summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/arm/fsl.yaml (follow)
Commit message (Collapse)AuthorAgeFilesLines
* dt-bindings: arm: fsl: add compatible strings for Kobo Clara 2EAndreas Kemnade2024-11-041-0/+8
| | | | | | | | | Adds compatible strings for the Kobo Clara 2E eBook reader. There are two variants differing in the EPD PMIC used. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add Boundary Device Nitrogen8MP Universal SMARC ↵Bhavin Sharma2024-11-011-0/+6
| | | | | | | | | | | Carrier Board Adds support for the Nitrogen8MP SMARC System on Module and the Nitrogen8MP Universal SMARC Carrier Board. Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add Gateworks GW82XX-2x dev kitTim Harvey2024-11-011-0/+1
| | | | | | | | | Adds support for the Gateworks GW82XX-2X development kit based on a GW82XX baseboard and a GW702X System On Module. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Document i.MX6DL DHCOM SoM on PDK2 carrier boardMarek Vasut2024-10-221-2/+4
| | | | | | | | | | | | | | | | Document the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation board. The evaluation board features three serial ports, USB OTG, USB host with an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio, PCIe and HDMI video output. All of the aforementioned features except for mSATA are supported, mSATA is not available on i.MX6DL and is only available on DHCOM populated with i.MX6Q SoC which is already supported upstream. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Document DH electronics i.MX8M Plus DHCOM PicoITXMarek Vasut2024-10-181-0/+1
| | | | | | | | | Document support for DH electronics i.MX8M Plus DHCOM SoM on PicoITX carrier board. This system is populated with serial console, EQoS ethernet, eMMC, SD, SPI NOR, LEDs and USB 3.0 host used in USB 2.0 mode on PicoITX. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Document DH i.MX8MP DHCOM SoM on DRC02 carrier boardMarek Vasut2024-10-181-0/+1
| | | | | | | | | Document support for DH electronics i.MX8MP DHCOM SoM on DRC02 carrier board. This system is populated with two ethernet ports, two CANs, RS485 and RS232, USB, capacitive buttons and an OLED display. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy boardMichal Vokáč2024-10-171-0/+1
| | | | | | | | | | Add new board from the Y Soft IOTA family. This one is based on the i.MX8MP SoC. It is basically a stripped-down clone of the EVK board with some minor additions. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: freescale: Add verdin imx8mp ivy boardJoão Paulo Gonçalves2024-10-171-0/+2
| | | | | | | | | | | Add Toradex Verdin Ivy carrier board support. https://www.toradex.com/products/carrier-board/ivy-carrier-board Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: freescale: Add verdin imx8mm ivy boardJoão Paulo Gonçalves2024-10-171-0/+2
| | | | | | | | | | | Add Toradex Verdin Ivy carrier board support. https://www.toradex.com/products/carrier-board/ivy-carrier-board Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Document the Comvetia LXR boardFabio Estevam2024-10-161-1/+3
| | | | | | | | | | | The Comvetia LXR board is based on a i.MX6Q phyFLEX-i.MX6 Quad SoM from Phytec. Add an entry for this board. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boardsFrieder Schrempf2024-10-161-0/+13
| | | | | | | | | | Add the bindings for the Kontron i.MX8MP OSM-S SoM and carrier boards. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add Variscite Symphony board and VAR-SOM-MX8MP SoMTarang Raval2024-09-031-0/+6
| | | | | | | | | Adds support for the Variscite VAR-SOM-MX8MP System on Module and the Variscite Symphony Evaluation Kit. Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: drop usage of VAR-SOM-MX8MM SoM compatible aloneKrzysztof Kozlowski2024-09-031-1/+0
| | | | | | | | | The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone without motherboard, so drop the usage of its compatible alone. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: rename gw7905 to gw75xxTim Harvey2024-09-021-2/+2
| | | | | | | | | | | | | | | | The GW7905 was renamed to GW7500 before production release. While we typically do not change compatibles, the GW7905 was never released before its product name was changed to a GW7500. The use the the 'xx' wildcard is to denote the fact that this device-tree can support range of board models from GW7500 to GW7599 as has been done historically with the Gateworks baseboards to support various build customizatoins based on the same PCB. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add Kontron i.MX93 OSM-S based boardsFrieder Schrempf2024-08-311-0/+6
| | | | | | | | | Add the bindings for the Kontron i.MX93 OSM-S SoM and BL carrier board. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: correct spelling of TQ-SystemsMax Merchel2024-08-311-7/+7
| | | | | | | | | | | TQ-Systems is written with a hyphen. The incorrect spelling with spaces is therefore corrected. While at it, comments are added to TQMa6ULLx. Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add fsl-ls2081a-rdb boardFrank Li2024-08-311-0/+6
| | | | | | | | | | | | Add compatible string fsl-ls2081a-rdb for ls2081a rdb boards to fix below warning: arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dtb: /: failed to match any schema with compatible: ['fsl,ls2081a-rdb', 'fsl,ls2081a'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add i.MX93 14x14 EVK boardPeng Fan2024-08-051-0/+1
| | | | | | | | Add compatible string for i.MX93 14x14 EVK Board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boardsMichael Walle2024-06-271-0/+12
| | | | | | | | | | The Kontron SMARC-sAMX6i is just a module. There was no device tree for an actual board for now. Document the binding to use the module on the evaluation carrier. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: add MBa8MP-RAS314 SBCAlexander Stein2024-06-271-2/+3
| | | | | | | | | | | | MBa8MP-RAS314 is an SBC based on the embedded module TQMa8MPxL. All relevant interfaces integrated in the CPU have been implemented on the MBa8MP-RAS314 for (an) industrial usage. Due to the numerous interfaces and the small size of this SBC the use in different applications is possible without the need of a [special,custom] design. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add i.MX93 9x9 QSB boardPeng Fan2024-06-171-0/+1
| | | | | | | | Add compatible string for i.MX93 9x9 Quick Start Board. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add i.MX95 19x19 EVK boardPeng Fan2024-06-171-0/+6
| | | | | | | | Add DT compatible string for NXP i.MX95 19x19 EVK board. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Document Compulab IOT-GATE-iMX8Fabio Estevam2024-06-171-0/+7
| | | | | | | | | | | | | | | Document Compulab's IOT-GATE-iMX8 board, which is based on Compulab's UCM-iMX8M-Mini SoM. Board URL: https://www.compulab.com/products/iot-gateways/iot-gate-imx8-industrial-arm-iot-gateway/ SoM URL: https://www.compulab.com/products/computer-on-modules/ucm-imx8m-mini-nxp-i-mx-8m-mini-som-system-on-module-computer/ Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: Drop Li Yang as maintainer for all bindingsMichael Walle2024-06-161-1/+0
| | | | | | | | | | | | | Remove Li Yang from all device tree bindings because mails to this address are bouncing. Commit fbdd90334a62 ("MAINTAINERS: Drop Li Yang as their email address stopped working") already removed the entry from the MAINTAINERS but didn't address all the in-file entries of the device tree bindings. Signed-off-by: Michael Walle <mwalle@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add Colibri iMX8DXHiago De Franco2024-04-221-2/+4
| | | | | | | | | | Add support for Toradex Colibri iMX8DX SoM. As the i.MX8QXP variant is already supported, update the description with i.MX8DX and add 'fsl,imx8dx' item as well. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: remove reduntant toradex,colibri-imx8xHiago De Franco2024-04-221-1/+0
| | | | | | | | | | 'toradex,colibri-imx8x' is already present as a constant value for 'i.MX8QP Board with Toradex Colibri iMX8X Modules', so there is no need to keep it twice as a enum value for 'i.MX8QXP based Boards'. Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: Add Emcraft Systems i.MX8M Plus NavQ+ KitGilles Talis2024-04-031-0/+1
| | | | | | | | | Add DT compatible string for Emcraft NavQ+ kit based on the i.MX8M Plus SoC from NXP Signed-off-by: Gilles Talis <gilles.talis@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add NXP S32G3 boardWadim Mueller2024-04-021-0/+6
| | | | | | | | | | | Add bindings for NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) [1] [1] https://www.nxp.com/design/design-center/designs/s32g3-vehicle-networking-reference-design:S32G-VNP-RDB3 Signed-off-by: Wadim Mueller <wafgo01@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add Seeed studio NPi based boardsParthiban Nallathambi2024-03-291-0/+8
| | | | | | | | | | NPi i.MX6ULL eMMC/NAND is Seed Studios SoM using i.MX6ULL. Development baords can be either based on NAND or eMMC SoM. Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: add UNI-T UTi260BSebastian Reichel2024-02-251-0/+1
| | | | | | | | Add compatible value for i.MX6ULL based UNI-T UTi260B thermal camera. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: remove redundant company nameHugo Villeneuve2024-02-061-1/+1
| | | | | | | | | | | | | Company name in compatible description appears twice, which is not really helpful, so remove it from product name. The board is a prototype developed by my company and we are still at the prototype stage, so there is zero ABI impact. Fixes: bb405e8b5336 ("dt-bindings: arm: fsl: add RVE gateway board") Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add imx8qm apalis eval v1.2 carrier boardJoao Paulo Goncalves2024-02-061-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the toradex,apalis-imx8-eval-v1.2 and toradex,apalis-imx8-v1.1-eval-v1.2 compatible strings for version 1.2 of the Apalis Evaluation Board. Version v1.2 includes the following changes compared to v1.1: - 8-bit MMC connector replaced with a 4-bit uSD connector. - Audio codec NAU88C22 added. - M24C02 EEPROM i2c added. - MIPI-CSI-2 connector directly to the board added. - PCIe switch PEX8605 removed and PCIe now is routed directly to Mini PCIe connector. - Power measurement IC INA219 added. - Replaced DVI with HDMI connector. - Single-channel USB to UART converter replaced with four-channel USB to UART/JTAG. - Temperature sensor TMP75 added. Please note that board version v1.0 (which reached EOL) is compatible with v1.1, therefore toradex,apalis-imx8-eval and toradex,apalis-v1.1-imx8-eval compatible strings should be used for both v1.0 and v1.1. Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add toradex,apalis_imx6q-eval-v1.2 boardHiago De Franco2024-02-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add the toradex,apalis_imx6q-eval-v1.2 compatible string for version 1.2 of the Apalis Evaluation Board. Version v1.2 includes the following changes compared to v1.1: - 8-bit MMC connector replaced with a 4-bit uSD connector. - Audio codec NAU88C22 added. - M24C02 EEPROM i2c added. - MIPI-CSI-2 connector directly to the board added. - PCIe switch PEX8605 removed and PCIe now is routed directly to Mini PCIe connector. - Power measurement IC INA219 added. - Replaced DVI with HDMI connector. - Single-channel USB to UART converter replaced with four-channel USB to UART/JTAG. - Temperature sensor TMP75 added. Please note that version v1.0 (which reached EOL) is compatible with v1.1, therefore toradex,apalis_imx6q-eval compatible string should be used for both v1.0 and v1.1. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add phyBOARD-Segin-i.MX93Mathieu Othacehe2024-02-061-0/+6
| | | | | | | | | Add support for phyBOARD-Segin-i.MX93 board. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Reviewed-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add Sielaff i.MX6 Solo boardFrieder Schrempf2024-02-051-0/+1
| | | | | | | | Add compatible for the Sielaff i.MX6 Solo board. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add VAR-SOM-MX93 with SymphonyMathieu Othacehe2024-02-051-0/+6
| | | | | | | | Add support for Variscite i.MX93 VAR-SOM-MX93 SoM with Symphony board. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: add TQMa8Xx boardsAlexander Stein2024-02-011-0/+16
| | | | | | | | | | | | TQMa8Xx is a SOM series featuring NXP i.MX8X SoC. They are called TQMa8XQP and TQMa8XDP respectively. MBa8Xx is an evaluation mainboard for this SOM Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add Dimonoff gateway EVK boardHugo Villeneuve2023-12-141-0/+1
| | | | | | | | | Add DT compatible string for Dimonoff gateway EVK board based on a Variscite VAR-SOM-NANO with a NXP MX8MN nano CPU. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boardsGregor Herburger2023-12-131-0/+10
| | | | | | | | | | TQMLX2160A is a TQ-Systems GmbH SoM using the LX2160A SoC. MBLX2160a is the starterkit baseboard for TQMLX2160A. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add verdin imx8mp mallow boardJoao Paulo Goncalves2023-12-061-0/+2
| | | | | | | | | | | | | | Add Mallow carrier board for wifi and nonwifi variants of Toradex Verdin IMX8MP SoM. Mallow is a low-cost carrier board in the Verdin family with a small form factor and build for volume production making it ideal for industrial and embedded applications. https://www.toradex.com/products/carrier-board/mallow-carrier-board Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add verdin imx8mm mallow boardJoao Paulo Goncalves2023-12-061-0/+2
| | | | | | | | | | | | | | Add Mallow carrier board for wifi and nonwifi variants of Toradex Verdin IMX8MM SoM. Mallow is a low-cost carrier board in the Verdin family with a small form factor and build for volume production making it ideal for industrial and embedded applications. https://www.toradex.com/products/carrier-board/mallow-carrier-board Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: Add compatible for SKOV i.MX8MP RevB boardOleksij Rempel2023-12-061-0/+3
| | | | | | | | Add DT compatible string for a SKOV i.MX8MP RevB climate controller board. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add RVE gateway boardHugo Villeneuve2023-12-061-1/+3
| | | | | | | | | Add DT compatible string for RVE gateway board based on a Variscite VAR-SOM-NANO with a NXP MX8MN nano CPU. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add TQ-Systems LS1088 based boardsGregor Herburger2023-10-101-0/+7
| | | | | | | | | TQMLS1088a uses a common board layout with TQMLS1043A/TQMLS1046A. MBLS10XXA is a starterkit baseboard usable for these SOMs. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add TQ-Systems LS1043A/LS1046A based boardsGregor Herburger2023-10-101-0/+14
| | | | | | | | | | TQMLS1043A and TQMLS1046A use the LS1043A LS1046A SOC on a common layout. MBLS10XXA is a starterkit baseboard usable for both SOMs. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog BoardJosua Mayer2023-10-101-1/+8
| | | | | | | | | | | | | | | | | | | | | | | SolidRun now have 2 product lines around NXP Layerscape SoC: - LX2160A COM Express 7 - LX2162A System on Module LX2162 is a smaller package and reduced feature set to LX2160A; LX2162 SoM is also a smaller form factor and reduced feature set to CEX. Since both product lines are physically incompatible, the existing group "SolidRun LX2160A based Boards" has been renamed to include "CEX" in its name, meaning products based on LX2160A COM Express Module, following this pattern: "solidrun,<board>", "solidrun,lx2160a-cex", "fsl,lx2160a" Add DT compatible for both SolidRun LX2162A SoM, and LX2162 Clearfog boards to a new group based on LX2162A SoM, following this pattern: "solidrun,<board>", "solidrun,lx2162a-som", "fsl,lx2160a" Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: add phyGATE-Tauri-L boardYannic Moog2023-10-091-1/+3
| | | | | | | | | Add dt compatible for the phyGATE-Tauri-L board. It uses the phyCORE-i.MX8MM SoM Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Yannic Moog <y.moog@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Document the missing imx23 boardsFabio Estevam2023-09-251-0/+3
| | | | | | | | | | There are some imx23 based boards that are not documented. Add them to the list of supportted i.MX23 boards. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* dt-bindings: arm: fsl: Add VAR-SOM-MX6 SoM with Custom BoardJames Hilliard2023-09-251-0/+6
| | | | | | | | | | Add support for Variscite i.MX6Q VAR-SOM-MX6 SoM with Custom Board. Cc: Pierluigi Passaro <pierluigi.p@variscite.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* Merge tag 'devicetree-for-6.6' of ↵Linus Torvalds2023-08-311-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT core: - Add support for generating DT nodes for PCI devices. This is the groundwork for applying overlays to PCI devices containing non-discoverable downstream devices. - DT unittest additions to check reverted changesets, to test for refcount issues, and to test unresolved symbols. Also, various clean-ups of the unittest along the way. - Refactor node and property manipulation functions to better share code with old API and changeset API - Refactor changeset print functions to a common implementation - Move some platform_device specific functions into of_platform.c Bindings: - Treewide fixing of typos - Treewide clean-up of SPDX tags to use 'OR' consistently - Last chunk of dropping unnecessary quotes. With that, the check for unnecessary quotes is enabled in yamllint. - Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi bindings to DT schema format - Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings - Fixes for Rockchip DWC PCI binding - Ensure all properties are evaluated on USB connector schema - Fix dt-check-compatible script to find of_device_id instances with compiler annotations" * tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits) dt-bindings: usb: Add V3s compatible string for OHCI dt-bindings: usb: Add V3s compatible string for EHCI dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B dt-bindings: vendor-prefixes: document Saef Technology dt-bindings: thermal: lmh: update maintainer address of: unittest: Fix of_unittest_pci_node() kconfig dependencies dt-bindings: crypto: ice: Document sm8450 inline crypto engine dt-bindings: ufs: qcom: Add ICE to sm8450 example dt-bindings: ufs: qcom: Add sm6115 binding dt-bindings: ufs: qcom: Add reg-names property for ICE dt-bindings: yamllint: Enable quoted string check dt-bindings: Drop remaining unneeded quotes of: unittest-data: Fix whitespace - angular brackets of: unittest-data: Fix whitespace - indentation of: unittest-data: Fix whitespace - blank lines of: unittest-data: Convert remaining overlay DTS files to sugar syntax of: overlay: unittest: Add test for unresolved symbol of: unittest: Add separators to of_unittest_overlay_high_level() of: unittest: Cleanup partially-applied overlays of: unittest: Merge of_unittest_apply{,_revert}_overlay_check() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 08:54:35 +0100