summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* media: add tuner standby op, use where neededHans Verkuil2018-03-2113-66/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The v4l2_subdev core s_power op was used for two different things: power on/off sensors or video decoders/encoders and to put a tuner in standby (and only the tuner!). There is no 'tuner wakeup' op, that's done automatically when the tuner is accessed. The danger with calling (s_power, 0) to put a tuner into standby is that it is usually broadcast for all subdevs. So a video receiver subdev that supports s_power will also be powered off, and since there is no corresponding (s_power, 1) they will never be powered on again. In addition, this is specifically meant for tuners only since they draw the most current. This patch adds a new tuner op called 'standby' and replaces all calls to (core, s_power, 0) by (tuner, standby). This prevents confusion between the two uses of s_power. Note that there is no overlap: bridge drivers either just want to put the tuner into standby, or they deal with powering on/off sensors. Never both. This also makes it easier to replace s_power for the remaining bridge drivers with some PM code later. Whether we want something cleaner for tuners in the future is a separate topic. There is a lot of legacy code surrounding tuners, and I am very hesitant about making changes there. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: vb2-core: vb2_ops: document non-interrupt-context callingLuca Ceresoli2018-03-211-0/+3
| | | | | | | | | | | | | | | Driver writers can benefit in knowing if/when callbacks are called in interrupt context. But it is not completely obvious here, so document it. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: vb2-core: document the REQUEUEING stateLuca Ceresoli2018-03-211-9/+15
| | | | | | | | | | | | | | | VB2_BUF_STATE_REQUEUEING is accepted by vb2_buffer_done() but not documented, so add it along with notes about calls in interrupt context. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: vb2-core: vb2_buffer_done: consolidate docsLuca Ceresoli2018-03-211-6/+4
| | | | | | | | | | | | | | Documentation about what start_streaming() should do on failure are scattered in two places and mostly duplicated, so consolidate them in one of the two places. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: radio: Critical interrupt bugfix for si470x over i2cDouglas Fischer2018-03-212-2/+8
| | | | | | | | | | | Fixed si470x_start() disabling the interrupt signal, causing tune operations to never complete. This does not affect USB radios because they poll the registers instead of using the IRQ line. Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com> [hans.verkuil@cisco.com: fixed 80 column checkpatch warning] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: radio: Critical v4l2 registration bugfix for si470x over i2cDouglas Fischer2018-03-211-4/+28
| | | | | | | | | | Added the call to v4l2_device_register() required to add a new radio device. Without this patch, it is impossible for the driver to load. This does not affect USB devices. Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: radio: Tuning bugfix for si470x over i2cDouglas Fischer2018-03-211-0/+9
| | | | | | | | | | | | Fixed si470x_set_channel() trying to tune before chip is turned on, which causes warnings in dmesg and when probing, makes driver wait for 3s for tuning timeout. This issue did not affect USB devices because they have a different probing sequence. Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com> [hans.verkuil@cisco.com: fixed space-after-( checkpatch warning] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: stm32-dcmi: add JPEG supportHugues Fruchet2018-03-211-47/+146
| | | | | | | | Add DCMI JPEG support. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: stm32-dcmi: fix unnecessary parenthesesHugues Fruchet2018-03-211-6/+6
| | | | | | | | | Fix unnecessary parentheses in if conditions. Detected by checkpatch.pl --strict. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: stm32-dcmi: rework overrun/error caseHugues Fruchet2018-03-211-18/+11
| | | | | | | | | | | | | | | | Do not stop/restart dma on overrun or errors. Dma will be restarted on current frame transfer completion. Frame transfer completion is ensured even if overrun or error occurs by DCMI continuous capture mode which restarts data transfer at next frame sync. Do no warn on overrun while in irq thread, this slows down system and lead to more overrun errors. Use a counter instead and log errors at stop streaming. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: stm32-dcmi: fix lock schemeHugues Fruchet2018-03-211-33/+24
| | | | | | | | Fix lock scheme leading to spurious freeze. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: v4l: common: Remove v4l2_find_nearest_formatSakari Ailus2018-03-212-43/+0
| | | | | | | | | v4l2_find_nearest_format is not useful for drivers in finding the best matching format as it assumes a V4L2 specific struct. Drivers will use v4l2_find_nearest_size instead. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: vivid: Use v4l2_find_nearest_sizeSakari Ailus2018-03-211-3/+2
| | | | | | | | Use v4l2_find_nearest_size instead of a driver specific function to find nearest matching size. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: ov5670: Use v4l2_find_nearest_sizeSakari Ailus2018-03-211-31/+2
| | | | | | | | Use v4l2_find_nearest_size instead of a driver specific function to find nearest matching size. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: ov13858: Use v4l2_find_nearest_sizeSakari Ailus2018-03-211-34/+2
| | | | | | | | Use v4l2_find_nearest_size instead of a driver specific function to find nearest matching size. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: v4l: common: Add a function to obtain best size from a listSakari Ailus2018-03-212-0/+64
| | | | | | | | | | | | | | Add a function (as well as a helper macro) to obtain the best size in a list of device specific sizes. This helps writing drivers as well as aligns interface behaviour across drivers. The struct in which this information is contained in is typically specific to the driver, therefore the existing function v4l2_find_nearest_format() does not address the need. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: imon: rename protocol from other to imonSean Young2018-03-211-14/+23
| | | | | | | | | | This renames the protocol for the imon rc driver from other to imon, since it is now an known protocol. Although different name will show up in the sysfs protocol file, loading a keymap using existing ir-keytable versions still works. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: add new imon protocol decoder and encoderSean Young2018-03-218-5/+220
| | | | | | | | This makes it possible to use the various iMON remotes with any raw IR RC device. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: oops in ir_timer_keyup after device unplugSean Young2018-03-211-3/+3
| | | | | | | | | | | If there is IR in the raw kfifo when ir_raw_event_unregister() is called, then kthread_stop() causes ir_raw_event_thread to be scheduled, decode some scancodes and re-arm timer_keyup. The timer_keyup then fires when the rc device is long gone. Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: new driver for early iMon deviceSean Young2018-03-214-0/+219
| | | | | | | | | These devices were supported by the lirc_imon.c driver which was removed from staging in commit f41003a23a02 ("[media] staging: lirc_imon: port remaining usb ids to imon and remove"). Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: add keymap for iMON RSC remoteSean Young2018-03-213-0/+83
| | | | | | | Note that the stick on the remote is not supported yet. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: Revert "[media] staging: lirc_imon: port remaining usb ids to imon ↵Sean Young2018-03-211-128/+7
| | | | | | | | | | | | | and remove" This code was ported without the necessary hardware to test. There are multiple problems which are more easily solved by writing a separate driver. This reverts commit f41003a23a02dc7299539300f74360c2a932714a. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dt: bindings: Update binding documentation for sunxi IR controllerPhilipp Rossak2018-03-211-0/+3
| | | | | | | | | | | | This patch updates documentation for Device-Tree bindings for sunxi IR controller and adds the new optional property for the base clock frequency. Signed-off-by: Philipp Rossak <embed3d@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: rc: update sunxi-ir driver to get base clock frequency from devicetreePhilipp Rossak2018-03-211-8/+11
| | | | | | | | | | | | | | | This patch updates the sunxi-ir driver to set the base clock frequency from devicetree. This is necessary since there are different ir receivers on the market, that operate with different frequencies. So this value could be set if the attached ir receiver needs a different base clock frequency, than the default 8 MHz. Signed-off-by: Philipp Rossak <embed3d@gmail.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: em28xx-cards: fix em28xx_duplicate_dev()Dan Carpenter2018-03-081-1/+1
| | | | | | | | | There is a double sizeof() typo here so we don't duplicate the struct properly. Fixes: be7fd3c3a8c5 ("media: em28xx: Hauppauge DualHD second tuner functionality") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
* media: ngene: use common DVB I2C client handling helpersDaniel Scheller2018-03-082-53/+15
| | | | | | | | | | | | | Like in ddbridge, get rid of all duplicated I2C client handling constructs and rather make use of the newly added dvb_module_*() helpers. Makes things more clean and removes the (cosmetic) need for some variables. The check on a valid ptr on ci->en isn't really needed since the cxd2099 driver will set it at a time where it is going to return successfully from probing. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: ddbridge: use common DVB I2C client handling helpersDaniel Scheller2018-03-082-55/+14
| | | | | | | | | | | | | | | Instead of keeping duplicated I2C client handling construct, make use of the newly introduced dvb_module_*() helpers. This not only keeps things way cleaner and removes the need for duplicated I2C client attach code, but even allows to get rid of some variables that won't help in making things look cleaner anymore. The check on a valid ptr on port->en isn't really needed since the cxd2099 driver will set it at a time where it is going to return successfully from probing. Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb-frontends/Kconfig: move the SP2 driver to the CI sectionDaniel Scheller2018-03-081-7/+7
| | | | | | | | | | | The CIMaX SP2 driver is a EN50221 CI controller I2C driver similar to the cxd2099 driver. Move it's Kconfig block into the newly introduced CI subsection. Cc: Olli Salonen <olli.salonen@iki.fi> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: dvb-frontends/cxd2099: Kconfig additionsDaniel Scheller2018-03-081-1/+3
| | | | | | | | | | | The cxd2099 driver makes use of the Regmap I2C kernel API, thus add "select REGMAP_I2C" to it's Kconfig block. Also, make it default "m" if !MEDIA_SUBDRV_AUTOSELECT, just like every other dvb-frontend driver. And, while at it, remove the hyphens around the help tag. Cc: Jasmin Jessich <jasmin@anw.at> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: Kconfig: fix DVB dependenciesMauro Carvalho Chehab2018-03-081-0/+1
| | | | | | | | | | | | If I2C is present and it is module, the DVB core should also be a module, otherwise build will now fail with: drivers/media/dvb-core/dvbdev.o: In function `dvb_module_probe': drivers/media/dvb-core/dvbdev.c:965: undefined reference to `i2c_new_device' drivers/media/dvb-core/dvbdev.c:972: undefined reference to `i2c_unregister_device' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: si2168: fix a comment about firmware versionMauro Carvalho Chehab2018-03-081-1/+1
| | | | | | | | | | There's a comment there at s82168 that it is wrong. With firmware 4.0.11, sleep/resume works well without need of download it every time. But firmware 4.0.19 needs to be downloaded again after sleep. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: v4l2-subdev: document remaining undocumented functionsMauro Carvalho Chehab2018-03-081-5/+64
| | | | | | | | There are several undocumented v4l2-subdev functions that are part of kAPI. Document them. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: v4l2-subdev: get rid of __V4L2_SUBDEV_MK_GET_TRY() macroMauro Carvalho Chehab2018-03-081-12/+28
| | | | | | | | | | | | | | | | X-Virus-Scanned: Debian amavisd-new at dev.s-opensource.com media: v4l2-subdev: get rid of __V4L2_SUBDEV_MK_GET_TRY() macro The __V4L2_SUBDEV_MK_GET_TRY() macro is used to define 3 functions that have the same arguments. The code of those functions is simple enough to just declare them, de-obfuscating the code. While here, replace BUG_ON() by WARN_ON() as there's no reason why to panic the Kernel if this fails. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: s5c73m3-core: fix logic on a timeout conditionMauro Carvalho Chehab2018-03-071-3/+3
| | | | | | | | | | | | | | | As warned by smatch: drivers/media/i2c/s5c73m3/s5c73m3-core.c:268 s5c73m3_check_status() error: uninitialized symbol 'status'. if s5c73m3_check_status() is called too late, time_is_after_jiffies(end) will return 0, causing the while to abort before reading status. The current code will do the wrong thing here, as it will still check if status != value. The right fix here is to change the logic to ensure that it will always read the status. Suggested-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: remove unused varsMauro Carvalho Chehab2018-03-071-7/+0
| | | | | | | | | | | | | | | | | drivers/media/dvb-frontends/cxd2880/cxd2880_top.c: In function ‘cxd2880_set_ber_per_period_t’: drivers/media/dvb-frontends/cxd2880/cxd2880_top.c:677:34: warning: variable ‘c’ set but not used [-Wunused-but-set-variable] struct dtv_frontend_properties *c; ^ drivers/media/dvb-frontends/cxd2880/cxd2880_top.c: In function ‘cxd2880_set_ber_per_period_t2’: drivers/media/dvb-frontends/cxd2880/cxd2880_top.c:790:34: warning: variable ‘c’ set but not used [-Wunused-but-set-variable] struct dtv_frontend_properties *c; ^ drivers/media/dvb-frontends/cxd2880/cxd2880_top.c: In function ‘cxd2880_get_frontend’: drivers/media/dvb-frontends/cxd2880/cxd2880_top.c:1799:23: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] struct cxd2880_priv *priv = NULL; ^~~~ Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: don't return unitialized valuesMauro Carvalho Chehab2018-03-072-3/+3
| | | | | | | | drivers/media/dvb-frontends/cxd2880/cxd2880_devio_spi.c:59 cxd2880_io_spi_read_reg() error: uninitialized symbol 'ret'. drivers/media/dvb-frontends/cxd2880/cxd2880_devio_spi.c:111 cxd2880_io_spi_write_reg() error: uninitialized symbol 'ret'. drivers/media/dvb-frontends/cxd2880/cxd2880_tnrdmd.c:2985 cxd2880_tnrdmd_set_cfg() error: uninitialized symbol 'ret'. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Makefile: remove an includeMauro Carvalho Chehab2018-03-071-1/+0
| | | | | | | | It is not needed anymore to include the dvb-core directory, as all the public headers that used to be there was moved to include/media. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Add all Makefile, Kconfig files and Update MAINTAINERS file ↵Yasunari Takiguchi2018-03-077-0/+58
| | | | | | | | | | | | | | | | for the driver This is the Makefile, Kconfig files of driver and MAINTAINERS file update about the driver for the Sony CXD2880 DVB-T2/T tuner + demodulator. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Fix location of DVB headersMauro Carvalho Chehab2018-03-077-10/+10
| | | | | | | Fix a trivial conflict, where the location of DVB headers got moved. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Add DVB-T2 monitor functionsYasunari Takiguchi2018-03-072-0/+2013
| | | | | | | | | | | | | Provide monitor functions (DVB-T2) for the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Add DVB-T2 control functions for the driverYasunari Takiguchi2018-03-073-0/+1667
| | | | | | | | | | | | | Provide definitions, interfaces and functions needed for DVB-T2 of the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Add DVB-T monitor functionsYasunari Takiguchi2018-03-072-0/+852
| | | | | | | | | | | | | Provide monitor functions (DVB-T) for the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Add DVB-T control functions the driverYasunari Takiguchi2018-03-073-0/+1038
| | | | | | | | | | | | | Provide definitions, interfaces and functions needed for DVB-T of the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Add top level of the driverYasunari Takiguchi2018-03-071-0/+1954
| | | | | | | | | | | | | This provides the main dvb frontend operation functions for the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Add integration layer for the driverYasunari Takiguchi2018-03-072-0/+99
| | | | | | | | | | | | | These functions monitor the driver and watch for task completion. This is part of the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Add tuner part of the driverYasunari Takiguchi2018-03-076-0/+4104
| | | | | | | | | | | | | | | This part of the driver has the main routines to handle the tuner and demodulator functionality. The tnrdmd_mon.* files have monitor functions for the driver. This is part of the Sony CXD2880 DVB-T2/T tuner + demodulator driver. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Add spi device IO routinesYasunari Takiguchi2018-03-075-0/+325
| | | | | | | | | | | | | Add functions for initializing, reading and writing to the SPI device for the Sony CXD2880 DVB-T2/T tuner + demodulator. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880: Add common files for the driverYasunari Takiguchi2018-03-075-0/+189
| | | | | | | | | | | | | | These are common files for the driver for the Sony CXD2880 DVB-T2/T tuner + demodulator. These contains helper functions for the driver. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: cxd2880-spi: Add support for CXD2880 SPI interfaceYasunari Takiguchi2018-03-071-0/+670
| | | | | | | | | | | | | This is the SPI adapter part of the driver for the Sony CXD2880 DVB-T2/T tuner + demodulator. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* media: Add document file for CXD2880 SPI I/FYasunari Takiguchi2018-03-071-0/+14
| | | | | | | | | | | | | | This is the document file for Sony CXD2880 DVB-T2/T tuner + demodulator. It contains the description of the SPI adapter binding. Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com> Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com> Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com> Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com> Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com> Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 18:51:40 +0100