summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel-doc/rst: change the output layoutJani Nikula2016-05-301-17/+17
| | | | | | | | | | | | | | | | Move away from field lists, and simply use **strong emphasis** for section headings on lines of their own. Do not use rst section headings, because their nesting depth depends on the surrounding context, which kernel-doc has no knowledge of. Also, they do not need to end up in any table of contexts or indexes. There are two related immediate benefits. Field lists are typically rendered in two columns, while the new style uses the horizontal width better. With no extra indent on the left, there's no need to be as fussy about it. Field lists are more susceptible to indentation problems than the new style. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc: strip leading blank lines from inline doc commentsJani Nikula2016-05-301-0/+4
| | | | | | | | The inline member markup allows whitespace lines before the actual documentation starts. Strip the leading blank lines. This improves the rst output. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc/rst: blank lines in output are not neededJani Nikula2016-05-301-6/+1
| | | | | | Current approach leads to two blank lines, while one is enough. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc: fix wrong code indentationJani Nikula2016-05-301-1/+1
| | | | | | No functional changes. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc: do not regard $, %, or & prefixes as special in section namesJani Nikula2016-05-301-12/+2
| | | | | | | | | | | | The use of these is confusing in the script, and per this grep, they're not used anywhere anyway: $ git grep " \* [%$&][a-zA-Z0-9_]*:" -- *.[ch] | grep -v "\$\(Id\|Revision\|Date\)" While at it, throw out the constants array, nothing is ever put there again. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc/rst: highlight function/struct/enum purpose lines tooJani Nikula2016-05-301-12/+25
| | | | | | | Let the user use @foo, &bar, %baz, etc. in the first kernel-doc purpose line too. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc/rst: drop redundant unescape in highlightingJani Nikula2016-05-301-1/+0
| | | | | | This bit is already done by xml_unescape() above. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc/rst: add support for struct/union/enum member referencesJani Nikula2016-05-301-0/+5
| | | | | | | | | Link "&foo->bar", "&foo->bar()", "&foo.bar", and "&foo.bar()" to the struct/union/enum foo definition. The members themselves do not currently have anchors to link to, but this is better than nothing, and promotes a universal notation. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc/rst: add support for &union foo and &typedef foo referencesJani Nikula2016-05-301-0/+4
| | | | | | | | | Let the user use "&union foo" and "&typedef foo" to reference foo. The difference to using "union &foo", "typedef &foo", or just "&foo" (which are valid too) is that "union" and "typedef" become part of the link text. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc/rst: &foo references are more universal than structsJani Nikula2016-05-301-1/+2
| | | | | | | It's possible to use &foo to reference structs, enums, typedefs, etc. in the Sphinx C domain. Thus do not prefix the links with "struct". Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc/rst: reference functions according to C domain specJani Nikula2016-05-301-1/+1
| | | | | | | The Sphinx C domain spec says function references should include the parens (). Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc/rst: do not output DOC: section titles for requested onesJani Nikula2016-05-301-1/+3
| | | | | | | | | If the user requests a specific DOC: section by name, do not output its section title. In these cases, the surrounding context already has a heading, and the DOC: section title is only used as an identifier and a heading for clarity in the source file. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc: add names for output selectionJani Nikula2016-05-301-17/+30
| | | | | | | | | | Make the output selection a bit more readable by adding constants for the various types of output selection. While at it, actually call the variable for choosing what to output $output_selection. No functional changes. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc: add names for states and substatesJani Nikula2016-05-301-43/+48
| | | | | | | | | | Make the state machine a bit more readable by adding constants for parser states and inline member documentation parser substates. While at it, rename the "split" documentation to "inline" documentation. No functional changes. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* Documentation/sphinx: nicer referencing of struct in docbook->rst conversionJani Nikula2016-05-302-6/+14
| | | | | | Add "struct" in the label of the reference. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* sphinx: update docbook->rst conversion script match C domain specJani Nikula2016-05-301-4/+4
| | | | | | | Function references should include the parens (), struct references should not include "struct". Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* sphinx: cheesy script to convert .tmpl filesJonathan Corbet2016-05-303-0/+52
| | | | | | | | | | | | | This script uses pandoc to convert existing DocBook template files to RST templates. A couple of sed scripts are need to massage things both before and after the conversion, but the result is then usable with no hand editing. [Jani: Change usage to tmplcvt <in> <out>. Fix escaping for docproc directives. Add support the new kernel-doc extension.] Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* Documentation/sphinx: set version and release properlyJani Nikula2016-05-302-5/+26
| | | | | | | | Read the version and release from the top level Makefile (for use when Sphinx is invoked directly, by e.g. Read the Docs), but override them via Sphinx command line arguments in a normal documentation build. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* Documentation/sphinx: configure the kernel-doc extensionJani Nikula2016-05-302-3/+11
| | | | | | | | | | | | | | | | Tell Sphinx where to find the extension, and pass on the kernel src tree and kernel-doc paths to the extension. With this, any .rst files under Documentation may contain the kernel-doc rst directive to include kernel-doc documentation from any source file. While building, it may be handy to pass kernel-doc extension configuration on the command line. For example, 'make SPHINXOPTS="-D kerneldoc_verbosity=0" htmldocs' silences all stderr output from kernel-doc when the kernel-doc exit code is 0. (The stderr will be logged unconditionally when the exit code is non-zero.) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* Documentation/sphinx: add Sphinx kernel-doc directive extensionJani Nikula2016-05-301-0/+102
| | | | | | | | | | | | | | | | | | | | | | | | Add an extension to handle kernel-doc directives, to call kernel-doc according to the arguments and parameters given to the reStructuredText directive. The syntax for the kernel-doc directive is: .. kernel-doc:: FILENAME :export: :internal: :functions: FUNCTION [FUNCTION ...] :doc: SECTION TITLE Of the directive options export, internal, functions, and doc, currently only one option may be given at a time. The FILENAME is relative from the kernel source tree root. The extension notifies Sphinx about the document dependency on FILENAME, causing the document to be rebuilt when the file has been changed. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* Documentation: add .gitignoreJani Nikula2016-05-301-0/+1
| | | | | | The Sphinx output directory is generated. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* Documentation/sphinx: add basic working Sphinx configuration and buildJani Nikula2016-05-305-5/+478
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic configuration and makefile to build documentation from any .rst files under Documentation using Sphinx. For starters, there's just the placeholder index.rst. At the top level Makefile, hook Sphinx documentation targets alongside (but independent of) the DocBook toolchain, having both be run on the various 'make *docs' targets. All Sphinx processing is placed into Documentation/Makefile.sphinx. Both that and the Documentation/DocBook/Makefile are now expected to handle all the documentation targets, explicitly ignoring them if they're not relevant for that particular toolchain. The changes to the existing DocBook Makefile are kept minimal. There is graceful handling of missing Sphinx and rst2pdf (which is needed for pdf output) by checking for the tool and python module, respectively, with informative messages to the user. If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but otherwise gracefully fall back to the Sphinx default theme, with an informative message to the user, and slightly less pretty HTML output. Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available), epubdocs and xmldocs targets. The output documents are written into per output type subdirectories under Documentation/output. Finally, you can pass options to sphinx-build using the SPHINXBUILD make variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose output from Sphinx. This is based on the original work by Jonathan Corbet, but he probably wouldn't recognize this as his own anymore. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc: support printing exported and non-exported symbolsJani Nikula2016-05-301-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | Currently we use docproc to figure out which symbols are exported, and then docproc calls kernel-doc on specific functions, to get documentation on exported functions. According to git blame and docproc comments, this is due to historical reasons, as functions and their corresponding EXPORT_SYMBOL* may have been in different files. However for more than ten years the recommendation in CodingStyle has been to place the EXPORT_SYMBOL* immediately after the closing function brace line. Additionally, the kernel-doc comments for functions are generally placed above the function definition in the .c files (i.e. where the EXPORT_SYMBOL* is) rather than above the declaration in the .h files. There are some exceptions to this, but AFAICT none of these are included in DocBook documentation using the "!E" docproc directive. Therefore, assuming the EXPORT_SYMBOL* and kernel-doc are with the function definition, kernel-doc can extract the exported vs. not information by making two passes on the input file. Add support for that via the new -export and -internal parameters. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* kernel-doc/rst: fix use of uninitialized valueJani Nikula2016-05-301-1/+2
| | | | | | | | | | I'm not quite sure why the errors below are happening, but this fixes them. Use of uninitialized value in string ne at ./scripts/kernel-doc line 1819, <IN> line 6494. Use of uninitialized value $_[0] in join or string at ./scripts/kernel-doc line 1759, <IN> line 6494. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* Linux 4.7-rc1v4.7-rc1Linus Torvalds2016-05-291-3/+3
|
* hash_string: Fix zero-length case for !DCACHE_WORD_ACCESSGeorge Spelvin2016-05-291-2/+2
| | | | | | | | | | The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf22d2 ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Rename other copy of hash_string to hashlen_stringGeorge Spelvin2016-05-291-2/+2
| | | | | | | | | | | | | | | | The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by: George Spelvin <linux@sciencehorizons.net> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf22d2 ("fs/namei.c: Add hashlen_string() function") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hpfs: implement the show_options methodMikulas Patocka2016-05-291-11/+32
| | | | | | | | | | | | | | | | The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* affs: fix remount failure when there are no options changedMikulas Patocka2016-05-291-2/+3
| | | | | | | | | | | | | | | | | | | | | | Commit c8f33d0bec99 ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0bec99 ("affs: kstrdup() memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hpfs: fix remount failure when there are no options changedMikulas Patocka2016-05-291-2/+3
| | | | | | | | | | | | | | | | | | | | | | Commit ce657611baf9 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611baf9 ("hpfs: kstrdup() out of memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2016-05-2967-258/+373
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ...
| * MIPS: Add missing FROZEN hotplug notifier transitionsAnna-Maria Gleixner2016-05-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The corresponding FROZEN hotplug notifier transitions used on suspend/resume are ignored. Therefore the switch case action argument is masked with the frozen hotplug notifier transition mask. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: rt@linutronix.de Patchwork: https://patchwork.linux-mips.org/patch/13351/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Build microMIPS VDSO for microMIPS kernelsJames Hogan2016-05-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | MicroMIPS kernels may be expected to run on microMIPS only cores which don't support the normal MIPS instruction set, so be sure to pass the -mmicromips flag through to the VDSO cflags. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13349/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Fix sigreturn via VDSO on microMIPS kernelJames Hogan2016-05-281-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In microMIPS kernels, handle_signal() sets the isa16 mode bit in the vdso address so that the sigreturn trampolines (which are offset from the VDSO) get executed as microMIPS. However commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") changed the offsets to come from the VDSO image, which already have the isa16 mode bit set correctly since they're extracted from the VDSO shared library symbol table. Drop the isa16 mode bit handling from handle_signal() to fix sigreturn for cores which support both microMIPS and normal MIPS. This doesn't fix microMIPS only cores, since the VDSO is still built for normal MIPS, but thats a separate problem. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13348/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: devicetree: fix cpu interrupt controller node-namesAntony Pavlov2016-05-287-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here is the quote from [1]: The unit-address must match the first address specified in the reg property of the node. If the node has no reg property, the @ and unit-address must be omitted and the node-name alone differentiates the node from other nodes at the same level This patch adjusts MIPS dts-files and devicetree binding documentation in accordance with [1]. [1] Power.org(tm) Standard for Embedded Power Architecture(tm) Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. Chapter 2.2.1.1 Node Name Requirements Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13345/ Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: VDSO: Build with `-fno-strict-aliasing'Maciej W. Rozycki2016-05-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid an aliasing issue causing a build error in VDSO: In file included from include/linux/srcu.h:34:0, from include/linux/notifier.h:15, from ./arch/mips/include/asm/uprobes.h:9, from include/linux/uprobes.h:61, from include/linux/mm_types.h:13, from ./arch/mips/include/asm/vdso.h:14, from arch/mips/vdso/vdso.h:27, from arch/mips/vdso/gettimeofday.c:11: include/linux/workqueue.h: In function 'work_static': include/linux/workqueue.h:186:2: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing] return *work_data_bits(work) & WORK_STRUCT_STATIC; ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1 with a CONFIG_DEBUG_OBJECTS_WORK configuration and GCC 5.2.0. Include `-fno-strict-aliasing' along with compiler options used, as required for kernel code, fixing a problem present since the introduction of VDSO with commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO"). Thanks to Tejun for diagnosing this properly! Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: Tejun Heo <tj@kernel.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.3+ Patchwork: https://patchwork.linux-mips.org/patch/13357/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Pistachio: Enable KASLRMatt Redfearn2016-05-282-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow KASLR to be selected on Pistachio based systems. Tested on a Creator Ci40. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13356/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: lib: Mark intrinsics notraceHarvey Hunt2016-05-287-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On certain MIPS32 devices, the ftrace tracer "function_graph" uses __lshrdi3() during the capturing of trace data. ftrace then attempts to trace __lshrdi3() which leads to infinite recursion and a stack overflow. Fix this by marking __lshrdi3() as notrace. Mark the other compiler intrinsics as notrace in case the compiler decides to use them in the ftrace path. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: <linux-mips@linux-mips.org> Cc: <linux-kernel@vger.kernel.org> Cc: <stable@vger.kernel.org> # 4.2.x- Patchwork: https://patchwork.linux-mips.org/patch/13354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Fix 64-bit HTW configurationJames Hogan2016-05-281-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Hardware page Table Walker (HTW) is being misconfigured on 64-bit kernels. The PWSize.PS (pointer size) bit determines whether pointers within directories are loaded as 32-bit or 64-bit addresses, but was never being set to 1 for 64-bit kernels where the unsigned long in pgd_t is 64-bits wide. This actually reduces rather than improves performance when the HTW is enabled on P6600 since the HTW is initiated lots, but walks are all aborted due I think to bad intermediate pointers. Since we were already taking the width of the PTEs into account by setting PWSize.PTEW, which is the left shift applied to the page table index *in addition to* the native pointer size, we also need to reduce PTEW by 1 when PS=1. This is done by calculating PTEW based on the relative size of pte_t compared to pgd_t. Finally in order for the HTW to be used when PS=1, the appropriate XK/XS/XU bits corresponding to the different 64-bit segments need to be set in PWCtl. We enable only XU for now to enable walking for XUSeg. Supporting walking for XKSeg would be a bit more involved so is left for a future patch. It would either require the use of a per-CPU top level base directory if supported by the HTW (a bit like pgd_current but with a second entry pointing at swapper_pg_dir), or the HTW would prepend bit 63 of the address to the global directory index which doesn't really match how we split user and kernel page directories. Fixes: cab25bc7537b ("MIPS: Extend hardware table walking support to MIPS64") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13364/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Add 64-bit HTW fieldsJames Hogan2016-05-282-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add field definitions for some of the 64-bit specific Hardware page Table Walker (HTW) register fields in PWSize and PWCtl, in preparation for fixing the 64-bit HTW configuration. Also print these fields out along with the others in print_htw_config(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13363/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MAINTAINERS: Add file patterns for mips device tree bindingsGeert Uytterhoeven2016-05-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MAINTAINERS: Add file patterns for mips brcm device tree bindingsGeert Uytterhoeven2016-05-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13339/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Simplify DSP instruction encoding macrosJames Hogan2016-05-281-90/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify the DSP instruction wrapper macros which use explicit encodings for microMIPS and normal MIPS by using the new encoding macros and removing duplication. To me this makes it easier to read since it is much shorter, but it also ensures .insn is used, preventing objdump disassembling the microMIPS code as normal MIPS. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13314/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Add missing tlbinvf/XPA microMIPS encodingsJames Hogan2016-05-281-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Hardcoded MIPS instruction encodings are provided for tlbinvf, mfhc0 & mthc0 instructions, but microMIPS encodings are missing. I doubt any microMIPS cores exist at present which support these instructions, but the microMIPS encodings exist, and microMIPS cores may support them in the future. Add the missing microMIPS encodings using the new macros. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13313/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Fix little endian microMIPS MSA encodingsJames Hogan2016-05-282-62/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the toolchain doesn't support MSA we encode MSA instructions explicitly in assembly. Unfortunately we use .word for both MIPS and microMIPS encodings which is wrong, since 32-bit microMIPS instructions are made up from a pair of halfwords. - The most significant halfword always comes first, so for little endian builds the halves will be emitted in the wrong order. - 32-bit alignment isn't guaranteed, so the assembler may insert a 16-bit nop instruction to pad the instruction stream to a 32-bit boundary. Use the new instruction encoding macros to encode microMIPS MSA instructions correctly. Fixes: d96cc3d1ec5d ("MIPS: Add microMIPS MSA support.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <Paul.Burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13312/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Add missing VZ accessor microMIPS encodingsJames Hogan2016-05-281-9/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Toolchains may be used which support microMIPS but not VZ instructions (i.e. binutis 2.22 & 2.23), so extend the explicitly encoded versions of the guest COP0 register & guest TLB access macros to support microMIPS encodings too, using the new macros. This prevents non-microMIPS instructions being executed in microMIPS mode during CPU probe on cores supporting VZ (e.g. M5150), which cause reserved instruction exceptions early during boot. Fixes: bad50d79255a ("MIPS: Fix VZ probe gas errors with binutils <2.24") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13311/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Add inline asm encoding helpersJames Hogan2016-05-281-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To allow simplification of macros which use inline assembly to explicitly encode instructions, add a few simple abstractions to mipsregs.h which expand to specific microMIPS or normal MIPS encodings depending on what type of kernel is being built: _ASM_INSN_IF_MIPS(_enc) : Emit a 32bit MIPS instruction if microMIPS is not enabled. _ASM_INSN32_IF_MM(_enc) : Emit a 32bit microMIPS instruction if enabled. _ASM_INSN16_IF_MM(_enc) : Emit a 16bit microMIPS instruction if enabled. The macros can be used one after another since the MIPS / microMIPS macros are mutually exclusive, for example: __asm__ __volatile__( ".set push\n\t" ".set noat\n\t" "# mfgc0 $1, $%1, %2\n\t" _ASM_INSN_IF_MIPS(0x40610000 | %1 << 11 | %2) _ASM_INSN32_IF_MM(0x002004fc | %1 << 16 | %2 << 11) "move %0, $1\n\t" ".set pop" : "=r" (__res) : "i" (source), "i" (sel)); Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13310/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: Spelling fix lets -> let'sRalf Baechle2016-05-289-10/+10
| | | | | | | | | | | | | | As noticed by Sergei in the discussion of Andrea Gelmini's patch series. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
| * MIPS: VR41xx: Fix typoAndrea Gelmini2016-05-281-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * MIPS: oprofile: Fix typoAndrea Gelmini2016-05-281-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: rric@kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Cc: oprofile-list@lists.sf.net Patchwork: https://patchwork.linux-mips.org/patch/13334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-08 22:27:27 +0100