summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* tools/power turbostat: harden against cpu hotplugLen Brown2020-10-231-9/+14
| | | | | | | | | | | | | | | | turbostat tends to get confused when CPUs are added and removed while it is running. There are races, such as checking the current cpu, and then reading a sysfs file that depends on that cpu number. Close the two issues that seem to come up the most. First, there is an infinite reset loop detector -- change that to allow more resets before giving up. Secondly, one of those file reads didn't really need to exit the program on failure... Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: adjust for temperature offsetLen Brown2020-10-231-33/+29
| | | | | | | | | | cpu1: MSR_IA32_TEMPERATURE_TARGET: 0x05640000 (95 C) (100 default - 5 offset) Account for the new "offset" field in MSR_TEMPERATURE_TARGET. While this field is usually zero, ignoring it results in over-stating the current temperature, both per-core and per-package. Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Build with _FILE_OFFSET_BITS=64Alexander Monakov2020-09-031-0/+1
| | | | | | | | | | | For compatibility reasons, Glibc off_t is a 32-bit type on 32-bit x86 unless _FILE_OFFSET_BITS=64 is defined. Add this define, as otherwise reading MSRs with index 0x80000000 and above attempts a pread with a negative offset, which fails. Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Tested-by: Liwei Song <liwei.song@windriver.com> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Support AMD Family 19hKim Phillips2020-09-031-23/+11
| | | | | | | | | | | | | | | | | | Family 19h processors have the same RAPL (Running average power limit) hardware register interface as Family 17h processors. Change the family checks to succeed for Family 17h and above to enable core and package energy measurement on Family 19h machines. Also update the TDP to the largest found at the bottom of the page at amd.com->processors->servers->epyc->2nd-gen-epyc, i.e., the EPYC 7H12. Signed-off-by: Kim Phillips <kim.phillips@amd.com> Cc: Len Brown <len.brown@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Remove empty columns for JacobsvilleAntti Laakso2020-09-031-3/+30
| | | | | | | | | Jacobsville doesn't have Package C2 and C6. Also Core and DRAM RAPL are not available. Adjust output accordingly. Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Add a new GFXAMHz column that exposes gt_act_freq_mhz.Rafael Antognolli2020-09-031-0/+50
| | | | | | | | | | The column already present called GFXMHz reads from gt_cur_freq_mhz, which represents the GT frequency that was requested, but power management might not be able to do that. So the new column will display what the actual frequency GT is running at. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power x86_energy_perf_policy: Input/output error in a VMOndřej Lysoněk2020-09-031-13/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I've encountered an issue with x86_energy_perf_policy. If I run it on a machine that I'm told is a qemu-kvm virtual machine running inside a privileged container, I get the following error: x86_energy_perf_policy: /dev/cpu/0/msr offset 0x1ad read failed: Input/output error I get the same error in a Digital Ocean droplet, so that might be a similar environment. I created the following patch which is intended to give a more user-friendly message. It's based on a patch for turbostat from Prarit Bhargava that was posted some time ago. The patch is "[v2] turbostat: Running on virtual machine is not supported" [1]. Given my limited knowledge of the topic, I can't say with confidence that this is the right solution, though (that's why this is not an official patch submission). Also, I'm not sure what the convention with exit codes is in this tool. Also, instead of the error message, perhaps the tool should just not print anything in this case, which is how it behaves in a "regular" VM? [1] https://patchwork.kernel.org/patch/9868587/ Signed-off-by: Ondřej Lysoněk <olysonek@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Skip pc8, pc9, pc10 columns, if they are disabledLen Brown2020-09-031-3/+6
| | | | | | | | Like we skip PC3 and PC6 columns when the package C-state limit disables them, skip PC8/PC9/CP10 under analogous conditions. Reported-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Support additional CPU model numbersLen Brown2020-09-031-0/+4
| | | | | | Initial support for models recently added to intel-family.h. Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Fix output formatting for ACPI CST enumerationDavid Arcari2020-09-031-0/+20
| | | | | | | | | | | | turbostat formatting is broken with ACPI CST for enumeration. The problem is that the CX_ACPI% is eight characters long which does not work with tab formatting. One simple solution is to remove the underbar from the state name such that C1_ACPI will be displayed as C1ACPI. Signed-off-by: David Arcari <darcari@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Replace HTTP links with HTTPS ones: TURBOSTAT UTILITYAlexander A. Klimov2020-09-031-1/+1
| | | | | | | | | | | | | | | | | | | | Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Use sched_getcpu() instead of hardcoded cpu 0Prarit Bhargava2020-09-031-3/+10
| | | | | | | | | | | Disabling cpu 0 results in an error turbostat: /sys/devices/system/cpu/cpu0/topology/thread_siblings: open failed: No such file or directory Use sched_getcpu() instead of a hardcoded cpu 0 to get the max cpu number. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Enable accumulate RAPL displayChen Yu2020-09-031-22/+16
| | | | | | | Enable the accumulated RAPL display by default. Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Introduce functions to accumulate RAPL consumptionChen Yu2020-09-032-7/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the RAPL Joule Counter is 32 bit, turbostat would only print a *star* instead of printing the actual energy consumed to indicate the overflow due to long duration. This does not meet the requirement from servers as the sampling time of turbostat is usually very long on servers. So maintain a set of MSR buffer, and update them periodically before the 32bit MSR register is wrapped round, so as to avoid the overflow. The idea is similar to the implementation of ktime_get(): Periodical MSR timer: total_rapl_sum += (current_rapl_msr - last_rapl_msr); Using get_msr_sum() to get the accumulated RAPL: return (current_rapl_msr - last_rapl_msr) + total_rapl_sum; The accumulated RAPL mechanism will be turned on in next patch. Originally-by: Aaron Lu <aaron.lwe@gmail.com> Reviewed-by: Doug Smythies <dsmythies@telus.net> Tested-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Make the energy variable to be 64 bitChen Yu2020-09-031-17/+13
| | | | | | | | | Change the energy variable from 32bit to 64bit, so that it can record long time duration. After this conversion, adjust the DELTA_WRAP32() accordingly. Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Always print idle in the system configuration headerDoug Smythies2020-09-031-3/+0
| | | | | | | | | | | | | If the --quiet option is not used, turbostat prints a useful system configuration header during startup. But inclusion of idle system configuration information in this header is currently a function of inclusion in the columns chosen to be displayed. Always list this idle system configuration. Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Len Brown <len.brown@intel.com>
* tools/power turbostat: Print /dev/cpu_dma_latencyLen Brown2020-09-031-0/+28
| | | | | | | | | Users are puzzled when they use tuned performance and all their C-states vanish. Dump /dev/cpu_dma_latency and state whether the value is default, or constraining, to explain this situation. Signed-off-by: Len Brown <len.brown@intel.com>
* x86/cpu: Add Lakefield, Alder Lake and Rocket Lake models to the to Intel ↵Tony Luck2020-07-251-0/+7
| | | | | | | | | | CPU family Add three new Intel CPU models. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200721043749.31567-1-tony.luck@intel.com
* Merge tag 'v5.8-rc6' into x86/cpu, to refresh the branch before adding new ↵Ingo Molnar2020-07-251803-9119/+16212
|\ | | | | | | | | | | commits Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * Linux 5.8-rc6v5.8-rc6Linus Torvalds2020-07-201-1/+1
| |
| * Merge tag 'perf-tools-fixes-2020-07-19' of ↵Linus Torvalds2020-07-193-6/+14
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into master Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI. - Set opt->set in libsubcmd's OPT_CALLBACK_SET(). This fixes 'perf record --switch-output-event event-name' usage" * tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools arch kvm: Sync kvm headers with the kernel sources perf tools: Sync hashmap.h with libbpf's libsubcmd: Fix OPT_CALLBACK_SET()
| | * tools arch kvm: Sync kvm headers with the kernel sourcesArnaldo Carvalho de Melo2020-07-171-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To pick up the changes from: 83d31e5271ac ("KVM: nVMX: fixes for preemption timer migration") That don't entail changes in tooling. This silences these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * perf tools: Sync hashmap.h with libbpf'sArnaldo Carvalho de Melo2020-07-171-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To pick up the changes in: b2f9f1535bb9 ("libbpf: Fix libbpf hashmap on (I)LP32 architectures") Silencing this warning: Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h' diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h I'll eventually update the warning to remove the "Kernel ABI" part and instead state libbpf when noticing that the original is at "tools/lib/something". Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Jakub Bogusz <qboosh@pld-linux.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Ian Rogers <irogers@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| | * libsubcmd: Fix OPT_CALLBACK_SET()Ravi Bangoria2020-07-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Any option macro with _SET suffix should set opt->set variable which is not happening for OPT_CALLBACK_SET(). This is causing issues with perf record --switch-output-event. Fix that. Before: # ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \ --switch-output-event syscalls:sys_enter_mmap ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.297 MB perf.data (657 samples) ] After: $ ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \ --switch-output-event syscalls:sys_enter_mmap [ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144542 ] [ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144608 ] [ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144660 ] ^C[ perf record: dump data: Woken up 1 times ] [ perf record: Dump perf.data.2020061918144784 ] [ perf record: Woken up 0 times to write data ] [ perf record: Dump perf.data.2020061918144803 ] [ perf record: Captured and wrote 0.419 MB perf.data.<timestamp> ] Fixes: 636eb4d001b1 ("libsubcmd: Introduce OPT_CALLBACK_SET()") Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20200619133412.50705-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
| * | Merge tag 'x86-urgent-2020-07-19' of ↵Linus Torvalds2020-07-1912-37/+66
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull x86 fixes from Thomas Gleixner: "A pile of fixes for x86: - Fix the I/O bitmap invalidation on XEN PV, which was overlooked in the recent ioperm/iopl rework. This caused the TSS and XEN's I/O bitmap to get out of sync. - Use the proper vectors for HYPERV. - Make disabling of stack protector for the entry code work with GCC builds which enable stack protector by default. Removing the option is not sufficient, it needs an explicit -fno-stack-protector to shut it off. - Mark check_user_regs() noinstr as it is called from noinstr code. The missing annotation causes it to be placed in the text section which makes it instrumentable. - Add the missing interrupt disable in exc_alignment_check() - Fixup a XEN_PV build dependency in the 32bit entry code - A few fixes to make the Clang integrated assembler happy - Move EFI stub build to the right place for out of tree builds - Make prepare_exit_to_usermode() static. It's not longer called from ASM code" * tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Don't add the EFI stub to targets x86/entry: Actually disable stack protector x86/ioperm: Fix io bitmap invalidation on Xen PV x86: math-emu: Fix up 'cmp' insn for clang ias x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV x86/entry: Add compatibility with IAS x86/entry/common: Make prepare_exit_to_usermode() static x86/entry: Mark check_user_regs() noinstr x86/traps: Disable interrupts in exc_aligment_check() x86/entry/32: Fix XEN_PV build dependency
| | * | x86/boot: Don't add the EFI stub to targetsArvind Sankar2020-07-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vmlinux-objs-y is added to targets, which currently means that the EFI stub gets added to the targets as well. It shouldn't be added since it is built elsewhere. This confuses Makefile.build which interprets the EFI stub as a target $(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a and will create drivers/firmware/efi/libstub/ underneath arch/x86/boot/compressed, to hold this supposed target, if building out-of-tree. [0] Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y. [0] See scripts/Makefile.build near the end: # Create directories for object files if they do not exist Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
| | * | x86/entry: Actually disable stack protectorKees Cook2020-07-191-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some builds of GCC enable stack protector by default. Simply removing the arguments is not sufficient to disable stack protector, as the stack protector for those GCC builds must be explicitly disabled. Remove the argument removals and add -fno-stack-protector. Additionally include missed x32 argument updates, and adjust whitespace for readability. Fixes: 20355e5f73a7 ("x86/entry: Exclude low level entry code from sanitizing") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/202006261333.585319CA6B@keescook
| | * | x86/ioperm: Fix io bitmap invalidation on Xen PVAndy Lutomirski2020-07-186-17/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tss_invalidate_io_bitmap() wasn't wired up properly through the pvop machinery, so the TSS and Xen's io bitmap would get out of sync whenever disabling a valid io bitmap. Add a new pvop for tss_invalidate_io_bitmap() to fix it. This is XSA-329. Fixes: 22fe5b0439dd ("x86/ioperm: Move TSS bitmap update to exit to user work") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org
| | * | x86: math-emu: Fix up 'cmp' insn for clang iasArnd Bergmann2020-07-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clang integrated assembler requires the 'cmp' instruction to have a length prefix here: arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl') cmp $0xffffffff,-24(%ebp) ^ Make this a 32-bit comparison, which it was clearly meant to be. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de
| | * | x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERVSedat Dilek2020-07-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When assembling with Clang via `make LLVM_IAS=1` and CONFIG_HYPERV enabled, we observe the following error: <instantiation>:9:6: error: expected absolute expression .if HYPERVISOR_REENLIGHTENMENT_VECTOR == 3 ^ <instantiation>:1:1: note: while in macro instantiation idtentry HYPERVISOR_REENLIGHTENMENT_VECTOR asm_sysvec_hyperv_reenlightenment sysvec_hyperv_reenlightenment has_error_code=0 ^ ./arch/x86/include/asm/idtentry.h:627:1: note: while in macro instantiation idtentry_sysvec HYPERVISOR_REENLIGHTENMENT_VECTOR sysvec_hyperv_reenlightenment; ^ <instantiation>:9:6: error: expected absolute expression .if HYPERVISOR_STIMER0_VECTOR == 3 ^ <instantiation>:1:1: note: while in macro instantiation idtentry HYPERVISOR_STIMER0_VECTOR asm_sysvec_hyperv_stimer0 sysvec_hyperv_stimer0 has_error_code=0 ^ ./arch/x86/include/asm/idtentry.h:628:1: note: while in macro instantiation idtentry_sysvec HYPERVISOR_STIMER0_VECTOR sysvec_hyperv_stimer0; This is caused by typos in arch/x86/include/asm/idtentry.h: HYPERVISOR_REENLIGHTENMENT_VECTOR -> HYPERV_REENLIGHTENMENT_VECTOR HYPERVISOR_STIMER0_VECTOR -> HYPERV_STIMER0_VECTOR For more details see ClangBuiltLinux issue #1088. Fixes: a16be368dd3f ("x86/entry: Convert various hypervisor vectors to IDTENTRY_SYSVEC") Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1088 Link: https://github.com/ClangBuiltLinux/linux/issues/1043 Link: https://lore.kernel.org/patchwork/patch/1272115/ Link: https://lkml.kernel.org/r/20200714194740.4548-1-sedat.dilek@gmail.com
| | * | x86/entry: Add compatibility with IASJian Cai2020-07-161-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clang's integrated assembler does not allow symbols with non-absolute values to be reassigned. Modify the interrupt entry loop macro to be compatible with IAS by using a label and an offset. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Brian Gerst <brgerst@gmail.com> Suggested-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Jian Cai <caij2003@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Link: https://github.com/ClangBuiltLinux/linux/issues/1043 Link: https://lkml.kernel.org/r/20200714233024.1789985-1-caij2003@gmail.com
| | * | x86/entry/common: Make prepare_exit_to_usermode() staticThomas Gleixner2020-07-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No users outside this file anymore. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200708192934.301116609@linutronix.de
| | * | x86/entry: Mark check_user_regs() noinstrThomas Gleixner2020-07-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's called from the non-instrumentable section. Fixes: c9c26150e61d ("x86/entry: Assert that syscalls are on the right stack") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200708192934.191497962@linutronix.de
| | * | x86/traps: Disable interrupts in exc_aligment_check()Thomas Gleixner2020-07-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | exc_alignment_check() fails to disable interrupts before returning to the entry code. Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code") Reported-by: syzbot+0889df9502bc0f112b31@syzkaller.appspotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200708192934.076519438@linutronix.de
| | * | x86/entry/32: Fix XEN_PV build dependencyIngo Molnar2020-07-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xenpv_exc_nmi() and xenpv_exc_debug() are only defined on 64-bit kernels, but they snuck into the 32-bit build via <asm/identry.h>, causing the link to fail: ld: arch/x86/entry/entry_32.o: in function `asm_xenpv_exc_nmi': (.entry.text+0x817): undefined reference to `xenpv_exc_nmi' ld: arch/x86/entry/entry_32.o: in function `asm_xenpv_exc_debug': (.entry.text+0x827): undefined reference to `xenpv_exc_debug' Only use them on 64-bit kernels. Fixes: f41f0824224e: ("x86/entry/xen: Route #DB correctly on Xen PV") Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | Merge tag 'timers-urgent-2020-07-19' of ↵Linus Torvalds2020-07-191-5/+16
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull timer fixes from Thomas Gleixner: "Two fixes for the timer wheel: - A timer which is already expired at enqueue time can set the base->next_expiry value backwards. As a consequence base->clk can be set back as well. This can lead to timers expiring early. Add a sanity check to prevent this. - When a timer is queued with an expiry time beyond the wheel capacity then it should be queued in the bucket of the last wheel level which is expiring last. The code adjusted the expiry time to the maximum wheel capacity, which is only correct when the wheel clock is 0. Aside of that the check whether the delta is larger than wheel capacity does not check the delta, it checks the expiry value itself. As a result timers can expire at random. Fix this by checking the right variable and adjust expiry time so it becomes base->clock plus capacity which places it into the outmost bucket in the last wheel level" * tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer: Fix wheel index calculation on last level timer: Prevent base->clk from moving backward
| | * | | timer: Fix wheel index calculation on last levelFrederic Weisbecker2020-07-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an expiration delta falls into the last level of the wheel, that delta has be compared against the maximum possible delay and reduced to fit in if necessary. However instead of comparing the delta against the maximum, the code compares the actual expiry against the maximum. Then instead of fixing the delta to fit in, it sets the maximum delta as the expiry value. This can result in various undesired outcomes, the worst possible one being a timer expiring 15 days ahead to fire immediately. Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200717140551.29076-2-frederic@kernel.org
| | * | | timer: Prevent base->clk from moving backwardFrederic Weisbecker2020-07-091-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a timer is enqueued with a negative delta (ie: expiry is below base->clk), it gets added to the wheel as expiring now (base->clk). Yet the value that gets stored in base->next_expiry, while calling trigger_dyntick_cpu(), is the initial timer->expires value. The resulting state becomes: base->next_expiry < base->clk On the next timer enqueue, forward_timer_base() may accidentally rewind base->clk. As a possible outcome, timers may expire way too early, the worst case being that the highest wheel levels get spuriously processed again. To prevent from that, make sure that base->next_expiry doesn't get below base->clk. Fixes: a683f390b93f ("timers: Forward the wheel clock whenever possible") Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Tested-by: Juri Lelli <juri.lelli@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200703010657.2302-1-frederic@kernel.org
| * | | | Merge tag 'sched-urgent-2020-07-19' of ↵Linus Torvalds2020-07-193-22/+66
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull scheduler fixes from Thomas Gleixner: "A set of scheduler fixes: - Plug a load average accounting race which was introduced with a recent optimization casing load average to show bogus numbers. - Fix the rseq CPU id initialization for new tasks. sched_fork() does not update the rseq CPU id so the id is the stale id of the parent task, which can cause user space data corruption. - Handle a 0 return value of task_h_load() correctly in the load balancer, which does not decrease imbalance and therefore pulls until the maximum number of loops is reached, which might be all tasks just created by a fork bomb" * tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: handle case of task_h_load() returning 0 sched: Fix unreliable rseq cpu_id for new tasks sched: Fix loadavg accounting race
| | * | | | sched/fair: handle case of task_h_load() returning 0Vincent Guittot2020-07-161-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | task_h_load() can return 0 in some situations like running stress-ng mmapfork, which forks thousands of threads, in a sched group on a 224 cores system. The load balance doesn't handle this correctly because env->imbalance never decreases and it will stop pulling tasks only after reaching loop_max, which can be equal to the number of running tasks of the cfs. Make sure that imbalance will be decreased by at least 1. misfit task is the other feature that doesn't handle correctly such situation although it's probably more difficult to face the problem because of the smaller number of CPUs and running tasks on heterogenous system. We can't simply ensure that task_h_load() returns at least one because it would imply to handle underflow in other places. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: <stable@vger.kernel.org> # v4.4+ Link: https://lkml.kernel.org/r/20200710152426.16981-1-vincent.guittot@linaro.org
| | * | | | sched: Fix unreliable rseq cpu_id for new tasksMathieu Desnoyers2020-07-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While integrating rseq into glibc and replacing glibc's sched_getcpu implementation with rseq, glibc's tests discovered an issue with incorrect __rseq_abi.cpu_id field value right after the first time a newly created process issues sched_setaffinity. For the records, it triggers after building glibc and running tests, and then issuing: for x in {1..2000} ; do posix/tst-affinity-static & done and shows up as: error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 2, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 error: Unexpected CPU 138, expected 0 This is caused by the scheduler invoking __set_task_cpu() directly from sched_fork() and wake_up_new_task(), thus bypassing rseq_migrate() which is done by set_task_cpu(). Add the missing rseq_migrate() to both functions. The only other direct use of __set_task_cpu() is done by init_idle(), which does not involve a user-space task. Based on my testing with the glibc test-case, just adding rseq_migrate() to wake_up_new_task() is sufficient to fix the observed issue. Also add it to sched_fork() to keep things consistent. The reason why this never triggered so far with the rseq/basic_test selftest is unclear. The current use of sched_getcpu(3) does not typically require it to be always accurate. However, use of the __rseq_abi.cpu_id field within rseq critical sections requires it to be accurate. If it is not accurate, it can cause corruption in the per-cpu data targeted by rseq critical sections in user-space. Reported-By: Florian Weimer <fweimer@redhat.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-By: Florian Weimer <fweimer@redhat.com> Cc: stable@vger.kernel.org # v4.18+ Link: https://lkml.kernel.org/r/20200707201505.2632-1-mathieu.desnoyers@efficios.com
| | * | | | sched: Fix loadavg accounting racePeter Zijlstra2020-07-082-20/+51
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent commit: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") moved these lines in ttwu(): p->sched_contributes_to_load = !!task_contributes_to_load(p); p->state = TASK_WAKING; up before: smp_cond_load_acquire(&p->on_cpu, !VAL); into the 'p->on_rq == 0' block, with the thinking that once we hit schedule() the current task cannot change it's ->state anymore. And while this is true, it is both incorrect and flawed. It is incorrect in that we need at least an ACQUIRE on 'p->on_rq == 0' to avoid weak hardware from re-ordering things for us. This can fairly easily be achieved by relying on the control-dependency already in place. The second problem, which makes the flaw in the original argument, is that while schedule() will not change prev->state, it will read it a number of times (arguably too many times since it's marked volatile). The previous condition 'p->on_cpu == 0' was sufficient because that indicates schedule() has completed, and will no longer read prev->state. So now the trick is to make this same true for the (much) earlier 'prev->on_rq == 0' case. Furthermore, in order to make the ordering stick, the 'prev->on_rq = 0' assignment needs to he a RELEASE, but adding additional ordering to schedule() is an unwelcome proposition at the best of times, doubly so for mere accounting. Luckily we can push the prev->state load up before rq->lock, with the only caveat that we then have to re-read the state after. However, we know that if it changed, we no longer have to worry about the blocking path. This gives us the required ordering, if we block, we did the prev->state load before an (effective) smp_mb() and the p->on_rq store needs not change. With this we end up with the effective ordering: LOAD p->state LOAD-ACQUIRE p->on_rq == 0 MB STORE p->on_rq, 0 STORE p->state, TASK_WAKING which ensures the TASK_WAKING store happens after the prev->state load, and all is well again. Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by: Dave Jones <davej@codemonkey.org.uk> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Dave Jones <davej@codemonkey.org.uk> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Link: https://lkml.kernel.org/r/20200707102957.GN117543@hirez.programming.kicks-ass.net
| * | | | Merge tag 'irq-urgent-2020-07-19' of ↵Linus Torvalds2020-07-1911-42/+76
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull irq fixes from Thomas Gleixner: "Two fixes for the interrupt subsystem: - Make the handling of the firmware node consistent and do not free the node after the domain has been created successfully. The core code stores a pointer to it which can lead to a use after free or double free. This used to "work" because the pointer was not stored when the initial code was written, but at some point later it was required to store it. Of course nobody noticed that the existing users break that way. - Handle affinity setting on inactive interrupts correctly when hierarchical irq domains are enabled. When interrupts are inactive with the modern hierarchical irqdomain design, the interrupt chips are not necessarily in a state where affinity changes can be handled. The legacy irq chip design allowed this because interrupts are immediately fully initialized at allocation time. X86 has a hacky workaround for this, but other implementations do not. This cased malfunction on GIC-V3. Instead of playing whack a mole to find all affected drivers, change the core code to store the requested affinity setting and then establish it when the interrupt is allocated, which makes the X86 hack go away" * tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Handle affinity setting on inactive interrupts correctly irqdomain/treewide: Keep firmware node unconditionally allocated
| | * | | | genirq/affinity: Handle affinity setting on inactive interrupts correctlyThomas Gleixner2020-07-172-19/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting interrupt affinity on inactive interrupts is inconsistent when hierarchical irq domains are enabled. The core code should just store the affinity and not call into the irq chip driver for inactive interrupts because the chip drivers may not be in a state to handle such requests. X86 has a hacky workaround for that but all other irq chips have not which causes problems e.g. on GIC V3 ITS. Instead of adding more ugly hacks all over the place, solve the problem in the core code. If the affinity is set on an inactive interrupt then: - Store it in the irq descriptors affinity mask - Update the effective affinity to reflect that so user space has a consistent view - Don't call into the irq chip driver This is the core equivalent of the X86 workaround and works correctly because the affinity setting is established in the irq chip when the interrupt is activated later on. Note, that this is only effective when hierarchical irq domains are enabled by the architecture. Doing it unconditionally would break legacy irq chip implementations. For hierarchial irq domains this works correctly as none of the drivers can have a dependency on affinity setting in inactive state by design. Remove the X86 workaround as it is not longer required. Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts") Reported-by: Ali Saidi <alisaidi@amazon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ali Saidi <alisaidi@amazon.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
| | * | | | irqdomain/treewide: Keep firmware node unconditionally allocatedThomas Gleixner2020-07-1410-23/+36
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after creating the irqdomain. The only purpose of these FW nodes is to convey name information. When this was introduced the core code did not store the pointer to the node in the irqdomain. A recent change stored the firmware node pointer in irqdomain for other reasons and missed to notice that the usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence are broken by this. Storing a dangling pointer is dangerous itself, but in case that the domain is destroyed later on this leads to a double free. Remove the freeing of the firmware node after creating the irqdomain from all affected call sites to cure this. Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
| * | | | Merge tag 'usb-5.8-rc6' of ↵Linus Torvalds2020-07-1916-40/+86
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into master Pull USB fixes from Greg KH: "Here are a few small USB fixes, and one thunderbolt fix, for 5.8-rc6. Nothing huge in here, just the normal collection of gadget, dwc2/3, serial, and other minor USB driver fixes and id additions. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: iuu_phoenix: fix memory corruption USB: c67x00: fix use after free in c67x00_giveback_urb usb: gadget: function: fix missing spinlock in f_uac1_legacy usb: gadget: udc: atmel: fix uninitialized read in debug printk usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable() usb: dwc2: Fix shutdown callback in platform usb: cdns3: trace: fix some endian issues usb: cdns3: ep0: fix some endian issues usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init() usb: gadget: fix langid kernel-doc warning in usbstring.c usb: dwc3: pci: add support for the Intel Jasper Lake usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant usb: chipidea: core: add wakeup support for extcon USB: serial: option: add Quectel EG95 LTE modem thunderbolt: Fix path indices used in USB3 tunnel discovery USB: serial: ch341: add new Product ID for CH340 USB: serial: option: add GosunCn GM500 series USB: serial: cypress_m8: enable Simply Automated UPB PIM
| | * \ \ \ Merge tag 'usb-serial-5.8-rc6' of ↵Greg Kroah-Hartman2020-07-161-3/+5
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.8-rc6 Here's a fix for 5.8 addressing a long-standing bug in iuu_phoenix. * tag 'usb-serial-5.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: iuu_phoenix: fix memory corruption
| | | * | | | USB: serial: iuu_phoenix: fix memory corruptionJohan Hovold2020-07-161-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0f1f2 ("tty: iuu_phoenix: fix locking.") Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org>
| | * | | | | Merge tag 'fixes-for-v5.8-rc3' of ↵Greg Kroah-Hartman2020-07-108-30/+38
| | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.8-rc3 Adding support for recent Intel devices (Tiger Lake and Jasper Lake) on dwc3. We have some endianess fixes in cdns3, a memleak fix in gr_udc and lock API usage fix in the legacy f_uac1 Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'fixes-for-v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: gadget: function: fix missing spinlock in f_uac1_legacy usb: gadget: udc: atmel: fix uninitialized read in debug printk usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable() usb: dwc2: Fix shutdown callback in platform usb: cdns3: trace: fix some endian issues usb: cdns3: ep0: fix some endian issues usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init() usb: gadget: fix langid kernel-doc warning in usbstring.c usb: dwc3: pci: add support for the Intel Jasper Lake usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
| | | * | | | | usb: gadget: function: fix missing spinlock in f_uac1_legacyZhang Qiang2020-07-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a missing spinlock protection for play_queue, because the play_queue may be destroyed when the "playback_work" work func and "f_audio_out_ep_complete" callback func operate this paly_queue at the same time. Fixes: c6994e6f067cf ("USB: gadget: add USB Audio Gadget driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Zhang Qiang <qiang.zhang@windriver.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 18:52:44 +0100