summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/am335x-bone-common.dtsi (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: Move .dts files to vendor sub-directoriesRob Herring2023-06-211-411/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
* ARM: dts: Unify pinctrl-single pin group nodes for am33xxTony Lindgren2023-05-231-11/+11
| | | | | | | | | | | We want to unify the pinctrl-single pin group nodes to use naming "pins". Otherwise non-standad pin group names will add make dtbs checks errors when the pinctrl-single yaml binding gets merged. Cc: Conor Dooley <conor+dt@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am33xx: Add i2c voltage scaling firmware to wkup_m3_ipcDave Gerlach2022-05-031-0/+4
| | | | | | | | | | Add appropriate firmware-name property for all am33xx platforms. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [dfustini: change property from 'ti,scale-data-fw' to 'firmware-name'] Signed-off-by: Drew Fustini <dfustini@baylibre.com> Message-Id: <20220502021508.1342869-3-dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-boneblack-common: move system-power-controllerDrew Fustini2021-12-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the rtc node system-power-controller property from am335x-boneblack-common.dtsi to am335x-bone-common.dtsi. am335x-boneblack-common.dtsi is included by am335x-boneblack.dts, am335x-boneblack-wireless.dts, am335x-sancloud-bbe.dts and am335x-sancloud-bbe-lite.dts. All of these dts files also include am335x-bone-common.dtsi and thus will retain the rtc node system-power-controller property. am335x-bone-common.dtsi is also included by am335x-bone.dts [1], am335x-bonegreen.dts [2] and am335x-bonegreen-wireless.dts [3]. These boards will now have the rtc node system-power-controller property too. This is valid as they also have PMIC_POWR_EN (ZCZ C6) connected to PWR_EN on the TPS65217B PMIC. Based on commit 15c7be47fb7c ("ARM: dts: am335x: Add rtc node as system-power-controller") by Keerthy in ti-linux-5.4.y branch [4]. [1] https://beagleboard.org/static/beaglebone/BEAGLEBONE_SCHEM_A3.pdf [2] https://github.com/SeeedDocument/BeagleBone_Green/blob/master/resources/BEAGLEBONE_GREEN_V1.pdf [3] https://github.com/SeeedDocument/BeagleBone_Green_Wireless/blob/master/resources/BeagleBone_Green%20Wireless_V1.0_SCH_20160314.pdf [4] git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git Cc: Jason Kridner <jkridner@beagleboard.org> Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/linux-omap/20211012191311.879838-1-dfustini@baylibre.com/ Suggested-by: Johan Hovold <johan@kernel.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone: switch to new cpsw switch drvGrygorii Strashko2021-08-061-5/+8
| | | | | | | | | | | | | | | | The dual_mac mode has been preserved the same way between legacy and new driver, and one port devices works the same as 1 dual_mac port - it's safe to switch drivers. So, Switch BeagleBone boards to use new cpsw switch driver. Those boards have or 2 Ext. port wired and configured in dual_mac mode by default, or only 1 Ext. port. For am335x-sancloud-bbe-common.dtsi also removed duplicated davinci_mdio DT nodes which already defined in am335x-bone-common.dtsi. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone-common: Enable PRU-ICSS nodeSuman Anna2021-08-031-0/+4
| | | | | | | | | | | | | | | | The PRU-ICSS target module node was left in disabled state in the base am33xx-l4.dtsi file. Enable this node on all the AM335x beaglebone boards as they mostly use a AM3358 or a AM3359 SoC which do contain the PRU-ICSS IP. The PRUSS node and most of its child nodes are already enabled in the base dts file, and so become effective automatically with the enabling of this PRU-ICSS target-module node. The corresponding PRU nodes can be disabled later on if there are no use-cases defined to use a particular PRU core or the whole PRU-ICSS subsystem itself if both its PRU cores are unused. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Replace HTTP links with HTTPS ones: OMAP DEVICE TREE SUPPORTAlexander A. Klimov2020-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: Drop pointless status changing for am3 musbTony Lindgren2019-10-231-22/+0
| | | | | | | | | | | | The default is enabled, and there should be no need to reconfigure the status for SoC internal devices in the board specific files. Only the USB PHY used needs to be configured in the board specific files. Cc: Bin Liu <b-liu@ti.com> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-191-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: dts: am335x: bone-common: Replaced register offsets with definesChristina Quast2019-04-081-58/+58
| | | | | | | The defines are taken from dt-bindings/pinctrl/am33xx.h Signed-off-by: Christina Quast <cquast@hanoverdisplays.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am33xx: convert to use new clkctrl layoutTero Kristo2018-10-181-1/+1
| | | | | | | | | Convert AM33xx to use the new clockdomain based layout. Previously the clkctrl split was based on CM instance boundaries. The new layout helps with introducing the interconnect driver instances. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone-common: get rid of phy_id propertyGrygorii Strashko2018-09-201-1/+5
| | | | | | | The phy_id property is deprecated and phy-handle has to be used instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone-common: Fix mmc0 Write ProtectRobert Nelson2018-07-031-1/+0
| | | | | | | | | | | | | | | | Mainline Commit b74c2b21e1551018af53ee6c1efc051dfce2d788 added the pinmux settings for mmc1, however this pin (0x9a0) is routed to P9_42 on the cape header. Thus any BeagleBone cape that utilizes P9_42 triggers mmc0's Write Protect. Fixes: b74c2b21e155 ("ARM: dts: am33xx: Add pinmux data for mmc1 in am335x-evm, evmsk and beaglebone") Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Faiz Abbas <faiz_abbas@ti.com> CC: Tony Lindgren <tony@atomide.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am33xx: Add pinmux data for mmc1 in am335x-evm, evmsk and beagleboneFaiz Abbas2018-05-011-1/+8
| | | | | | | | | am335x-evm, am335x-evmsk and am335x-beaglebone are currently relying on pinmux set by the bootloader to set the correct value for mmc1. Fix this by adding pinmux data for the same in kernel. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am33xx: add clkctrl nodesTero Kristo2017-12-111-1/+1
| | | | | | | | | | | | Add clkctrl nodes for AM33xx SoC. These are going to be acting as replacement for part of the existing clock data and the existing clkctrl hooks under hwmod data. This patch also removes any obsolete clock nodes, and reroutes all users for these to use the new clkctrl clocks instead. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: tps65217: Add power button interrupt to the common tps65217.dtsi fileEnric Balletbo i Serra2017-08-101-1/+0
| | | | | | | | | | The interrupt for power button is static data that comes from the datasheet, there is no reason to need to define this value on every board so seams reasonable put this information into the common tps65217 file. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: tps65217: Add charger interrupts to the common tps65217.dtsi fileEnric Balletbo i Serra2017-08-101-2/+0
| | | | | | | | | | The interrupt specifiers for USB and AC charger input are static data that comes from the datasheet, there is no reason to need to define these values on every board so seem reasonable put this information into the common tps65217 file. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: omap: Add generic compatible string for I2C EEPROMJavier Martinez Canillas2017-05-261-5/+5
| | | | | | | | | | | | | | | | The at24 driver allows to register I2C EEPROM chips using different vendor and devices, but the I2C subsystem does not take the vendor into account when matching using the I2C table since it only has device entries. But when matching using an OF table, both the vendor and device has to be taken into account so the driver defines only a set of compatible strings using the "atmel" vendor as a generic fallback for compatible I2C devices. So add this generic fallback to the device node compatible string to make the device to match the driver using the OF device ID table. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'omap-for-v4.11/dt-signed-v2' of ↵Olof Johansson2017-01-301-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Device tree changes for omaps for v4.11 merge window. These changes add earlycon stdout-path propety for the SoCs so far tested with it. The other changes are addition of BeagleBone green and making WLAN work on BeagleBone black wireless and green wireless. The rest of the changes are the usual enabling features on various devices: - Enable devices on am335x-sl50 - Changes to dra7-evm boards to enable enable irqs for dp83867 eth phys, add pinmux configuration for mmc, remov erratum i869 pinmux configurations, disable NAND support because of pin conflict, add pcf8575 used for lcd - Remove NAND partition table for omap3-igep - Configure USB Ethernet MAC from device tree for beagleboard xm, pandaboard, omap5-uevm and igepv5 - Configure am335x-chilisom to wake from RTC-only state - Update Nanobone for external FRAM chip - Clean up n900 dts - Update am335x-phycore and am335x-wega for various devices - Changes for am57xx-beagle-x15 to implement rgmii2 errata * tag 'omap-for-v4.11/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (35 commits) ARM: dts: dra72/1-evm: add pcf8575 used for lcd ARM: dts: dra7xx: Add stdout-path property ARM: dts: am57xx: Add stdout-path property ARM: dts: am43xx: Add stdout-path property ARM: dts: am33xx: Add stdout-path property ARM: dts: am335x-sl50: Enable the Ambient Light Sensor. ARM: dts: am335x-sl50: Enable the MCP23017 GPIO Expander. ARM: dts: am335x-sl50: Enable BQ32000 Real Time Clock. ARM: dts: am335x-sl50: Enable SPI0 interface and Flash Memory. ARM: dts: am335x-sl50: Enable UART1. ARM: dts: am335x-sl50: Remove I2C1 node. ARM: dts: omap3-igep: Remove NAND partition table ARM: dts: am57xx-beagle-x15: implement errata "Ethernet RGMII2 Limited to 10/100 Mbps" ARM: dts: am335x-phycore-som: Remove partition tables ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys ARM: dts: Configure BeagleBone peripheral USB VBUS irq ARM: dts: omap5-igep0050: Allow bootloader to configure USB Ethernet MAC ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC ARM: dts: pandaboard: Allow bootloader to configure USB Ethernet MAC ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree ... Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: dts: Configure BeagleBone peripheral USB VBUS irqTony Lindgren2017-01-121-0/+2
| | | | | | | | | | | | This prevents having to poll peripheral USB port cable status. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | dt-bindings: mfd: Remove TPS65217 interruptsMilo Kim2016-12-271-5/+3
| | | | | | | | | | | | | | | | | | Interrupt numbers are from the datasheet, so no need to keep them in the ABI. Use the number in the DT file. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: am335x: Fix the interrupt name of TPS65217Milo Kim2016-12-271-1/+1
|/ | | | | | | | Use 'interrupt-names' for getting the charger interrupt number. Fixes: 1934e89a769b ("ARM: dts: am335x: Add the charger interrupt") Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: AM335X-bone-common: Add the internal and external clock nodes for rtcKeerthy2016-11-091-0/+5
| | | | | | | | | rtc can either be supplied from internal 32k clock or external crystal generated 32k clock. Internal clock is SoC specific and the external clock is board dependent. Assigning the corresponding clocks. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x: Add the power button interruptMilo Kim2016-11-091-0/+5
| | | | | | | | This enables the power button driver gets corresponding IRQ number by using platform_get_irq(). Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x: Add the charger interruptMilo Kim2016-11-091-0/+8
| | | | | | | | This enables the charger driver gets corresponding IRQ number by using platform_get_irq_byname() helper. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x: Support the PMIC interruptMilo Kim2016-11-091-0/+4
| | | | | | | | | AM335x bone based boards have the PMIC interrupt named NMI which is connected to TPS65217 device. AM335x main interrupt controller provides it and the number is 7. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x: Add missing unit name to memory nodesJavier Martinez Canillas2016-08-311-1/+1
| | | | | | | | | This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x/437x/57xx: remove unneeded unit name for gpio-leds nodesJavier Martinez Canillas2016-08-151-4/+4
| | | | | | | | | This patch fixes the following DTC warnings for many boards: "Node /leds/led@1 has a unit name, but no reg property" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x/am437x: remove unneeded unit name for fixed regulatorsJavier Martinez Canillas2016-08-151-1/+1
| | | | | | | | | This patch fixes the following DTC warnings for many boards: "Node /fixedregulator@0 has a unit name, but no reg property" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone-common: use stdout-path in Beaglebone boards.Enric Balletbo i Serra2016-06-211-0/+4
| | | | | | | | This commit adds the stdout-path propety in /chosen for all Beaglebone boards. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone-common: Mark MAC as having only one PHYAndrew F. Davis2016-06-101-5/+1
| | | | | | | | | | | Currently am33xx.dtsi declares the MAC controller to have two slave ports, on these boards we only use one, so set the slave count to one. This eliminates a console error message when the non-existent PHY is not detected. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x: Update MPU regulator range for TI boardsDave Gerlach2016-06-101-1/+1
| | | | | | | | | | | Now that we are moving to OPPv2 bindings and able to add 1GHz OPP for MPU, let's update the max MPU voltage range to align with the maximum possible value allowed in the operating-points table, which is max target voltage of 132500 uV + 2%. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Revert "regulator: tps65217: remove tps65217.dtsi file"Peter Ujfalusi2016-02-191-11/+3
| | | | | | | | | | | | | | | | This reverts commit 8e6ebfaa9b384088002baa10f7534efa73a0794e. Without the patch reverted regulators will not work. This prevents MMC to be working for example so the boards can not boot to MMC rootfs. Tested it on beaglebone white and bisect also points to the reverted commit. The issue can be also fixed by adding "regulator-compatible =" to all board dts file for the regulators. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* regulator: tps65217: remove tps65217.dtsi fileHeiko Schocher2015-11-301-3/+11
| | | | | | | | | | | remove tps65217.dtsi and adapt all boards, which used it. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Keerthy <j-keerthy@ti.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone-common: Use AM33XX_IOPAD pinmux macroJavier Martinez Canillas2015-11-301-52/+52
| | | | | | | | | | Use the pinmux IOPAD macro to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt ↵Mugunthan V N2015-10-131-2/+1
| | | | | | | | | | | | | | | binding docs As per mmc device tree binding documentation card detect gpio has to be active low signal. When a hardware is designed with active high card detect, gpio polarity has to be changed with cd-inverted dt property. In AM335x the card detect gpio is designed as active low gpio. So correcting the dt card detect gpio definition. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2015-06-261-0/+66
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Kevin Hilman: "As usual, quite a few device-tree updates in ARM land. There was one minor churn in DTs due to relicensing under a dual-license, and lots of little additions of new peripherals, features etc, but nothing really exciting to call to your attention. Some higlights, focsuing on support for new SoCs and boards: - AT91: new boards: Overkiz, Acme Systems' Arietta G25 - tegra: HDA support - bcm: new platforms: Buffalo WXR-1900DHP, SmartRG SR400ac, ASUS RT-AC87U - mvebu: new platforms: Compulab CM-A510, Armada 385-based Linksys boards, DLink DNS-327L - OMAP: new platforms: Baltos IR5221, LogicPD Torpedo, Toby-Churchill SL50 - ARM: added support for Juno r1 board - sunxi: A33 SoC support; new boards: A23 EVB, SinA33, GA10H-A33, Mele A1000G - imx: i.MX7D SoC support; new boards: Armadeus Systems APF6, Gateworks GW5510, and aristainetos2 boards - hisilicon: hi6220 SoC support; new boards: 96boards hikey" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (462 commits) ARM: hisi: revert changes from hisi/hip04-dt branch ARM: nomadik: set proper compatible for accelerometer ARM64: juno: add GPIO keys ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodes ARM: dts: Introduce STM32F429 MCU ARM: socfpga: dts: enable ethernet for Arria10 devkit ARM: dts: k2l: fix the netcp range size ARM: dts: k2e: fix the netcp range size ARM: dts: k2hk: fix the netcp range size ARM: dts: k2l-evm: Add device bindings for netcp driver ARM: dts: k2e-evm: Add device bindings for netcp driver ARM: dts: k2hk-evm: Add device bindings for netcp driver ARM: BCM5301X: Add DT for Asus RT-AC87U ARM: BCM5301X: add IRQ numbers for PCIe controller ARM: BCM5301X: add NAND flash chip description arm64: dts: Add dts files for Hisilicon Hi6220 SoC clk: hi6220: Document devicetree bindings for hi6220 clock arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC ARM: at91/dt: sama5d4ek: mci0 uses slot 0 ARM: at91/dt: kizbox: fix mismatch LED PWM device ...
| * ARM: dts: Beaglebone i2c definitionsPantelis Antoniou2015-05-201-0/+66
| | | | | | | | | | | | | | | | | | The beaglebone family of boards contain two I2C busses enabled. The first one with a baseboard identification EEPROM and a cape I2C bus. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damageMatthijs van Duin2015-06-011-0/+19
|/ | | | | | | | | | | | | | | | | | | | | Avoid entering "RTC-only mode" at poweroff. It is unsupported by most versions of BeagleBone, and risks hardware damage. The damaging configuration is having system-power-controller without ti,pmic-shutdown-controller. Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com> Tested-by: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Johan Hovold <johan@kernel.org> [Matthijs van Duin: added explanatory comments] Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com> Fixes: http://bugs.elinux.org/issues/143 Cc: stable@vger.kernel.org # v3.12+ [tony@atomide.com: updated comments with the hardware breaking info] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone-common: enable aes and shamMatt Porter2015-03-061-0/+8
| | | | | | | | | | | | Beaglebone Black doesn't have AES and SHAM enabled like the original Beaglebone White dts. This breaks applications that leverage the crypto blocks so fix this by enabling these nodes in the am335x-bone-common.dtsi. With this change, enabling the nodes in am335x-bone.dts is no longer required so remove them. Signed-off-by: Matt Porter <mporter@konsulko.com> Acked-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone*: usb0 is hardwired for peripheralRobert Nelson2015-02-241-0/+1
| | | | | | | | | | | Fixes: http://bugs.elinux.org/issues/127 the bb.org community was seeing random reboots before this change. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'dt-for-linus' of ↵Linus Torvalds2014-10-081-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Arnd Bergmann: "As usual, this is the largest branch, though this time a little under half of the total changes with 307 individual non-merge changesets. The largest changes are the addition of new machines, in particular the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support for the old i.MX1 platform. Other changes include - at91: various sam9 and sama5 updates - exynos: much extended Peach Pi/Pit (Chromebook 2) support - keystone: new peripherals - meson: added DT for meson6 SoC - mvebu: new device support for Armada 370/375 - qcom: improved support for IPQ8064 and MSM8x60 - rockchip: much improved support for rk3288 - shmobile: lots of updates all over the place - sunxi: dts license change - sunxi: more a23 device support - vexpress: CLCD DT description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits) ARM: DTS: meson: update DTSI to add watchdog node ARM: dts: keystone-k2l: fix mdio io start address ARM: dts: keystone-k2e: fix mdio io start address ARM: dts: keystone-k2e: update usb1 node for dma properties ARM: dts: keystone: fix io range for usb_phy0 Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt" Revert "ARM: dts: hix5hd2: add wdg node" ARM: dts: add rk3288 i2s controller ARM: vexpress: Add CLCD Device Tree properties ARM: bcm2835: add I2S pinctrl to device tree ARM: meson: documentation: add bindings documentation ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS ARM: dts: mt6589: Change compatible string for GIC ARM: dts: mediatek: Add compatible property for aquaris5 ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk ARM: dts: mt6589: Fix typo in GIC unit address ARM: dts: Build dtb for Mediatek board ARM: dts: keystone: fix bindings for pcie and usb clock nodes ARM: dts: keystone: k2l: Fix chip selects for SPI devices ARM: dts: keystone: add dsp gpio controllers nodes ...
| * ARM: dts: am335x-boneblack: Add names for remaining regulatorsMark Brown2014-09-091-0/+5
| | | | | | | | | | | | | | | | | | Add regulator-name properties for the regulators that don't have them, allowing the kernel to display the name from the schematic rather than the name of the regulator on the PMIC in order to improve diagnostics. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: dts: am335x-bone*: Fix model name and update compatibility informationNishanth Menon2014-09-031-3/+0
|/ | | | | | | | | | | | | | | Beaglebone white and beaglebone black differ in tiny little aspects. This is the reason why we maintain seperate dts for these platforms. However, there is no real way to decode from dtb which platform it is since compatible and model name are the same for both platforms. Fix this so that beaglebone black and beaglebone are identifiable, while maintaining compatibility for older zImages which might use old beaglebone compatible flag for black as well. Reported-by: Tom Rini <trini@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: AM33XX: fix ethernet and mdio default stateJohan Hovold2014-05-141-1/+2
| | | | | | | | Make sure ethernet and mdio nodes are disabled by default and enable them explicitly only on boards that actually use them. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone-common: use phandles for USB and DMA refsGuido Martínez2014-05-061-19/+19
| | | | | | | | | Use phandles instead of unit adresses to reference usb and dma nodes. This makes the DT more robust and readable. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x: update USB DT referencesLeigh Brown2014-04-191-2/+2
| | | | | | | | | | | | In "ARM: dts: am33xx: correcting dt node unit address for usb", the usb_ctrl_mod and cppi41dma nodes were updated with the correct register addresses. However, the dts files that reference these nodes were not updated, and those devices are no longer being enabled. This patch corrects the references for the affected dts files. Signed-off-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-bone-common: correct mux mode for cmd lineBalaji T K2013-10-111-1/+1
| | | | | | | | | Set pinmux_emmc_pins mux mode for cmd line to MODE2 in order to detect eMMC on BBB and BBW + eMMC cape. Signed-off-by: Balaji T K <balajitk@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: am335x-boneblack: move fixed regulator to board levelNishanth Menon2013-10-111-7/+7
| | | | | | | | | | | | | | | | 3.3V fixed regulator does not belong to TPS node - as a result the fixed regulator is never probed and MMC is continually deferred due to lack of regulator. Move the fixed regulator to be at root of platform. Cc: Joel Fernandes <joelf@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Tested-by: Balaji T K <balajitk@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: AM33XX: don't redefine OCP bus and device nodesJavier Martinez Canillas2013-10-111-51/+49
| | | | | | | | | | | | | | The On Chip Peripherals (OCP) device node is a simplified representation of the AM33XX SoC interconnect. An OCP dev node is already defined in the am33xx.dtsi Device Tree source file included by am33xx based boards so there is no need to redefine this on each board DT file. Also, the OCP and IP modules directly connected to it are SoC internal details that is better to keep outside of board files. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 08:14:40 +0100