summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ALSA: caiaq: Fix stray URB at probe error pathTakashi Iwai2017-10-111-3/+9
| | | | | | | | | | | caiaq driver doesn't kill the URB properly at its error path during the probe, which may lead to a use-after-free error later. This patch addresses it. Reported-by: Johan Hovold <johan@kernel.org> Reviewed-by: Johan Hovold <johan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: seq: Fix use-after-free at creating a portTakashi Iwai2017-10-112-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a potential race window opened at creating and deleting a port via ioctl, as spotted by fuzzing. snd_seq_create_port() creates a port object and returns its pointer, but it doesn't take the refcount, thus it can be deleted immediately by another thread. Meanwhile, snd_seq_ioctl_create_port() still calls the function snd_seq_system_client_ev_port_start() with the created port object that is being deleted, and this triggers use-after-free like: BUG: KASAN: use-after-free in snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] at addr ffff8801f2241cb1 ============================================================================= BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in snd_seq_create_port+0x94/0x9b0 [snd_seq] age=1 cpu=3 pid=4511 ___slab_alloc+0x425/0x460 __slab_alloc+0x20/0x40 kmem_cache_alloc_trace+0x150/0x190 snd_seq_create_port+0x94/0x9b0 [snd_seq] snd_seq_ioctl_create_port+0xd1/0x630 [snd_seq] snd_seq_do_ioctl+0x11c/0x190 [snd_seq] snd_seq_ioctl+0x40/0x80 [snd_seq] do_vfs_ioctl+0x54b/0xda0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x16/0x75 INFO: Freed in port_delete+0x136/0x1a0 [snd_seq] age=1 cpu=2 pid=4717 __slab_free+0x204/0x310 kfree+0x15f/0x180 port_delete+0x136/0x1a0 [snd_seq] snd_seq_delete_port+0x235/0x350 [snd_seq] snd_seq_ioctl_delete_port+0xc8/0x180 [snd_seq] snd_seq_do_ioctl+0x11c/0x190 [snd_seq] snd_seq_ioctl+0x40/0x80 [snd_seq] do_vfs_ioctl+0x54b/0xda0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x16/0x75 Call Trace: [<ffffffff81b03781>] dump_stack+0x63/0x82 [<ffffffff81531b3b>] print_trailer+0xfb/0x160 [<ffffffff81536db4>] object_err+0x34/0x40 [<ffffffff815392d3>] kasan_report.part.2+0x223/0x520 [<ffffffffa07aadf4>] ? snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] [<ffffffff815395fe>] __asan_report_load1_noabort+0x2e/0x30 [<ffffffffa07aadf4>] snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] [<ffffffffa07aa8f0>] ? snd_seq_ioctl_delete_port+0x180/0x180 [snd_seq] [<ffffffff8136be50>] ? taskstats_exit+0xbc0/0xbc0 [<ffffffffa07abc5c>] snd_seq_do_ioctl+0x11c/0x190 [snd_seq] [<ffffffffa07abd10>] snd_seq_ioctl+0x40/0x80 [snd_seq] [<ffffffff8136d433>] ? acct_account_cputime+0x63/0x80 [<ffffffff815b515b>] do_vfs_ioctl+0x54b/0xda0 ..... We may fix this in a few different ways, and in this patch, it's fixed simply by taking the refcount properly at snd_seq_create_port() and letting the caller unref the object after use. Also, there is another potential use-after-free by sprintf() call in snd_seq_create_port(), and this is moved inside the lock. This fix covers CVE-2017-15265. Reported-and-tested-by: Michael23 Yu <ycqzsy@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Kill stray URB at exitingTakashi Iwai2017-10-102-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB-audio driver may leave a stray URB for the mixer interrupt when it exits by some error during probe. This leads to a use-after-free error as spotted by syzkaller like: ================================================================== BUG: KASAN: use-after-free in snd_usb_mixer_interrupt+0x604/0x6f0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x23d/0x350 mm/kasan/report.c:409 __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:430 snd_usb_mixer_interrupt+0x604/0x6f0 sound/usb/mixer.c:2490 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 .... Allocated by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772 kmalloc ./include/linux/slab.h:493 kzalloc ./include/linux/slab.h:666 snd_usb_create_mixer+0x145/0x1010 sound/usb/mixer.c:2540 create_standard_mixer_quirk+0x58/0x80 sound/usb/quirks.c:516 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 create_composite_quirk+0x1c4/0x3e0 sound/usb/quirks.c:59 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 usb_audio_probe+0x1040/0x2c10 sound/usb/card.c:618 .... Freed by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524 slab_free_hook mm/slub.c:1390 slab_free_freelist_hook mm/slub.c:1412 slab_free mm/slub.c:2988 kfree+0xf6/0x2f0 mm/slub.c:3919 snd_usb_mixer_free+0x11a/0x160 sound/usb/mixer.c:2244 snd_usb_mixer_dev_free+0x36/0x50 sound/usb/mixer.c:2250 __snd_device_free+0x1ff/0x380 sound/core/device.c:91 snd_device_free_all+0x8f/0xe0 sound/core/device.c:244 snd_card_do_free sound/core/init.c:461 release_card_device+0x47/0x170 sound/core/init.c:181 device_release+0x13f/0x210 drivers/base/core.c:814 .... Actually such a URB is killed properly at disconnection when the device gets probed successfully, and what we need is to apply it for the error-path, too. In this patch, we apply snd_usb_mixer_disconnect() at releasing. Also introduce a new flag, disconnected, to struct usb_mixer_interface for not performing the disconnection procedure twice. Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: line6: Fix leftover URB at error-path during probeTakashi Iwai2017-10-091-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While line6_probe() may kick off URB for a control MIDI endpoint, the function doesn't clean up it properly at its error path. This results in a leftover URB action that is eventually triggered later and causes an Oops like: general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 0 Comm: swapper/1 Not tainted RIP: 0010:usb_fill_bulk_urb ./include/linux/usb.h:1619 RIP: 0010:line6_start_listen+0x3fe/0x9e0 sound/usb/line6/driver.c:76 Call Trace: <IRQ> line6_data_received+0x1f7/0x470 sound/usb/line6/driver.c:326 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 usb_hcd_giveback_urb+0x337/0x420 drivers/usb/core/hcd.c:1845 dummy_timer+0xba9/0x39f0 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x2a2/0x940 kernel/time/timer.c:1281 .... Since the whole clean-up procedure is done in line6_disconnect() callback, we can simply call it in the error path instead of open-coding the whole again. It'll fix such an issue automagically. The bug was spotted by syzkaller. Fixes: eedd0e95d355 ("ALSA: line6: Don't forget to call driver's destructor at error path") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: line6: Fix NULL dereference at podhd_disconnect()Takashi Iwai2017-10-091-1/+2
| | | | | | | | | | | | | | When podhd_init() failed with the acquiring a ctrl i/f, the line6 helper still calls the disconnect callback that eventually calls again usb_driver_release_interface() with the NULL intf. Put the proper NULL check before calling it for avoiding an Oops. Fixes: fc90172ba283 ("ALSA: line6: Claim pod x3 usb data interface") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: line6: Fix missing initialization before error pathTakashi Iwai2017-10-091-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error path in podhd_init() tries to clear the pending timer, while the timer object is initialized at the end of init sequence, thus it may hit the uninitialized object, as spotted by syzkaller: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 1845 Comm: kworker/1:2 Not tainted 4.14.0-rc2-42613-g1488251d1a98 #238 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769 __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385 lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002 del_timer_sync+0x12c/0x280 kernel/time/timer.c:1237 podhd_disconnect+0x8c/0x160 sound/usb/line6/podhd.c:299 line6_probe+0x844/0x1310 sound/usb/line6/driver.c:783 podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474 .... For addressing it, assure the initializations of timer and work by moving them to the beginning of podhd_init(). Fixes: 790869dacc3d ("ALSA: line6: Add support for POD X3") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: seq: Fix copy_from_user() call inside lockTakashi Iwai2017-10-092-8/+20
| | | | | | | | | | | | | | | | | | | | | The event handler in the virmidi sequencer code takes a read-lock for the linked list traverse, while it's calling snd_seq_dump_var_event() in the loop. The latter function may expand the user-space data depending on the event type. It eventually invokes copy_from_user(), which might be a potential dead-lock. The sequencer core guarantees that the user-space data is passed only with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it and always takes read-lock(). For avoiding the problem above, this patch introduces rwsem for non-atomic case, while keeping rwlock for atomic case. Also while we're at it: the superfluous irq flags is dropped in snd_virmidi_input_open(). Reported-by: Jia-Ju Bai <baijiaju1990@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: usb-audio: Add sample rate quirk for Plantronics P610Kai-Heng Feng2017-10-091-0/+1
| | | | | | | | | | Like other Plantronics devices, P610 does not support sample rate reading. Apply sample rate quirk to it. BugLink: https://bugs.launchpad.net/bugs/1719853 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Linux 4.14-rc4v4.14-rc4Linus Torvalds2017-10-091-1/+1
|
* Merge tag 'scsi-fixes' of ↵Linus Torvalds2017-10-078-31/+36
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: - a couple of serious fixes: use after free and blacklist for WRITE SAME - one error leg fix: write_pending failure - one user experience problem: do not override max_sectors_kb - one minor unused function removal * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvscsis: Fix write_pending failure path scsi: libiscsi: Remove iscsi_destroy_session scsi: libiscsi: Fix use-after-free race during iscsi_session_teardown scsi: sd: Do not override max_sectors_kb sysfs setting scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP
| * scsi: ibmvscsis: Fix write_pending failure pathBryant G. Ly2017-10-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | For write_pending if the queue is down or client failed then return -EIO so that LIO can properly process the completed command. Prior we returned 0 since LIO could not handle it properly. Now with commit fa7e25cf13a6 ("target: Fix unknown fabric callback queue-full errors") that patch addresses LIO's ability to handle things right. Signed-off-by: Bryant G. Ly <bgly@us.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libiscsi: Remove iscsi_destroy_sessionKhazhismel Kumykov2017-10-032-17/+0
| | | | | | | | | | | | | | | | | | iscsi_session_teardown was the only user of this function. Function currently is just short for iscsi_remove_session + iscsi_free_session. Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libiscsi: Fix use-after-free race during iscsi_session_teardownKhazhismel Kumykov2017-10-031-4/+4
| | | | | | | | | | | | | | | | | | | | Session attributes exposed through sysfs were freed before the device was destroyed, resulting in a potential use-after-free. Free these attributes after removing the device. Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Acked-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: sd: Do not override max_sectors_kb sysfs settingMartin K. Petersen2017-10-031-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A user may lower the max_sectors_kb setting in sysfs to accommodate certain workloads. Previously we would always set the max I/O size to either the block layer default or the optional preferred I/O size reported by the device. Keep the current heuristics for the initial setting of max_sectors_kb. For subsequent invocations, only update the current queue limit if it exceeds the capabilities of the hardware. Cc: <stable@vger.kernel.org> Reported-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAPMartin K. Petersen2017-10-034-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SBC-4 states: "A MAXIMUM UNMAP LBA COUNT field set to a non-zero value indicates the maximum number of LBAs that may be unmapped by an UNMAP command" "A MAXIMUM WRITE SAME LENGTH field set to a non-zero value indicates the maximum number of contiguous logical blocks that the device server allows to be unmapped or written in a single WRITE SAME command." Despite the spec being clear on the topic, some devices incorrectly expect WRITE SAME commands with the UNMAP bit set to be limited to the value reported in MAXIMUM UNMAP LBA COUNT in the Block Limits VPD. Implement a blacklist option that can be used to accommodate devices with this behavior. Cc: <stable@vger.kernel.org> Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com> Reported-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | Merge branch 'i2c/for-current-4.14' of ↵Linus Torvalds2017-10-075-10/+14
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has three driver fixes for the newly introduced drivers and one ID addition for the i801 driver" * 'i2c/for-current-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: make structure stm32f7_setup static const i2c: ensure termination of *_device_id tables i2c: i801: Add support for Intel Cedar Fork i2c: stm32f7: fix setup structure
| * | i2c: i2c-stm32f7: make structure stm32f7_setup static constColin Ian King2017-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The structure stm32f7_setup is local to the source and does not need to be in global scope, make it static const. Cleans up sparse warning: symbol 'stm32f7_setup' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: ensure termination of *_device_id tablesThomas Meyer2017-10-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Make sure (of/i2c/platform)_device_id tables are NULL terminated. Found by coccinelle spatch "misc/of_table.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: i801: Add support for Intel Cedar ForkJarkko Nikula2017-10-053-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Add PCI ID for Intel Cedar Fork PCH. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
| * | i2c: stm32f7: fix setup structurePierre-Yves MORDRET2017-10-051-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | I2C drive setup structure is not properly allocated. Make it static instead of pointer to store driver data. Fixes: aeb068c5721485 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | | Merge tag 'mmc-v4.14-rc3' of ↵Linus Torvalds2017-10-0711-162/+81
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix driver strength selection when selecting hs400es - Delete bounce buffer handling: This change fixes a problem related to how bounce buffers are being allocated. However, instead of trying to fix that, let's just remove the mmc bounce buffer code altogether, as it has practically no use. MMC host: - meson-gx: A couple of fixes related to clock/phase/tuning - sdhci-xenon: Fix clock resource by adding an optional bus clock" * tag 'mmc-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock mmc: meson-gx: include tx phase in the tuning process mmc: meson-gx: fix rx phase reset mmc: meson-gx: make sure the clock is rounded down mmc: Delete bounce buffer handling mmc: core: add driver strength selection when selecting hs400es
| * | | mmc: sdhci-xenon: Fix clock resource by adding an optional bus clockGregory CLEMENT2017-10-043-9/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock is optional because not all the SoCs need them but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updating accordingly. Without this patch the kernel hand during boot if the mvpp2.2 network driver was not present in the kernel. Indeed the clock needed by the xenon controller was set by the network driver. Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality)" CC: Stable <stable@vger.kernel.org> Tested-by: Zhoujie Wu <zjwu@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * | | mmc: meson-gx: include tx phase in the tuning processJerome Brunet2017-10-041-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been reported that some platforms (odroid-c2) may require a different tx phase setting to operate at high speed (hs200 and hs400) To improve the situation, this patch includes tx phase in the tuning process. Fixes: d341ca88eead ("mmc: meson-gx: rework tuning function") Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * | | mmc: meson-gx: fix rx phase resetJerome Brunet2017-10-041-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Resetting the phase when POWER_ON is set the set_ios() call means that the phase is reset almost every time the set_ios() is called, while the expected behavior was to reset the phase on a power cycle. This had gone unnoticed until now because in all mode (except hs400) the tuning is done after the last to set_ios(). In such case, the tuning result is used anyway. In HS400, there are a few calls to set_ios() after the tuning is done, overwriting the tuning result. Resetting the phase on POWER_UP instead of POWER_ON solve the problem. Fixes: d341ca88eead ("mmc: meson-gx: rework tuning function") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * | | mmc: meson-gx: make sure the clock is rounded downJerome Brunet2017-10-041-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using CLK_DIVIDER_ROUND_CLOSEST is unsafe as the mmc clock could be rounded to a rate higher the specified rate. Removing this flag ensure that, if the rate needs to be rounded, it will be rounded down. Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * | | mmc: Delete bounce buffer handlingLinus Walleij2017-10-046-132/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In may, Steven sent a patch deleting the bounce buffer handling and the CONFIG_MMC_BLOCK_BOUNCE option. I chose the less invasive path of making it a runtime config option, and we merged that successfully for kernel v4.12. The code is however just standing in the way and taking up space for seemingly no gain on any systems in wide use today. Pierre says the code was there to improve speed on TI SDHCI controllers on certain HP laptops and possibly some Ricoh controllers as well. Early SDHCI controllers lacked the scatter-gather feature, which made software bounce buffers a significant speed boost. We are clearly talking about the list of SDHCI PCI-based MMC/SD card readers found in the pci_ids[] list in drivers/mmc/host/sdhci-pci-core.c. The TI SDHCI derivative is not supported by the upstream kernel. This leaves the Ricoh. What we can however notice is that the x86 defconfigs in the kernel did not enable CONFIG_MMC_BLOCK_BOUNCE option, which means that any such laptop would have to have a custom configured kernel to actually take advantage of this bounce buffer speed-up. It simply seems like there was a speed optimization for the Ricoh controllers that noone was using. (I have not checked the distro defconfigs but I am pretty sure the situation is the same there.) Bounce buffers increased performance on the OMAP HSMMC at one point, and was part of the original submission in commit a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3") This optimization was removed in commit 0ccd76d4c236 ("omap_hsmmc: Implement scatter-gather emulation") which found that scatter-gather emulation provided even better performance. The same was introduced for SDHCI in commit 2134a922c6e7 ("sdhci: scatter-gather (ADMA) support") I am pretty positively convinced that software scatter-gather emulation will do for any host controller what the bounce buffers were doing. Essentially, the bounce buffer was a reimplementation of software scatter-gather-emulation in the MMC subsystem, and it should be done away with. Cc: Pierre Ossman <pierre@ossman.eu> Cc: Juha Yrjola <juha.yrjola@solidboot.com> Cc: Steven J. Hill <Steven.Hill@cavium.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Suggested-by: Steven J. Hill <Steven.Hill@cavium.com> Suggested-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * | | mmc: core: add driver strength selection when selecting hs400esChanho Min2017-10-021-17/+19
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver strength selection is missed and required when selecting hs400es. So, It is added here. Fixes: 81ac2af65793ecf ("mmc: core: implement enhanced strobe support") Cc: stable@vger.kernel.org Signed-off-by: Hankyung Yu <hankyung.yu@lge.com> Signed-off-by: Chanho Min <chanho.min@lge.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | | Merge tag 'hwmon-for-linus-v4.14-rc4' of ↵Linus Torvalds2017-10-071-8/+11
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix up error path in xgene driver" * tag 'hwmon-for-linus-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (xgene) Fix up error handling path mixup in 'xgene_hwmon_probe()'
| * | | hwmon: (xgene) Fix up error handling path mixup in 'xgene_hwmon_probe()'Christophe Jaillet2017-10-011-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2ca492e22cb7 has moved the call to 'kfifo_alloc()' from after the main 'if' statement to before it. But it has not updated the error handling paths accordingly. Fix all that: - if 'kfifo_alloc()' fails we can return directly - direct returns after 'kfifo_alloc()' must now go to 'out_mbox_free' - 'goto out_mbox_free' must be replaced by 'goto out', otherwise the '[pcc_]mbox_free_channel()' call will be missed. Fixes: 2ca492e22cb7 ("hwmon: (xgene) Fix crash when alarm occurs before driver probe") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | | | Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2017-10-073-5/+23
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: - build fix to export the clk_bulk_prepare() symbol - suspend fix for Samsung Exynos SoCs where we need to keep clks on across suspend - two critical clk markings for clks that shouldn't ever turn off on Rockchip SoCs - a fix for a copy-paste mistake on Rockchip rk3128 causing some clks to touch the same bit and trample over one another * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: samsung: exynos4: Enable VPLL and EPLL clocks for suspend/resume cycle clk: Export clk_bulk_prepare() clk: rockchip: add sclk_timer5 as critical clock on rk3128 clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs error clk: rockchip: add pclk_pmu as critical clock on rk3128
| * | | | clk: samsung: exynos4: Enable VPLL and EPLL clocks for suspend/resume cycleMarek Szyprowski2017-10-041-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6edfa11cb396 ("clk: samsung: Add enable/disable operation for PLL36XX clocks") added enable/disable operations to PLL clocks. Prior that VPLL and EPPL clocks were always enabled because the enable bit was never touched. Those clocks have to be enabled during suspend/resume cycle, because otherwise board fails to enter sleep mode. This patch enables them unconditionally before entering system suspend state. System restore function will set them to the previous state saved in the register cache done before that unconditional enable. Fixes: 6edfa11cb396 ("clk: samsung: Add enable/disable operation for PLL36XX clocks") CC: stable@vger.kernel.org # v4.13 Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | | Merge tag 'v4.14-rockchip-clkfixes-1' of ↵Stephen Boyd2017-09-291-5/+7
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes Pull Rockchip clk driver fixes from Heiko Stuebner: Some smallish fixes for the rk3128 clock support including some register errors and some clocks that should be critical for safe usage. * tag 'v4.14-rockchip-clkfixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: add sclk_timer5 as critical clock on rk3128 clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs error clk: rockchip: add pclk_pmu as critical clock on rk3128
| | * | | | clk: rockchip: add sclk_timer5 as critical clock on rk3128Elaine Zhang2017-09-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sclk_timer5 is for arm arch counter, so need always on. but no dts node to handle this clk, so make it as critical clock Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs errorElaine Zhang2017-09-171-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A copy-paste error made them use the wrong bits in the register. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | clk: rockchip: add pclk_pmu as critical clock on rk3128Elaine Zhang2017-09-171-1/+2
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pclk_pmu need always on, and no dts node to handle this clk, so make it as critical clock Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * / / / clk: Export clk_bulk_prepare()Bjorn Andersson2017-09-291-0/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow clk_bulk_prepare() to be referenced by kernel modules by adding the missing EXPORT_SYMBOL_GPL(). Fixes: 266e4e9d9150 ("clk: add clk_bulk_get accessories") Reported-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* | | | Merge tag 'arc-4.14-rc4' of ↵Linus Torvalds2017-10-0717-28/+130
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC udpates from Vineet Gupta: - updates for various platforms - boot log updates for upcoming HS48 family of cores (dual issue) * tag 'arc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz ARC: fix allnoconfig build warning ARCv2: boot log: identify HS48 cores (dual issue) ARC: boot log: decontaminate ARCv2 ISA_CONFIG register arc: remove redundant UTS_MACHINE define in arch/arc/Makefile ARC: [plat-eznps] Update platform maintainer as Noam left ARC: [plat-hsdk] use actual clk driver to manage cpu clk ARC: [*defconfig] Reenable soft lock-up detector ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequency ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequency ARC: [plat-axs103] Add temporary quirk to reset ethernet IP
| * | | | ARC: [plat-hsdk]: Add reset controller node to manage ethernet resetEugeniy Paltsev2017-10-062-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DW ethernet controller on HSDK hangs sometimes after SW reset, so add reset node to make possible to reset DW ethernet controller HW. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHzEugeniy Paltsev2017-10-041-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add temporary fix to HSDK platform code to setup CPU frequency to 1GHz on early boot. We can remove this fix when smart hsdk pll driver will be introduced, see discussion: https://www.mail-archive.com/linux-snps-arc@lists.infradead.org/msg02689.html Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | ARC: fix allnoconfig build warningVineet Gupta2017-10-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Reported-by: Dmitrii Kolesnichenko <dmitrii@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | ARCv2: boot log: identify HS48 cores (dual issue)Vineet Gupta2017-10-042-4/+16
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | ARC: boot log: decontaminate ARCv2 ISA_CONFIG registerVineet Gupta2017-10-042-8/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARCv2 ISA_CONFIG and ARC700_BUILD build config registers are not compatible. cpuinfo_arc had isa info placeholder which was mashup of bits form both. Untangle this by defining it off of ARCv2 ISA info and it is fine even for ARC700 since former is a super set of latter (ARC700 buildonly has 2 bits for atomics and stack check). At runtime, we treat ARCv2 ISA info as a generic placeholder but populate it correctly depending on ARC700 or HS. This paves way for adding more HS specific bits in isa info which was colliding with the extra bits for arc700. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | arc: remove redundant UTS_MACHINE define in arch/arc/MakefileMasahiro Yamada2017-10-041-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The top-level Makefile sets the default of UTS_MACHINE to $(ARCH). If ARCH and UTS_MACHINE match, arch/$(ARCH)/Makefile need not specify UTS_MACHINE explicitly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | ARC: [plat-eznps] Update platform maintainer as Noam leftVineet Gupta2017-10-041-1/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | ARC: [plat-hsdk] use actual clk driver to manage cpu clkEugeniy Paltsev2017-10-042-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With corresponding clk driver now merged upstream, switch to it. - core_clk now represent the PLL (vs. fixed clk before) - input_clk represent the clk signal src for PLL (basically xtal) Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | ARC: [*defconfig] Reenable soft lock-up detectorAlexey Brodkin2017-10-047-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 92e5aae45778 "kernel/watchdog: split up config options" introduced SOFTLOCKUP_DETECTOR which selects LOCKUP_DETECTOR instead of the latter to be selected itself. We need to adjust our defconfigs accordingly. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequencyEugeniy Paltsev2017-10-041-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DW sdio controller has external ciu clock divider controlled via register in SDIO IP. It divides sdio_ref_clk (which comes from CGU) by 16 for default. So default mmcclk clock (which comes to sdk_in) is 25000000 Hz. So fix wrong current value (50000000 Hz) to actual 25000000 Hz. Note this is a preventive fix, in line with similar change for HSDK where this was actually needed. see: http://lists.infradead.org/pipermail/linux-snps-arc/2017-September/002924.html Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequencyEugeniy Paltsev2017-10-041-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DW sdio controller has external ciu clock divider controlled via register in SDIO IP. Due to its unexpected default value (it should divide by 1 but it divides by 8) SDIO IP uses wrong ciu clock and works unstable So add temporary fix and change clock frequency from 100000000 to 12500000 Hz until we fix dw sdio driver itself. Fixes SNPS STAR 9001204800 Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| * | | | ARC: [plat-axs103] Add temporary quirk to reset ethernet IPEugeniy Paltsev2017-10-041-0/+7
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DW ethernet controller on AXS10x hangs sometimes after SW reset, so add temporary quirk to reset DW ethernet controller IP core. This quirk can be removed after axs10x reset driver (see http://patchwork.ozlabs.org/patch/800273/) or simple reset driver (see https://patchwork.kernel.org/patch/9903375/) will be available in upstream. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* | | | Merge tag 'xfs-4.14-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds2017-10-072-3/+30
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull xfs fixes from Darrick Wong: - fix a race between overlapping copy on write aio - fix cow fork swapping when we defragment reflinked files * tag 'xfs-4.14-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: handle racy AIO in xfs_reflink_end_cow xfs: always swap the cow forks when swapping extents
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-29 00:26:23 +0100