summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/fsl-cpm: Configure clock correctly for SCCWolfgang Ocker2010-04-202-6/+19
| | | | | | | | | | | | | | | Some board setup functions call cpm1_clk_setup() or cmp2_clk_setup() to configure the clock source. If CPM_CLK_RTX has been used for the parameter mode, the clock has been configured only for TX but not for RX. With this patch CPM_CLK_RTX configures the clock for both directions correctly. Signed-off-by: Wolfgang Ocker <weo@reccoware.de> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl_booke: Correct test for MMU_FTR_BIG_PHYSBecky Bruce2010-04-201-2/+2
| | | | | | | The code was looking for this in cpu_features, not mmu_features. Fix this. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx/86xx: Fix build w/ CONFIG_PCI=nAnton Vorontsov2010-04-202-4/+4
| | | | | | | | | | | | | | | | | | Currently some MPC85xx and MPC86xx boards fail to build without CONFIG_PCI: arch/powerpc/platforms/fsl_uli1575.c: In function 'quirk_final_uli5249': arch/powerpc/platforms/fsl_uli1575.c:234: error: implicit declaration of function 'pci_bus_for_each_resource' arch/powerpc/platforms/fsl_uli1575.c:234: error: expected ';' before '{' token cc1: warnings being treated as errors arch/powerpc/platforms/fsl_uli1575.c:223: warning: unused variable 'dummy' make[1]: *** [arch/powerpc/platforms/fsl_uli1575.o] Error 1 This patch fixes the issue by appending 'if PCI' condition when selecting FSL_ULI1575 Kconfig symbol. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Linux 2.6.34-rc5v2.6.34-rc5Linus Torvalds2010-04-201-2/+2
|
* rmap: add exclusively owned pages to the newest anon_vmaRik van Riel2010-04-201-11/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent anon_vma fixes cause many anonymous pages to end up in the parent process anon_vma, even when the page is exclusively owned by the current process. Adding exclusively owned anonymous pages to the top anon_vma reduces rmap scanning overhead, especially in workloads with forking servers. This patch adds a parameter to __page_set_anon_rmap that can be used to indicate whether or not the added page is exclusively owned by the current process. Pages added through page_add_new_anon_rmap are exclusively owned by the current process, and can be added to the top anon_vma. Pages added through page_add_anon_rmap can be either shared or exclusively owned, so we do the conservative thing and add it to the oldest anon_vma. A next step would be to add the exclusive parameter to page_add_anon_rmap, to be used from functions where we do know for sure whether a page is exclusively owned. Signed-off-by: Rik van Riel <riel@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Lightly-tested-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> [ Edited to look nicer - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-04-195-100/+118
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Turn lower lookup error messages into debug messages eCryptfs: Copy lower directory inode times and size on link ecryptfs: fix use with tmpfs by removing d_drop from ecryptfs_destroy_inode ecryptfs: fix error code for missing xattrs in lower fs eCryptfs: Decrypt symlink target for stat size eCryptfs: Strip metadata in xattr flag in encrypted view eCryptfs: Clear buffer before reading in metadata xattr eCryptfs: Rename ecryptfs_crypt_stat.num_header_bytes_at_front eCryptfs: Fix metadata in xattr feature regression
| * eCryptfs: Turn lower lookup error messages into debug messagesTyler Hicks2010-04-191-6/+6
| | | | | | | | | | | | | | | | | | Vaugue warnings about ENAMETOOLONG errors when looking up an encrypted file name have caused many users to become concerned about their data. Since this is a rather harmless condition, I'm moving this warning to only be printed when the ecryptfs_verbosity module param is 1. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
| * eCryptfs: Copy lower directory inode times and size on linkTyler Hicks2010-04-191-2/+2
| | | | | | | | | | | | | | | | | | The timestamps and size of a lower inode involved in a link() call was being copied to the upper parent inode. Instead, we should be copying lower parent inode's timestamps and size to the upper parent inode. I discovered this bug using the POSIX test suite at Tuxera. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
| * ecryptfs: fix use with tmpfs by removing d_drop from ecryptfs_destroy_inodeJeff Mahoney2010-04-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since tmpfs has no persistent storage, it pins all its dentries in memory so they have d_count=1 when other file systems would have d_count=0. ->lookup is only used to create new dentries. If the caller doesn't instantiate it, it's freed immediately at dput(). ->readdir reads directly from the dcache and depends on the dentries being hashed. When an ecryptfs mount is mounted, it associates the lower file and dentry with the ecryptfs files as they're accessed. When it's umounted and destroys all the in-memory ecryptfs inodes, it fput's the lower_files and d_drop's the lower_dentries. Commit 4981e081 added this and a d_delete in 2008 and several months later commit caeeeecf removed the d_delete. I believe the d_drop() needs to be removed as well. The d_drop effectively hides any file that has been accessed via ecryptfs from the underlying tmpfs since it depends on it being hashed for it to be accessible. I've removed the d_drop on my development node and see no ill effects with basic testing on both tmpfs and persistent storage. As a side effect, after ecryptfs d_drops the dentries on tmpfs, tmpfs BUGs on umount. This is due to the dentries being unhashed. tmpfs->kill_sb is kill_litter_super which calls d_genocide to drop the reference pinning the dentry. It skips unhashed and negative dentries, but shrink_dcache_for_umount_subtree doesn't. Since those dentries still have an elevated d_count, we get a BUG(). This patch removes the d_drop call and fixes both issues. This issue was reported at: https://bugzilla.novell.com/show_bug.cgi?id=567887 Reported-by: Árpád Bíró <biroa@demasz.hu> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Dustin Kirkland <kirkland@canonical.com> Cc: stable@kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
| * ecryptfs: fix error code for missing xattrs in lower fsChristian Pulvermacher2010-04-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | If the lower file system driver has extended attributes disabled, ecryptfs' own access functions return -ENOSYS instead of -EOPNOTSUPP. This breaks execution of programs in the ecryptfs mount, since the kernel expects the latter error when checking for security capabilities in xattrs. Signed-off-by: Christian Pulvermacher <pulvermacher@gmx.de> Cc: stable@kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
| * eCryptfs: Decrypt symlink target for stat sizeTyler Hicks2010-04-191-48/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a getattr handler for eCryptfs symlinks that is capable of reading the lower target and decrypting its path. Prior to this patch, a stat's st_size field would represent the strlen of the encrypted path, while readlink() would return the strlen of the decrypted path. This could lead to confusion in some userspace applications, since the two values should be equal. https://bugs.launchpad.net/bugs/524919 Reported-by: Loïc Minier <loic.minier@canonical.com> Cc: stable@kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
| * eCryptfs: Strip metadata in xattr flag in encrypted viewTyler Hicks2010-03-233-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | The ecryptfs_encrypted_view mount option provides a unified way of viewing encrypted eCryptfs files. If the metadata is stored in a xattr, the metadata is moved to the file header when the file is read inside the eCryptfs mount. Because of this, we should strip the ECRYPTFS_METADATA_IN_XATTR flag from the header's flag section. This allows eCryptfs to treat the file as an eCryptfs file with a header at the front. Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
| * eCryptfs: Clear buffer before reading in metadata xattrTyler Hicks2010-03-232-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We initially read in the first PAGE_CACHE_SIZE of a file to if the eCryptfs header marker can be found. If it isn't found and ecryptfs_xattr_metadata was given as a mount option, then the user.ecryptfs xattr is read into the same buffer. Since the data from the first page of the file wasn't cleared, it is possible that we think we've found a second tag 3 or tag 1 packet and then error out after the packet contents aren't as expected. This patch clears the buffer before filling it with metadata from the user.ecryptfs xattr. Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
| * eCryptfs: Rename ecryptfs_crypt_stat.num_header_bytes_at_frontTyler Hicks2010-03-234-20/+15
| | | | | | | | | | | | | | | | This patch renames the num_header_bytes_at_front variable to metadata_size since it now contains the max size of the metadata. Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
| * eCryptfs: Fix metadata in xattr feature regressionTyler Hicks2010-03-234-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes regression in 8faece5f906725c10e7a1f6caf84452abadbdc7b When using the ecryptfs_xattr_metadata mount option, eCryptfs stores the metadata (normally stored at the front of the file) in the user.ecryptfs xattr. This causes ecryptfs_crypt_stat.num_header_bytes_at_front to be 0, since there is no header data at the front of the file. This results in too much memory being requested and ENOMEM being returned from ecryptfs_write_metadata(). This patch fixes the problem by using the num_header_bytes_at_front variable for specifying the max size of the metadata, despite whether it is stored in the header or xattr. Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
* | Fix ISDN/Gigaset build failureLinus Torvalds2010-04-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | Commit b91ecb00 ("gigaset: include cleanup cleanup") removed an implicit sched.h inclusion that came in via slab.h, and caused various compile problems as a result. This should fix it. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds2010-04-196-31/+121
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: Make RCU lockdep check the lockdep_recursion variable rcu: Update docs for rcu_access_pointer and rcu_dereference_protected rcu: Better explain the condition parameter of rcu_dereference_check() rcu: Add rcu_access_pointer and rcu_dereference_protected
| * | rcu: Make RCU lockdep check the lockdep_recursion variablePaul E. McKenney2010-04-192-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lockdep facility temporarily disables lockdep checking by incrementing the current->lockdep_recursion variable. Such disabling happens in NMIs and in other situations where lockdep might expect to recurse on itself. This patch therefore checks current->lockdep_recursion, disabling RCU lockdep splats when this variable is non-zero. In addition, this patch removes the "likely()", as suggested by Lai Jiangshan. Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Reported-by: David Miller <davem@davemloft.net> Tested-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: eric.dumazet@gmail.com LKML-Reference: <20100415195039.GA22623@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | rcu: Update docs for rcu_access_pointer and rcu_dereference_protectedPaul E. McKenney2010-04-144-22/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update examples and lists of APIs to include these new primitives. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: eric.dumazet@gmail.com LKML-Reference: <1270852752-25278-3-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | rcu: Better explain the condition parameter of rcu_dereference_check()David Howells2010-04-141-5/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Better explain the condition parameter of rcu_dereference_check() that describes the conditions under which the dereference is permitted to take place (and incorporate Yong Zhang's suggestion). This condition is only checked under lockdep proving. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: eric.dumazet@gmail.com LKML-Reference: <1270852752-25278-2-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | rcu: Add rcu_access_pointer and rcu_dereference_protectedPaul E. McKenney2010-04-141-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds variants of rcu_dereference() that handle situations where the RCU-protected data structure cannot change, perhaps due to our holding the update-side lock, or where the RCU-protected pointer is only to be fetched, not dereferenced. These are needed due to some performance concerns with using rcu_dereference() where it is not required, aside from the need for lockdep/sparse checking. The new rcu_access_pointer() primitive is for the case where the pointer is be fetch and not dereferenced. This primitive may be used without protection, RCU or otherwise, due to the fact that it uses ACCESS_ONCE(). The new rcu_dereference_protected() primitive is for the case where updates are prevented, for example, due to holding the update-side lock. This primitive does neither ACCESS_ONCE() nor smp_read_barrier_depends(), so can only be used when updates are somehow prevented. Suggested-by: David Howells <dhowells@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: eric.dumazet@gmail.com LKML-Reference: <1270852752-25278-1-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-04-1918-28/+35
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: gigaset: include cleanup cleanup packet : remove init_net restriction WAN: flush tx_queue in hdlc_ppp to prevent panic on rmmod hw_driver. ip: Fix ip_dev_loopback_xmit() net: dev_pick_tx() fix fib: suppress lockdep-RCU false positive in FIB trie. tun: orphan an skb on tx forcedeth: fix tx limit2 flag check iwlwifi: work around bogus active chains detection
| * | | gigaset: include cleanup cleanupTilman Schmidt2010-04-189-20/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 5a0e3ad causes slab.h to be included twice in many of the Gigaset driver's source files, first via the common include file gigaset.h and then a second time directly. Drop the spares, and use the opportunity to clean up a few more similar cases. Impact: cleanup, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> CC: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | packet : remove init_net restrictionDaniel Lezcano2010-04-171-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The af_packet protocol is used by Perl to do ioctls as reported by Stephane Riviere: "Net::RawIP relies on SIOCGIFADDR et SIOCGIFHWADDR to get the IP and MAC addresses of the network interface." But in a new network namespace these ioctl fail because it is disabled for a namespace different from the init_net_ns. These two lines should not be there as af_inet and af_packet are namespace aware since a long time now. I suppose we forget to remove these lines because we sent the af_packet first, before af_inet was supported. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Reported-by: Stephane Riviere <stephane.riviere@regis-dgac.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | WAN: flush tx_queue in hdlc_ppp to prevent panic on rmmod hw_driver.Krzysztof Halasa2010-04-171-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tx_queue is used as a temporary queue when not allowed to queue skb directly to the hw device driver (which may sleep). Most paths flush it before returning, but ppp_start() currently cannot. Make sure we don't leave skbs pointing to a non-existent device. Thanks to Michael Barkowski for reporting this problem. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge branch 'master' of ↵David S. Miller2010-04-151-0/+12
| |\ \ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * | | iwlwifi: work around bogus active chains detectionJohannes Berg2010-04-091-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current algorithm will sometimes "detect" that more chains are enabled than are really present in the device because, for unknown reasons, the ucode sends up all-zeroes signal values. The simplest way of solving this is to restrict the active chains mask to the chains we know are really present on the device. This fixes a bug with some devices where, since sometimes more chains are enabled than really present, the system would hang. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * | | | ip: Fix ip_dev_loopback_xmit()Eric Dumazet2010-04-152-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eric Paris got following trace with a linux-next kernel [ 14.203970] BUG: using smp_processor_id() in preemptible [00000000] code: avahi-daemon/2093 [ 14.204025] caller is netif_rx+0xfa/0x110 [ 14.204035] Call Trace: [ 14.204064] [<ffffffff81278fe5>] debug_smp_processor_id+0x105/0x110 [ 14.204070] [<ffffffff8142163a>] netif_rx+0xfa/0x110 [ 14.204090] [<ffffffff8145b631>] ip_dev_loopback_xmit+0x71/0xa0 [ 14.204095] [<ffffffff8145b892>] ip_mc_output+0x192/0x2c0 [ 14.204099] [<ffffffff8145d610>] ip_local_out+0x20/0x30 [ 14.204105] [<ffffffff8145d8ad>] ip_push_pending_frames+0x28d/0x3d0 [ 14.204119] [<ffffffff8147f1cc>] udp_push_pending_frames+0x14c/0x400 [ 14.204125] [<ffffffff814803fc>] udp_sendmsg+0x39c/0x790 [ 14.204137] [<ffffffff814891d5>] inet_sendmsg+0x45/0x80 [ 14.204149] [<ffffffff8140af91>] sock_sendmsg+0xf1/0x110 [ 14.204189] [<ffffffff8140dc6c>] sys_sendmsg+0x20c/0x380 [ 14.204233] [<ffffffff8100ad82>] system_call_fastpath+0x16/0x1b While current linux-2.6 kernel doesnt emit this warning, bug is latent and might cause unexpected failures. ip_dev_loopback_xmit() runs in process context, preemption enabled, so must call netif_rx_ni() instead of netif_rx(), to make sure that we process pending software interrupt. Same change for ip6_dev_loopback_xmit() Reported-by: Eric Paris <eparis@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | net: dev_pick_tx() fixEric Dumazet2010-04-151-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When dev_pick_tx() caches tx queue_index on a socket, we must check socket dst_entry matches skb one, or risk a crash later, as reported by Denys Fedorysychenko, if old packets are in flight during a route change, involving devices with different number of queues. Bug introduced by commit a4ee3ce3 (net: Use sk_tx_queue_mapping for connected sockets) Reported-by: Denys Fedorysychenko <nuclearcat@nuclearcat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | fib: suppress lockdep-RCU false positive in FIB trie.Eric Dumazet2010-04-151-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Followup of commit 634a4b20 Allow tnode_get_child_rcu() to be called either under rcu_read_lock() protection or with RTNL held. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | tun: orphan an skb on txMichael S. Tsirkin2010-04-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following situation was observed in the field: tap1 sends packets, tap2 does not consume them, as a result tap1 can not be closed. This happens because tun/tap devices can hang on to skbs undefinitely. As noted by Herbert, possible solutions include a timeout followed by a copy/change of ownership of the skb, or always copying/changing ownership if we're going into a hostile device. This patch implements the second approach. Note: one issue still remaining is that since skbs keep reference to tun socket and tun socket has a reference to tun device, we won't flush backlog, instead simply waiting for all skbs to get transmitted. At least this is not user-triggerable, and this was not reported in practice, my assumption is other devices besides tap complete an skb within finite time after it has been queued. A possible solution for the second issue would not to have socket reference the device, instead, implement dev->destructor for tun, and wait for all skbs to complete there, but this needs some thought, probably too risky for 2.6.34. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Yan Vugenfirer <yvugenfi@redhat.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | forcedeth: fix tx limit2 flag checkAyaz Abdulla2010-04-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a fix for bug 572201 @ bugs.debian.org This patch fixes the TX_LIMIT feature flag. The previous logic check for TX_LIMIT2 also took into account a device that only had TX_LIMIT set. Reported-by: Stephen Mulcahu <stephen.mulcahy@deri.org> Reported-by: Ben Huchings <ben@decadent.org.uk> Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | Merge branch 'drm-linus' of ↵Linus Torvalds2010-04-1918-19/+139
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add FireMV 2400 PCI ID. drm/radeon/kms: allow R500 regs VAP_ALT_NUM_VERTICES and VAP_INDEX_OFFSET drivers/gpu/radeon: Add MSPOS regs to safe list. drm/radeon/kms: disable the tv encoder when tv/cv is not in use drm/radeon/kms: adjust pll settings for tv drm/radeon/kms: fix tv dac conflict resolver drm/radeon/kms/evergreen: don't enable hdmi audio stuff drm/radeon/kms/atom: fix dual-link DVI on DCE3.2/4.0 drm/radeon/kms: fix rs600 tlb flush drm/radeon/kms: print GPU family and device id when loading drm/radeon/kms: fix calculation of mipmapped 3D texture sizes drm/radeon/kms: only change mode when coherent value changes. drm/radeon/kms: more atom parser fixes (v2)
| * | | | | drm/radeon/kms: add FireMV 2400 PCI ID.Dave Airlie2010-04-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an M24/X600 chip. From RH# 581927 cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms: allow R500 regs VAP_ALT_NUM_VERTICES and VAP_INDEX_OFFSETMarek Olšák2010-04-195-6/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [airlied: fix V_A_N_V to not be safe and fix check to make sure only r500 - bump userspace version] Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drivers/gpu/radeon: Add MSPOS regs to safe list.Corbin Simpson2010-04-194-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Permits MSAA and D3D-style rasterization. [airlied: add rs600] Signed-off-by: Corbin Simpson <MostAwesomeDude@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms: disable the tv encoder when tv/cv is not in useAlex Deucher2010-04-191-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switching between TV and VGA caused VGA to break on some systems since the TV encoder was left enabled when VGA was used. fixes fdo bug 25520. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms: adjust pll settings for tvAlex Deucher2010-04-191-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | May fix fdo bug 26582. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms: fix tv dac conflict resolverAlex Deucher2010-04-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On systems with the tv dac shared between DVI and TV, we can only use the dac for one of the connectors. However, when using a digital monitor on the DVI port, you can use the dac for the TV connector just fine. Check the use_digital status when resolving the conflict. Fixes fdo bug 27649, possibly others. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms/evergreen: don't enable hdmi audio stuffAlex Deucher2010-04-192-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms/atom: fix dual-link DVI on DCE3.2/4.0Alex Deucher2010-04-191-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Got broken during the evergreen merge. Fixes fdo bug 27001. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms: fix rs600 tlb flushJerome Glisse2010-04-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Typo in in flush leaded to no flush of the RS600 tlb which ultimately leaded to massive system ram corruption, with this patch everythings seems to work properly. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms: print GPU family and device id when loadingJerome Glisse2010-04-192-2/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will help figuring out GPU when looking at bugs log. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms: fix calculation of mipmapped 3D texture sizesMarek Olšák2010-04-121-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 3rd dimension should be minified too. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms: only change mode when coherent value changes.Dave Airlie2010-04-121-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On X startup we were getting a flicker where there shouldn't have been one. the X DDX calls the kernel to set the properties to the same values (yes it could be smarter), however the kernel was doing a pointless modeset then, making my nice smooth boot ugly. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | drm/radeon/kms: more atom parser fixes (v2)Alex Deucher2010-04-101-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | shr/shl ops need the full dst rather than the pre-masked version. Fixes fdo bug 27478 and kernel bug 15738. v2: remove some unsed vars, add comments Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | | | | | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-04-1913-68/+251
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 5974/1: arm/mach-at91 Makefile: remove two blanks. ARM: 6052/1: kdump: make kexec work in interrupt context ARM: 6051/1: VFP: preserve the HW context when calling signal handlers ARM: 6050/1: VFP: fix the SMP versions of vfp_{sync,flush}_hwstate ARM: 6007/1: fix highmem with VIPT cache and DMA ARM: 5975/1: AT91 slow-clock suspend: don't wait when turning PLLs off
| * | | | | | ARM: 5974/1: arm/mach-at91 Makefile: remove two blanks.Ernst Schwab2010-04-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cosmetic change to mach-at91 Makefile: remove two blanks introduced by earlier patches. Signed-off-by: Ernst Schwab <eschwab@online.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | | ARM: 6052/1: kdump: make kexec work in interrupt contextMika Westerberg2010-04-141-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When crash happens in interrupt context there is no userspace context. We always use current->active_mm in those cases. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | | ARM: 6051/1: VFP: preserve the HW context when calling signal handlersImre Deak2010-04-143-17/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Imre Deak <imre.deak@nokia.com> Signal handlers can use floating point, so prevent them to corrupt the main thread's VFP context. So far there were two signal stack frame formats defined based on the VFP implementation, but the user struct used for ptrace covers all posibilities, so use it for the signal stack too. Introduce also a new user struct for VFP exception registers. In this too fields not relevant to the current VFP architecture are ignored. Support to save / restore the exception registers was added by Will Deacon. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 19:55:25 +0100