summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon (follow)
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: Remove devm_hwmon_device_unregister() API functionGuenter Roeck2024-09-131-7/+0
| | | | | | | | | | | | devm_hwmon_device_unregister() has no in-tree user, and its implementation is wrong since it does not pass the to-be-removed hardware monitoring device as parameter. I do not envision a valid use for it; drivers needing it should not have called devm_hwmon_device_register_with_info() in the first place. Remove it. Reported-by: Matthew Sanders <m@ttsande.rs> Closes: https://lore.kernel.org/linux-hwmon/488b3bdf870ea76c4b943dbe5fd15ac8113019dc.camel@kernel.org/ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (ina2xx) Add support for current limitsGuenter Roeck2024-08-301-0/+4
| | | | | | | | | | | | | While the chips supported by this driver do not directly support current limits, they do support setting shunt voltage limits. The shunt voltage divided by the shunt resistor value is the current. On top of that, calibration values are set such that in the shunt voltage register and the current register report the same values. That means we can report and configure current limits based on shunt voltage limits, and we can do so with much better accuracy than by setting shunt voltage limits. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Add sophgo SG2042 external hardware monitor supportInochi Amaoto2024-08-272-0/+79
| | | | | | | | | | | SG2042 use an external MCU to provide basic hardware information and thermal sensors. Add driver support for the onboard MCU of SG2042. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Message-ID: <IA1PR20MB49536C786048D1E676BB9C20BB822@IA1PR20MB4953.namprd20.prod.outlook.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (oxp-sensors) Add support for multiple new devices.Derek J. Clark2024-08-271-18/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the OrangePi NEO-01. It uses different registers for PWM manual mode, set PWM, and read fan speed than previous devices. Valid PWM input and duty cycle is 1-244, we scale this from 1-255 to maintain compatibility with the existing interface. Add OneXPlayer 2 series, OneXFly, and X1 series models. The 2/X1 series use new registers for turbo button takeover and read fan speed. X1 has an Intel variant so change the CPU detection at init to only check for the affected devices. While at it, adjust formatting of some constants and reorder all cases alphabetically for consistency. Rename OXP_OLD constants to OXP_MINI for disambiguation. Update code comments for clarity. Add support for AYANEO models 2S, AIR 1S, Flip series, GEEK 1S, and KUN. Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com> Tested-by: Kevin Greenberg <kdgreenberg234@protonmail.com> Tested-by: Joshua Tam <csinaction@pm.me> Tested-by: Parth Menon <parthasarathymenon@gmail.com> Tested-by: Philip Müller <philm@manjaro.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408160329.TLNbIwRC-lkp@intel.com/ Message-ID: <20240822183525.27289-2-derekjohn.clark@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm92) Update documentationGuenter Roeck2024-08-271-13/+13
| | | | | | | | | Update datasheet references. Replace misleading 'force parameter needed' with 'must be instantiated explicitly'. Explain the reason for the missing auto-detection. Mention all supported chips in Kconfig. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (max1619) Convert to use regmapGuenter Roeck2024-07-311-4/+0
| | | | | | | | | | | | Use regmap for local caching, to hide register read/write address differences, and for multi-byte operations. With this change, the driver specific lock is no longer necessary. While at it, check errors seen when initializing the chip and bail out if chip initialization fails. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (oxp-sensors) Fix typo in driver documentationCryolitia PukNgae2024-07-311-1/+1
| | | | | | | | RMP -> RPM Signed-off-by: Cryolitia PukNgae <Cryolitia@gmail.com> Link: https://lore.kernel.org/r/20240726-typo-v1-1-3ca3f07f93e9@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Merge tag 'hwmon-for-v6.11' of ↵Linus Torvalds2024-07-1614-189/+610
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "Obsolete driver removals: - Removed obsolete adm1021 and max6642 drivers New drivers: - MPS MP2891, MP2993, MP9941, and MP5920 - SPD5118 (Temperature Sensor and EEPROM) Added device support to existing drivers: - g762: G761 - dell-smm: Dell OptiPlex 7060 - asus-ec-sensors: ProArt X670E-CREATOR WIFI - corsair-psu: HX1200i Series 2023 psu - nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller Notable enhancements and fixes: - Removed use of i2c_match_id() - Constified struct regmap_config where feasible - Cleaned up amc6821 driver, and converted to use regmap and with_info API - Converted max6639 driver to use with_info API; added support for additional sysfs attributes - Fixed various sysfs attribute underflows - Added PEC support to hwmon core, and use in lm90 and max31827 drivers And various other minor fixes and improvements" * tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (103 commits) hwmon: (max6697) Fix swapped temp{1,8} critical alarms hwmon: (max6697) Fix underflow when writing limit attributes hwmon: Remove obsolete adm1021 and max6642 drivers hwmon: (pmbus/ltc4286) Drop unused i2c device ids hwmon: (g762) Initialize fans after configuring clock hwmon: (amc6821) Add support for pwm1_mode attribute hwmon: (amc6821) Convert to with_info API hwmon: (amc6821) Convert to use regmap hwmon: (amc6821) Drop unnecessary enum chips hwmon: (amc6821) Use BIT() and GENMASK() hwmon: (amc6821) Use tabs for column alignment in defines hwmon: (amc6821) Reorder include files, drop unnecessary ones hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4 hwmon: (amc6821) Rename fan1_div to fan1_pulses hwmon: (amc6821) Make reading and writing fan speed limits consistent hwmon: (amc6821) Stop accepting invalid pwm values hwmon: (w83627ehf) Fix underflows seen when writing limit attributes hwmon: (nct6775-core) Fix underflows seen when writing limit attributes hwmon: (lm95234) Fix underflows seen when writing limit attributes hwmon: (adc128d818) Fix underflows seen when writing limit attributes ...
| * hwmon: Remove obsolete adm1021 and max6642 driversGuenter Roeck2024-07-143-182/+0
| | | | | | | | | | | | | | | | ADM1021, MAX6642, and compatible chips are supported by the lm90 driver. Remove the obsolete stand-alone drivers to reduce maintenance overhead. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (amc6821) Add support for pwm1_mode attributeGuenter Roeck2024-07-081-0/+1
| | | | | | | | | | | | | | | | AMC6821 supports configuring if a fan is DC or PWM controlled. Add support for the pwm1_mode attribute to make it runtime configurable. Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4Guenter Roeck2024-07-081-0/+4
| | | | | | | | | | | | | | | | After setting fan1_target and setting pwm1_enable to 4, the fan controller tries to achieve the requested fan speed. Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (amc6821) Rename fan1_div to fan1_pulsesGuenter Roeck2024-07-081-1/+1
| | | | | | | | | | | | | | | | | | The chip does not have a fan divisor. What it does have is a configuration to set either 2 or 4 pulses per fan rotation. Rename the attribute to reflect its use. Update documentation accordingly. Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: add MP5920 driverAlex Vdovydchenko2024-07-022-0/+92
| | | | | | | | | | | | | | | | | | | | | | Add support for MPS Hot-Swap controller mp5920. This driver exposes telemetry and limit value readings and writings. Signed-off-by: Alex Vdovydchenko <xzeol@yahoo.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20240702115252.981416-3-xzeol@yahoo.com [groeck: Use min_t() to limit length of displayed model string] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (dell-smm) Add Dell OptiPlex 7060 to DMI tableArmin Wolf2024-06-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The BIOS on this machine is buggy and will in some cases return an error when trying to get the fan state, but reading of the RPM values and the temperature sensors still works. Closes: https://github.com/vitorafsr/i8kutils/issues/38 Signed-off-by: Armin Wolf <W_Armin@gmx.de> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20240628214723.19665-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: add MP2891 driverNoah Wang2024-06-282-0/+180
| | | | | | | | | | | | | | | | | | Add support for MPS VR controller mp2891. This driver exposes telemetry and limit value readings and writtings. Signed-off-by: Noah Wang <noahwang.wang@outlook.com> Link: https://lore.kernel.org/r/SEYPR04MB64828A352836982C0184AA10FAD62@SEYPR04MB6482.apcprd04.prod.outlook.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: add MP9941 driverNoah Wang2024-06-132-0/+93
| | | | | | | | | | | | | | | | | | | | Add support for MPS step-down converter mp9941. This driver exposes telemetry and limit value readings and writtings. Signed-off-by: Noah Wang <noahwang.wang@outlook.com> Link: https://lore.kernel.org/r/SEYPR04MB648294005D55F70736B519F6FAC72@SEYPR04MB6482.apcprd04.prod.outlook.com [groeck: Include bitfield.h (for FIELD_PREP) and bits.h (for GENMASK)] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: add MP2993 driverNoah Wang2024-06-122-0/+151
| | | | | | | | | | | | | | | | | | Add support for MPS VR controller mp2993. This driver exposes telemetry and limits value readings and writtings. Signed-off-by: Noah Wang <noahwang.wang@outlook.com> Link: https://lore.kernel.org/r/SEYPR04MB648203DC017A514837DB1204FAC72@SEYPR04MB6482.apcprd04.prod.outlook.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (asus-ec-sensors) add ProArt X670E-CREATOR WIFIEugene Shalygin2024-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | Provided and tested by a user in a GitHub PR [1]. [1] https://github.com/zeule/asus-ec-sensors/pull/56 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20240608085146.572777-2-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (spd5118) Add support for reading SPD dataGuenter Roeck2024-06-101-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Add support for reading SPD NVMEM data from SPD5118 (Jedec JESD300) compliant memory modules. NVMEM write operation is not supported. NVMEM support is optional. If CONFIG_NVMEM is disabled, the driver will still instantiate but not provide NVMEM attribute files. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Tested-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: Add support for SPD5118 compliant temperature sensorsGuenter Roeck2024-06-102-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for SPD5118 (Jedec JESD300) compliant temperature sensors. Such sensors are typically found on DDR5 memory modules. Cc: René Rebe <rene@exactcode.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Tested-by: Thomas Weißschuh <linux@weissschuh.net> Tested-by: Stephen Horvath <s.horvath@outlook.com.au> Tested-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (max31827) Add PEC supportRadu Sabau2024-06-041-3/+10
| | | | | | | | | | | | | | | | | | | | Add PEC support using the hwmon core infrastructure. Signed-off-by: Radu Sabau <radu.sabau@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240531084645.12935-2-radu.sabau@analog.com [groeck: Adjusted subject; simplified description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: corsair-psu: add USB id of HX1200i Series 2023 psuWilken Gottwalt2024-05-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | Add the usb id of the HX1200i Series 2023. Update the documentation accordingly. Also fix the version comments, there are no Series 2022 products. That are legacy or first version products going back many many years. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZlAZs4u0dU7JxtDf@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (corsair-cpro) Add firmware and bootloader informationMarius Zachmann2024-05-301-0/+8
| | | | | | | | | | | | | | | | | | Add support for reporting firmware and bootloader version using debugfs. Update documentation accordingly. Signed-off-by: Marius Zachmann <mail@mariuszachmann.de> Link: https://lore.kernel.org/r/20240513194734.43040-2-mail@mariuszachmann.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: add ChromeOS EC driverThomas Weißschuh2024-06-032-0/+27
|/ | | | | | | | | | | | | | The ChromeOS Embedded Controller exposes fan speed and temperature readings. Expose this data through the hwmon subsystem. The driver is designed to be probed via the cros_ec mfd device. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240529-cros_ec-hwmon-v4-2-5cdf0c5db50a@weissschuh.net [tzungbi: Fixed typo in MAINTAINERS: "chros_ec_hwmon" -> "cros_ec_hwmon"] Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
* hwmon: (emc1403) Add support for EMC1428 and EMC1438.Lars Petter Mostad2024-05-121-3/+14
| | | | | | | | | | EMC1428 and EMC1438 are similar to EMC14xx, but have eight temperature channels, as well as signed data and limit registers. Chips currently supported by this driver have unsigned registers only. Signed-off-by: Lars Petter Mostad <larspm@gmail.com> Link: https://lore.kernel.org/r/20240510142824.824332-1-lars.petter.mostad@appear.net Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Drop explicit initialization of struct i2c_device_id::driver_data to 0Uwe Kleine-König2024-05-011-1/+1
| | | | | | | | | | | | | These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240430085654.1028864-2-u.kleine-koenig@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nzxt-kraken3) Add support for NZXT Kraken 2023 (standard and Elite) ↵Aleksa Savic2024-04-301-8/+11
| | | | | | | | | | | | | | models Add support for NZXT Kraken 2023 (standard) and NZXT Kraken 2023 Elite all-in-one CPU coolers. These models communicate identically to the NZXT Kraken Z-series (Z53 code paths) in all cases except when writing the fan curve, where setting additional bits in the report is needed. Reviewed-by: Jonas Malaco <jonas@protocubo.io> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20240428104812.14037-3-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) Add support for Infineon XDP710Peter Yin2024-04-302-0/+84
| | | | | | | | | Add support for Infineon XDP710.This is a Hot-Swap Controller. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240425153608.4003782-2-peteryin.openbmc@gmail.com [groeck: s/microOhmRsense/micro_ohm_osense/g; declared array static] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (aquacomputer_d5next) Add support for Octo flow sensor pulsesAleksa Savic2024-04-301-1/+2
| | | | | | | | | | | | Add support for reading and writing the flow sensor pulses on the Aquacomputer Octo. Implemented by David Flemstrom [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/95 Originally-from: David Flemstrom <david.flemstrom@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20240417175037.32499-3-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (aquacomputer_d5next) Add support for Octo flow sensorAleksa Savic2024-04-301-4/+4
| | | | | | | | | | | | Add support for reading the flow sensor value on the Aquacomputer Octo. Implemented by David Flemstrom [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/95 Originally-from: David Flemstrom <david.flemstrom@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20240417175037.32499-2-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/adm1275) add adm1281 supportJose Ramon San Buenaventura2024-04-281-3/+11
| | | | | | | | | Add support for adm1281 which is similar to adm1275 and other chips of the series. Signed-off-by: Jose Ramon San Buenaventura <jose.sanbuenaventura@analog.com> Link: https://lore.kernel.org/r/20240425070948.25788-3-jose.sanbuenaventura@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) Add driver for ADP1050Radu Sabau2024-04-282-0/+65
| | | | | | | | | | | | | | | | | Add support for ADP1050 Digital Controller for Isolated Power Supplies with PMBus interface Voltage, Current and Temperature Monitor. The ADP1050 implements several features to enable a robust system of parallel and redundant operation for customers who require high availability. The device can measure voltage, current and temperature that can be used in different techniques to identify and safely shut down an erroneous power supply in parallel operation mode. Signed-off-by: Radu Sabau <radu.sabau@analog.com> Link: https://lore.kernel.org/r/20240321142201.10330-2-radu.sabau@analog.com [groeck: Fixed corrupted link in documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm70) fix links in doc and commentsKousik Sanagavarapu2024-04-281-1/+1
| | | | | | | | | | | | | | Update links in the documentation and in-code comments which point to the datasheet. The current links don't work because National Semiconductor (which is the original manufacturer of this chip) has been a part of Texas Instruments since 2011 and http://www.national.com/ doesn't work anymore. Fixes: e1a8e913f97e ("[PATCH] lm70: New hardware monitoring driver") Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com> Link: https://lore.kernel.org/r/20240318154540.90613-3-five231003@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tachBilly Tsai2024-03-072-0/+27
| | | | | | | | | | | | | | The driver support two functions: PWM and Tachometer. The PWM feature can handle up to 16 output ports, while the Tachometer can monitor to up to 16 input ports as well. This driver implements them by exposing two kernel subsystems: PWM and HWMON. The PWM subsystem can be utilized alongside existing drivers for controlling elements such as fans (pwm-fan.c), beepers (pwm-beeper.c) and so on. Through the HWMON subsystem, the driver provides sysfs interfaces for fan. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20240221104025.1306227-4-billy_tsai@aspeedtech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (max6620) Update broken Datasheet URL in driver documentationOkan Akyuz2024-02-251-1/+1
| | | | | | | | | | The URL for the MAX6620 datasheet has changed. Update it to reflect the current location. Signed-off-by: Okan Akyuz <okanakyuz@okanakyuz.com> Link: https://lore.kernel.org/r/20240216075212.69118-1-okanakyuz@okanakyuz.com [groeck: Updated subject and patch description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (oxp-sensors) Add support for Ayaneo Air Plus 7320u.Sebastian Kranz2024-02-251-0/+1
| | | | | | | | | | | | Add support for handheld AYANEO AIR Plus with the same EC registers to add proper fan control. Functionality was tested successfully. Signed-off-by: Sebastian Kranz <tklightforce@googlemail.com> Link: https://lore.kernel.org/r/20240209090157.3232-1-tklightforce@googlemail.com [groeck: Fixed up commit message] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Add driver for Astera Labs PT5161L retimerCosmo Chou2024-02-252-0/+43
| | | | | | | | | | | | | This driver implements support for temperature monitoring of Astera Labs PT5161L series PCIe retimer chips. This driver implementation originates from the CSDK available at Link: https://github.com/facebook/openbmc/tree/helium/common/recipes-lib/retimer-v2.14 The communication protocol utilized is based on the I2C/SMBus standard. Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com> Link: https://lore.kernel.org/r/20240206125420.3884300-2-chou.cosmo@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Add driver for ASUS ROG RYUJIN II 360 AIO coolerAleksa Savic2024-02-252-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | This driver exposes hardware sensors of the ASUS ROG RYUJIN II 360 all-in-one CPU liquid cooler, which communicates through a proprietary USB HID protocol. Report offsets were initially discovered in [1] by Florian Freudiger. Available sensors are pump, internal and external (controller) fan speed in RPM, their duties in PWM, as well as coolant temperature. Attaching external fans to the controller is optional and allows them to be controlled from the device. If not connected, the fan-related sensors will report zeroes. The controller is a separate hardware unit that comes bundled with the AIO and connects to it to allow fan control. The addressable LCD screen is not supported in this driver and should be controlled through userspace tools. [1]: https://github.com/liquidctl/liquidctl/pull/653 Tested-by: Florian Freudiger <florian.freudiger@proton.me> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20240108094453.22986-1-savicaleksa83@gmail.com [groeck: Add HID dependency] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Add driver for NZXT Kraken X and Z series AIO CPU coolersAleksa Savic2024-02-252-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature and pump speed (in RPM), as well as PWM control (natively only through a temp-PWM curve, but the driver also emulates fixed PWM control on top of that). The Z-series models additionally expose the speed and duty of an optionally connected fan, with the same PWM control capabilities. Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is for the manual control mode and 2 is for the liquid temp to PWM curve mode. Writing a 0 disables control of the channel through the driver after setting its duty to 100%. As it is not possible to query the device for the active mode, the driver keeps track of it. The temperature of the curves relates to the fixed [20-59] C range, per device limitations, and correlating to the detected liquid temperature. Only PWM values (ranging from 0-255) can be set. The addressable RGB LEDs and LCD screen, included only on Z-series models, are not supported in this driver. Co-developed-by: Jonas Malaco <jonas@protocubo.io> Signed-off-by: Jonas Malaco <jonas@protocubo.io> Co-developed-by: Yury Zhuravlev <stalkerg@gmail.com> Signed-off-by: Yury Zhuravlev <stalkerg@gmail.com> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20240129111932.368232-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Add support for Amphenol ChipCap 2Javier Carrasco2024-02-252-0/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Amphenol ChipCap 2 is a capacitive polymer humidity and temperature sensor with an integrated EEPROM and minimum/maximum humidity alarms. All device variants offer an I2C interface and depending on the part number, two different output modes: - CC2D: digital output - CC2A: analog (PDM) output This driver adds support for the digital variant (CC2D part numbers), which includes the following part numbers: - non-sleep measurement mode (CC2D23, CC2D25, CC2D33, CC2D35) - sleep measurement mode (CC2D23S, CC2D25S, CC2D33S, CC2D35S) The Chipcap 2 EEPROM can be accessed to configure a series of parameters like the minimum/maximum humidity alarm threshold and hysteresis. The EEPROM is only accessible in the command window after a power-on reset. The default window lasts 10 ms if no Start_CM command is sent. After the command window is finished (either after the mentioned timeout of after a Start_NOM command is sent), the device enters the normal operation mode and makes a first measurement automatically. Unfortunately, the device does not provide any hardware or software reset and therefore the driver must trigger power cycles to enter the command mode. A dedicated, external regulator is required for that. This driver keeps the device off until a measurement or access to the EEPROM is required, making use of the first automatic measurement to avoid different code paths for sleep and non-sleep devices. The minimum and maximum humidity alarms are configured with two registers per alarm: one stores the alarm threshold and the other one keeps the value that turns off the alarm. The alarm signals are only updated when a measurement is carried out. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20240130-topic-chipcap2-v6-5-260bea05cf9b@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (sht3x) read out sensor serial numberStefan Gloor2024-02-251-0/+11
| | | | | | | | | | | | | | The temperature/humidity sensors of the STS3x/SHT3x family are calibrated and factory-programmed with a unique serial number. For some sensors, this serial number can be used to obtain a calibration certificate via an API provided by the manufacturer (Sensirion). Expose the serial number via debugfs. Tested with: 2x STS31, 1x STS32, 1x SHT31 Signed-off-by: Stefan Gloor <code@stefan-gloor.ch> Link: https://lore.kernel.org/r/20240131111512.25321-2-code@stefan-gloor.ch Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down ConverterCharles Hsu2024-02-252-0/+95
| | | | | | | | | | Add support for mpq8785 device from Monolithic Power Systems, Inc. (MPS) vendor. This is synchronous step-down controller. Signed-off-by: Charles Hsu <ythsu0511@gmail.com> Link: https://lore.kernel.org/r/20240131074822.2962078-2-ythsu0511@gmail.com [groeck: probe_new --> probe; add MODULE_IMPORT_NS(PMBUS)] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: add fan speed monitoring driver for Surface devicesIvor Wanders2024-02-252-0/+26
| | | | | | | | | | | | | | | | | Adds a driver that provides read only access to the fan speed for Microsoft Surface Pro devices. The fan speed is always regulated by the EC and cannot be influenced directly. Signed-off-by: Ivor Wanders <ivor@iwanders.net> Link: https://github.com/linux-surface/kernel/pull/144 Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20240131005856.10180-2-ivor@iwanders.net [groeck: - Declare surface_fan_hwmon_is_visible() static - Add dependency on SURFACE_AGGREGATOR_BUS ] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Add driver for LTC4282Nuno Sa2024-02-252-0/+134
| | | | | | | | | | | | | The LTC4282 hot swap controller allows a board to be safely inserted and removed from a live backplane. Using one or more external N-channel pass transistors, board supply voltage and inrush current are ramped up at an adjustable rate. An I2C interface and onboard ADC allows for monitoring of board current, voltage, power, energy and fault status. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240129-b4-ltc4282-support-v4-3-fe75798164cc@analog.com [groeck: clamp value range in ltc4282_write_voltage_byte_cached()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Drop non-functional I2C_CLASS_HWMON support for drivers w/o detect()Heiner Kallweit2024-02-111-1/+0
| | | | | | | | | | | | | | | Class-based I2C probing requires detect() and address_list both to be set in the I2C client driver, see checks in i2c_detect(). It's misleading to declare I2C_CLASS_HWMON support if the driver doesn't implement detect(). Class-based probing is a legacy mechanism, in addition apparently nobody ever noticed that class-based probing has been non-functional in both drivers from the very beginning. So drop the fragments of class-based probing support. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/13ce7c11-a958-4892-ada9-faf5bfdcb89d@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct6683) Add another customer ID for MSIForest Crossman2024-02-111-0/+1
| | | | | | | | This value was found on an MSI PRO X670-P WIFI with an NCT6687D chip. Signed-off-by: Forest Crossman <cyrozap@gmail.com> Link: https://lore.kernel.org/r/CAO3ALPwot01+bBisj7Roog7SD9UwV+y4NtiakKrBDE0tPvFhbw@mail.gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add AMS AS6200 temperature sensorAbdel Alkuor2024-01-021-0/+10
| | | | | | | | | | | | | | | | | | as6200 is a temperature sensor with 0.0625°C resolution and a range between -40°C to 125°C. By default, the driver configures as6200 as following: - Converstion rate: 8 Hz - Conversion mode: continuous - Consecutive fault counts: 4 samples - Alert state: high polarity - Alert mode: comparator mode Interrupt is supported for the alert pin. Signed-off-by: Abdel Alkuor <alkuor@gmail.com> Link: https://lore.kernel.org/r/d1686678991bf8ee0d00cb08ca046798f37ca4b3.1703127334.git.alkuor@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) Add support for MPS Multi-phase mp2856/mp2857 controllerPeter Yin2024-01-022-0/+99
| | | | | | | | | | | | Add support for mp2856/mp2857 device from Monolithic Power Systems, Inc. (MPS) vendor. This is a dual-loop, digital, multi-phase, modulation controller. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Signed-off-by: Potin Lai <potin.lai.pt@gmail.com> Link: https://lore.kernel.org/r/20231211160519.21254-3-potin.lai.pt@gmail.com [groeck: Fix checkpatch issues, use i2c_get_match_data()] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Add driver for Gigabyte AORUS Waterforce AIO coolersAleksa Savic2024-01-022-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | This driver exposes hardware sensors of the Gigabyte AORUS Waterforce all-in-one CPU liquid coolers, which communicate through a proprietary USB HID protocol. Report offsets were initially discovered in [1] and confirmed by me on a Waterforce X240 by observing the sent reports from the official software. Available sensors are pump and fan speed in RPM, as well as coolant temperature. Also available through debugfs is the firmware version. Attaching a fan is optional and allows it to be controlled from the device. If it's not connected, the fan-related sensors will report zeroes. The addressable RGB LEDs and LCD screen are not supported in this driver and should be controlled through userspace tools. [1]: https://github.com/liquidctl/liquidctl/issues/167 Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20231207122402.107032-1-savicaleksa83@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (sht3x) add sts3x supportStefan Gloor2024-01-021-8/+21
| | | | | | | | | Add information regarding the existing support for sts3x series and update the datasheet links. Signed-off-by: Stefan Gloor <code@stefan-gloor.ch> Link: https://lore.kernel.org/r/20231204165004.8491-2-code@stefan-gloor.ch Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 23:35:41 +0100