summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* dmatest: restore ability to start test at module load and initDan Williams2013-11-142-167/+116
| | | | | | | | | | | | | | | | | 1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmatest: cleanup redundant "dmatest: " prefixesDan Williams2013-11-141-11/+10
| | | | | | | | | ...now that we have a common pr_fmt. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmatest: replace stored results mechanism, with uniform messagesDan Williams2013-11-142-221/+46
| | | | | | | | | | For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* Revert "dmatest: append verify result to results"Dan Williams2013-11-142-133/+53
| | | | | | | | | | | | | | This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmaengine: remove DMA unmap flagsBartlomiej Zolnierkiewicz2013-11-1418-67/+27
| | | | | | | | | | | | | | | | | | Remove no longer needed DMA unmap flags: - DMA_COMPL_SKIP_SRC_UNMAP - DMA_COMPL_SKIP_DEST_UNMAP - DMA_COMPL_SRC_UNMAP_SINGLE - DMA_COMPL_DEST_UNMAP_SINGLE Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jon Mason <jon.mason@intel.com> Acked-by: Mark Brown <broonie@linaro.org> [djbw: clean up straggling skip unmap flags in ntb] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmaengine: remove DMA unmap from driversBartlomiej Zolnierkiewicz2013-11-1417-846/+3
| | | | | | | | | | | | | Remove support for DMA unmapping from drivers as it is no longer needed (DMA core code is now handling it). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [djbw: fix up chan2parent() unused warning in drivers/dma/dw/core.c] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* NTB: convert to dmaengine_unmap_dataBartlomiej Zolnierkiewicz2013-11-141-27/+58
| | | | | | | | | | | | | Use the generic unmap object to unmap dma buffers. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jon Mason <jon.mason@intel.com> [djbw: fix up unmap len, and GFP flags] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* async_pq_val: convert to dmaengine_unmap_dataDan Williams2013-11-141-23/+35
| | | | | | | | | | | | Use the generic unmap object to unmap dma buffers. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* async_pq: convert to dmaengine_unmap_dataDan Williams2013-11-142-53/+69
| | | | | | | | | | | | | Use the generic unmap object to unmap dma buffers. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [bzolnier: keep temporary dma_dest array in do_async_gen_syndrome()] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* async_raid6_recov: convert to dmaengine_unmap_dataDan Williams2013-11-141-20/+49
| | | | | | | | | | | | | Use the generic unmap object to unmap dma buffers. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [bzolnier: keep temporary dma_dest array in async_mult()] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* async_xor_val: convert to dmaengine_unmap_dataDan Williams2013-11-141-13/+17
| | | | | | | | | | | | | Use the generic unmap object to unmap dma buffers. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [bzolnier: minor cleanups] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* async_xor: convert to dmaengine_unmap_dataDan Williams2013-11-141-44/+51
| | | | | | | | | | | | | | | | Use the generic unmap object to unmap dma buffers. Later we can push this unmap object up to the raid layer and get rid of the 'scribble' parameter. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [bzolnier: minor cleanups] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* async_memcpy: convert to dmaengine_unmap_dataDan Williams2013-11-143-18/+42
| | | | | | | | | | | | | | | Use the generic unmap object to unmap dma buffers. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [bzolnier: add missing unmap->len initialization] [bzolnier: fix whitespace damage] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [djbw: add DMA_ENGINE=n support] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmaengine: reference counted unmap dataDan Williams2013-11-142-9/+150
| | | | | | | | | | | | | | | | | | | | | Hang a common 'unmap' object off of dma descriptors for the purpose of providing a unified unmapping interface. The lifetime of a mapping may span multiple descriptors, so these unmap objects are reference counted by related descriptor. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> [bzolnier: fix IS_ENABLED() check] [bzolnier: fix release ordering in dmaengine_destroy_unmap_pool()] [bzolnier: fix check for success in dmaengine_init_unmap_pool()] [bzolnier: use mempool_free() instead of kmem_cache_free()] [bzolnier: add missing unmap->len initializations] [bzolnier: add __init tag to dmaengine_init_unmap_pool()] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [djbw: move DMAENGINE=n support to this patch for async_tx] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmaengine: prepare for generic 'unmap' dataDan Williams2013-11-1415-0/+41
| | | | | | | | | | | | | | | | Add a hook for a common dma unmap implementation to enable removal of the per driver custom unmap code. (A reworked version of Bartlomiej Zolnierkiewicz's patches to remove the custom callbacks and the size increase of dma_async_tx_descriptor for drivers that don't care about raid). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> [bzolnier: prepare pl330 driver for adding missing unmap while at it] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmaengine: consolidate memcpy apisDan Williams2013-11-141-92/+45
| | | | | | | | | | | | | | Copying from page to page (dma_async_memcpy_pg_to_pg) is the superset, make the other two apis use that one in preparation for providing a common dma unmap implementation. The common implementation just wants to assume all buffers are mapped with dma_map_page(). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmatest: make driver unmap also source buffers by itselfBartlomiej Zolnierkiewicz2013-11-131-5/+5
| | | | | | | | | | | | | | | | Make the driver DMA unmap also source buffers by itself (currently it DMA unmaps only destination buffers) as a preparation for introducing generic 'ummap' data. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* Linux 3.12-rc6v3.12-rc6Linus Torvalds2013-10-191-1/+1
|
* Merge branch 'for-linus' of ↵Linus Torvalds2013-10-191-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fix from Chris Mason: "Sage hit a deadlock with ceph on btrfs, and Josef tracked it down to a regression in our initial rc1 pull. When doing nocow writes we were sometimes starting a transaction with locks held" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: release path before starting transaction in can_nocow_extent
| * Btrfs: release path before starting transaction in can_nocow_extentJosef Bacik2013-10-181-0/+1
| | | | | | | | | | | | | | | | | | We can't be holding tree locks while we try to start a transaction, we will deadlock. Thanks, Reported-by: Sage Weil <sage@inktank.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* | Merge tag 'pm+acpi-3.12-rc6' of ↵Linus Torvalds2013-10-1810-196/+15
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - intel_pstate fix for misbehavior after system resume if sysfs attributes are set in a specific way before the corresponding suspend from Dirk Brandewie. - A recent intel_pstate fix has no effect if unsigned long is 32-bit, so fix it up to cover that case as well. - The s3c64xx cpufreq driver was not updated when the index field of struct cpufreq_frequency_table was replaced with driver_data, so update it now. From Charles Keepax. - The Kconfig help text for ACPI_BUTTON still refers to /proc/acpi/event that has been dropped recently, so modify it to remove that reference. From Krzysztof Mazur. - A Lan Tianyu's change adds a missing mutex unlock to an error code path in acpi_resume_power_resources(). - Some code related to ACPI power resources, whose very purpose is questionable to put it lightly, turns out to cause problems to happen during testing on real systems, so remove it completely (we may revisit that in the future if there's a compelling enough reason). From Rafael J Wysocki and Aaron Lu. * tag 'pm+acpi-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Drop two functions that are not used any more ATA / ACPI: remove power dependent device handling cpufreq: s3c64xx: Rename index to driver_data ACPI / power: Drop automaitc resume of power resource dependent devices intel_pstate: Fix type mismatch warning cpufreq / intel_pstate: Fix max_perf_pct on resume ACPI: remove /proc/acpi/event from ACPI_BUTTON help ACPI / power: Release resource_lock after acpi_power_get_state() return error
| * \ Merge branch 'acpi-fixes'Rafael J. Wysocki2013-10-188-188/+7
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * acpi-fixes: ACPI / PM: Drop two functions that are not used any more ATA / ACPI: remove power dependent device handling ACPI / power: Drop automaitc resume of power resource dependent devices ACPI: remove /proc/acpi/event from ACPI_BUTTON help ACPI / power: Release resource_lock after acpi_power_get_state() return error
| | * | ACPI / PM: Drop two functions that are not used any moreRafael J. Wysocki2013-10-173-64/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two functions defined in device_pm.c, acpi_dev_pm_add_dependent() and acpi_dev_pm_remove_dependent(), have no callers and may be dropped, so drop them. Moreover, they are the only functions adding entries to and removing entries from the power_dependent list in struct acpi_device, so drop that list too. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | ATA / ACPI: remove power dependent device handlingAaron Lu2013-10-173-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, we wanted SCSI devices corrsponding to ATA devices to be runtime resumed when the power resource for those ATA device was turned on by some other device, so we added the SCSI device to the dependent device list of the ATA device's ACPI node. However, this code has no effect after commit 41863fc (ACPI / power: Drop automaitc resume of power resource dependent devices) and the mechanism it was supposed to implement is regarded as a bad idea now, so drop it. [rjw: Changelog] Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | ACPI / power: Drop automaitc resume of power resource dependent devicesRafael J. Wysocki2013-10-161-99/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mechanism causing devices depending on a given power resource (that is, devices that can be in D0 only if that power resource is on) to be resumed automatically when the power resource is turned on (and their "inferred" power state becomes D0 as a result) is inherently racy and in fact unnecessary. It is racy, because if the power resource is turned on and then immediately off, the device resume triggered by the first transition to "on" may still happen, causing the power resource to be turned on again. That again will trigger the "resume of dependent devices" mechanism, but if the devices in question are not in use, they will be suspended in the meantime causing the power resource to be turned off. However, the "resume of dependent devices" will next resume them again and so on. In some cases (USB port PM in particular) that leads to an endless busy loop of flipping the resource on and off continuously. It is needless, because whoever turns a power resource on will most likely turn it off at some point and the devices that go into "D0" as a result of turning it on will then go back into D3cold (generally, the state they were in before). Moreover, turning on all power resources a device needs to go into D0 is not sufficient for a full transition into D0 in general. Namely, _PS0 may need to be executed in addition to that in some cases. This means that the whole rationale of the "resume of dependent devices" mechanism was incorrect to begin with and it's best to remove it entirely. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | ACPI: remove /proc/acpi/event from ACPI_BUTTON helpKrzysztof Mazur2013-10-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1696d9d (ACPI: Remove the old /proc/acpi/event interface) left /proc/acpi/event in the ACPI_BUTTON help in Kconfig, so remove it from there. [rjw: Changelog] Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | ACPI / power: Release resource_lock after acpi_power_get_state() return errorLan Tianyu2013-10-161-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In acpi_resume_power_resources() resource_lock should be released when acpi_power_get_state() fails and before passing to next power resource on the list. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | Merge branch 'pm-fixes'Rafael J. Wysocki2013-10-182-8/+8
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | * pm-fixes: cpufreq: s3c64xx: Rename index to driver_data intel_pstate: Fix type mismatch warning cpufreq / intel_pstate: Fix max_perf_pct on resume
| | * | cpufreq: s3c64xx: Rename index to driver_dataCharles Keepax2013-10-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The index field of cpufreq_frequency_table has been renamed to driver_data by commit 5070158 (cpufreq: rename index as driver_data in cpufreq_frequency_table). This patch updates the s3c64xx driver to match. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | intel_pstate: Fix type mismatch warningRafael J. Wysocki2013-10-161-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The expression in line 398 of intel_pstate.c causes the following warning to be emitted: drivers/cpufreq/intel_pstate.c:398:3: warning: left shift count >= width of type which happens because unsigned long is 32-bit on some architectures. Fix that by using a helper u64 variable and simplify the code slightly. Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | cpufreq / intel_pstate: Fix max_perf_pct on resumeDirk Brandewie2013-10-161-4/+3
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the system is suspended while max_perf_pct is less than 100 percent or no_turbo set policy->{min,max} will be set incorrectly with scaled values which turn the scaled values into hard limits. References: https://bugzilla.kernel.org/show_bug.cgi?id=61241 Reported-by: Patrick Bartels <petzicus@googlemail.com> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Cc: 3.9+ <stable@vger.kernel.org> # 3.9+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2013-10-182-1/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixlets: - fix a (rare-config) build bug - fix a next-gen SGI/UV hw/firmware enumeration bug" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Update UV3 hub revision ID x86/microcode: Correct Kconfig dependencies
| * | | x86: Update UV3 hub revision IDRuss Anderson2013-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UV3 hub revision ID is different than expected. The first revision was supposed to start at 1 but instead will start at 0. Signed-off-by: Russ Anderson <rja@sgi.com> Cc: <stable@kernel.org> # v3.9, v3.10, v3.11 Link: http://lkml.kernel.org/r/20131014161733.GA6274@sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | x86/microcode: Correct Kconfig dependenciesBorislav Petkov2013-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have a randconfig here which has enabled only CONFIG_MICROCODE=y CONFIG_MICROCODE_OLD_INTERFACE=y with both # CONFIG_MICROCODE_INTEL is not set # CONFIG_MICROCODE_AMD is not set off. Which makes building the microcode functionality a little pointless. Don't do that in such cases then. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1381682189-14470-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | | Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds2013-10-188-21/+93
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull CIFS fixes from Steve French: "Five small cifs fixes (includes fixes for: unmount hang, 2 security related, symlink, large file writes)" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: cifs: ntstatus_to_dos_map[] is not terminated cifs: Allow LANMAN auth method for servers supporting unencapsulated authentication methods cifs: Fix inability to write files >2GB to SMB2/3 shares cifs: Avoid umount hangs with smb2 when server is unresponsive do not treat non-symlink reparse points as valid symlinks
| * | | | cifs: ntstatus_to_dos_map[] is not terminatedTim Gardner2013-10-141-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Functions that walk the ntstatus_to_dos_map[] array could run off the end. For example, ntstatus_to_dos() loops while ntstatus_to_dos_map[].ntstatus is not 0. Granted, this is mostly theoretical, but could be used as a DOS attack if the error code in the SMB header is bogus. [Might consider adding to stable, as this patch is low risk - Steve] Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Steve French <smfrench@gmail.com>
| * | | | cifs: Allow LANMAN auth method for servers supporting unencapsulated ↵Sachin Prabhu2013-10-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | authentication methods This allows users to use LANMAN authentication on servers which support unencapsulated authentication. The patch fixes a regression where users using plaintext authentication were no longer able to do so because of changed bought in by patch 3f618223dc0bdcbc8d510350e78ee2195ff93768 https://bugzilla.redhat.com/show_bug.cgi?id=1011621 Reported-by: Panos Kavalagios <Panagiotis.Kavalagios@eurodyn.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
| * | | | cifs: Fix inability to write files >2GB to SMB2/3 sharesJan Klos2013-10-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When connecting to SMB2/3 shares, maximum file size is set to non-LFS maximum in superblock. This is due to cap_large_files bit being different for SMB1 and SMB2/3 (where it is just an internal flag that is not negotiated and the SMB1 one corresponds to multichannel capability, so maybe LFS works correctly if server sends 0x08 flag) while capabilities are checked always for the SMB1 bit in cifs_read_super(). The patch fixes this by checking for the correct bit according to the protocol version. CC: Stable <stable@kernel.org> Signed-off-by: Jan Klos <honza.klos@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
| * | | | cifs: Avoid umount hangs with smb2 when server is unresponsiveShirish Pargaonkar2013-10-072-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not send SMB2 Logoff command when reconnecting, the way smb1 code base works. Also, no need to wait for a credit for an echo command when one is already in flight. Without these changes, umount command hangs if the server is unresponsive e.g. hibernating. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@us.ibm.com>
| * | | | do not treat non-symlink reparse points as valid symlinksSteve French2013-10-063-14/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Windows 8 and later can create NFS symlinks (within reparse points) which we were assuming were normal NTFS symlinks and thus reporting corrupt paths for. Add check for reparse points to make sure that they really are normal symlinks before we try to parse the pathname. We also should not be parsing other types of reparse points (DFS junctions etc) as if they were a symlink so return EOPNOTSUPP on those. Also fix endian errors (we were not parsing symlink lengths as little endian). This fixes commit d244bf2dfbebfded05f494ffd53659fa7b1e32c1 which implemented follow link for non-Unix CIFS mounts CC: Stable <stable@kernel.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* | | | | Merge tag 'driver-core-3.12-rc6' of ↵Linus Torvalds2013-10-171-2/+5
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is one fix for the hotplug memory path that resolves a regression when removing memory that showed up in 3.12-rc1" * tag 'driver-core-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Release device_hotplug_lock when store_mem_state returns EINVAL
| * | | | | driver core: Release device_hotplug_lock when store_mem_state returns EINVALYasuaki Ishimatsu2013-10-171-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When inserting a wrong value to /sys/devices/system/memory/memoryX/state file, following messages are shown. And device_hotplug_lock is never released. ================================================ [ BUG: lock held when returning to user space! ] 3.12.0-rc4-debug+ #3 Tainted: G W ------------------------------------------------ bash/6442 is leaving the kernel with locks still held! 1 lock held by bash/6442: #0: (device_hotplug_lock){+.+.+.}, at: [<ffffffff8146cbb5>] lock_device_hotplug_sysfs+0x15/0x50 This issue was introdued by commit fa2be40 (drivers: base: use standard device online/offline for state change). This patch releases device_hotplug_lcok when store_mem_state returns EINVAL. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> CC: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | | Merge tag 'usb-3.12-rc6' of ↵Linus Torvalds2013-10-1718-82/+343
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes and new device ids for 3.12-rc6 The largest change here is a bunch of new device ids for the option USB serial driver for new Huawei devices. Other than that, just some small bug fixes for issues that people have reported (run-time and build-time), nothing major" * tag 'usb-3.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: usb_phy_gen: refine conditional declaration of usb_nop_xceiv_register usb: misc: usb3503: Fix compile error due to incorrect regmap depedency usb/chipidea: fix oops on memory allocation failure usb-storage: add quirk for mandatory READ_CAPACITY_16 usb: serial: option: blacklist Olivetti Olicard200 USB: quirks: add touchscreen that is dazzeled by remote wakeup Revert "usb: musb: gadget: fix otg active status flag" USB: quirks.c: add one device that cannot deal with suspension USB: serial: option: add support for Inovia SEW858 device USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well. USB: support new huawei devices in option.c usb: musb: start musb on the udc side, too xhci: Fix spurious wakeups after S5 on Haswell xhci: fix write to USB3_PSSEN and XUSB2PRM pci config registers xhci: quirk for extra long delay for S4 xhci: Don't enable/disable RWE on bus suspend/resume.
| * | | | | | usb: usb_phy_gen: refine conditional declaration of usb_nop_xceiv_registerGuenter Roeck2013-10-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 3fa4d734 (usb: phy: rename nop_usb_xceiv => usb_phy_gen_xceiv) changed the conditional around the declaration of usb_nop_xceiv_register from #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) to #if IS_ENABLED(CONFIG_NOP_USB_XCEIV) While that looks the same, it is semantically different. The first expression is true if CONFIG_NOP_USB_XCEIV is built as module and if the including code is built as module. The second expression is true if code depending on CONFIG_NOP_USB_XCEIV if built as module or into the kernel. As a result, the arm:allmodconfig build fails with arch/arm/mach-omap2/built-in.o: In function `omap3_evm_init': arch/arm/mach-omap2/board-omap3evm.c:703: undefined reference to `usb_nop_xceiv_register' Fix the problem by reverting to the old conditional. Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | usb: misc: usb3503: Fix compile error due to incorrect regmap depedencyMatthew Dawson2013-10-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB3503 driver had an incorrect depedency on REGMAP, instead of REGMAP_I2C. This caused the build to fail since the necessary regmap i2c pieces were not available. Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | usb/chipidea: fix oops on memory allocation failureRussell King - ARM Linux2013-10-161-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CMA fails to initialize in v3.12-rc4, the chipidea driver oopses the kernel while trying to remove and put the HCD which doesn't exist: WARNING: CPU: 0 PID: 6 at /home/rmk/git/linux-rmk/arch/arm/mm/dma-mapping.c:511 __dma_alloc+0x200/0x240() coherent pool not initialised! Modules linked in: CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.12.0-rc4+ #56 Workqueue: deferwq deferred_probe_work_func Backtrace: [<c001218c>] (dump_backtrace+0x0/0x10c) from [<c0012328>] (show_stack+0x18/0x1c) r6:c05fd9cc r5:000001ff r4:00000000 r3:df86ad00 [<c0012310>] (show_stack+0x0/0x1c) from [<c05f3a4c>] (dump_stack+0x70/0x8c) [<c05f39dc>] (dump_stack+0x0/0x8c) from [<c00230a8>] (warn_slowpath_common+0x6c/0x8c) r4:df883a60 r3:df86ad00 [<c002303c>] (warn_slowpath_common+0x0/0x8c) from [<c002316c>] (warn_slowpath_fmt+0x38/0x40) r8:ffffffff r7:00001000 r6:c083b808 r5:00000000 r4:df2efe80 [<c0023134>] (warn_slowpath_fmt+0x0/0x40) from [<c00196bc>] (__dma_alloc+0x200/0x240) r3:00000000 r2:c05fda00 [<c00194bc>] (__dma_alloc+0x0/0x240) from [<c001982c>] (arm_dma_alloc+0x88/0xa0) [<c00197a4>] (arm_dma_alloc+0x0/0xa0) from [<c03e2904>] (ehci_setup+0x1f4/0x438) [<c03e2710>] (ehci_setup+0x0/0x438) from [<c03cbd60>] (usb_add_hcd+0x18c/0x664) [<c03cbbd4>] (usb_add_hcd+0x0/0x664) from [<c03e89f4>] (host_start+0xf0/0x180) [<c03e8904>] (host_start+0x0/0x180) from [<c03e7c34>] (ci_hdrc_probe+0x360/0x670 ) r6:df2ef410 r5:00000000 r4:df2c3010 r3:c03e8904 [<c03e78d4>] (ci_hdrc_probe+0x0/0x670) from [<c0311044>] (platform_drv_probe+0x20/0x24) [<c0311024>] (platform_drv_probe+0x0/0x24) from [<c030fcac>] (driver_probe_device+0x9c/0x234) ... ---[ end trace c88ccaf3969e8422 ]--- Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = c0004000 [00000028] *pgd=00000000 Internal error: Oops: 17 [#1] SMP ARM Modules linked in: CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 3.12.0-rc4+ #56 Workqueue: deferwq deferred_probe_work_func task: df86ad00 ti: df882000 task.ti: df882000 PC is at usb_remove_hcd+0x10/0x150 LR is at host_stop+0x1c/0x3c pc : [<c03cacec>] lr : [<c03e88e4>] psr: 60000013 sp : df883b50 ip : df883b78 fp : df883b74 r10: c11f4c54 r9 : c0836450 r8 : df30c400 r7 : fffffff4 r6 : df2ef410 r5 : 00000000 r4 : df2c3010 r3 : 00000000 r2 : 00000000 r1 : df86b0a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 2f29404a DAC: 00000015 Process kworker/u2:0 (pid: 6, stack limit = 0xdf882240) Stack: (0xdf883b50 to 0xdf884000) ... Backtrace: [<c03cacdc>] (usb_remove_hcd+0x0/0x150) from [<c03e88e4>] (host_stop+0x1c/0x3c) r6:df2ef410 r5:00000000 r4:df2c3010 [<c03e88c8>] (host_stop+0x0/0x3c) from [<c03e8aa0>] (ci_hdrc_host_destroy+0x1c/0x20) r5:00000000 r4:df2c3010 [<c03e8a84>] (ci_hdrc_host_destroy+0x0/0x20) from [<c03e7c80>] (ci_hdrc_probe+0x3ac/0x670) [<c03e78d4>] (ci_hdrc_probe+0x0/0x670) from [<c0311044>] (platform_drv_probe+0x20/0x24) [<c0311024>] (platform_drv_probe+0x0/0x24) from [<c030fcac>] (driver_probe_device+0x9c/0x234) [<c030fc10>] (driver_probe_device+0x0/0x234) from [<c030ff28>] (__device_attach+0x44/0x48) ... ---[ end trace c88ccaf3969e8423 ]--- Fix this so at least we can continue booting and get to a shell prompt. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | usb-storage: add quirk for mandatory READ_CAPACITY_16Oliver Neukum2013-10-163-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some USB drive enclosures do not correctly report an overflow condition if they hold a drive with a capacity over 2TB and are confronted with a READ_CAPACITY_10. They answer with their capacity modulo 2TB. The generic layer cannot cope with that. It must be told to use READ_CAPACITY_16 from the beginning. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | usb: serial: option: blacklist Olivetti Olicard200Enrico Mioso2013-10-161-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interface 6 of this device speaks QMI as per tests done by us. Credits go to Antonella for providing the hardware. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Antonella Pellizzari <anto.pellizzari83@gmail.com> Tested-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | USB: quirks: add touchscreen that is dazzeled by remote wakeupOliver Neukum2013-10-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device descriptors are messed up after remote wakeup Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | | Revert "usb: musb: gadget: fix otg active status flag"Greg Kroah-Hartman2013-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 9b0a1de3c85d99d881c86a29b3d52da7b9c7bd61. Aaro writes: With v3.12-rc4 I can no longer connect to N800 (OMAP2) with USB (peripheral, g_ether). According to git bisect this is caused by: 9b0a1de3c85d99d881c86a29b3d52da7b9c7bd61 is the first bad commit So revert this patch, as Felipe says: It's unfortunate that tusb6010 is so messed up Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 00:56:42 +0100