summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/microwatt: Add mmu bits to device treeJoel Stanley2022-05-221-0/+2
| | | | | | | | | | | | | | | | | | In commit 5402e239d09f ("powerpc/64s: Get LPID bit width from device tree") the kernel tried to determine the pid and lpid bits from the device tree. If they are not found, there is a fallback, but Microwatt wasn't covered as it has the unusual configuration of being both !HV and bare metal. Set the values in the device tree to avoid having to add a special case. The lpid value is the only one required, but add both for completeness. Fixes: 5402e239d09f ("powerpc/64s: Get LPID bit width from device tree") Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220519125706.593532-1-joel@jms.id.au
* powerpc/powernv/flash: Check OPAL flash calls exist before usingVasant Hegde2022-05-221-0/+4
| | | | | | | | | | | Currently only FSP based powernv systems supports firmware update interfaces. Hence check that the token OPAL_FLASH_VALIDATE exists before initalising the flash driver. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210914101630.30613-1-hegdevasant@linux.vnet.ibm.com
* powerpc/powermac: constify device_node in of_irq_parse_oldworld()Krzysztof Kozlowski2022-05-222-4/+4
| | | | | | | | | | | | The of_irq_parse_oldworld() does not modify passed device_node so make it a pointer to const for safety. Drop the extern while modifying the line. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210924105653.46963-2-krzysztof.kozlowski@canonical.com
* powerpc/powermac: add missing g5_phy_disable_cpu1() declarationKrzysztof Kozlowski2022-05-222-2/+2
| | | | | | | | | | | | | g5_phy_disable_cpu1() is used outside of platforms/powermac/feature.c, so it should have a declaration to fix W=1 warning: arch/powerpc/platforms/powermac/feature.c:1533:6: error: no previous prototype for ‘g5_phy_disable_cpu1’ [-Werror=missing-prototypes] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210924105653.46963-1-krzysztof.kozlowski@canonical.com
* selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"Colin Ian King2022-05-221-3/+3
| | | | | | | | | There are a few spelling mistakes in error messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220319232025.22067-1-colin.i.king@gmail.com
* powerpc: Enable the DAWR on POWER9 DD2.3 and aboveReza Arbab2022-05-224-14/+52
| | | | | | | | | | | | | | | | | The hardware bug in POWER9 preventing use of the DAWR was fixed in DD2.3. Set the CPU_FTR_DAWR feature bit on these newer systems to start using it again, and update the documentation accordingly. The CPU features for DD2.3 are currently determined by "DD2.2 or later" logic. In adding DD2.3 as a discrete case for the first time here, I'm carrying the quirks of DD2.2 forward to keep all behavior outside of this DAWR change the same. This leaves the assessment and potential removal of those quirks on DD2.3 for later. Signed-off-by: Reza Arbab <arbab@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220503170152.23412-1-arbab@linux.ibm.com
* powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS maskMichael Ellerman2022-05-221-2/+4
| | | | | | | | | | | | | | | | CPU_FTRS_POWER10 is missing from the CPU_FTRS_ALWAYS mask. Currently that doesn't cause any bug, because it is a superset of the POWER9 mask, which the exception of CPU_FTR_TM, but POWER7 doesn't have CPU_FTR_TM, so CPU_FTR_TM is not in the ALWAYS mask to begin with. However for consistency, and to be robust against future changes, it should be included in the ALWAYS mask. Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220519122205.746276-2-mpe@ellerman.id.au
* powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS maskMichael Ellerman2022-05-221-2/+2
| | | | | | | | | | | | | | | | | CPU_FTRS_POWER9_DD2_2 is missing from CPU_FTRS_ALWAYS. That doesn't cause any bug, because CPU_FTRS_POWER9_DD2_2 adds new bits that don't appear in other values, so when anded with the other masks the result is the same. But for consistency we should have all values in the CPU_FTRS_ALWAYS mask, so that the logic is robust against the values being changed in future. Fixes: b5af4f279323 ("powerpc: Add CPU feature bits for TM bug workarounds on POWER9 v2.2") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220519122205.746276-1-mpe@ellerman.id.au
* powerpc: Fix all occurences of "the the"Michael Ellerman2022-05-2214-14/+14
| | | | | | | | Rather than waiting for the bots to fix these one-by-one, fix all occurences of "the the" throughout arch/powerpc. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220518142629.513007-1-mpe@ellerman.id.au
* selftests/powerpc/pmu/ebb: remove fixed_instruction.SMadhavan Srinivasan2022-05-221-43/+0
| | | | | | | | | | | | | | | Commit 3752e453f6ba ("selftests/powerpc: Add tests of PMU EBBs") added selftest testcases to verify EBB interface. instruction_count_test.c testcase needs a fixed loop function to count overhead. Instead of using the thirty_two_instruction_loop() in fixed_instruction_loop.S in ebb folder, file is linked with thirty_two_instruction_loop() in loop.S from top folder. Since fixed_instruction_loop.S not used, patch removes the file. Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220322045638.10443-1-maddy@linux.ibm.com
* powerpc/platforms/83xx: Use of_device_get_match_data()Minghao Chi (CGEL ZTE)2022-05-221-5/+2
| | | | | | | | | | Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220225010737.2038781-1-chi.minghao@zte.com.cn
* powerpc/eeh: Drop redundant spinlock initializationHaowen Bai2022-05-221-2/+1
| | | | | | | | | | slot_errbuf_lock has declared and initialized by DEFINE_SPINLOCK, so we don't need to spin_lock_init again, drop it. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1652232476-9696-1-git-send-email-baihaowen@meizu.com
* powerpc/iommu: Add missing of_node_put in iommu_init_early_dartPeng Wu2022-05-221-2/+4
| | | | | | | | | | | The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak. Signed-off-by: Peng Wu <wupeng58@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220425081245.21705-1-wupeng58@huawei.com
* powerpc/pseries/vas: Call misc_deregister if sysfs init failsZheng Bin2022-05-221-0/+2
| | | | | | | | | | Undo effects of misc_register if sysfs init fails after misc_register. Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220511033507.2745992-1-zhengbin13@huawei.com
* powerpc/papr_scm: Fix leaking nvdimm_events_map elementsVaibhav Jain2022-05-221-30/+24
| | | | | | | | | | | | | | | | | | | | | | | | | Right now 'char *' elements allocated for individual 'stat_id' in 'papr_scm_priv.nvdimm_events_map[]' during papr_scm_pmu_check_events(), get leaked in papr_scm_remove() and papr_scm_pmu_register(), papr_scm_pmu_check_events() error paths. Also individual 'stat_id' arent NULL terminated 'char *' instead they are fixed 8-byte sized identifiers. However papr_scm_pmu_register() assumes it to be a NULL terminated 'char *' and at other places it assumes it to be a 'papr_scm_perf_stat.stat_id' sized string which is 8-byes in size. Fix this by allocating the memory for papr_scm_priv.nvdimm_events_map to also include space for 'stat_id' entries. This is possible since number of available events/stat_ids are known upfront. This saves some memory and one extra level of indirection from 'nvdimm_events_map' to 'stat_id'. Also rest of the code can continue to call 'kfree(papr_scm_priv.nvdimm_events_map)' without needing to iterate over the array and free up individual elements. Fixes: 4c08d4bbc089 ("powerpc/papr_scm: Add perf interface support") Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220511082637.646714-1-vaibhav@linux.ibm.com
* powerpc/fsl_rio: Fix refcount leak in fsl_rio_setupMiaoqian Lin2022-05-221-0/+2
| | | | | | | | | | | | of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: abc3aeae3aaa ("fsl-rio: Add two ports and rapidio message units support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220512123724.62931-1-linmq006@gmail.com
* powerpc/xive: Fix refcount leak in xive_spapr_initMiaoqian Lin2022-05-221-2/+5
| | | | | | | | | | | | | of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220512090535.33397-1-linmq006@gmail.com
* powerpc/numa: Associate numa node to its cpu earlierOscar Salvador2022-05-223-31/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | powerpc is the only platform that do not rely on cpu_up()->try_online_node() to bring up a numa node, and special cases it, instead, deep in its own machinery: dlpar_online_cpu find_and_online_cpu_nid try_online_node This should not be needed, but the thing is that the try_online_node() from cpu_up() will not apply on the right node, because cpu_to_node() will return the old mapping numa<->cpu that gets set on boot stage for all possible cpus. That can be seen easily if we try to print out the numa node passed to try_online_node() in cpu_up(). The thing is that the numa<->cpu mapping does not get updated till a much later stage in start_secondary: start_secondary: set_numa_node(numa_cpu_lookup_table[cpu]) But we do not really care, as we already now the CPU <-> NUMA associativity back in find_and_online_cpu_nid(), so let us make use of that and set the proper numa<->cpu mapping, so cpu_to_node() in cpu_up() returns the right node and try_online_node() can do its work. Signed-off-by: Oscar Salvador <osalvador@suse.de> Tested-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220411074934.4632-1-osalvador@suse.de
* macintosh: via-pmu and via-cuda need RTC_LIBRandy Dunlap2022-05-221-0/+2
| | | | | | | | | | | | | | | | | | | Fix build when RTC_LIB is not set/enabled. Eliminates these build errors: m68k-linux-ld: drivers/macintosh/via-pmu.o: in function `pmu_set_rtc_time': drivers/macintosh/via-pmu.c:1769: undefined reference to `rtc_tm_to_time64' m68k-linux-ld: drivers/macintosh/via-cuda.o: in function `cuda_set_rtc_time': drivers/macintosh/via-cuda.c:797: undefined reference to `rtc_tm_to_time64' Fixes: 0792a2c8e0bb ("macintosh: Use common code to access RTC") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220410161035.592-1-rdunlap@infradead.org
* macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabledFinn Thain2022-05-223-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | drivers/macintosh/via-pmu-event.o: In function `via_pmu_event': via-pmu-event.c:(.text+0x44): undefined reference to `input_event' via-pmu-event.c:(.text+0x68): undefined reference to `input_event' via-pmu-event.c:(.text+0x94): undefined reference to `input_event' via-pmu-event.c:(.text+0xb8): undefined reference to `input_event' drivers/macintosh/via-pmu-event.o: In function `via_pmu_event_init': via-pmu-event.c:(.init.text+0x20): undefined reference to `input_allocate_device' via-pmu-event.c:(.init.text+0xc4): undefined reference to `input_register_device' via-pmu-event.c:(.init.text+0xd4): undefined reference to `input_free_device' make[1]: *** [Makefile:1155: vmlinux] Error 1 make: *** [Makefile:350: __build_one_by_one] Error 2 Don't call into the input subsystem unless CONFIG_INPUT is built-in. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/5edbe76ce68227f71e09af4614cc4c1bd61c7ec8.1649326292.git.fthain@linux-m68k.org
* powerpc/powernv: fix missing of_node_put in uv_init()Lv Ruyi2022-05-221-0/+1
| | | | | | | | | | | of_find_compatible_node() returns node pointer with refcount incremented, use of_node_put() on it when done. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220407090043.2491854-1-lv.ruyi@zte.com.cn
* powerpc/85xx: Remove FSL_85XX_CACHE_SRAMChristophe Leroy2022-05-227-516/+0
| | | | | | | | | | | | | | CONFIG_FSL_85XX_CACHE_SRAM is an option that is not user selectable and which is not selected by any driver nor any defconfig. Remove it and all associated code. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9949813a6b758903b7bee910f798ba2ca82ff8ee.1648720908.git.christophe.leroy@csgroup.eu
* powerpc/xics: fix refcount leak in icp_opal_init()Lv Ruyi2022-05-221-0/+1
| | | | | | | | | | | The of_find_compatible_node() function returns a node pointer with refcount incremented, use of_node_put() on it when done. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220402013419.2410298-1-lv.ruyi@zte.com.cn
* powerpc/perf: Fix the threshold compare group constraint for power9Kajol Jain2022-05-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thresh compare bits for a event is used to program thresh compare field in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9). When scheduling events as a group, all events in that group should match value in threshold bits (like thresh compare, thresh control, thresh select). Otherwise event open for the sibling events should fail. But in the current code, incase thresh compare bits are not valid, we are not failing in group_constraint function which can result in invalid group schduling. Fix the issue by returning -1 incase event is threshold and threshold compare value is not valid. Thresh control bits in the event code is used to program thresh_ctl field in Monitor Mode Control Register A (MMCRA: 48-55). In below example, the scheduling of group events PM_MRK_INST_CMPL (873534401e0) and PM_THRESH_MET (8734340101ec) is expected to fail as both event request different thresh control bits and invalid thresh compare value. Result before the patch changes: [command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1 Performance counter stats for 'sleep 1': 11,048 r8735340401e0 1,967 r8734340101ec 1.001354036 seconds time elapsed 0.001421000 seconds user 0.000000000 seconds sys Result after the patch changes: [command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1 Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (r8735340401e0). /bin/dmesg | grep -i perf may provide additional information. Fixes: 78a16d9fc1206 ("powerpc/perf: Avoid FAB_*_MATCH checks for power9") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220506061015.43916-2-kjain@linux.ibm.com
* powerpc/perf: Fix the threshold compare group constraint for power10Kajol Jain2022-05-221-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thresh compare bits for a event is used to program thresh compare field in Monitor Mode Control Register A (MMCRA: 8-18 bits for power10). When scheduling events as a group, all events in that group should match value in threshold bits. Otherwise event open for the sibling events should fail. But in the current code, incase thresh compare bits are not valid, we are not failing in group_constraint function which can result in invalid group schduling. Fix the issue by returning -1 incase event is threshold and threshold compare value is not valid in group_constraint function. Patch also fixes the p10_thresh_cmp_val function to return -1, incase threshold bits are not valid and changes corresponding check in is_thresh_cmp_valid function to return false only when the thresh_cmp value is less then 0. Thresh control bits in the event code is used to program thresh_ctl field in Monitor Mode Control Register A (MMCRA: 48-55). In below example, the scheduling of group events PM_MRK_INST_CMPL (3534401e0) and PM_THRESH_MET (34340101ec) is expected to fail as both event request different thresh control bits. Result before the patch changes: [command]# perf stat -e "{r35340401e0,r34340101ec}" sleep 1 Performance counter stats for 'sleep 1': 8,482 r35340401e0 0 r34340101ec 1.001474838 seconds time elapsed 0.001145000 seconds user 0.000000000 seconds sys Result after the patch changes: [command]# perf stat -e "{r35340401e0,r34340101ec}" sleep 1 Performance counter stats for 'sleep 1': <not counted> r35340401e0 <not supported> r34340101ec 1.001499607 seconds time elapsed 0.000204000 seconds user 0.000760000 seconds sys Fixes: 82d2c16b350f7 ("powerpc/perf: Adds support for programming of Thresholding in P10") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220506061015.43916-1-kjain@linux.ibm.com
* powerpc/kaslr_booke: Fix build errorYueHaibing2022-05-221-0/+2
| | | | | | | | | | | | | | | | | | | | arch/powerpc/mm/nohash/kaslr_booke.c: In function ‘kaslr_get_cmdline’: arch/powerpc/mm/nohash/kaslr_booke.c:46:2: error: implicit declaration of function ‘early_init_dt_scan_chosen’ early_init_dt_scan_chosen(boot_command_line); ^~~~~~~~~~~~~~~~~~~~~~~~~ arch/powerpc/mm/nohash/kaslr_booke.c: In function ‘get_initrd_range’: arch/powerpc/mm/nohash/kaslr_booke.c:210:10: error: implicit declaration of function ‘of_read_number’ start = of_read_number(prop, len / 4); ^~~~~~~~~~~~~~ Add missing include files to fix this. Fixes: 86c38fec69a4 ("powerpc: Remove asm/prom.h from all files that don't need it") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220517094900.14900-1-yuehaibing@huawei.com
* powerpc/book3e: Fix build errorYueHaibing2022-05-221-0/+1
| | | | | | | | | | | | | | | | arch/powerpc/mm/nohash/fsl_book3e.c: In function ‘relocate_init’: arch/powerpc/mm/nohash/fsl_book3e.c:348:2: error: implicit declaration of function ‘early_get_first_memblock_info’ early_get_first_memblock_info(__va(dt_ptr), &size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Add missing include file linux/of_fdt.h to fix this. Fixes: 86c38fec69a4 ("powerpc: Remove asm/prom.h from all files that don't need it") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220517094830.27560-1-yuehaibing@huawei.com
* powerpc: Book3S 64-bit outline-only KASAN supportDaniel Axtens2022-05-2216-7/+232
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement a limited form of KASAN for Book3S 64-bit machines running under the Radix MMU, supporting only outline mode. - Enable the compiler instrumentation to check addresses and maintain the shadow region. (This is the guts of KASAN which we can easily reuse.) - Require kasan-vmalloc support to handle modules and anything else in vmalloc space. - KASAN needs to be able to validate all pointer accesses, but we can't instrument all kernel addresses - only linear map and vmalloc. On boot, set up a single page of read-only shadow that marks all iomap and vmemmap accesses as valid. - Document KASAN in powerpc docs. Background ---------- KASAN support on Book3S is a bit tricky to get right: - It would be good to support inline instrumentation so as to be able to catch stack issues that cannot be caught with outline mode. - Inline instrumentation requires a fixed offset. - Book3S runs code with translations off ("real mode") during boot, including a lot of generic device-tree parsing code which is used to determine MMU features. [ppc64 mm note: The kernel installs a linear mapping at effective address c000...-c008.... This is a one-to-one mapping with physical memory from 0000... onward. Because of how memory accesses work on powerpc 64-bit Book3S, a kernel pointer in the linear map accesses the same memory both with translations on (accessing as an 'effective address'), and with translations off (accessing as a 'real address'). This works in both guests and the hypervisor. For more details, see s5.7 of Book III of version 3 of the ISA, in particular the Storage Control Overview, s5.7.3, and s5.7.5 - noting that this KASAN implementation currently only supports Radix.] - Some code - most notably a lot of KVM code - also runs with translations off after boot. - Therefore any offset has to point to memory that is valid with translations on or off. One approach is just to give up on inline instrumentation. This way boot-time checks can be delayed until after the MMU is set is up, and we can just not instrument any code that runs with translations off after booting. Take this approach for now and require outline instrumentation. Previous attempts allowed inline instrumentation. However, they came with some unfortunate restrictions: only physically contiguous memory could be used and it had to be specified at compile time. Maybe we can do better in the future. [paulus@ozlabs.org - Rebased onto 5.17. Note that a kernel with CONFIG_KASAN=y will crash during boot on a machine using HPT translation because not all the entry points to the generic KASAN code are protected with a call to kasan_arch_is_ready().] Originally-by: Balbir Singh <bsingharora@gmail.com> # ppc64 out-of-line radix version Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> [mpe: Update copyright year and comment formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTE69OQwiG7z+Gu@cleo
* powerpc/kasan: Disable address sanitization in kexec pathsDaniel Axtens2022-05-227-15/+18
| | | | | | | | | | | | | | | | | The kexec code paths involve code that necessarily run in real mode, as CPUs are disabled and control is transferred to the new kernel. Disable address sanitization for the kexec code and the functions called in real mode on CPUs being disabled. [paulus@ozlabs.org: combined a few work-in-progress commits of Daniel's and wrote the commit message.] Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> [mpe: Move pseries_machine_kexec() into kexec.c so setup.c can be instrumented] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTFSQ2TUSEaDdVC@cleo
* powerpc/kasan: Don't instrument non-maskable or raw interruptsDaniel Axtens2022-05-225-26/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable address sanitization for raw and non-maskable interrupt handlers, because they can run in real mode, where we cannot access the shadow memory. (Note that kasan_arch_is_ready() doesn't test for real mode, since it is a static branch for speed, and in any case not all the entry points to the generic KASAN code are protected by kasan_arch_is_ready guards.) The changes to interrupt_nmi_enter/exit_prepare() look larger than they actually are. The changes are equivalent to adding !IS_ENABLED(CONFIG_KASAN) to the conditions for calling nmi_enter() or nmi_exit() in real mode. That is, the code is equivalent to using the following condition for calling nmi_enter/exit: if (((!IS_ENABLED(CONFIG_PPC_BOOK3S_64) || !firmware_has_feature(FW_FEATURE_LPAR) || radix_enabled()) && !IS_ENABLED(CONFIG_KASAN) || (mfmsr() & MSR_DR)) That unwieldy condition has been split into several statements with comments, for easier reading. The nmi_ipi_lock functions that call atomic functions (i.e., nmi_ipi_lock_start(), nmi_ipi_lock() and nmi_ipi_unlock()), besides being marked noinstr, now call arch_atomic_* functions instead of atomic_* functions because with KASAN enabled, the atomic_* functions are wrappers which explicitly do address sanitization on their arguments. Since we are trying to avoid address sanitization, we have to use the lower-level arch_atomic_* versions. In hv_nmi_check_nonrecoverable(), the regs_set_unrecoverable() call has been open-coded so as to avoid having to either trust the inlining or mark regs_set_unrecoverable() as noinstr. [paulus@ozlabs.org: combined a few work-in-progress commits of Daniel's and wrote the commit message.] Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTFGaKM8Pd46PIK@cleo
* powerpc/mm/kasan: rename kasan_init_32.c to init_32.cDaniel Axtens2022-05-222-1/+1
| | | | | | | | | | | | kasan is already implied by the directory name, we don't need to repeat it. Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTEyoi+xu9brJYe@cleo
* kasan: Document support on 32-bit powerpcDaniel Axtens2022-05-221-0/+12
| | | | | | | | | | | | KASAN is supported on 32-bit powerpc and the docs should reflect this. Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YoTEnMLrnd64j0w5@cleo
* powerpc/ftrace: Remove ftrace init tramp once kernel init is completeNaveen N. Rao2022-05-223-4/+17
| | | | | | | | | | | | Stop using the ftrace trampoline for init section once kernel init is complete. Fixes: 67361cf8071286 ("powerpc/ftrace: Handle large kernel configs") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220516071422.463738-1-naveen.n.rao@linux.vnet.ibm.com
* powerpc/irq: Remove arch_local_irq_restore() for !CONFIG_CC_HAS_ASM_GOTOChristophe Leroy2022-05-221-77/+0
| | | | | | | | | | | All supported versions of GCC & clang support asm goto. Remove the !CONFIG_CC_HAS_ASM_GOTO version of arch_local_irq_restore() Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/58df50c9e77e2ed945bacdead30412770578886b.1652715336.git.christophe.leroy@csgroup.eu
* selftests/powerpc: Better reporting in spectre_v2Russell Currey2022-05-221-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | In commit f3054ffd71b5 ("selftests/powerpc: Return skip code for spectre_v2"), the spectre_v2 selftest is updated to be aware of cases where the vulnerability status reported in sysfs is incorrect, skipping the test instead. This happens because qemu can misrepresent the mitigation status of the host to the guest. If the count cache is disabled in the host, and this is correctly reported to the guest, then the guest won't apply mitigations. If the guest is then migrated to a new host where mitigations are necessary, it is now vulnerable because it has not applied mitigations. Update the selftest to report when we see excessive misses, indicative of the count cache being disabled. If software flushing is enabled, also warn that these flushes are just wasting performance. Signed-off-by: Russell Currey <ruscur@russell.cc> [mpe: Rebase and update change log appropriately] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210608064809.199116-1-ruscur@russell.cc
* powerpc/powernv: Get STF barrier requirements from device-treeRussell Currey2022-05-221-0/+3
| | | | | | | | | | | | | | | | | | The device-tree property no-need-store-drain-on-priv-state-switch is equivalent to H_CPU_BEHAV_NO_STF_BARRIER from the H_CPU_GET_CHARACTERISTICS hcall on pseries. Since commit 84ed26fd00c5 ("powerpc/security: Add a security feature for STF barrier") powernv systems with this device-tree property have been enabling the STF barrier when they have no need for it. This patch fixes this by clearing the STF barrier feature on those systems. Fixes: 84ed26fd00c5 ("powerpc/security: Add a security feature for STF barrier") Reported-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220404101536.104794-2-ruscur@russell.cc
* powerpc/powernv: Get L1D flush requirements from device-treeRussell Currey2022-05-221-0/+6
| | | | | | | | | | | | | | | | | | | | | The device-tree properties no-need-l1d-flush-msr-pr-1-to-0 and no-need-l1d-flush-kernel-on-user-access are the equivalents of H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY and H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS from the H_GET_CPU_CHARACTERISTICS hcall on pseries respectively. In commit d02fa40d759f ("powerpc/powernv: Remove POWER9 PVR version check for entry and uaccess flushes") the condition for disabling the L1D flush on kernel entry and user access was changed from any non-P9 CPU to only checking P7 and P8. Without the appropriate device-tree checks for newer processors on powernv, these flushes are unnecessarily enabled on those systems. This patch corrects this. Fixes: d02fa40d759f ("powerpc/powernv: Remove POWER9 PVR version check for entry and uaccess flushes") Reported-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220404101536.104794-1-ruscur@russell.cc
* powerpc/85xx/p2020: Add fsl,mpc8548-pmc nodePali Rohár2022-05-221-0/+5
| | | | | | | | | | | P2020 also contains Power Management Controller and their registers at offset 0xe0070 compatible with mpc8548. So add PMC node into DTS include file fsl/p2020si-post.dtsi Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220506203621.26314-1-pali@kernel.org
* powerpc/64: Only WARN if __pa()/__va() called with bad addressesMichael Ellerman2022-05-221-2/+5
| | | | | | | | | | | | | We added checks to __pa() / __va() to ensure they're only called with appropriate addresses. But using BUG_ON() is too strong, it means virt_addr_valid() will BUG when DEBUG_VIRTUAL is enabled. Instead switch them to warnings, arm64 does the same. Fixes: 4dd7554a6456 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220406145802.538416-5-mpe@ellerman.id.au
* arch/Kconfig: Drop references to powerpc PAGE_SIZE symbolsMichael Ellerman2022-05-221-2/+0
| | | | | | | | | | | | | In the previous commit powerpc added PAGE_SIZE related config symbols using the generic names. So there's no need to refer to them in the definition of PAGE_SIZE_LESS_THAN_64KB etc, the negative dependency on the generic symbol is sufficient (in this case !PAGE_SIZE_64KB). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220505125123.2088143-2-mpe@ellerman.id.au
* powerpc: Add generic PAGE_SIZE config symbolsMichael Ellerman2022-05-221-0/+16
| | | | | | | | | | | | | | | Other arches (sh, mips, hexagon) use standard names for PAGE_SIZE related config symbols. Add matching symbols for powerpc, which are enabled by default but depend on our architecture specific PAGE_SIZE symbols. This allows generic/driver code to express dependencies on the PAGE_SIZE without needing to refer to architecture specific config symbols. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220505125123.2088143-1-mpe@ellerman.id.au
* powerpc/pseries/vas: sysfs comments with the correct entriesHaren Myneni2022-05-221-7/+7
| | | | | | | | | | | VAS entry is created as a misc device and the sysfs comments should list the proper entries Reported-by: Matheus Castanho <mscastanho@ibm.com> Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6dee950c7b72a4965c102208041f14a063cf5a8c.camel@linux.ibm.com
* powerpc/powernv/vas: Assign real address to rx_fifo in vas_rx_win_attrHaren Myneni2022-05-225-6/+6
| | | | | | | | | | | | | | | | In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this function is called to initialize registers for receive and fault windows. But the real address is passed in winctx->rx_fifo for receive windows and the virtual address for fault windows which causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by assigning only real address to rx_fifo in vas_rx_win_attr struct for both receive and fault windows. Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/338e958c7ab8f3b266fa794a1f80f99b9671829e.camel@linux.ibm.com
* powerpc/opcodes: Remove unused PPC_INST_XXX macrosChristophe Leroy2022-05-221-9/+4
| | | | | | | | | | | | | | | | | The following PPC_INST_XXX macros are not used anymore outside ppc-opcode.h: - PPC_INST_LD - PPC_INST_STD - PPC_INST_ADDIS - PPC_INST_ADD - PPC_INST_DIVD Remove them. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8c28636126f69141419953b5638b4a908c184dc1.1652074503.git.christophe.leroy@csgroup.eu
* powerpc/inst: Remove PPC_INST_BLChristophe Leroy2022-05-222-2/+1
| | | | | | | | | | | Convert last users of PPC_INST_BL to PPC_RAW_BL() And remove PPC_INST_BL. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/d9eacb758e7ae7cf224211ebe3f6f7d409a333be.1652074503.git.christophe.leroy@csgroup.eu
* powerpc/modules: Use PPC_LI macros instead of opencodingChristophe Leroy2022-05-222-9/+5
| | | | | | | | | Use PPC_LI_MASK and PPC_LI() instead of opencoding. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3d56d7bc3200403773d54e62659d0e01292a055d.1652074503.git.christophe.leroy@csgroup.eu
* powerpc/inst: Remove PPC_INST_BRANCHChristophe Leroy2022-05-222-3/+2
| | | | | | | | | | | Convert last users of PPC_INST_BRANCH to PPC_RAW_BRANCH() And remove PPC_INST_BRANCH. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/fa8807108a2ef2287a2c9651d6e1ff7c051923d9.1652074503.git.christophe.leroy@csgroup.eu
* powerpc/ftrace: Don't use copy_from_kernel_nofault() in ↵Christophe Leroy2022-05-221-9/+18
| | | | | | | | | | | | | | | | | | | | | | | module_trampoline_target() module_trampoline_target() is quite a hot path used when activating/deactivating function tracer. Avoid the heavy copy_from_kernel_nofault() by doing four calls to copy_inst_from_kernel_nofault(). Use __copy_inst_from_kernel_nofault() for the 3 last calls. First call is done to copy_from_kernel_nofault() to check address is within kernel space. No risk to wrap out the top of kernel space because the last page is never mapped so if address is in last page the first copy will fails and the other ones will never be performed. And also make it notrace just like all functions that call it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c55559103e014b7863161559d340e8e9484eaaa6.1652074503.git.christophe.leroy@csgroup.eu
* powerpc/inst: Add __copy_inst_from_kernel_nofault()Christophe Leroy2022-05-221-4/+9
| | | | | | | | | | | | | | On the same model as get_user() versus __get_user(), introduce __copy_inst_from_kernel_nofault() which doesn't check address. To be used by callers that have already checked that the adress is a kernel address. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1f3702890d6dbd64702b61834753bcc96851c18c.1652074503.git.christophe.leroy@csgroup.eu
* powerpc/ftrace: Minimise number of #ifdefsChristophe Leroy2022-05-223-94/+85
| | | | | | | | | | | | A lot of #ifdefs can be replaced by IS_ENABLED() Do so. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Fold in changes suggested by Naveen and Christophe on list] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/18ce6708d6f8c71d87436f9c6019f04df4125128.1652074503.git.christophe.leroy@csgroup.eu
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-25 16:50:43 +0100