summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kbuild: use $(obj)/ instead of $(src)/ for common pattern rulesMasahiro Yamada2024-05-093-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) Before changing the semantics of $(src) in the next commit, this commit replaces $(obj)/ with $(src)/ in pattern rules where the prerequisite might be a generated file. C, assembly, Rust, and DTS files are sometimes generated by tools, so they could be either generated files or real sources. The $(obj)/ prefix works for both cases with the help of VPATH. As mentioned above, $(obj) and $(src) are the same at this point, hence this commit has no functional change. I did not modify scripts/Makefile.userprogs because there is no use case where userspace C files are generated. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
* kbuild: do not add $(srctree) or $(objtree) to header search pathsMasahiro Yamada2024-05-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | scripts/Makefile.lib is included not only from scripts/Makefile.build but also from scripts/Makefile.{vmlinux,modfinal} for building generated C files. In scripts/Makefile.{vmlinux,modfinal}, $(obj) and $(src) are empty. Therefore, the header include paths: -I $(srctree)/$(src) -I $(objtree)/$(obj) ... become meaningless code: -I $(srctree)/ -I $(objtree)/ Add these paths only when 'obj' and 'src' are defined. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202404170634.BlqTaYA0-lkp@intel.com/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
* arch: use $(obj)/ instead of $(src)/ for preprocessed linker scriptsMasahiro Yamada2024-05-028-10/+10
| | | | | | | | These are generated files. Prefix them with $(obj)/ instead of $(src)/. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Helge Deller <deller@gmx.de> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
* kconfig: remove SYMBOL_NO_WRITE flagMasahiro Yamada2024-05-025-8/+4
| | | | | | | | | | | | | This flag is set to symbols that are not intended to be written to the .config file. Since commit b75b0a819af9 ("kconfig: change defconfig_list option to environment variable"), SYMBOL_NO_WRITE is only set to choices. Therefore, (sym->flags & SYMBOL_NO_WRITE) is equivalent to sym_is_choice(sym). This flag is no longer necessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* kbuild: Remove support for Clang's ThinLTO cachingNathan Chancellor2024-05-021-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is an issue in clang's ThinLTO caching (enabled for the kernel via '--thinlto-cache-dir') with .incbin, which the kernel occasionally uses to include data within the kernel, such as the .config file for /proc/config.gz. For example, when changing the .config and rebuilding vmlinux, the copy of .config in vmlinux does not match the copy of .config in the build folder: $ echo 'CONFIG_LTO_NONE=n CONFIG_LTO_CLANG_THIN=y CONFIG_IKCONFIG=y CONFIG_HEADERS_INSTALL=y' >kernel/configs/repro.config $ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 clean defconfig repro.config vmlinux ... $ grep CONFIG_HEADERS_INSTALL .config CONFIG_HEADERS_INSTALL=y $ scripts/extract-ikconfig vmlinux | grep CONFIG_HEADERS_INSTALL CONFIG_HEADERS_INSTALL=y $ scripts/config -d HEADERS_INSTALL $ make -kj"$(nproc)" ARCH=x86_64 LLVM=1 vmlinux ... UPD kernel/config_data GZIP kernel/config_data.gz CC kernel/configs.o ... LD vmlinux ... $ grep CONFIG_HEADERS_INSTALL .config # CONFIG_HEADERS_INSTALL is not set $ scripts/extract-ikconfig vmlinux | grep CONFIG_HEADERS_INSTALL CONFIG_HEADERS_INSTALL=y Without '--thinlto-cache-dir' or when using full LTO, this issue does not occur. Benchmarking incremental builds on a few different machines with and without the cache shows a 20% increase in incremental build time without the cache when measured by touching init/main.c and running 'make all'. ARCH=arm64 defconfig + CONFIG_LTO_CLANG_THIN=y on an arm64 host: Benchmark 1: With ThinLTO cache Time (mean ± σ): 56.347 s ± 0.163 s [User: 83.768 s, System: 24.661 s] Range (min … max): 56.109 s … 56.594 s 10 runs Benchmark 2: Without ThinLTO cache Time (mean ± σ): 67.740 s ± 0.479 s [User: 718.458 s, System: 31.797 s] Range (min … max): 67.059 s … 68.556 s 10 runs Summary With ThinLTO cache ran 1.20 ± 0.01 times faster than Without ThinLTO cache ARCH=x86_64 defconfig + CONFIG_LTO_CLANG_THIN=y on an x86_64 host: Benchmark 1: With ThinLTO cache Time (mean ± σ): 85.772 s ± 0.252 s [User: 91.505 s, System: 8.408 s] Range (min … max): 85.447 s … 86.244 s 10 runs Benchmark 2: Without ThinLTO cache Time (mean ± σ): 103.833 s ± 0.288 s [User: 232.058 s, System: 8.569 s] Range (min … max): 103.286 s … 104.124 s 10 runs Summary With ThinLTO cache ran 1.21 ± 0.00 times faster than Without ThinLTO cache While it is unfortunate to take this performance improvement off the table, correctness is more important. If/when this is fixed in LLVM, it can potentially be brought back in a conditional manner. Alternatively, a developer can just disable LTO if doing incremental compiles quickly is important, as a full compile cycle can still take over a minute even with the cache and it is unlikely that LTO will result in functional differences for a kernel change. Cc: stable@vger.kernel.org Fixes: dc5723b02e52 ("kbuild: add support for Clang LTO") Reported-by: Yifan Hong <elsk@google.com> Closes: https://github.com/ClangBuiltLinux/linux/issues/2021 Reported-by: Masami Hiramatsu <mhiramat@kernel.org> Closes: https://lore.kernel.org/r/20220327115526.cc4b0ff55fc53c97683c3e4d@kernel.org/ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* kconfig: remove 'optional' property supportMasahiro Yamada2024-05-0215-78/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'choice' statement is primarily used to exclusively select one option, but the 'optional' property allows all entries to be disabled. In the following example, both A and B can be disabled simultaneously: choice prompt "choose A, B, or nothing" optional config A bool "A" config B bool "B" endchoice You can achieve the equivalent outcome by other means. A common solution is to add another option to guard the choice block. In the following example, you can set ENABLE_A_B_CHOICE=n to disable the entire choice block: choice prompt "choose A or B" depends on ENABLE_A_B_CHOICE config A bool "A" config B bool "B" endchoice Another approach is to insert one more entry: choice prompt "choose A, B, or disable both" config A bool "A" config B bool "B" config DISABLE_A_AND_B bool "choose this to disable both A and B" endchoice Some real examples are DEBUG_INFO_NONE, INITRAMFS_COMPRESSION_NONE, LTO_NONE, etc. The 'optional' property is even more unnecessary for a tristate choice. Without the 'optional' property, you can disable A and B; you can set 'm' in the choice prompt, and disable A and B individually: choice prompt "choose one built-in or make them modular" config A tristate "A" config B tristate "B" endchoice In conclusion, the 'optional' property was unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
* sh: Convert the last use of 'optional' property in KconfigMasahiro Yamada2024-05-0220-1/+24
| | | | | | | | | | | | | | | | | | | | | | | | The 'choice' statement is primarily used to exclusively select one option, but the 'optional' property allows all entries to be disabled. This feature is rarely used. In fact, it is only used in arch/sh/Kconfig because the equivalent outcome can be achieved by inserting one more entry. The 'optional' property support will be removed from Kconfig. This commit replaces the 'optional' property with a dummy option, CMDLINE_FROM_BOOTLOADER, as seen in some other architectures. Note: The 'default CMDLINE_OVERWRITE' statement does not work as intended in combination with 'optional'. If neither CONFIG_CMDLINE_OVERWRITE nor CONFIG_CMDLINE_EXTEND is specified in a defconfig file, both of them are disabled. This is a bug. To maintain the current behavior, I added CONFIG_CMDLINE_FROM_BOOTLOADER=y to those defconfig files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
* kconfig: remove SYMBOL_CHOICE flagMasahiro Yamada2024-05-026-9/+6
| | | | | | | | | | | | | All symbols except choices have a name. Previously, choices were allowed to have a name, but commit c83f020973bc ("kconfig: remove named choice support") eliminated that possibility. Now, it is easy to distinguish choices from normal symbols; if the name is NULL, it is a choice. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
* kbuild: buildtar: remove warning for the default caseMasahiro Yamada2024-05-021-11/+1
| | | | | | | | | | | | | | Given KBUILD_IMAGE properly set in arch/*/Makefile, the default case should work in most scenarios. The only oddity is the naming of the copy destination, vmlinux-kbuild-${KERNELRELEASE}. Let's rename it to vmlinuz-${KERNELRELEASE} because the kernel is often compressed. Remove the warning to avoid unnecessary patch submissions when the default case suffices. Remove the x86 case, which is now equivalent to the default. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org>
* kconfig: remove unneeded if-conditional in conf_choice()Masahiro Yamada2024-05-021-3/+2
| | | | | | | | All symbols except choices have a name. child->sym->name never becomes NULL inside choice blocks. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* kconfig: use menu_for_each_entry() to traverse menu treeMasahiro Yamada2024-05-022-35/+6
| | | | | | | Use menu_for_each_entry() to traverse the menu tree instead of implementing similar logic in each function. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* kconfig: add menu_next() function and menu_for_each(_sub)_entry macrosMasahiro Yamada2024-05-022-0/+26
| | | | | | | | | | | | | | | | | | Several functions require traversing menu entries sequentially. This commit introduces some helpers to simplify such operations. The menu_next() function facilitates depth-first traversal: 1. Descend to the child level if the current menu has one 2. Move to the next sibling at the same level if available 3. Ascend to the parent level if there is no more child or sibling The menu_for_each_sub_entry() macro iterates over all submenu entries using depth-first traverse. The menu_for_each_entry() macro is the same, but over all menu entries. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* vmlinux: Avoid weak reference to notes sectionArd Biesheuvel2024-05-022-4/+4
| | | | | | | | | | | | | | Weak references are references that are permitted to remain unsatisfied in the final link. This means they cannot be implemented using place relative relocations, resulting in GOT entries when using position independent code generation. The notes section should always exist, so the weak annotations can be omitted. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* kallsyms: Avoid weak references for kallsyms symbolsArd Biesheuvel2024-05-023-24/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kallsyms is a directory of all the symbols in the vmlinux binary, and so creating it is somewhat of a chicken-and-egg problem, as its non-zero size affects the layout of the binary, and therefore the values of the symbols. For this reason, the kernel is linked more than once, and the first pass does not include any kallsyms data at all. For the linker to accept this, the symbol declarations describing the kallsyms metadata are emitted as having weak linkage, so they can remain unsatisfied. During the subsequent passes, the weak references are satisfied by the kallsyms metadata that was constructed based on information gathered from the preceding passes. Weak references lead to somewhat worse codegen, because taking their address may need to produce NULL (if the reference was unsatisfied), and this is not usually supported by RIP or PC relative symbol references. Given that these references are ultimately always satisfied in the final link, let's drop the weak annotation, and instead, provide fallback definitions in the linker script that are only emitted if an unsatisfied reference exists. While at it, drop the FRV specific annotation that these symbols reside in .rodata - FRV is long gone. Tested-by: Nick Desaulniers <ndesaulniers@google.com> # Boot Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20230504174320.3930345-1-ardb%40kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* kbuild: buildtar: add comments about inconsistent package generationMasahiro Yamada2024-05-021-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | scripts/package/buildtar checks some kernel packages, and copies the first image found. This may potentially produce an inconsistent (and possibly wrong) package. For instance, the for-loop for arm64 checks Image.{bz2,gz,lz4,lzma,lzo}, and vmlinuz.efi, then copies the first image found, which might be a stale image created in a previous build. When CONFIG_EFI_ZBOOT is enabled in the pristine source tree, 'make ARCH=arm64 tar-pkg' will build and copy vmlinuz.efi. This is the expected behavior. If you build the kernel with CONFIG_EFI_ZBOOT disabled, Image.gz will be created, which will remain in the tree until you run 'make clean'. Even if CONFIG_EFI_ZBOOT is turned on later, 'make ARCH=arm64 tar-pkg' will copy stale Image.gz instead of the latest vmlinuz.efi, as Image.gz takes precedence over vmlinuz.efi. In summary, the code "[ -f ... ] && cp" does not consistently produce the desired outcome. Other packaging targets are deterministic; deb-pkg and rpm-pkg copies ${KBUILD_IMAGE}, which is determined by CONFIG options. I removed [ -f ... ] checks from x86, alpha, parisc, and the default because they have a single kernel image to copy. If it is missing, it should be an error. I did not modify the code for mips, arm64, riscv. Instead, I left some comments. Eventually, someone may fix the code, or at the very least, it may discourage the copy-pasting of incorrect code to another architecture. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
* dt-bindings: kbuild: Add separate target/dependency for processed-schema.jsonRob Herring2024-05-023-13/+20
| | | | | | | | | | | | | | | | | | | | Running dtbs_check and dt_compatible_check targets really only depend on processed-schema.json, but the dependency is 'dt_binding_check'. That was sort worked around with the CHECK_DT_BINDING variable in order to skip some of the work that 'dt_binding_check' does. It still runs the full checks of the schemas which is not necessary and adds 10s of seconds to the build time. That's significant when checking only a few DTBs and with recent changes that have improved the validation time by 6-7x. Add a new target, dt_binding_schema, which just builds processed-schema.json and can be used as the dependency for other targets. The scripts_dtc dependency isn't needed either as the examples aren't built for it. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* dt-bindings: kbuild: Split targets out to separate rulesRob Herring2024-04-231-11/+14
| | | | | | | | | | | | | | | | | Masahiro pointed out the use of if_changed_rule is incorrect and command line changes are not correctly accounted for. To fix this, split up the DT binding validation target, dt_binding_check, into multiple rules for each step: yamllint, schema validtion with meta-schema, and building the processed schema. One change in behavior is the yamllint or schema validation will be re-run again when there are warnings present. Reported-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/all/20220817152027.16928-1-masahiroy@kernel.org/ Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* dt-bindings: kbuild: Simplify examples target patsubstRob Herring2024-04-231-3/+3
| | | | | | | | | | | | Instead of stripping off the $(srctree) multiple times do it once up front, but keep the src/obj path as it is going to be needed in subsequent commit. Rename the variable to CHK_DT_EXAMPLES to better reflect what it contains. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* scripts/unifdef: avoid constexpr keywordArnd Bergmann2024-04-221-6/+6
| | | | | | | | | | | | | | | | | | | Starting with c23, 'constexpr' is a keyword in C like in C++ and cannot be used as an identifier: scripts/unifdef.c:206:25: error: 'constexpr' can only be used in variable declarations 206 | static bool constexpr; /* constant #if expression */ | ^ scripts/unifdef.c:880:13: error: expected identifier or '(' 880 | constexpr = false; | ^ Rename this instance to allow changing to C23 at some point in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-By: Tony Finch <dot@dotat.at> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* parisc: vdso: remove unused C build rule in vdso32/MakefileMasahiro Yamada2024-04-221-6/+1
| | | | | | | | | | | The build rule for C is unused because 'obj-cvdso32' is not defined in this Makefile. If you add a C file into arch/parisc/kernel/vdso32/ in the future, you can revert this commit. The kernel does not keep unused code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Helge Deller <deller@gmx.de>
* Linux 6.9-rc5v6.9-rc5Linus Torvalds2024-04-211-1/+1
|
* Merge tag 'char-misc-6.9-rc5' of ↵Linus Torvalds2024-04-2111-80/+104
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small char/misc and other driver fixes for 6.9-rc5. Included in here are the following: - binder driver fix for reported problem - speakup crash fix - mei driver fixes for reported problems - comdei driver fix - interconnect driver fixes - rtsx driver fix - peci.h kernel doc fix All of these have been in linux-next for over a week with no reported problems" * tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: peci: linux/peci.h: fix Excess kernel-doc description warning binder: check offset alignment in binder_get_object() comedi: vmk80xx: fix incomplete endpoint checking mei: vsc: Unregister interrupt handler for system suspend Revert "mei: vsc: Call wake_up() in the threaded IRQ handler" misc: rtsx: Fix rts5264 driver status incorrect when card removed mei: me: disable RPL-S on SPS and IGN firmwares speakup: Avoid crash on very long word interconnect: Don't access req_list while it's being manipulated interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
| * peci: linux/peci.h: fix Excess kernel-doc description warningRandy Dunlap2024-04-111-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the @controller: line to prevent the kernel-doc warning: include/linux/peci.h:84: warning: Excess struct member 'controller' description in 'peci_device' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Iwona Winiarska <iwona.winiarska@intel.com> Cc: openbmc@lists.ozlabs.org Reviewed-by: Iwona Winiarska <iwona.winiarska@intel.com> Fixes: 6523d3b2ffa2 ("peci: Add core infrastructure") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240329182910.29495-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * binder: check offset alignment in binder_get_object()Carlos Llamas2024-04-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6d98eb95b450 ("binder: avoid potential data leakage when copying txn") introduced changes to how binder objects are copied. In doing so, it unintentionally removed an offset alignment check done through calls to binder_alloc_copy_from_buffer() -> check_buffer(). These calls were replaced in binder_get_object() with copy_from_user(), so now an explicit offset alignment check is needed here. This avoids later complications when unwinding the objects gets harder. It is worth noting this check existed prior to commit 7a67a39320df ("binder: add function to copy binder object from buffer"), likely removed due to redundancy at the time. Fixes: 6d98eb95b450 ("binder: avoid potential data leakage when copying txn") Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20240330190115.1877819-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * comedi: vmk80xx: fix incomplete endpoint checkingNikita Zhandarovich2024-04-111-23/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While vmk80xx does have endpoint checking implemented, some things can fall through the cracks. Depending on the hardware model, URBs can have either bulk or interrupt type, and current version of vmk80xx_find_usb_endpoints() function does not take that fully into account. While this warning does not seem to be too harmful, at the very least it will crash systems with 'panic_on_warn' set on them. Fix the issue found by Syzkaller [1] by somewhat simplifying the endpoint checking process with usb_find_common_endpoints() and ensuring that only expected endpoint types are present. This patch has not been tested on real hardware. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59 vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline] vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818 comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067 usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399 ... Similar issue also found by Syzkaller: Link: https://syzkaller.appspot.com/bug?extid=5205eb2f17de3e01946e Reported-and-tested-by: syzbot+5f29dc6a889fc42bd896@syzkaller.appspotmail.com Cc: stable <stable@kernel.org> Fixes: 49253d542cc0 ("staging: comedi: vmk80xx: factor out usb endpoint detection") Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://lore.kernel.org/r/20240408171633.31649-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mei: vsc: Unregister interrupt handler for system suspendSakari Ailus2024-04-113-26/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unregister the MEI VSC interrupt handler before system suspend and re-register it at system resume time. This mirrors implementation of other MEI devices. This patch fixes the bug that causes continuous stream of MEI VSC errors after system resume. Fixes: 386a766c4169 ("mei: Add MEI hardware support for IVSC device") Cc: stable@vger.kernel.org # for 6.8 Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Wentong Wu <wentong.wu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240403051341.3534650-2-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"Sakari Ailus2024-04-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 058a38acba15fd8e7b262ec6e17c4204cb15f984. It's not necessary to avoid a spinlock, a sleeping lock on PREEMPT_RT, in an interrupt handler as the interrupt handler itself would be called in a process context if PREEMPT_RT is enabled. So revert the patch. Cc: stable@vger.kernel.org # for 6.8 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240403051341.3534650-1-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * misc: rtsx: Fix rts5264 driver status incorrect when card removedRicky Wu2024-04-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | rts5264 driver not clean express link error and set EXTRA_CAPS_SD_EXPRESS capability back when card removed Fixes: 6a511c9b3a0d ("misc: rtsx: add to support new card reader rts5264") Cc: stable <stable@kernel.org> Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20240314065113.5962-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * mei: me: disable RPL-S on SPS and IGN firmwaresAlexander Usyskin2024-04-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Extend the quirk to disable MEI interface on Intel PCH Ignition (IGN) and SPS firmwares for RPL-S devices. These firmwares do not support the MEI protocol. Fixes: 3ed8c7d39cfe ("mei: me: add raptor lake point S DID") Cc: stable@vger.kernel.org Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240312051958.118478-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'icc-6.9-rc2' of ↵Greg Kroah-Hartman2024-04-112-26/+8
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-work-linus Georgi writes: interconnect fixes for v6.9-rc Here are fixes for two reported issues. One of them is a fix for a driver that tries to access a non-existent resource which prints a warning message during boot. The other one is fixing a race condition in the core framework where one struct member has been left unprotected by mutex. - interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM - interconnect: Don't access req_list while it's being manipulated Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: Don't access req_list while it's being manipulated interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
| | * interconnect: Don't access req_list while it's being manipulatedMike Tipton2024-03-141-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The icc_lock mutex was split into separate icc_lock and icc_bw_lock mutexes in [1] to avoid lockdep splats. However, this didn't adequately protect access to icc_node::req_list. The icc_set_bw() function will eventually iterate over req_list while only holding icc_bw_lock, but req_list can be modified while only holding icc_lock. This causes races between icc_set_bw(), of_icc_get(), and icc_put(). Example A: CPU0 CPU1 ---- ---- icc_set_bw(path_a) mutex_lock(&icc_bw_lock); icc_put(path_b) mutex_lock(&icc_lock); aggregate_requests() hlist_for_each_entry(r, ... hlist_del(... <r = invalid pointer> Example B: CPU0 CPU1 ---- ---- icc_set_bw(path_a) mutex_lock(&icc_bw_lock); path_b = of_icc_get() of_icc_get_by_index() mutex_lock(&icc_lock); path_find() path_init() aggregate_requests() hlist_for_each_entry(r, ... hlist_add_head(... <r = invalid pointer> Fix this by ensuring icc_bw_lock is always held before manipulating icc_node::req_list. The additional places icc_bw_lock is held don't perform any memory allocations, so we should still be safe from the original lockdep splats that motivated the separate locks. [1] commit af42269c3523 ("interconnect: Fix locking for runpm vs reclaim") Signed-off-by: Mike Tipton <quic_mdtipton@quicinc.com> Fixes: af42269c3523 ("interconnect: Fix locking for runpm vs reclaim") Reviewed-by: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20240305225652.22872-1-quic_mdtipton@quicinc.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
| | * interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCMKonrad Dybcio2024-03-141-26/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Booting the kernel on X1E results in a message like: [ 2.561524] qnoc-x1e80100 interconnect-0: ACV_PERF could not find RPMh address And indeed, taking a look at cmd-db, no such BCM exists. Remove it. Fixes: 9f196772841e ("interconnect: qcom: Add X1E80100 interconnect provider driver") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Mike Tipton <quic_mdtipton@quicinc.com> Link: https://lore.kernel.org/r/20240302-topic-faux_bcm_x1e-v1-1-c40fab7c4bc5@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
| * | speakup: Avoid crash on very long wordSamuel Thibault2024-04-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case a console is set up really large and contains a really long word (> 256 characters), we have to stop before the length of the word buffer. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Fixes: c6e3fd22cd538 ("Staging: add speakup to the staging directory") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240323164843.1426997-1-samuel.thibault@ens-lyon.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'driver-core-6.9-rc5' of ↵Linus Torvalds2024-04-212-1/+3
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull kernfs bugfix and documentation update from Greg KH: "Here are two changes for 6.9-rc5 that deal with "driver core" stuff, that do the following: - sysfs reference leak fix - embargoed-hardware-issues.rst update for Power Both of these have been in linux-next for over a week with no reported issues" * tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation: embargoed-hardware-issues.rst: Add myself for Power fs: sysfs: Fix reference leak in sysfs_break_active_protection()
| * | | Documentation: embargoed-hardware-issues.rst: Add myself for PowerMichael Ellerman2024-04-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unfortunately Anton has left IBM. Add myself as the contact for Power, until someone else volunteers. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20240322103840.668746-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | fs: sysfs: Fix reference leak in sysfs_break_active_protection()Alan Stern2024-04-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sysfs_break_active_protection() routine has an obvious reference leak in its error path. If the call to kernfs_find_and_get() fails then kn will be NULL, so the companion sysfs_unbreak_active_protection() routine won't get called (and would only cause an access violation by trying to dereference kn->parent if it was called). As a result, the reference to kobj acquired at the start of the function will never be released. Fix the leak by adding an explicit kobject_put() call when kn is NULL. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 2afc9166f79b ("scsi: sysfs: Introduce sysfs_{un,}break_active_protection()") Cc: Bart Van Assche <bvanassche@acm.org> Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/8a4d3f0f-c5e3-4b70-a188-0ca433f9e6f9@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge tag 'tty-6.9-rc5' of ↵Linus Torvalds2024-04-2112-34/+81
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.9-rc5 that resolve a bunch of reported problems. Included in here are: - MAINTAINERS and .mailmap update for Richard Genoud - serial core regression fixes from 6.9-rc1 changes - pci id cleanups - serial core crash fix - stm32 driver fixes - 8250 driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: stm32: Reset .throttled state in .startup() serial: stm32: Return IRQ_NONE in the ISR if no handling happend serial: core: Fix missing shutdown and startup for serial base port serial: core: Clearing the circular buffer before NULLifying it MAINTAINERS: mailmap: update Richard Genoud's email address serial/pmac_zilog: Remove flawed mitigation for rx irq flood serial: 8250_pci: Remove redundant PCI IDs serial: core: Fix regression when runtime PM is not enabled serial: mxs-auart: add spinlock around changing cts state serial: 8250_dw: Revert: Do not reclock if already at correct rate serial: 8250_lpc18xx: disable clks on error in probe()
| * | | | serial: stm32: Reset .throttled state in .startup()Uwe Kleine-König2024-04-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an UART is opened that still has .throttled set from a previous open, the RX interrupt is enabled but the irq handler doesn't consider it. This easily results in a stuck irq with the effect to occupy the CPU in a tight loop. So reset the throttle state in .startup() to ensure that RX irqs are handled. Fixes: d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: stm32: Return IRQ_NONE in the ISR if no handling happendUwe Kleine-König2024-04-171-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If there is a stuck irq that the handler doesn't address, returning IRQ_HANDLED unconditionally makes it impossible for the irq core to detect the problem and disable the irq. So only return IRQ_HANDLED if an event was handled. A stuck irq is still problematic, but with this change at least it only makes the UART nonfunctional instead of occupying the (usually only) CPU by 100% and so stall the whole machine. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: core: Fix missing shutdown and startup for serial base portTony Lindgren2024-04-113-3/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are seeing start_tx being called after port shutdown as noted by Jiri. This happens because we are missing the startup and shutdown related functions for the serial base port. Let's fix the issue by adding startup and shutdown functions for the serial base port to block tx flushing for the serial base port when the port is not in use. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Cc: stable <stable@kernel.org> Reported-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240411055848.38190-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: core: Clearing the circular buffer before NULLifying itAndy Shevchenko2024-04-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The circular buffer is NULLified in uart_tty_port_shutdown() under the spin lock. However, the PM or other timer based callbacks may still trigger after this event without knowning that buffer pointer is not valid. Since the serial code is a bit inconsistent in checking the buffer state (some rely on the head-tail positions, some on the buffer pointer), it's better to have both aligned, i.e. buffer pointer to be NULL and head-tail possitions to be the same, meaning it's empty. This will prevent asynchronous calls to dereference NULL pointer as reported recently in 8250 case: BUG: kernel NULL pointer dereference, address: 00000cf5 Workqueue: pm pm_runtime_work EIP: serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) ... ? serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) __start_tx (drivers/tty/serial/8250/8250_port.c:1551) serial8250_start_tx (drivers/tty/serial/8250/8250_port.c:1654) serial_port_runtime_suspend (include/linux/serial_core.h:667 drivers/tty/serial/serial_port.c:63) __rpm_callback (drivers/base/power/runtime.c:393) ? serial_port_remove (drivers/tty/serial/serial_port.c:50) rpm_suspend (drivers/base/power/runtime.c:447) The proposed change will prevent ->start_tx() to be called during suspend on shut down port. Fixes: 43066e32227e ("serial: port: Don't suspend if the port is still busy") Cc: stable <stable@kernel.org> Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202404031607.2e92eebe-lkp@intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240404150034.41648-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | MAINTAINERS: mailmap: update Richard Genoud's email addressRichard Genoud2024-04-093-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm working now at bootlin, so I'll use my bootlin address for kernel development from now on. Update also the yaml file for atmel-serial accordingly. Signed-off-by: Richard Genoud <richard.genoud@bootlin.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20240408101329.9448-1-richard.genoud@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial/pmac_zilog: Remove flawed mitigation for rx irq floodFinn Thain2024-04-091-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mitigation was intended to stop the irq completely. That may be better than a hard lock-up but it turns out that you get a crash anyway if you're using pmac_zilog as a serial console: ttyPZ0: pmz: rx irq flood ! BUG: spinlock recursion on CPU#0, swapper/0 That's because the pr_err() call in pmz_receive_chars() results in pmz_console_write() attempting to lock a spinlock already locked in pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal BUG splat. The spinlock in question is the one in struct uart_port. Even when it's not fatal, the serial port rx function ceases to work. Also, the iteration limit doesn't play nicely with QEMU, as can be seen in the bug report linked below. A web search for other reports of the error message "pmz: rx irq flood" didn't produce anything. So I don't think this code is needed any more. Remove it. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@kernel.org Cc: linux-m68k@lists.linux-m68k.org Link: https://github.com/vivier/qemu-m68k/issues/44 Link: https://lore.kernel.org/all/1078874617.9746.36.camel@gaston/ Acked-by: Michael Ellerman <mpe@ellerman.id.au> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@kernel.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/e853cf2c762f23101cd2ddec0cc0c2be0e72685f.1712568223.git.fthain@linux-m68k.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: 8250_pci: Remove redundant PCI IDsAndy Shevchenko2024-04-091-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver complains that PCI IDs are not needed for some of the LAVA cards: [ 0.297252] serial 0000:04:00.0: Redundant entry in serial pci_table. [ 0.297252] Please send the output of lspci -vv, this [ 0.297252] message (0x1407,0x0120,0x0000,0x0000), the [ 0.297252] manufacturer and name of serial board or [ 0.297252] modem board to <linux-serial@vger.kernel.org>. Do as suggested. Reported-by: Jimmy A <jimand04@hotmail.com> Closes: https://lore.kernel.org/r/VI1P194MB052751BE157EFE9CEAB75725CE362@VI1P194MB0527.EURP194.PROD.OUTLOOK.COM Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240403224152.945099-1-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: core: Fix regression when runtime PM is not enabledTony Lindgren2024-04-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 45a3a8ef8129 ("serial: core: Revert checks for tx runtime PM state") caused a regression for Sun Ultra 60 for the sunsab driver as reported by Nick Bowler <nbowler@draconx.ca>. We need to add back the check runtime PM enabled state for serial port controller device, I wrongly assumed earlier we could just remove it. Fixes: 45a3a8ef8129 ("serial: core: Revert checks for tx runtime PM state") Cc: stable <stable@kernel.org> Reported-by: Nick Bowler <nbowler@draconx.ca> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240325071649.27040-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: mxs-auart: add spinlock around changing cts stateEmil Kronborg2024-04-091-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...) Cc: stable@vger.kernel.org Fixes: 4d90bb147ef6 ("serial: core: Document and assert lock requirements for irq helpers") Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com> Link: https://lore.kernel.org/r/20240320121530.11348-1-emil.kronborg@protonmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: 8250_dw: Revert: Do not reclock if already at correct rateHans de Goede2024-04-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e5d6bd25f93d ("serial: 8250_dw: Do not reclock if already at correct rate") breaks the dw UARTs on Intel Bay Trail (BYT) and Cherry Trail (CHT) SoCs. Before this change the RTL8732BS Bluetooth HCI which is found connected over the dw UART on both BYT and CHT boards works properly: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_config-OBDA8723.bin Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508 Bluetooth: hci0: RTL: fw version 0x365d462e where as after this change probing it fails: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_config-OBDA8723.bin Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508 Bluetooth: hci0: command 0xfc20 tx timeout Bluetooth: hci0: RTL: download fw command failed (-110) Revert the changes to fix this regression. Fixes: e5d6bd25f93d ("serial: 8250_dw: Do not reclock if already at correct rate") Cc: stable@vger.kernel.org Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Peter Collingbourne <pcc@google.com> Link: https://lore.kernel.org/r/20240317214123.34482-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: 8250_lpc18xx: disable clks on error in probe()Dan Carpenter2024-04-091-1/+1
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Goto the clean up path to clean up a couple clocks before returning on this error path. Fixes: 0087b9e694ee ("serial: 8250_lpc18xx: Switch to use uart_read_port_properties()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/92646c10-e0b5-4117-a9ac-ce9987d33ce3@moroto.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge tag 'usb-6.9-rc5' of ↵Linus Torvalds2024-04-2119-64/+147
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for 6.9-rc5. Included in here are: - MAINTAINER file update for invalid email address - usb-serial device id updates - typec driver fixes - thunderbolt / usb4 driver fixes - usb core shutdown fixes - cdc-wdm driver revert for reported problem in -rc1 - usb gadget driver fixes - xhci driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: serial: option: add Telit FN920C04 rmnet compositions usb: dwc3: ep0: Don't reset resource alloc flag Revert "usb: cdc-wdm: close race between read and workqueue" USB: serial: option: add Rolling RW101-GL and RW135-GL support USB: serial: option: add Lonsung U8300/U9300 product USB: serial: option: add support for Fibocom FM650/FG650 USB: serial: option: support Quectel EM060K sub-models USB: serial: option: add Fibocom FM135-GL variants usb: misc: onboard_usb_hub: Disable the USB hub clock on failure thunderbolt: Avoid notify PM core about runtime PM resume thunderbolt: Fix wake configurations after device unplug usb: dwc2: host: Fix dereference issue in DDMA completion flow. usb: typec: mux: it5205: Fix ChipID value typo MAINTAINERS: Drop Li Yang as their email address stopped working usb: gadget: fsl: Initialize udc before using it usb: Disable USB3 LPM at shutdown usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error usb: typec: tcpm: Correct the PDO counting in pd_set usb: gadget: functionfs: Wait for fences before enqueueing DMABUF usb: gadget: functionfs: Fix inverted DMA fence direction ...
| * \ \ \ Merge tag 'usb-serial-6.9-rc5' of ↵Greg Kroah-Hartman2024-04-191-0/+40
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.9-rc5 Here are some new modem device ids for 6.9-rc5. All have been in linux-next with no reported issues. * tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN920C04 rmnet compositions USB: serial: option: add Rolling RW101-GL and RW135-GL support USB: serial: option: add Lonsung U8300/U9300 product USB: serial: option: add support for Fibocom FM650/FG650 USB: serial: option: support Quectel EM060K sub-models USB: serial: option: add Fibocom FM135-GL variants
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 01:43:35 +0100