summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* net: Update TCP congestion control documentationAnmol Sarma2017-06-052-19/+14
| | | | | | | | Update tcp.txt to fix mandatory congestion control ops and default CCA selection. Also, fix comment in tcp.h for undo_cwnd. Signed-off-by: Anmol Sarma <me@anmolsarma.in> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: Fix the check in attaching steering rulesTalat Batheesh2017-06-054-9/+25
| | | | | | | | | | | | | | | | | Our previous patch (cited below) introduced a regression for RAW Eth QPs. Fix it by checking if the QP number provided by user-space exists, hence allowing steering rules to be added for valid QPs only. Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring") Reported-by: Or Gerlitz <gerlitz.or@gmail.com> Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sit: reload iphdr in ipip6_rcvHaishuang Yan2017-06-051-0/+1
| | | | | | | | | Since iptunnel_pull_header() can call pskb_may_pull(), we must reload any pointer that was related to skb->head. Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ping: do not abuse udp_poll()Eric Dumazet2017-06-054-3/+4
| | | | | | | | | | | | | | | | | | Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Sasha Levin <alexander.levin@verizon.com> Cc: Solar Designer <solar@openwall.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Lorenzo Colitti <lorenzo@google.com> Acked-By: Lorenzo Colitti <lorenzo@google.com> Tested-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: Fix stale cpu_switch reference after unbind then bindFlorian Fainelli2017-06-051-1/+3
| | | | | | | | | | | | | | | | | | | | | | Commit 9520ed8fb841 ("net: dsa: use cpu_switch instead of ds[0]") replaced the use of dst->ds[0] with dst->cpu_switch since that is functionally equivalent, however, we can now run into an use after free scenario after unbinding then rebinding the switch driver. The use after free happens because we do correctly initialize dst->cpu_switch the first time we probe in dsa_cpu_parse(), then we unbind the driver: dsa_dst_unapply() is called, and we rebind again. dst->cpu_switch now points to a freed "ds" structure, and so when we finally dereference it in dsa_cpu_port_ethtool_setup(), we oops. To fix this, simply set dst->cpu_switch to NULL in dsa_dst_unapply() which guarantees that we always correctly re-assign dst->cpu_switch in dsa_cpu_parse(). Fixes: 9520ed8fb841 ("net: dsa: use cpu_switch instead of ds[0]") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: Fix leak in ipv6_gso_segment().David S. Miller2017-06-051-1/+3
| | | | | | | | | If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to. Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options") Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* geneve: fix needed_headroom and max_mtu for collect_metadataEric Garver2017-06-051-1/+1
| | | | | | | | | | | | | | | | Since commit 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") when using COLLECT_METADATA geneve devices are created with too small of a needed_headroom and too large of a max_mtu. This is because ip_tunnel_info_af() is not valid with the device level info when using COLLECT_METADATA and we mistakenly fall into the IPv4 case. For COLLECT_METADATA, always use the worst case of ipv6 since both sockets are created. Fixes: 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* sock: reset sk_err when the error queue is emptySoheil Hassas Yeganeh2017-06-051-1/+4
| | | | | | | | | | | | | | | | | | | | Prior to f5f99309fa74 (sock: do not set sk_err in sock_dequeue_err_skb), sk_err was reset to the error of the skb on the head of the error queue. Applications, most notably ping, are relying on this behavior to reset sk_err for ICMP packets. Set sk_err to the ICMP error when there is an ICMP packet at the head of the error queue. Fixes: f5f99309fa74 (sock: do not set sk_err in sock_dequeue_err_skb) Reported-by: Cyril Hrubis <chrubis@suse.cz> Tested-by: Cyril Hrubis <chrubis@suse.cz> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe: use PAGE_ALLOC_COSTLY_ORDER in xgbe_map_rx_bufferMichal Hocko2017-06-051-3/+2
| | | | | | | | | | | | | | | xgbe_map_rx_buffer is rather confused about what PAGE_ALLOC_COSTLY_ORDER means. It uses PAGE_ALLOC_COSTLY_ORDER-1 assuming that PAGE_ALLOC_COSTLY_ORDER is the first costly order which is not the case actually because orders larger than that are costly. And even that applies only to sleeping allocations which is not the case here. We simply do not perform any costly operations like reclaim or compaction for those. Simplify the code by dropping the order calculation and use PAGE_ALLOC_COSTLY_ORDER directly. Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ip6_tunnel: fix traffic class routing for tunnelsLiam McBirnie2017-06-051-0/+3
| | | | | | | | | | | | | | | | | ip6_route_output() requires that the flowlabel contains the traffic class for policy routing. Commit 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") removed the code which previously added the traffic class to the flowlabel. The traffic class is added here because only route lookup needs the flowlabel to contain the traffic class. Fixes: 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") Signed-off-by: Liam McBirnie <liam.mcbirnie@boeing.com> Acked-by: Peter Dawson <peter.a.dawson@boeing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qcom/emac: do not use hardware mdio automatic pollingTimur Tabi2017-06-053-93/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use software polling (PHY_POLL) to check for link state changes instead of relying on the EMAC's hardware polling feature. Some PHY drivers are unable to get a functioning link because the HW polling is not robust enough. The EMAC is able to poll the PHY on the MDIO bus looking for link state changes (via the Link Status bit in the Status Register at address 0x1). When the link state changes, the EMAC triggers an interrupt and tells the driver what the new state is. The feature eliminates the need for software to poll the MDIO bus. Unfortunately, this feature is incompatible with phylib, because it ignores everything that the PHY core and PHY drivers are trying to do. In particular: 1. It assumes a compatible register set, so PHYs with different registers may not work. 2. It doesn't allow for hardware errata that have work-arounds implemented in the PHY driver. 3. It doesn't support multiple register pages. If the PHY core switches the register set to another page, the EMAC won't know the page has changed and will still attempt to read the same PHY register. 4. It only checks the copper side of the link, not the SGMII side. Some PHY drivers (e.g. at803x) may also check the SGMII side, and report the link as not ready during autonegotiation if the SGMII link is still down. Phylib then waits for another interrupt to query the PHY again, but the EMAC won't send another interrupt because it thinks the link is up. Cc: stable@vger.kernel.org # 4.11.x Tested-by: Manoj Iyer <manoj.iyer@canonical.com> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* virtio_net: lower limit on buffer sizeMichael S. Tsirkin2017-06-021-2/+3
| | | | | | | | | | | | | | | | commit d85b758f72b0 ("virtio_net: fix support for small rings") was supposed to increase the buffer size for small rings but had an unintentional side effect of decreasing it for large rings. This seems to break some setups - it's not yet clear why, but increasing buffer size back to what it was before helps. Fixes: d85b758f72b0 ("virtio_net: fix support for small rings") Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: "J. Bruce Fields" <bfields@fieldses.org> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: Fix tunnel offload for 82xx adaptersChopra, Manish2017-06-024-2/+30
| | | | | | | | | | | | Qlogic's 82xx series adapter doesn't support tunnel offloads, driver incorrectly assumes that it is supported and causes firmware hang while running tunnel IO. This patch fixes this by not advertising tunnel offloads for 82xx adapters. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vxlan: fix use-after-free on deletionMark Bloch2017-06-021-6/+13
| | | | | | | | | | | | | | | | | Adding a vxlan interface to a socket isn't symmetrical, while adding is done in vxlan_open() the deletion is done in vxlan_dellink(). This can cause a use-after-free error when we close the vxlan interface before deleting it. We add vxlan_vs_del_dev() to match vxlan_vs_add_dev() and call it from vxlan_stop() to match the call from vxlan_open(). Fixes: 56ef9c909b40 ("vxlan: Move socket initialization to within rtnl scope") Acked-by: Jiri Benc <jbenc@redhat.com> Tested-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Mark Bloch <markb@mellanox.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ibmvnic: Remove module author mailing addressThomas Falcon2017-06-021-1/+1
| | | | | | | | | The original author left the project and so far has not responded to emails sent to the listed address. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: stmmac: Fix altr_tse_pcs SGMII InitializationThor Thayer2017-06-021-1/+5
| | | | | | | | | Fix NETDEV WATCHDOG timeout on startup by adding missing register writes that properly setup SGMII. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tcp: disallow cwnd undo when switching congestion controlYuchung Cheng2017-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | When the sender switches its congestion control during loss recovery, if the recovery is spurious then it may incorrectly revert cwnd and ssthresh to the older values set by a previous congestion control. Consider a congestion control (like BBR) that does not use ssthresh and keeps it infinite: the connection may incorrectly revert cwnd to an infinite value when switching from BBR to another congestion control. This patch fixes it by disallowing such cwnd undo operation upon switching congestion control. Note that undo_marker is not reset s.t. the packets that were incorrectly marked lost would be corrected. We only avoid undoing the cwnd in tcp_undo_cwnd_reduction(). Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: avoid enabling napi twice to the same queueGanesh Goudar2017-06-021-0/+4
| | | | | | | | | Take uld mutex to avoid race between cxgb_up() and cxgb4_register_uld() to enable napi for the same uld queue. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: xfrm: Handle errors reported by xfrm6_find_1stfragopt()Ben Hutchings2017-06-022-0/+4
| | | | | | | | | | xfrm6_find_1stfragopt() may now return an error code and we must not treat it as a length. Fixes: 2423496af35d ("ipv6: Prevent overrun when parsing v6 header options") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'mac80211-for-davem-2017-06-02' of ↵David S. Miller2017-06-026-101/+72
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just two fixes: * fix the per-CPU drop counters to not be added to the rx_packets counter, but really the drop counter * fix TX aggregation start/stop callback races by setting bits instead of allocating and queueing an skb ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac80211: fix dropped counter in multiqueue RXJohannes Berg2017-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In the commit enabling per-CPU station statistics, I inadvertedly copy-pasted some code to update rx_packets and forgot to change it to update rx_dropped_misc. Fix that. This addresses https://bugzilla.kernel.org/show_bug.cgi?id=195953. Fixes: c9c5962b56c1 ("mac80211: enable collecting station statistics per-CPU") Reported-by: Petru-Florin Mihancea <petrum@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * mac80211: fix TX aggregation start/stop callback raceJohannes Berg2017-05-305-100/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When starting or stopping an aggregation session, one of the steps is that the driver calls back to mac80211 that the start/stop can proceed. This is handled by queueing up a fake SKB and processing it from the normal iface/sdata work. Since this isn't flushed when disassociating, the following race is possible: * associate * start aggregation session * driver callback * disassociate * associate again to the same AP * callback processing runs, leading to a WARN_ON() that the TID hadn't requested aggregation If the second association isn't to the same AP, there would only be a message printed ("Could not find station: <addr>"), but the same race could happen. Fix this by not going the whole detour with a fake SKB etc. but simply looking up the aggregation session in the driver callback, marking it with a START_CB/STOP_CB bit and then scheduling the regular aggregation work that will now process these bits as well. This also simplifies the code and gets rid of the whole problem with allocation failures of said skb, which could have left the session in limbo. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* | net: dsa: Move dsa_switch_{suspend,resume} out of legacy.cFlorian Fainelli2017-06-022-47/+47
| | | | | | | | | | | | | | | | | | | | dsa_switch_suspend() and dsa_switch_resume() are functions that belong in net/dsa/dsa.c and are not part of the legacy platform support code. Fixes: a6a71f19fe5e ("net: dsa: isolate legacy code") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: systemport: Fix missing Wake-on-LAN interrupt for SYSTEMPORT LiteFlorian Fainelli2017-06-021-2/+5
| | | | | | | | | | | | | | | | | | | | | | On SYSTEMPORT Lite, since we have the main interrupt source in the first cell, the second cell is the Wake-on-LAN interrupt, yet the code was not properly updated to fetch the second cell, and instead looked at the third and non-existing cell for Wake-on-LAN. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'ARM-imx6ul-14x14-evk-Fix-suspend-over-nfs-by-phy'David S. Miller2017-06-012-14/+34
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Leonard Crestez says: ==================== ARM: imx6ul-14x14-evk: Fix suspend over nfs by phy Right now attempting doing suspend/resume while root is mounted over NFS hangs on imx6ul-14x14-evk. This is happening because ksz8081 phy fixups are lost on resume. Fix this by using equivalent devicetree properties instead of a phy fixup and handling those properties on resume in the micrel driver. In theory it might now be possible to remove the phy fixup from mach-imx6ul entirely but it is possible that this would break other imx6ul boards which use the same phy. The solution would be to patch their dts but it's not clear how to identify affected boards. This code is shared with imx6ull-14x14-evk but 6ull suspend needs an unrelated patch: https://lkml.org/lkml/2017/5/30/584 This is something of a corner case so there is no CC: stable. Changes since v1: https://lkml.org/lkml/2017/5/30/672 * Split a kszphy_config_reset function for stuff shared between config_init and resume. Calling config_init directly could be an option but on some HW variants it does extra stuff like parsing devicetree options. That would not be appropriate for resume code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: phy: micrel: Restore led_mode and clk_sel on resumeLeonard Crestez2017-06-011-14/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These bits seem to be lost after a suspend/resume cycle so just set them again. Do this by splitting the handling of these bits into a function that is also called on resume. This patch fixes ethernet suspend/resume on imx6ul-14x14-evk boards. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ARM: dts: imx6ul-14x14-evk: Add ksz8081 phy propertiesLeonard Crestez2017-06-011-0/+6
|/ / | | | | | | | | | | | | | | | | | | | | | | | | Right now mach-imx6ul registers a fixup for the ksz8081 phy. The same register values can be set through the micrel phy driver by using dts properties. This seems preferable and allows cleanly fixing suspend/resume. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mISDN: Fix a sleep-in-atomic bugJia-Ju Bai2017-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | The driver may sleep under a read spin lock, and the function call path is: send_socklist (acquire the lock by read_lock) skb_copy(GFP_KERNEL) --> may sleep To fix it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | vxlan: eliminate cached dst leakLance Richardson2017-06-011-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 0c1d70af924b ("net: use dst_cache for vxlan device"), cached dst entries could be leaked when more than one remote was present for a given vxlan_fdb entry, causing subsequent netns operations to block indefinitely and "unregister_netdevice: waiting for lo to become free." messages to appear in the kernel log. Fix by properly releasing cached dst and freeing resources in this case. Fixes: 0c1d70af924b ("net: use dst_cache for vxlan device") Signed-off-by: Lance Richardson <lrichard@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bridge: start hello timer only if device is upNikolay Aleksandrov2017-06-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the transition of NO_STP -> KERNEL_STP was fixed by always calling mod_timer in br_stp_start, it introduced a new regression which causes the timer to be armed even when the bridge is down, and since we stop the timers in its ndo_stop() function, they never get disabled if the device is destroyed before it's upped. To reproduce: $ while :; do ip l add br0 type bridge hello_time 100; brctl stp br0 on; ip l del br0; done; CC: Xin Long <lucien.xin@gmail.com> CC: Ivan Vecera <cera@cera.cz> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Fixes: 6d18c732b95c ("bridge: start hello_timer when enabling KERNEL_STP in br_stp_start") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: Fix Multi-CosMintz, Yuval2017-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apparently multi-cos isn't working for bnx2x quite some time - driver implements ndo_select_queue() to allow queue-selection for FCoE, but the regular L2 flow would cause it to modulo the fallback's result by the number of queues. The fallback would return a queue matching the needed tc [via __skb_tx_hash()], but since the modulo is by the number of TSS queues where number of TCs is not accounted, transmission would always be done by a queue configured into using TC0. Fixes: ada7c19e6d27 ("bnx2x: use XPS if possible for bnx2x_select_queue instead of pure hash") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: update latest firmware version supportedGanesh Goudar2017-06-011-3/+3
| | | | | | | | | | | | | | | | Change t4fw_version.h to update latest firmware version number to 1.16.45.0. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netlink: don't send unknown nsidNicolas Dichtel2017-06-011-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The NETLINK_F_LISTEN_ALL_NSID otion enables to listen all netns that have a nsid assigned into the netns where the netlink socket is opened. The nsid is sent as metadata to userland, but the existence of this nsid is checked only for netns that are different from the socket netns. Thus, if no nsid is assigned to the socket netns, NETNSA_NSID_NOT_ASSIGNED is reported to the userland. This value is confusing and useless. After this patch, only valid nsid are sent to userland. Reported-by: Flavio Leitner <fbl@sysclose.org> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qlcnic: Fix a sleep-in-atomic bug in qlcnic_82xx_hw_write_wx_2M and ↵Jia-Ju Bai2017-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | qlcnic_82xx_hw_read_wx_2M The driver may sleep under a write spin lock, and the function call path is: qlcnic_82xx_hw_write_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range qlcnic_82xx_hw_read_wx_2M (acquire the lock by write_lock_irqsave) crb_win_lock qlcnic_pcie_sem_lock usleep_range To fix it, the usleep_range is replaced with udelay. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mpls: fix clearing of dead nh_flags on link upRoopa Prabhu2017-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | recent fixes to use WRITE_ONCE for nh_flags on link up, accidently ended up leaving the deadflags on a nh. This patch fixes the WRITE_ONCE to use freshly evaluated nh_flags. Fixes: 39eb8cd17588 ("net: mpls: rt_nhn_alive and nh_flags should be accessed using READ_ONCE") Reported-by: Satish Ashok <sashok@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | isdn: Fix a sleep-in-atomic bugJia-Ju Bai2017-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver may sleep under a spin lock, the function call path is: isdn_ppp_mp_receive (acquire the lock) isdn_ppp_mp_reassembly isdn_ppp_push_higher isdn_ppp_decompress isdn_ppp_ccp_reset_trans isdn_ppp_ccp_reset_alloc_state kzalloc(GFP_KERNEL) --> may sleep To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: freescale: fix potential null pointer dereferenceGustavo A. R. Silva2017-05-311-1/+8
| | | | | | | | | | | | | | | | | | Add NULL check before dereferencing pointer _id_ in order to avoid a potential NULL pointer dereference. Addresses-Coverity-ID: 1397995 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: fix auto-loading of Marvell DSA driverRussell King2017-05-311-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Auto-loading of the Marvell DSA driver has stopped working with recent kernels. This seems to be due to the change of binding for DSA devices, moving them from the platform bus to the MDIO bus. In order for module auto-loading to work, we need to provide a MODALIAS string in the uevent file for the device. However, the device core does not automatically provide this, and needs each bus_type to implement a uevent method to generate these strings. The MDIO bus does not provide such a method, so no MODALIAS string is provided: .# cat /sys/bus/mdio_bus/devices/f1072004.mdio-mii\:04/uevent DRIVER=mv88e6085 OF_NAME=switch OF_FULLNAME=/soc/internal-regs/mdio@72004/switch@4 OF_COMPATIBLE_0=marvell,mv88e6085 OF_COMPATIBLE_N=1 In the case of OF-based devices, the solution is easy - of_device_uevent_modalias() does the work for us. After this is done, the uevent file looks like this: .# cat /sys/bus/mdio_bus/devices/f1072004.mdio-mii\:04/uevent DRIVER=mv88e6085 OF_NAME=switch OF_FULLNAME=/soc/internal-regs/mdio@72004/switch@4 OF_COMPATIBLE_0=marvell,mv88e6085 OF_COMPATIBLE_N=1 MODALIAS=of:NswitchT<NULL>Cmarvell,mv88e6085 which results in auto-loading of the Marvell DSA driver on Clearfog platforms. Fixes: c0405563a613 ("ARM: dts: armada-388-clearfog: Utilize new DSA binding") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: fix marvell phy status readingRussell King2017-05-311-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Marvell driver incorrectly provides phydev->lp_advertising as the logical and of the link partner's advert and our advert. This is incorrect - this field is supposed to store the link parter's unmodified advertisment. This allows ethtool to report the correct link partner auto-negotiation status. Fixes: be937f1f89ca ("Marvell PHY m88e1111 driver fix") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | tcp: reinitialize MTU probing when setting MSS in a TCP repairDouglas Caetano dos Santos2017-05-311-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | MTU probing initialization occurred only at connect() and at SYN or SYN-ACK reception, but the former sets MSS to either the default or the user set value (through TCP_MAXSEG sockopt) and the latter never happens with repaired sockets. The result was that, with MTU probing enabled and unless TCP_MAXSEG sockopt was used before connect(), probing would be stuck at tcp_base_mss value until tcp_probe_interval seconds have passed. Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'mlx4-mlx5-MAINTAINERS-update'David S. Miller2017-05-301-3/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tariq Toukan says: ==================== MAINTAINERS updates This patchset contains updates to the MAINTAINERS file. In the first patch, I replace Yishai as the maintainer of the mlx4_core driver. In the other two patches we move an RDMA header file from the list of the mlx4/mlx5 core driver into the respective IB driver, where it belongs. Series generated against net commit: 468b0df61a51 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | MAINTAINERS: Move mlx5 rdma header file to IB driver chargeTariq Toukan2017-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | It belongs there, should not be under mlx5 Core driver. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | MAINTAINERS: Move mlx4 rdma header file to IB driver chargeTariq Toukan2017-05-301-1/+1
| | | | | | | | | | | | | | | | | | | | | It belongs there, should not be under mlx4 Core driver. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | MAINTAINERS: Update MELLANOX MLX4 core VPI driver maintainerTariq Toukan2017-05-301-1/+1
|/ / | | | | | | | | | | | | | | Add myself as a maintainer for mlx4 core driver, replacing Yishai Hadas. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5: avoid build warning for uniprocessorArnd Bergmann2017-05-301-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building the driver with CONFIG_SMP disabled results in a harmless warning: ethernet/mellanox/mlx5/core/main.c: In function 'mlx5_irq_set_affinity_hint': ethernet/mellanox/mlx5/core/main.c:615:6: error: unused variable 'irq' [-Werror=unused-variable] It's better to express the conditional compilation using IS_ENABLED() here, as that lets the compiler see what the intented use for the variable is, and that it can be silently discarded. Fixes: b665d98edc9a ("net/mlx5: Tolerate irq_set_affinity_hint() failures") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: dsa: mv88e6xxx: Add missing static to stub functionsArnd Bergmann2017-05-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | 'static' was not enough, the helpers must be 'static inline' net/dsa/mv88e6xxx/global2.h:123:12: error: 'mv88e6xxx_g2_misc_4_bit_port' defined but not used [-Werror=unused-function] net/dsa/mv88e6xxx/global2.h:117:12: error: 'mv88e6xxx_g2_pvt_write' defined but not used [-Werror=unused-function] Fixes: c21fbe29f858 ("net: dsa: mv88e6xxx: Add missing static to stub functions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | qed: Don't log missing periodic stats by defaultMintz, Yuval2017-05-301-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current implementation lacks the logic for providing management firmware with RDMA-related statistics; [much] worse than that - it logs such events by default to system logs. Since the statistics' gathering is done periodically, using sufficiently new management firmware the system logs would get filled with these unnecessary prints. For now, reduce the verbosity of the log so that it would not be logged by default. Fixes: 6c75424612a7 ("qed: Add support for NCSI statistics") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Documentation: networking: add DPAA Ethernet documentMadalin Bucur2017-05-301-0/+194
| | | | | | | | | | | | Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: avoid crash on PCI error recovery pathGuilherme G. Piccoli2017-05-302-10/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During PCI error recovery process, specifically on eeh_err_detected() we might have a NULL netdev struct, hence a direct dereference will lead to a kernel oops. This was observed with latest upstream kernel (v4.12-rc2) on Chelsio adapter T422-CR in PowerPC machines. This patch checks for NULL pointer and avoids the crash, both in eeh_err_detected() and eeh_resume(). Also, we avoid to trigger a fatal error or to try disabling interrupts on FW during PCI error recovery, because: (a) driver might not be able to accurately access PCI regions in this case, and (b) trigger a fatal error _during_ the recovery steps is a mistake that could prevent the recovery path to complete successfully. Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2017-05-304-16/+24
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Conntrack SCTP CRC32c checksum mangling may operate on non-linear skbuff, patch from Davide Caratti. 2) nf_tables rb-tree set backend does not handle element re-addition after deletion in the same transaction, leading to infinite loop. 3) Atomically unclear the IPS_SRC_NAT_DONE_BIT on nat module removal, from Liping Zhang. 4) Conntrack hashtable resizing while ctnetlink dump is progress leads to a dead reference to released objects in the lists, also from Liping. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 18:23:44 +0100