summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* mm, slub: remove redundant unfreeze_partials() from put_cpu_partial()Vlastimil Babka2021-09-031-7/+0
| | | | | | | | | | | | | | | | | Commit d6e0b7fa1186 ("slub: make dead caches discard free slabs immediately") introduced cpu partial flushing for kmemcg caches, based on setting the target cpu_partial to 0 and adding a flushing check in put_cpu_partial(). This code that sets cpu_partial to 0 was later moved by c9fc586403e7 ("slab: introduce __kmemcg_cache_deactivate()") and ultimately removed by 9855609bde03 ("mm: memcg/slab: use a single set of kmem_caches for all accounted allocations"). However the check and flush in put_cpu_partial() was never removed, although it's effectively a dead code. So this patch removes it. Note that d6e0b7fa1186 also added preempt_disable()/enable() to unfreeze_partials() which could be thus also considered unnecessary. But further patches will rely on it, so keep it. Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
* mm, slub: don't disable irq for debug_check_no_locks_freed()Vlastimil Babka2021-09-031-13/+1
| | | | | | | | | | | | | In slab_free_hook() we disable irqs around the debug_check_no_locks_freed() call, which is unnecessary, as irqs are already being disabled inside the call. This seems to be leftover from the past where there were more calls inside the irq disabled sections. Remove the irq disable/enable operations. Mel noted: > Looks like it was needed for kmemcheck which went away back in 4.15 Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@techsingularity.net>
* mm, slub: allocate private object map for validate_slab_cache()Vlastimil Babka2021-09-031-9/+15
| | | | | | | | | | | validate_slab_cache() is called either to handle a sysfs write, or from a self-test context. In both situations it's straightforward to preallocate a private object bitmap instead of grabbing the shared static one meant for critical sections, so let's do that. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Mel Gorman <mgorman@techsingularity.net>
* mm, slub: allocate private object map for debugfs listingsVlastimil Babka2021-09-031-15/+29
| | | | | | | | | | | | | | | | Slub has a static spinlock protected bitmap for marking which objects are on freelist when it wants to list them, for situations where dynamically allocating such map can lead to recursion or locking issues, and on-stack bitmap would be too large. The handlers of debugfs files alloc_traces and free_traces also currently use this shared bitmap, but their syscall context makes it straightforward to allocate a private map before entering locked sections, so switch these processing paths to use a private bitmap. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Mel Gorman <mgorman@techsingularity.net>
* mm, slub: don't call flush_all() from slab_debug_trace_open()Vlastimil Babka2021-09-031-3/+0
| | | | | | | | | slab_debug_trace_open() can only be called on caches with SLAB_STORE_USER flag and as with all slub debugging flags, such caches avoid cpu or percpu partial slabs altogether, so there's nothing to flush. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Christoph Lameter <cl@linux.com>
* Linux 5.14v5.14Linus Torvalds2021-08-301-1/+1
|
* Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2021-08-291-1/+1
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One hotfix for a NULL pointer deref in the Renesas usb clk driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereference
| * clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereferenceAdam Ford2021-08-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | The probe was manually passing NULL instead of dev to devm_clk_hw_register. This caused a Unable to handle kernel NULL pointer dereference error. Fix this by passing 'dev'. Signed-off-by: Adam Ford <aford173@gmail.com> Fixes: a20a40a8bbc2 ("clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | Merge tag 'sched_urgent_for_v5.14' of ↵Linus Torvalds2021-08-292-27/+121
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Have get_push_task() check whether current has migration disabled and thus avoid useless invocations of the migration thread - Rework initialization flow so that all rq->core's are initialized, even of CPUs which have not been onlined yet, so that iterating over them all works as expected * tag 'sched_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix get_push_task() vs migrate_disable() sched: Fix Core-wide rq->lock for uninitialized CPUs
| * | sched: Fix get_push_task() vs migrate_disable()Sebastian Andrzej Siewior2021-08-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | push_rt_task() attempts to move the currently running task away if the next runnable task has migration disabled and therefore is pinned on the current CPU. The current task is retrieved via get_push_task() which only checks for nr_cpus_allowed == 1, but does not check whether the task has migration disabled and therefore cannot be moved either. The consequence is a pointless invocation of the migration thread which correctly observes that the task cannot be moved. Return NULL if the task has migration disabled and cannot be moved to another CPU. Fixes: a7c81556ec4d3 ("sched: Fix migrate_disable() vs rt/dl balancing") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210826133738.yiotqbtdaxzjsnfj@linutronix.de
| * | sched: Fix Core-wide rq->lock for uninitialized CPUsPeter Zijlstra2021-08-202-27/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eugene tripped over the case where rq_lock(), as called in a for_each_possible_cpu() loop came apart because rq->core hadn't been setup yet. This is a somewhat unusual, but valid case. Rework things such that rq->core is initialized to point at itself. IOW initialize each CPU as a single threaded Core. CPU online will then join the new CPU (thread) to an existing Core where needed. For completeness sake, have CPU offline fully undo the state so as to not presume the topology will match the next time it comes online. Fixes: 9edeaea1bc45 ("sched: Core-wide rq->lock") Reported-by: Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Josh Don <joshdon@google.com> Tested-by: Eugene Syromiatnikov <esyr@redhat.com> Link: https://lkml.kernel.org/r/YR473ZGeKqMs6kw+@hirez.programming.kicks-ass.net
* | | Merge tag 'irq_urgent_for_v5.14' of ↵Linus Torvalds2021-08-291-0/+3
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Have msix_mask_all() check a global control which says whether MSI-X masking should be done and thus make it usable on Xen-PV too * tag 'irq_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Skip masking MSI-X on Xen PV
| * | | PCI/MSI: Skip masking MSI-X on Xen PVMarek Marczykowski-Górecki2021-08-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running as Xen PV guest, masking MSI-X is a responsibility of the hypervisor. The guest has no write access to the relevant BAR at all - when it tries to, it results in a crash like this: BUG: unable to handle page fault for address: ffffc9004069100c #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0 e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e] e1000_probe+0x41f/0xdb0 [e1000e] local_pci_probe+0x42/0x80 (...) The recently introduced function msix_mask_all() does not check the global variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking of MSI[-X] interrupts. Add the check to make this function XEN PV compatible. Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com
* | | | Merge tag 'perf_urgent_for_v5.14' of ↵Linus Torvalds2021-08-294-2/+12
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Prevent the amd/power module from being removed while in use - Mark AMD IBS as not supporting content exclusion - Add a workaround for AMD erratum #1197 where IBS registers might not be restored properly after exiting CC6 state - Fix a potential truncation of a 32-bit variable due to shifting - Read the correct bits describing the number of configurable address ranges on Intel PT * tag 'perf_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/power: Assign pmu.module perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op perf/x86/amd/ibs: Work around erratum #1197 perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32 perf/x86/intel/pt: Fix mask of num_address_ranges
| * | | | perf/x86/amd/power: Assign pmu.moduleKim Phillips2021-08-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assign pmu.module so the driver can't be unloaded whilst in use. Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20210817221048.88063-4-kim.phillips@amd.com
| * | | | perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS OpKim Phillips2021-08-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit: 2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs") neglected to do so. Fixes: 2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210817221048.88063-2-kim.phillips@amd.com
| * | | | perf/x86/amd/ibs: Work around erratum #1197Kim Phillips2021-08-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Erratum #1197 "IBS (Instruction Based Sampling) Register State May be Incorrect After Restore From CC6" is published in a document: "Revision Guide for AMD Family 19h Models 00h-0Fh Processors" 56683 Rev. 1.04 July 2021 https://bugzilla.kernel.org/show_bug.cgi?id=206537 Implement the erratum's suggested workaround and ignore IBS samples if MSRC001_1031 == 0. Signed-off-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20210817221048.88063-3-kim.phillips@amd.com
| * | | | perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32Colin Ian King2021-08-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The u32 variable pci_dword is being masked with 0x1fffffff and then left shifted 23 places. The shift is a u32 operation,so a value of 0x200 or more in pci_dword will overflow the u32 and only the bottow 32 bits are assigned to addr. I don't believe this was the original intent. Fix this by casting pci_dword to a resource_size_t to ensure no overflow occurs. Note that the mask and 12 bit left shift operation does not need this because the mask SNR_IMC_MMIO_MEM0_MASK and shift is always a 32 bit value. Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge") Addresses-Coverity: ("Unintentional integer overflow") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20210706114553.28249-1-colin.king@canonical.com
| * | | | perf/x86/intel/pt: Fix mask of num_address_rangesXiaoyao Li2021-08-251-1/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of configurable address ranges for filtering, not bit 1:0. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lkml.kernel.org/r/20210824040622.4081502-1-xiaoyao.li@intel.com
* | | | Merge tag 'x86_urgent_for_v5.14' of ↵Linus Torvalds2021-08-293-9/+30
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix build error on RHEL where -Werror=maybe-uninitialized is set. - Restore the firmware's IDT when calling EFI boot services and before ExitBootServices() has been called. This fixes a boot failure on what appears to be a tablet with 32-bit UEFI running a 64-bit kernel. * tag 'x86_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Fix a maybe-uninitialized build warning treated as error x86/efi: Restore Firmware IDT before calling ExitBootServices()
| * | | | x86/resctrl: Fix a maybe-uninitialized build warning treated as errorBabu Moger2021-08-221-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent commit 064855a69003 ("x86/resctrl: Fix default monitoring groups reporting") caused a RHEL build failure with an uninitialized variable warning treated as an error because it removed the default case snippet. The RHEL Makefile uses '-Werror=maybe-uninitialized' to force possibly uninitialized variable warnings to be treated as errors. This is also reported by smatch via the 0day robot. The error from the RHEL build is: arch/x86/kernel/cpu/resctrl/monitor.c: In function ‘__mon_event_count’: arch/x86/kernel/cpu/resctrl/monitor.c:261:12: error: ‘m’ may be used uninitialized in this function [-Werror=maybe-uninitialized] m->chunks += chunks; ^~ The upstream Makefile does not build using '-Werror=maybe-uninitialized'. So, the problem is not seen there. Fix the problem by putting back the default case snippet. [ bp: note that there's nothing wrong with the code and other compilers do not trigger this warning - this is being done just so the RHEL compiler is happy. ] Fixes: 064855a69003 ("x86/resctrl: Fix default monitoring groups reporting") Reported-by: Terry Bowman <Terry.Bowman@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Babu Moger <babu.moger@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/162949631908.23903.17090272726012848523.stgit@bmoger-ubuntu
| * | | | x86/efi: Restore Firmware IDT before calling ExitBootServices()Joerg Roedel2021-08-212-9/+24
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 79419e13e808 ("x86/boot/compressed/64: Setup IDT in startup_32 boot path") introduced an IDT into the 32-bit boot path of the decompressor stub. But the IDT is set up before ExitBootServices() is called, and some UEFI firmwares rely on their own IDT. Save the firmware IDT on boot and restore it before calling into EFI functions to fix boot failures introduced by above commit. Fixes: 79419e13e808 ("x86/boot/compressed/64: Setup IDT in startup_32 boot path") Reported-by: Fabio Aiuto <fabioaiuto83@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Cc: stable@vger.kernel.org # 5.13+ Link: https://lkml.kernel.org/r/20210820125703.32410-1-joro@8bytes.org
* | | | Revert "parisc: Add assembly implementations for memset, strlen, strcpy, ↵Helge Deller2021-08-295-157/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | strncpy and strcat" This reverts commit 83af58f8068ea3f7b3c537c37a30887bfa585069. It turns out that at least the assembly implementation for strncpy() was buggy. Revert the whole commit and return back to the default coding. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v5.4+ Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge tag 'scsi-fixes' of ↵Linus Torvalds2021-08-281-3/+6
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix for a race introduced by a fix that went into 5.14-rc5" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Fix hang of freezing queue between blocking and running device
| * | | | scsi: core: Fix hang of freezing queue between blocking and running deviceLi Jinlin2021-08-251-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We found a hang, the steps to reproduce are as follows: 1. blocking device via scsi_device_set_state() 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo none > /sys/block/sda/queue/scheduler 4. echo "running" >/sys/block/sda/device/state Step 3 and 4 should complete after step 4, but they hang. CPU#0 CPU#1 CPU#2 --------------- ---------------- ---------------- Step 1: blocking device Step 2: dd xxxx ^^^^^^ get request q_usage_counter++ Step 3: switching scheculer elv_iosched_store elevator_switch blk_mq_freeze_queue blk_freeze_queue > blk_freeze_queue_start ^^^^^^ mq_freeze_depth++ > blk_mq_run_hw_queues ^^^^^^ can't run queue when dev blocked > blk_mq_freeze_queue_wait ^^^^^^ Hang here!!! wait q_usage_counter==0 Step 4: running device store_state_field scsi_rescan_device scsi_attach_vpd scsi_vpd_inquiry __scsi_execute blk_get_request blk_mq_alloc_request blk_queue_enter ^^^^^^ Hang here!!! wait mq_freeze_depth==0 blk_mq_run_hw_queues ^^^^^^ dispatch IO, q_usage_counter will reduce to zero blk_mq_unfreeze_queue ^^^^^ mq_freeze_depth-- To fix this, we need to run queue before rescanning device when the device state changes to SDEV_RUNNING. Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Signed-off-by: Qiu Laibin <qiulaibin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | | | | Merge tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds2021-08-286-76/+89
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull USB fixes from Greg KH: "Here are a few tiny USB fixes for reported issues with some USB drivers. These fixes include: - gadget driver fixes for regressions - tcpm driver fix - dwc3 driver fixes - xhci renesas firmware loading fix, again. - usb serial option driver device id addition - usb serial ch341 revert for regression All all of these have been in linux-next with no reported problems" * tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: u_audio: fix race condition on endpoint stop usb: gadget: f_uac2: fixup feedback endpoint stop usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running usb: renesas-xhci: Prefer firmware loading on unknown ROM state usb: dwc3: gadget: Stop EP0 transfers during pullup disable usb: dwc3: gadget: Fix dwc3_calc_trbs_left() Revert "USB: serial: ch341: fix character loss at high transfer rates" USB: serial: option: add new VID/PID to support Fibocom FG150
| * | | | | usb: gadget: u_audio: fix race condition on endpoint stopJerome Brunet2021-08-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the endpoint completion callback is call right after the ep_enabled flag is cleared and before usb_ep_dequeue() is call, we could do a double free on the request and the associated buffer. Fix this by clearing ep_enabled after all the endpoint requests have been dequeued. Fixes: 7de8681be2cd ("usb: gadget: u_audio: Free requests only after callback") Cc: stable <stable@vger.kernel.org> Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | usb: gadget: f_uac2: fixup feedback endpoint stopJerome Brunet2021-08-271-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the uac2 function is stopped, there seems to be an issue reported on some platforms (Intel Merrifield at least) BUG: kernel NULL pointer dereference, address: 0000000000000008 ... RIP: 0010:dwc3_gadget_del_and_unmap_request+0x19/0xe0 ... Call Trace: dwc3_remove_requests.constprop.0+0x12f/0x170 __dwc3_gadget_ep_disable+0x7a/0x160 dwc3_gadget_ep_disable+0x3d/0xd0 usb_ep_disable+0x1c/0x70 u_audio_stop_capture+0x79/0x120 [u_audio] afunc_set_alt+0x73/0x80 [usb_f_uac2] composite_setup+0x224/0x1b90 [libcomposite] The issue happens only when the gadget is using the sync type "async", not "adaptive". This indicates that problem is coming from the feedback endpoint, which is only used with async synchronization mode. The problem is that request is freed regardless of usb_ep_dequeue(), which ends up badly if the request is not actually dequeued yet. Update the feedback endpoint free function to release the endpoint the same way it is done for the data endpoint, which takes care of the problem. Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support") Reported-by: Ferry Toth <ftoth@exalondelft.nl> Tested-by: Ferry Toth <ftoth@exalondelft.nl> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210827075853.266912-1-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is runningKyle Tso2021-08-261-43/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the port is going to send Discover_Identity Message, vdm_sm_running flag was intentionally set before entering Ready States in order to avoid the conflict because the port and the port partner might start AMS at almost the same time after entering Ready States. However, the original design has a problem. When the port is doing DR_SWAP from Device to Host, it raises the flag. Later in the tcpm_send_discover_work, the flag blocks the procedure of sending the Discover_Identity and it might never be cleared until disconnection. Since there exists another flag send_discover representing that the port is going to send Discover_Identity or not, it is enough to use that flag to prevent the conflict. Also change the timing of the set/clear of vdm_sm_running to indicate whether the VDM SM is actually running or not. Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Cc: stable <stable@vger.kernel.org> Cc: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210826124201.1562502-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | usb: renesas-xhci: Prefer firmware loading on unknown ROM stateTakashi Iwai2021-08-261-12/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent attempt to handle an unknown ROM state in the commit d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state") resulted in a regression and reverted later by the commit 44cf53602f5a ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state""). The problem of the former fix was that it treated the failure of firmware loading as a fatal error. Since the firmware files aren't included in the standard linux-firmware tree, most users don't have them, hence they got the non-working system after that. The revert fixed the regression, but also it didn't make the firmware loading triggered even on the devices that do need it. So we need still a fix for them. This is another attempt to handle the unknown ROM state. Like the previous fix, this also tries to load the firmware when ROM shows unknown state. In this patch, however, the failure of a firmware loading (such as a missing firmware file) isn't handled as a fatal error any longer when ROM has been already detected, but it falls back to the ROM mode like before. The error is returned only when no ROM is detected and the firmware loading failed. Along with it, for simplifying the code flow, the detection and the check of ROM is factored out from renesas_fw_check_running() and done in the caller side, renesas_xhci_check_request_fw(). It avoids the redundant ROM checks. The patch was tested on Lenovo Thinkpad T14 gen (BIOS 1.34). Also it was confirmed that no regression is seen on another Thinkpad T14 machine that has worked without the patch, too. Fixes: 44cf53602f5a ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"") Cc: stable <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1189207 Link: https://lore.kernel.org/r/20210826124127.14789-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | usb: dwc3: gadget: Stop EP0 transfers during pullup disableWesley Cheng2021-08-261-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During a USB cable disconnect, or soft disconnect scenario, a pending SETUP transaction may not be completed, leading to the following error: dwc3 a600000.dwc3: timed out waiting for SETUP phase If this occurs, then the entire pullup disable routine is skipped and proper cleanup and halting of the controller does not complete. Instead of returning an error (which is ignored from the UDC perspective), allow the pullup disable routine to continue, which will also handle disabling of EP0/1. This will end any active transfers as well. Ensure to clear any delayed_status also, as the timeout could happen within the STATUS stage. Fixes: bb0147364850 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so") Cc: <stable@vger.kernel.org> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/20210825042855.7977-1-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | usb: dwc3: gadget: Fix dwc3_calc_trbs_left()Thinh Nguyen2021-08-261-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can't depend on the TRB's HWO bit to determine if the TRB ring is "full". A TRB is only available when the driver had processed it, not when the controller consumed and relinquished the TRB's ownership to the driver. Otherwise, the driver may overwrite unprocessed TRBs. This can happen when many transfer events accumulate and the system is slow to process them and/or when there are too many small requests. If a request is in the started_list, that means there is one or more unprocessed TRBs remained. Check this instead of the TRB's HWO bit whether the TRB ring is full. Fixes: c4233573f6ee ("usb: dwc3: gadget: prepare TRBs on update transfers too") Cc: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/e91e975affb0d0d02770686afc3a5b9eb84409f6.1629335416.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | | Merge tag 'usb-serial-5.14-rc8' of ↵Greg Kroah-Hartman2021-08-262-1/+2
| |\ \ \ \ \ | | |_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.14-rc8 Here's a fix for a regression in 5.14 (also backported to stable) which caused reads to stall for ch341 devices. Included is also a new modem device id. All but the revert have been in linux-next, and with no reported issues. * tag 'usb-serial-5.14-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: Revert "USB: serial: ch341: fix character loss at high transfer rates" USB: serial: option: add new VID/PID to support Fibocom FG150
| | * | | | Revert "USB: serial: ch341: fix character loss at high transfer rates"Johan Hovold2021-08-251-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 3c18e9baee0ef97510dcda78c82285f52626764b. These devices do not appear to send a zero-length packet when the transfer size is a multiple of the bulk-endpoint max-packet size. This means that incoming data may not be processed by the driver until a short packet is received or the receive buffer is full. Revert back to using endpoint-sized receive buffers to avoid stalled reads. Reported-by: Paul Größel <pb.g@gmx.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131 Fixes: 3c18e9baee0e ("USB: serial: ch341: fix character loss at high transfer rates") Cc: stable@vger.kernel.org Cc: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
| | * | | | USB: serial: option: add new VID/PID to support Fibocom FG150Zhengjun Zhang2021-08-241-0/+2
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform, support Sub-6G band. Here are the outputs of lsusb -v and usb-devices: > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 > D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=2cb7 ProdID=010b Rev=04.14 > S: Manufacturer=Fibocom > S: Product=Fibocom Modem_SN:XXXXXXXX > S: SerialNumber=XXXXXXXX > C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA > I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host > I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) > I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 3.20 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 9 > idVendor 0x2cb7 Fibocom > idProduct 0x010b > bcdDevice 4.14 > iManufacturer 1 Fibocom > iProduct 2 Fibocom Modem_SN:XXXXXXXX > iSerial 3 XXXXXXXX > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 0x00e6 > bNumInterfaces 5 > bConfigurationValue 1 > iConfiguration 4 RNDIS_DUN_DIAG_ADB > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 896mA > Interface Association: > bLength 8 > bDescriptorType 11 > bFirstInterface 0 > bInterfaceCount 2 > bFunctionClass 239 Miscellaneous Device > bFunctionSubClass 4 > bFunctionProtocol 1 > iFunction 7 RNDIS > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 239 Miscellaneous Device > bInterfaceSubClass 4 > bInterfaceProtocol 1 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 01 > ** UNRECOGNIZED: 04 24 02 00 > ** UNRECOGNIZED: 05 24 06 00 01 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 9 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 CDC Data > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x8e EP 14 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x0f EP 15 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 00 > ** UNRECOGNIZED: 04 24 02 02 > ** UNRECOGNIZED: 05 24 06 00 00 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x000a 1x 10 bytes > bInterval 9 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 48 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x84 EP 4 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 4 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 66 > bInterfaceProtocol 1 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Binary Object Store Descriptor: > bLength 5 > bDescriptorType 15 > wTotalLength 0x0016 > bNumDeviceCaps 2 > USB 2.0 Extension Device Capability: > bLength 7 > bDescriptorType 16 > bDevCapabilityType 2 > bmAttributes 0x00000006 > BESL Link Power Management (LPM) Supported > SuperSpeed USB Device Capability: > bLength 10 > bDescriptorType 16 > bDevCapabilityType 3 > bmAttributes 0x00 > wSpeedsSupported 0x000f > Device can operate at Low Speed (1Mbps) > Device can operate at Full Speed (12Mbps) > Device can operate at High Speed (480Mbps) > Device can operate at SuperSpeed (5Gbps) > bFunctionalitySupport 1 > Lowest fully-functional device speed is Full Speed (12Mbps) > bU1DevExitLat 1 micro seconds > bU2DevExitLat 500 micro seconds > Device Status: 0x0000 > (Bus Powered) Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
* | | | | Merge tag 'powerpc-5.14-7' of ↵Linus Torvalds2021-08-282-4/+5
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix scv implicit soft-mask table for relocated (eg. kdump) kernels - Re-enable ARCH_ENABLE_SPLIT_PMD_PTLOCK, which was disabled due to a typo Thanks to Lukas Bulwahn, Nicholas Piggin, and Daniel Axtens. * tag 'powerpc-5.14-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Fix scv implicit soft-mask table for relocated kernels powerpc: Re-enable ARCH_ENABLE_SPLIT_PMD_PTLOCK
| * | | | | powerpc/64s: Fix scv implicit soft-mask table for relocated kernelsNicholas Piggin2021-08-201-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The implict soft-mask table addresses get relocated if they use a relative symbol like a label. This is right for code that runs relocated but not for unrelocated. The scv interrupt vectors run unrelocated, so absolute addresses are required for their soft-mask table entry. This fixes crashing with relocated kernels, usually an asynchronous interrupt hitting in the scv handler, then hitting the trap that checks whether r1 is in userspace. Fixes: 325678fd0522 ("powerpc/64s: add a table of implicit soft-masked addresses") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210820103431.1701240-1-npiggin@gmail.com
| * | | | | powerpc: Re-enable ARCH_ENABLE_SPLIT_PMD_PTLOCKLukas Bulwahn2021-08-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 66f24fa766e3 ("mm: drop redundant ARCH_ENABLE_SPLIT_PMD_PTLOCK") broke PMD split page table lock for powerpc. It selects the non-existent config ARCH_ENABLE_PMD_SPLIT_PTLOCK in arch/powerpc/platforms/Kconfig.cputype, but clearly intended to select ARCH_ENABLE_SPLIT_PMD_PTLOCK (notice the word swapping!), as that commit did for all other architectures. Fix it by selecting the correct symbol ARCH_ENABLE_SPLIT_PMD_PTLOCK. Fixes: 66f24fa766e3 ("mm: drop redundant ARCH_ENABLE_SPLIT_PMD_PTLOCK") Cc: stable@vger.kernel.org # v5.13+ Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Daniel Axtens <dja@axtens.net> [mpe: Reword change log to make it clear this is a bug fix] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210819113954.17515-3-lukas.bulwahn@gmail.com
* | | | | | Merge tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-blockLinus Torvalds2021-08-284-45/+21
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block fixes from Jens Axboe: - Revert the mq-deadline priority handling, it's causing serious performance regressions. While experimental patches exists to fix this up, it's too late to do so now. Revert it and re-do it properly for 5.15 instead. - Fix a NULL vs IS_ERR() regression in this release (Dan) - Fix a mq-deadline accounting regression in this release (Bart) - Mark cryptoloop as deprecated. It's broken and dm-crypt fully supports it, and it's actively intefering with loop. Plan on removal for 5.16 (Christoph) * tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-block: cryptoloop: add a deprecation warning pd: fix a NULL vs IS_ERR() check Revert "block/mq-deadline: Prioritize high-priority requests" mq-deadline: Fix request accounting
| * | | | | | cryptoloop: add a deprecation warningChristoph Hellwig2021-08-272-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for cryptoloop has been officially marked broken and deprecated in favor of dm-crypt (which supports the same broken algorithms if needed) in Linux 2.6.4 (released in March 2004), and support for it has been entirely removed from losetup in util-linux 2.23 (released in April 2013). Add a warning and a deprecation schedule. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210827163250.255325-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * | | | | | pd: fix a NULL vs IS_ERR() checkDan Carpenter2021-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | blk_mq_alloc_disk() returns error pointers, it doesn't return NULL so correct the check. Fixes: 262d431f9000 ("pd: use blk_mq_alloc_disk and blk_cleanup_disk") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210827100023.GB9449@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * | | | | | Revert "block/mq-deadline: Prioritize high-priority requests"Jens Axboe2021-08-261-37/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit fb926032b3209300f9dc454a36b8299582ae545c. Zhen reports that this commit slows down mq-deadline on a 128 thread box, going from 258K IOPS to 170-180K. My testing shows that Optane gen2 IOPS goes from 2.3M IOPS to 1.2M IOPS on a 64 thread box. Looking in detail at the code, the main culprit here is needing to sum percpu counters in the dispatch hot path, leading to very high CPU utilization there. To make matters worse, the code currently needs to sum 2 percpu counters, and it does so in the most naive way of iterating possible CPUs _twice_. Since we're close to release, revert this commit and we can re-do it with regular per-priority counters instead for the 5.15 kernel. Link: https://lore.kernel.org/linux-block/20210826144039.2143-1-thunder.leizhen@huawei.com/ Reported-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * | | | | | mq-deadline: Fix request accountingBart Van Assche2021-08-251-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The block layer may call the I/O scheduler .finish_request() callback without having called the .insert_requests() callback. Make sure that the mq-deadline I/O statistics are correct if the block layer inserts an I/O request that bypasses the I/O scheduler. This patch prevents that lower priority I/O is delayed longer than necessary for mixed I/O priority workloads. Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: 08a9ad8bf607 ("block/mq-deadline: Add cgroup support") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210824170520.1659173-1-bvanassche@acm.org Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | | | | | | Merge tag 'soc-fixes-5.14-4' of ↵Linus Torvalds2021-08-282-2/+3
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Just two trivial fixes from the reset driver tree, nothing else came up since the last soc fixes" * tag 'soc-fixes-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: reset: reset-zynqmp: Fixed the argument data type reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5
| * \ \ \ \ \ \ Merge tag 'reset-fixes-for-v5.14' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann2021-08-262-2/+3
| |\ \ \ \ \ \ \ | | |_|_|/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm/fixes Reset controller fixes for v5.14 Hide the Sparx5 reset driver unless the ARCH_SPARX5 or COMPILE_TEST options are enabled, to avoid unnecessarily asking users about this driver. Fix a return value argument type in the ZynqMP reset driver. * tag 'reset-fixes-for-v5.14' of git://git.pengutronix.de/pza/linux: reset: reset-zynqmp: Fixed the argument data type reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5 Link: https://lore.kernel.org/r/e543959c5b5ee7b25686f81049bf187d602daeda.camel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | | | reset: reset-zynqmp: Fixed the argument data typeSai Krishna Potthuri2021-08-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the data type of the variable 'val' from int to u32. Addresses-Coverity: argument of type "int *" is incompatible with parameter of type "u32 *" Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/925cebbe4eb73c7d0a536da204748d33c7100d8c.1624448778.git.michal.simek@xilinx.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
| | * | | | | | reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5Geert Uytterhoeven2021-07-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Microchip Sparx5 switch reset block is only present on Microchip Sparx5 SoCs. Hence add a dependency on ARCH_SPARX5, to prevent asking the user about this driver when configuring a kernel without Sparx5 support. Fixes: 453ed4283bebd077 ("reset: mchp: sparx5: add switch reset driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/6e08f6f46123d0712397e901716b48f13fa5dc48.1624627657.git.geert@linux-m68k.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
* | | | | | | | Merge tag 'acpi-5.14-rc8' of ↵Linus Torvalds2021-08-271-1/+1
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a regression introduced during this cycle that has been partially addressed by an earlier commit (Andy Shevchenko)" * tag 'acpi-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()
| * | | | | | | | media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()Andy Shevchenko2021-08-261-1/+1
| |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") moved adev assignment outside of error path and hence made acpi_dev_put(sensor->adev) a no-op. We still need to drop reference count on error path, and to achieve that, replace sensor->adev by locally assigned adev. Fixes: 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") Depends-on: fc68f42aa737 ("ACPI: fix NULL pointer dereference") Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | | | | | | Merge tag 'pm-5.14-rc8' of ↵Linus Torvalds2021-08-272-6/+12
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two issues introduced during this cycle, one of which is a regression and the other one affects new code. Specifics: - Prevent the operating performance points (OPP) code from crashing when some entries in the table of required OPPs are set to error pointer values (Marijn Suijten) - Prevent the generic power domains (genpd) framework from incorrectly overriding the performance state of a device set by its driver while it is runtime-suspended or when runtime PM of it is disabled (Dmitry Osipenko)" * tag 'pm-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: domains: Improve runtime PM performance state handling opp: core: Check for pending links before reading required_opp pointers
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-05 00:36:09 +0100