summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: AM33XX: Add volume-keys device tree data to am335x-evmAnilKumar Ch2012-11-061-0/+21
| | | | | | | | Add gpio based volume keys device tree data to am335x-evm by adding all the required parameters like keycode, gpios and etc. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add pinmux configuration for volume-keys to EVMAnilKumar Ch2012-11-061-1/+8
| | | | | | | | | | | | | Add pinmux configurations for gpio volume keys. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add matrix keypad device tree data to am335x-evmAnilKumar Ch2012-11-061-0/+20
| | | | | | | | Add matrix keypad device tree data to am335x-evm by adding all the necessary parameters like keymap, row & column gpios and etc. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add pinmux configuration for matrix keypad to EVMAnilKumar Ch2012-11-061-0/+15
| | | | | | | | | | | | | Add pinmux configurations for gpio matrix keypad. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5-evm: LPDDR2 memory device details for EVMLokesh Vutla2012-11-052-0/+78
| | | | | | | | | Samsung's K3PE0E000B memory part is used in OMAP5-evm board. Adding timings and geometry details for Samsung's memory part and attaching the same to device-handle of EMIF1/2. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5: EMIF device tree data for OMAP5 boardsLokesh Vutla2012-11-051-0/+22
| | | | | | | Adding EMIF device tree data for OMAP5 boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5-evm: Fix size of memory defined for EVMLokesh Vutla2012-11-051-1/+1
| | | | | | | | Memory present for OMAP5-evm is 2GB. But in dts file it is specified as 1GB. Correcting the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: OMAP5: Add counter nodeJon Hunter2012-11-011-0/+6
| | | | | | | Add the 32kHz counter node for OMAP5 devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: OMAP5: Add timer nodesJon Hunter2012-11-011-0/+89
| | | | | | | Add the 11 timer nodes for OMAP5 devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: OMAP4: Update timer addressesJon Hunter2012-11-011-8/+12
| | | | | | | | | | | For OMAP4 devices, timers 5-8 have both a L3 bus address and a Cortex-A9 private bus address. Currently the device-tree source only contains the L3 bus address for these timers. Update these timers to include the Cortex-A9 private address and make the default address the Cortex-A9 private bus address to match the current HWMOD implementation. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add SPI nodePhilip, Avinash2012-11-011-0/+22
| | | | | | | | | | Add McSPI data node to AM33XX device tree file. The McSPI module (and so as the driver) is reused from OMAP4. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Tested-by: Matt Porter <mporter@ti.com> [b-cousson@ti.com: Remove interrupt-parent] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add rtc nodeAfzal Mohammed2012-10-311-0/+8
| | | | | | | | Add am33xx rtc node. Signed-off-by: Afzal Mohammed <afzal@ti.com> [b-cousson@ti.com: Update the subject] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: OMAP: Rename pandaES and var_som for consistencyBenoit Cousson2012-10-293-2/+2
| | | | | | | | Rename the files to have names consistent across OMAP boards. Update the Makefile to use the new name. Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5: Update MMC with address space and interruptsSebastien Guiriec2012-10-291-0/+10
| | | | | | | | Add base address and interrupt line inside Device Tree data for OMAP5. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5: Update UART with address space and interruptsSebastien Guiriec2012-10-291-2/+14
| | | | | | | | | | | | | Add base address and interrupt line inside Device Tree data for OMAP5. Fix as well the wrong compatible string on UART5 & 6. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> [b-cousson@ti.com: Update the changelog to reflect the fixes done in the patch] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5: Update I2C with address space and interruptsSebastien Guiriec2012-10-291-2/+12
| | | | | | | | | Add base address and interrupt line inside Device Tree data for OMAP5 Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5: Update GPIO with address space and interruptsSebastien Guiriec2012-10-291-0/+16
| | | | | | | | Add base address and interrupt line inside Device Tree data for OMAP5. Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: OMAP: Add counter-32k nodesJon Hunter2012-10-295-0/+39
| | | | | | | | Adds the counter-32k timers nodes present in OMAP2/3/4 devices and device-tree binding documentation for OMAP counter-32k. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: OMAP: Add timer nodesJon Hunter2012-10-297-0/+367
| | | | | | | | | | | | | | | | | | | | | | Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. V5 changes: - Updated timer register sizes for OMAP2/3/4. - Modified AM335x timer register size to be 1KB instead of 4KB to align with HWMOD. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-Reviewed-&-Tested-By: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: OMAP: Move interrupt-parent to the root node to avoid duplicationBenoit Cousson2012-10-297-39/+3
| | | | | | | | | | | | | The interrupt-parent attribute does not have to be added in each node since the fmwk will check for the parent as well to get it. Create an interrupt-parent for OMAP2, OMAP3, AM33xx and remove the attributes from every nodes that were using it. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Sebastien Guiriec <s-guiriec@ti.com>
* ARM: dts: OMAP4: add *reg* property for ocp2scpKishon Vijay Abraham I2012-10-292-1/+20
| | | | | | | | | *reg* property for ocp2scp was previously obtained from ti,hwmods property. But that is now explicitly added to the dt node. Also updated the documentation with *reg* info. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: Add twl4030-usb dataKishon Vijay Abraham I2012-10-291-0/+21
| | | | | | | | | | Add twl4030-usb data node in twl4030 device tree file. twl4030-usb is the phy driver for MUSB used in omap3 chipsets. The dt data is comprised of two interrupts, one for ID and one for VBUS and three phandles to regulator. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: Add twl6030-usb dataKishon Vijay Abraham I2012-10-293-0/+13
| | | | | | | | | | | Add twl6030-usb data node in twl6030 device tree file. twl6030-usb is the comparator driver for USB that detects VBUS and ID events. The dt data is comprised of two interrupts, one for ID and one for VBUS and a phandle to the regulator. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* Documentation: dt: i2c: Update trivial-devices listAnilKumar Ch2012-10-291-0/+2
| | | | | | | | | Update i2c trivial-devices list by adding the description for ti,tmp275 temperature sensor and taos,tsl2550 ambient light sensor. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: Add am335x-evmsk.dtsAnilKumar Ch2012-10-291-0/+166
| | | | | | | | | | | | | | | | | Add AM335X EVM-SK device tree source (am335x-sk.dts) file to use the am33xx.dtsi SoC file, along with the memory node information. Also adds support for tps65910 regulator and lis331dlh accelerometer. Following drivers/functionality were tested on AM335x-EVM-SK. * I2C * TPS65910 regulators * lis331dlh accelerometer AM335x EVM Starter Kit details can be accessed from: http://www.ti.com/tool/tmdssk3358 Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add tsl2550 ambient light sensor DT dataAnilKumar Ch2012-10-291-1/+6
| | | | | | | | | | | | | In AM335x EVM tsl2550 ambient light sensor is connected to I2C2 bus. Add child node inside i2c2 node with i2c slave address. TAOS tsl2550 sensor is using a two-wire SMBus serial interface. Reduce I2C2 clock frequency to 100kHz from 400kHz because the maximum clock frequency of SMBus is 100kHz. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [b-cousson@ti.com: Clean the changelog] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add temperature sensor device tree data to am335x-evmAnilKumar Ch2012-10-291-0/+5
| | | | | | | | | | Add temperature sensor DT data to am335x-evm.dts. In AM335x EVM tmp275 temperature sensor is connected to I2C2 bus. So this patch adds child node inside i2c2 node with i2c slave address. This patch is tested on AM335x EVM. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add lis331dlh device tree data to am335x-evmAnilKumar Ch2012-10-291-0/+39
| | | | | | | | | | Add lis331dlh device tree data to am335x-evm.dts. In AM335x EVM lis331dlh accelerometer is connected to I2C2 bus. So this patch change the status of I2C2 node to "okay" to use I2C2 bus. Also added all the required platform data to am335x-evm. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add D_CAN device tree dataAnilKumar Ch2012-10-291-0/+18
| | | | | | | | | Add Bosch D_CAN controller device tree data to AM33XX dtsi file by adding d_can device nodes with all the necessary parameters. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add basic pinctrl device tree dataAnilKumar Ch2012-10-291-0/+9
| | | | | | | | Adds basic pinctrl device tree data for AM33XX family of devices. This patch is based on the pinctrl-single driver. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Add device tree OPP tableAnilKumar Ch2012-10-293-0/+27
| | | | | | | | | | | | Add DT OPP table for AM33XX family of devices. This data is decoded by OF with of_init_opp_table() helper function. Also adds cpu0 supply name to the corresponding dts files. cpu0-supply name is used by cpufreq-cpu0 driver to get the regulator pointer for voltage modifications. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: Add omap3-beagle.dtsJon Hunter2012-10-294-6/+74
| | | | | | | | | | | | | | | | | | | | | | Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030 power management IC (PMIC) as the Beagle board XM. Given that the Beagle and Beagle-XM boards use the same PMIC, move the definition of the VSIM regulator into the TWL4030.dtsi file so that we do not need to duplicate in the Beagle board dts file. This has been boot tested on an OMAP3530 Beagle board and verifing that the SD/MMC interface is working with a SD card. V2 changes - Rebased upon of devel-dt - Corrected copyright date in omap3-beagle.dts file - Added LED support after verifing that Beagle and Beagle XM have the same LED configuration Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* Linux 3.7-rc3v3.7-rc3Linus Torvalds2012-10-281-1/+1
|
* Merge tag 'ktest-v3.7-rc2' of ↵Linus Torvalds2012-10-281-2/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull ktest confusion fix from Steven Rostedt: "With the v3.7-rc2 kernel, the network cards on my target boxes were not being brought up. I found that the modules for the network was not being installed. This was due to the config CONFIG_MODULES_USE_ELF_RELA that came before CONFIG_MODULES, and confused ktest in thinking that CONFIG_MODULES=y was not found. Ktest needs to test all configs and not just stop if something starts with CONFIG_MODULES." * tag 'ktest-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA
| * ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELASteven Rostedt2012-10-261-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to decide if ktest should bother installing modules on the target box, it checks if the config file has CONFIG_MODULES=y. But it also checks if the '=y' part exists. It only will install modules if the config exists and is set with '=y'. But as the regex that was used tests: /^CONFIG_MODULES(=y)?/ this will also match: CONFIG_MODULES_USE_ELF_RELA as the '=y' part was optional and it did not test the rest of the line. When this happens, ktest will stop checking the rest of the configs but it will also think that no modules are needed to be installed. What it should do is only jump out of the loop if it actually found a CONFIG_MODULES that is set to true. Otherwise, ktest wont install the necessary modules needed for proper booting of the test target. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* | Merge tag 'spi-mxs' of ↵Linus Torvalds2012-10-281-1/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull minor spi MXS fixes from Mark Brown: "These fixes are both pretty minor ones and are driver local." * tag 'spi-mxs' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi: mxs: Terminate DMA in case of DMA timeout spi: mxs: Assign message status after transfer finished
| * | spi: mxs: Terminate DMA in case of DMA timeoutMarek Vasut2012-10-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | In case the SPI DMA times out, the DMA might still be in some kind of inconsistent state. Issue dmaengine_terminate_all() on the particular channel to kill off all operations before continuing. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | spi: mxs: Assign message status after transfer finishedMarek Vasut2012-10-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | In the current code implementing the MXS SPI driver, every transferred message had assigned status = 0, which is not correct. Properly assign status returned from the I/O functions. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | Merge tag 'fixes-for-3.7' of ↵Linus Torvalds2012-10-2856-87/+225
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91. These come a little later than I had hoped but unfortunately we had a few of these patches cause regressions themselves and had to work out how to deal with those in the meantime." * tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) Revert "ARM i.MX25: Fix PWM per clock lookups" ARM: versatile: fix versatile_defconfig ARM: mvebu: update defconfig with 3.7 changes ARM: at91: fix at91x40 build ARM: socfpga: Fix socfpga compilation with early_printk() enabled ARM: SPEAr: Remove unused empty files MAINTAINERS: Add arm-soc tree entry ARM: dts: mxs: add the "clock-names" for gpmi-nand ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ...
| * | | Revert "ARM i.MX25: Fix PWM per clock lookups"Arnd Bergmann2012-10-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 92063cee118655d25b50d04eb77b012f3287357a, it was applied prematurely, causing this build error for imx_v4_v5_defconfig: arch/arm/mach-imx/clk-imx25.c: In function 'mx25_clocks_init': arch/arm/mach-imx/clk-imx25.c:206:26: error: 'pwm_ipg_per' undeclared (first use in this function) arch/arm/mach-imx/clk-imx25.c:206:26: note: each undeclared identifier is reported only once for each function it appears in Sascha Hauer explains: > There are several gates missing in clk-imx25.c. I have a patch which > adds support for them and I seem to have missed that the above depends > on it. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | ARM: versatile: fix versatile_defconfigArnd Bergmann2012-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the introduction of CONFIG_ARCH_MULTIPLATFORM, versatile is no longer the default platform, so we need to enable CONFIG_ARCH_VERSATILE explicitly in order for that to be selected rather than the multiplatform configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | ARM: mvebu: update defconfig with 3.7 changesThomas Petazzoni2012-10-271-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The split of 370 and XP into two Kconfig options and the multiplatform kernel support has changed a few Kconfig symbols, so let's update the mvebu_defconfig file with the latest changes. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | ARM: at91: fix at91x40 buildArnd Bergmann2012-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | patch 738a0fd7 "ARM: at91: fix external interrupts in non-DT case" fixed a run-time error on some at91 platforms but did not apply the same change to at91x40, which now doesn't build. This changes at91x40 in the same way that the other platforms were changed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | | Merge branch 'fixes' of ↵Arnd Bergmann2012-10-261-1/+1
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7779: I/O address abuse cleanup
| | * | | ARM: shmobile: r8a7779: I/O address abuse cleanupKuninori Morimoto2012-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a2a47ca36642e3995e982957bc42678cf11ca6ac (ARM: __io abuse cleanup) cleanuped __io() -> IOMEM(), but setup-r8a7779.c was out of target, since it directly used (void __iomem __force *) instead of __io(). This patch cleanup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
| * | | | Merge branch 'v3.7-samsung-fixes-2' of ↵Arnd Bergmann2012-10-269-2/+55
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim <kgene.kim@samsung.com>: One is spi stuff for fix the device names for the different subtypes of the spi controller. And the other is adding missing .smp field for exynos4-dt and fixing memory sections for exynos4210-trats board. * 'v3.7-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Set .smp field of machine descriptor for exynos4-dt ARM: dts: Split memory into 4 sections for exynos4210-trats ARM: SAMSUNG: Add naming of s3c64xx-spi devices Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | ARM: EXYNOS: Set .smp field of machine descriptor for exynos4-dtTomasz Figa2012-10-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds missing initializer of .smp field of machine descriptor of EXYNOS 4 DT machine. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | | | ARM: dts: Split memory into 4 sections for exynos4210-tratsTomasz Figa2012-10-171-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the maximum section size on mach-exynos is set to 256MiB, boards with memory configuration defined using sections bigger than 256MiB will fail to boot with a kernel panic. This patch modifies the dts file of Samsung Trats board to define four sections of 256MiB instead of two of 512MiB to fix the boot problem. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | | | ARM: SAMSUNG: Add naming of s3c64xx-spi devicesHeiko Stuebner2012-10-177-0/+50
| | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a5238e360b71 (spi: s3c64xx: move controller information into driver data) introduced separate device names for the different subtypes of the spi controller but forgot to set these in the relevant machines. To fix this introduce a s3c64xx_spi_setname function and populate all Samsung arches with the correct names. The function resides in a new header, as the s3c64xx-spi.h contains driver platform data and should therefore at some later point move out of the Samsung include dir. Tested on a s3c2416-based machine. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Stable <stable@vger.kernel.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> [s.nawrocki@samsung.com: tested on mach-exynos] Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | ARM: socfpga: Fix socfpga compilation with early_printk() enabledPavel Machek2012-10-253-17/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes early_printk() compilation for socfpga. (senduart/busyuart/waituart were missing). It does that by making Picochip code generic. Signed-off-by: Pavel Machek <pavel@denx.de> Acked-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 05:34:18 +0100