summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* iommu/arm-smmu-v3: Add IORT configurationLorenzo Pieralisi2016-11-292-2/+150
| | | | | | | | | | | | | | | | | | | | | | | In ACPI bases systems, in order to be able to create platform devices and initialize them for ARM SMMU v3 components, the IORT kernel implementation requires a set of static functions to be used by the IORT kernel layer to configure platform devices for ARM SMMU v3 components. Add static configuration functions to the IORT kernel layer for the ARM SMMU v3 components, so that the ARM SMMU v3 driver can initialize its respective platform device by relying on the IORT kernel infrastructure and by adding a corresponding ACPI device early probe section entry. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/arm-smmu-v3: Split probe functions into DT/generic portionsLorenzo Pieralisi2016-11-291-16/+27
| | | | | | | | | | | | | | | | | | | | | Current ARM SMMUv3 probe functions intermingle HW and DT probing in the initialization functions to detect and programme the ARM SMMU v3 driver features. In order to allow probing the ARM SMMUv3 with other firmwares than DT, this patch splits the ARM SMMUv3 init functions into DT and HW specific portions so that other FW interfaces (ie ACPI) can reuse the HW probing functions and skip the DT portion accordingly. This patch implements no functional change, only code reshuffling. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
* ACPI/IORT: Add support for ARM SMMU platform devices creationLorenzo Pieralisi2016-11-291-0/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In ARM ACPI systems, IOMMU components are specified through static IORT table entries. In order to create platform devices for the corresponding ARM SMMU components, IORT kernel code should be made able to parse IORT table entries and create platform devices dynamically. This patch adds the generic IORT infrastructure required to create platform devices for ARM SMMUs. ARM SMMU versions have different resources requirement therefore this patch also introduces an IORT specific structure (ie iort_iommu_config) that contains hooks (to be defined when the corresponding ARM SMMU driver support is added to the kernel) to be used to define the platform devices names, init the IOMMUs, count their resources and finally initialize them. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
* ACPI/IORT: Add node match functionLorenzo Pieralisi2016-11-292-0/+17
| | | | | | | | | | | | | | | | | | | | | Device drivers (eg ARM SMMU) need to know if a specific component is part of the IORT table, so that kernel data structures are not initialized at initcalls time if the respective component is not part of the IORT table. To this end, this patch adds a trivial function that allows detecting if a given IORT node type is present or not in the ACPI table, providing an ACPI IORT equivalent for of_find_matching_node(). Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
* ACPI: Implement acpi_dma_configureLorenzo Pieralisi2016-11-295-4/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On DT based systems, the of_dma_configure() API implements DMA configuration for a given device. On ACPI systems an API equivalent to of_dma_configure() is missing which implies that it is currently not possible to set-up DMA operations for devices through the ACPI generic kernel layer. This patch fills the gap by introducing acpi_dma_configure/deconfigure() calls that for now are just wrappers around arch_setup_dma_ops() and arch_teardown_dma_ops() and also updates ACPI and PCI core code to use the newly introduced acpi_dma_configure/acpi_dma_deconfigure functions. Since acpi_dma_configure() is used to configure DMA operations, the function initializes the dma/coherent_dma masks to sane default values if the current masks are uninitialized (also to keep the default values consistent with DT systems) to make sure the device has a complete default DMA set-up. The DMA range size passed to arch_setup_dma_ops() is sized according to the device coherent_dma_mask (starting at address 0x0), mirroring the DT probing path behaviour when a dma-ranges property is not provided for the device being probed; this changes the current arch_setup_dma_ops() call parameters in the ACPI probing case, but since arch_setup_dma_ops() is a NOP on all architectures but ARM/ARM64 this patch does not change the current kernel behaviour on them. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> [pci] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/arm-smmu-v3: Convert struct device of_node to fwnode usageLorenzo Pieralisi2016-11-291-5/+7
| | | | | | | | | | | | | | | | | | | | | | Current ARM SMMU v3 driver rely on the struct device.of_node pointer for device look-up and iommu_ops retrieval. In preparation for ACPI probing enablement, convert the driver to use the struct device.fwnode member for device and iommu_ops look-up so that the driver infrastructure can be used also on systems that do not associate an of_node pointer to a struct device (eg ACPI), making the device look-up and iommu_ops retrieval firmware agnostic. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/arm-smmu: Convert struct device of_node to fwnode usageLorenzo Pieralisi2016-11-291-5/+6
| | | | | | | | | | | | | | | | | | | | | | Current ARM SMMU driver rely on the struct device.of_node pointer for device look-up and iommu_ops retrieval. In preparation for ACPI probing enablement, convert the driver to use the struct device.fwnode member for device and iommu_ops look-up so that the driver infrastructure can be used also on systems that do not associate an of_node pointer to a struct device (eg ACPI), making the device look-up and iommu_ops retrieval firmware agnostic. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu: Make of_iommu_set/get_ops() DT agnosticLorenzo Pieralisi2016-11-294-41/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The of_iommu_{set/get}_ops() API is used to associate a device tree node with a specific set of IOMMU operations. The same kernel interface is required on systems booting with ACPI, where devices are not associated with a device tree node, therefore the interface requires generalization. The struct device fwnode member represents the fwnode token associated with the device and the struct it points at is firmware specific; regardless, it is initialized on both ACPI and DT systems and makes an ideal candidate to use it to associate a set of IOMMU operations to a given device, through its struct device.fwnode member pointer, paving the way for representing per-device iommu_ops (ie an iommu instance associated with a device). Convert the DT specific of_iommu_{set/get}_ops() interface to use struct device.fwnode as a look-up token, making the interface usable on ACPI systems and rename the data structures and the registration API so that they are made to represent their usage more clearly. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
* ACPI/IORT: Add support for IOMMU fwnode registrationLorenzo Pieralisi2016-11-291-0/+86
| | | | | | | | | | | | | | | | | | | The ACPI IORT table provide entries for IOMMU (aka SMMU in ARM world) components that allow creating the kernel data structures required to probe and initialize the IOMMU devices. This patch provides support in the IORT kernel code to register IOMMU components and their respective fwnode. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
* ACPI/IORT: Introduce linker section for IORT entries probingLorenzo Pieralisi2016-11-293-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit e647b532275b ("ACPI: Add early device probing infrastructure") the kernel has gained the infrastructure that allows adding linker script section entries to execute ACPI driver callbacks (ie probe routines) for all subsystems that register a table entry in the respective kernel section (eg clocksource, irqchip). Since ARM IOMMU devices data is described through IORT tables when booting with ACPI, the ARM IOMMU drivers must be made able to hook ACPI callback routines that are called to probe IORT entries and initialize the respective IOMMU devices. To avoid adding driver specific hooks into IORT table initialization code (breaking therefore code modularity - ie ACPI IORT code must be made aware of ARM SMMU drivers ACPI init callbacks), this patch adds code that allows ARM SMMU drivers to take advantage of the ACPI early probing infrastructure, so that they can add linker script section entries containing drivers callback to be executed on IORT tables detection. Since IORT nodes are differentiated by a type, the callback routines can easily parse the IORT table entries, check the IORT nodes and carry out some actions whenever the IORT node type associated with the driver specific callback is matched. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: Tomasz Nowicki <tn@semihalf.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* ACPI: Add FWNODE_ACPI_STATIC fwnode typeLorenzo Pieralisi2016-11-292-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On systems booting with a device tree, every struct device is associated with a struct device_node, that provides its DT firmware representation. The device node can be used in generic kernel contexts (eg IRQ translation, IOMMU streamid mapping), to retrieve the properties associated with the device and carry out kernel operations accordingly. Owing to the 1:1 relationship between the device and its device_node, the device_node can also be used as a look-up token for the device (eg looking up a device through its device_node), to retrieve the device in kernel paths where the device_node is available. On systems booting with ACPI, the same abstraction provided by the device_node is required to provide look-up functionality. The struct acpi_device, that represents firmware objects in the ACPI namespace already includes a struct fwnode_handle of type FWNODE_ACPI as their member; the same abstraction is missing though for devices that are instantiated out of static ACPI tables entries (eg ARM SMMU devices). Add a new fwnode_handle type to associate devices created out of static ACPI table entries to the respective firmware components and create a simple ACPI core layer interface to dynamically allocate and free the corresponding firmware nodes so that kernel subsystems can use it to instantiate the nodes and associate them with the respective devices. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Tomasz Nowicki <tn@semihalf.com> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Tested-by: Tomasz Nowicki <tn@semihalf.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/arm-smmu: Set SMTNMB_TLBEN in ACR to enable caching of bypass entriesNipun Gupta2016-11-291-9/+16
| | | | | | | | | | | | | | | | | The SMTNMB_TLBEN in the Auxiliary Configuration Register (ACR) provides an option to enable the updation of TLB in case of bypass transactions due to no stream match in the stream match table. This reduces the latencies of the subsequent transactions with the same stream-id which bypasses the SMMU. This provides a significant performance benefit for certain networking workloads. With this change substantial performance improvement of ~9% is observed with DPDK l3fwd application (http://dpdk.org/doc/guides/sample_app_ug/l3_forward.html) on NXP's LS2088a platform. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/io-pgtable-arm: Use const and __initconst for iommu_gather_ops structuresBhumika Goyal2016-11-291-1/+1
| | | | | | | | | | | | Check for iommu_gather_ops structures that are only stored in the tlb field of an io_pgtable_cfg structure. The tlb field is of type const struct iommu_gather_ops *, so iommu_gather_ops structures having this property can be declared as const. Also, replace __initdata with __initconst. Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/arm-smmu: Constify iommu_gather_ops structuresBhumika Goyal2016-11-291-1/+1
| | | | | | | | | | | Check for iommu_gather_ops structures that are only stored in the tlb field of an io_pgtable_cfg structure. The tlb field is of type const struct iommu_gather_ops *, so iommu_gather_ops structures having this property can be declared as const. Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/arm-smmu: Constify iommu_gather_ops structuresBhumika Goyal2016-11-291-1/+1
| | | | | | | | | | | Check for iommu_gather_ops structures that are only stored in the tlb field of an io_pgtable_cfg structure. The tlb field is of type const struct iommu_gather_ops *, so iommu_gather_ops structures having this property can be declared as const. Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/io-pgtable-arm: Use for_each_set_bit to simplify the codeKefeng Wang2016-11-292-8/+2
| | | | | | | | | We can use for_each_set_bit() to simplify the code slightly in the ARM io-pgtable self tests. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* Linux 4.9-rc5v4.9-rc5Linus Torvalds2016-11-131-1/+1
|
* Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2016-11-1312-23/+112
|\ | | | | | | | | | | | | | | | | | | | | Pull KVM fixes from Paolo Bonzini: "ARM fixes. There are a couple pending x86 patches but they'll have to wait for next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs KVM: arm/arm64: vgic: Prevent access to invalid SPIs arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU
| * Merge tag 'kvm-arm-for-v4.9-rc4' of ↵Paolo Bonzini2016-11-1112-23/+112
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM updates for v4.9-rc4 - Kick the vcpu when a pending interrupt becomes pending again - Prevent access to invalid interrupt registers - Invalid TLBs when two vcpus from the same VM share a CPU
| | * KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQsShih-Wei Li2016-11-041-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In cases like IPI, we could be queueing an interrupt for a VCPU that is already running and is not about to exit, because the VCPU has entered the VM with the interrupt pending and would not trap on EOI'ing that interrupt. This could result to delays in interrupt deliveries or even loss of interrupts. To guarantee prompt interrupt injection, here we have to try to kick the VCPU. Signed-off-by: Shih-Wei Li <shihwei@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
| | * KVM: arm/arm64: vgic: Prevent access to invalid SPIsAndre Przywara2016-11-042-21/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In our VGIC implementation we limit the number of SPIs to a number that the userland application told us. Accordingly we limit the allocation of memory for virtual IRQs to that number. However in our MMIO dispatcher we didn't check if we ever access an IRQ beyond that limit, leading to out-of-bound accesses. Add a test against the number of allocated SPIs in check_region(). Adjust the VGIC_ADDR_TO_INT macro to avoid an actual division, which is not implemented on ARM(32). [maz: cleaned-up original patch] Cc: stable@vger.kernel.org Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
| | * arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a ↵Marc Zyngier2016-11-049-2/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | single CPU Architecturally, TLBs are private to the (physical) CPU they're associated with. But when multiple vcpus from the same VM are being multiplexed on the same CPU, the TLBs are not private to the vcpus (and are actually shared across the VMID). Let's consider the following scenario: - vcpu-0 maps PA to VA - vcpu-1 maps PA' to VA If run on the same physical CPU, vcpu-1 can hit TLB entries generated by vcpu-0 accesses, and access the wrong physical page. The solution to this is to keep a per-VM map of which vcpu ran last on each given physical CPU, and invalidate local TLBs when switching to a different vcpu from the same VM. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | | Merge branch 'media-fixes' (patches from Mauro)Linus Torvalds2016-11-1314-249/+310
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge media fixes from Mauro Carvalho Chehab: "This contains two patches fixing problems with my patch series meant to make USB drivers to work again after the DMA on stack changes. The last patch on this series is actually not related to DMA on stack. It solves a longstanding bug affecting module unload, causing module_put() to be called twice. It was reported by the user who reported and tested the issues with the gp8psk driver with the DMA fixup patches. As we're late at -rc cycle, maybe you prefer to not apply it right now. If this is the case, I'll add to the pile of patches for 4.10. Exceptionally this time, I'm sending the patches via e-mail, because I'm on another trip, and won't be able to use the usual procedure until Monday. Also, it is only three patches, and you followed already the discussions about the first one" * emailed patches from Mauro Carvalho Chehab <mchehab@osg.samsung.com>: gp8psk: Fix DVB frontend attach gp8psk: fix gp8psk_usb_in_op() logic dvb-usb: move data_mutex to struct dvb_usb_device
| * | | gp8psk: Fix DVB frontend attachMauro Carvalho Chehab2016-11-137-152/+246
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DVB binding schema at the DVB core assumes that the frontend is a separate driver. Faling to do that causes OOPS when the module is removed, as it tries to do a symbol_put_addr on an internal symbol, causing craches like: WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70 Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core] CPU: 1 PID: 28102 Comm: rmmod Tainted: P WC O 4.8.4-build.1 #1 Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009 Call Trace: dump_stack+0x44/0x64 __warn+0xfa/0x120 module_put+0x57/0x70 module_put+0x57/0x70 warn_slowpath_null+0x23/0x30 module_put+0x57/0x70 gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk] symbol_put_addr+0x27/0x50 dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb] From Derek's tests: "Attach bug is fixed, tuning works, module unloads without crashing. Everything seems ok!" Reported-by: Derek <user.vdr@gmail.com> Tested-by: Derek <user.vdr@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | gp8psk: fix gp8psk_usb_in_op() logicMauro Carvalho Chehab2016-11-131-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op(). Fix it. From Derek's email: "Fix confirmed using 2 different Skywalker models with HD mpeg4, SD mpeg2." Suggested-by: Johannes Stezenbach <js@linuxtv.org> Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") Tested-by: Derek <user.vdr@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | dvb-usb: move data_mutex to struct dvb_usb_deviceMauro Carvalho Chehab2016-11-137-95/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The data_mutex is initialized too late, as it is needed for each device driver's power control, causing an OOPS: dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 PGD 0 Oops: 0002 [#1] SMP Modules linked in: dvb_usb_cinergyT2(+) dvb_usb CPU: 0 PID: 2029 Comm: modprobe Not tainted 4.9.0-rc4-dvbmod #24 Hardware name: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014 task: ffff88020e943840 task.stack: ffff8801f36ec000 RIP: 0010:[<ffffffff846617af>] [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 RSP: 0018:ffff8801f36efb10 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88021509bdc8 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88021509bdcc RBP: ffff8801f36efb58 R08: ffff88021f216320 R09: 0000000000100000 R10: ffff88021f216320 R11: 00000023fee6c5a1 R12: ffff88020e943840 R13: ffff88021509bdcc R14: 00000000ffffffff R15: ffff88021509bdd0 FS: 00007f21adb86740(0000) GS:ffff88021f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000215bce000 CR4: 00000000001406f0 Call Trace: mutex_lock+0x16/0x25 cinergyt2_power_ctrl+0x1f/0x60 [dvb_usb_cinergyT2] dvb_usb_device_init+0x21e/0x5d0 [dvb_usb] cinergyt2_usb_probe+0x21/0x50 [dvb_usb_cinergyT2] usb_probe_interface+0xf3/0x2a0 driver_probe_device+0x208/0x2b0 __driver_attach+0x87/0x90 driver_probe_device+0x2b0/0x2b0 bus_for_each_dev+0x52/0x80 bus_add_driver+0x1a3/0x220 driver_register+0x56/0xd0 usb_register_driver+0x77/0x130 do_one_initcall+0x46/0x180 free_vmap_area_noflush+0x38/0x70 kmem_cache_alloc+0x84/0xc0 do_init_module+0x50/0x1be load_module+0x1d8b/0x2100 find_symbol_in_section+0xa0/0xa0 SyS_finit_module+0x89/0x90 entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 a7 1d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 4c 89 3c 24 41 be ff ff ff ff 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 1a 49 c7 44 24 08 02 00 00 00 c6 43 RIP [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 RSP <ffff8801f36efb10> CR2: 0000000000000000 So, move it to the struct dvb_usb_device and initialize it before calling the driver's callbacks. Reported-by: Jörg Otte <jrg.otte@gmail.com> Tested-by: Jörg Otte <jrg.otte@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge tag 'char-misc-4.9-rc5' of ↵Linus Torvalds2016-11-134-6/+3
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are three small driver fixes for some reported issues for 4.9-rc5. One for the hyper-v subsystem, fixing up a naming issue that showed up in 4.9-rc1, one mei driver fix, and one fix for parallel ports, resolving a reported regression. All have been in linux-next with no reported issues" * tag 'char-misc-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ppdev: fix double-free of pp->pdev->name vmbus: make sysfs names consistent with PCI mei: bus: fix received data size check in NFC fixup
| * | | | ppdev: fix double-free of pp->pdev->nameJann Horn2016-11-101-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | free_pardevice() is called by parport_unregister_device() and already frees pp->pdev->name, don't try to do it again. This bug causes kernel crashes. I found and verified this with KASAN and some added pr_emerg()s: [ 60.316568] pp_release: pp->pdev->name == ffff88039cb264c0 [ 60.316692] free_pardevice: freeing par_dev->name at ffff88039cb264c0 [ 60.316706] pp_release: kfree(ffff88039cb264c0) [ 60.316714] ========================================================== [ 60.316722] BUG: Double free or freeing an invalid pointer [ 60.316731] Unexpected shadow byte: 0xFB [ 60.316801] Object at ffff88039cb264c0, in cache kmalloc-32 size: 32 [ 60.316813] Allocated: [ 60.316824] PID = 1695 [ 60.316869] Freed: [ 60.316880] PID = 1695 [ 60.316935] ========================================================== Signed-off-by: Jann Horn <jann@thejh.net> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | vmbus: make sysfs names consistent with PCIStephen Hemminger2016-11-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 9a56e5d6a0ba ("Drivers: hv: make VMBus bus ids persistent") the name of vmbus devices in sysfs changed to be (in 4.9-rc1): /sys/bus/vmbus/vmbus-6aebe374-9ba0-11e6-933c-00259086b36b The prefix ("vmbus-") is redundant and differs from how PCI is represented in sysfs. Therefore simplify to: /sys/bus/vmbus/6aebe374-9ba0-11e6-933c-00259086b36b Please merge this before 4.9 is released and the old format has to live forever. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | mei: bus: fix received data size check in NFC fixupAlexander Usyskin2016-10-312-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NFC version reply size checked against only header size, not against full message size. That may lead potentially to uninitialized memory access in version data. That leads to warnings when version data is accessed: drivers/misc/mei/bus-fixup.c: warning: '*((void *)&ver+11)' may be used uninitialized in this function [-Wuninitialized]: => 212:2 Reported in Build regressions/improvements in v4.9-rc3 https://lkml.org/lkml/2016/10/30/57 Fixes: 59fcd7c63abf (mei: nfc: Initial nfc implementation) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | Merge tag 'driver-core-4.9-rc5' of ↵Linus Torvalds2016-11-131-2/+3
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two driver core fixes for 4.9-rc5. The first resolves an issue with some drivers not liking to be unbound and bound again (if CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled), which solves some reported problems with graphics and storage drivers. The other resolves a smatch error with the 4.9-rc1 driver core changes around this feature. Both have been in linux-next with no reported issues" * tag 'driver-core-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: fix smatch warning on dev->bus check driver core: skip removal test for non-removable drivers
| * | | | | driver core: fix smatch warning on dev->bus checkRob Herring2016-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d42a09802174 (driver core: skip removal test for non-removable drivers) introduced a smatch warning: drivers/base/dd.c:386 really_probe() warn: variable dereferenced before check 'dev->bus' (see line 373) Fix the warning by removing the dev->bus NULL check. dev->bus will never be NULL, so the check was unnecessary. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | driver core: skip removal test for non-removable driversRob Herring2016-10-311-1/+2
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some drivers do not support removal/unbinding. These drivers should have drv->suppress_bind_attrs set to true, so use that to skip the removal test. This doesn't fix anything reported so far, but should prevent some other cases. Some drivers will need fixes to set suppress_bind_attrs to avoid this test. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=177021 Fixes: bea5b158ff0d ("driver core: add test of driver remove calls during probe") Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | Merge tag 'staging-4.9-rc5' of ↵Linus Torvalds2016-11-1310-53/+63
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO fixes from Grek KH: "Here are a few small staging and iio driver fixes for reported issues. The last one was cherry-picked from my -next branch to resolve a build warning that Arnd fixed, in his quest to be able to turn -Wmaybe-uninitialized back on again. That patch, and all of the others, have been in linux-next for a while with no reported issues" * tag 'staging-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: maxim_thermocouple: detect invalid storage size in read() staging: nvec: remove managed resource from PS2 driver Revert "staging: nvec: ps2: change serio type to passthrough" drivers: staging: nvec: remove bogus reset command for PS/2 interface staging: greybus: arche-platform: fix device reference leak staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value staging: sm750fb: Fix bugs introduced by early commits iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation. iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver) iio: st_sensors: fix scale configuration for h3lis331dl staging: iio: ad5933: avoid uninitialized variable in error case
| * | | | | iio: maxim_thermocouple: detect invalid storage size in read()Arnd Bergmann2016-11-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other than 2 or 4 will result in undefined behavior: drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read': drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This probably cannot happen, but returning -EINVAL here is appropriate and makes gcc happy and the code more robust. Fixes: 231147ee77f3 ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> (cherry picked from commit 32cb7d27e65df9daa7cee8f1fdf7b259f214bee2) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | staging: nvec: remove managed resource from PS2 driverMarc Dietrich2016-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of the managed version of kzalloc). Serio struct should never by managed because it is refcounted. Doing so will lead to a double free oops on module remove. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Fixes: e534f3e9429f ("staging:nvec: Introduce the use of the managed version of kzalloc") Cc: stable <stable@vger.kernel.org> # 3.15+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | Revert "staging: nvec: ps2: change serio type to passthrough"Paul Fertser2016-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 36b30d6138f4677514aca35ab76c20c1604baaad. This is necessary to detect paz00 (ac100) touchpad properly as one speaking ETPS/2 protocol. Without it X.org's synaptics driver doesn't work as the touchpad is detected as an ImPS/2 mouse instead. Commit ec6184b1c717b8768122e25fe6d312f609cc1bb4 changed the way auto-detection is performed on ports marked as pass through and made the issue apparent. A pass through port is an additional PS/2 port used to connect a slave device to a master device that is using PS/2 to communicate with the host (so slave's PS/2 communication is tunneled over master's PS/2 link). "Synaptics PS/2 TouchPad Interfacing Guide" describes such a setup (PS/2 PASS-THROUGH OPTION section). Since paz00's embedded controller is not connected to a PS/2 port itself, the PS/2 interface it exposes is not a pass-through one. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Acked-by: Marc Dietrich <marvin24@gmx.de> Fixes: 36b30d6138f4 ("staging: nvec: ps2: change serio type to passthrough") Cc: stable <stable@vger.kernel.org> # 3.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | drivers: staging: nvec: remove bogus reset command for PS/2 interfacePaul Fertser2016-11-071-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This command was sent behind serio's back and the answer to it was confusing atkbd probe function which lead to the elantech touchpad getting detected as a keyboard. To prevent this from happening just let every party do its part of the job. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Acked-by: Marc Dietrich <marvin24@gmx.de> Cc: stable <stable@vger.kernel.org> # 3.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | staging: greybus: arche-platform: fix device reference leakJohan Hovold2016-11-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure to drop the device reference taken by of_find_device_by_node() before returning from arche_platform_change_state(). Note that this code is expected to be removed, but let's fix up the leak nonetheless. Fixes: 886aba558b9e ("greybus: arche-platform: Export fn to allow...") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Vaibhav Hiremath <hvaibhav.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return valueIan Abbott2016-11-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `ni_tio_clock_period_ps()` used to return the clock period in picoseconds, and had a `BUG()` call for invalid cases. It was changed to pass the clock period back via a pointer parameter and return an error for the invalid cases. Unfortunately the code to handle user-specified clock sources with user-specified clock period is still returning the clock period the old way, which can lead to the caller not getting the clock period, or seeing an unexpected error. Fix it by passing the clock period via the pointer parameter and returning `0`. Fixes: b42ca86ad605 ("staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_clock_src()") Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: <stable@vger.kernel.org> # 4.7+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | staging: sm750fb: Fix bugs introduced by early commitsHuacai Chen2016-11-071-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Early commit 30ca5cb63c56965 ("staging: sm750fb: change definition of PANEL_PLANE_TL fields") and 27b047bbe1ee9c0 ("staging: sm750fb: change definition of PANEL_PLANE_BR fields") modify the register bit fields definitions. But the modifications are wrong, because the bit mask of "bit field 10:0" is not 0xeff, but 0x7ff. The wrong definition bugs makes display very strange. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: stable <stable@vger.kernel.org> # 4.6+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | Merge tag 'iio-fixes-for-4.9b' of ↵Greg Kroah-Hartman2016-11-075-42/+52
| |\ \ \ \ \ | | |/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Second set of IIO fixes for the 4.9 cycle. Interestingly scale related fixes for accelerometers at both ends of the range. Obviously more varied devices turning up than we've seen before! * ad5933 - fix an uninitialized value in a return case that is winding up GCC. * hid sensors - missing pm function prevents hid rotations sensors from working on newer ISH hubs (works by luck on older ones) - increase of scale precision needed to fix a case where on a yoga 260 the reported scale is 0 (presumably a high precision but very low g sensor). * st_sensors - fix an issue seen with the hs3lis331dl where the range is much greater than previous devices (100's of g) and hence the per bit scale is greater than 1.
| | * | | | iio: hid-sensors: Increase the precision of scale to fix wrong reading ↵Song Hongyan2016-11-051-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | interpretation. While testing, it was observed that on some platforms the scale value from iio sysfs for gyroscope is always 0 (E.g. Yoga 260). This results in the final angular velocity component values to be zeros. This is caused by insufficient precision of scale value displayed in sysfs. If the precision is changed to nano from current micro, then this is sufficient to display the scale value on this platform. Since this can be a problem for all other HID sensors, increase scale precision of all HID sensors to nano from current micro. Results on Yoga 260: name scale before scale now -------------------------------------------- gyro_3d 0.000000 0.000000174 als 0.001000 0.001000000 magn_3d 0.000001 0.000001000 accel_3d 0.000009 0.000009806 Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * | | | iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)Song Hongyan2016-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fix makes newer ISH hubs work. Previous ones worked by lucky coincidence. Rotation sensor function does not work due to miss PM function. Add common hid sensor iio pm function for rotation sensor. Further clarification from Srinivas: If CONFIG_PM is not defined, then this prevents this sensor to function. So above commit caused this. This sensor was supposed to be always on to trigger wake up in prior external hubs. But with the new ISH hub this is not the case. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Fixes: 2b89635e9a9e ("iio: hid_sensor_hub: Common PM functions") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * | | | iio: st_sensors: fix scale configuration for h3lis331dlLorenzo Bianconi2016-10-302-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix scale configuration/parsing for h3lis331dl accel driver when sensitivity is higher than 1(m/s^2)/digit Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Fixes: 1e52fefc9b0c ("iio: accel: Add support for the h3lis331dl accelerometer") Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
| | * | | | staging: iio: ad5933: avoid uninitialized variable in error caseArnd Bergmann2016-10-251-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ad5933_i2c_read function returns an error code to indicate whether it could read data or not. However ad5933_work() ignores this return code and just accesses the data unconditionally, which gets detected by gcc as a possible bug: drivers/staging/iio/impedance-analyzer/ad5933.c: In function 'ad5933_work': drivers/staging/iio/impedance-analyzer/ad5933.c:649:16: warning: 'status' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds minimal error handling so we only evaluate the data if it was correctly read. Link: https://patchwork.kernel.org/patch/8110281/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
* | | | | | Merge tag 'usb-4.9-rc5' of ↵Linus Torvalds2016-11-1313-37/+42
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 4.9-rc5 Nothing major, just small fixes for reported issues, all of these have been in linux-next for a while with no reported issues" * tag 'usb-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: cdc-acm: fix TIOCMIWAIT cdc-acm: fix uninitialized variable drivers/usb: Skip auto handoff for TI and RENESAS usb controllers usb: musb: remove duplicated actions usb: musb: da8xx: Don't print phy error on -EPROBE_DEFER phy: sun4i: check PMU presence when poking unknown bit of pmu phy-rockchip-pcie: remove deassert of phy_rst from exit callback phy: da8xx-usb: rename the ohci device to ohci-da8xx phy: Add reset callback for not generic phy uwb: fix device reference leaks usb: gadget: u_ether: remove interrupt throttling usb: dwc3: st: add missing <linux/pinctrl/consumer.h> include usb: dwc3: Fix error handling for core init
| * | | | | | USB: cdc-acm: fix TIOCMIWAITJohan Hovold2016-11-101-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TIOCMIWAIT implementation would return -EINVAL if any of the three supported signals were included in the mask. Instead of returning an error in case TIOCM_CTS is included, simply drop the mask check completely, which is in accordance with how other drivers implement this ioctl. Fixes: 5a6a62bdb925 ("cdc-acm: add TIOCMIWAIT") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | cdc-acm: fix uninitialized variableOliver Neukum2016-11-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | variable struct usb_cdc_parsed_header h may be used uninitialized in acm_probe. In kernel 4.8. /* handle quirks deadly to normal probing*/ if (quirks == NO_UNION_NORMAL) ... goto skip_normal_probe; } we bypass call to cdc_parse_cdc_header(&h, intf, buffer, buflen); but later use h in if (h.usb_cdc_country_functional_desc) { /* export the country data */ Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Reported-by: Victor Sologoubov <victor0@rambler.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | drivers/usb: Skip auto handoff for TI and RENESAS usb controllersBabu Moger2016-11-071-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Never seen XHCI auto handoff working on TI and RENESAS cards. Eventually, we force handoff. This code forces the handoff unconditionally. It saves 5 seconds boot time for each card. Signed-off-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 00:47:59 +0100