summaryrefslogtreecommitdiffstats
path: root/Documentation/dev-tools/kasan.rst (unfollow)
Commit message (Collapse)AuthorFilesLines
2022-08-28.mailmap: update Luca Ceresoli's e-mail addressLuca Ceresoli1-0/+1
My Bootlin address is preferred from now on. Link: https://lkml.kernel.org/r/20220826130515.3011951-1-luca.ceresoli@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Atish Patra <atishp@atishpatra.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28mm/mprotect: only reference swap pfn page if type matchPeter Xu1-1/+2
Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]: kernel BUG at include/linux/swapops.h:117! CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S O L 6.0.0-dbg-DEV #2 RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0 Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6 c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b 48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48 RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282 RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000 RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000 R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738 R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a FS: 00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> change_pte_range+0x36e/0x880 change_p4d_range+0x2e8/0x670 change_protection_range+0x14e/0x2c0 mprotect_fixup+0x1ee/0x330 do_mprotect_pkey+0x34c/0x440 __x64_sys_mprotect+0x1d/0x30 It triggers because pfn_swap_entry_to_page() could be called upon e.g. a genuine swap entry. Fix it by only calling it when it's a write migration entry where the page* is used. [1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220823221138.45602-1-peterx@redhat.com Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Yu Zhao <yuzhao@google.com> Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28squashfs: don't call kmalloc in decompressorsPhillip Lougher4-21/+22
The decompressors may be called while in an atomic section. So move the kmalloc() out of this path, and into the "page actor" init function. This fixes a regression introduced by commit f268eedddf35 ("squashfs: extend "page actor" to handle missing pages") Link: https://lkml.kernel.org/r/20220822215430.15933-1-phillip@squashfs.org.uk Fixes: f268eedddf35 ("squashfs: extend "page actor" to handle missing pages") Reported-by: Chris Murphy <lists@colorremedies.com> Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28mm/damon/dbgfs: avoid duplicate context directory creationBadari Pulavarty1-0/+3
When user tries to create a DAMON context via the DAMON debugfs interface with a name of an already existing context, the context directory creation fails but a new context is created and added in the internal data structure, due to absence of the directory creation success check. As a result, memory could leak and DAMON cannot be turned on. An example test case is as below: # cd /sys/kernel/debug/damon/ # echo "off" > monitor_on # echo paddr > target_ids # echo "abc" > mk_context # echo "abc" > mk_context # echo $$ > abc/target_ids # echo "on" > monitor_on <<< fails Return value of 'debugfs_create_dir()' is expected to be ignored in general, but this is an exceptional case as DAMON feature is depending on the debugfs functionality and it has the potential duplicate name issue. This commit therefore fixes the issue by checking the directory creation failure and immediately return the error in the case. Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org Fixes: 75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts") Signed-off-by: Badari Pulavarty <badari.pulavarty@intel.com> Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [ 5.15.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28mailmap: update email address for Colin KingColin Ian King1-2/+1
Colin King is working on kernel janitorial fixes in his spare time and using his Intel email is confusing. Use his gmail account as the default email address. Link: https://lkml.kernel.org/r/20220817212753.101109-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28asm-generic: sections: refactor memory_intersectsQuanyang Wang1-2/+5
There are two problems with the current code of memory_intersects: First, it doesn't check whether the region (begin, end) falls inside the region (virt, vend), that is (virt < begin && vend > end). The second problem is if vend is equal to begin, it will return true but this is wrong since vend (virt + size) is not the last address of the memory region but (virt + size -1) is. The wrong determination will trigger the misreporting when the function check_for_illegal_area calls memory_intersects to check if the dma region intersects with stext region. The misreporting is as below (stext is at 0x80100000): WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536] Modules linked in: CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5 Hardware name: Xilinx Zynq Platform unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xb0/0x198 __warn from warn_slowpath_fmt+0x80/0xb4 warn_slowpath_fmt from check_for_illegal_area+0x130/0x168 check_for_illegal_area from debug_dma_map_sg+0x94/0x368 debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128 __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24 dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4 usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214 usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118 usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70 usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360 usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440 usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238 usb_stor_control_thread from kthread+0xf8/0x104 kthread from ret_from_fork+0x14/0x2c Refactor memory_intersects to fix the two problems above. Before the 1d7db834a027e ("dma-debug: use memory_intersects() directly"), memory_intersects is called only by printk_late_init: printk_late_init -> init_section_intersects ->memory_intersects. There were few places where memory_intersects was called. When commit 1d7db834a027e ("dma-debug: use memory_intersects() directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA subsystem uses it to check for an illegal area and the calltrace above is triggered. [akpm@linux-foundation.org: fix nearby comment typo] Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com Fixes: 979559362516 ("asm/sections: add helpers to check for section data") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <treding@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28bootmem: remove the vmemmap pages from kmemleak in put_page_bootmemLiu Shixin1-0/+2
The vmemmap pages is marked by kmemleak when allocated from memblock. Remove it from kmemleak when freeing the page. Otherwise, when we reuse the page, kmemleak may report such an error and then stop working. kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing) kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff98fb6be00000 (size 335544320): kmemleak: comm "swapper", pid 0, jiffies 4294892296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: Link: https://lkml.kernel.org/r/20220819094005.2928241-1-liushixin2@huawei.com Fixes: f41f2ed43ca5 (mm: hugetlb: free the vmemmap pages associated with each HugeTLB page) Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdownHeming Zhao2-5/+6
After commit 0737e01de9c4 ("ocfs2: ocfs2_mount_volume does cleanup job before return error"), any procedure after ocfs2_dlm_init() fails will trigger crash when calling ocfs2_dlm_shutdown(). ie: On local mount mode, no dlm resource is initialized. If ocfs2_mount_volume() fails in ocfs2_find_slot(), error handling will call ocfs2_dlm_shutdown(), then does dlm resource cleanup job, which will trigger kernel crash. This solution should bypass uninitialized resources in ocfs2_dlm_shutdown(). Link: https://lkml.kernel.org/r/20220815085754.20417-1-heming.zhao@suse.com Fixes: 0737e01de9c4 ("ocfs2: ocfs2_mount_volume does cleanup job before return error") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28Revert "memcg: cleanup racy sum avoidance code"Shakeel Butt1-2/+13
This reverts commit 96e51ccf1af33e82f429a0d6baebba29c6448d0f. Recently we started running the kernel with rstat infrastructure on production traffic and begin to see negative memcg stats values. Particularly the 'sock' stat is the one which we observed having negative value. $ grep "sock " /mnt/memory/job/memory.stat sock 253952 total_sock 18446744073708724224 Re-run after couple of seconds $ grep "sock " /mnt/memory/job/memory.stat sock 253952 total_sock 53248 For now we are only seeing this issue on large machines (256 CPUs) and only with 'sock' stat. I think the networking stack increase the stat on one cpu and decrease it on another cpu much more often. So, this negative sock is due to rstat flusher flushing the stats on the CPU that has seen the decrement of sock but missed the CPU that has increments. A typical race condition. For easy stable backport, revert is the most simple solution. For long term solution, I am thinking of two directions. First is just reduce the race window by optimizing the rstat flusher. Second is if the reader sees a negative stat value, force flush and restart the stat collection. Basically retry but limited. Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com Fixes: 96e51ccf1af33e8 ("memcg: cleanup racy sum avoidance code") Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: "Michal Koutný" <mkoutny@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: David Hildenbrand <david@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> [5.15] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28mm/zsmalloc: do not attempt to free IS_ERR handleSergey Senozhatsky1-1/+1
zsmalloc() now returns ERR_PTR values as handles, which zram accidentally can pass to zs_free(). Another bad scenario is when zcomp_compress() fails - handle has default -ENOMEM value, and zs_free() will try to free that "pointer value". Add the missing check and make sure that zs_free() bails out when ERR_PTR() is passed to it. Link: https://lkml.kernel.org/r/20220816050906.2583956-1-senozhatsky@chromium.org Fixes: c7e6f17b52e9 ("zsmalloc: zs_malloc: return ERR_PTR on failure") Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28binder_alloc: add missing mmap_lock calls when using the VMALiam Howlett1-10/+21
Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages() and when checking for a VMA in binder_alloc_new_buf_locked(). It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock after it verifies a VMA exists, but may be taken again deeper in the call stack, if necessary. Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com Fixes: a43cfc87caaf (android: binder: stop saving a pointer to the VMA) Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Ondrej Mosnacek <omosnace@redhat.com> Reported-by: <syzbot+a7b60a176ec13cafb793@syzkaller.appspotmail.com> Acked-by: Carlos Llamas <cmllamas@google.com> Tested-by: Ondrej Mosnacek <omosnace@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Christian Brauner (Microsoft) <brauner@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Martijn Coenen <maco@android.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Todd Kjos <tkjos@android.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: "Arve Hjønnevåg" <arve@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28mm: re-allow pinning of zero pfns (again)Alex Williamson1-3/+10
The below referenced commit makes the same error as 1c563432588d ("mm: fix is_pinnable_page against a cma page"), re-interpreting the logic to exclude pinning of the zero page, which breaks device assignment with vfio. To avoid further subtle mistakes, split the logic into discrete tests. [akpm@linux-foundation.org: simplify comment, per John] Link: https://lkml.kernel.org/r/166015037385.760108.16881097713975517242.stgit@omen Link: https://lore.kernel.org/all/165490039431.944052.12458624139225785964.stgit@omen Fixes: f25cbb7a95a2 ("mm: add zone device coherent type memory support") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Suggested-by: Felix Kuehling <felix.kuehling@amd.com> Tested-by: Slawomir Laba <slawomirx.laba@intel.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Alistair Popple <apopple@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28vmcoreinfo: add kallsyms_num_syms symbolStephen Brennan1-0/+1
The rest of the kallsyms symbols are useless without knowing the number of symbols in the table. In an earlier patch, I somehow dropped the kallsyms_num_syms symbol, so add it back in. Link: https://lkml.kernel.org/r/20220808205410.18590-1-stephen.s.brennan@oracle.com Fixes: 5fd8fea935a1 ("vmcoreinfo: include kallsyms symbols") Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28mailmap: update Guilherme G. Piccoli's email addressesGuilherme G. Piccoli1-0/+2
Both @canonical and @ibm email addresses are invalid now; use my personal address instead. Link: https://lkml.kernel.org/r/20220804202207.439427-1-gpiccoli@igalia.com Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28writeback: avoid use-after-free after removing deviceKhazhismel Kumykov3-12/+16
When a disk is removed, bdi_unregister gets called to stop further writeback and wait for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation dwork after this has completed, which can result in the timer attempting to access the just freed bdi_writeback. Fix this by checking if the bdi_writeback is alive, similar to when scheduling writeback work. Since this requires wb->work_lock, and wb_inode_writeback_end() may get called from interrupt, switch wb->work_lock to an irqsafe lock. Link: https://lkml.kernel.org/r/20220801155034.3772543-1-khazhy@google.com Fixes: 45a2966fd641 ("writeback: fix bandwidth estimate for spiky workload") Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Michael Stapelberg <stapelberg+linux@google.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28shmem: update folio if shmem_replace_page() updates the pageMatthew Wilcox (Oracle)1-0/+1
If we allocate a new page, we need to make sure that our folio matches that new page. If we do end up in this code path, we store the wrong page in the shmem inode's page cache, and I would rather imagine that data corruption ensues. This will be solved by changing shmem_replace_page() to shmem_replace_folio(), but this is the minimal fix. Link: https://lkml.kernel.org/r/20220730042518.1264767-1-willy@infradead.org Fixes: da08e9b79323 ("mm/shmem: convert shmem_swapin_page() to shmem_swapin_folio()") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-28mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pteMiaohe Lin1-1/+1
In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page cache are installed in the ptes. But hugepage_add_new_anon_rmap is called for them mistakenly because they're not vm_shared. This will corrupt the page->mapping used by page cache code. Link: https://lkml.kernel.org/r/20220712130542.18836-1-linmiaohe@huawei.com Fixes: f619147104c8 ("userfaultfd: add UFFDIO_CONTINUE ioctl") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-27provide arch_test_bit_acquire for architectures that define test_bitMikulas Patocka6-33/+25
Some architectures define their own arch_test_bit and they also need arch_test_bit_acquire, otherwise they won't compile. We also clean up the code by using the generic test_bit if that is equivalent to the arch-specific version. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: 8238b4579866 ("wait_on_bit: add an acquire memory barrier") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-27perf stat: Capitalize topdown metrics' namesZhengjun Xing1-12/+12
Capitalize topdown metrics' names to follow the intel SDM. Before: # ./perf stat -a sleep 1 Performance counter stats for 'system wide': 228,094.05 msec cpu-clock # 225.026 CPUs utilized 842 context-switches # 3.691 /sec 224 cpu-migrations # 0.982 /sec 70 page-faults # 0.307 /sec 23,164,105 cycles # 0.000 GHz 29,403,446 instructions # 1.27 insn per cycle 5,268,185 branches # 23.097 K/sec 33,239 branch-misses # 0.63% of all branches 136,248,990 slots # 597.337 K/sec 32,976,450 topdown-retiring # 24.2% retiring 4,651,918 topdown-bad-spec # 3.4% bad speculation 26,148,695 topdown-fe-bound # 19.2% frontend bound 72,515,776 topdown-be-bound # 53.2% backend bound 6,008,540 topdown-heavy-ops # 4.4% heavy operations # 19.8% light operations 3,934,049 topdown-br-mispredict # 2.9% branch mispredict # 0.5% machine clears 16,655,439 topdown-fetch-lat # 12.2% fetch latency # 7.0% fetch bandwidth 41,635,972 topdown-mem-bound # 30.5% memory bound # 22.7% Core bound 1.013634593 seconds time elapsed After: # ./perf stat -a sleep 1 Performance counter stats for 'system wide': 228,081.94 msec cpu-clock # 225.003 CPUs utilized 824 context-switches # 3.613 /sec 224 cpu-migrations # 0.982 /sec 67 page-faults # 0.294 /sec 22,647,423 cycles # 0.000 GHz 28,870,551 instructions # 1.27 insn per cycle 5,167,099 branches # 22.655 K/sec 32,383 branch-misses # 0.63% of all branches 133,411,074 slots # 584.926 K/sec 32,352,607 topdown-retiring # 24.3% Retiring 4,456,977 topdown-bad-spec # 3.3% Bad Speculation 25,626,487 topdown-fe-bound # 19.2% Frontend Bound 70,955,316 topdown-be-bound # 53.2% Backend Bound 5,834,844 topdown-heavy-ops # 4.4% Heavy Operations # 19.9% Light Operations 3,738,781 topdown-br-mispredict # 2.8% Branch Mispredict # 0.5% Machine Clears 16,286,803 topdown-fetch-lat # 12.2% Fetch Latency # 7.0% Fetch Bandwidth 40,802,069 topdown-mem-bound # 30.6% Memory Bound # 22.6% Core Bound 1.013683125 seconds time elapsed Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220825015458.3252239-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf docs: Update the documentation for the save_type filterKan Liang1-0/+3
Update the documentation to reflect the kernel changes. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220816125612.2042397-2-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf sched: Fix memory leaks in __cmd_record detected with -fsanitize=addressIan Rogers1-5/+19
An array of strings is passed to cmd_record but not freed. As cmd_record modifies the array, add another array as a copy that can be mutated allowing the original array contents to all be freed. Detected with -fsanitize=address. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220824145733.409005-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf record: Fix manpage formatting of description of support to hybrid systemsAndi Kleen2-12/+2
The Intel hybrid description is written in a different style than the rest of the perf record man page. There were some new command line options added after it which resulted in very strange section ordering. Move the hybrid include last. Also the sub sections in the hybrid document don't fit the record manpage well (especially since it talks about all kinds of unrelated commands). I left this for now, but would be better to separate this properly in the different man pages. It would be better to use sub sections for the other sections, but these don't seem to be supported in AsciiDoc? Some of the examples are still misrendered in the manpage with an indented troff command, but I don't know how to fix that. In any case it's now better than before. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220818100127.249401-1-ak@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf test: Stat test for repeat with a weak groupIan Rogers1-0/+19
Breaking a weak group requires multiple passes of an evlist, with multiple runs this can introduce bugs ultimately leading to segfaults. Add a test to cover this. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220822213352.75721-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf stat: Clear evsel->reset_group for each stat runIan Rogers1-0/+1
If a weak group is broken then the reset_group flag remains set for the next run. Having reset_group set means the counter isn't created and ultimately a segfault. A simple reproduction of this is: # perf stat -r2 -e '{cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles,cycles}:W which will be added as a test in the next patch. Fixes: 4804e0111662d7d8 ("perf stat: Use affinity for opening events") Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20220822213352.75721-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27tools kvm headers arm64: Update KVM header from the kernel sourcesArnaldo Carvalho de Melo1-2/+4
To pick the changes from: ae3b1da95413614f ("KVM: arm64: Fix compile error due to sign extension") That doesn't result in any changes in tooling (when built on x86), only addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/all/YwOMCCc4E79FuvDe@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf python: Fix build when PYTHON_CONFIG is user suppliedJames Clark1-1/+1
The previous change to Python autodetection had a small mistake where the auto value was used to determine the Python binary, rather than the user supplied value. The Python binary is only used for one part of the build process, rather than the final linking, so it was producing correct builds in most scenarios, especially when the auto detected value matched what the user wanted, or the system only had a valid set of Pythons. Change it so that the Python binary path is derived from either the PYTHON_CONFIG value or PYTHON value, depending on what is specified by the user. This was the original intention. This error was spotted in a build failure an odd cross compilation environment after commit 4c41cb46a732fe82 ("perf python: Prefer python3") was merged. Fixes: 630af16eee495f58 ("perf tools: Use Python devtools for version autodetection rather than runtime") Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220728093946.1337642-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-27perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMUStephane Eranian1-1/+17
Existing code was generating bogus counts for the SNB IMC bandwidth counters: $ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/ 1.000327813 1,024.03 MiB uncore_imc/data_reads/ 1.000327813 20.73 MiB uncore_imc/data_writes/ 2.000580153 261,120.00 MiB uncore_imc/data_reads/ 2.000580153 23.28 MiB uncore_imc/data_writes/ The problem was introduced by commit: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC") Where the read_counter callback was replace to point to the generic uncore_mmio_read_counter() function. The SNB IMC counters are freerunnig 32-bit counters laid out contiguously in MMIO. But uncore_mmio_read_counter() is using a readq() call to read from MMIO therefore reading 64-bit from MMIO. Although this is okay for the uncore_perf_event_update() function because it is shifting the value based on the actual counter width to compute a delta, it is not okay for the uncore_pmu_event_start() which is simply reading the counter and therefore priming the event->prev_count with a bogus value which is responsible for causing bogus deltas in the perf stat command above. The fix is to reintroduce the custom callback for read_counter for the SNB IMC PMU and use readl() instead of readq(). With the change the output of perf stat is back to normal: $ perf stat -a -I 1000 -e uncore_imc/data_reads/,uncore_imc/data_writes/ 1.000120987 296.94 MiB uncore_imc/data_reads/ 1.000120987 138.42 MiB uncore_imc/data_writes/ 2.000403144 175.91 MiB uncore_imc/data_reads/ 2.000403144 68.50 MiB uncore_imc/data_writes/ Fixes: 07ce734dd8ad ("perf/x86/intel/uncore: Clean up client IMC") Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20220803160031.1379788-1-eranian@google.com
2022-08-26fbdev: fbcon: Properly revert changes when vc_resize() failedShigeru Yoshida1-2/+25
fbcon_do_set_font() calls vc_resize() when font size is changed. However, if if vc_resize() failed, current implementation doesn't revert changes for font size, and this causes inconsistent state. syzbot reported unable to handle page fault due to this issue [1]. syzbot's repro uses fault injection which cause failure for memory allocation, so vc_resize() failed. This patch fixes this issue by properly revert changes for font related date when vc_resize() failed. Link: https://syzkaller.appspot.com/bug?id=3443d3a1fa6d964dd7310a0cb1696d165a3e07c4 [1] Reported-by: syzbot+a168dbeaaa7778273c1b@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@vger.kernel.org # 5.15+
2022-08-26wait_on_bit: add an acquire memory barrierMikulas Patocka10-12/+60
There are several places in the kernel where wait_on_bit is not followed by a memory barrier (for example, in drivers/md/dm-bufio.c:new_read). On architectures with weak memory ordering, it may happen that memory accesses that follow wait_on_bit are reordered before wait_on_bit and they may return invalid data. Fix this class of bugs by introducing a new function "test_bit_acquire" that works like test_bit, but has acquire memory ordering semantics. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Will Deacon <will@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-25audit: move audit_return_fixup before the filtersRichard Guy Briggs1-2/+2
The success and return_code are needed by the filters. Move audit_return_fixup() before the filters. This was causing syscall auditing events to be missed. Link: https://github.com/linux-audit/audit-kernel/issues/138 Cc: stable@vger.kernel.org Fixes: 12c5e81d3fd0 ("audit: prepare audit_context for use in calling contexts beyond syscalls") Signed-off-by: Richard Guy Briggs <rgb@redhat.com> [PM: manual merge required] Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-08-25net: lantiq_xrx200: restore buffer if memory allocation failedAleksander Jan Bajkowski1-0/+1
In a situation where memory allocation fails, an invalid buffer address is stored. When this descriptor is used again, the system panics in the build_skb() function when accessing memory. Fixes: 7ea6cd16f159 ("lantiq: net: fix duplicated skb in rx descriptor ring") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25net: lantiq_xrx200: fix lock under memory pressureAleksander Jan Bajkowski1-1/+1
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll function immediately returns an error. This is incorrect for two reasons: * the function terminates without enabling interrupts or scheduling NAPI, * the error code (-ENOMEM) is returned instead of the number of received packets. After the first memory allocation failure occurs, packet reception is locked due to disabled interrupts from DMA.. Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25net: lantiq_xrx200: confirm skb is allocated before usingAleksander Jan Bajkowski1-0/+6
xrx200_hw_receive() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. Add a check in case build_skb() failed to allocate and return NULL. Fixes: e015593573b3 ("net: lantiq_xrx200: convert to build_skb") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25net: stmmac: work around sporadic tx issue on link-upHeiner Kallweit2-6/+11
This is a follow-up to the discussion in [0]. It seems to me that at least the IP version used on Amlogic SoC's sometimes has a problem if register MAC_CTRL_REG is written whilst the chip is still processing a previous write. But that's just a guess. Adding a delay between two writes to this register helps, but we can also simply omit the offending second write. This patch uses the second approach and is based on a suggestion from Qi Duan. Benefit of this approach is that we can save few register writes, also on not affected chip versions. [0] https://www.spinics.net/lists/netdev/msg831526.html Fixes: bfab27a146ed ("stmmac: add the experimental PCI support") Suggested-by: Qi Duan <qi.duan@amlogic.com> Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25ionic: VF initial random MAC address if no assigned macR Mohamed Shah1-5/+87
Assign a random mac address to the VF interface station address if it boots with a zero mac address in order to match similar behavior seen in other VF drivers. Handle the errors where the older firmware does not allow the VF to set its own station address. Newer firmware will allow the VF to set the station mac address if it hasn't already been set administratively through the PF. Setting it will also be allowed if the VF has trust. Fixes: fbb39807e9ae ("ionic: support sr-iov operations") Signed-off-by: R Mohamed Shah <mohamed@pensando.io> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25ionic: fix up issues with handling EAGAIN on FW cmdsShannon Nelson1-1/+3
In looping on FW update tests we occasionally see the FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop waiting for the FW activate step to finsh inside the FW. The firmware is complaining that the done bit is set when a new dev_cmd is going to be processed. Doing a clean on the cmd registers and doorbell before exiting the wait-for-done and cleaning the done bit before the sleep prevents this from occurring. Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25ionic: clear broken state on generation changeShannon Nelson1-0/+3
There is a case found in heavy testing where a link flap happens just before a firmware Recovery event and the driver gets stuck in the BROKEN state. This comes from the driver getting interrupted by a FW generation change when coming back up from the link flap, and the call to ionic_start_queues() in ionic_link_status_check() fails. This can be addressed by having the fw_up code clear the BROKEN bit if seen, rather than waiting for a user to manually force the interface down and then back up. Fixes: 9e8eaf8427b6 ("ionic: stop watchdog when in broken state") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25rxrpc: Fix locking in rxrpc's sendmsgDavid Howells2-39/+57
Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this] Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com cc: Hawkins Jiawei <yin31149@gmail.com> cc: Khalid Masum <khalid.masum.92@gmail.com> cc: Dan Carpenter <dan.carpenter@oracle.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-25drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctlyQu Huang1-0/+1
The mmVM_L2_CNTL3 register is not assigned an initial value Signed-off-by: Qu Huang <jinsdb@126.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: add MGCG perfmon setting for gfx11Likun Gao2-0/+18
Enable GFX11 MGCG perfmon setting. V2: set rlc to saft mode before setting. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdkfd: Fix isa version for the GC 10.3.7Prike Liang1-5/+1
Correct the isa version for handling KFD test. Fixes: 7c4f4f197e0c ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions") Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Aaron Liu <aaron.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: Fix page table setup on ArcturusMukul Joshi1-2/+10
When translate_further is enabled, page table depth needs to be updated. This was missing on Arcturus MMHUB init. This was causing address translations to fail for SDMA user-mode queues. Fixes: 352e683b72e7 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/pm: update SMU 13.0.0 driver_if headerEvan Quan2-14/+19
To fit the latest 78.53 PMFW. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: add sdma instance check for gfx11 CGCGTim Huang1-6/+12
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance, so not need to configure SDMA1_RLC_CGCG_CTRL for this case. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: enable PCON support for dcn314Roman Li1-0/+1
[Why] DCN314 supports PCON. [How] Explicitly enable it in dcn314 resources. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: enable NBIO IP v7.7.0 Clock GatingTim Huang1-4/+3
Enable AMD_CG_SUPPORT_BIF_MGCG and AMD_CG_SUPPORT_BIF_LS support. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: add NBIO IP v7.7.0 Clock Gating supportTim Huang1-0/+78
Add BIF Clock Gating MGCG and LS support for NBIO IP v7.7.0. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amdgpu: add TX_POWER_CTRL_1 macro definitions for NBIO IP v7.7.0Tim Huang2-0/+15
Add the BIF0_PCIE_TX_POWER_CTRL_1 register offset and mask macro definitions for AMD_CG_SUPPORT_BIF_LS. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()Tetsuo Handa1-0/+2
syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at cpuset_attach() [1], for commit 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that cpuset_attach() is also called from cgroup_attach_task_all(). Add cpus_read_lock() like what cgroup_procs_write_start() does. Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e [1] Reported-by: syzbot <syzbot+29d3a3b4d86c8136ad9e@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") Signed-off-by: Tejun Heo <tj@kernel.org>
2022-08-25xen/privcmd: fix error exit of privcmd_ioctl_dm_op()Juergen Gross1-10/+11
The error exit of privcmd_ioctl_dm_op() is calling unlock_pages() potentially with pages being NULL, leading to a NULL dereference. Additionally lock_pages() doesn't check for pin_user_pages_fast() having been completely successful, resulting in potentially not locking all pages into memory. This could result in sporadic failures when using the related memory in user mode. Fix all of that by calling unlock_pages() always with the real number of pinned pages, which will be zero in case pages being NULL, and by checking the number of pages pinned by pin_user_pages_fast() matching the expected number of pages. Cc: <stable@vger.kernel.org> Fixes: ab520be8cd5d ("xen/privcmd: Add IOCTL_PRIVCMD_DM_OP") Reported-by: Rustam Subkhankulov <subkhankulov@ispras.ru> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Link: https://lore.kernel.org/r/20220825141918.3581-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>