summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* PCI: qcom: Reorder to put v0 functions together, v1 functions together, etcBjorn Helgaas2017-07-031-61/+61
| | | | | | Previously the v0, v1, and v2 functions were not grouped together in a consistent order. Reorder them to make them consistent. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: qcom: Add support for IPQ4019 PCIe controllerJohn Crispin2017-07-032-1/+325
| | | | | | | | | | | | | | | Add support for the IPQ4019 PCIe controller. IPQ4019 supports Gen 1/2, one lane, one PCIe root complex with support for MSI and legacy interrupts, and it conforms to PCI Express Base 2.1 specification. The core init is the same as for the MSM8996, however the clocks and reset lines differ. [bhelgaas: fix qcom_pcie_get_resources_v3(), qcom_pcie_init_v3() compile issues] Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Acked-by: Rob Herring <robh@kernel.org> # binding
* arm64: PCI: Drop DT IRQ allocation from pcibios_alloc_irq()Lorenzo Pieralisi2017-07-021-6/+4
| | | | | | | | | | | | | | | | | | | | With the introduction of struct pci_host_bridge.map_irq pointer it is possible to assign IRQs for all devices originating from a PCI host bridge at probe time; this is implemented through pci_assign_irq() that relies on the struct pci_host_bridge.map_irq pointer to map IRQ for a given device. The benefits this brings are twofold: - the IRQ for a device is assigned once at probe time - the IRQ assignment works also for hotplugged devices With all DT based PCI host bridges converted to the struct pci_host_bridge.{map/swizzle}_irq hooks mechanism the DT IRQ allocation in ARM64 pcibios_alloc_irq() is now redundant and can be removed. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Will Deacon <will.deacon@arm.com>
* PCI: xilinx-nwl: Move to struct pci_host_bridge IRQ mapping functionsLorenzo Pieralisi2017-07-021-0/+2
| | | | | | | | | | | | | | | | struct pci_host_bridge gained hooks to map/swizzle IRQs, so that the IRQ mapping can be done automatically by PCI core code through the pci_assign_irq() function instead of resorting to arch-specific implementation callbacks to carry out the same task which force PCI host bridge drivers implementation to implement per-arch kludges to carry out a task that is inherently architecture agnostic. Add map/swizzle IRQs hooks to the xilinx-nwl PCI host driver to move the IRQ allocation into core code and stop relying on arch-specific callbacks. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
* PCI: rockchip: Move to struct pci_host_bridge IRQ mapping functionsLorenzo Pieralisi2017-07-021-0/+2
| | | | | | | | | | | | | | | | | struct pci_host_bridge gained hooks to map/swizzle IRQs, so that the IRQ mapping can be done automatically by PCI core code through the pci_assign_irq() function instead of resorting to arch-specific implementation callbacks to carry out the same task which force PCI host bridge drivers implementation to implement per-arch kludges to carry out a task that is inherently architecture agnostic. Add map/swizzle IRQs hooks to the rockchip PCI host driver to move the IRQ allocation into core code and stop relying on arch-specific callbacks. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Wenrui Li <wenrui.li@rock-chips.com> Cc: Shawn Lin <shawn.lin@rock-chips.com>
* PCI: xgene: Move to struct pci_host_bridge IRQ mapping functionsLorenzo Pieralisi2017-07-021-0/+2
| | | | | | | | | | | | | | | | | struct pci_host_bridge gained hooks to map/swizzle IRQs, so that the IRQ mapping can be done automatically by PCI core code through the pci_assign_irq() function instead of resorting to arch-specific implementation callbacks to carry out the same task which force PCI host bridge drivers implementation to implement per-arch kludges to carry out a task that is inherently architecture agnostic. Add map/swizzle IRQs hooks to the xgene PCI host driver to move the IRQ allocation into core code and stop relying on arch-specific callbacks. Tested-by: Khuong Dinh <kdinh@apm.com> # with e1000e Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Tanmay Inamdar <tinamdar@apm.com>
* PCI: altera: Drop pci_fixup_irqs()Lorenzo Pieralisi2017-07-021-2/+2
| | | | | | | | | | | | Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation. Drop pci_fixup_irqs() usage from PCI altera host bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ley Foon Tan <lftan@altera.com>
* PCI: versatile: Drop pci_fixup_irqs()Lorenzo Pieralisi2017-07-021-2/+2
| | | | | | | | | | | | | | Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation. Drop pci_fixup_irqs() usage from PCI versatile host bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: folded in typo fix from Arnd Bergmann <arnd@arndb.de>: http://lkml.kernel.org/r/20170621215323.3921382-4-arnd@arndb.de] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rob Herring <robh@kernel.org>
* PCI: generic: Drop pci_fixup_irqs()Lorenzo Pieralisi2017-07-021-4/+2
| | | | | | | | | | | | Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation. Drop pci_fixup_irqs() usage from PCI host-common bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Will Deacon <will.deacon@arm.com>
* PCI: faraday: Drop pci_fixup_irqs()Lorenzo Pieralisi2017-07-021-1/+2
| | | | | | | | | | | | Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation. Drop pci_fixup_irqs() usage from PCI ftpci100 host bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Linus Walleij <linus.walleij@linaro.org>
* PCI: designware: Drop pci_fixup_irqs()Lorenzo Pieralisi2017-07-021-5/+2
| | | | | | | | | | | | | Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation. Drop pci_fixup_irqs() usage from PCI designware host bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Joao Pinto <Joao.Pinto@synopsys.com>
* PCI: iproc: Drop pci_fixup_irqs()Lorenzo Pieralisi2017-07-021-3/+2
| | | | | | | | | | | | | | Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation. Drop pci_fixup_irqs() usage from PCI iproc host bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Jon Mason <jonmason@broadcom.com>
* PCI: rcar: Drop pci_fixup_irqs()Lorenzo Pieralisi2017-07-021-2/+2
| | | | | | | | | | | | Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation. Drop pci_fixup_irqs() usage from PCI rcar host bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Simon Horman <horms@verge.net.au>
* PCI: xilinx: Drop pci_fixup_irqs()Lorenzo Pieralisi2017-07-021-3/+2
| | | | | | | | | | | | Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation. Drop pci_fixup_irqs() usage from PCI xilinx host bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com>
* PCI: tegra: Drop pci_fixup_irqs()Lorenzo Pieralisi2017-07-021-1/+2
| | | | | | | | | | | | Since, through struct pci_host_bridge.map/swizzle_irq hooks, IRQs are now allocated in the pci_assign_irq() callback automatically, PCI host bridge drivers can stop relying on pci_fixup_irqs() for IRQ allocation Drop pci_fixup_irqs() usage from PCI tegra host bridge driver. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thierry Reding <thierry.reding@gmail.com>
* ARM/PCI: Remove pci_fixup_irqs() call for bios32 host controllersLorenzo Pieralisi2017-07-021-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Legacy PCI host controllers (ie host controllers that set-up the PCI bus through the ARM pci_common_init() API) are currently relying on pci_fixup_irqs() to assign legacy PCI irqs to devices. This is not ideal in that pci_fixup_irqs() assigns IRQs for all PCI devices present in a given system some of which may well be enabled by the time pci_fixup_irqs() is called (ie a system with multiple host controllers). With the introduction of struct pci_host_bridge.(*map_irq) pointer it is possible to assign IRQs for all devices originating from a PCI host bridge at probe time; this is implemented through pci_assign_irq() that relies on the struct pci_host_bridge.map_irq pointer to map IRQ for a given device. The benefits this brings are twofold: - the IRQ for a device is assigned once at probe time - the IRQ assignment works also for hotplugged devices Remove pci_fixup_irqs() call from bios32 code and rely on pci_assign_irq() to carry out the IRQ mapping at device probe time. The map_irq() and swizzle_irq() struct pci_host_bridge callbacks are set-up in the struct pci_host_bridge created in the bios32 pcibios_init_hw() function and mach-* code paths (for PCI mach implementations that require a specific struct hw_pci.(*scan) function callback). Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: folded in fixes from Lorenzo: http://lkml.kernel.org/r/20170701140629.GC8977@red-moon] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Andrew Lunn <andrew@lunn.ch>
* PCI: Add a call to pci_assign_irq() in pci_device_probe()Matthew Minter2017-07-021-0/+2
| | | | | | | | | | | | | | | | | | The pci_assign_irq() function allows assignment of an IRQ to devices during device enable time rather than only at boot. Therefore call it in the pci_device_probe() function during the enable device code path so this assignment can be performed. This patch will do nothing on arches which do not set the IRQ mapping function pointers and is therefore currently a nop, however as support for these function pointers is added to arch-specific code this will cause IRQ assignment to migrate to device enable time allowing the new code paths to be used. Signed-off-by: Matthew Minter <matt@masarand.com> [lorenzo.pieralisi@arm.com: moved pci_assign_irq() call site] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* OF/PCI: Update of_irq_parse_and_map_pci() commentMatthew Minter2017-07-021-1/+2
| | | | | | | | | | | With the introduction of struct pci_host_bridge.(*map_irq) function pointer add another direct usage of of_irq_parse_and_map_pci(). Update the function comment to reflect this behaviour. Signed-off-by: Matthew Minter <matt@masarand.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Add pci_assign_irq() function and have pci_fixup_irqs() use itMatthew Minter2017-07-022-10/+36
| | | | | | | | | | | | | | | | | | Here we delete the static pdev_fixup_irq() function which is currently what pci_fixup_irqs() uses to actually assign the IRQs and replace it with the pci_assign_irq() function which changes the interface and uses the new function pointers stored in the host bridge structure. Eventually this will allow pci_fixup_irqs() to be removed entirely and the new deferred assignment code path will call pci_assign_irq() directly. However to ensure current users continue to work, a new implementation of pci_fixup_irqs() is introduced which simply wraps the functionality of pci_assign_irq(). Signed-off-by: Matthew Minter <matt@masarand.com> [lorenzo.pieralisi@arm.com: reworked comments/log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Add IRQ mapping function pointers to pci_host_bridge structMatthew Minter2017-07-021-0/+2
| | | | | | | | | In order to defer IRQ assignment arches must be able to register functions to map and swizzle interrupts. These registered functions are stored in the pci_host_bridge struct. Signed-off-by: Matthew Minter <matt@masarand.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Build setup-irq.o on all archesMatthew Minter2017-07-021-15/+2
| | | | | | | | | | The functions included in setup-irq.o currently apply only to a selection of architectures which share common IRQ assignment code. However this code needs to be generalised for all arches to allow deferred IRQ assignment. So the first step is to build it on all architectures. Signed-off-by: Matthew Minter <matt@masarand.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Remove pci_scan_root_bus_msi()Lorenzo Pieralisi2017-07-022-26/+5
| | | | | | | | | | | | | | | The pci_scan_root_bus_bridge() function allows passing a parameterized struct pci_host_bridge and scanning the resulting PCI bus; since the struct msi_controller is part of the struct pci_host_bridge and the struct pci_host_bridge can now be passed to pci_scan_root_bus_bridge() explicitly, there is no need for a scan interface with a MSI controller parameter. With all PCI host controller drivers and platform code relying on pci_scan_root_bus_msi() converted over to pci_scan_root_bus_bridge() the pci_scan_root_bus_msi() becomes obsolete and can be removed. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: xilinx-nwl: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-10/+18
| | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI xilinx-nwl host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
* PCI: rockchip: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-6/+16
| | | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI rockchip host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Wenrui Li <wenrui.li@rock-chips.com> Cc: Shawn Lin <shawn.lin@rock-chips.com>
* PCI: generic: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-5/+18
| | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI host-common code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Will Deacon <will.deacon@arm.com>
* PCI: xgene: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-6/+15
| | | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI xgene host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Tested-by: Khuong Dinh <kdinh@apm.com> # with e1000e Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Tanmay Inamdar <tinamdar@apm.com>
* PCI: xilinx: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-10/+19
| | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI xilinx host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Michal Simek <michal.simek@xilinx.com>
* PCI: altera: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-6/+16
| | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI altera host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Ley Foon Tan <lftan@altera.com>
* PCI: versatile: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-3/+17
| | | | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI versatile host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: folded in fix from Arnd Bergmann <arnd@arndb.de>: http://lkml.kernel.org/r/20170621215323.3921382-3-arnd@arndb.de] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rob Herring <robh@kernel.org>
* PCI: iproc: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-023-22/+30
| | | | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI iproc host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Jon Mason <jonmason@broadcom.com>
* PCI: rcar: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-14/+24
| | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI rcar host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Simon Horman <horms@verge.net.au>
* PCI: aardvark: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-6/+15
| | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI aardvark host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* PCI: designware: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-07-021-14/+22
| | | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert PCI designware host code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Joao Pinto <Joao.Pinto@synopsys.com>
* ARM/PCI: Convert PCI scan API to pci_scan_root_bus_bridge()Lorenzo Pieralisi2017-06-288-46/+91
| | | | | | | | | | | | | | | | | | | | | The introduction of pci_scan_root_bus_bridge() provides a PCI core API to scan a PCI root bus backed by an already initialized struct pci_host_bridge object, which simplifies the bus scan interface and makes the PCI scan root bus interface easier to generalize as members are added to the struct pci_host_bridge. Convert ARM bios32 code to pci_scan_root_bus_bridge() to improve the PCI root bus scanning interface. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: fold in warning fix from Arnd Bergmann <arnd@arndb.de>: http://lkml.kernel.org/r/20170621215323.3921382-1-arnd@arndb.de] [bhelgaas: set bridge->ops for mv78xx0] [bhelgaas: fold in fixes from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>: http://lkml.kernel.org/r/20170701135457.GB8977@red-moon] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Andrew Lunn <andrew@lunn.ch>
* PCI: Make pci_register_host_bridge() PCI core internalLorenzo Pieralisi2017-06-284-9/+4
| | | | | | | | | | | | | With the introduction of pci_scan_root_bus_bridge() there is no need to export pci_register_host_bridge() to other kernel subsystems other than the PCI compilation unit that needs it. Make pci_register_host_bridge() static to its compilation unit and convert the existing drivers usage over to pci_scan_root_bus_bridge(). Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Arnd Bergmann <arnd@arndb.de>
* PCI: Add pci_scan_root_bus_bridge() interfaceLorenzo Pieralisi2017-06-282-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current pci_scan_root_bus() interface is made up of two main code paths: - pci_create_root_bus() - pci_scan_child_bus() pci_create_root_bus() is a wrapper function that allows to create a struct pci_host_bridge structure, initialize it with the passed parameters and register it with the kernel. As the struct pci_host_bridge require additional struct members, pci_create_root_bus() parameters list has grown in time, making it unwieldy to add further parameters to it in case the struct pci_host_bridge gains more members fields to augment its functionality. Since PCI core code provides functions to allocate struct pci_host_bridge, instead of forcing the pci_create_root_bus() interface to add new parameters to cater for new struct pci_host_bridge functionality, it is more suitable to add an interface in PCI core code to scan a PCI bus straight from a struct pci_host_bridge created and customized by each specific PCI host controller driver. Add a pci_scan_root_bus_bridge() function to allow PCI host controller drivers to create and initialize struct pci_host_bridge and scan the resulting bus. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Arnd Bergmann <arnd@arndb.de>
* PCI: tegra: Fix host bridge memory leakageLorenzo Pieralisi2017-06-281-1/+1
| | | | | | | | | | | | | When probing the PCI host controller driver, if an error occurs, the probe function code does not free memory allocated for the struct pci_host_bridge resulting in memory leakage. Move the struct pci_host_bridge allocation over to the respective devm interface to fix the issue. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Arnd Bergmann <arnd@arndb.de>
* PCI: faraday: Fix host bridge memory leakageLorenzo Pieralisi2017-06-281-1/+1
| | | | | | | | | | | | | | When probing the PCI host controller driver, if an error occurs, the probe function code does not free memory allocated for the struct pci_host_bridge resulting in memory leakage. Move the struct pci_host_bridge allocation over to the respective devm interface to fix the issue. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de>
* PCI: Add devm_pci_alloc_host_bridge() interfaceLorenzo Pieralisi2017-06-283-2/+25
| | | | | | | | | | | | Struct pci_host_bridge can be allocated by PCI host bridge drivers which usually allocate and map memory through devm managed interfaces. Add a devm version for the pci_alloc_host_bridge() interface to simplify PCI host controller driver porting and simplify the driver failure paths. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Arnd Bergmann <arnd@arndb.de>
* PCI: Add pci_free_host_bridge() interfaceLorenzo Pieralisi2017-06-282-3/+10
| | | | | | | | | | | | | | Commit a52d1443bba1 ("PCI: Export host bridge registration interface") exported the pci_alloc_host_bridge() interface so that PCI host controllers drivers can make use of it. Introduce pci_alloc_host_bridge() kernel counterpart to free the host bridge data structures, pci_free_host_bridge(), export it and update kernel functions releasing host bridge objects allocated memory to make use of it. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Arnd Bergmann <arnd@arndb.de>
* PCI: Initialize bridge release function at bridge allocationLorenzo Pieralisi2017-06-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The introduction of pci_register_host_bridge() kernel interface allows PCI host controller drivers to create the struct pci_host_bridge object, initialize it and register it with the kernel so that its corresponding PCI bus can be scanned and its devices probed. The host bridge device release function pci_release_host_bridge_dev() is a static function common for all struct pci_host_bridge allocated objects, so in its current form cannot be used by PCI host bridge controllers drivers to initialize the allocated struct pci_host_bridge, which leaves struct pci_host_bridge devices release function uninitialized. Since pci_release_host_bridge_dev() is a function common to all PCI host bridge objects, initialize it in pci_alloc_host_bridge() (ie common host bridge allocation interface) so that all struct pci_host_bridge objects have their release function initialized by default at allocation time, removing the need for exporting the common pci_release_host_bridge_dev() function to other compilation units. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Arnd Bergmann <arnd@arndb.de>
* PCI: faraday: Convert IRQ masking to raw PCI config accessorsLorenzo Pieralisi2017-06-281-33/+48
| | | | | | | | | | | | | | | | | | | | | Current ftpci100 driver host bridge controller driver requires struct pci_bus to be created in order to mask and clear IRQs using standard PCI bus config accessors. This struct pci_bus dependency is fictitious and burdens the driver with unneeded constraints (eg to use separate APIs to create and scan the root bus). Add PCI raw config space accessors to PCIe ftpci100 driver and remove the fictitious struct pci_bus dependency. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: folded in raw PCI read accessor from http://lkml.kernel.org/r/20170621162651.25315-1-linus.walleij@linaro.org The clock piece of the above posting goes with the separate "Add clock handling" patch.] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* PCI: iproc: Convert link check to raw PCI config accessorsLorenzo Pieralisi2017-06-281-20/+74
| | | | | | | | | | | | | | | | | | | The current iproc driver host bridge controller driver requires struct pci_bus to be created in order to carry out PCI link checks with standard PCI config space accessors. This struct pci_bus dependency is fictitious and burdens the driver with unneeded constraints (eg to use separate APIs to create and scan the root bus). Add PCI raw config space accessors to the iproc driver and remove the fictitious struct pci_bus dependency. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Jon Mason <jonmason@broadcom.com>
* PCI: xilinx-nwl: Remove nwl_pcie_enable_msi() unused bus parameterLorenzo Pieralisi2017-06-281-2/+2
| | | | | | | | | | | The nwl_pcie_enable_msi() second parameter (ie "bus") is unused and creates a fake dependency on the struct pci_bus that need not exist. Remove it. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
* Linux 4.12-rc1v4.12-rc1Linus Torvalds2017-05-131-2/+2
|
* Merge branch 'for-linus' of ↵Linus Torvalds2017-05-135-7/+445
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull some more input subsystem updates from Dmitry Torokhov: "An updated xpad driver with a few more recognized device IDs, and a new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads via SPI bus" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cros_ec_keyb - remove extraneous 'const' Input: add support for PlayStation 1/2 joypads connected via SPI Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Input: xpad - sync supported devices with xboxdrv Input: xpad - sort supported devices by USB ID
| * Input: cros_ec_keyb - remove extraneous 'const'Arnd Bergmann2017-05-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | gcc-7 warns about 'const SIMPLE_DEV_PM_OPS', as that macro already contains a 'const' keyword: drivers/input/keyboard/cros_ec_keyb.c:663:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume); This removes the extra one. Fixes: 6af6dc2d2aa6 ("input: Add ChromeOS EC keyboard driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: add support for PlayStation 1/2 joypads connected via SPITomohiro Yoshidomi2017-05-103-0/+423
| | | | | | | | | | | | | | | | PlayStation 1/2 joypads can be connected directly to the SPI interface. Signed-off-by: Tomohiro Yoshidomi <sylph23k@gmail.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer SabertoothBenjamin Valentin2017-05-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add USB IDs for two more Xbox 360 controllers. I found them in the pull requests for the xboxdrv userspace driver, which seems abandoned. Thanks to psychogony and mkaito for reporting the IDs there! Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: xpad - sync supported devices with xboxdrvBenjamin Valentin2017-05-071-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The userspace xboxdrv driver [0] contains some USB IDs unknown to the kernel driver. I have created a simple script [1] to extract the missing devices and add them to xpad. A quick google search confirmed that all the new devices called Fightstick/pad are Arcade-type devices [2] where the MAP_TRIGGERS_TO_BUTTONS option should apply. There are some similar devices in the existing device table where this flag is not set, but I did refrain from changing those. [0] https://github.com/xboxdrv/xboxdrv/blob/stable/src/xpad_device.cpp [1] http://codepad.org/CHV98BNH [2] https://www.google.com/search?q=SFxT+Fightstick+Pro&tbm=isch Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Reviewed-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 12:26:12 +0100