summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'imx/fixes' into next/fixesArnd Bergmann2011-10-304-7/+8
|\
| * ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'Paul Bolle2011-10-251-1/+1
| | | | | | | | | | Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: i.MX28: shift frac value in _CLK_SET_RATEMatt Burtch2011-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Noticed when setting SSP0 in clk_set_rate, _CLK_SET_RATE attempts to reset the clock divider for the SSP0 parent clock, in this case IO0FRAC. Bits 24-29 of HW_CLKCTRL_FRAC0 are cleared correctly, but when the new frac value is written the value isn't shifted up to write the correct bit-field. This results in IO0FRAC being set to 0 and CPUFRAC being corrupted. This should occur when writing IO1FRAC, EMIFRAC in HW_CLKCTRL_FRAC0 and GPMIFRAC, HSADCFRAC in HW_CLKCTRL_FRAC1. Tested on custom i.MX28 board with SSP0 SPI driver. Signed-off-by: Matt Burtch <matt@grid-net.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desiredPaul Fertser2011-10-251-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To configure pads during the initialisation a set of special constants is used, e.g. #define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP) The problem is that no pull-up/down is getting activated unless both PAD_CTL_PUE (pull-up enable) and PAD_CTL_PKE (pull/keeper module enable) set. This is clearly stated in the i.MX25 datasheet and is confirmed by the measurements on hardware. This leads to some rather hard to understand bugs such as misdetecting an absent ethernet PHY (a real bug i had), unstable data transfer etc. This might affect mx25, mx35, mx50, mx51 and mx53 SoCs. It's reasonable to expect that if the pullup value is specified, the intention was to have it actually active, so we implicitly add the needed bits. Cc: stable@kernel.org Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: mx31pdk: Fix build by passing IMX_HAVE_PLATFORM_MXC_MMCFabio Estevam2011-09-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx31pdk target fails to build: CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 arch/arm/mach-imx/built-in.o: In function `mx31_3ds_init': mach-mx31_3ds.c:(.init.text+0x548): undefined reference to `imx_add_mxc_mmc' mach-mx31_3ds.c:(.init.text+0x69c): undefined reference to `imx31_mxc_mmc_data' make: *** [.tmp_vmlinux1] Error Fix this by passsing IMX_HAVE_PLATFORM_MXC_MMC option. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * MX5: fix clock usageArnaud Patard (Rtp)2011-08-271-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While suspending, we're enabling a clock in ->suspend() but we're in atomic context, leading to this : [30803.667305] PM: late suspend of devices complete after 1.237 msecs [30803.667449] BUG: sleeping function called from invalid context at kernel/mutex.c:271 [30803.667464] in_atomic(): 0, irqs_disabled(): 128, pid: 4941, name: pm-suspend [30803.667474] INFO: lockdep is turned off. [30803.667483] irq event stamp: 0 [30803.667489] hardirqs last enabled at (0): [< (null)>] (null) [30803.667503] hardirqs last disabled at (0): [<c001e4a8>] copy_process.part.48+0x1e0/0xa7c [30803.667543] softirqs last enabled at (0): [<c001e4a8>] copy_process.part.48+0x1e0/0xa7c [30803.667562] softirqs last disabled at (0): [< (null)>] (null) [30803.667574] Backtrace: [30803.667611] [<c0010e00>] (dump_backtrace+0x0/0x110) from [<c0424c00>] (dump_stack+0x18/0x1c) [30803.667624] r6:00000000 r5:00000000 r4:d9648000 r3:d9648000 [30803.667652] [<c0424be8>] (dump_stack+0x0/0x1c) from [<c0424eec>] (__might_sleep.part.101+0x90/0xa8) [30803.667673] [<c0424e5c>] (__might_sleep.part.101+0x0/0xa8) from [<c001a5c4>] (__might_sleep+0x80/0x94) [30803.667686] r4:c05d58c0 [30803.667705] [<c001a544>] (__might_sleep+0x0/0x94) from [<c043230c>] (mutex_lock_nested+0x2c/0x30c) [30803.667735] [<c04322e0>] (mutex_lock_nested+0x0/0x30c) from [<c0017834>] (clk_enable+0x28/0x50) [30803.667747] r8:c0438464 r7:00000003 r6:00000000 r5:00000000 r4:c05d2e98 [30803.667780] [<c001780c>] (clk_enable+0x0/0x50) from [<c0017260>] (mx5_suspend_enter+0x1c/0x98) [30803.667792] r4:00000003 r3:c060dfe0 [30803.667821] [<c0017244>] (mx5_suspend_enter+0x0/0x98) from [<c0059b48>] (suspend_enter+0xec/0x15c) [30803.667833] r4:00000003 r3:c0017244 [30803.667856] [<c0059a5c>] (suspend_enter+0x0/0x15c) from [<c0059c4c>] (suspend_devices_and_enter+0x94/0x130) [30803.667868] r6:00000000 r5:00000003 r4:c0c0af00 r3:00002710 [30803.667897] [<c0059bb8>] (suspend_devices_and_enter+0x0/0x130) from [<c0059db0>] (enter_state+0xc8/0x130) [30803.667909] r6:00000000 r5:00000003 r4:c05286e4 [30803.667934] [<c0059ce8>] (enter_state+0x0/0x130) from [<c00592d4>] (state_store+0xac/0xc0) [30803.667945] r6:00000003 r5:00000003 r4:df39d000 r3:00000003 [30803.667978] [<c0059228>] (state_store+0x0/0xc0) from [<c01b0100>] (kobj_attr_store+0x1c/0x28) [30803.668009] [<c01b00e4>] (kobj_attr_store+0x0/0x28) from [<c00e435c>] (sysfs_write_file+0x88/0xbc) [30803.668032] [<c00e42d4>] (sysfs_write_file+0x0/0xbc) from [<c0091fa0>] (vfs_write+0xbc/0x138) [30803.668051] [<c0091ee4>] (vfs_write+0x0/0x138) from [<c0092204>] (sys_write+0x44/0x70) [30803.668062] r8:00000000 r7:00000004 r6:00000003 r5:002694d0 r4:d966acc0 [30803.668094] [<c00921c0>] (sys_write+0x0/0x70) from [<c000db00>] (ret_fast_syscall+0x0/0x3c) [30803.668106] r9:d9648000 r8:c000dcc4 r6:00000001 r5:002694d0 r4:00000003 [30803.669927] PM: early resume of devices complete after 0.972 msecs Just move the clk_enable/disable in ->prepare() and ->finish() Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'fixes' into next/fixesArnd Bergmann2011-10-087-16/+224
|\ \
| * \ Merge branch 'omap/fixes' into fixesArnd Bergmann2011-10-075-15/+9
| |\ \
| | * | ARM: OMAP: irq: loop counter fix in omap_init_irq()Tapani Utriainen2011-10-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes bug where variable i was redundantly used for counting two nested loops. Signed-off-by: Tapani Utriainen <tapani@technexion.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP4: Keyboard: Fix section mismatch in the board fileBjarne Steinsbo2011-10-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `keypad_pads' is referred to by `keypad_data' which is not __initdata, so `keypad_pads' should not be __initdata either. Signed-off-by: Bjarne Steinsbo <bsteinsbo@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: musb: Remove a redundant omap4430_phy_init call in usb_musb_initAxel Lin2011-09-301-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code calls omap4430_phy_init() twice in usb_musb_init(). Calling omap4430_phy_init() once is enough. This patch removes the first omap4430_phy_init() call, which using an uninitialized pointer as parameter. This patch elimates below build warning: arch/arm/mach-omap2/usb-musb.c: In function 'usb_musb_init': arch/arm/mach-omap2/usb-musb.c:141: warning: 'dev' may be used uninitialized in this function Signed-off-by: Axel Lin <axel.lin@gmail.com> Bjarne Steinsbo <bsteinsbo@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: Fix i2c init for twl4030Tony Lindgren2011-09-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Looks like 2600 kHz rate does not work reliably on 2430, so just use the 100 kHz rate. Otherwise the system often fails to boot properly with: omap_i2c omap_i2c.2: timeout waiting for bus ready omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages twl: clock init err [-110] omap_i2c omap_i2c.2: timeout waiting for bus ready twl: i2c_write failed to transfer all messages TWL4030 Unable to unlock IDCODE registers --110 Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP4: MMC: fix power and audio issue, decouple USBC1 from MMC1Bryan Buckley2011-09-301-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove OMAP4_USBC1_ICUSB_PWRDNZ_MASK during enable/disable PWRDNZ mode for MMC1_PBIAS and associated extended-drain MMC1 I/O cell. This is in accordance with the control module programming guide. This fixes a bug where if trying to use gpio_98 or gpio_99 and MMC1 at the same time the GPIO signal will be affected by a changing SDMMC1_VDDS. Software must keep MMC1_PBIAS cell and MMC1_IO cell PWRDNZ signals low whenever SDMMC1_VDDS ramps up/down or changes for cell protection purposes. MMC1 is based on SDMMC1_VDDS whereas USBC1 is based on SIM_VDDS therefore they can operate independently. Signed-off-by: Bryan Buckley <bryan.buckley@ti.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Tested-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | ARM: at91: add defconfig for at91sam9g45 familyNicolas Ferre2011-10-071-0/+214
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Defconfig file for at91sam9g45 SoC family: at91sam9g45, at91sam9g46, at91sam9m10, at91sam9m11. The Atmel Evaluation Kit for this family is the at91sam9m10g45ek. It is so useful for automatic compile tests... Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | | ARM: at91: remove dependency for Atmel PWM driver selector in KconfigNicolas Ferre2011-10-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove dependency line which was not including the SAM9G45. [arnd: added dependency on HAVE_CLK to avoid breaking other machines] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | ARM: mach-ux500: enable fix for ARM errata 754322srinidhi kasagar2011-10-071-0/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | This applies ARM errata fix 754322 for all ux500 platforms. Cc: stable@kernel.org Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | Merge branch 'imx/fixes' into next/fixesArnd Bergmann2011-10-08170-977/+1206
|\ \ \
| * | | ARM: mx5: fix clock usage for suspendArnaud Patard (Rtp)2011-10-081-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While suspending, we're enabling a clock in ->suspend() but we're in atomic context, leading to this : [30803.667305] PM: late suspend of devices complete after 1.237 msecs [30803.667449] BUG: sleeping function called from invalid context at kernel/mutex.c:271 [30803.667464] in_atomic(): 0, irqs_disabled(): 128, pid: 4941, name: pm-suspend [30803.667474] INFO: lockdep is turned off. [30803.667483] irq event stamp: 0 [30803.667489] hardirqs last enabled at (0): [< (null)>] (null) [30803.667503] hardirqs last disabled at (0): [<c001e4a8>] copy_process.part.48+0x1e0/0xa7c [30803.667543] softirqs last enabled at (0): [<c001e4a8>] copy_process.part.48+0x1e0/0xa7c [30803.667562] softirqs last disabled at (0): [< (null)>] (null) [30803.667574] Backtrace: [30803.667611] [<c0010e00>] (dump_backtrace+0x0/0x110) from [<c0424c00>] (dump_stack+0x18/0x1c) [30803.667624] r6:00000000 r5:00000000 r4:d9648000 r3:d9648000 [30803.667652] [<c0424be8>] (dump_stack+0x0/0x1c) from [<c0424eec>] (__might_sleep.part.101+0x90/0xa8) [30803.667673] [<c0424e5c>] (__might_sleep.part.101+0x0/0xa8) from [<c001a5c4>] (__might_sleep+0x80/0x94) [30803.667686] r4:c05d58c0 [30803.667705] [<c001a544>] (__might_sleep+0x0/0x94) from [<c043230c>] (mutex_lock_nested+0x2c/0x30c) [30803.667735] [<c04322e0>] (mutex_lock_nested+0x0/0x30c) from [<c0017834>] (clk_enable+0x28/0x50) [30803.667747] r8:c0438464 r7:00000003 r6:00000000 r5:00000000 r4:c05d2e98 [30803.667780] [<c001780c>] (clk_enable+0x0/0x50) from [<c0017260>] (mx5_suspend_enter+0x1c/0x98) [30803.667792] r4:00000003 r3:c060dfe0 [30803.667821] [<c0017244>] (mx5_suspend_enter+0x0/0x98) from [<c0059b48>] (suspend_enter+0xec/0x15c) [30803.667833] r4:00000003 r3:c0017244 [30803.667856] [<c0059a5c>] (suspend_enter+0x0/0x15c) from [<c0059c4c>] (suspend_devices_and_enter+0x94/0x130) [30803.667868] r6:00000000 r5:00000003 r4:c0c0af00 r3:00002710 [30803.667897] [<c0059bb8>] (suspend_devices_and_enter+0x0/0x130) from [<c0059db0>] (enter_state+0xc8/0x130) [30803.667909] r6:00000000 r5:00000003 r4:c05286e4 [30803.667934] [<c0059ce8>] (enter_state+0x0/0x130) from [<c00592d4>] (state_store+0xac/0xc0) [30803.667945] r6:00000003 r5:00000003 r4:df39d000 r3:00000003 [30803.667978] [<c0059228>] (state_store+0x0/0xc0) from [<c01b0100>] (kobj_attr_store+0x1c/0x28) [30803.668009] [<c01b00e4>] (kobj_attr_store+0x0/0x28) from [<c00e435c>] (sysfs_write_file+0x88/0xbc) [30803.668032] [<c00e42d4>] (sysfs_write_file+0x0/0xbc) from [<c0091fa0>] (vfs_write+0xbc/0x138) [30803.668051] [<c0091ee4>] (vfs_write+0x0/0x138) from [<c0092204>] (sys_write+0x44/0x70) [30803.668062] r8:00000000 r7:00000004 r6:00000003 r5:002694d0 r4:d966acc0 [30803.668094] [<c00921c0>] (sys_write+0x0/0x70) from [<c000db00>] (ret_fast_syscall+0x0/0x3c) [30803.668106] r9:d9648000 r8:c000dcc4 r6:00000001 r5:002694d0 r4:00000003 [30803.669927] PM: early resume of devices complete after 0.972 msecs Just move the clk_enable/disable in ->prepare() and ->finish() Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
| * | | Linux 3.1-rc9v3.1-rc9Linus Torvalds2011-10-051-1/+1
| | | |
| * | | Merge git://github.com/davem330/netLinus Torvalds2011-10-0415-82/+100
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://github.com/davem330/net: pch_gbe: Fixed the issue on which a network freezes pch_gbe: Fixed the issue on which PC was frozen when link was downed. make PACKET_STATISTICS getsockopt report consistently between ring and non-ring net: xen-netback: correctly restart Tx after a VM restore/migrate bonding: properly stop queuing work when requested can bcm: fix incomplete tx_setup fix RDSRDMA: Fix cleanup of rds_iw_mr_pool net: Documentation: Fix type of variables ibmveth: Fix oops on request_irq failure ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket cxgb4: Fix EEH on IBM P7IOC can bcm: fix tx_setup off-by-one errors MAINTAINERS: tehuti: Alexander Indenbaum's address bounces dp83640: reduce driver noise ptp: fix L2 event message recognition
| | * | | pch_gbe: Fixed the issue on which a network freezesToshiharu Okada2011-10-031-29/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pch_gbe driver has an issue which a network stops, when receiving traffic is high. In the case, The link down and up are necessary to return a network. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | pch_gbe: Fixed the issue on which PC was frozen when link was downed.Toshiharu Okada2011-10-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a link was downed during network use, there is an issue on which PC freezes. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | make PACKET_STATISTICS getsockopt report consistently between ring and non-ringWillem de Bruijn2011-10-031-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a minor change. Up until kernel 2.6.32, getsockopt(fd, SOL_PACKET, PACKET_STATISTICS, ...) would return total and dropped packets since its last invocation. The introduction of socket queue overflow reporting [1] changed drop rate calculation in the normal packet socket path, but not when using a packet ring. As a result, the getsockopt now returns different statistics depending on the reception method used. With a ring, it still returns the count since the last call, as counts are incremented in tpacket_rcv and reset in getsockopt. Without a ring, it returns 0 if no drops occurred since the last getsockopt and the total drops over the lifespan of the socket otherwise. The culprit is this line in packet_rcv, executed on a drop: drop_n_acct: po->stats.tp_drops = atomic_inc_return(&sk->sk_drops); As it shows, the new drop number it taken from the socket drop counter, which is not reset at getsockopt. I put together a small example that demonstrates the issue [2]. It runs for 10 seconds and overflows the queue/ring on every odd second. The reported drop rates are: ring: 16, 0, 16, 0, 16, ... non-ring: 0, 15, 0, 30, 0, 46, 0, 60, 0 , 74. Note how the even ring counts monotonically increase. Because the getsockopt adds tp_drops to tp_packets, total counts are similarly reported cumulatively. Long story short, reinstating the original code, as the below patch does, fixes the issue at the cost of additional per-packet cycles. Another solution that does not introduce per-packet overhead is be to keep the current data path, record the value of sk_drops at getsockopt() at call N in a new field in struct packetsock and subtract that when reporting at call N+1. I'll be happy to code that, instead, it's just more messy. [1] http://patchwork.ozlabs.org/patch/35665/ [2] http://kernel.googlecode.com/files/test-packetsock-getstatistics.c Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | net: xen-netback: correctly restart Tx after a VM restore/migrateDavid Vrabel2011-10-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a VM is saved and restored (or migrated) the netback driver will no longer process any Tx packets from the frontend. xenvif_up() does not schedule the processing of any pending Tx requests from the front end because the carrier is off. Without this initial kick the frontend just adds Tx requests to the ring without raising an event (until the ring is full). This was caused by 47103041e91794acdbc6165da0ae288d844c820b (net: xen-netback: convert to hw_features) which reordered the calls to xenvif_up() and netif_carrier_on() in xenvif_connect(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | bonding: properly stop queuing work when requestedAndy Gospodarek2011-10-033-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During a test where a pair of bonding interfaces using ARP monitoring were both brought up and torn down (with an rmmod) repeatedly, a panic in the timer code was noticed. I tracked this down and determined that any of the bonding functions that ran as workqueue handlers and requeued more work might not properly exit when the module was removed. There was a flag protected by the bond lock called kill_timers that is set when the interface goes down or the module is removed, but many of the functions that monitor link status now unlock the bond lock to take rtnl first. There is a chance that another CPU running the rmmod could get the lock and set kill_timers after the first check has passed. This patch does not allow any function to queue work that will make itself run unless kill_timers is not set. I also noticed while doing this work that bond_resend_igmp_join_requests did not have a check for kill_timers, so I added the needed call there as well. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reported-by: Liang Zheng <lzheng@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | can bcm: fix incomplete tx_setup fixOliver Hartkopp2011-09-291-27/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit aabdcb0b553b9c9547b1a506b34d55a764745870 ("can bcm: fix tx_setup off-by-one errors") fixed only a part of the original problem reported by Andre Naujoks. It turned out that the original code needed to be re-ordered to reduce complexity and to finally fix the reported frame counting issues. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | RDSRDMA: Fix cleanup of rds_iw_mr_poolJonathan Lallinger2011-09-291-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the rds_iw_mr_pool struct the free_pinned field keeps track of memory pinned by free MRs. While this field is incremented properly upon allocation, it is never decremented upon unmapping. This would cause the rds_rdma module to crash the kernel upon unloading, by triggering the BUG_ON in the rds_iw_destroy_mr_pool function. This change keeps track of the MRs that become unpinned, so that free_pinned can be decremented appropriately. Signed-off-by: Jonathan Lallinger <jonathan@ogc.us> Signed-off-by: Steve Wise <swise@ogc.us> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | net: Documentation: Fix type of variablesRoy.Li2011-09-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | ibmveth: Fix oops on request_irq failureBrian King2011-09-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If request_irq fails, the ibmveth driver will overwrite the rc and end up returning a successful rc on its open function, resulting in an oops later when a packet gets sent and buffers are not allocated due to the failed open. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socketYan, Zheng2011-09-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipv6_ac_list and ipv6_fl_list from listening socket are inadvertently shared with new socket created for connection. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | cxgb4: Fix EEH on IBM P7IOCDivy Le Ray2011-09-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix EEH recovery on new P Series platform by requesting fundamental reset. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | can bcm: fix tx_setup off-by-one errorsOliver Hartkopp2011-09-291-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes two off-by-one errors that canceled each other out. Checking for the same condition two times in bcm_tx_timeout_tsklet() reduced the count of frames to be sent by one. This did not show up the first time tx_setup is invoked as an additional frame is sent due to TX_ANNONCE. Invoking a second tx_setup on the same item led to a reduced (by 1) number of sent frames. Reported-by: Andre Naujoks <nautsch@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | MAINTAINERS: tehuti: Alexander Indenbaum's address bouncesIan Campbell2011-09-291-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I got: Generating server: Tehuti.onmicrosoft.com baum@tehutinetworks.net #< #5.1.1 smtp;550 5.1.1 RESOLVER.ADR.RecipNotFound; not found> #SMTP# Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Alexander Indenbaum <baum@tehutinetworks.net> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | dp83640: reduce driver noiseRichard Cochran2011-09-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver has two warning messages that might be triggered by normal use cases. When they appear, the messages give the impression of a never ending series of errors. This commit changes them to debug messages instead. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | ptp: fix L2 event message recognitionRichard Cochran2011-09-291-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IEEE 1588 standard defines two kinds of messages, event and general messages. Event messages require time stamping, and general do not. When using UDP transport, two separate ports are used for the two message types. The BPF designed to recognize event messages incorrectly classifies L2 general messages as event messages. This commit fixes the issue by extending the filter to check the message type field for L2 PTP packets. Event messages are be distinguished from general messages by testing the "general" bit. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | Merge branch 'fix/asoc' of git://github.com/tiwai/soundLinus Torvalds2011-10-044-8/+8
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'fix/asoc' of git://github.com/tiwai/sound: ASoC: omap_mcpdm_remove cannot be __devexit ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC ASoC: use a valid device for dev_err() in Zylonite
| | * | | | ASoC: omap_mcpdm_remove cannot be __devexitArnd Bergmann2011-10-022-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap_mcpdm_remove is used from asoc_mcpdm_probe, which is an initcall, and must not be discarded when HOTPLUG is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * | | | ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADCAxel Lin2011-10-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code set update bits for WM8753_LDAC and WM8753_RDAC twice, but missed setting update bits for WM8753_LADC and WM8753_RADC. I think it is a copy-paste bug in commit 776065 "ASoC: codecs: wm8753: Fix register cache incoherency". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| | * | | | ASoC: use a valid device for dev_err() in ZyloniteArnd Bergmann2011-10-021-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recent conversion has introduced references to &pdev->dev, which does not actually exist in all the contexts it's used in. Replace this with card->dev where necessary, in order to let the driver build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
| * | | | | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2011-10-046-158/+33
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix channel_remap setup (v2) drm/radeon: Set cursor x/y to 0 when x/yorigin > 0. drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation. drm/radeon: Simplify cursor x/yorigin calculation. drm/radeon/kms: fix cursor image off-by-one error drm/radeon/kms: Fix logic error in DP HPD handler drm/radeon/kms: add retry limits for native DP aux defer drm/radeon/kms: fix regression in DP aux defer handling
| | * | | | | drm/radeon/kms: fix channel_remap setup (v2)Alex Deucher2011-10-043-127/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most asics just use the hw default value which requires no explicit programming. For those that need a different value, the vbios will program it properly. As such, there's no need to program these registers explicitly in the driver. Changing MC_SHARED_CHREMAP requires a reload of all data in vram otherwise its contents will be scambled. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=40103 v2: drop now unused channel_remap functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | | | | drm/radeon: Set cursor x/y to 0 when x/yorigin > 0.Michel Dänzer2011-10-031-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apart from the obvious cleanup, this should make the line cursor_end = x - xorigin + w; correct now. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | | | | drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.Michel Dänzer2011-10-031-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes cursor disappearing prematurely when moving off a top/left edge which is not located at the desktop top/left edge. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | | | | drm/radeon: Simplify cursor x/yorigin calculation.Michel Dänzer2011-10-031-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | | | | drm/radeon/kms: fix cursor image off-by-one errorNicholas Miell2011-10-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mouse cursor hotspot calculation when the cursor is partially off the top or left side of the screen was off by one. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=41158 Signed-off-by: Nicholas Miell <nmiell@gmail.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | | | | drm/radeon/kms: Fix logic error in DP HPD handlerAlex Deucher2011-10-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only disable the pipe if the monitor is physically disconnected. The previous logic also disabled the pipe if the link was trained. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41248 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | | | | drm/radeon/kms: add retry limits for native DP aux deferAlex Deucher2011-10-031-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous code could potentially loop forever. Limit the number of DP aux defer retries to 4 for native aux transactions, same as i2c over aux transactions. Noticed by: Brad Campbell <lists2009@fnarfbargle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <lists2009@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | | | | drm/radeon/kms: fix regression in DP aux defer handlingAlex Deucher2011-10-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An incorrect ordering in the error checking code lead to DP aux defer being skipped in the aux native write path. Move the bytes transferred check (ret == 0) below the defer check. Tracked down by: Brad Campbell <brad@fnarfbargle.com> Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41121 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <brad@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2011-10-041-27/+66
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi-topcliff-pch: Fix overrun issue spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs spi-topcliff-pch: Fix CPU read complete condition issue spi-topcliff-pch: Fix SSN Control issue spi-topcliff-pch: add tx-memory clear after complete transmitting
| | * | | | | | spi-topcliff-pch: Fix overrun issueTomoya MORINAGA2011-10-041-5/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We found that adding load, Rx data sometimes drops.(with DMA transfer mode) The cause is that before starting Rx-DMA processing, Tx-DMA processing starts. This causes FIFO overrun occurs. This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor size like below. Current this patch Rx-descriptor 4Byte+12Byte*341 --> 12Byte*340-4Byte-12Byte Rx-threshold (Not modified) Tx-descriptor 4Byte+12Byte*341 --> 16Byte-12Byte*340 Rx-threshold 12Byte --> 2Byte Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-19 18:18:45 +0100