| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
All X-Powers PMICs described by this binding have an IRQ pin, and so
far (almost) all boards connected this to some NMI pin or GPIO on the SoC
they are connected to.
However we start to see boards that omit this connection, and technically
the IRQ pin is not essential to the basic PMIC operation.
The existing Linux driver allows skipping the IRQ pin setup for two chips
already, so update the binding to also make the DT property optional for
the missing chip. And while we are at it, add the AXP313a to that list,
as they are actually boards out there not connecting the IRQ pin.
This allows to have DTs correctly describing those boards not wiring up
the interrupt.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230919103913.463156-2-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
| |
|
|
|
|
|
|
|
|
|
| |
The AXP192 PMIC is similar to the AXP202/AXP209, but with different
regulators, additional GPIOs, and a different IRQ register layout,
so it needs a new compatible string.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230511092609.76183-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The X-Powers AXP15060 is a PMIC seen on Starfive Visionfive 2 board. Add
relative compatible item and CPUSLDO support and disables DC-DC
frequency setting for it.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/TY3P286MB261177CF7AA2959BD9517DA998609@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The X-Powers AXP313a is a PMIC used on some devices with the Allwinner
H616 or H313 SoC.
According to the datasheet, the DC/DC converter PWM frequency is fixed
(to 3 MHz), so disallow the property that lets us set this frequency
for the other PMICs.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230401001850.4988-2-andre.przywara@arm.com
(cherry picked from commit 2a9e8a1a7c4caadf690e5a77fe4162c5edab4a9c)
Signed-off-by: Lee Jones <lee@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The syntax to disallow x-powers,drive-vbus-en,
x-powers,self-working-mode and x-powers,master-mode for certain variants
can be made simpler. Also this produces much nicer warning message when
the condition hits wrong DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230325114353.50293-1-krzysztof.kozlowski@linaro.org
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Fix node refcounting in of_find_last_cache_level()
- Constify device_node in of_device_compatible_match()
- Fix 'dma-ranges' handling in bus controller nodes
- Fix handling of initrd start > end
- Improve error reporting in of_irq_init()
- Taint kernel on DT unittest running
- Use strscpy instead of strlcpy
- Add a build target, dt_compatible_check, to check for compatible
strings used in kernel sources against compatible strings in DT
schemas.
- Handle DT_SCHEMA_FILES changes when rebuilding
DT bindings:
- LED bindings for MT6370 PMIC
- Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller,
mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc,
and arm,versatile-sysreg to DT schema format
- Add nvmem cells to u-boot,env schema
- Add more LED_COLOR_ID definitions
- Require 'opp-table' uses to be a node
- Various schema fixes to match QEMU 'virt' DT usage
- Tree wide dropping of redundant 'Device Tree Binding' in schema
titles
- More (unevaluated|additional)Properties fixes in schema child nodes
- Drop various redundant minItems equal to maxItems"
* tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits)
of: base: Shift refcount decrement in of_find_last_cache_level()
dt-bindings: leds: Add MediaTek MT6370 flashlight
dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator
dt-bindings: mailbox: Convert mtk-gce to DT schema
of: base: make of_device_compatible_match() accept const device node
of: Fix "dma-ranges" handling for bus controllers
of: fdt: Remove unused struct fdt_scan_status
dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node
dt-bindings: timer: Add power-domains for TI timer-dm on K3
dt: Add a check for undocumented compatible strings in kernel
kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs
dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML
dt-bindings: i2c: migrate mt7621 text bindings to YAML
dt-bindings: power: gpcv2: correct patternProperties
dt-bindings: virtio: Convert virtio,pci-iommu to DT schema
dt-bindings: timer: arm,arch_timer: Allow dual compatible string
dt-bindings: arm: cpus: Add kryo240 compatible
dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema
dt-bindings: nvmem: u-boot,env: add basic NVMEM cells
dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema
...
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
As indicated in
link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/
DT schema files should not have 'Device Tree Binding' as part of there
title: line. Remove this in most .yaml files, so hopefully preventing
developers copying it into new .yaml files, and being asked to remove
it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch
Signed-off-by: Rob Herring <robh@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220823145649.3118479-4-robh@kernel.org
|
| |/
|
|
|
|
|
|
|
|
|
|
| |
AXP228 is a PMIC used on boards such as the Clockwork ClockworkPi and
DevTerm. Its register map appears to be identical to the AXP221 variant.
The only known difference is in the default values for regulator on/off
states and voltages.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20220810013430.27061-1-samuel@sholland.org
|
|
|
The X-Powers AXP PMICs are supported by Linux thanks to its device tree
binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210924071614.868307-2-maxime@cerno.tech
|
