacklisted. This also causes the message to only be printed once, rather than for each CPU. Signed-off-by: John L. Villalovos <john.l.villalovos@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
| * | [CPUFREQ] powernow-k8: Fix test in get_transition_latency()Roel Kluin2009-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | | Not makes it a bool before the comparison. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
| * | [CPUFREQ] longhaul: select Longhaul version 2 for capable CPUsKrzysztof Helt2009-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a typo in the longhaul detection code so only Longhaul v1 or Longhaul v3 is selected. The Longhaul v2 is not selected even for CPUs which are capable of. Tested on PCChips Giga Pro board. Frequency changes work and the Longhaul v2 detects that the board is not capable of changing CPU voltage. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Dave Jones <davej@redhat.com>
* | | strcmp: fix overflow and possibly signedness errorLinus Torvalds2009-11-191-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Doing the strcmp return value as signed char __res = *cs - *ct; is wrong for two reasons. The subtraction can overflow because __res doesn't use a type big enough. Moreover the compared bytes should be interpreted as unsigned char as specified by POSIX. The same problem is fixed in strncmp. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Michael Buesch <mb@bu3sch.de> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'agp-fixes' of ↵Linus Torvalds2009-11-191-6/+5
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp/intel-agp: Set dma_mask for capable chipsets before agp_add_bridge()
| * | | agp/intel-agp: Set dma_mask for capable chipsets before agp_add_bridge()David Woodhouse2009-11-191-6/+5
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | We should set this before calling agp_add_bridge() so that it's done before we map the scratch page too. This should probably fix the regression reported as k.o. bug #14627. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2009-11-191-2/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: ima: replace GFP_KERNEL with GFP_NOFS
| * | | ima: replace GFP_KERNEL with GFP_NOFSMimi Zohar2009-11-181-2/+2
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While running fsstress tests on the NFSv4 mounted ext3 and ext4 filesystem, the following call trace was generated on the nfs server machine. Replace GFP_KERNEL with GFP_NOFS in ima_iint_insert() to avoid a potential deadlock. ================================= [ INFO: inconsistent lock state ] 2.6.31-31.el6.x86_64 #1 --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd2/75 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: [<ffffffff811edd5e>] jbd2_journal_start+0xfe/0x13f {RECLAIM_FS-ON-W} state was registered at: [<ffffffff81091e40>] mark_held_locks+0x65/0x99 [<ffffffff81091f31>] lockdep_trace_alloc+0xbd/0xf5 [<ffffffff81126fdd>] kmem_cache_alloc+0x40/0x185 [<ffffffff812344d7>] ima_iint_insert+0x3d/0xf1 [<ffffffff812345b0>] ima_inode_alloc+0x25/0x44 [<ffffffff811484ac>] inode_init_always+0xec/0x271 [<ffffffff81148682>] alloc_inode+0x51/0xa1 [<ffffffff81148700>] new_inode+0x2e/0x94 [<ffffffff811b2f08>] ext4_new_inode+0xb8/0xdc9 [<ffffffff811be611>] ext4_create+0xcf/0x175 [<ffffffff8113e2cd>] vfs_create+0x82/0xb8 [<ffffffff8113f337>] do_filp_open+0x32c/0x9ee [<ffffffff811309b9>] do_sys_open+0x6c/0x12c [<ffffffff81130adc>] sys_open+0x2e/0x44 [<ffffffff81011e42>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff irq event stamp: 90371 hardirqs last enabled at (90371): [<ffffffff8112708d>] kmem_cache_alloc+0xf0/0x185 hardirqs last disabled at (90370): [<ffffffff81127026>] kmem_cache_alloc+0x89/0x185 softirqs last enabled at (89492): [<ffffffff81068ecf>] __do_softirq+0x1bf/0x1eb softirqs last disabled at (89477): [<ffffffff8101312c>] call_softirq+0x1c/0x30 other info that might help us debug this: 2 locks held by kswapd2/75: #0: (shrinker_rwsem){++++..}, at: [<ffffffff810f98ba>] shrink_slab+0x44/0x177 #1: (&type->s_umount_key#25){++++..}, at: [<ffffffff811450ba>] Reported-by: Muni P. Beerakam <mbeeraka@in.ibm.com> Reported-by: Amit K. Arora <amitarora@in.ibm.com> Cc: stable@kernel.org Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
* | | Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds2009-11-195-49/+48
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP: cs should be positive in gpmc_cs_free() omap: fix unlikely(x) < y omap3: clock: Fixed dpll3_m2x2 rate calculation omap3: clock: Fix the DPLL freqsel computations omap: Fix keymap for zoom2 according to matrix keypad framwork
| * | | OMAP: cs should be positive in gpmc_cs_free()Roel Kluin2009-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The index `cs' is signed, test whether it is negative before we release gpmc_cs_mem[cs]. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | omap: fix unlikely(x) < yRoel Kluin2009-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The closing parenthesis was not in the right location. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | omap3: clock: Fixed dpll3_m2x2 rate calculationTero Kristo2009-11-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current calculation does not take into account any changes to M2 divisor, and thus when we change VDD2 OPP, dpll3_m2x2 rate does not change. Fixed by re-routing dpll3_m2x2 parent to dpll3_m2. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | omap3: clock: Fix the DPLL freqsel computationsRajendra Nayak2009-11-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the freqsel value computation. Use n instead of (n+1) The formula in the TRM uses a zero-based N, hence the (n+1); however at this point in the clock34xx.c code, N is one-based. Hayati Bayrakdar <h-bayrakdar@ti.com> and Nishanth Menon <nm@ti.com> helped track down this bug. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: modified commit message] Cc: Hayati Bayrakdar <h-bayrakdar@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | omap: Fix keymap for zoom2 according to matrix keypad framworkVimal Singh2009-11-161-44/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interpretation of 'row' and 'col' got reversed in matrix keymap framework. Also last element '0', present in keymap array, is no more needed. Correcting zoom2 keyboard keymap accordingly. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-11-185-3/+14
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: tlv320aic23 fix rate selection ASoC: OMAP3 Pandora: update for TWL4030 codec changes ASoC: Modifying the license string GPLv2 for OMAP3 EVM ALSA: hda - Fix quirk for VAIO type G ALSA: usb - Quirk to disable master volume control in PCM2702
| * \ \ \ Merge branch 'fix/asoc' into for-linusTakashi Iwai2009-11-183-3/+4
| |\ \ \ \
| | * | | | ASoC: tlv320aic23 fix rate selectionTroy Kisky2009-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the ordering of sr_valid_mask array. The lower bit of the index represents USB not bosr. Reported-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * | | | ASoC: OMAP3 Pandora: update for TWL4030 codec changesGrazvydas Ignotas2009-11-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A while ago TWL4030 had it's playback stream name changed, but pandora needs it for it's playback path. Update to correct stream name so that playback works again. Also mark VIBRA output as not connected. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * | | | ASoC: Modifying the license string GPLv2 for OMAP3 EVMAnuj Aggarwal2009-11-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correcting the license string from GPLv2 -> GPL v2. Found the problem while building OMAP3 ASoC driver as module. Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | | | | Merge branch 'fix/hda' into for-linusTakashi Iwai2009-11-181-0/+1
| |\ \ \ \ \
| | * | | | | ALSA: hda - Fix quirk for VAIO type GTakashi Iwai2009-11-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Vaio type G laptop doesn't work with the current quirk setup. After some tests, it turned out that it should be model=auto as default. Reported-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 13:17:18 +0100