summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/compressed (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7Srinivas Ramana2016-10-021-1/+1
| | | | | | | | | | | | | | | | | | | If the bootloader uses the long descriptor format and jumps to kernel decompressor code, TTBCR may not be in a right state. Before enabling the MMU, it is required to clear the TTBCR.PD0 field to use TTBR0 for translation table walks. The commit dbece45894d3a ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but doesn't consider all the bits for the size of TTBCR.N. Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to indicate the use of TTBR0 and the correct base address width. Fixes: dbece45894d3 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores") Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Srinivas Ramana <sramana@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2016-03-207-47/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: "Another mixture of changes this time around: - Split XIP linker file from main linker file to make it more maintainable, and various XIP fixes, and clean up a resulting macro. - Decompressor cleanups from Masahiro Yamada - Avoid printing an error for a missing L2 cache - Remove some duplicated symbols in System.map, and move vectors/stubs back into kernel VMA - Various low priority fixes from Arnd - Updates to allow bus match functions to return negative errno values, touching some drivers and the driver core. Greg has acked these changes. - Virtualisation platform udpates form Jean-Philippe Brucker. - Security enhancements from Kees Cook - Rework some Kconfig dependencies and move PSCI idle management code out of arch/arm into drivers/firmware/psci.c - ARM DMA mapping updates, touching media, acked by Mauro. - Fix places in ARM code which should be using virt_to_idmap() so that Keystone2 can work. - Fix Marvell Tauros2 to work again with non-DT boots. - Provide a delay timer for ARM Orion platforms" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits) ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0 ARM: 8547/1: dma-mapping: store buffer information ARM: 8543/1: decompressor: rename suffix_y to compress-y ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile ARM: 8541/1: decompressor: drop redundant FORCE in Makefile ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files ARM: 8539/1: decompressor: drop more unneeded assignments to "targets" ARM: 8538/1: decompressor: drop unneeded assignments to "targets" ARM: 8532/1: uncompress: mark putc as inline ARM: 8531/1: turn init_new_context into an inline function ARM: 8530/1: remove VIRT_TO_BUS ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs ARM: make the physical-relative calculation more obvious ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL ARM: 8411/1: Add default SPARSEMEM settings ARM: 8503/1: clk_register_clkdev: remove format string interface ARM: 8529/1: remove 'i' and 'zi' targets ...
| *-----. Merge branches 'amba', 'fixes', 'misc' and 'tauros2' into for-nextRussell King2016-03-057-47/+18
| |\ \ \ \
| | | | * | ARM: 8543/1: decompressor: rename suffix_y to compress-yMasahiro Yamada2016-02-221-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "$(suffix_y)" no longer appears in the file names, but it just specifies the method of the file compression. The "compress-y" sounds more suitable. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | | * | ARM: 8542/1: decompressor: merge piggy.*.S and simplify MakefileMasahiro Yamada2016-02-227-38/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The files piggy.$(suffix).S are similar enough to be merged into a single file. This also allows clean up of the Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | | * | ARM: 8541/1: decompressor: drop redundant FORCE in MakefileMasahiro Yamada2016-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The object "piggy.$(suffix_y).o" is created from "piggy.$(suffix).S" by the following pattern rule defined in scripts/Makefile.build: $(obj)/%.o: $(src)/%.S FORCE $(call if_changed_dep,as_o_S) FORCE is already added to the prerequisite of the object there. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | | * | ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean filesMasahiro Yamada2016-02-221-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code works fine here, but it is tricky to use "extra-y" for specifying files to be removed during "make clean". Kbuild provides "clean-files" for this purpose. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | | * | ARM: 8539/1: decompressor: drop more unneeded assignments to "targets"Masahiro Yamada2016-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The objects "font.o" and "misc.o" are contained in $(OBJS), and it is already added to the "targets". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | | * | ARM: 8538/1: decompressor: drop unneeded assignments to "targets"Masahiro Yamada2016-02-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "targets" exists to specify which files need the corresponding ".*_cmd" files to be included during the build. In other words, it is used for files that need to detect the change of the command line by if_changed, if_changed_dep, and if_changed_rule. While, these files are just copied by "$(call cmd,shipped)". Adding them to the "targets" is meaningless because $(call cmd,...) never creates ".*_cmd" files. Such files as ".lib1funcs.S.cmd", ".ashldi3.S.cmd" do not exist in the first place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | | * | ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUsJean-Philippe Brucker2016-02-221-0/+2
| | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARMv6 CPUs do not have virtualisation extensions, but hyp-stub.S is still included into the image to keep it generic. In order to use ARMv7 instructions during HYP initialisation, add -march=armv7-a flag to hyp-stub's build. On an ARMv6 CPU, __hyp_stub_install returns as soon as it detects that the mode isn't HYP, so we will never reach those instructions. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | Merge tag 'devicetree-for-4.6' of ↵Linus Torvalds2016-03-191-0/+9
|\ \ \ \ \ | |_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - new tool 'dtx_diff' to diff DT files - sync kernel's dtc/libfdt to current dtc repo master - fix for reserved memory regions located in highmem - document standard unit suffixes for DT properties - various DT binding doc updates * tag 'devicetree-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add vendor prefix for eGalax_eMPIA Technology Inc Input: ads7846: Add description how to use internal reference (ADS7846) ARM: realview: add EB syscon variants to bindings devicetree: bindings: ARM: Use "uV" for micro-volt serial: fsl-imx-uart: Fix typo in fsl,dte-mode description of: add 'const' for of_property_*_string*() parameter '*np' of/unittest: fix infinite loop in of_unittest_destroy_tracked_overlays() of: alloc anywhere from memblock if range not specified kbuild: Allow using host dtc instead of kernel's copy of: resolver: Add missing of_node_get and of_node_put of: Add United Radiant Technology Corporation vendor prefix dt/bindings: add documentation on standard property unit suffixes scripts/dtc: Update to upstream commit b06e55c88b9b ARM: boot: Add an implementation of strnlen for libfdt scripts/dtc: dtx_diff - add info to error message dtc: create tool to diff device trees
| * | | | ARM: boot: Add an implementation of strnlen for libfdtRob Herring2016-02-121-0/+9
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | Recent versions of libfdt add a dependency on strnlen. Copy the implementation in lib/string.c here, so we can update libfdt. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Rob Herring <robh@kernel.org>
* | | | ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUsJean-Philippe Brucker2016-02-221-0/+2
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARMv6 CPUs do not have virtualisation extensions, but hyp-stub.S is still included into the image to keep it generic. In order to use ARMv7 instructions during HYP initialisation, add -march=armv7-a flag to hyp-stub's build. On an ARMv6 CPU, __hyp_stub_install returns as soon as it detects that the mode isn't HYP, so we will never reach those instructions. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | ARM: 8500/1: fix atags_to_fdt with stack-protector-strongKees Cook2016-01-271-0/+9
|/ / | | | | | | | | | | | | | | | | | | | | | | Building with CONFIG_CC_STACKPROTECTOR_STRONG triggers protection code generation under CONFIG_ARM_ATAG_DTB_COMPAT but this is too early for being able to use any of the stack_chk code. Explicitly disable it for only the atags_to_fdt bits. Suggested-by: zhxihu <zhxihu@marvell.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* / ARM: add UEFI stub supportRoy Franz2015-12-144-3/+192
|/ | | | | | | | | | | | | | | This patch adds EFI stub support for the ARM Linux kernel. The EFI stub operates similarly to the x86 and arm64 stubs: it is a shim between the EFI firmware and the normal zImage entry point, and sets up the environment that the zImage is expecting. This includes optionally loading the initrd and device tree from the system partition based on the kernel command line. Signed-off-by: Roy Franz <roy.franz@linaro.org> Tested-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
* lib/decompressors: use real out buf size for gunzip with kernelYinghai Lu2015-09-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When loading x86 64bit kernel above 4GiB with patched grub2, got kernel gunzip error. | early console in decompress_kernel | decompress_kernel: | input: [0x807f2143b4-0x807ff61aee] | output: [0x807cc00000-0x807f3ea29b] 0x027ea29c: output_len | boot via startup_64 | KASLR using RDTSC... | new output: [0x46fe000000-0x470138cfff] 0x0338d000: output_run_size | decompress: [0x46fe000000-0x47007ea29b] <=== [0x807f2143b4-0x807ff61aee] | | Decompressing Linux... gz... | | uncompression error | | -- System halted the new buffer is at 0x46fe000000ULL, decompressor_gzip is using 0xffffffb901ffffff as out_len. gunzip in lib/zlib_inflate/inflate.c cap that len to 0x01ffffff and decompress fails later. We could hit this problem with crashkernel booting that uses kexec loading kernel above 4GiB. We have decompress_* support: 1. inbuf[]/outbuf[] for kernel preboot. 2. inbuf[]/flush() for initramfs 3. fill()/flush() for initrd. This bug only affect kernel preboot path that use outbuf[]. Add __decompress and take real out_buf_len for gunzip instead of guessing wrong buf size. Fixes: 1431574a1c4 (lib/decompressors: fix "no limit" output buffer length) Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Jon Medhurst <tixy@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ARM: shmobile: Remove obsolete zboot supportGeert Uytterhoeven2015-07-062-75/+0
| | | | | | | | The last user of the zboot code was the KZM-A9-GT legacy board code, which has been removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* Merge tag 'devicetree-for-linus' of ↵Linus Torvalds2015-07-021-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree updates from Grant Likely: "A whole lot of bug fixes. Nothing stands out here except the ability to enable CONFIG_OF on every architecture, and an import of a newer version of dtc" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (22 commits) of/irq: Rename "intc_desc" to "of_intc_desc" to fix OF on sh of/irq: Fix pSeries boot failure Documentation: DT: Fix a typo in the filename "lantiq,<chip>-pinumx.txt" of: define of_find_node_by_phandle for !CONFIG_OF of/address: use atomic allocation in pci_register_io_range() of: Add vendor prefix for Zodiac Inflight Innovations dt/fdt: add empty versions of early_init_dt_*_memory_arch of: clean-up unnecessary libfdt include paths of: make unittest select OF_EARLY_FLATTREE instead of depend on it of: make CONFIG_OF user selectable MIPS: prepare for user enabling of CONFIG_OF of/fdt: fix argument name and add comments of unflatten_dt_node() of: return NUMA_NO_NODE from fallback of_node_to_nid() tps6507x.txt: Remove executable permission of/overlay: Grammar s/an negative/a negative/ of/fdt: Make fdt blob input parameters of unflatten functions const of: add helper function to retrive match data of: Grammar s/property exist/property exists/ of: Move OF flags to be visible even when !CONFIG_OF scripts/dtc: Update to upstream version 9d3649bd3be245c9 ...
| * libfdt: add fdt type definitionsRob Herring2015-04-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | In preparation for libfdt/dtc update, add the new fdt specific types. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org
* | Merge branch 'bsym' into for-nextRussell King2015-06-121-2/+2
|\ \ | | | | | | | | | | | | Conflicts: arch/arm/kernel/head.S
| * | ARM: replace BSYM() with badr assembly macroRussell King2015-05-081-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSYM() was invented to allow us to work around a problem with the assembler, where local symbols resolved by the assembler for the 'adr' instruction did not take account of their ISA. Since we don't want BSYM() used elsewhere, replace BSYM() with a new macro 'badr', which is like the 'adr' pseudo-op, but with the BSYM() mechanics integrated into it. This ensures that the BSYM()-ification is only used in conjunction with 'adr'. Acked-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* / ARM: 8373/1: disable branch profiling in uncompressorArnd Bergmann2015-05-281-0/+2
|/ | | | | | | | | | The branch profiling code cannot work outside of the main kernel and just causes link errors if we try to use it in the decompressor. Disabling it here matches what we do for other architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds2015-04-226-688/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code changes from Olof Johansson: "The changes here belong to two main platforms: - Atmel At91 is flipping the bit and going multiplatform. This includes some cleanups and removal of code, and the final flip of config dependencies - Shmobile has several platforms that are going multiplatform, but this branch also contains a bunch of cleanups that they weren't able to keep separate in a good way. THere's also a removal of one of their SoCs and the corresponding boards (sh7372 and mackerel)" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) ARM: at91/pm: move AT91_MEMCTRL_* to pm.h ARM: at91/pm: move the standby functions to pm.c ARM: at91: fix pm_suspend.S compilation when ARMv6 is selected ARM: at91: add a Kconfig dependency on multi-platform ARM: at91: drop AT91_TIMER_HZ ARM: at91: remove hardware.h ARM: at91: remove SoC headers ARM: at91: remove useless mach/cpu.h ARM: at91: remove unused headers ARM: at91: switch at91_dt_defconfig to multiplatform ARM: at91: switch to multiplatform ARM: shmobile: r8a7778: enable multiplatform target ARM: shmobile: bockw: add sound to DT ARM: shmobile: r8a7778: add sound to DT ARM: shmobile: bockw: add devices hooked up to i2c0 to DT DT: i2c: add trivial binding for OKI ML86V7667 video decoder ARM: shmobile: r8a7778: common clock framework CPG driver ARM: shmobile: bockw dts: set extal clock frequency ARM: shmobile: bockw dts: Move Ethernet node to BSC ARM: shmobile: r8a73a4: Remove legacy code ...
| * ARM: shmobile: sh7372: Remove ZBOOT MMC/SDHI supportMagnus Damm2015-02-236-688/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the sh7372 implementation and the shared ZBOOT MMC and SDHI support code from the compressed ARM boot loader. With this in place it is no longer possible to boot any self-contained kernel for sh7372 directly from Mask ROM via SDHI and MMCIF hardware. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* | ARM: 8327/1: zImage: add support for ARMv7-MJoachim Eastwood2015-03-281-6/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes it possible to enter zImage in Thumb mode for ARMv7-M (Cortex-M) CPUs that do not support ARM mode. The kernel entry is also made in Thumb mode. [ukl: fix spelling in commit log, return early in call_cache_fn] Signed-off-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Stefan Agner <stefan@agner.ch> Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: add documentation for finding start of physical memoryRussell King2015-03-271-1/+18
|/ | | | | | | | Occasionally, there's a question about the method we use to find the start of physical memory. Add some documentation so we don't have to keep repeating outselves on the mailing list. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
*-. Merge branches 'debug', 'fixes', 'l2c' (early part), 'misc' and 'sa1100' ↵Russell King2015-02-101-10/+31
|\ \ | | | | | | | | | into for-next
| | * ARM: 8290/1: decompressor: fix a wrong commentMasahiro Yamada2015-01-211-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | This comment does not correspond to the actual code. When zImage is loaded at a lower *OR* higher address of the destination of Image, it won't overwrite itself. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB sizeNicolas Pitre2015-01-291-9/+30
|/ | | | | | | | | | | | | | | | | | | | | There is currently a hardcoded limit of 64KB for the DTB to live in and be extended with ATAG info. Some DTBs have outgrown that limit: $ du -b arch/arm/boot/dts/omap3-n900.dtb 70212 arch/arm/boot/dts/omap3-n900.dtb Furthermore, the actual size passed to atags_to_fdt() included the stack size which is obviously wrong. The initial DTB size is known, so use it to size the allocated workspace with a 50% growth assumption and relocate the temporary stack above that. This is also clamped to 32KB min / 1MB max for robustness against bad DTB data. Reported-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 8191/1: decompressor: ensure I-side picks up relocated codeWill Deacon2014-11-141-4/+16
| | | | | | | | | | | | | | | | | | | | | | | To speed up decompression, the decompressor sets up a flat, cacheable mapping of memory. However, when there is insufficient space to hold the page tables for this mapping, we don't bother to enable the caches and subsequently skip all the cache maintenance hooks. Skipping the cache maintenance before jumping to the relocated code allows the processor to predict the branch and populate the I-cache with stale data before the relocation loop has completed (since a bootloader may have SCTLR.I set, which permits normal, cacheable instruction fetches regardless of SCTLR.M). This patch moves the cache maintenance check into the maintenance routines themselves, allowing the v6/v7 versions to invalidate the I-cache regardless of the MMU state. Cc: <stable@vger.kernel.org> Reported-by: Marc Carino <marc.ceeeee@gmail.com> Tested-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 8153/1: Enable gcov support on the ARM architectureVincent Sanders2014-09-261-0/+2
| | | | | | | | | | | | | | | | | | | | Enable gcov support for ARM based on original patches by David Singleton and George G. Davis Riku - updated to patch to current mainline kernel. The patch has been submitted in 2010, 2012 - for symmetry, now in 2014 too. https://lwn.net/Articles/390419/ http://marc.info/?l=linux-arm-kernel&m=133823081813044 v2: remove arch/arm/kernel from gcov disabled files Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Vincent Sanders <vincent.sanders@collabora.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 8079/1: zImage: identify kernel endiannessNicolas Pitre2014-07-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | With patch #8067/1 ("zImage: ensure header in LE format for BE8 kernels") applied, it is no longer possible to determine the endianness of a compiled kernel image. This normally shouldn't matter to the boot environment, except for those cases where the selection of a ramdisk or root filesystem with a matching endianness has to be automated. Let's add a flag to the zImage header indicating the actual endianness. Four bytes from offset 0x30 can be interpreted as follows: 04 03 02 01 big endian kernel 01 02 03 04 little endian kernel Anything else should be interpreted as "unknown", in which case it is most likely that patch #8067/1 was not applied either and the zImage magic number at offset 0x24 could be used instead to determine endianness. No zImage before this patch ever produced 0x01020304 nor 0x04030201 at offset 0x30 so there is no confusion possible. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: simplify generation of compressed vmlinux.lds fileRussell King2014-07-013-9/+2
| | | | | | | | | | As we are now using the C preprocessor, we do not need to use sed to edit constants in this file, and then pass the resulting file through the C preprocessor. Instead, rely solely on the C preprocessor to rewrite TEXT_START and BSS_ADDR. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 8067/1: zImage: ensure header in LE format for BE8 kernelsNicolas Pitre2014-07-014-5/+21
| | | | | | | | | | | | | | All known BE8-capable systems have LE bootloaders, so we need to ensure that the magic number and image start/end values are in little endian format. [ben.dooks@codethink.co.uk: from nico's original email on this subject] [taras.kondratiuk@linaro.org: removed lds.S->lds rule, added target to extra-y] Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into nextLinus Torvalds2014-06-061-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: - Major clean-up of the L2 cache support code. The existing mess was becoming rather unmaintainable through all the additions that others have done over time. This turns it into a much nicer structure, and implements a few performance improvements as well. - Clean up some of the CP15 control register tweaks for alignment support, moving some code and data into alignment.c - DMA properties for ARM, from Santosh and reviewed by DT people. This adds DT properties to specify bus translations we can't discover automatically, and to indicate whether devices are coherent. - Hibernation support for ARM - Make ftrace work with read-only text in modules - add suspend support for PJ4B CPUs - rework interrupt masking for undefined instruction handling, which allows us to enable interrupts earlier in the handling of these exceptions. - support for big endian page tables - fix stacktrace support to exclude stacktrace functions from the trace, and add save_stack_trace_regs() implementation so that kprobes can record stack traces. - Add support for the Cortex-A17 CPU. - Remove last vestiges of ARM710 support. - Removal of ARM "meminfo" structure, finally converting us solely to memblock to handle the early memory initialisation. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits) ARM: ensure C page table setup code follows assembly code (part II) ARM: ensure C page table setup code follows assembly code ARM: consolidate last remaining open-coded alignment trap enable ARM: remove global cr_no_alignment ARM: remove CPU_CP15 conditional from alignment.c ARM: remove unused adjust_cr() function ARM: move "noalign" command line option to alignment.c ARM: provide common method to clear bits in CPU control register ARM: 8025/1: Get rid of meminfo ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type ARM: 8066/1: correction for ARM patch 8031/2 ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation ARM: 8065/1: remove last use of CONFIG_CPU_ARM710 ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction ARM: 8047/1: rwsem: use asm-generic rwsem implementation ARM: l2c: trial at enabling some Cortex-A9 optimisations ARM: l2c: add warnings for stuff modifying aux_ctrl register values ARM: l2c: print a warning with L2C-310 caches if the cache size is modified ARM: l2c: remove old .set_debug method ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this ...
| * ARM: 8025/1: Get rid of meminfoLaura Abbott2014-06-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | memblock is now fully integrated into the kernel and is the prefered method for tracking memory. Rather than reinvent the wheel with meminfo, migrate to using memblock directly instead of meminfo as an intermediate. Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: compressed/head.S: remove s3c24xx special caseHeiko Stuebner2014-05-251-5/+0
|/ | | | | | | | | addruart from the generic debug macro is doing exactly the same using the common lowlevel uart definition, so there is no cause for this special casing for s3c24xx. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: 7992/1: boot: compressed: ignore bswapsdi2.SMark Rutland2014-03-071-0/+1
| | | | | | | | | | | | | | | | Commit 017f161a55b4 (ARM: 7877/1: use built-in byte swap function) added bswapsdi2.{o,S} to arch/arm/boot/compressed/Makefile, but didn't update the .gitignore. Thus after a a build git status shows bswapsdi2.S as a new file, which is a little annoying. This patch updates arch/arm/boot/compressed/.gitignore to ignore bswapsdi2.S, as we already do for ashldi3.S and others. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Kim Phillips <kim.phillips@freescale.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge tag 'soc-for-linus' of ↵Linus Torvalds2014-01-241-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
| * ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACYLaurent Pinchart2013-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SH-Mobile platforms are transitioning from non-multiplatform to multiplatform kernel. A new ARCH_SHMOBILE_MULTI configuration symbol has been created to group all multiplatform-enabled SH-Mobile SoCs. The existing ARCH_SHMOBILE configuration symbol groups SoCs that haven't been converted yet. This arrangement works fine for the arch/ code, but lots of drivers needed on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI depend on ARCH_SHMOBILE only. In order to avoid changing them, rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY, and create a new boolean ARCH_SHMOBILE configuration symbol that is selected by both ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* | Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2014-01-241-4/+11
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: "In this set, we have: - Refactoring of some of the old StrongARM-1100 GPIO code to make things simpler by Dmitry Eremin-Solenikov - Read-only and non-executable support for modules on ARM from Laura Abbot - Removal of unnecessary set_drvdata() calls in AMBA code - Some non-executable support for kernel lowmem mappings at the 1MB section granularity, and dumping of kernel page tables via debugfs - Some improvements for the timer/clock code on Footbridge platforms, and cleanup some of the LED code there - Fix fls/ffs() signatures to match x86 to prevent build warnings, particularly where these are used with min/max() macros - Avoid using the bootmem allocator on ARM (patches from Santosh Shilimkar) - Various asid/unaligned access updates from Will Deacon" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (51 commits) ARM: SMP implementations are not supposed to return from smp_ops.cpu_die() ARM: ignore memory below PHYS_OFFSET Fix select-induced Kconfig warning for ZBOOT_ROM ARM: fix ffs/fls implementations to match x86 ARM: 7935/1: sa1100: collie: add gpio-keys configuration ARM: 7932/1: bcm: Add DEBUG_LL console support ARM: 7929/1: Remove duplicate SCHED_HRTICK config option ARM: 7928/1: kconfig: select HAVE_EFFICIENT_UNALIGNED_ACCESS for CPUv6+ && MMU ARM: 7927/1: dcache: select DCACHE_WORD_ACCESS for big-endian CPUs ARM: 7926/1: mm: flesh out and fix the comments in the ASID allocator ARM: 7925/1: mm: keep track of last ASID allocation to improve bitmap searching ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE ARM: PCI: add legacy IDE IRQ implementation ARM: footbridge: cleanup LEDs code ARM: pgd allocation: retry on failure ARM: footbridge: add one-shot mode for DC21285 timer ARM: footbridge: add sched_clock implementation ARM: 7922/1: l2x0: add Marvell Tauros3 support ARM: 7877/1: use built-in byte swap function ARM: 7921/1: mcpm: remove redundant dsb instructions prior to sev ...
| * | ARM: 7877/1: use built-in byte swap functionKim Phillips2013-12-291-4/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the compiler intrinsic for byte swapping on arch ARM. This allows the compiler to detect and be able to optimize out byte swappings, and has a very modest benefit on vmlinux size (Linaro gcc 4.8): text data bss dec hex filename 2840310 123932 61960 3026202 2e2d1a vmlinux-lart #orig 2840152 123932 61960 3026044 2e2c7c vmlinux-lart #builtin-bswap 6473120 314840 5616016 12403976 bd4508 vmlinux-mxs #orig 6472586 314848 5616016 12403450 bd42fa vmlinux-mxs #builtin-bswap 7419872 318372 379556 8117800 7bde28 vmlinux-imx_v6_v7 #orig 7419170 318364 379556 8117090 7bdb62 vmlinux-imx_v6_v7 #builtin-bswap Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* / stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONGKees Cook2013-12-201-0/+14
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes the stack protector config option into a choice of "None", "Regular", and "Strong": CONFIG_CC_STACKPROTECTOR_NONE CONFIG_CC_STACKPROTECTOR_REGULAR CONFIG_CC_STACKPROTECTOR_STRONG "Regular" means the old CONFIG_CC_STACKPROTECTOR=y option. "Strong" is a new mode introduced by this patch. With "Strong" the kernel is built with -fstack-protector-strong (available in gcc 4.9 and later). This option increases the coverage of the stack protector without the heavy performance hit of -fstack-protector-all. For reference, the stack protector options available in gcc are: -fstack-protector-all: Adds the stack-canary saving prefix and stack-canary checking suffix to _all_ function entry and exit. Results in substantial use of stack space for saving the canary for deep stack users (e.g. historically xfs), and measurable (though shockingly still low) performance hit due to all the saving/checking. Really not suitable for sane systems, and was entirely removed as an option from the kernel many years ago. -fstack-protector: Adds the canary save/check to functions that define an 8 (--param=ssp-buffer-size=N, N=8 by default) or more byte local char array. Traditionally, stack overflows happened with string-based manipulations, so this was a way to find those functions. Very few total functions actually get the canary; no measurable performance or size overhead. -fstack-protector-strong Adds the canary for a wider set of functions, since it's not just those with strings that have ultimately been vulnerable to stack-busting. With this superset, more functions end up with a canary, but it still remains small compared to all functions with only a small change in performance. Based on the original design document, a function gets the canary when it contains any of: - local variable's address used as part of the right hand side of an assignment or function argument - local variable is an array (or union containing an array), regardless of array type or length - uses register local variables https://docs.google.com/a/google.com/document/d/1xXBH6rRZue4f296vGt9YQcuLVQHeE516stHwt8M9xyU Find below a comparison of "size" and "objdump" output when built with gcc-4.9 in three configurations: - defconfig 11430641 kernel text size 36110 function bodies - defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR 11468490 kernel text size (+0.33%) 1015 of 36110 functions are stack-protected (2.81%) - defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch 11692790 kernel text size (+2.24%) 7401 of 36110 functions are stack-protected (20.5%) With -strong, ARM's compressed boot code now triggers stack protection, so a static guard was added. Since this is only used during decompression and was never used before, the exposure here is very small. Once it switches to the full kernel, the stack guard is back to normal. Chrome OS has been using -fstack-protector-strong for its kernel builds for the last 8 months with no problems. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-arch@vger.kernel.org Link: http://lkml.kernel.org/r/1387481759-14535-3-git-send-email-keescook@chromium.org [ Improved the changelog and descriptions some more. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2013-11-141-6/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
| * ARM: set BE8 if LE in head codeBen Dooks2013-10-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we are booting in LE and compiled for BE8, then add code to set the state to bE8. Since the instruction stream is always LE, we do not need to do anything special to the instruction. Also ensure that the secondary processors are started in the same mode. Note, we do add about 20 bytes to the kernel image, but it seems easier to do this than adding another configuration to change. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
| * ARM: asm: Add ARM_BE8() assembly helperBen Dooks2013-10-191-6/+2
| | | | | | | | | | | | | | | | | | | | Add ARM_BE8() helper to wrap any code conditional on being compile when CONFIG_ARM_ENDIAN_BE8 is selected and convert existing places where this is to use it. Acked-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
* | ARM: delete mach-sharkLinus Walleij2013-09-173-404/+0
|/ | | | | | | | | | | | | | | | | | | | | The Shark machine sub-architecture (also known as DNARD, the DIGITAL Network Appliance Reference Design) lacks a maintainer able to apply and test patches to modernize the architecture. It is suspected that the current kernel, while it compiles, does not even boot on this machine. The listed maintainer has expressed that he will not be able to spend any time on the maintenance for the coming year. So let's delete it from the kernel for now. It can always be resurrected with git revert if maintenance is resumed. As the VIA82c505 PCI adapter was only used by this architecture, that gets deleted too. Cc: arm@kernel.org Cc: Alexander Schulz <alex@shark-linux.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: shmobile: Update romImage to relocate appended DTBMagnus Damm2013-07-171-4/+39
| | | | | | | | | | | | | | | | | Instead of relying of MACH_TYPE for board identification, update the romImage code to relocate an appended DTB to the beginning of RAM. This implementation is independent of ARM_APPENDED_DTB, this because it is necessary to copy the DTB to memory so the kernel can access it. Without this patch Mackerel does not boot via the Mask ROM over USB (r_usb_boot) - this since non-DT boot was broken ages ago in commit: 0ce53cd ARM: mach-shmobile: Use DT_MACHINE for mackerel Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* arm: add support for LZ4-compressed kernelKyungsik Lee2013-07-094-1/+13
| | | | | | | | | | | | | | | Integrates the LZ4 decompression code to the arm pre-boot code. Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Cc: Yann Collet <yann.collet.73@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'exotic-arch-fixes' of ↵Linus Torvalds2013-07-031-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull "exotic" arch fixes from Geert Uytterhoeven: "This is a collection of several exotic architecture fixes, and a few other fixes for issues that were detected while doing the former" * 'exotic-arch-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (35 commits) lib: Move fonts from drivers/video/console/ to lib/fonts/ console/font: Refactor font support code selection logic Revert "staging/solo6x10: depend on CONFIG_FONTS" input: cros_ec_keyb_clear_keyboard() depends on CONFIG_PM_SLEEP score: Wire up asm-generic/xor.h score: Remove unneeded <asm/dma-mapping.h> openrisc: Wire up asm-generic/xor.h h8300/boot: Use POSIX "$((..))" instead of bashism "$[...]" h8300: Mark H83002 and H83048 CPU support broken h8300: Switch h8300 to drivers/Kconfig h8300: Limit timer channel ranges in Kconfig h8300: Wire up asm-generic/xor.h h8300: Fill the system call table using a CALL() macro h8300: Fix <asm/tlb.h> h8300: Hardcode symbol prefixes in asm sources h8300: add missing definition for read_barries_depends() frv: head.S - Remove commented-out initialization code cris: Wire up asm-generic/vga.h parport: disable PC-style parallel port support on cris console: Disable VGA text console support on cris ...