summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* arm64: dts: qcom: sm8450: add RPMH_REGULATOR_LEVEL_LOW_SVS_D1Dmitry Baryshkov2022-12-282-8/+13
| | | | | | | | | | Add another power saving state used on SM8450. Unfortunately adding it in proper place causes renumbering of all the opp states in sm8450.dtsi Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221207012803.114959-2-dmitry.baryshkov@linaro.org
* arm64: dts: qcom: sdm670-google-sargo: keep pm660 ldo8 onRichard Acayan2022-12-281-0/+1
| | | | | | | | | | | | According to the downstream device tree, the regulator that powers the I/O for eMMC should not be turned off. Keep it always on just in case the eMMC driver fails and doesn't enable it, or unloads and disables it. Fixes: 07c8ded6e373 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees") Link: https://android.googlesource.com/kernel/msm/+/9ed6ddbe955d3b84d1416a1cf77e83904d1e8421/arch/arm64/boot/dts/google/sdm670-bonito-common.dtsi#105 Signed-off-by: Richard Acayan <mailingradian@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221205225237.200564-1-mailingradian@gmail.com
* arm64: dts: qcom: sc8280xp-x13s: move 'thermal-zones' nodeJohan Hovold2022-12-281-46/+46
| | | | | | | | | | Move the 'thermal-zones' node after the regulator nodes to restore the root-node sort order (alphabetically by node name). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221227170202.21618-1-johan+linaro@kernel.org
* arm64: dts: qcom: sdm845: Fix some whitespace/newlinesKonrad Dybcio2022-12-281-4/+2
| | | | | | | | | Remove unnecessary newlines and fix up whitespace near the soundwire controller node. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221212111037.98160-10-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm8150: Use lowercase hexKonrad Dybcio2022-12-281-1/+1
| | | | | | | | | Use lowercase hex, as that's the preferred and overwhermingly present style. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221212111037.98160-9-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm8250: Use lowercase hexKonrad Dybcio2022-12-281-17/+17
| | | | | | | | | Use lowercase hex, as that's the preferred and overwhermingly present style. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221212111037.98160-8-konrad.dybcio@linaro.org
* arm64: dts: qcom: sdm845: Use lowercase hexKonrad Dybcio2022-12-281-3/+3
| | | | | | | | | Use lowercase hex, as that's the preferred and overwhermingly present style. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221212111037.98160-7-konrad.dybcio@linaro.org
* arm64: dts: qcom: sdm660: Use lowercase hexKonrad Dybcio2022-12-281-7/+7
| | | | | | | | | Use lowercase hex, as that's the preferred and overwhermingly present style. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221212111037.98160-6-konrad.dybcio@linaro.org
* arm64: dts: qcom: sdm630: Use lowercase hexKonrad Dybcio2022-12-281-8/+8
| | | | | | | | | Use lowercase hex, as that's the preferred and overwhermingly present style. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221212111037.98160-5-konrad.dybcio@linaro.org
* arm64: dts: qcom: msm8998: Use lowercase hexKonrad Dybcio2022-12-281-7/+7
| | | | | | | | | Use lowercase hex, as that's the preferred and overwhermingly present style. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221212111037.98160-4-konrad.dybcio@linaro.org
* arm64: dts: qcom: msm8996: Use lowercase hexKonrad Dybcio2022-12-282-8/+8
| | | | | | | | | Use lowercase hex, as that's the preferred and overwhermingly present style. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221212111037.98160-3-konrad.dybcio@linaro.org
* arm64: dts: qcom: ipq6018: Use lowercase hexKonrad Dybcio2022-12-281-4/+4
| | | | | | | | | Use lowercase hex, as that's the preferred and overwhermingly present style. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221212111037.98160-2-konrad.dybcio@linaro.org
* arm64: dts: qcom: msm8996: Add additional A2NoC clocksKonrad Dybcio2022-12-281-2/+4
| | | | | | | | | | | | | | On eMMC devices, the UFS clocks aren't started in the bootloader (or well, at least it should not be, as that would just leak power..), which results in platform reboots when trying to access the unclocked UFS hardware, which unfortunately happens on each and every boot, as interconnect calls sync_state and goes over each and every path. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210200353.418391-6-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm8150-kumano: Configure resin as volume up keyMarijn Suijten2022-12-281-0/+5
| | | | | | | | | | The volume-up button on both kumanos (Xperia 1 and Xperia 5) are mapped to resin. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210142525.16974-3-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm8150-kumano: Add NXP PN553 NFCKonrad Dybcio2022-12-281-1/+11
| | | | | | | | | | | Add a node for NXP PN553 NFC (or PN557, unclear data), using the nxp-nci driver. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Xperia 1 and Xperia 5 Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210142525.16974-2-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm8150-kumano: Add GPIO keysKonrad Dybcio2022-12-281-0/+62
| | | | | | | | | | | Configure hardware buttons (V-, Camera Shutter/Focus) on Kumano devices. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Xperia 1 and Xperia 5 Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210142525.16974-1-konrad.dybcio@linaro.org
* arm64: dts: qcom: msm8996-tone: Move status lastKonrad Dybcio2022-12-281-15/+11
| | | | | | | | Align the style with other boards. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210141000.14344-2-konrad.dybcio@linaro.org
* arm64: dts: qcom: msm8996-tone: Enable SDHCI1Konrad Dybcio2022-12-281-7/+2
| | | | | | | | | | | With the recent patch that allowed us to reset the SDHCI controller from Linux, things started working properly. Enable SDHCI1, and by extension eMMC. Also, remove the now-useless cmdline SDHCI quirks. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210141000.14344-1-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm8250: move sound and codec nodes out of socKrzysztof Kozlowski2022-12-282-24/+22
| | | | | | | | | | | | | The sound and codec nodes are not a property of a soc, but rather board as it describes the sound configuration. It also does not have unit address: sm8250-hdk.dtb: soc@0: sound: {} should not be valid under {'type': 'object'} Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210115704.97614-4-krzysztof.kozlowski@linaro.org
* arm64: dts: qcom: sdm845: move sound node out of socKrzysztof Kozlowski2022-12-281-3/+3
| | | | | | | | | | | | The sound node is not a property of a soc, but rather board as it describes the sound configuration. It also does not have unit address: sdm845-shift-axolotl.dtb: soc@0: sound: {} should not be valid under {'type': 'object'} Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210115704.97614-3-krzysztof.kozlowski@linaro.org
* arm64: dts: qcom: sdm845: move DSI/QUP/QSPI opp tables out of SoC nodeKrzysztof Kozlowski2022-12-281-77/+77
| | | | | | | | | | | | | | | | | The SoC node is a simple-bus and its schema expect to have nodes only with unit addresses: sdm850-lenovo-yoga-c630.dtb: soc@0: opp-table-qup: {'compatible': ['operating-points-v2'], 'phandle': [[60]], 'opp-50000000': ... 'required-opps': [[55]]}} should not be valid under {'type': 'object'} Move to top-level OPP tables: - DSI and QUP which are shared between multiple nodes, - QSPI which cannot be placed in its node due to address/size cells. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210115704.97614-2-krzysztof.kozlowski@linaro.org
* arm64: dts: qcom: sc7180: move QUP and QSPI opp tables out of SoC nodeKrzysztof Kozlowski2022-12-281-38/+38
| | | | | | | | | | | | | | | | | The SoC node is a simple-bus and its schema expect to have nodes only with unit addresses: sc7180-trogdor-lazor-r3.dtb: soc@0: opp-table-qspi: {'compatible': ['operating-points-v2'], 'phandle': [[186]], 'opp-75000000': ... 'required-opps': [[47]]}} should not be valid under {'type': 'object'} Move to top-level OPP tables: - QUP which is shared between multiple nodes, - QSPI which cannot be placed in its node due to address/size cells. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210115704.97614-1-krzysztof.kozlowski@linaro.org
* arm64: dts: qcom: sdm845: drop 0x from unit addressKrzysztof Kozlowski2022-12-281-1/+1
| | | | | | | | By coding style, unit address should not start with 0x. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210113340.63833-1-krzysztof.kozlowski@linaro.org
* arm64: dts: qcom: sm6350: Fix up the ramoops nodeKonrad Dybcio2022-12-281-4/+3
| | | | | | | | | | | | | | | | Fix up the ramoops node to make it match bindings and style: - remove "removed-dma-pool" - don't pad size to 8 hex digits - change cc-size to ecc-size so that it's used - increase ecc-size from to 16 - remove the zeroed ftrace-size Fixes: 5f82b9cda61e ("arm64: dts: qcom: Add SM6350 device tree") Reported-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221210102600.589028-1-konrad.dybcio@linaro.org
* arm64: dts: qcom: Use plural _gpios node label for PMIC gpiosMarijn Suijten2022-12-2826-66/+66
| | | | | | | | | | | | | | | The gpio node in PMIC dts'es define access to multiple GPIOs. Most Qcom PMICs were already using the plural _gpios label to point to this node, but a few PMICs were left behind including the recently-pulled pm(i)8950. Rename it from *_gpio to *_gpios for pm6125, pm6150(l), pm8005, pm(i)8950, and pm(i)8998. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209220450.1793421-1-marijn.suijten@somainline.org
* arm64: dts: qcom: pmi8950: Correct rev_1250v channel label to mvMarijn Suijten2022-12-281-1/+1
| | | | | | | | | | | | This was pointed out in review but never followed up on thanks to sidetracked discussions about labels vs node names. Fixes: 0d97fdf380b4 ("arm64: dts: qcom: Add configuration for PMI8950 peripheral") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209215437.1783067-1-marijn.suijten@somainline.org
* arm64: dts: qcom: sm8150-kumano: Panel framebuffer is 2.5k instead of 4kMarijn Suijten2022-12-281-3/+4
| | | | | | | | | | | | | | | The framebuffer configuration for kumano griffin, written in kumano dtsi (which is overwritten in bahamut dts for its smaller panel) has to use a 1096x2560 configuration as this is what the panel (and framebuffer area) has been initialized to. Downstream userspace also has access to (and uses) this 2.5k mode by default, and only switches the panel to 4k when requested. Fixes: d0a6ce59ea4e ("arm64: dts: qcom: sm8150: Add support for SONY Xperia 1 / 5 (Kumano platform)") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209191733.1458031-1-marijn.suijten@somainline.org
* arm64: dts: qcom: sc7180: Add pazquel360 touschreenDouglas Anderson2022-12-281-0/+19
| | | | | | | | | | The touchscreen was supposed to have been added when pazquel360 first was added upstream but was missed. Add it now. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209091234.v3.4.Id132522bda31fd97684cb076a44a0907cd28097d@changeid
* arm64: dts: qcom: sc7180: Start the trogdor eDP/touchscreen regulator onDouglas Anderson2022-12-283-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that we've added the `off-on-delay-us` for the touchpanel regulator, we can see that we're actually hitting that delay at bootup. I saw about 200 ms of delay. Let's avoid that delay by starting the regulator on. We'll only do this for eDP devices for the time being. NOTE: we _won't_ do this for homestar. Homestar's panel really likes to be power cycled. It's why the Linux driver for this panel has a pm_runtime_put_sync_suspend() when the panel is being unprepared but the normal panel-edp driver doesn't. It's also why this hardware has a separate power rail for eDP vs. touchscreen, unlike all the other trogdor boards. We won't start homestar's regulator on. While this could mean a slight delay on homestar, it is probably a _correct_ delay. The bootloader might have left the regulator on (it does so in dev and recovery modes), so if we turned the regulator off at probe time and we actually hit the delay then we were probably violating T12 in the panel spec. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209091234.v3.3.I7050a61ba3a48e44b86053f265265b5e3c0cee31@changeid
* arm64: dts: qcom: sc7180: Add trogdor eDP/touchscreen regulator off-on-timeDouglas Anderson2022-12-282-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In general, the timing diagrams for components specify a minimum time for power cycling the component. When we remove power from a device we need to let the device fully discharge and get to a quiescent state before applying power again. If we power a device on too soon then it might not have fully powered off and might be in a weird in-between / invalid state. eDP panels typically have a time that's at least 500 ms here. You can see that in Linux's panel-edp driver nearly every device specifies a "unprepare" time of at least 500 ms. This is a common minimum and the 500 ms is even in the example in the eDP spec. In Linux, the "panel-edp" driver enforces this delay for its own control of the regulator, but the "panel-edp" driver can't do anything about other control of the regulator (for instance, by the touchpanel driver). Let's add 500 ms as a board constraint for the regulator that's used for eDP/touchpanel on trogdor boards. If a given trogdor board stuffs only panels that can use a shorter time or stuff some panels that need a larger time then they can manually adjust this timing. We'll only do this minimum delay for trogdor devices with eDP (ones that use either bridge chip), not for devices with MIPI panels. MIPI panels could have similar constraints but the 500 ms isn't necessarily as standard and there are no known cases where this delay is needed. For most trogdor boards, this doesn't actually seem to affect anything when testing against shipping Linux. However, with pazqel360 it seems that this does make a difference. It seems that the touchscreen on this board _also_ needs some time for the regulator to discharge. That time is much less than 500 ms, so we'll just put the eDP panel 500 ms in there since the board constraint should be the "max" of the components. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209091234.v3.2.I65ac577411b017eff50e7a4fda254e5583ccdc48@changeid
* arm64: dts: qcom: sc7180: Bump up trogdor ts_reset_l drive strengthDouglas Anderson2022-12-281-1/+9
| | | | | | | | | | | | | | | | | | | | | | | On at least one board (pazquel360) the reset line for the touchscreen was scoped and found to take almost 2 ms to fall when we drove it low. This wasn't great because the Linux driver for the touchscreen (the elants_i2c driver) thinks it can do a 500 us reset pulse. If we bump the drive strength to 8 mA then the reset line went down in ~421 us. NOTE: we could apply this fix just for pazquel360, but: * Probably other trogdor devices have similar timings and it's just that nobody has noticed it before. * There are other trogdor boards using the same elan driver that tries to do 500 us reset pulses. * Bumping the drive strength to 8mA across the board won't hurt. This isn't a high speed signal or anything. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209091234.v3.1.I39c387f1e3176fcf340039ec12d54047de9f8526@changeid
* arm64: dts: qcom: sm7225-fairphone-fp4: configure flash LEDLuca Weiss2022-12-281-0/+23
| | | | | | | | | Configure the pm6150l flash node for the dual flash LEDs found on FP4. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209-fp4-pm6150l-flash-v1-3-531521eb2a72@fairphone.com
* arm64: dts: qcom: pm6150l: add spmi-flash-led nodeLuca Weiss2022-12-281-0/+6
| | | | | | | | | | Add a node describing the flash block found on pm6150l. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209-fp4-pm6150l-flash-v1-2-531521eb2a72@fairphone.com
* arm64: dts: qcom: sm6115: Add thermal zonesKonrad Dybcio2022-12-281-0/+364
| | | | | | | | Add thermal zones associated with the on-SoC temperature sensors. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221209124026.178764-1-konrad.dybcio@linaro.org
* arm64: dts: qcom: Add Lenovo Tab P11 (J606F/XiaoXin Pad) dtsKonrad Dybcio2022-12-282-0/+290
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an initial device tree for the Lenovo Tab P11. Currently it enables: - simplefb - SD Card slot via SDHCI2 - gpio-keys & PON keys - UFS - RPM regulators - USB2 This has been validated with a rev (62) device. You can check yours next to the serial no. on the sticker in the lower portion of the back side of your tablet. To get a successful boot run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/\ sm6115p-lenovo-j606f.dtb > .Image.gz-dtb ~/mkbootimg/mkbootimg.py \ --kernel .Image.gz-dtb \ --ramdisk some/initrd.img \ --pagesize 4096 \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --tags_offset 0x100 \ --cmdline 'SOME_CMDLINE' \ --dtb_offset 0x1f00000 \ --header_version 1 \ --os_version 11 \ --os_patch_level 2022-11 \ -o j606f.img fastboot flash boot j606f.img fastboot flash dtbo empty.img fastboot flash recovery empty.img fastboot reboot Where empty.img is 2 zero-bytes. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221208201401.530555-5-konrad.dybcio@linaro.org
* dt-bindings: arm: qcom: Add SM6115(P) and Lenovo Tab P11Konrad Dybcio2022-12-281-0/+8
| | | | | | | | | | | | | | Document SM6115P, an APQ version of SM6115. Document Lenovo Tab P11 (J606F) as a SM6115P device. Add SM6115 to the msm-id list of shame. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221208201401.530555-4-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm6115: Provide real SMD RPM XO to SDC1/2Konrad Dybcio2022-12-281-2/+4
| | | | | | | | | | Since we have a functioning RPM clock driver, let's make use of it and provide the real XO clock to clients, instead of the fixed-clock stub. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221208201401.530555-3-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm6115: Provide xo clk to rpmccKonrad Dybcio2022-12-281-0/+2
| | | | | | | | | | | | | | | rpmcc used to rely on global clock lookup (and still does so for backwards compat reasons) of "xo_board", which was common back when we did not care about things like underscores in node names. Nowadays it expects to be fed a reference to the fixed clock. Satisfy that requirement to make sure rpm clock rates are not all stuck at zero. Fixes: 97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi") Reported-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221208201401.530555-2-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm6115: Fix UFS nodeKonrad Dybcio2022-12-281-2/+3
| | | | | | | | | | | | | | | In its current form, UFS did not even probe successfully - it failed when trying to set XO (ref_clk) to 300 MHz instead of doing so to the ICE clk. Moreover, the missing reg-names prevented ICE from working or being discovered at all. Fix both of these issues. As a sidenote, the log reveals that this SoC uses UFS ICE v3.1.0. Fixes: 97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Iskren Chernev <me@iskren.info> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221208201401.530555-1-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm7225-fairphone-fp4: Add pmk8350 PMICLuca Weiss2022-12-281-0/+19
| | | | | | | | | | | | | The PMK8350 (which is actually a PMK8003) is used for the RTC and has ADC for thermals. Since the adc_tm compatible used in PMK8350 is not yet supported, skip configuring that and the associated thermal zone for now. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221207084045.270172-1-luca.weiss@fairphone.com
* arm64: dts: qcom: sdm670: add missing usb hstx nvmem cellRichard Acayan2022-12-281-0/+7
| | | | | | | | | | This nvmem cell is present on SDM670 as well as SDM845. Add it in SDM670 so there is proper tuning. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221206231729.164453-3-mailingradian@gmail.com
* arm64: dts: qcom: sdm670: add qfprom nodeRichard Acayan2022-12-281-0/+7
| | | | | | | | | | | | Some hardware quirks and capabilities can be determined by reading the fuse-programmable read-only memory. Add the QFPROM node so consumers know if they need to do anything extra to support the hardware. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221206231729.164453-2-mailingradian@gmail.com
* arm64: dts: qcom: sdm632-fairphone-fp3: Add NFCLuca Weiss2022-12-281-0/+15
| | | | | | | | | | Configure the node for the NQ310 chip found on this device, which is compatible with generic nxp-nci-i2c driver. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221128173744.833018-2-luca@z3ntu.xyz
* arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for ↵Krzysztof Kozlowski2022-12-281-1/+1
| | | | | | | | | | | | | | | LP5562 LED The preferred name suffix for properties with single and multiple GPIOs is "gpios". Linux GPIO core code supports both. Bindings are going to expect the "gpios" one: qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221127203240.54955-1-krzysztof.kozlowski@linaro.org
* arm64: dts: qcom: msm8996-tone: Fix USB taking 6 minutes to wake upKonrad Dybcio2022-12-281-4/+1
| | | | | | | | | | | | | | The hardware turns out to be pretty sluggish at assuming it can only do USB2 with just a USB2 phy assigned to it - before it needed about 6 minutes to acknowledge that. Limit it to USB-HS explicitly to make USB come up about 720x faster. Fixes: 9da65e441d4d ("arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform)") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221124220147.102611-1-konrad.dybcio@linaro.org
* arm64: dts: qcom: sc8280xp-x13s: Add soundcard supportSrinivas Kandagatla2022-12-281-0/+213
| | | | | | | | | | | | Add support for SoundCard on X13s. This patch adds support for Headset Playback, record and 2 DMICs on the Panel along with the regulators required for powering up the LPASS codecs. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221123104342.26140-4-srinivas.kandagatla@linaro.org
* arm64: dts: qcom: sc8280xp: add SoundWire and LPASSSrinivas Kandagatla2022-12-281-0/+320
| | | | | | | | | | | Add LPASS Codecs along with SoundWire controller for TX, RX, WSA and VA macros along with LPASS LPI pinctrl node. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221123104342.26140-3-srinivas.kandagatla@linaro.org
* arm64: dts: qcom: sc8280xp: add gpr nodeSrinivas Kandagatla2022-12-281-0/+39
| | | | | | | | | | | Add GPR node along with APM(Audio Process Manager) and PRM(Proxy resource Manager) audio services. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221123104342.26140-2-srinivas.kandagatla@linaro.org
* arm64: dts: qcom: sm8350-sagami: Add GPIO line names for PMIC GPIOsKonrad Dybcio2022-12-273-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the PDX213&214 DTSIs to better document the hardware. Diff between 223 and 224: pm8350b < gpio-line-names = "NC", /* GPIO_1 */ > gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */ < "NC", > "CAM_PWR_LD_EN", pm8350c < "NC", > "WLC_TXPWR_EN", Which is due to different camera power wiring on 213 and lack of an additional SLG51000 PMIC on 214. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118152028.59312-3-konrad.dybcio@linaro.org
* arm64: dts: qcom: sm8350-sagami: Configure SLG51000 PMIC on PDX215Konrad Dybcio2022-12-272-1/+67
| | | | | | | | | Remove the mention of this PMIC from the common DTSI, as it's not used on PDX214. Add the required nodes to support it on PDX215. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118152028.59312-2-konrad.dybcio@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-24 07:21:58 +0100