summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: dts: Add initial DTS for the PIC32MZDA Starter KitJoshua Henderson2016-01-246-0/+697
| | | | | | | | | | | | | | | | | | | This adds basic DTS configuration for the PIC32MZDA chip and in turn the PIC32MZDA Starter Kit. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12104/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add support for PIC32MZDA platformJoshua Henderson2016-01-2422-0/+1476
| | | | | | | | | | | | | | | | This adds support for the Microchip PIC32 MIPS microcontroller with the specific variant PIC32MZDA. PIC32MZDA is based on the MIPS m14KEc core and boots using device tree. This includes an early pin setup and early clock setup needed prior to device tree being initialized. In additon, an interface is provided to synchronize access to registers shared across several peripherals. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12097/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* dt/bindings: Add bindings for PIC32/MZDA platformsJoshua Henderson2016-01-241-0/+31
| | | | | | | | | | | | | | | | | This adds support for the Microchip PIC32 platform along with the specific variant PIC32MZDA on a PIC32MZDA Starter Kit. Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12096/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQCHIP: irq-pic32-evic: Add support for PIC32 interrupt controllerCristian Birsan2016-01-243-0/+330
| | | | | | | | | | | | | | | | | | | | | | | | This adds support for the interrupt controller present on PIC32 class devices. It handles all internal and external interrupts. This controller exists outside of the CPU core and is the arbitrator of all interrupts (including interrupts from the CPU itself) before they are presented to the CPU. The following features are supported: - DT properties for EVIC and for devices/peripherals that use interrupt lines - Persistent and non-persistent interrupt handling - irqdomain and generic chip support - Configuration of external interrupt edge polarity Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* dt/bindings: Add bindings for PIC32 interrupt controllerCristian Birsan2016-01-241-0/+67
| | | | | | | | | | | | | | | | | | | | | | Document the devicetree bindings for the interrupt controller on Microchip PIC32 class devices. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12093/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: bmips: Improve BCM6368 device treeÁlvaro Fernández Rojas2016-01-241-0/+22
| | | | | | | | | | | | | | | | | Add brcm,bcm6358-leds node to bcm6368.dtsi Add reboot support (syscon-reboot as defined in BCM6328) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/12117/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: bmips: Improve BCM6328 device treeÁlvaro Fernández Rojas2016-01-241-0/+9
| | | | | | | | | | | | | | | Adds bcm6328-leds node to bcm6328.dtsi Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: Álvaro Fernández Rojas <noltari@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/12116/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ptrace: Drop cp0_tcstatus from regoffset_table[]James Hogan2016-01-241-3/+0
| | | | | | | | | | | | | The cp0_tcstatus member of struct pt_regs was removed along with the rest of SMTC in v3.16, commit b633648c5ad3 ("MIPS: MT: Remove SMTC support"), however recent uprobes support in v4.3 added back a reference to it in the regoffset_table[] in ptrace.c. Remove it. Signed-off-by: James Hogan <james.hogan@imgtec.com> Fixes: 40e084a506eb ("MIPS: Add uprobes support.") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: TXx9: iocled: Be sure to clamp return valueLinus Walleij2016-01-241-1/+1
| | | | | | | | | | | | | As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11925/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: RB532: Be sure to clamp return valueLinus Walleij2016-01-241-1/+1
| | | | | | | | | | | | | As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11924/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: TXx9: Be sure to clamp return valueLinus Walleij2016-01-241-1/+1
| | | | | | | | | | | | | As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11923/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ar7: Be sure to clamp return valueLinus Walleij2016-01-241-1/+1
| | | | | | | | | | | | | | | As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11922/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Be sure to clamp return valueLinus Walleij2016-01-241-3/+3
| | | | | | | | | | | | | As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11921/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: math-emu: dsemul: Reduce `get_isa16_mode' clutterMaciej W. Rozycki2016-01-241-8/+9
| | | | | | | | Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: inst.h: Fix some instruction descriptionsMaciej W. Rozycki2016-01-241-2/+2
| | | | | | | | | | | | | | | Fix the description of the microMIPS NOP16 encoding or MM_NOP16, which is not equivalent to the MIPS16 NOP instruction. This is 0x0c00 and represents the microMIPS `MOVE16 $0, $0' operation, whereas MIPS16 NOP is encoded as 0x6500, representing `MOVE $0, $16'. Also fix a typo in `mm_fp0_format' description. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12177/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: math-emu: dsemul: Correct description of the emulation frameMaciej W. Rozycki2016-01-241-7/+2
| | | | | | | | | | | | | | | Remove irrelevant content from the description of the emulation frame in `mips_dsemul', referring to bare-metal configurations. Update the text, reflecting the change made with commit ba3049ed4086 ("MIPS: Switch FPU emulator trap to BREAK instruction."), where we switched from using an address error exception on an unaligned access to the use of a BREAK 514 instruction causing a breakpoint exception instead. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12176/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: math-emu: Correct the emulation of microMIPS ADDIUPC instructionMaciej W. Rozycki2016-01-242-2/+30
| | | | | | | | | | | | | | | Emulate the microMIPS ADDIUPC instruction directly in `mips_dsemul'. If executed in the emulation frame, this instruction produces an incorrect result, because the value of the PC there is not the same as where the instruction originated. Reshape code so as to handle all microMIPS cases together. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12175/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: math-emu: Make microMIPS branch delay slot emulation workMaciej W. Rozycki2016-01-243-6/+9
| | | | | | | | | | | | | | | | | | | | | | | Complement commit 102cedc32a6e ("MIPS: microMIPS: Floating point support.") which introduced microMIPS FPU emulation, but did not adjust the encoding of the BREAK instruction used to terminate the branch delay slot emulation frame. Consequently the execution of any such frame is indeterminate and, depending on CPU configuration, will result in random code execution or an offending program being terminated with SIGILL. This is because the regular MIPS BREAK instruction is encoded with the 0 major and the 0xd minor opcode, however in the microMIPS instruction set this major/minor opcode pair denotes an encoding reserved for the DSP ASE. Instead the microMIPS BREAK instruction is encoded with the 0 major and the 0x7 minor opcode. Use the correct BREAK encoding for microMIPS FPU emulation then. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12174/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: math-emu: dsemul: Fix ill formatting of microMIPS partMaciej W. Rozycki2016-01-241-6/+12
| | | | | | | | | | | | Correct formatting breakage introduced with commit 102cedc32a6e ("MIPS: microMIPS: Floating point support."), so that further changes to this code can be consistent. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12173/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: math-emu: Correctly handle NOP emulationMaciej W. Rozycki2016-01-242-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix an issue introduced with commit 9ab4471c9f1b ("MIPS: math-emu: Correct delay-slot exception propagation") where the emulation of a NOP instruction signals the need to terminate the emulation loop. This in turn, if the PC has not changed from the entry to the loop, will cause the kernel to terminate the program with SIGILL. Consider this program: static double div(double d) { do d /= 2.0; while (d > .5); return d; } int main(int argc, char **argv) { return div(argc); } which gets compiled to the following binary code: 00400490 <main>: 400490: 44840000 mtc1 a0,$f0 400494: 3c020040 lui v0,0x40 400498: d44207f8 ldc1 $f2,2040(v0) 40049c: 46800021 cvt.d.w $f0,$f0 4004a0: 46220002 mul.d $f0,$f0,$f2 4004a4: 4620103c c.lt.d $f2,$f0 4004a8: 4501fffd bc1t 4004a0 <main+0x10> 4004ac: 00000000 nop 4004b0: 4620000d trunc.w.d $f0,$f0 4004b4: 03e00008 jr ra 4004b8: 44020000 mfc1 v0,$f0 4004bc: 00000000 nop Where the FPU emulator is used, depending on the number of command-line arguments this code will either run to completion or terminate with SIGILL. If no arguments are specified, then BC1T will not be taken, NOP will not be emulated and code will complete successfully. If one argument is specified, then BC1T will be taken once and NOP will be emulated. At this point the entry PC value will be 0x400498 and the new PC value, set by `mips_dsemul' will be 0x4004a0, the target of BC1T. The emulation loop will terminate, but SIGILL will not be issued, because the PC has changed. The FPU emulator will be entered again and on the second execution BC1T will not be taken, NOP will not be emulated and code will complete successfully. If two or more arguments are specified, then the first execution of BC1T will proceed as above. Upon reentering the FPU emulator the emulation loop will continue to BC1T, at which point the branch will be taken and NOP emulated again. At this point however the entry PC value will be 0x4004a0, the same as the target of BC1T. This will make the emulator conclude that execution has not advanced and therefore an unsupported FPU instruction has been encountered, and SIGILL will be sent to the process. Fix the problem by extending the internal API of `mips_dsemul', making it return -1 if no delay slot emulation frame has been made, the instruction has been handled and execution of the emulation loop needs to continue as if nothing happened. Remove code from `mips_dsemul' to reproduce steps made by the emulation loop at the conclusion of each iteration, as those will be reached normally now. Adjust call sites accordingly. Document the API. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12172/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Fix some missing CONFIG_CPU_MIPSR6 #ifdefsHuacai Chen2016-01-242-3/+3
| | | | | | | | | | | | | | | | | | Commit be0c37c985eddc4 (MIPS: Rearrange PTE bits into fixed positions.) defines fixed PTE bits for MIPS R2. Then, commit d7b631419b3d230a4d383 (MIPS: pgtable-bits: Fix XPA damage to R6 definitions.) adds the MIPS R6 definitions in the same way as MIPS R2. But some R6 #ifdefs in the later commit are missing, so in this patch I fix that. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: sync-r4k: reduce skew while synchronizationHuacai Chen2016-01-241-24/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | While synchronization, count register will go backwards for the master. If synchronise_count_master() runs before synchronise_count_slave(), skew becomes even more. The skew is very harmful for CPU hotplug (CPU0 do synchronization with CPU1, then CPU0 do synchronization with CPU2 and CPU0's count goes backwards, so it will be out of sync with CPU1). After the commit cf9bfe55f24973a8f40e2 (MIPS: Synchronize MIPS count one CPU at a time), we needn't evaluate count_reference at the beginning of synchronise_count_master() any more. Thus, we evaluate the initcount (It seems like count_reference is redundant) in the 2nd loop. Since we write the count register in the last loop, we don't need additional barriers (the existing memory barriers are enough). Moreover, I think we loop 3 times is enough to get a primed instruction cache, this can also get less skew than looping 5 times. Comments are also updated in this patch. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/12163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: hpet: Choose a safe value for the ETIME checkHuacai Chen2016-01-221-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is borrowed from x86 hpet driver and explaind below: Due to the overly intelligent design of HPETs, we need to workaround the problem that the compare value which we write is already behind the actual counter value at the point where the value hits the real compare register. This happens for two reasons: 1) We read out the counter, add the delta and write the result to the compare register. When a NMI hits between the read out and the write then the counter can be ahead of the event already. 2) The write to the compare register is delayed by up to two HPET cycles in AMD chipsets. We can work around this by reading back the compare register to make sure that the written value has hit the hardware. But that is bad performance wise for the normal case where the event is far enough in the future. As we already know that the write can be delayed by up to two cycles we can avoid the read back of the compare register completely if we make the decision whether the delta has elapsed already or not based on the following calculation: cmp = event - actual_count; If cmp is less than 64 HPET clock cycles, then we decide that the event has happened already and return -ETIME. That covers the above #1 and #2 problems which would cause a wait for HPET wraparound (~306 seconds). Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12162/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Loongson-3: Fix SMP_ASK_C0COUNT IPI handlerHuacai Chen2016-01-221-7/+13
| | | | | | | | | | | | | | | | | | | | | When Core-0 handle SMP_ASK_C0COUNT IPI, we should make other cores to see the result as soon as possible (especially when Store-Fill-Buffer is enabled). Otherwise, C0_Count syncronization makes no sense. BTW, array is more suitable than per-cpu variable for syncronization, and there is a corner case should be avoid: C0_Count of Core-0 can be really 0. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/12160/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Loongson-3: Improve -march option and move it to PlatformHuacai Chen2016-01-222-10/+21
| | | | | | | | | | | | | | | | If GCC >= 4.9 and Binutils >=2.25, we use -march=loongson3a, otherwise we use -march=mips64r2, this can slightly improve performance. Besides, arch/mips/loongson64/Platform is a better location rather than arch/ mips/Makefile. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12161/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Cleanup the unused __arch_local_irq_restore() functionHuacai Chen2016-01-222-59/+1
| | | | | | | | | | | | | | | In history, __arch_local_irq_restore() is only used by SMTC. However, SMTC support has been removed since 3.16, this patch remove the unused function. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12159/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add IEEE Std 754 conformance mode selectionMaciej W. Rozycki2016-01-204-14/+142
| | | | | | | | | | | | | | | | | | | | | | | | Add an `ieee754=' kernel parameter to control IEEE Std 754 conformance mode. Use separate flags copied from the respective CPU feature flags, and adjusted according to the conformance mode selected, to make binaries requesting individual NaN encoding modes accepted or rejected as needed. Update the initial setting for FCSR and, in the full FPU emulation mode, its read-only mask accordingly. Accept the mode selection requested for legacy processors as well. As with the EF_MIPS_NAN2008 ELF file header flag adjust both ABS2008 and NAN2008 bits at the same time, to match the choice made for hardware currently implemented. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11481/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Determine the presence of IEEE Std 754-2008 featuresMaciej W. Rozycki2016-01-201-2/+74
| | | | | | | | | | | | | | | | | | | | | | Determine the presence of and the amount of control available over IEEE Std 754-2008 features. In the case of a hardware FPU being used examine the FIR register for the presence of the HAS2008 bit and then the FCSR register for the writability of the ABS2008 and NAN2008 bits and the hardwired state of each of these bits if read-only. Update the initial FCSR contents used for threads and the FCSR writability mask accordingly. For full FPU emulation and MIPS32 or MIPS64 processors make the FCSR ABS2008 and NAN2008 bits writable. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11480/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ELF: Interpret the NAN2008 file header flagMaciej W. Rozycki2016-01-202-3/+62
| | | | | | | | | | | | | | | | | | | | | | | | Handle the EF_MIPS_NAN2008 ELF file header flag and refuse execution where there is no support in the FPU for the NaN encoding mode requested by a binary invoked. Ensure that the setting of the bit in the binary matches one in any intepreter used. Set the thread's initial FCSR contents according to the value of the EF_MIPS_NAN2008. Set the values of the FCSR ABS2008 and NAN2008 bits both to the same value if possible, to take the approach taken with existing FPU hardware into account. As of now all implementations have both bits hardwired to the same value, that is both are fixed at 0 or both are fixed at 1, even though the architecture allows for implementations where the amount of control implemented with each of these two individual bits is independent of each other. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11479/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* ELF: Also pass any interpreter's file header to `arch_check_elf'Maciej W. Rozycki2016-01-203-3/+7
| | | | | | | | | | | | | | Also pass any interpreter's file header to `arch_check_elf' so that any architecture handler can have a look at it if needed. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11478/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: math-emu: Add IEEE Std 754-2008 NaN encoding emulationMaciej W. Rozycki2016-01-2011-42/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement IEEE Std 754-2008 NaN encoding wired to the state of the FCSR.NAN2008 bit. Make the interpretation of the quiet bit in NaN data as follows: * in the legacy mode originally defined by the MIPS architecture the value of 1 denotes an sNaN whereas the value of 0 denotes a qNaN, * in the 2008 mode introduced with revision 5 of the MIPS architecture the value of 0 denotes an sNaN whereas the value of 1 denotes a qNaN, following the definition of the preferred NaN encoding introduced with IEEE Std 754-2008. In the 2008 mode, following the requirement of the said standard, quiet an sNaN where needed by setting the quiet bit to 1 and leaving all the NaN payload bits unchanged. Update format conversion operations according to the rules set by IEEE Std 754-2008 and the MIPS architecture. Specifically: * propagate NaN payload bits through conversions between floating-point formats such that as much information as possible is preserved and specifically a conversion from a narrower format to a wider format and then back to the original format does not change a qNaN payload in any way, * conversions from a floating-point to an integer format where the source is a NaN, infinity or a value that would convert to an integer outside the range of the result format produce, under the default exception handling, the respective values defined by the MIPS architecture. In full FPU emulation set the FIR.HAS2008 bit to 1, however do not make any further FCSR bits writable. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: math-emu: Add IEEE Std 754-2008 ABS.fmt and NEG.fmt emulationMaciej W. Rozycki2016-01-202-26/+50
| | | | | | | | | | | | | | | | | Implement IEEE Std 754-2008 non-arithmetic ABS.fmt and NEG.fmt emulation wired to the state of the FCSR.ABS2008 bit. In the non-arithmetic mode the sign bit is altered according to the operation requested regardless of the datum encoded in the input operand, no other bits are changed, the resulting bit pattern is written to the output operand and no exception is ever signalled. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11476/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Define the legacy-NaN and 2008-NaN featuresMaciej W. Rozycki2016-01-203-0/+11
| | | | | | | | | | | | | | | Allocate CPU option bits and define macros for the legacy-NaN and 2008-NaN IEEE Std 754 MIPS architecture features. Unconditionally mark the legacy-NaN feature as present across hardware and emulated floating-point configurations. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11475/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Use a union to access the ELF file headerMaciej W. Rozycki2016-01-201-14/+26
| | | | | | | | | | | | | Rewrite `arch_elf_pt_proc' and `arch_check_elf' using a union to access the ELF file header. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11474/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MAINTAINERS: add myself as Ralink MIPS architecture maintainerJohn Crispin2016-01-201-0/+6
| | | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11998/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MAINTAINERS: Add myself as Lantiq MIPS architecture maintainerJohn Crispin2016-01-201-0/+6
| | | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11997/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: pci: Add MT7620a PCIE driverJohn Crispin2016-01-203-0/+428
| | | | | | | | | | | | | The "a" version of the MT7620 has single port PCIE bus. The driver is straightforward without any special magic required. The driver works on MT7620 and MT7628. There are a few magic values that get written to the pcie phy and a register of which we only know the name. I marked these places as vodoo in the comments above the code. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11996/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: Add a few missing clocksJohn Crispin2016-01-203-0/+5
| | | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11995/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: Fix vendor string for mt7620John Crispin2016-01-201-1/+1
| | | | | | | | | | Ralink was acquired by Mediatek. Represent this in the cpuinfo. It apparently confused people. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11994/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: Fix invalid assignment of SoC typeJohn Crispin2016-01-201-1/+1
| | | | | | | | | | Commit 418d29c87061 ("MIPS: ralink: Unify SoC id handling") introduced broken code. We obviously need to assign the value. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11993/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: fix USB frequency scalingJohn Crispin2016-01-201-1/+1
| | | | | | | | | | | Commit 418d29c87061 ("MIPS: ralink: Unify SoC id handling") was not fully correct. The logic for the SoC check got inverted. We need to check if it is not a MT76x8. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11992/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: MT7688 pinmux fixesJohn Crispin2016-01-201-30/+50
| | | | | | | | | | A few fixes to the pinmux data, 2 new muxes and a minor whitespace cleanup. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11991/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: add MT7621 supportJohn Crispin2016-01-209-1/+410
| | | | | | | | | | | MT7621 is based on a 1004k core. This patch adds support for the SoC. The timer and IRQ is just boiler plate as GIC has recently been moved to generic places in the kernel and just works. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ralink: add a symbol for INTCJohn Crispin2016-01-202-0/+6
| | | | | | | | | | Some of the newer SoCs use the GIC. This patch splits the INTC out into its own symbol, allowing us to add the gic code in the following patch. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11989/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Documentation: DT: net: add docs for ralink/mediatek SoC ethernet bindingJohn Crispin2016-01-203-0/+119
| | | | | | | | | | | | | | | | | | | | | Add three files. ralink,rt2880-net.txt descibes the actual frame engine and the other two describe the switch forntend bindings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Michael Lee <igvtee@gmail.com> Cc: devicetree@vger.kernel.org Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-mediatek@lists.infradead.org Cc: John Crispin <blogic@openwrt.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: Michael Lee <igvtee@gmail.com> Cc: steven.liu@mediatek.com Cc: Fred.Chang@mediatek.com Patchwork: https://patchwork.linux-mips.org/patch/11970/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Support SPROM prefixes on other platformsRafał Miłecki2016-01-201-3/+9
| | | | | | | | | | | | | | | BCM47XX platform has specific PCI setup because all buses share the same domain. It's different e.g. on ARM ARCH_BCM_5301X where each PCI bus gets its own domain (they are handled by iProc PCIe controller driver). As we want to make SPROM driver more generic, let's add an exception for BCM47xx. It was tested on BCM4706 (MIPS) and BCM4708A0 (ARM). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11969/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: dts: jz4780/ci20: Add NEMC, BCH and NAND device tree nodesAlex Smith2016-01-042-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add device tree nodes for the NEMC and BCH to the JZ4780 device tree, and make use of them in the Ci20 device tree to add a node for the board's NAND. Note that since the pinctrl driver is not yet upstream, this includes neither pin configuration nor busy/write-protect GPIO pins for the NAND. Use of the NAND relies on the boot loader to have left the pins configured in a usable state, which should be the case when booted from the NAND. [ralf@linux-mips.org: fold in Geert Uytterhoeven's patch and acks from Harvey's latest version.] Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: linux-mtd@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/11695/ Patchwork: https://patchwork.linux-mips.org/patch/11914/ Patchwork: https://patchwork.linux-mips.org/patch/11985/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: bmips: Support SMP on BCM63168Simon Arlott2016-01-041-0/+1
| | | | | | | | | | | | The BCM63168 requires the same CPU1 fix as BCM6368. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/11487/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Remove some unused code from setup.cAlban Bedel2016-01-041-10/+1
| | | | | | | | | | | | | | Remove the unused defines for the reference clocks rate and the useless machine init function. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11505/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Allow using ath79_ddr_wb_flush() from driversAlban Bedel2016-01-042-1/+1
| | | | | | | | | | | | | | | | | | Move the declaration of ath79_ddr_wb_flush() to asm/mach-ath79/ath79.h to allow using it from drivers. This is needed to move the CPU IRQ driver to drivers/irqchip. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alexander Couzens <lynxis@fe80.eu> Cc: Joel Porquet <joel@porquet.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11502/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 20:03:16 +0100