summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: Disallow to set multicast BSSIDAlina Friedrichsen2009-01-291-2/+7
| | | | | | | | | | | | | | | Okay, here is the first of the five patches. After applying all of them you should be able to build/join huge city mesh networks (e.g. with the OLSR protocol) with the most of the mac80211 wireless drivers by setting a fixed BSSID in the ad hoc mode. (If you found no other bug/problem.) This was not specified in the original standard, but is a widely used de facto standard. The first patch now completely disallow to set multicast MAC addresses as BSSID. The behavior before was really strange. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Replace RFKILL with INPUTIvo van Doorn2009-01-294-90/+46
| | | | | | | | | | | | As discussed on linux-wireless rt2x00 does not offer a true RFKILL key, for that reason RFKILL support should be entirely removed. The key which is attached to the hardware should be treated as normal input device instead. Implement input_poll_dev support to poll the device frequently. When the key status has changed report it as a SW event. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Enable Bluetooth Coexistence supportVasanthakumar Thiagarajan2009-01-294-2/+55
| | | | | Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: fix off-by-one in gpio checksBob Copeland2009-01-291-5/+5
| | | | | | | | | | | Sanity checks against AR5K_NUM_GPIO were all broken. This doesn't currently cause any problems since we only use the first four gpios. Changes-licensed-under: ISC Reported-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: support LEDs on Acer Aspire One netbookBob Copeland2009-01-292-0/+9
| | | | | | | | | | | | | | Add vendor ID for Foxconn and use it to set the ath5k LED gpio and polarity for Acer branded laptops. base.c: Changes-licensed-under: 3-Clause-BSD Reported-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54: power save managementChristian Lamparter2009-01-292-0/+43
| | | | | | | This patch implements dynamic power save feature for p54. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54: implement FIF_OTHER_BSS filter settingChristian Lamparter2009-01-291-2/+4
| | | | | | | | According to STMicroelectronics' LMAC documentation, the P54_FILTER_TYPE_TRANSPARENT flag "configures the receive frame filter to pass all frames without regard to type and address matching." Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54: enable rx/tx antenna diversity by eeprom bitsChristian Lamparter2009-01-293-4/+10
| | | | | | | Respect all documented bits in the eeprom about the device diversity features. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: use signed format to print HAL statusGabor Juhos2009-01-291-1/+1
| | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up set_key callbackJohannes Berg2009-01-2911-83/+89
| | | | | | | | | | | | | | The set_key callback now seems rather odd, passing a MAC address instead of a station struct, and a local address instead of a vif struct. Change that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Bob Copeland <me@bobcopeland.com> [ath5k] Acked-by: Ivo van Doorn <ivdoorn@gmail.com> [rt2x00] Acked-by: Christian Lamparter <chunkeey@web.de> [p54] Tested-by: Kalle Valo <kalle.valo@nokia.com> [iwl3945] Tested-by: Samuel Ortiz <samuel@sortiz.org> [iwl3945] Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make wake/stop_queue_by_reason() functions staticKalle Valo2009-01-291-4/+4
| | | | | | | | | | | | | | Fixes sparse warnings: net/mac80211/util.c:355:6: warning: symbol 'ieee80211_wake_queue_by_reason' was not declared. Should it be static? net/mac80211/util.c:385:6: warning: symbol 'ieee80211_stop_queue_by_reason' was not declared. Should it be static? Thanks to Johannes Berg for reporting this. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Change schedule for old-fw support removalMichael Buesch2009-01-292-4/+10
| | | | | | | | | The scheduled date for the removal of old fw support was in July 2008. However, we're not going to remove the support unless it causes a major headache. So change the schedule from "July 2008" to "when it causes headaches". Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54: regulatory domain hintsChristian Lamparter2009-01-292-1/+39
| | | | | | | | | | | This patch adds a sub-routine that parses the default country eeprom entry and forwards the obtained Alpha2 identifier to the regulatory sub-system. Note: I dropped the p54 specific regdomain<->alpha2 conversion code for now. But it will be added as soon as there's the common library function is ready. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54: prevent upload of wrong firmwaresChristian Lamparter2009-01-292-0/+21
| | | | | | | | | | | This patch will prevent anyone to upload a firmware which was not designed for his device. There's still a catch: There is no easy way to detect if a firmware is for PCI or for USB (1st Gen), because they all share the same LM86 identifier. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* p54usb: utilize usb_reset_device for 3887Christian Lamparter2009-01-292-13/+58
| | | | | | | | | | | | | | | | Sometimes on unload or reboot the 3887 USB devices become stuck. <usual log entry> kernel: usbcore: registered new interface driver p54usb kernel: usb 2-10: (p54usb) reset failed! (-110) kernel: p54usb: probe of 2-10:1.0 failed with error -110 [...] and a physical unplug and replug was necessary. However we should be able to do this in software as well, without any user interaction. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43/ssb: Add SPROM8 extraction and LP-PHY detectionMichael Buesch2009-01-294-12/+111
| | | | | | | | | This adds detection code for the LP-PHY and SPROM extraction code for version 8, which is needed by the LP-PHY and newer N-PHY. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: detect N PHY revision/radioJohannes Berg2009-01-291-2/+2
| | | | | | | Does nothing unless you enable the hidden N PHY config. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: INI update for Atheros AR9280 and AR9285 chipset.Senthil Balasubramanian2009-01-295-302/+337
| | | | | Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ssb/b43: add new N PHY deviceJohannes Berg2009-01-292-0/+2
| | | | | | | | This is used on my macbook. N PHY, obviously nothing works yet, but we can detect the chip with this patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: Fix tx power settingVasanthakumar Thiagarajan2009-01-293-5/+6
| | | | | | | | | | | | | power_level in ieee80211_conf is being used for more than one purpose. It being used as user configured power limit and the final power limit given to the driver. By doing so, except very first time, the tx power limit is taken from min(chan->max_power, local->hw.conf.power_level) which is not what we want. This patch defines a new memeber in ieee80211_conf which is meant only for user configured power limit. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix sparse warningsLuis R. Rodriguez2009-01-292-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix sparse warnings: drivers/net/wireless/ath9k/hw.c:1850:17: warning: symbol 'tmp' shadows an earlier one drivers/net/wireless/ath9k/hw.c:1713:6: originally declared here drivers/net/wireless/ath9k/hw.c:2051:17: warning: symbol 'tmp' shadows an earlier one drivers/net/wireless/ath9k/hw.c:1961:6: originally declared here drivers/net/wireless/ath9k/eeprom.c:195:6: warning: symbol 'ath9k_fill_eeprom' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:463:5: warning: symbol 'ath9k_check_eeprom' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1219:6: warning: symbol 'ath9k_hw_set_def_power_per_rate_table' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:1510:6: warning: symbol 'ath9k_hw_set_4k_power_per_rate_table' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2007:5: warning: symbol 'ath9k_set_txpower' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2106:6: warning: symbol 'ath9k_set_addac' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2543:6: warning: symbol 'ath9k_eeprom_set_board_values' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2606:5: warning: symbol 'ath9k_get_eeprom_antenna_cfg' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2622:4: warning: symbol 'ath9k_hw_get_4k_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2628:4: warning: symbol 'ath9k_hw_get_def_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2647:4: warning: symbol 'ath9k_get_num_ant_config' was not declared. Should it be static? drivers/net/wireless/ath9k/eeprom.c:2790:5: warning: symbol 'ath9k_get_eeprom' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:962:30: warning: symbol 'iq_cal_multi_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:969:30: warning: symbol 'iq_cal_single_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:976:30: warning: symbol 'adc_gain_cal_multi_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:983:30: warning: symbol 'adc_gain_cal_single_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:990:30: warning: symbol 'adc_dc_cal_multi_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:997:30: warning: symbol 'adc_dc_cal_single_sample' was not declared. Should it be static? drivers/net/wireless/ath9k/calib.c:1004:30: warning: symbol 'adc_init_dc_cal' was not declared. Should it be static? Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: remove superfluous check on changing channelLuis R. Rodriguez2009-01-291-46/+41
| | | | | | | | | | | | | | | | When we try to change the channel in ath9k its because either the configuration indicates we *have* changed channels or HT configuration has changed. In both cases we want to do a reset. Either way mac80211 will inform us when we want to actually change the channel so trust those calls. Although in the patch it may seem as I am doing more code changes I am not, all I am doing is removing the initial branch conditional and shifting the code to the left. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: remove ath9k_hw_check_chan()Luis R. Rodriguez2009-01-291-25/+1
| | | | | | | | The only check we care about in ath9k_hw_check_chan() is the internal regulatory check so use that. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: remove ath9k_hw_chan2wmode()Luis R. Rodriguez2009-01-291-27/+19
| | | | | | | | | | | | | | | | The only left users are for timing for ACK timeout, slotime and CTS timeout. We currently use an array CLOCK_RATE to keep these values per mode and since as only will use A and G we can depend on the band to get the appropriate values. We note that we should be using a different clock rate value for CCK, we can do this in separate patch, currently this is being disregarded and should only affect when we want to change the default ACK/CTS timeout or slot time and stuck with using using 802.11b. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: remove mode specific default noise floor valuesLuis R. Rodriguez2009-01-291-6/+3
| | | | | | | | | | | | | | | The NOISE_FLOOR array we have is mode specific, and the only possible indexed values are A, B and G. The mode routine only can return G or A, so this is band specific. Then since the values for A and G (5ghz or 2ghz) are the same (-96) we simply remove the array and use a static value. If we later determine we want to use special values for HT configurations we can use the new mac80211 conf_is_ht*() helpers. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Make ANI CCK and OFDM error triggers band specificLuis R. Rodriguez2009-01-291-8/+4
| | | | | | | | | The CCK and OFDM ANI error triggers are not mode specific but rather band specific so just make use of the already available band from ieee80211_conf. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: no need for ht.enabledLuis R. Rodriguez2009-01-294-14/+1
| | | | | | | | We can simply use conf_is_ht() check where needed. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: make use of conf_is_ht*() helpersLuis R. Rodriguez2009-01-292-6/+6
| | | | | | Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: make use of conf_is_ht*() in the rest of the driverLuis R. Rodriguez2009-01-293-7/+6
| | | | | | | | Use shiny new conf_is_ht*() helpers, we can later remove ht.enabled if desired. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: use ieee80211_conf on ath9k_hw_iscal_supported()Luis R. Rodriguez2009-01-293-42/+27
| | | | | | | | | | | ath9k_hw_iscal_supported() just needs to be aware of your band and if HT20 is being used so lets abandon our internal channel, HT appended values and internal mode values and use ieee80211_conf which already carries this information. This works as calibration is being done for the currently configured channel. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: make request to get the noisefloor threshold band specificLuis R. Rodriguez2009-01-293-14/+10
| | | | | | | | | | | | | Lets make the request to get the current noise floor threshold from the EEPROM band specific as it is band specific, not mode specific. This also adds a backpointer on the private channel structure back to the ieee80211_channel structure as this is now needed during ath9k_hw_getnf(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: consolidate arguments on hw resetLuis R. Rodriguez2009-01-294-127/+74
| | | | | | | | | | | | HW reset calls pass the same variables or structs which we can obtain easily from ah. Although this also applies during channel changes as we will keep around the ath9k_channel passed as an argument for now. We now also now propagate the hw reset errors down. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Rename ath_setcurmode() to ath_cache_conf_rate()Luis R. Rodriguez2009-01-291-4/+6
| | | | | | | | | ath_setcurmode() is a bit misleading, all we are doing is caching the rate for the corresponding configuration we are using. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: remove cache of rate preference when using 11g protectionLuis R. Rodriguez2009-01-293-14/+13
| | | | | | | | | No need to cache when we want to use 2Mbit/s for all protection frames for 802.11g as we can determine that dynamically on ath_buf_set_rate() itself. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: use hw->conf on ath_setcurmode()Luis R. Rodriguez2009-01-291-32/+40
| | | | | | | | | | | | We don't need to use our own mode for setting the the routine tries to do, in fact lets remove ath_chan2mode() now as we can simply use the currently set band and the HT configuration provided by mac80211 through the ieee80211_conf. This works on changing channels as well as the internal ath9k_channel we use is based on the ieee80211_channel in the config. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: add HT conf helpersLuis R. Rodriguez2009-01-291-0/+30
| | | | | | | | | | In HT capable drivers you often need to check if you are currently using HT20 or HT40. This adds a few small helpers to let drivers figure that out. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: use rx queue management infrastructure from iwlcoreWinkler, Tomas2009-01-293-85/+3
| | | | | | | | | This patch uses rx queue alloc free and reset function from iwlcore. This should fix the regression reported by Kalle Valo. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: use iwl3945_tx_cmd instead of iwl_tx_cmdWinkler, Tomas2009-01-292-33/+35
| | | | | | | | | | The patch replaces iwl_tx_cmd with iwl3945_tx_cmd to complete transitions introduced by "iwlwifi: use iwl_cmd instead of iwl3945_cmd" Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: switch to the iwl-core send_card_state routineSamuel Ortiz2009-01-293-34/+6
| | | | | | | | | Switch iwl3945 to use iwl-core:send_card_state routine. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: sync tx queue data structure with iwlagnSamuel Ortiz2009-01-297-90/+103
| | | | | | | | | | | We are now using the iwl_tx_queue for iwl3945. To reach that goal, we included the 3945 specific tfd frame structure to iwl_tx_queue. This has no effect on the current iwlagn code. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: adding utils opsKolekar, Abhijeet2009-01-291-0/+18
| | | | | | | | | The patch implements iwl_hcmd_utils_ops for 3945. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: rearrange 3945 tfdWinkler, Tomas2009-01-296-57/+46
| | | | | | | | | | | This patch moves 3945 TFD structures to iwl-3945-fh.h. It renames them similarly to AGN naming. This patch also eliminates iwl3945_tx_info and fixes endianity issue in iwl3945_tx_skb and iwl3945_enqueue_hcmd caused by ugly casting. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: use iwl_rb_statusWinkler, Tomas2009-01-296-14/+4
| | | | | | | | | | This patch makes use of iwl_rb_status also in 3945. The structure for 3945 is not the same but since only closed_rb_num filed is used in both cases there is no reason to duplicate it. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: use iwl_get_hw_modeKolekar, Abhijeet2009-01-291-8/+2
| | | | | | | | Use iwl_get_hw_mode for 3945. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: release resources before shutting downKolekar, Abhijeet2009-01-291-4/+6
| | | | | | | | Release resource before shutting down and notify upper stack. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: simplify iwl3945_pci_probeKolekar, Abhijeet2009-01-291-67/+79
| | | | | | | | The patch simplifies iwl3945_pci_probe. It also uses apm_ops for apm init. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: add set_pwr_srcKolekar, Abhijeet2009-01-291-3/+7
| | | | | | | | The patch adds 3945 iwl_lib_ops->set_pwr_src to the driver Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: add apm opsKolekar, Abhijeet2009-01-292-53/+88
| | | | | | | | The patch adds 3945 iwl_lib_ops->apm_ops to the driver. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: add load ucode opKolekar, Abhijeet2009-01-292-151/+160
| | | | | | | | The patch adds 3945 iwl_lib_ops->load_ucode to the driver. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwl3945: cleanup and remove duplicate codeKolekar, Abhijeet2009-01-291-170/+34
| | | | | | | | | | | | | | | The patch removes the following duplicate structures: iwl3945_is_alive iwl3945_is_ready iwl3945_is_init iwl3945_is_rfkill_sw iwl3945_is_rfkill iwl3945_reset_qos Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 19:31:19 +0100