summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* w1: don't allow arbitrary users to remove w1 devicesBrian Swetland2010-10-281-4/+4
| | | | | | | | | | | | | | The search/pullup/add/remove device attributes were 0666 which would allow arbitrary users to affect the 1 wire bus. Change to 0664 to prevent that. I found this patch in the Android tree, apparently this has never been sent upstream so doing it now. Signed-off-by: Brian Swetland <swetland@google.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* alpha: remove dma64_addr_t usageFUJITA Tomonori2010-10-281-2/+2
| | | | | | | | | | | dma_addr_t is always 64 bit on alpha. So let's use dma_addr_t instead. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mips: remove dma64_addr_t usageFUJITA Tomonori2010-10-281-1/+1
| | | | | | | | | | | | | | | dma64_addr_t looks pointless (at least there is no point that an architecture has the own dma64_addr_t typedef). dma_addr_t is set to 32 or 64 bits appropriately. You can use u64 at places where you know that 64 bit address is always necessary. Let's use u64 instead for mips. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sparc: remove dma64_addr_t usageFUJITA Tomonori2010-10-281-1/+1
| | | | | | | | | | | | | | | | | | dma64_addr_t looks pointless (at least there is no point that an architecture has the own dma64_addr_t typedef). dma_addr_t is set to 32 or 64 bits appropriately. You can use u64 at places where you know that 64 bit address is always necessary. Let's use u64 instead for sparc32. Looks like PCI654_REQUIRED_MASK or PCI64_ADR_BASE isn't used. They can be removed? Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fuse: use release_pages()Miklos Szeredi2010-10-282-6/+2
| | | | | | | | | | | | Replace iterated page_cache_release() with release_pages(), which is faster and shorter. Needs release_pages() to be exported to modules. Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* taskstats: use real microsecond granularity for CPU timesMichael Holzheu2010-10-285-23/+21
| | | | | | | | | | | | | | | | | | | | | | The taskstats interface uses microsecond granularity for the user and system time values. The conversion from cputime to the taskstats values uses the cputime_to_msecs primitive which effectively limits the granularity to milliseconds. Add the cputime_to_usecs primitive for architectures that have better, more precise CPU time values. Remove cputime_to_msecs primitive because there are no more users left. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Luck Tony <tony.luck@intel.com> Cc: Shailabh Nagar <nagar1234@in.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shailabh Nagar <nagar@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* taskstats: split fill_pid functionMichael Holzheu2010-10-281-29/+21
| | | | | | | | | | Separate the finding of a task_struct by pid or tgid from filling the taskstats data. This makes the code more readable. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* taskstats: separate taskstats commandsMichael Holzheu2010-10-281-40/+78
| | | | | | | | | | Move each taskstats command into a single function. This makes the code more readable and makes it easier to add new commands. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* delayacct: align to 8 byte boundary on 64-bit systemsJeff Mahoney2010-10-281-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | prepare_reply() sets up an skb for the response. The payload contains: +--------------------------------+ | genlmsghdr - 4 bytes | +--------------------------------+ | NLA header - 4 bytes | /* Aggregate header */ +-+------------------------------+ | | NLA header - 4 bytes | /* PID header */ | +------------------------------+ | | pid/tgid - 4 bytes | | +------------------------------+ | | NLA header - 4 bytes | /* stats header */ | + -----------------------------+ <- oops. aligned on 4 byte boundary | | struct taskstats - 328 bytes | +-+------------------------------+ The start of the taskstats struct must be 8 byte aligned on IA64 (and other systems with 8 byte alignment rules for 64-bit types) or runtime alignment warnings will be issued. This patch pads the pid/tgid field out to sizeof(long), which forces the alignment of taskstats. The getdelays userspace code is ok with this since it assumes 32-bit pid/tgid and then honors that header's length field. An array is used to avoid exposing kernel memory contents to userspace in the response. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* delay-accounting: reimplement -c for getdelays.c to report information on a ↵Mel Gorman2010-10-281-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | target command Task delay-accounting was identified as one means of determining how long a process spends in congestion_wait() without adding new statistics. For example, if the workload should not be doing IO, delay-accounting could reveal how long it was spending in unexpected IO or delays. Unfortunately, on closer examination it was clear that getdelays does not act as documented. Commit a3baf649 ("per-task-delay-accounting: documentation") added Documentation/accounting/getdelays.c with a -c switch that was documented to fork/exec a child and report statistics on it but for reasons that are unclear to me, commit 9e06d3f9 deleted support for this switch but did not update the documentation. It might be an oversight or it might be because the control flow of the program meant that accounting information would be printed once early in the lifetime of the program making it of limited use. This patch reimplements -c for getdelays.c to act as documented. Unlike the original version, it waits until the command completes before printing any information on it. An example of it being used looks like $ ./getdelays -d -c find /home/mel -name mel print delayacct stats ON /home/mel /home/mel/.notes-wine/drive_c/windows/profiles/mel /home/mel/.wine/drive_c/windows/profiles/mel /home/mel/git-configs/dot.kde/share/apps/konqueror/home/mel PID 5923 CPU count real total virtual total delay total 42779 5051232096 5164722692 564207988 IO count delay total 41727 97804147758 SWAP count delay total 0 0 RECLAIM count delay total 0 0 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Balbir Singh <balbir@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* namespaces Kconfig: move namespace menu location after the cgroupDaniel Lezcano2010-10-281-52/+52
| | | | | | | | | | | | | | | We have the namespaces as a menuconfig like the cgroup. The cgroup and the namespace are two base bricks for the containers. It is more logical to put the namespace menu right after the cgroup menu. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* namespaces Kconfig: remove the cgroup device whitelist experimental tagDaniel Lezcano2010-10-281-1/+0
| | | | | | | | | | | | | This subsystem is merged since a long time now, I think we can consider it mature enough. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* namespaces Kconfig: remove pointless cgroup dependencyDaniel Lezcano2010-10-281-10/+4
| | | | | | | | | | | | | The different cgroup subsystems are under the cgroup submenu. The dependency between the cgroups and the menu subsystems is pointless. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: Li Zefan <lizf@cn.fujitsu.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* namespaces Kconfig: make namespace a submenuDaniel Lezcano2010-10-281-6/+8
| | | | | | | | | | | | Make the namespaces config option a submenu. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* namespaces: default all the namespaces to 'yes' when CONFIG_NAMESPACES is ↵Daniel Lezcano2010-10-281-2/+5
| | | | | | | | | | | | | | | selected As the different namespaces depend on 'CONFIG_NAMESPACES', it is logical to enable all the namespaces when we enable NAMESPACES. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: David Miller <davem@davemloft.net> Acked-By: Matt Helsley <matthltc@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* namespaces: remove pid_ns and net_ns experimental statusDaniel Lezcano2010-10-281-6/+3
| | | | | | | | | | | | The pid namespace is in the kernel since 2.6.27 and the net_ns since 2.6.29. They are enabled in the distro by default and used by userspace component. They are mature enough to remove the 'experimental' label. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: fix destructive port EM initialization for Tsi568Alexandre Bounine2010-10-281-5/+10
| | | | | | | | | | | | | | | | Replace possibly damaging broadcast writes into the per-port SP_MODE registers with individual writes for each port. This will preserve individual port configurations in case if ports are configured differently. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: fix maximum port number in tsi57x EM initializationAlexandre Bounine2010-10-281-1/+2
| | | | | | | | | | | | | | Replace hardcoded maximum port number with actual reported number of switch ports. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: fix IDLE2 bits corruptionAlexandre Bounine2010-10-282-9/+3
| | | | | | | | | | | | | | | RapidIO spec v.2.1 adds Idle Sequence 2 into LP-Serial Physical Layer. The fix ensures that corresponding bits are not corrupted during error handling. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add handling of redundant routesAlexandre Bounine2010-10-285-51/+64
| | | | | | | | | | | | | | | | | | | | | | Detects RIO link to the already enumerated device and properly sets links between device objects. Changes to the enumeration/discovery logic: 1. Use Master Enable bit to signal end of the enumeration - agents may start their discovery process as soon as they see this bit set (Component Tag register was used before for this purpose). 2. Enumerator sets Component Tag (!= 0) immediately during device setup. This allows to identify the device if the redundant route exists in a RIO system. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add support for IDT CPS Gen2 switchesAlexandre Bounine2010-10-285-0/+462
| | | | | | | | | | | | | | Add the RIO switch driver and definitions for IDT CPS-1848 and CPS-1616 Gen2 devices. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add device access check into the enumerationAlexandre Bounine2010-10-283-1/+9
| | | | | | | | | | | | | | | Add explicit device access check before performing device enumeration. This gives a chance to clear possible link error conditions by issuing safe maintenance read request(s). Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add handling of orphan port-write messageAlexandre Bounine2010-10-282-5/+110
| | | | | | | | | | | | | | | | Add check for access to port-write (PW) message source device before processing the PW message. If source RIO device is not available (power down or RIO link failure) trace back to a last available switch/port on the PW message route and service failure at that point. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: modify sysfs initialization for switchesAlexandre Bounine2010-10-282-7/+25
| | | | | | | | | | | | | | | 1. Change to create attribute "routes" only for switches. 2. Add a switch-specific callback to create/remove proprietary attributes. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add default handler for error-stopped stateAlexandre Bounine2010-10-284-34/+206
| | | | | | | | | | | | | | The default error-stopped state handler provides recovery mechanism as defined by RIO specification. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: add relation links between RIO device structuresAlexandre Bounine2010-10-282-33/+27
| | | | | | | | | | | | | | | | Create back and forward links between RIO devices. These links are intended for use by error management and hot-plug extensions. Links for redundant RIO connections between switches are not set (will be fixed in a separate patch). Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: use stored ingress port number instead of register readAlexandre Bounine2010-10-283-28/+14
| | | | | | | | | | | | | | | The switch port information is obtained and stored during RIO device setup. Therefore repeated reads from Switch Port Information CAR may be removed. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio:powerpc/85xx: modify RIO port-write interrupt handlerAlexandre Bounine2010-10-281-29/+39
| | | | | | | | | | | | | | | | | - Rearrange RIO port-write interrupt handling to perform message buffering as soon as possible. - Modify to disable port-write controller when clearing Transaction Error (TE) bit. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* rapidio: fix RapidIO sysfs hierarchyAlexandre Bounine2010-10-283-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This set of RapidIO patches extends support for standard error recovery mechanism and adds new IDT Gen2 sRIO switch devices - CPS-1848 and CPS-1616. Implementation of the standard error-stopped state recovery mechanism (as defined by the RapidIO specification) is required for the new switches. Version 2 of this set of patches addresses received comments and fixes an error notification setup issue found in the idt_gen2.c after the first version was released. This patch: Make RapidIO devices appear in /sys/devices/rapidio directory instead of top of /sys/devices directory. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/mxser.c: fix compilation warning in mxser.cRakib Mullick2010-10-281-0/+4
| | | | | | | | | | | | | | | | | Both mxser_disable_must_enchance_mode() and mxser_get_must_hardware_id() called from function CheckIsMoxaMust(), when CONFIG_PCI=y. So mark both the functions under CONFIG_PCI. We were warned by the following warning. drivers/char/mxser.c:306: warning: `mxser_disable_must_enchance_mode' defined but not used drivers/char/mxser.c:391: warning: `mxser_get_must_hardware_id' defined but not used Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/rio/Makefile: replace the use of <module>-objs with <module>-yTracey Dent2010-10-281-1/+1
| | | | | | | | | | Changed <module>-objs to <module>-y in Makefile. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/pcmcia/ipwireless/Makefile: Makefile: replace the use of ↵Tracey Dent2010-10-281-1/+1
| | | | | | | | | | | | | | <module>-objs with <module>-y Changed <module>-objs to <module>-y in Makefile. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: David Sterba <dsterba@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/mwave/Makefile: clean upTracey Dent2010-10-281-2/+2
| | | | | | | | | | | Changed <module>-objs to <module>-y in Makefile and use ccflags-y option. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/ipmi/Makefile: replace the use of <module>-objs with <module>-yTracey Dent2010-10-281-1/+1
| | | | | | | | | | | Changed <module>-objs to <module>-y in Makefile. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/ip2/Makefile: replace the use of <module>-objs with <module>-yTracey Dent2010-10-281-1/+1
| | | | | | | | | | Changed <module>-objs to <module>-y in Makefile. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/synclink_gt.c: add extended sync featurePaul Fulghum2010-10-282-3/+113
| | | | | | | | Add support for extended byte synchronous mode feature of hardware. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/synclink_gt.c: fix information leak to userlandVasiliy Kulikov2010-10-281-0/+3
| | | | | | | | | | Structures tmp_params and new_line are copied to userland with some padding fields unitialized. It leads to leaking of stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Acked-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/ppdev.c: fix information leak to userlandVasiliy Kulikov2010-10-281-0/+1
| | | | | | | | | | Structure par_timeout is copied to userland with some padding fields unitialized. Field tv_usec has type __kernel_suseconds_t, it differs from tv_sec's type on some architectures. It leads to leaking of stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/applicom.c: fix information leak to userlandVasiliy Kulikov2010-10-281-0/+1
| | | | | | | | | Structure st_loc is copied to userland with some fields unitialized. It leads to leaking of stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* synclink_gt: fix per device lockingPaul Fulghum2010-10-281-13/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a long standing bug with per device locking. Each device has an associated spinlock for synchronizing access to hardware and state information with the ISR. A single hardware card has one or more devices. Bug: Non ISR code correctly acquires and releases the per device lock. ISR incorrectly always acquires and releases the lock of the first device on the card. The decoupled and list based nature of the ISR and deferred processing interaction allowed this to work in normal operation. Exceptional events like an application forcing hardware shutdown, reset, or reconfiguration while active can trigger the bug. Fixed ISR to acquire and release the per device lock. One exception is manipulation of the GPIO card resource which is global and effectively owned by the first device of the card. Non-ISR access to GPIO resource is changed to use lock of first device on card. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* SGI Altix IA64 mmtimer: eliminate long interval timer holdoffsDimitri Sivanich2010-10-281-28/+32
| | | | | | | | | | | | This patch for SGI Altix/IA64 eliminates interval long timer holdoffs in cases where we don't start an interval timer before the expiration time. This sometimes happens when a number of interval timers on the same shub with the same interval run simultaneously. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/hvc_console.c: remove unneeded __set_current_state(TASK_RUNNING)Andrew Morton2010-10-281-1/+0
| | | | | | | | | | | | This doesn't do anything. Cc: Timur Tabi <timur@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Amit Shah <amit.shah@redhat.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char/rocket.c: release_region or error pathDan Carpenter2010-10-281-1/+4
| | | | | | | | There was a release_region() missing on the error path. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ipmi: fix __init and __exit attribute locationsCorey Minyard2010-10-283-11/+11
| | | | | | | | | __init and __exit belong after the return type on functions, not before. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ipc: initialize structure memory to zero for compat functionsDan Rosenberg2010-10-282-0/+11
| | | | | | | | | | | | This takes care of leaking uninitialized kernel stack memory to userspace from non-zeroed fields in structs in compat ipc functions. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ipc/shm.c: add RSS and swap size information to /proc/sysvipc/shmHelge Deller2010-10-281-21/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel currently provides no functionality to analyze the RSS and swap space usage of each individual sysvipc shared memory segment. This patch adds this info for each existing shm segment by extending the output of /proc/sysvipc/shm by two columns for RSS and swap. Since shmctl(SHM_INFO) already provides a similiar calculation (it currently sums up all RSS/swap info for all segments), I did split out a static function which is now used by the /proc/sysvipc/shm output and shmctl(SHM_INFO). SAP products (esp. the SAP Netweaver ABAP Kernel) uses lots of big shared memory segments (we often have Linux systems with >= 16GB shm usage). Sometimes we get customer reports about "slow" system responses and while looking into their configurations we often find massive swapping activity on the system. With this patch it's now easy to see from the command line if and which shm segments gets swapped out (and how much) and can more easily give recommendations for system tuning. Without the patch it's currently not possible to do such shm analysis at all. Also... Add some spaces in front of the "size" field for 64bit kernels to get the columns correct if you cat the contents of the file. In sysvipc_shm_proc_show() the kernel prints the size value in "SPEC_SIZE" format, which is defined like this: #if BITS_PER_LONG <= 32 #define SIZE_SPEC "%10lu" #else #define SIZE_SPEC "%21lu" #endif So, if the header is not adjusted, the columns are not correctly aligned. I actually tested this on 32- and 64-bit and it seems correct now. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Manfred Spraul <manfred@colorfullife.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* exec: don't turn PF_KTHREAD off when a target command was not foundKOSAKI Motohiro2010-10-281-2/+1
| | | | | | | | | | | | | | | | | | Presently do_execve() turns PF_KTHREAD off before search_binary_handler(). THis has a theorical risk of PF_KTHREAD getting lost. We don't have to turn PF_KTHREAD off in the ENOEXEC case. This patch moves this flag modification to after the finding of the executable file. This is only a theorical issue because kthreads do not call do_execve() directly. But fixing would be better. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* /proc/stat: fix scalability of irq sum of all cpuKAMEZAWA Hiroyuki2010-10-283-8/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In /proc/stat, the number of per-IRQ event is shown by making a sum each irq's events on all cpus. But we can make use of kstat_irqs(). kstat_irqs() do the same calculation, If !CONFIG_GENERIC_HARDIRQ, it's not a big cost. (Both of the number of cpus and irqs are small.) If a system is very big and CONFIG_GENERIC_HARDIRQ, it does for_each_irq() for_each_cpu() - look up a radix tree - read desc->irq_stat[cpu] This seems not efficient. This patch adds kstat_irqs() for CONFIG_GENRIC_HARDIRQ and change the calculation as for_each_irq() look up radix tree for_each_cpu() - read desc->irq_stat[cpu] This reduces cost. A test on (4096cpusp, 256 nodes, 4592 irqs) host (by Jack Steiner) %time cat /proc/stat > /dev/null Before Patch: 2.459 sec After Patch : .561 sec [akpm@linux-foundation.org: unexport kstat_irqs, coding-style tweaks] [akpm@linux-foundation.org: fix unused variable 'per_irq_sum'] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: Jack Steiner <steiner@sgi.com> Acked-by: Jack Steiner <steiner@sgi.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* /proc/stat: scalability of irq num per cpuKAMEZAWA Hiroyuki2010-10-282-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | /proc/stat shows the total number of all interrupts to each cpu. But when the number of IRQs are very large, it take very long time and 'cat /proc/stat' takes more than 10 secs. This is because sum of all irq events are counted when /proc/stat is read. This patch adds "sum of all irq" counter percpu and reduce read costs. The cost of reading /proc/stat is important because it's used by major applications as 'top', 'ps', 'w', etc.... A test on a mechin (4096cpu, 256 nodes, 4592 irqs) shows %time cat /proc/stat > /dev/null Before Patch: 12.627 sec After Patch: 2.459 sec Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: Jack Steiner <steiner@sgi.com> Acked-by: Jack Steiner <steiner@sgi.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* procfs: fix /proc/softirqs formattingDavidlohr Bueso2010-10-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The length of the BLOCK_IPOLL string is making i's value be printed too far to the right. This patch fixes this and makes the output a bit neater. Currently: CPU0 HI: 0 TIMER: 599792 NET_TX: 2 NET_RX: 6 BLOCK: 80807 BLOCK_IOPOLL: 0 TASKLET: 20012 SCHED: 0 HRTIMER: 63 RCU: 619279 With patch: CPU0 HI: 0 TIMER: 585582 NET_TX: 2 NET_RX: 6 BLOCK: 80320 BLOCK_IOPOLL: 0 TASKLET: 19287 SCHED: 0 HRTIMER: 62 RCU: 604441 Signed-off-by: Davidlohr Bueso <dave@gnu.org> Acked-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 16:13:10 +0100