| Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
The same code exists a few lines above.
Fixes: 436b2ac603d5 ("modpost: invoke modpost only when input files are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This function returns the first child object, but the returned pointer
is not compatible with (ConfigItem *).
Commit cc1c08edccaf ("kconfig: qconf: don't show goback button on
splitMode") uncovered this issue because using the pointer from this
function would make qconf crash. (https://lkml.org/lkml/2020/7/18/411)
This function does not work. Remove.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When vxlan interface is deleted, all fdbs are deleted by vxlan_flush().
vxlan_flush() flushes fdbs but it doesn't delete fdb, which contains
all-zeros-mac because it is deleted by vxlan_uninit().
But vxlan_uninit() deletes only the fdb, which contains both all-zeros-mac
and default vni.
So, the fdb, which contains both all-zeros-mac and non-default vni
will not be deleted.
Test commands:
ip link add vxlan0 type vxlan dstport 4789 external
ip link set vxlan0 up
bridge fdb add to 00:00:00:00:00:00 dst 172.0.0.1 dev vxlan0 via lo \
src_vni 10000 self permanent
ip link del vxlan0
kmemleak reports as follows:
unreferenced object 0xffff9486b25ced88 (size 96):
comm "bridge", pid 2151, jiffies 4294701712 (age 35506.901s)
hex dump (first 32 bytes):
02 00 00 00 ac 00 00 01 40 00 09 b1 86 94 ff ff ........@.......
46 02 00 00 00 00 00 00 a7 03 00 00 12 b5 6a 6b F.............jk
backtrace:
[<00000000c10cf651>] vxlan_fdb_append.part.51+0x3c/0xf0 [vxlan]
[<000000006b31a8d9>] vxlan_fdb_create+0x184/0x1a0 [vxlan]
[<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan]
[<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan]
[<0000000056633c2c>] rtnl_fdb_add+0x187/0x270
[<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490
[<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110
[<00000000dff433e7>] netlink_unicast+0x18e/0x250
[<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400
[<000000002ed55153>] ____sys_sendmsg+0x237/0x260
[<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0
[<000000006c3982f1>] __sys_sendmsg+0x4e/0x80
[<00000000a8f875d2>] do_syscall_64+0x56/0xe0
[<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff9486b1c40080 (size 128):
comm "bridge", pid 2157, jiffies 4294701754 (age 35506.866s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 f8 dc 42 b2 86 94 ff ff ..........B.....
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace:
[<00000000a2981b60>] vxlan_fdb_create+0x67/0x1a0 [vxlan]
[<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan]
[<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan]
[<0000000056633c2c>] rtnl_fdb_add+0x187/0x270
[<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490
[<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110
[<00000000dff433e7>] netlink_unicast+0x18e/0x250
[<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400
[<000000002ed55153>] ____sys_sendmsg+0x237/0x260
[<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0
[<000000006c3982f1>] __sys_sendmsg+0x4e/0x80
[<00000000a8f875d2>] do_syscall_64+0x56/0xe0
[<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 3ad7a4b141eb ("vxlan: support fdb and learning in COLLECT_METADATA mode")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit cc1c08edccaf5317d99a17a3231fe06381044e83.
Maxim Levitsky reports 'make xconfig' crashes since that commit
(https://lkml.org/lkml/2020/7/18/411)
Or, the following is simple test code that makes it crash:
menu "Menu"
config FOO
bool "foo"
default y
menuconfig BAR
bool "bar"
depends on FOO
endmenu
Select the Split View mode, and double-click "bar" in the right
window, then you will see Segmentation fault.
When 'last' is not set for symbolMode, the following code in
ConfigList::updateList() calls firstChild().
item = last ? last->nextSibling() : firstChild();
However, the pointer returned by ConfigList::firstChild() does not
seem to be compatible with (ConfigItem *), which seems another bug.
I'd rather want to reconsider whether hiding the goback icon is the
right thing to do.
In the following test code, the Split View shows "Menu2" and "Menu3"
in the right window. You can descend into "Menu3", but there is no way
to ascend back to "Menu2" from "Menu3".
menu "Menu1"
config FOO
bool "foo"
default y
menu "Menu2"
depends on FOO
menu "Menu3"
config BAZ
bool "baz"
endmenu
endmenu
endmenu
It is true that the goback button is currently not functional due to
yet another bug, but hiding the problem is not the right way to go.
Anyway, Segmentation fault is fatal. Revert the offending commit for
now, and we should find the right solution.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This reverts commit 5752ff07fd90d764d96e3c586cc95c09598abfdd.
It added dead code to ConfigList:ConfigList().
The constructor of ConfigList has the initializer, mode(singleMode).
if (mode == symbolMode)
setHeaderLabels(QStringList() << "Item" << "Name" << "N" << "M" << "Y" << "Value");
else
setHeaderLabels(QStringList() << "Option" << "Name" << "N" << "M" << "Y" << "Value");
... always takes the else part.
The change to ConfigList::updateSelection() is strange too.
When you click the split view icon for the first time, the titles in
both windows show "Option". After you click something in the right
window, the title suddenly changes to "Item".
ConfigList::updateSelection() is not the right place to do this,
at least. It was not a good idea, I think.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Every time the goback icon is clicked, the annoying message "goBack"
is displayed on the console.
I guess this line is the left-over debug code of commit af737b4defe1
("kconfig: qconf: simplify the goBack() logic").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
cppcheck reports "Mismatching allocation and deallocation".
$ cppcheck scripts/kconfig/qconf.cc
Checking scripts/kconfig/qconf.cc ...
scripts/kconfig/qconf.cc:1242:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc]
delete data;
^
scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data
char *data = new char[count + 1];
^
scripts/kconfig/qconf.cc:1242:10: note: Mismatching allocation and deallocation: data
delete data;
^
scripts/kconfig/qconf.cc:1255:10: error: Mismatching allocation and deallocation: data [mismatchAllocDealloc]
delete data;
^
scripts/kconfig/qconf.cc:1236:15: note: Mismatching allocation and deallocation: data
char *data = new char[count + 1];
^
scripts/kconfig/qconf.cc:1255:10: note: Mismatching allocation and deallocation: data
delete data;
^
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, qconf.moc is included from qconf.cc but they can be compiled
independently.
When you modify qconf.cc, qconf.moc does not need recompiling.
Rename qconf.moc to qconf-moc.cc, and split it out as an independent
compilation unit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Regenerate qconf.moc when the moc command is changed.
This also allows 'make mrproper' to clean it up. Previously, it was
not cleaned up because 'clean-files += qconf.moc' was missing.
Now 'make mrproper' correctly cleans it up because files listed in
'targets' are cleaned.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
rds_notify_queue_get() is potentially copying uninitialized kernel stack
memory to userspace since the compiler may leave a 4-byte hole at the end
of `cmsg`.
In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which
unfortunately does not always initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org
Fixes: f037590fff30 ("rds: fix a leak of kernel memory")
Fixes: bdbe6fbc6a2f ("RDS: recv.c")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Exchange the positions of the err_tbl_init and err_register labels in
ct_init_module function.
Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone")
Signed-off-by: liujian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In binutils 2.35, 'nm -D' changed to show symbol versions along with
symbol names, with the usual @@ separator. When generating
libtraceevent-dynamic-list we need just the names, so strip off the
version suffix if present.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When recording with cache-misses and arm_spe_x event, I found that it
will just fail without showing any error info if i put cache-misses
after 'arm_spe_x' event.
[root@localhost 0620]# perf record -e cache-misses \
-e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.067 MB perf.data ]
[root@localhost 0620]#
[root@localhost 0620]# perf record -e arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/ \
-e cache-misses sleep 1
[root@localhost 0620]#
The current code can only work if the only event to be traced is an
'arm_spe_x', or if it is the last event to be specified. Otherwise the
last event type will be checked against all the arm_spe_pmus[i]->types,
none will match and an out of bound 'i' index will be used in
arm_spe_recording_init().
We don't support concurrent multiple arm_spe_x events currently, that
is checked in arm_spe_recording_options(), and it will show the relevant
info. So add the check and record of the first found 'arm_spe_pmu' to
fix this issue here.
Fixes: ffd3d18c20b8 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support")
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200724071111.35593-2-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit 5aa98879efe7 ("s390/cpum_sf: prohibit callchain data collection")
prohibits call graph sampling for hardware events on s390. The
information recorded is out of context and does not match.
On s390 this commit now breaks test case 68 Zstd perf.data
compression/decompression.
Therefore omit call graph sampling on s390 in this test.
Output before:
[root@t35lp46 perf]# ./perf test -Fv 68
68: Zstd perf.data compression/decompression :
--- start ---
Collecting compressed record file:
Error:
cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
Try 'perf stat'
---- end ----
Zstd perf.data compression/decompression: FAILED!
[root@t35lp46 perf]#
Output after:
[root@t35lp46 perf]# ./perf test -Fv 68
68: Zstd perf.data compression/decompression :
--- start ---
Collecting compressed record file:
500+0 records in
500+0 records out
256000 bytes (256 kB, 250 KiB) copied, 0.00615638 s, 41.6 MB/s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.004 MB /tmp/perf.data.X3M,
compressed (original 0.002 MB, ratio is 3.609) ]
Checking compressed events stats:
# compressed : Zstd, level = 1, ratio = 4
COMPRESSED events: 1
2ELIFREPh---- end ----
Zstd perf.data compression/decompression: Ok
[root@t35lp46 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200729135314.91281-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:
Direct leak of 28 byte(s) in 4 object(s) allocated from:
#0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.
Free the token variable before calling read_token in order to plug the
leak.
Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'Commit 8566ac8b8e7c ("KVM: SVM: Implement pause loop exit logic in SVM")'
drops disable pause loop exit/pause filtering capability completely, I
guess it is a merge fault by Radim since disable vmexits capabilities and
pause loop exit for SVM patchsets are merged at the same time. This patch
reintroduces the disable pause loop exit/pause filtering capability support.
Reported-by: Haiwei Li <lihaiwei@tencent.com>
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Fixes: 8566ac8b ("KVM: SVM: Implement pause loop exit logic in SVM")
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-3-git-send-email-wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Prevent setting the tscdeadline timer if the lapic is hw disabled.
Fixes: bce87cce88 (KVM: x86: consolidate different ways to test for in-kernel LAPIC)
Cc: <stable@vger.kernel.org>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Accept the DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()
family of modifiers to handle broken userspace
Xorg modesetting and Mesa drivers. Existing Mesa
drivers are still aware of only these older
format modifiers which do not differentiate
between different variations of the block linear
layout. When the format modifier support flag was
flipped in the nouveau kernel driver, the X.org
modesetting driver began attempting to use its
format modifier-enabled framebuffer path. Because
the set of format modifiers advertised by the
kernel prior to this change do not intersect with
the set of format modifiers advertised by Mesa,
allocating GBM buffers using format modifiers
fails and the modesetting driver falls back to
non-modifier allocation. However, it still later
queries the modifier of the GBM buffer when
creating its DRM-KMS framebuffer object, receives
the old-format modifier from Mesa, and attempts
to create a framebuffer with it. Since the kernel
is still not aware of these formats, this fails.
Userspace should not be attempting to query format
modifiers of GBM buffers allocated with a non-
format-modifier-aware allocation path, but to
avoid breaking existing userspace behavior, this
change accepts the old-style format modifiers when
creating framebuffers and applying them to planes
by translating them to the equivalent new-style
modifier. To accomplish this, some layout
parameters must be assumed to match properties of
the device targeted by the relevant ioctls. To
avoid perpetuating misuse of the old-style
modifiers, this change does not advertise support
for them. Doing so would imply compatibility
between devices with incompatible memory layouts.
Tested with Xorg 1.20 modesetting driver,
weston@c46c70dac84a4b3030cd05b380f9f410536690fc,
gnome & KDE wayland desktops from Ubuntu 18.04,
and sway 1.5
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Fixes: fa4f4c213f5f ("drm/nouveau/kms: Support NVIDIA format modifiers")
Link: https://lkml.org/lkml/2020/6/30/1251
Signed-off-by: James Jones <jajones@nvidia.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The function invokes bpf_prog_inc(), which increases the reference
count of a bpf_prog object "rq->xdp_prog" if the object isn't NULL.
The refcount leak issues take place in two error handling paths. When
either mlx5_wq_ll_create() or mlx5_wq_cyc_create() fails, the function
simply returns the error code and forgets to drop the reference count
increased earlier, causing a reference count leak of "rq->xdp_prog".
Fix this issue by jumping to the error handling path err_rq_wq_destroy
while either function fails.
Fixes: 422d4c401edd ("net/mlx5e: RX, Split WQ objects for different RQ types")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The flow_source must be specified, even for rule without matching
source vport, because some actions are only allowed in uplink.
Otherwise, rule can't be offloaded and firmware syndrome happens.
Fixes: 6fb0701a9cfa ("net/mlx5: E-Switch, Add support for offloading rules with no in_port")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The modified flow_context fields in FTE must be indicated in
modify_enable bitmask. Previously, the misc bit in modify_enable is
always set as source vport must be set for each rule. So, when parsing
vxlan/gre/geneve/qinq rules, this bit is not set because those are all
from the same misc fileds that source vport fields are located at, and
we don't need to set the indicator twice.
After adding per vport tables for mirroring, misc bit is not set, then
firmware syndrome happens. To fix it, set the bit wherever misc fileds
are changed. This also makes it unnecessary to check misc fields and set
the misc bit accordingly in metadata matching, so here remove it.
Besides, flow_source must be specified for uplink because firmware
will check it and some actions are only allowed for packets received
from uplink.
Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently the driver restores only IPv4 tunnel headers.
Add support for restoring IPv6 tunnel header.
Fixes: b8ce90370977 ("net/mlx5e: Restore tunnel metadata on miss")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
gemini_ethernet_port_probe()
Fix the missing clk_disable_unprepare() before return
from gemini_ethernet_port_probe() in the error handling case.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On an error return, jump to the unlock at the end to be sure
to unlock the queue_lock mutex.
Fixes: 0925e9db4dc8 ("ionic: use mutex to protect queue operations")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
atmtcp_remove_persistent() invokes atm_dev_lookup(), which returns a
reference of atm_dev with increased refcount or NULL if fails.
The refcount leaks issues occur in two error handling paths. If
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL, the function
returns 0 without decreasing the refcount kept by a local variable,
resulting in refcount leaks.
Fix the issue by adding atm_dev_put() before returning 0 both when
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL.
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in recent kernel versions there are warnings about incorrect MTU size
like these:
eth0: mtu greater than device maximum
mtk_soc_eth 1b100000.ethernet eth0: error -22 setting MTU to include DSA overhead
Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Fixes: 72579e14a1d3 ("net: dsa: don't fail to probe if we couldn't set the MTU")
Fixes: 7a4c53bee332 ("net: report invalid mtu value via netlink extack")
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If some processes in nixge_probe() fail, free_netdev(dev)
needs to be called to aviod a memory leak.
Fixes: 87ab207981ec ("net: nixge: Separate ctrl and dma resources")
Fixes: abcd3d6fc640 ("net: nixge: Fix error path for obtaining mac address")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Number of .dumpit functions try to ignore -EOPNOTSUPP errors.
Recent change missed that, and started reporting all errors
but -EMSGSIZE back from dumps. This leads to situation like
this:
$ devlink dev info
devlink answers: Operation not supported
Dump should not report an error just because the last device
to be queried could not provide an answer.
To fix this and avoid similar confusion make sure we clear
err properly, and not leave it set to an error if we don't
terminate the iteration.
Fixes: c62c2cfb801b ("net: devlink: don't ignore errors during dumpit")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's a race between rxrpc_sendmsg setting up a call, but then failing to
send anything on it due to an error, and recvmsg() seeing the call
completion occur and trying to return the state to the user.
An assertion fails in rxrpc_recvmsg() because the call has already been
released from the socket and is about to be released again as recvmsg deals
with it. (The recvmsg_q queue on the socket holds a ref, so there's no
problem with use-after-free.)
We also have to be careful not to end up reporting an error twice, in such
a way that both returns indicate to userspace that the user ID supplied
with the call is no longer in use - which could cause the client to
malfunction if it recycles the user ID fast enough.
Fix this by the following means:
(1) When sendmsg() creates a call after the point that the call has been
successfully added to the socket, don't return any errors through
sendmsg(), but rather complete the call and let recvmsg() retrieve
them. Make sendmsg() return 0 at this point. Further calls to
sendmsg() for that call will fail with ESHUTDOWN.
Note that at this point, we haven't send any packets yet, so the
server doesn't yet know about the call.
(2) If sendmsg() returns an error when it was expected to create a new
call, it means that the user ID wasn't used.
(3) Mark the call disconnected before marking it completed to prevent an
oops in rxrpc_release_call().
(4) recvmsg() will then retrieve the error and set MSG_EOR to indicate
that the user ID is no longer known by the kernel.
An oops like the following is produced:
kernel BUG at net/rxrpc/recvmsg.c:605!
...
RIP: 0010:rxrpc_recvmsg+0x256/0x5ae
...
Call Trace:
? __init_waitqueue_head+0x2f/0x2f
____sys_recvmsg+0x8a/0x148
? import_iovec+0x69/0x9c
? copy_msghdr_from_user+0x5c/0x86
___sys_recvmsg+0x72/0xaa
? __fget_files+0x22/0x57
? __fget_light+0x46/0x51
? fdget+0x9/0x1b
do_recvmmsg+0x15e/0x232
? _raw_spin_unlock+0xa/0xb
? vtime_delta+0xf/0x25
__x64_sys_recvmmsg+0x2c/0x2f
do_syscall_64+0x4c/0x78
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 357f5ef64628 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()")
Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to replace Thor Thayer as Altera Triple Speed Ethernet
maintainer as he is moving to a different role.
Signed-off-by: Joyce Ooi <joyce.ooi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When read netdevsim trap_flow_action_cookie, we need to init it first,
or we will get "Invalid argument" error.
Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.
This bug can be easily reproduced with the following C program:
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
int main()
{
int s, value;
struct sockaddr_in6 addr;
struct ipv6_mreq m6;
s = socket(AF_INET6, SOCK_DGRAM, 0);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(5000);
inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
connect(s, (struct sockaddr *)&addr, sizeof(addr));
inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
m6.ipv6mr_interface = 5;
setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));
value = AF_INET;
setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));
close(s);
return 0;
}
Reported-by: ch3332xr@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__bpfilter_process_sockopt never initialized the pos variable passed
to the pipe write. This has been mostly harmless in the past as pipes
ignore the offset, but the switch to kernel_write now verified the
position, which can lead to a failure depending on the exact stack
initialization pattern. Initialize the variable to zero to make
rw_verify_area happy.
Fixes: 6955a76fbcd5 ("bpfilter: switch to kernel_write")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: Rodrigo Madera <rodrigo.madera@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Rodrigo Madera <rodrigo.madera@gmail.com>
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/bpf/20200730160900.187157-1-hch@lst.de
|
|
Fix kernel oops observed when an ext adv data is larger than 31 bytes.
This can be reproduced by setting up an advertiser with advertisement
larger than 31 bytes. The issue is not sensitive to the advertisement
content. In particular, this was reproduced with an advertisement of
229 bytes filled with 'A'. See stack trace below.
This is fixed by not catching ext_adv as legacy adv are only cached to
be able to concatenate a scanable adv with its scan response before
sending it up through mgmt.
With ext_adv, this is no longer necessary.
general protection fault: 0000 [#1] SMP PTI
CPU: 6 PID: 205 Comm: kworker/u17:0 Not tainted 5.4.0-37-generic #41-Ubuntu
Hardware name: Dell Inc. XPS 15 7590/0CF6RR, BIOS 1.7.0 05/11/2020
Workqueue: hci0 hci_rx_work [bluetooth]
RIP: 0010:hci_bdaddr_list_lookup+0x1e/0x40 [bluetooth]
Code: ff ff e9 26 ff ff ff 0f 1f 44 00 00 0f 1f 44 00 00 55 48 8b 07 48 89 e5 48 39 c7 75 0a eb 24 48 8b 00 48 39 f8 74 1c 44 8b 06 <44> 39 40 10 75 ef 44 0f b7 4e 04 66 44 39 48 14 75 e3 38 50 16 75
RSP: 0018:ffffbc6a40493c70 EFLAGS: 00010286
RAX: 4141414141414141 RBX: 000000000000001b RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9903e76c100f RDI: ffff9904289d4b28
RBP: ffffbc6a40493c70 R08: 0000000093570362 R09: 0000000000000000
R10: 0000000000000000 R11: ffff9904344eae38 R12: ffff9904289d4000
R13: 0000000000000000 R14: 00000000ffffffa3 R15: ffff9903e76c100f
FS: 0000000000000000(0000) GS:ffff990434580000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feed125a000 CR3: 00000001b860a003 CR4: 00000000003606e0
Call Trace:
process_adv_report+0x12e/0x560 [bluetooth]
hci_le_meta_evt+0x7b2/0xba0 [bluetooth]
hci_event_packet+0x1c29/0x2a90 [bluetooth]
hci_rx_work+0x19b/0x360 [bluetooth]
process_one_work+0x1eb/0x3b0
worker_thread+0x4d/0x400
kthread+0x104/0x140
Fixes: c215e9397b00 ("Bluetooth: Process extended ADV report event")
Reported-by: Andy Nguyen <theflow@google.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Alain Michaud <alainm@chromium.org>
Tested-by: Sonny Sasaka <sonnysasaka@chromium.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix build error for the case:
defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
config: keystone_defconfig
CC arch/arm/kernel/signal.o
In file included from ../include/linux/random.h:14,
from ../arch/arm/kernel/signal.c:8:
../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
: "Q" (*(const unsigned long *)current_stack_pointer));
^~~~~~~~~~~~~~~~~~~~~
user_stack_pointer
Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We observed two panics involving races with igb_reset_task.
The first panic is caused by this race condition:
kworker reboot -f
igb_reset_task
igb_reinit_locked
igb_down
napi_synchronize
__igb_shutdown
igb_clear_interrupt_scheme
igb_free_q_vectors
igb_free_q_vector
adapter->q_vector[v_idx] = NULL;
napi_disable
Panics trying to access
adapter->q_vector[v_idx].napi_state
The second panic (a divide error) is caused by this race:
kworker reboot -f tx packet
igb_reset_task
__igb_shutdown
rtnl_lock()
...
igb_clear_interrupt_scheme
igb_free_q_vectors
adapter->num_tx_queues = 0
...
rtnl_unlock()
rtnl_lock()
igb_reinit_locked
igb_down
igb_up
netif_tx_start_all_queues
dev_hard_start_xmit
igb_xmit_frame
igb_tx_queue_mapping
Panics on
r_idx % adapter->num_tx_queues
This commit applies to igb_reset_task the same changes that
were applied to ixgbe in commit 2f90b8657ec9 ("ixgbe: this patch
adds support for DCB to the kernel and ixgbe driver"),
commit 8f4c5c9fb87a ("ixgbe: reinit_locked() should be called with
rtnl_lock") and commit 88adce4ea8f9 ("ixgbe: fix possible race in
reset subtask").
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After 'commit e086ba2fccda4 ("e1000e: disable s0ix entry and exit flows
for ME systems")',
ThinkPad P14s always failed to disable ULP by ME.
'commit 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")'
break out of init phy:
error log:
[ 42.364753] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP
[ 42.524626] e1000e 0000:00:1f.6 enp0s31f6: PHY Wakeup cause - Unicast Packet
[ 42.822476] e1000e 0000:00:1f.6 enp0s31f6: Hardware Error
When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1.
If continue to init phy like before, it can work as before.
iperf test result good too.
Fixes: 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Daniel Díaz and Kees Cook independently reported that commit
f227e3ec3b5c ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.
The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.
This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips. Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently. When backporting, such options might still be considered
if this patch fails to help.
[ It turns out that an alternate fix seems to be to just remove the
troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
that causes the circular dependency.
But we might as well do the whole belt-and-suspenders thing, and
minimize inclusion in <linux/random.h> too. Either will fix the
problem, and both are good changes. - Linus ]
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: f227e3ec3b5c
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure that the ARM PMU PROFILING AND DEBUGGING maintainers are included
for the HiSilicon PMU driver.
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1592392648-128331-1-git-send-email-john.garry@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Although iph is expected to point to at least 20 bytes of valid memory,
ihl may be bogus, for example on reception of a corrupt packet. If it
happens to be less than 5, we really don't want to run away and
dereference 16GB worth of memory until it wraps back to exactly zero...
Fixes: 0e455d8e80aa ("arm64: Implement optimised IP checksum helpers")
Reported-by: guodeqing <geffrey.guo@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
asm/pointer_auth.h is not needed anymore in asm/smp.h, as 62a679cb2825
("arm64: simplify ptrauth initialization") removed the keys from the
secondary_data structure.
This also cures a compilation issue introduced by f227e3ec3b5c
("random32: update the net random state on interrupt and activity").
Fixes: 62a679cb2825 ("arm64: simplify ptrauth initialization")
Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit f7b93d42945c ("arm64/alternatives: use subsections for replacement
sequences") breaks LLVM's integrated assembler, because due to its
one-pass design, it cannot compute instruction sequence lengths before the
layout for the subsection has been finalized. This change fixes the build
by moving the .org directives inside the subsection, so they are processed
after the subsection layout is known.
Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1078
Link: https://lore.kernel.org/r/20200730153701.3892953-1-samitolvanen@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As noted in:
https://www.kernel.org/doc/Documentation/kbuild/kconfig-language.txt
"select should be used with care. select will force a symbol to a
value without visiting the dependencies."
Config VIRTIO_MEM should not select CONTIG_ALLOC directly.
Otherwise it will cause an error:
https://bugzilla.kernel.org/show_bug.cgi?id=208245
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Link: https://lore.kernel.org/r/20200619080333.194753-1-chenweilong@huawei.com
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
|
|
This regressed some working configurations so revert it. Will
fix this properly for 5.9 and backport then.
This reverts commit 38e0c89a19fd13f28d2b4721035160a3e66e270b.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This patch fixes a race condition that causes a use-after-free during
amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits
are requested and the second one finishes before the first. Essentially,
this bug occurs when the following sequence of events happens:
1. Non-blocking commit #1 is requested w/ a new dm_state #1 and is
deferred to the workqueue.
2. Non-blocking commit #2 is requested w/ a new dm_state #2 and is
deferred to the workqueue.
3. Commit #2 starts before commit #1, dm_state #1 is used in the
commit_tail and commit #2 completes, freeing dm_state #1.
4. Commit #1 starts after commit #2 completes, uses the freed dm_state
1 and dereferences a freelist pointer while setting the context.
Since this bug has only been spotted with fast commits, this patch fixes
the bug by clearing the dm_state instead of using the old dc_state for
fast updates. In addition, since dm_state is only used for its dc_state
and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found,
removing the dm_state should not have any consequences in fast updates.
This use-after-free bug has existed for a while now, but only caused a
noticeable issue starting from 5.7-rc1 due to 3202fa62f ("slub: relocate
freelist pointer to middle of object") moving the freelist pointer from
dm_state->base (which was unused) to dm_state->context (which is
dereferenced).
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383
Fixes: bd200d190f45 ("drm/amd/display: Don't replace the dc_state for fast updates")
Reported-by: Duncan <1i5t5.duncan@cox.net>
Signed-off-by: Mazin Rezk <mnrzk@protonmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Compiler leaves a 4-byte hole near the end of `dev_info`, causing
amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace
when `size` is greater than 356.
In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which
unfortunately does not initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org
Fixes: c193fa91b918 ("drm/amdgpu: information leak in amdgpu_info_ioctl()")
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The memory allocated for the DIM wasn't freed in in error unwind path, fix
it by calling to rdma_dim_destroy().
Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs")
Link: https://lore.kernel.org/r/20200730082719.1582397-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com <mailto:maxg@mellanox.com>>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
HW destroy operation should be last operation after all possible CQ users
completed their work, so move DIM work cancellation before such destroy
call.
Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs")
Link: https://lore.kernel.org/r/20200730082719.1582397-3-leon@kernel.org
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In DCT and RSS RAW QP creation flows, the QP mutex wasn't initialized and
the magic field inside lock was missing. This caused to the following
kernel warning for kernels build with CONFIG_DEBUG_MUTEXES.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 16261 at kernel/locking/mutex.c:938 __mutex_lock+0x60e/0x940
Modules linked in: bonding nf_tables ipip tunnel4 geneve ip6_udp_tunnel udp_tunnel ip6_gre ip6_tunnel tunnel6 ip_gre gre ip_tunnel mlx5_ib mlx5_core mlxfw ptp pps_core rdma_ucm ib_uverbs ib_ipoib ib_umad openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay ib_srp scsi_transport_srp rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core [last unloaded: mlxfw]
CPU: 3 PID: 16261 Comm: ib_send_bw Not tainted 5.8.0-rc4_for_upstream_min_debug_2020_07_08_22_04 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x60e/0x940
Code: c0 0f 84 6d fa ff ff 44 8b 15 4e 9d ba 00 45 85 d2 0f 85 5d fa ff ff 48 c7 c6 f2 de 2b 82 48 c7 c7 f1 8a 2b 82 e8 d2 4d 72 ff <0f> 0b 4c 8b 4d 88 e9 3f fa ff ff f6 c2 04 0f 84 37 fe ff ff 48 89
RSP: 0018:ffff88810bb8b870 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88829f1dd880 RSI: 0000000000000000 RDI: ffffffff81192afa
RBP: ffff88810bb8b910 R08: 0000000000000000 R09: 0000000000000028
R10: 0000000000000000 R11: 0000000000003f85 R12: 0000000000000002
R13: ffff88827d8d3ce0 R14: ffffffffa059f615 R15: ffff8882a4d02610
FS: 00007f3f6988e740(0000) GS:ffff8882f5b80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556556158000 CR3: 000000010a63c005 CR4: 0000000000360ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? cmd_exec+0x947/0xe60 [mlx5_core]
? __mutex_lock+0x76/0x940
? mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib]
mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib]
mlx5_ib_counter_bind_qp+0x9b/0xe0 [mlx5_ib]
__rdma_counter_bind_qp+0x6b/0xa0 [ib_core]
rdma_counter_bind_qp_auto+0x363/0x520 [ib_core]
_ib_modify_qp+0x316/0x580 [ib_core]
ib_modify_qp_with_udata+0x19/0x30 [ib_core]
modify_qp+0x4c4/0x600 [ib_uverbs]
ib_uverbs_ex_modify_qp+0x87/0xe0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x129/0x1c0 [ib_uverbs]
ib_uverbs_cmd_verbs.isra.5+0x5d5/0x11f0 [ib_uverbs]
? ib_uverbs_handler_UVERBS_METHOD_QUERY_CONTEXT+0x120/0x120 [ib_uverbs]
? lock_acquire+0xb9/0x3a0
? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs]
? ib_uverbs_ioctl+0x175/0x210 [ib_uverbs]
ib_uverbs_ioctl+0x14b/0x210 [ib_uverbs]
? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs]
ksys_ioctl+0x234/0x7d0
? exc_page_fault+0x202/0x640
? do_syscall_64+0x1f/0x2e0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x59/0x2e0
? asm_exc_page_fault+0x8/0x30
? rcu_read_lock_sched_held+0x52/0x60
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: b4aaa1f0b415 ("IB/mlx5: Handle type IB_QPT_DRIVER when creating a QP")
Link: https://lore.kernel.org/r/20200730082719.1582397-2-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
