summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* net: dsa: sja1105: fix sja1105_parse_rgmii_delays()Oleksij Rempel2019-11-251-5/+5
| | | | | | | | | | | This function was using configuration of port 0 in devicetree for all ports. In case CPU port was not 0, the delay settings was ignored. This resulted not working communication between CPU and the switch. Fixes: f5b8631c293b ("net: dsa: sja1105: Error out if RGMII delays are requested in DT") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* macvlan: schedule bc_work even if errorMenglong Dong2019-11-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | While enqueueing a broadcast skb to port->bc_queue, schedule_work() is called to add port->bc_work, which processes the skbs in bc_queue, to "events" work queue. If port->bc_queue is full, the skb will be discarded and schedule_work(&port->bc_work) won't be called. However, if port->bc_queue is full and port->bc_work is not running or pending, port->bc_queue will keep full and schedule_work() won't be called any more, and all broadcast skbs to macvlan will be discarded. This case can happen: macvlan_process_broadcast() is the pending function of port->bc_work, it moves all the skbs in port->bc_queue to the queue "list", and processes the skbs in "list". During this, new skbs will keep being added to port->bc_queue in macvlan_broadcast_enqueue(), and port->bc_queue may already full when macvlan_process_broadcast() return. This may happen, especially when there are a lot of real-time threads and the process is preempted. Fix this by calling schedule_work(&port->bc_work) even if port->bc_work is full in macvlan_broadcast_enqueue(). Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
* mdio_bus: don't use managed reset-controllerDavid Bauer2019-11-251-2/+4
| | | | | | | | | | | | | | | | Geert Uytterhoeven reported that using devm_reset_controller_get leads to a WARNING when probing a reset-controlled PHY. This is because the device devm_reset_controller_get gets supplied is not actually the one being probed. Acquire an unmanaged reset-control as well as free the reset_control on unregister to fix this. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> CC: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David Bauer <mail@david-bauer.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* sctp: cache netns in sctp_ep_commonXin Long2019-11-244-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is to fix a data-race reported by syzbot: BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1: sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091 sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465 sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916 inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734 __sys_accept4+0x224/0x430 net/socket.c:1754 __do_sys_accept net/socket.c:1795 [inline] __se_sys_accept net/socket.c:1792 [inline] __x64_sys_accept+0x4e/0x60 net/socket.c:1792 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0: sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894 rht_key_get_hash include/linux/rhashtable.h:133 [inline] rht_key_hashfn include/linux/rhashtable.h:159 [inline] rht_head_hashfn include/linux/rhashtable.h:174 [inline] head_hashfn lib/rhashtable.c:41 [inline] rhashtable_rehash_one lib/rhashtable.c:245 [inline] rhashtable_rehash_chain lib/rhashtable.c:276 [inline] rhashtable_rehash_table lib/rhashtable.c:316 [inline] rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate is changing its value. However, what rhashtable wants is netns from asoc base.sk, and for an asoc, its netns won't change once set. So we can simply fix it by caching netns since created. Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable") Reported-by: syzbot+e3b35fe7918ff0ee474e@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* sctp: Fix memory leak in sctp_sf_do_5_2_4_dupcookNavid Emamdoost2019-11-241-1/+3
| | | | | | | | | | | In the implementation of sctp_sf_do_5_2_4_dupcook() the allocated new_asoc is leaked if security_sctp_assoc_request() fails. Release it via sctp_association_free(). Fixes: 2277c7cd75e3 ("sctp: Add LSM hooks") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2019-11-2250-178/+356
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Validate tunnel options length in act_tunnel_key, from Xin Long. 2) Fix DMA sync bug in gve driver, from Adi Suresh. 3) TSO kills performance on some r8169 chips due to HW issues, disable by default in that case, from Corinna Vinschen. 4) Fix clock disable mismatch in fec driver, from Chubong Yuan. 5) Fix interrupt status bits define in hns3 driver, from Huazhong Tan. 6) Fix workqueue deadlocks in qeth driver, from Julian Wiedmann. 7) Don't napi_disable() twice in r8152 driver, from Hayes Wang. 8) Fix SKB extension memory leak, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) r8152: avoid to call napi_disable twice MAINTAINERS: Add myself as maintainer of virtio-vsock udp: drop skb extensions before marking skb stateless net: rtnetlink: prevent underflows in do_setvfinfo() can: m_can_platform: remove unnecessary m_can_class_resume() call can: m_can_platform: set net_device structure as driver data hv_netvsc: Fix send_table offset in case of a host bug hv_netvsc: Fix offset usage in netvsc_send_table() net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMIN sfc: Only cancel the PPS workqueue if it exists nfc: port100: handle command failure cleanly net-sysfs: fix netdev_queue_add_kobject() breakage r8152: Re-order napi_disable in rtl8152_close net: qca_spi: Move reset_count to struct qcaspi net: qca_spi: fix receive buffer size check net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode Revert "net/ibmvnic: Fix EOI when running in XIVE mode" net/mlxfw: Verify FSM error code translation doesn't exceed array size net/mlx5: Update the list of the PCI supported devices net/mlx5: Fix auto group size calculation ...
| * r8152: avoid to call napi_disable twiceHayes Wang2019-11-221-8/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Call napi_disable() twice would cause dead lock. There are three situations may result in the issue. 1. rtl8152_pre_reset() and set_carrier() are run at the same time. 2. Call rtl8152_set_tunable() after rtl8152_close(). 3. Call rtl8152_set_ringparam() after rtl8152_close(). For #1, use the same solution as commit 84811412464d ("r8152: Re-order napi_disable in rtl8152_close"). For #2 and #3, add checking the flag of IFF_UP and using napi_disable/napi_enable during mutex. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge tag 'linux-can-fixes-for-5.4-20191122' of ↵David S. Miller2019-11-221-3/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-11-22 this is a pull request of 2 patches for net/master, if possible for the current release cycle. Otherwise these patches should hit v5.4 via the stable tree. Both patches of this pull request target the m_can driver. Pankaj Sharma fixes the fallout in the m_can_platform part, which appeared with the introduction of the m_can platform framework. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * can: m_can_platform: remove unnecessary m_can_class_resume() callPankaj Sharma2019-11-221-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function m_can_runtime_resume() is getting recursively called from m_can_class_resume(). This results in a lock up. We need not call m_can_class_resume() during m_can_runtime_resume(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| | * can: m_can_platform: set net_device structure as driver dataPankaj Sharma2019-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code is failing during clock prepare enable because of not getting proper clock from platform device. [ 0.852089] Call trace: [ 0.854516] 0xffff0000fa22a668 [ 0.857638] clk_prepare+0x20/0x34 [ 0.861019] m_can_runtime_resume+0x2c/0xe4 [ 0.865180] pm_generic_runtime_resume+0x28/0x38 [ 0.869770] __rpm_callback+0x16c/0x1bc [ 0.873583] rpm_callback+0x24/0x78 [ 0.877050] rpm_resume+0x428/0x560 [ 0.880517] __pm_runtime_resume+0x7c/0xa8 [ 0.884593] m_can_clk_start.isra.9.part.10+0x1c/0xa8 [ 0.889618] m_can_class_register+0x138/0x370 [ 0.893950] m_can_plat_probe+0x120/0x170 [ 0.897939] platform_drv_probe+0x4c/0xa0 [ 0.901924] really_probe+0xd8/0x31c [ 0.905477] driver_probe_device+0x58/0xe8 [ 0.909551] device_driver_attach+0x68/0x70 [ 0.913711] __driver_attach+0x9c/0xf8 [ 0.917437] bus_for_each_dev+0x50/0xa0 [ 0.921251] driver_attach+0x20/0x28 [ 0.924804] bus_add_driver+0x148/0x1fc [ 0.928617] driver_register+0x6c/0x124 [ 0.932431] __platform_driver_register+0x48/0x50 [ 0.937113] m_can_plat_driver_init+0x18/0x20 [ 0.941446] do_one_initcall+0x4c/0x19c [ 0.945259] kernel_init_freeable+0x1d0/0x280 [ 0.949591] kernel_init+0x10/0x100 [ 0.953057] ret_from_fork+0x10/0x18 [ 0.956614] Code: 00000000 00000000 00000000 00000000 (fa22a668) [ 0.962681] ---[ end trace 881f71bd609de763 ]--- [ 0.967301] Kernel panic - not syncing: Attempted to kill init! A device driver for CAN controller hardware registers itself with the Linux network layer as a network device. So, the driver data for m_can should ideally be of type net_device. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * | MAINTAINERS: Add myself as maintainer of virtio-vsockStefano Garzarella2019-11-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Since I'm actively working on vsock and virtio/vhost transports, Stefan suggested to help him to maintain it. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | udp: drop skb extensions before marking skb statelessFlorian Westphal2019-11-222-5/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once udp stack has set the UDP_SKB_IS_STATELESS flag, later skb free assumes all skb head state has been dropped already. This will leak the extension memory in case the skb has extensions other than the ipsec secpath, e.g. bridge nf data. To fix this, set the UDP_SKB_IS_STATELESS flag only if we don't have extensions or if the extension space can be free'd. Fixes: 895b5c9f206eb7d25dc1360a ("netfilter: drop bridge nf reset from nf_reset") Cc: Paolo Abeni <pabeni@redhat.com> Reported-by: Byron Stanoszek <gandalf@winds.org> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: rtnetlink: prevent underflows in do_setvfinfo()Dan Carpenter2019-11-221-1/+22
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'hv_netvsc-Fix-send-indirection-table-offset'David S. Miller2019-11-222-9/+32
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Haiyang Zhang says: ==================== hv_netvsc: Fix send indirection table offset Fix send indirection table offset issues related to guest and host bugs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * hv_netvsc: Fix send_table offset in case of a host bugHaiyang Zhang2019-11-221-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If negotiated NVSP version <= NVSP_PROTOCOL_VERSION_6, the offset may be wrong (too small) due to a host bug. This can cause missing the end of the send indirection table, and add multiple zero entries from leading zeros before the data region. This bug adds extra burden on channel 0. So fix the offset by computing it from the data structure sizes. This will ensure netvsc driver runs normally on unfixed hosts, and future fixed hosts. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * hv_netvsc: Fix offset usage in netvsc_send_table()Haiyang Zhang2019-11-222-9/+20
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To reach the data region, the existing code adds offset in struct nvsp_5_send_indirect_table on the beginning of this struct. But the offset should be based on the beginning of its container, struct nvsp_message. This bug causes the first table entry missing, and adds an extra zero from the zero pad after the data region. This can put extra burden on the channel 0. So, correct the offset usage. Also add a boundary check to ensure not reading beyond data region. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMINMaciej Żenczykowski2019-11-221-2/+2
| | | | | | | | | | | | | | | | | | | | NET_RAW is less dangerous, so more likely to be available to a process, so check it first to prevent some spurious logging. This matches IP_TRANSPARENT which checks NET_RAW first. Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sfc: Only cancel the PPS workqueue if it existsMartin Habets2019-11-211-1/+2
| | | | | | | | | | | | | | | | | | The workqueue only exists for the primary PF. For other functions we hit a WARN_ON in kernel/workqueue.c. Fixes: 7c236c43b838 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * nfc: port100: handle command failure cleanlyOliver Neukum2019-11-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | If starting the transfer of a command suceeds but the transfer for the reply fails, it is not enough to initiate killing the transfer for the command may still be running. You need to wait for the killing to finish before you can reuse URB and buffer. Reported-and-tested-by: syzbot+711468aa5c3a1eabf863@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net-sysfs: fix netdev_queue_add_kobject() breakageEric Dumazet2019-11-211-0/+1
| | | | | | | | | | | | | | | | | | kobject_put() should only be called in error path. Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge tag 'mlx5-fixes-2019-11-20' of ↵David S. Miller2019-11-2012-56/+67
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-11-20 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.9: ('net/mlx5e: Fix set vf link state error flow') For -stable v4.14 ('net/mlxfw: Verify FSM error code translation doesn't exceed array size') For -stable v4.19 ('net/mlx5: Fix auto group size calculation') For -stable v5.3 ('net/mlx5e: Fix error flow cleanup in mlx5e_tc_tun_create_header_ipv4/6') ('net/mlx5e: Do not use non-EXT link modes in EXT mode') ('net/mlx5: Update the list of the PCI supported devices') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlxfw: Verify FSM error code translation doesn't exceed array sizeEran Ben Elisha2019-11-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Array mlxfw_fsm_state_err_str contains value to string translation, when values are provided by mlxfw_dev. If value is larger than MLXFW_FSM_STATE_ERR_MAX, return "unknown error" as expected instead of reading an address than exceed array size. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Update the list of the PCI supported devicesShani Shapp2019-11-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add the upcoming ConnectX-6 LX device ID. Fixes: 85327a9c4150 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Shani Shapp <shanish@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Fix auto group size calculationMaor Gottlieb2019-11-202-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once all the large flow groups (defined by the user when the flow table is created - max_num_groups) were created, then all the following new flow groups will have only one flow table entry, even though the flow table has place to larger groups. Fix the condition to prefer large flow group. Fixes: f0d22d187473 ("net/mlx5_core: Introduce flow steering autogrouped flow table") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Add missing capability bit check for IP-in-IPMarina Varshaver2019-11-201-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device that doesn't support IP-in-IP offloads has to filter csum and gso offload support, otherwise kernel will conclude that device is capable of offloading csum and gso for IP-in-IP tunnels and that might result in IP-in-IP tunnel not functioning. Fixes: 25948b87dda2 ("net/mlx5e: Support TSO and TX checksum offloads for IP-in-IP") Signed-off-by: Marina Varshaver <marinav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Do not use non-EXT link modes in EXT modeEran Ben Elisha2019-11-201-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some old Firmwares, connector type value was not supported, and value read from FW was 0. For those, driver used link mode in order to set connector type in link_ksetting. After FW exposed the connector type, driver translated the value to ethtool definitions. However, as 0 is a valid value, before returning PORT_OTHER, driver run the check of link mode in order to maintain backward compatibility. Cited patch added support to EXT mode. With both features (connector type and EXT link modes) ,if connector_type read from FW is 0 and EXT mode is set, driver mistakenly compare EXT link modes to non-EXT link mode. Fixed that by skipping this comparison if we are in EXT mode, as connector type value is valid in this scenario. Fixes: 6a897372417e ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Fix set vf link state error flowRoi Dayan2019-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit the ndo always returned success. Fix that. Fixes: 1ab2068a4c66 ("net/mlx5: Implement vports admin state backup/restore") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: DR, Limit STE hash table enlarge based on bytemaskAlex Vesker2019-11-202-20/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an ste hash table has too many collision we enlarge it to a bigger hash table (rehash). Rehashing collision improvement depends on the bytemask value. The more 1 bits we have in bytemask means better spreading in the table. Without this fix tables can grow in size without providing any improvement which can lead to memory depletion and failures. This patch will limit table rehash to reduce memory and improve the performance. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: DR, Skip rehash for tables with byte mask zeroAlex Vesker2019-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The byte mask fields affect on the hash index distribution, when the byte mask is zero, the hash calculation will always be equal to the same index. To avoid unneeded rehash of hash tables mark the table to skip rehash. This is needed by the next patch which will limit table rehash to reduce memory consumption. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: DR, Fix invalid EQ vector number on CQ creationAlex Vesker2019-11-201-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When creating a CQ, the CPU id is used for the vector value. This would fail in-case the CPU id was higher than the maximum vector value. Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Reorder mirrer action parsing to check for encap firstVlad Buslov2019-11-201-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mirred action parsing code in parse_tc_fdb_actions() first checks if out_dev has same parent id, and only verifies that there is a pending encap action that was parsed before. Recent change in vxlan module made function netdev_port_same_parent_id() to return true when called for mlx5 eswitch representor and vxlan device created explicitly on mlx5 representor device (vxlan devices created with "external" flag without explicitly specifying parent interface are not affected). With call to netdev_port_same_parent_id() returning true, incorrect code path is chosen and encap rules fail to offload because vxlan dev is not a valid eswitch forwarding dev. Dmesg log of error: [ 1784.389797] devices ens1f0_0 vxlan1 not on same switch HW, can't offload forwarding In order to fix the issue, rearrange conditional in parse_tc_fdb_actions() to check for pending encap action before checking if out_dev has the same parent id. Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Fix ingress rate configuration for representorsEli Cohen2019-11-201-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code uses the old method of prio encoding in flow_cls_common_offload. Fix to follow the changes introduced in commit ef01adae0e43 ("net: sched: use major priority number as hardware priority"). Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Fix error flow cleanup in mlx5e_tc_tun_create_header_ipv4/6Eli Cohen2019-11-201-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Be sure to release the neighbour in case of failures after successful route lookup. Fixes: 101f4de9dd52 ("net/mlx5e: Move TC tunnel offloading code to separate source file") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | r8152: Re-order napi_disable in rtl8152_closePrashant Malani2019-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both rtl_work_func_t() and rtl8152_close() call napi_disable(). Since the two calls aren't protected by a lock, if the close function starts executing before the work function, we can get into a situation where the napi_disable() function is called twice in succession (first by rtl8152_close(), then by set_carrier()). In such a situation, the second call would loop indefinitely, since rtl8152_close() doesn't call napi_enable() to clear the NAPI_STATE_SCHED bit. The rtl8152_close() function in turn issues a cancel_delayed_work_sync(), and so it would wait indefinitely for the rtl_work_func_t() to complete. Since rtl8152_close() is called by a process holding rtnl_lock() which is requested by other processes, this eventually leads to a system deadlock and crash. Re-order the napi_disable() call to occur after the work function disabling and urb cancellation calls are issued. Change-Id: I6ef0b703fc214998a037a68f722f784e1d07815e Reported-by: http://crbug.com/1017928 Signed-off-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'qca_spi-fixes'David S. Miller2019-11-202-6/+6
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stefan Wahren says: ==================== net: qca_spi: Fix receive and reset issues This small patch series fixes two major issues in the SPI driver for the QCA700x. It has been tested on a Charge Control C 300 (NXP i.MX6ULL + 2x QCA7000). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | net: qca_spi: Move reset_count to struct qcaspiStefan Wahren2019-11-202-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reset counter is specific for every QCA700x chip. So move this into the private driver struct. Otherwise we get unpredictable reset behavior in setups with multiple QCA700x chips. Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: Stefan Wahren <stefan.wahren@in-tech.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | net: qca_spi: fix receive buffer size checkMichael Heimpold2019-11-201-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When receiving many or larger packets, e.g. when doing a file download, it was observed that the read buffer size register reports up to 4 bytes more than the current define allows in the check. If this is the case, then no data transfer is initiated to receive the packets (and thus to empty the buffer) which results in a stall of the interface. These 4 bytes are a hardware generated frame length which is prepended to the actual frame, thus we have to respect it during our check. Fixes: 026b907d58c4 ("net: qca_spi: Add available buffer space verification") Signed-off-by: Michael Heimpold <michael.heimpold@in-tech.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'ibmvnic-regression'David S. Miller2019-11-201-3/+8
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Juliet Kim says: ==================== Support both XIVE and XICS modes in ibmvnic This series aims to support both XICS and XIVE with avoiding a regression in behavior when a system runs in XICS mode. Patch 1 reverts commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab (“net/ibmvnic: Fix EOI when running in XIVE mode.”) Patch 2 Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE modeJuliet Kim2019-11-201-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reversion of commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab (“net/ibmvnic: Fix EOI when running in XIVE mode.”) leaves us calling H_EOI even in XIVE mode. That will fail with H_FUNCTION because H_EOI is not supported in that mode. That failure is harmless. Ignore it so we can use common code for both XICS and XIVE. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | Revert "net/ibmvnic: Fix EOI when running in XIVE mode"Juliet Kim2019-11-201-3/+5
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab (“net/ibmvnic: Fix EOI when running in XIVE mode.”) since that has the unintended effect of changing the interrupt priority and emits warning when running in legacy XICS mode. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 's390-fixes'David S. Miller2019-11-204-13/+33
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Julian Wiedmann says: ==================== s390/qeth: fixes 2019-11-20 please apply two late qeth fixes to your net tree. The first fixes a deadlock that can occur if a qeth device is set offline while in the middle of processing deferred HW events. The second patch converts the return value of an error path to use -EIO, so that it can be passed back to userspace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | s390/qeth: return proper errno on IO errorJulian Wiedmann2019-11-201-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When propagating IO errors back to userspace, one error path in qeth_irq() currently returns '1' instead of a proper errno. Fixes: 54daaca7024d ("s390/qeth: cancel cmd on early error") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | s390/qeth: fix potential deadlock on workqueue flushJulian Wiedmann2019-11-203-8/+28
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The L2 bridgeport code uses the coarse 'conf_mutex' for guarding access to its configuration state. This can result in a deadlock when qeth_l2_stop_card() - called under the conf_mutex - blocks on flush_workqueue() to wait for the completion of pending bridgeport workers. Such workers would also need to aquire the conf_mutex, stalling indefinitely. Introduce a lock that specifically guards the bridgeport configuration, so that the workers no longer need the conf_mutex. Wrapping qeth_l2_promisc_to_bridge() in this fine-grained lock then also fixes a theoretical race against a concurrent qeth_bridge_port_role_store() operation. Fixes: c0a2e4d10d93 ("s390/qeth: conclude all event processing before offlining a card") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6/route: return if there is no fib_nh_gw_familyHangbin Liu2019-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we will return directly if (!rt || !rt->fib6_nh.fib_nh_gw_family) in function rt6_probe(), but after commit cc3a86c802f0 ("ipv6: Change rt6_probe to take a fib6_nh"), the logic changed to return if there is fib_nh_gw_family. Fixes: cc3a86c802f0 ("ipv6: Change rt6_probe to take a fib6_nh") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobjectJouni Hogander2019-11-201-11/+13
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kobject_init_and_add takes reference even when it fails. This has to be given up by the caller in error handling. Otherwise memory allocated by kobject_init_and_add is never freed. Originally found by Syzkaller: BUG: memory leak unreferenced object 0xffff8880679f8b08 (size 8): comm "netdev_register", pid 269, jiffies 4294693094 (age 12.132s) hex dump (first 8 bytes): 72 78 2d 30 00 36 20 d4 rx-0.6 . backtrace: [<000000008c93818e>] __kmalloc_track_caller+0x16e/0x290 [<000000001f2e4e49>] kvasprintf+0xb1/0x140 [<000000007f313394>] kvasprintf_const+0x56/0x160 [<00000000aeca11c8>] kobject_set_name_vargs+0x5b/0x140 [<0000000073a0367c>] kobject_init_and_add+0xd8/0x170 [<0000000088838e4b>] net_rx_queue_update_kobjects+0x152/0x560 [<000000006be5f104>] netdev_register_kobject+0x210/0x380 [<00000000e31dab9d>] register_netdevice+0xa1b/0xf00 [<00000000f68b2465>] __tun_chr_ioctl+0x20d5/0x3dd0 [<000000004c50599f>] tun_chr_ioctl+0x2f/0x40 [<00000000bbd4c317>] do_vfs_ioctl+0x1c7/0x1510 [<00000000d4c59e8f>] ksys_ioctl+0x99/0xb0 [<00000000946aea81>] __x64_sys_ioctl+0x78/0xb0 [<0000000038d946e5>] do_syscall_64+0x16f/0x580 [<00000000e0aa5d8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<00000000285b3d1a>] 0xffffffffffffffff Cc: David Miller <davem@davemloft.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * mdio_bus: Fix init if CONFIG_RESET_CONTROLLER=nGeert Uytterhoeven2019-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1d4639567d97 ("mdio_bus: Fix PTR_ERR applied after initialization to constant") accidentally changed a check from -ENOTSUPP to -ENOSYS, causing failures if reset controller support is not enabled. E.g. on r7s72100/rskrza1: sh-eth e8203000.ethernet: MDIO init failed: -524 sh-eth: probe of e8203000.ethernet failed with error -524 Seen on r8a7740/armadillo, r7s72100/rskrza1, and r7s9210/rza2mevb. Fixes: 1d4639567d97 ("mdio_bus: Fix PTR_ERR applied after initialization to constant") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: YueHaibing <yuehaibing@huawei.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Revert "mdio_bus: fix mdio_register_device when RESET_CONTROLLER is disabled"David S. Miller2019-11-201-2/+1
| | | | | | | | | | | | | | | | | | This reverts commit 075e238d12c21c8bde700d21fb48be7a3aa80194. Going to go with Geert's fix instead, which also has a correct Fixes tag. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: hns3: fix a wrong reset interrupt status maskHuazhong Tan2019-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | According to hardware user manual, bits5~7 in register HCLGE_MISC_VECTOR_INT_STS means reset interrupts status, but HCLGE_RESET_INT_M is defined as bits0~2 now. So it will make hclge_reset_err_handle() read the wrong reset interrupt status. This patch fixes this wrong bit mask. Fixes: 2336f19d7892 ("net: hns3: check reset interrupt status when reset fails") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fec: fix clock count mis-matchChuhong Yuan2019-11-201-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pm_runtime_put_autosuspend in probe will call runtime suspend to disable clks automatically if CONFIG_PM is defined. (If CONFIG_PM is not defined, its implementation will be empty, then runtime suspend will not be called.) Therefore, we can call pm_runtime_get_sync to runtime resume it first to enable clks, which matches the runtime suspend. (Only when CONFIG_PM is defined, otherwise pm_runtime_get_sync will also be empty, then runtime resume will not be called.) Then it is fine to disable clks without causing clock count mis-match. Fixes: c43eab3eddb4 ("net: fec: add missed clk_disable_unprepare in remove") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/sched: act_pedit: fix WARN() in the traffic pathDavide Caratti2019-11-201-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when configuring act_pedit rules, the number of keys is validated only on addition of a new entry. This is not sufficient to avoid hitting a WARN() in the traffic path: for example, it is possible to replace a valid entry with a new one having 0 extended keys, thus causing splats in dmesg like: pedit BUG: index 42 WARNING: CPU: 2 PID: 4054 at net/sched/act_pedit.c:410 tcf_pedit_act+0xc84/0x1200 [act_pedit] [...] RIP: 0010:tcf_pedit_act+0xc84/0x1200 [act_pedit] Code: 89 fa 48 c1 ea 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ac 00 00 00 48 8b 44 24 10 48 c7 c7 a0 c4 e4 c0 8b 70 18 e8 1c 30 95 ea <0f> 0b e9 a0 fa ff ff e8 00 03 f5 ea e9 14 f4 ff ff 48 89 58 40 e9 RSP: 0018:ffff888077c9f320 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffac2983a2 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888053927bec RBP: dffffc0000000000 R08: ffffed100a726209 R09: ffffed100a726209 R10: 0000000000000001 R11: ffffed100a726208 R12: ffff88804beea780 R13: ffff888079a77400 R14: ffff88804beea780 R15: ffff888027ab2000 FS: 00007fdeec9bd740(0000) GS:ffff888053900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdb3dfd000 CR3: 000000004adb4006 CR4: 00000000001606e0 Call Trace: tcf_action_exec+0x105/0x3f0 tcf_classify+0xf2/0x410 __dev_queue_xmit+0xcbf/0x2ae0 ip_finish_output2+0x711/0x1fb0 ip_output+0x1bf/0x4b0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x180c/0x2430 sock_sendmsg+0xdb/0x110 __sys_sendto+0x257/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa5/0x4e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fdeeb72e993 Code: 48 8b 0d e0 74 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 0d d6 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24 RSP: 002b:00007ffdb3de8a18 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055c81972b700 RCX: 00007fdeeb72e993 RDX: 0000000000000040 RSI: 000055c81972b700 RDI: 0000000000000003 RBP: 00007ffdb3dea130 R08: 000055c819728510 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 000055c81972b6c0 R14: 000055c81972969c R15: 0000000000000080 Fix this moving the check on 'nkeys' earlier in tcf_pedit_init(), so that attempts to install rules having 0 keys are always rejected with -EINVAL. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-23 11:04:43 +0100