summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mfd: cs47l24: Fix defaults array based on testingCharles Keepax2016-03-161-9/+1
| | | | | | | | | My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: wm8998: Fix defaults array based on testingCharles Keepax2016-03-161-10/+2
| | | | | | | | | My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: wm5102: Fix defaults array based on testingCharles Keepax2016-03-161-12/+4
| | | | | | | | | My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: wm5110: Fix defaults array based on testingCharles Keepax2016-03-161-45/+37
| | | | | | | | | My automated test is back and now can check defaults against the actual hardware. This patch updates the defaults array for the differences detected and removes a couple of completely unused registers. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: arizona: Update small typo in Arizona SPI KconfigCharles Keepax2016-03-161-1/+1
| | | | | | | | The help text had a copy and paste error and refers to I2C in the SPI section. This patch corrects this typo. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: syscon: Make syscon_regmap_config constPhilipp Zabel2016-03-161-5/+5
| | | | | | | | syscon_regmap_config can be made const if syscon_probe() creates a local copy on the stack, just like syscon_register() does. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: syscon: Set regmap max_register in of_syscon_registerPhilipp Zabel2016-03-161-1/+8
| | | | | | | | | Determine the regmap max_register configuration from the io resource size and the reg-io-width device tree property. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: db8500: Avoid uninitialized variable referenceArnd Bergmann2016-03-161-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | The prcmu_config_clkout() function ensures that the 'clkout' argument can only be '0' or '1' using an appropriate BUG_ON(), so the compiler should know that the div_mask, mask, and bits variables are always initialized later on. However, it doesn't understand this in gcc-5.2 and produces a false positive warning instead: drivers/mfd/db8500-prcmu.c: In function 'prcmu_config_clkout': drivers/mfd/db8500-prcmu.c:762:10: error: 'div_mask' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (val & div_mask) { ^ drivers/mfd/db8500-prcmu.c:769:13: error: 'mask' may be used uninitialized in this function [-Werror=maybe-uninitialized] if ((val & mask & ~div_mask) != bits) { ^ drivers/mfd/db8500-prcmu.c:757:7: error: 'bits' may be used uninitialized in this function [-Werror=maybe-uninitialized] Replacing the switch() statement with an equivalent if() lets gcc figure this out reliably and avoids the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: tps65086: Add driver for the TPS65086 PMICAndrew F. Davis2016-03-164-0/+280
| | | | | | | | | | | | Add support for the TPS65912 device. It provides communication through I2C and contains the following components: - Regulators - Load switches - GPO controller Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* Documentation: tps65086: Add DT bindings for the TPS65086 PMICAndrew F. Davis2016-03-161-0/+55
| | | | | | | | | The TPS65086 PMIC contains several regulators and a GPO controller. Add bindings for the TPS65086 PMIC. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: lpss: Add PCI IDs for Intel Broxton B-Step platformHuiquan Zhong2016-03-091-1/+18
| | | | | | | | | | Add PCI IDs for Intel Broxton B-Step platform, which have same LPSS devices with A-Step. Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> cked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: Allow i2c modular drivers to build with I2C=mAxel Lin2016-03-091-7/+7
| | | | | | | | | These drivers can be built as module, so make them depend on I2C rather than I2C=y. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: intel-lpss: Remove clock tree on error pathAndy Shevchenko2016-03-091-0/+1
| | | | | | | | | | | We forgot to remove the clock tree if something goes wrong in ->probe(). Add a call to intel_lpss_unregister_clock() on error path in ->probe() to fix the potential issue. Fixes: 4b45efe85263 (mfd: Add support for Intel Sunrisepoint LPSS devices) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* mfd: tps65010: Fix init when the driver is built-inAaro Koskinen2016-03-091-20/+1
| | | | | | | | | | | | | | | | | | tps65010 driver's initcall cannot succeed when the driver is built-in, because it expects that the I2C probe is completed at initcall time; this cannot happen as MFD is initialized before I2C. Also on systems where the chip is not present there is unnecessary 30 ms delay during the boot. Instead of waiting for probe to finish, just register the I2C device. If some boards need retry mechanism for startup glitches, that should be done in the actual probe function. Also delete the driver banner message. The patch allows to use tps65010 again with OMAP1 (where it's required to be built-in) and enables e.g. USB and LED functionality on OMAP5912 OSK. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Lee Jones <lee.jones@linaro.org>
*---. Merge branches 'ib-mfd-clk-4.6', 'ib-mfd-input-iio-4.6', ↵Lee Jones2016-03-0930-1368/+2384
|\ \ \ | | | | | | | | | | | | 'ib-mfd-regulator-4.6' and 'ib-mfd-regulator-gpio-4.6' into ibs-for-mfd-merged
| | | * gpio: tps65912: Add GPIO driver for the TPS65912 PMICAndrew F. Davis2016-02-113-0/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the TPS65912 PMIC GPIOs. TPS65912 has five configurable GPIOs that can be used for several purposes. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | | * regulator: tps65912: Add regulator driver for the TPS65912 PMICAndrew F. Davis2016-02-113-0/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for TPS65912 PMIC regulators. The regulators set consists of 4 DCDCs and 10 LDOs. The output voltages are configurable and are meant to supply power to the main processor and other components. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | | * mfd: tps65912: Add driver for the TPS65912 PMICAndrew F. Davis2016-02-116-0/+636
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for TPS65912 PMIC MFD core. It provides communication through the I2C and SPI interfaces. It contains the following components: - Regulators - GPIO controller Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | | * mfd: tps65912: Remove old driver in preparation for new driverAndrew F. Davis2016-02-1113-1735/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old tps65912 driver is being replaced, delete old driver. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | | * Documentation: tps65912: Add DT bindings for the TPS65912 PMICAndrew F. Davis2016-02-111-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TPS65912 PMIC contains several regulators and a GPIO controller. Add bindings for the TPS65912 PMIC. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | regulator: axp20x: Support new AXP223 PMICChen-Yu Tsai2016-02-121-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs. It is functionally identical to AXP221; only the regulator default voltage/status and the external host interface are different. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | mfd: axp20x: Add support for RSB based AXP223 PMICChen-Yu Tsai2016-02-125-0/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs. It is functionally identical to AXP221; only the regulator default voltage/status and the external host interface are different. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | mfd: axp20x: Whitespace, open parenthesis alignment code style fixesChen-Yu Tsai2016-02-121-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes some leftover code style issues in the axp20x core. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | mfd: axp20x: Split the driver into core and i2c bitsChen-Yu Tsai2016-02-125-81/+161
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The axp20x driver assumes the device is i2c based. This is not the case with later chips, which use a proprietary 2 wire serial bus by Allwinner called "Reduced Serial Bus". This patch follows the example of mfd/wm831x and splits it into an interface independent core, and an i2c specific glue layer. MFD_AXP20X and the new MFD_AXP20X_I2C are changed to tristate symbols, allowing the driver to be built as modules. Whitespace and other style errors in the moved i2c specific code have been fixed. Included but unused header files are removed as well. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | mfd: axp20x: Add missing copyright noticeChen-Yu Tsai2016-02-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supply a backdated copyright notice. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Carlo Caione <carlo@caione.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | mfd: axp20x: Use dev->driver->of_match_table in axp20x_match_device()Chen-Yu Tsai2016-02-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In axp20x_match_device(), match the of_device_id table bound to the device driver instead of pointing to axp20x_of_match directly. This will allow us to keep axp20x_match_device() unmodified when we expand the axp20x driver into multiple ones covering different interface types. of_device_get_match_data() cannot be used here as we need to know if it failed to get a match, or if the match data value just happened to be 0, as it is for the AXP152. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | mfd: axp20x: Remove second struct device * parameter for axp20x_match_device()Chen-Yu Tsai2016-02-121-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The first argument passed to axp20x_match_device(), struct axp20x_dev *, already contains a pointer to the device. By rearranging some code, moving the assignment of the pointer before axp20x_match_device() is called, we can eliminate the second parameter. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| | * | mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindingsChen-Yu Tsai2016-02-121-3/+4
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs. It is functionally identical to AXP221; only the regulator default voltage/status and the external host interface are different. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | iio: adc/imx25-gcq: Move incorrect do_divArnd Bergmann2016-03-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The newly added driver uses do_div() to device a 32-bit number, which now provokes a warning: drivers/iio/adc/fsl-imx25-gcq.c: In function 'mx25_gcq_setup_cfgs': include/asm-generic/div64.h:207:28: warning: comparison of distinct pointer types lacks a cast (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ This replaces the do_div() call with a straight division operator. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 6df2e98c3ea5 ("iio: adc: Add imx25-gcq ADC driver") Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | Input: touchscreen: Add imx25 TCQ driverMarkus Pargmann2016-02-113-0/+606
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a driver for the imx25 ADC/TSC module. It controls the touchscreen conversion queue and creates a touchscreen input device. The driver currently only supports 4 wire touchscreens. The driver uses a simple conversion queue of precharge, touch detection, X measurement, Y measurement, precharge and another touch detection. This driver uses the regmap from the parent to setup some touch specific settings in the core driver and setup a idle configuration with touch detection. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Denis Carikli <denis@eukrea.com> [fix clock's period calculation] [fix calculation of the 'settling' value] Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | iio: adc: Add imx25-gcq ADC driverMarkus Pargmann2016-02-113-0/+425
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a conversion queue driver for the mx25 SoC. It uses the central ADC which is used by two seperate independent queues. This driver prepares different conversion configurations for each possible input. For a conversion it creates a conversionqueue of one item with the correct configuration for the chosen channel. It then executes the queue once and disables the conversion queue afterwards. The reference voltages are configurable through devicetree subnodes, depending on the connections of the ADC inputs. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | mfd: fsl-imx25-tsadc: Register touchscreen ADC driverMarkus Pargmann2016-02-114-0/+354
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the core driver for imx25 touchscreen/adc driver. The module has one shared ADC and two different conversion queues which use the ADC. The two queues are identical. Both can be used for general purpose ADC but one is meant to be used for touchscreens. This driver is the core which manages the central components and registers of the TSC/ADC unit. It manages the IRQs and forwards them to the correct components. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Denis Carikli <denis@eukrea.com> [ensure correct ADC clock depending on the IPG clock] Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | Input: add binding documentation for imx25 touchscreen controllerMarkus Pargmann2016-02-111-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is the touchscreen conversion queue binding documentation. It uses the shared imx25 ADC. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | iio: Add binding documentation for imx25 GCQMarkus Pargmann2016-02-112-0/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The documentation describes the bindings for the imx25 GCQ unit which is essentially a generic conversion queue using the imx25 ADC. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | mfd: Add DT binding documentation for imx25 ADC/TSCMarkus Pargmann2016-02-111-0/+47
| |/ | | | | | | | | | | | | | | | | | | This documentation describes the devicetree bindings for the ADC/Touchscreen unit of the i.MX25 SoC. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* / mfd: intel_quark_i2c_gpio: Use clkdev_create()Stephen Boyd2016-02-111-17/+9
|/ | | | | | | | | | | | | | | Convert this driver to use clkdev_create() instead of clk_register_clkdevs(). The latter API is only used by this driver, although this driver only allocates one clk to add anyway. Furthermore, this driver allocates the clk_lookup structure with devm, but clkdev_drop() will free that structure when passed, leading to a double free when this driver is removed. Clean it all up and pave the way for the removal of clk_register_clkdevs(). Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* Linux 4.5-rc2v4.5-rc2Linus Torvalds2016-02-011-1/+1
|
* Merge tag 'usb-4.5-rc2' of ↵Linus Torvalds2016-02-019-7/+68
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some small USB fixes and new device ids for 4.5-rc2. Nothing major here, full details are in the shortlog, and all of these have been in linux-next successfully" * tag 'usb-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: option: fix Cinterion AHxx enumeration USB: mxu11x0: fix memory leak on usb_serial private data USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable USB: serial: option: Adding support for Telit LE922 USB: serial: visor: fix crash on detecting device without write_urbs USB: visor: fix null-deref at probe USB: cp210x: add ID for IAI USB to RS485 adaptor usb: hub: do not clear BOS field during reset device cdc-acm:exclude Samsung phone 04e8:685d usb: cdc-acm: send zero packet for intel 7260 modem usb: cdc-acm: handle unlinked urb in acm read callback
| * Merge tag 'usb-serial-4.5-rc2' of ↵Greg Kroah-Hartman2016-01-286-3/+49
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.5-rc2 Here are two fixes of crashes in the visor driver that could be triggered using bad (malicious) descriptors, a fix for two memory leaks in the new mxu11x0 driver, and an interface-blacklist fix for the option driver. Included are also some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: option: fix Cinterion AHxx enumerationJohn Ernberg2016-01-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: John Ernberg <john.ernberg@actia.se> Fixes: 1941138e1c02 ("USB: added support for Cinterion's products...") Cc: stable <stable@vger.kernel.org> # v3.9: 8ff10bdb14a52 Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: mxu11x0: fix memory leak on usb_serial private dataMathieu OTHACEHE2016-01-251-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | On nominal execution, private data allocated on port_probe and attach are never freed. Add port_remove and release callbacks to free them respectively. Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: ftdi_sio: add support for Yaesu SCU-18 cableGreg Kroah-Hartman2016-01-252-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by: Harald Linden <harald.linden@7183.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: option: Adding support for Telit LE922Daniele Palmas2016-01-251-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for two PIDs of LE922. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: serial: visor: fix crash on detecting device without write_urbsVladis Dronov2016-01-251-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: visor: fix null-deref at probeJohan Hovold2016-01-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| | * USB: cp210x: add ID for IAI USB to RS485 adaptorPeter Dedecker2016-01-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by: Peter Dedecker <peter.dedecker@hotmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * | usb: hub: do not clear BOS field during reset deviceDu, Changbin2016-01-251-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In function usb_reset_and_verify_device, the old BOS descriptor may still be used before allocating a new one. (usb_unlocked_disable_lpm function uses it under the situation that it fails to disable lpm.) So we cannot set the udev->bos to NULL before that, just keep what it was. It will be overwrite when allocating a new one. Crash log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8171f98d>] usb_enable_link_state+0x2d/0x2f0 Call Trace: [<ffffffff8171ed5b>] ? usb_set_lpm_timeout+0x12b/0x140 [<ffffffff8171fcd1>] usb_enable_lpm+0x81/0xa0 [<ffffffff8171fdd8>] usb_disable_lpm+0xa8/0xc0 [<ffffffff8171fe1c>] usb_unlocked_disable_lpm+0x2c/0x50 [<ffffffff81723933>] usb_reset_and_verify_device+0xc3/0x710 [<ffffffff8172c4ed>] ? usb_sg_wait+0x13d/0x190 [<ffffffff81724743>] usb_reset_device+0x133/0x280 [<ffffffff8179ccd1>] usb_stor_port_reset+0x61/0x70 [<ffffffff8179cd68>] usb_stor_invoke_transport+0x88/0x520 Signed-off-by: Du, Changbin <changbin.du@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | cdc-acm:exclude Samsung phone 04e8:685dOliver Neukum2016-01-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: cdc-acm: send zero packet for intel 7260 modemLu Baolu2016-01-252-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Intel 7260 modem, it is needed for host side to send zero packet if the BULK OUT size is equal to USB endpoint max packet length. Otherwise, modem side may still wait for more data and cannot give response to host side. Signed-off-by: Konrad Leszczynski <konrad.leszczynski@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: cdc-acm: handle unlinked urb in acm read callbackLu Baolu2016-01-251-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current acm driver, the bulk-in callback function ignores the URBs unlinked in usb core. This causes unexpected data loss in some cases. For example, runtime suspend entry will unlinked all urbs and set urb->status to -ENOENT even those urbs might have data not processed yet. Hence, data loss occurs. This patch lets bulk-in callback function handle unlinked urbs to avoid data loss. Signed-off-by: Tang Jian Qiang <jianqiang.tang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-23 05:44:18 +0100