summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* net/ncsi: Use real net-device for response handlerJohn Wang2020-12-231-1/+1
| | | | | | | | | | | | When aggregating ncsi interfaces and dedicated interfaces to bond interfaces, the ncsi response handler will use the wrong net device to find ncsi_dev, so that the ncsi interface will not work properly. Here, we use the original net device to fix it. Fixes: 138635cc27c9 ("net/ncsi: NCSI response packet handler") Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Link: https://lore.kernel.org/r/20201223055523.2069-1-wangzhiqiang.bj@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: dcb: Validate netlink message in DCB handlerPetr Machata2020-12-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | DCB uses the same handler function for both RTM_GETDCB and RTM_SETDCB messages. dcb_doit() bounces RTM_SETDCB mesasges if the user does not have the CAP_NET_ADMIN capability. However, the operation to be performed is not decided from the DCB message type, but from the DCB command. Thus DCB_CMD_*_GET commands are used for reading DCB objects, the corresponding SET and DEL commands are used for manipulation. The assumption is that set-like commands will be sent via an RTM_SETDCB message, and get-like ones via RTM_GETDCB. However, this assumption is not enforced. It is therefore possible to manipulate DCB objects without CAP_NET_ADMIN capability by sending the corresponding command in an RTM_GETDCB message. That is a bug. Fix it by validating the type of the request message against the type used for the response. Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver") Signed-off-by: Petr Machata <me@pmachata.org> Link: https://lore.kernel.org/r/a2a9b88418f3a58ef211b718f2970128ef9e3793.1608673640.git.me@pmachata.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge branch 'net-ipa-gsi-interrupt-handling-fixes'Jakub Kicinski2020-12-231-33/+56
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alex Elder says: ==================== net: ipa: GSI interrupt handling fixes This series implements fixes for some issues related to handling interrupts when GSI channel and event ring commands complete. The first issue is that the completion condition for an event ring or channel command could occur while the associated interrupt is disabled. This would cause the interrupt to fire when it is subsequently enabled, even if the condition it signals had already been handled. The fix is to clear any pending interrupt conditions before re-enabling the interrupt. The second and third patches change how the success of an event ring or channel command is determined. These commands change the state of an event ring or channel. Previously the receipt of a completion interrupt was required to consider a command successful. Instead, a command is successful if it changes the state of the target event ring or channel in the way expected. This way the command can succeed even if the completion interrupt did not arrive while it was enabled. ==================== Link: https://lore.kernel.org/r/20201222180012.22489-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ipa: use state to determine event ring command successAlex Elder2020-12-231-12/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the same basic fix for event rings as the previous one does for channels. The result of issuing an event ring control command should be that the event ring changes state. If enabled, a completion interrupt signals that the event ring state has changed. This interrupt is enabled by gsi_evt_ring_command() and disabled again after the command has completed (or we time out). There is a window of time during which the command could complete successfully without interrupting. This would cause the event ring to transition to the desired new state. So whether a event ring command ends via completion interrupt or timeout, we can consider the command successful if the event ring has entered the desired state (and a failure if it has not, regardless of the cause). Fixes: b4175f8731f78 ("net: ipa: only enable GSI event control IRQs when needed") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ipa: use state to determine channel command successAlex Elder2020-12-231-21/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The result of issuing a channel control command should be that the channel changes state. If enabled, a completion interrupt signals that the channel state has changed. This interrupt is enabled by gsi_channel_command() and disabled again after the command has completed (or we time out). There is a window of time--after the completion interrupt is disabled but before the channel state is read--during which the command could complete successfully without interrupting. This would cause the channel to transition to the desired new state. So whether a channel command ends via completion interrupt or timeout, we can consider the command successful if the channel has entered the desired state (and a failure if it has not, regardless of the cause). Fixes: d6c9e3f506ae8 ("net: ipa: only enable generic command completion IRQ when needed"); Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: ipa: clear pending interrupts before enablingAlex Elder2020-12-231-0/+12
|/ | | | | | | | | | | | | | | | | | | We enable the completion interrupt for channel or event ring commands only when we issue them. The interrupt is disabled after the interrupt has fired, or after we have timed out waiting for it. If we time out, the command could complete after the interrupt has been disabled, causing a state change in the channel or event ring. The interrupt associated with that state change would be delivered the next time the completion interrupt is enabled. To avoid previous command completions interfering with new commands, clear all pending completion interrupts before re-enabling them for a new command. Fixes: b4175f8731f78 ("net: ipa: only enable GSI event control IRQs when needed") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* stmmac: intel: Add PCI IDs for TGL-H platformNoor Azura Ahmad Tarmizi2020-12-231-0/+4
| | | | | | | | | | | Add TGL-H PCI info and PCI IDs for the new TSN Controller to the list of supported devices. Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Link: https://lore.kernel.org/r/20201222160337.30870-1-muhammad.husaini.zulkifli@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: ipa: fix interconnect enable bugAlex Elder2020-12-231-2/+2
| | | | | | | | | | | | | | | When the core clock rate and interconnect bandwidth specifications were moved into configuration data, a copy/paste bug was introduced, causing the memory interconnect bandwidth to be set three times rather than enabling the three different interconnects. Fix this bug. Fixes: 91d02f9551501 ("net: ipa: use config data for clocking") Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201222151613.5730-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* virtio_net: Fix recursive call to cpus_read_lock()Jeff Dike2020-12-231-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | virtnet_set_channels can recursively call cpus_read_lock if CONFIG_XPS and CONFIG_HOTPLUG are enabled. The path is: virtnet_set_channels - calls get_online_cpus(), which is a trivial wrapper around cpus_read_lock() netif_set_real_num_tx_queues netif_reset_xps_queues_gt netif_reset_xps_queues - calls cpus_read_lock() This call chain and potential deadlock happens when the number of TX queues is reduced. This commit the removes netif_set_real_num_[tr]x_queues calls from inside the get/put_online_cpus section, as they don't require that it be held. Fixes: 47be24796c13 ("virtio-net: fix the set affinity bug when CPU IDs are not consecutive") Signed-off-by: Jeff Dike <jdike@akamai.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20201223025421.671-1-jdike@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge tag 'wireless-drivers-2020-12-22' of ↵Jakub Kicinski2020-12-2315-37/+118
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.11 First set of fixes for v5.11, more fixes than usual this time. For ath11k we have several fixes for QCA6390 PCI support and mt76 has several. Also one build fix for mt76. mt76 * fix two NULL pointer dereference * fix build error when CONFIG_MAC80211_MESH is disabled rtlwifi * fix use-after-free in firmware handling code ath11k * error handling fixes * fix crash found during connect and disconnect test * handle HT disable better * avoid printing qmi memory failure during firmware bootup * disable ASPM during firmware bootup * tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: MAINTAINERS: switch to different email address mt76: mt7915: fix MESH ifdef block mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queue mt76: sdio: remove wake logic in mt76s_process_tx_queue mt76: usb: remove wake logic in mt76u_status_worker ath11k: pci: disable ASPM L0sLs before downloading firmware ath11k: qmi: try to allocate a big block of DMA memory first rtlwifi: rise completion at the last step of firmware callback mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker ath11k: Fix ath11k_pci_fix_l1ss() ath11k: Fix error code in ath11k_core_suspend() ath11k: start vdev if a bss peer is already created ath11k: fix crash caused by NULL rx_channel ath11k: add missing null check on allocated skb ==================== Link: https://lore.kernel.org/r/20201222163727.D4336C433C6@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * MAINTAINERS: switch to different email addressArend van Spriel2020-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | Switching to private mail account as work email is polluted with a legal disclaimer. Just making it extra clear by changing the email address in the MAINTAINERS file as well. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Arend van Spriel <aspriel@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201220141807.17278-1-aspriel@gmail.com
| * mt76: mt7915: fix MESH ifdef blockRandy Dunlap2020-12-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a build error when CONFIG_MAC80211_MESH is not enabled: ../drivers/net/wireless/mediatek/mt76/mt7915/init.c:47:2: error: expected expression before '}' token }, { ^ Fixes: af901eb4ab80 ("mt76: mt7915: get rid of dbdc debugfs knob") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Shayne Chen <shayne.chen@mediatek.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: linux-wireless@vger.kernel.org Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201218173202.23159-1-rdunlap@infradead.org
| * mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queueLorenzo Bianconi2020-12-201-1/+5
| | | | | | | | | | | | | | | | | | | | Fix a possible NULL pointer dereference in mt76s_process_tx_queue that can occur if status thread runs before allocating tx queues Fixes: 6a618acb7e62 ("mt76: sdio: convert {status/net}_work to mt76_worker") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/b49c1b4edacd87b2241a9fd0431dd4864c8963f6.1607418933.git.lorenzo@kernel.org
| * mt76: sdio: remove wake logic in mt76s_process_tx_queueLorenzo Bianconi2020-12-201-12/+3
| | | | | | | | | | | | | | | | | | | | | | Similar to mmio/usb code path, remove wake logic in mt76s_process_tx_queue routine. Starting from commit 90d494c99a99 ("mt76: improve tx queue stop/wake"), the wake queue logic on the sdio status path is no longer necessary since the hw queues are no longer stopped on the mt76 tx path. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/d2d7d9d437f4dec2ef1df0ed070b9cf299f021ad.1607164041.git.lorenzo@kernel.org
| * mt76: usb: remove wake logic in mt76u_status_workerLorenzo Bianconi2020-12-201-7/+0
| | | | | | | | | | | | | | | | | | | | | | Similar to mmio code path, remove wake logic in mt76u_status_worker handler. Starting from commit 90d494c99a99 ("mt76: improve tx queue stop/wake")', the wake queue logic on the usb status path is no longer necessary since the hw queues are no longer stopped on the mt76 tx path. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/00009bf0cfdc9565e4432cad3ed51888c667c25d.1607164041.git.lorenzo@kernel.org
| * Merge ath-current from ↵Kalle Valo2020-12-2010-12/+101
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath.git fixes for 5.11. Major changes: ath11k * add null check for skb allocation * fix crash found during connect/disconnect stress testing * fix for HT disabled case * brown paperbag fixes for my bugs in suspend code * fix an unnecessary qmi allocation during firmware bootup * disable ASPM during firmware bootup to avoid issues
| | * ath11k: pci: disable ASPM L0sLs before downloading firmwareCarl Huang2020-12-182-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes QCA6390 doesn't switch to amss state as device enters L1ss state, so disable L0sL1s during firmware downloading. Driver recovers the ASPM to default value in start callback or powerdown callback. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608218530-15426-1-git-send-email-kvalo@codeaurora.org
| | * ath11k: qmi: try to allocate a big block of DMA memory firstCarl Huang2020-12-182-2/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not all firmware versions support allocating DMA memory in smaller blocks so first try to allocate big block of DMA memory for QMI. If the allocation fails, let firmware request multiple blocks of DMA memory with smaller size. This also fixes an unnecessary error message seen during ath11k probe on QCA6390: ath11k_pci 0000:06:00.0: Respond mem req failed, result: 1, err: 0 ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-22 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608127593-15192-1-git-send-email-kvalo@codeaurora.org
| | * ath11k: Fix ath11k_pci_fix_l1ss()Dan Carpenter2020-12-171-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All these conditions are reversed so presumably most of the function is dead code. This caused a spurious warning: [ 95.734922] ath11k_pci 0000:06:00.0: failed to set sysclk: 0 Fixes: 0699940755e9 ("ath11k: pci: fix L1ss clock unstable problem") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X9nGDHiTh+Z+asDy@mwanda
| | * ath11k: Fix error code in ath11k_core_suspend()Dan Carpenter2020-12-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "if (!ret)" condition is inverted and it should be "if (ret)". It means that we return success when we had intended to return an error code. This also caused a spurious warning even when the suspend was successful: [ 297.186612] ath11k_pci 0000:06:00.0: failed to suspend hif: 0 Fixes: d1b0c33850d2 ("ath11k: implement suspend for QCA6390 PCI devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X9nF17L2/EKOSbn/@mwanda
| | * ath11k: start vdev if a bss peer is already createdCarl Huang2020-12-173-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For QCA6390, bss peer must be created before vdev is to start. This change is to start vdev if a bss peer is created. Otherwise, ath11k delays to start vdev. This fixes an issue in a case where HT/VHT/HE settings change between authentication and association, e.g., due to the user space request to disable HT. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201211051358.9191-1-cjhuang@codeaurora.org
| | * ath11k: fix crash caused by NULL rx_channelCarl Huang2020-12-171-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During connect and disconnect stress test, crashed happened because ar->rx_channel is NULL. Fix it by checking whether ar->rx_channel is NULL. Crash stack is as below: RIP: 0010:ath11k_dp_rx_h_ppdu+0x110/0x230 [ath11k] [ 5028.808963] ath11k_dp_rx_wbm_err+0x14a/0x360 [ath11k] [ 5028.808970] ath11k_dp_rx_process_wbm_err+0x41c/0x520 [ath11k] [ 5028.808978] ath11k_dp_service_srng+0x25e/0x2d0 [ath11k] [ 5028.808982] ath11k_pci_ext_grp_napi_poll+0x23/0x80 [ath11k_pci] [ 5028.808986] net_rx_action+0x27e/0x400 [ 5028.808990] __do_softirq+0xfd/0x2bb [ 5028.808993] irq_exit+0xa6/0xb0 [ 5028.808995] do_IRQ+0x56/0xe0 [ 5028.808997] common_interrupt+0xf/0xf Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201211055613.9310-1-cjhuang@codeaurora.org
| | * ath11k: add missing null check on allocated skbColin Ian King2020-12-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the null check on a newly allocated skb is missing and this can lead to a null pointer dereference is the allocation fails. Fix this by adding a null check and returning -ENOMEM. Addresses-Coverity: ("Dereference null return") Fixes: 43ed15e1ee01 ("ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214232417.84556-1-colin.king@canonical.com
| * | rtlwifi: rise completion at the last step of firmware callbackPing-Ke Shih2020-12-171-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | request_firmware_nowait() which schedules another work is used to load firmware when USB is probing. If USB is unplugged before running the firmware work, it goes disconnect ops, and then causes use-after-free. Though we wait for completion of firmware work before freeing the hw, firmware callback rises completion too early. So I move it to the last step. usb 5-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2 rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin rtlwifi: Selected firmware is not available ================================================================== BUG: KASAN: use-after-free in rtl_fw_do_work.cold+0x68/0x6a drivers/net/wireless/realtek/rtlwifi/core.c:93 Write of size 4 at addr ffff8881454cff50 by task kworker/0:6/7379 CPU: 0 PID: 7379 Comm: kworker/0:6 Not tainted 5.10.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events request_firmware_work_func Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562 rtl_fw_do_work.cold+0x68/0x6a drivers/net/wireless/realtek/rtlwifi/core.c:93 request_firmware_work_func+0x12c/0x230 drivers/base/firmware_loader/main.c:1079 process_one_work+0x933/0x1520 kernel/workqueue.c:2272 worker_thread+0x64c/0x1120 kernel/workqueue.c:2418 kthread+0x38c/0x460 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296 The buggy address belongs to the page: page:00000000f54435b3 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1454cf flags: 0x200000000000000() raw: 0200000000000000 0000000000000000 ffffea00051533c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881454cfe00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8881454cfe80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8881454cff00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8881454cff80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8881454d0000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Reported-by: syzbot+65be4277f3c489293939@syzkaller.appspotmail.com Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201214053106.7748-1-pkshih@realtek.com
| * | mt76: mt76u: fix NULL pointer dereference in mt76u_status_workerLorenzo Bianconi2020-12-171-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following NULL pointer dereference in mt76u_status_worker that can occur if status thread runs before allocating tx queues [ 31.395373] BUG: kernel NULL pointer dereference, address: 000000000000002c [ 31.395769] #PF: supervisor read access in kernel mode [ 31.395985] #PF: error_code(0x0000) - not-present page [ 31.396178] PGD 0 P4D 0 [ 31.396277] Oops: 0000 [#1] SMP [ 31.396430] CPU: 3 PID: 337 Comm: mt76-usb-status Not tainted 5.10.0-rc1-kvm+ #49 [ 31.396703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-3.fc33 04/01/2014 [ 31.397048] RIP: 0010:mt76u_status_worker+0x2b/0x190 [ 31.397931] RSP: 0018:ffffc9000076fe98 EFLAGS: 00010282 [ 31.398118] RAX: 0000000000000001 RBX: ffff888111203fe8 RCX: 0000000000000000 [ 31.398400] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff888111203fe8 [ 31.398668] RBP: ffff888111201d00 R08: 000000000000038c R09: 000000000000009b [ 31.398952] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 31.399235] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810c987300 [ 31.399494] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 31.399767] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 31.399991] CR2: 000000000000002c CR3: 0000000103525000 CR4: 00000000000006a0 [ 31.400236] Call Trace: [ 31.400348] ? schedule+0x3e/0xa0 [ 31.400514] __mt76_worker_fn+0x71/0xa0 [ 31.400634] ? mt76_get_min_avg_rssi+0x110/0x110 [ 31.400827] kthread+0x118/0x130 [ 31.400984] ? __kthread_bind_mask+0x60/0x60 [ 31.401212] ret_from_fork+0x1f/0x30 [ 31.401353] Modules linked in: [ 31.401480] CR2: 000000000000002c [ 31.401627] ---[ end trace 8bf174505cc34851 ]--- [ 31.401798] RIP: 0010:mt76u_status_worker+0x2b/0x190 [ 31.402636] RSP: 0018:ffffc9000076fe98 EFLAGS: 00010282 [ 31.402829] RAX: 0000000000000001 RBX: ffff888111203fe8 RCX: 0000000000000000 [ 31.403118] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff888111203fe8 [ 31.403424] RBP: ffff888111201d00 R08: 000000000000038c R09: 000000000000009b [ 31.403689] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 31.403933] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810c987300 [ 31.404209] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 31.404482] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 31.404726] CR2: 000000000000002c CR3: 0000000103525000 CR4: 00000000000006a0 [ 31.405294] mt76x0u: probe of 1-1:1.0 failed with error -110 [ 31.406007] usb 1-1: USB disconnect, device number 2 [ 31.840756] usb 1-1: new high-speed USB device number 3 using xhci_hcd [ 32.461295] usb 1-1: reset high-speed USB device number 3 using xhci_hcd [ 32.659932] mt76x0u 1-1:1.0: ASIC revision: 76100002 MAC revision: 76502000 [ 33.197032] mt76x0u 1-1:1.0: EEPROM ver:02 fae:01 Fixes: 9daf27e62852 ("mt76: mt76u: use dedicated thread for status work") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/cd44dc407cf3e5f27688105d4a75fb1c68e62b06.1607419147.git.lorenzo@kernel.org
* | qede: fix offload for IPIP tunnel packetsManish Chopra2020-12-231-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | IPIP tunnels packets are unknown to device, hence these packets are incorrectly parsed and caused the packet corruption, so disable offlods for such packets at run time. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | docs: netdev-FAQ: fix question headers formattingBaruch Siach2020-12-231-67/+59
| | | | | | | | | | | | | | | | | | | | | | | | Join adjacent questions to a single question line. This fixes the formatting of questions that were not part of the heading. Also, drop Q: and A: prefixes. We don't need them now that questions and answers are visually separated. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Link: https://lore.kernel.org/r/f76078ba5547744f2ec178984c32fbc7dcd29a2b.1608454187.git.baruch@tkos.co.il Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: ethernet: mvneta: Fix error handling in mvneta_probeDinghao Liu2020-12-231-1/+1
| | | | | | | | | | | | | | | | | | | | When mvneta_port_power_up() fails, we should execute cleanup functions after label err_netdev to avoid memleak. Fixes: 41c2b6b4f0f80 ("net: ethernet: mvneta: Add back interface mode validation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20201220082930.21623-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ibmvnic: fix login buffer memory leakLijun Pan2020-12-231-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") frees login_rsp_buffer in release_resources() and send_login() because handle_login_rsp() does not free it. Commit f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") frees login_rsp_buffer in handle_login_rsp(). It seems unnecessary to free it in release_resources() and send_login(). There are chances that handle_login_rsp returns earlier without freeing buffers. Double-checking the buffer is harmless since release_login_buffer and release_login_rsp_buffer will do nothing if buffer is already freed. Fixes: f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") Fixes: 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201219213919.21045-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | MAINTAINERS: remove names from mailing list maintainersJakub Kicinski2020-12-231-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When searching for inactive maintainers it's useful to filter out mailing list addresses. Such "maintainers" will obviously never feature in a "From:" line of an email or a review tag. Since "L:" entries only provide the address of a mailing list without a fancy name extend this pattern to "M:" entries. Alternatively we could reserve M: entries for humans only and move the fake "maintainers" to L:. While I'd personally prefer to reserve M: for humans only, I'm not 100% that's a great choice either, given most L: entries are in fact open mailing lists with public archives. Link: https://lore.kernel.org/r/20201219185538.750076-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: stmmac: dwmac-meson8b: ignore the second clock inputMartin Blumenstingl2020-12-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dwmac glue registers on Amlogic Meson8b and newer SoCs has two clock inputs: - Meson8b and Meson8m2: MPLL2 and MPLL2 (the same parent is wired to both inputs) - GXBB, GXL, GXM, AXG, G12A, G12B, SM1: FCLK_DIV2 and MPLL2 All known vendor kernels and u-boots are using the first input only. We let the common clock framework automatically choose the "right" parent. For some boards this causes a problem though, specificially with G12A and newer SoCs. The clock input is used for generating the 125MHz RGMII TX clock. For the two input clocks this means on G12A: - FCLK_DIV2: 999999985Hz / 8 = 124999998.125Hz - MPLL2: 499999993Hz / 4 = 124999998.25Hz In theory MPLL2 is the "better" clock input because it's gets us 0.125Hz closer to the requested frequency than FCLK_DIV2. In reality however there is a resource conflict because MPLL2 is needed to generate some of the audio clocks. dwmac-meson8b probes first and sets up the clock tree with MPLL2. This works fine until the audio driver comes and "steals" the MPLL2 clocks and configures it with it's own rate (294909637Hz). The common clock framework happily changes the MPLL2 rate but does not reconfigure our RGMII TX clock tree, which then ends up at 73727409Hz, which is more than 40% off the requested 125MHz. Don't use the second clock input for now to force the common clock framework to always select the first parent. This mimics the behavior from the vendor driver and fixes the clock resource conflict with the audio driver on G12A boards. Once the common clock framework can handle this situation this change can be reverted again. Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Reported-by: Thomas Graichen <thomas.graichen@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: thomas graichen <thomas.graichen@gmail.com> Link: https://lore.kernel.org/r/20201219135036.3216017-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mvpp2: Fix GoP port 3 Networking Complex Control configurationsStefan Chulski2020-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | During GoP port 2 Networking Complex Control mode of operation configurations, also GoP port 3 mode of operation was wrongly set. Patch removes these configurations. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608462149-1702-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ppp: Fix PPPIOCUNBRIDGECHAN request numberGuillaume Nault2020-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | PPPIOCGL2TPSTATS already uses 54. This shouldn't be a problem in practice, but let's keep the logical decreasing assignment scheme. Fixes: 4cf476ced45d ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls") Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/e3a4c355e3820331d8e1fffef8522739aae58b57.1608380117.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | atm: idt77252: call pci_disable_device() on error pathDan Carpenter2020-12-221-1/+1
| | | | | | | | | | | | | | | | | | This error path needs to disable the pci device before returning. Fixes: ede58ef28e10 ("atm: remove deprecated use of pci api") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X93dmC4NX0vbTpGp@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ionic: account for vlan tag len in rx buffer lenShannon Nelson2020-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | Let the FW know we have enough receive buffer space for the vlan tag if it isn't stripped. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20201218215001.64696-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge branch 'ucc_geth-fixes'Jakub Kicinski2020-12-222-2/+10
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rasmus Villemoes says: ==================== ucc_geth fixes This is three bug fixes that fell out of a series of cleanups of the ucc_geth driver. ==================== Link: https://lore.kernel.org/r/20201218105538.30563-1-rasmus.villemoes@prevas.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()Rasmus Villemoes2020-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ugeth is the netdiv_priv() part of the netdevice. Accessing the memory pointed to by ugeth (such as done by ucc_geth_memclean() and the two of_node_puts) after free_netdev() is thus use-after-free. Fixes: 80a9fad8e89a ("ucc_geth: fix module removal") Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pramRasmus Villemoes2020-12-221-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Table 8-53 in the QUICC Engine Reference manual shows definitions of fields up to a size of 192 bytes, not just 128. But in table 8-111, one does find the text Base Address of the Global Transmitter Parameter RAM Page. [...] The user needs to allocate 128 bytes for this page. The address must be aligned to the page size. I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual; they both have this inconsistency (and the table numbers are the same). Adding a bit of debug printing, on my board the struct ucc_geth_tx_global_pram is allocated at offset 0x880, while the (opaque) ucc_geth_thread_data_tx gets allocated immediately afterwards, at 0x900. So whatever the engine writes into the thread data overlaps with the tail of the global tx pram (and devmem says that something does get written during a simple ping). I haven't observed any failure that could be attributed to this, but it seems to be the kind of thing that would be extremely hard to debug. So extend the struct definition so that we do allocate 192 bytes. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | ethernet: ucc_geth: set dev->max_mtu to 1518Rasmus Villemoes2020-12-221-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the buffers and registers are already set up appropriately for an MTU slightly above 1500, so we just need to expose this to the networking stack. AFAICT, there's no need to implement .ndo_change_mtu when the receive buffers are always set up to support the max_mtu. This fixes several warnings during boot on our mpc8309-board with an embedded mv88e6250 switch: mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0 ... mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4 ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead The last line explains what the DSA stack tries to do: achieving an MTU of 1500 on-the-wire requires that the master netdevice connected to the CPU port supports an MTU of 1500+the tagging overhead. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZEFlorian Fainelli2020-12-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | The driver is already allocating receive buffers of 2KiB and the Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201218173843.141046-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mvpp2: prs: fix PPPoE with ipv6 packet parseStefan Chulski2020-12-191-2/+3
| | | | | | | | | | | | | | | | | | | | | | Current PPPoE+IPv6 entry is jumping to 'next-hdr' field and not to 'DIP' field as done for IPv4. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Reported-by: Liron Himi <lironh@marvell.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608230266-22111-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mvpp2: Add TCAM entry to drop flow control pause framesStefan Chulski2020-12-192-1/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: Flow control frame used to pause GoP(MAC) was delivered to the CPU and created a load on the CPU. Since XOFF/XON frames are used only by MAC, these frames should be dropped inside MAC. Fix: According to 802.3-2012 - IEEE Standard for Ethernet pause frame has unique destination MAC address 01-80-C2-00-00-01. Add TCAM parser entry to track and drop pause frames by destination MAC. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608229817-21951-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: mvpp2: disable force link UP during port init procedureStefan Chulski2020-12-191-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | Force link UP can be enabled by bootloader during tftpboot and breaks NFS support. Force link UP disabled during port init procedure. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/1608216735-14501-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski2020-12-195-29/+23
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Incorrect loop in error path of nft_set_elem_expr_clone(), from Colin Ian King. 2) Missing xt_table_get_private_protected() to access table private data in x_tables, from Subash Abhinov Kasiviswanathan. 3) Possible oops in ipset hash type resize, from Vasily Averin. 4) Fix shift-out-of-bounds in ipset hash type, also from Vasily. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: ipset: fix shift-out-of-bounds in htable_bits() netfilter: ipset: fixes possible oops in mtype_resize netfilter: x_tables: Update remaining dereference to RCU netfilter: nftables: fix incorrect increment of loop counter ==================== Link: https://lore.kernel.org/r/20201218120409.3659-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | netfilter: ipset: fix shift-out-of-bounds in htable_bits()Vasily Averin2020-12-171-15/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | htable_bits() can call jhash_size(32) and trigger shift-out-of-bounds UBSAN: shift-out-of-bounds in net/netfilter/ipset/ip_set_hash_gen.h:151:6 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 8498 Comm: syz-executor519 Not tainted 5.10.0-rc7-next-20201208-syzkaller #0 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395 htable_bits net/netfilter/ipset/ip_set_hash_gen.h:151 [inline] hash_mac_create.cold+0x58/0x9b net/netfilter/ipset/ip_set_hash_gen.h:1524 ip_set_create+0x610/0x1380 net/netfilter/ipset/ip_set_core.c:1115 nfnetlink_rcv_msg+0xecc/0x1180 net/netfilter/nfnetlink.c:252 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:600 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2345 ___sys_sendmsg+0xf3/0x170 net/socket.c:2399 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2432 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This patch replaces htable_bits() by simple fls(hashsize - 1) call: it alone returns valid nbits both for round and non-round hashsizes. It is normal to set any nbits here because it is validated inside following htable_size() call which returns 0 for nbits>31. Fixes: 1feab10d7e6d("netfilter: ipset: Unified hash type generation") Reported-by: syzbot+d66bfadebca46cf61a2b@syzkaller.appspotmail.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | netfilter: ipset: fixes possible oops in mtype_resizeVasily Averin2020-12-171-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | currently mtype_resize() can cause oops t = ip_set_alloc(htable_size(htable_bits)); if (!t) { ret = -ENOMEM; goto out; } t->hregion = ip_set_alloc(ahash_sizeof_regions(htable_bits)); Increased htable_bits can force htable_size() to return 0. In own turn ip_set_alloc(0) returns not 0 but ZERO_SIZE_PTR, so follwoing access to t->hregion should trigger an OOPS. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | netfilter: x_tables: Update remaining dereference to RCUSubash Abhinov Kasiviswanathan2020-12-173-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the dereference to fetch the RCU pointer when holding the appropriate xtables lock. Reported-by: kernel test robot <lkp@intel.com> Fixes: cc00bcaa5899 ("netfilter: x_tables: Switch synchronization to RCU") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * | netfilter: nftables: fix incorrect increment of loop counterColin Ian King2020-12-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The intention of the err_expr cleanup path is to iterate over the allocated expr_array objects and free them, starting from i - 1 and working down to the start of the array. Currently the loop counter is being incremented instead of decremented and also the index i is being used instead of k, repeatedly destroying the same expr_array element. Fix this by decrementing k and using k as the index into expr_array. Addresses-Coverity: ("Infinite loop") Fixes: 8cfd9b0f8515 ("netfilter: nftables: generalize set expressions support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | | net/sched: sch_taprio: ensure to reset/destroy all child qdiscsDavide Caratti2020-12-191-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | taprio_graft() can insert a NULL element in the array of child qdiscs. As a consquence, taprio_reset() might not reset child qdiscs completely, and taprio_destroy() might leak resources. Fix it by ensuring that loops that iterate over q->qdiscs[] don't end when they find the first NULL item. Fixes: 44d4775ca518 ("net/sched: sch_taprio: reset child qdiscs before freeing them") Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/13edef6778fef03adc751582562fba4a13e06d6a.1608240532.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | Merge branch '40GbE' of ↵Jakub Kicinski2020-12-194-5/+16
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-12-17 Sylwester fixes an issue where PF was not properly being rebuilt following VF removal for i40e. Jakub Kicinski fixes a double release of rtnl_lock on iavf_lan_add_device() error for iavf. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: fix double-release of rtnl_lock i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFs ==================== Link: https://lore.kernel.org/r/20201217223418.3134992-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 06:23:43 +0100