summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/exynos4412-odroid-common.dtsi (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: exynos: Add support for audio over HDMI for Odroid X/X2/U3Sylwester Nawrocki2018-05-151-13/+20
| | | | | | | | | This patch switches Odroid X/X2/U3 to use dedicated Odroid audio subsystem DT bindings instead of the simple-card in order to add support for audio over HDMI. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Use label instead of full path in exynos4412-odroid-commonMaciej Purski2018-02-131-6/+6
| | | | | | | | Extend camera node by label, not by full path in Exynos 4412 Odroid boards. This avoids error-prone redefinition of nodes. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add SPDX license identifiersKrzysztof Kozlowski2018-01-031-4/+1
| | | | | | Replace GPL v2.0 license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* Merge tag 'samsung-dt-4.15' of ↵Arnd Bergmann2017-10-201-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc Pull "Samsung DTS ARM changes for 4.15" from Krzysztof Kozłowski: 1. Add new board: Hardkernel Odroid HC1. 2. Fix incomplete Odroid-XU3/4 thermal-zones definition leading to possible overheat if first pair of A7+A15 cores is idle but rest of CPUs are busy. 3. Add capacity-dmips-mhz properties for CPUs of octa-core SoCs. 4. Add power button to Odroid XU3/4. 5. Improvements in Gscaler, HDMI and Mixer blocks on Exynos5. 6. Add suspend quirk to DWC3 USB controller to fix enumeration of SuperSpeed devices on Odroid XU4. 7. Add HDMI and MHL to Trats2. 8. Cleanups (redundant properties and nodes). * tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: samsung: Document binding for new Odroid HC1 board ARM: dts: exynos: Add HDMI and Sil9234 to Trats2 board ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board ARM: dts: exynos: Move audio clocks configuration to odroidxu3-audio.dtsi ARM: dts: exynos: Add dwc3 SUSPHY quirk ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodes ARM: dts: exynos: Cleanup HDMI DCC definitions on Exynos5250 and Exynos542x boards ARM: dts: exynos: Move HDMI PHY node from boards to exynos5250.dtsi ARM: dts: exynos: Use specific compatibles for proper Gscaler limits on Exynos5250 and Exynos5420 ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on Odroid boards ARM: dts: exynos: Add power button for Odroid XU3/4 ARM: dts: exynos: Remove the display-timing and delay from Rinato ARM: dts: exynos: add exynos5422 cpu capacity-dmips-mhz information ARM: dts: exynos: add exynos5420 cpu capacity-dmips-mhz information ARM: dts: exynos: fix incomplete Odroid-XU3/4 thermal-zones definition
| * ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on ↵Marek Szyprowski2017-09-191-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Odroid boards GPIO keys don't need interrupt property. Interrupt number can be derived directly from the GPIO pin definition, so remove redundant 'interrupts' and 'interrupt-parent' properties from gpio-keys nodes on Exynos4412-based Odroid boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* | arm: dts: fix unit-address leading 0sRob Herring2017-10-201-3/+3
|/ | | | | | | | | | | | | Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: dts: exynos: Remove num-slots from exynos platformsShawn Lin2017-07-181-1/+0
| | | | | | | | | | dwmmc driver deprecated num-slots and plan to get rid of it finally. Just move a step to cleanup it from DT. Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Use human-friendly symbols for interrupt flags in board ↵Krzysztof Kozlowski2017-06-071-3/+3
| | | | | | | | | | sources Replace hard-coded values of interrupt flags with respective macros from header to increase code readability. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Enable watchdog on all Exynos4 boardsKrzysztof Kozlowski2017-03-131-4/+0
| | | | | | | | | Watchdog module does not have external dependencies so it can be safely enabled in exynos4.dtsi thus making it available for all Exynos4-based boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
* ARM: dts: exynos: Add CPU OPPs for Exynos4412 PrimeBartlomiej Zolnierkiewicz2016-12-301-2/+2
| | | | | | | | | | | | | | | | | | | | Add CPU operating points for Exynos4412 Prime (it supports additional 1704MHz & 1600MHz OPPs and 1500MHz OPP is just a regular non-turbo OPP on this SoC). Also update relevant cooling maps to account for new OPPs. ODROID-X2/U2/U3 boards use Exynos4412 Prime SoC version so update their board files accordingly. Based on Hardkernel's kernel for ODROID-X2/U2/U3 boards. Cc: Doug Anderson <dianders@chromium.org> Cc: Andreas Faerber <afaerber@suse.de> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Cc: Ben Gamari <ben@smart-cactus.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Fix initial audio clocks configuration on Exynos4 boardsMarek Szyprowski2016-12-281-10/+10
| | | | | | | | | | | | | Move assigned clocks properties from sound node to audio subsystem clock controller node. This way clocks topology and rates are set just after probing audio clocks controller. Leaving those properties under sound node doesn't guarantee to configure them before they are being used (for example i2s hardware module can be probed in parallel and it also require proper audio clocks configuration). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Correct clocks for Exynos4 I2S moduleMarek Szyprowski2016-12-281-4/+0
| | | | | | | | | | "iis", "i2s_opclk0" and "i2s_opclk1" are standard clocks for Exynos4 I2S hardware module, so they should be defined in .dtsi file not in the random board .dts file. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* Merge tag 'samsung-dt-pinctrl-4.9' of ↵Arnd Bergmann2016-09-191-7/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Topic branch for Samsung DeviceTree cleanup for 4.9" from Krzysztof Kozłowski: Replace in DT sources hard-coded values for pinctrl configuration like pull up/down, drive strength and function. This makes the DTS easier to read, especially that some drive strengths values are quite non-obvious. * tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s3c64xx: Use macros for pinctrl configuration ARM: dts: s3c2416: Use macros for pinctrl configuration ARM: dts: s5pv210: Use macros for pinctrl configuration ARM: dts: s3c64xx: Use common macros for pinctrl configuration ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415 ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210 ARM: dts: exynos: Use macros for pinctrl configuration on exynos542x/exynos5800 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5260 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5250 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4415 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4210 ARM: dts: exynos: Use macros for pinctrl configuration on exynos3250 ARM: dts: exynos: Use common macros for pinctrl configuration pinctrl: dt-bindings: samsung: Update documentation with new macros pinctrl: dt-bindings: samsung: Add header with values used for configuration
| * ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12Krzysztof Kozlowski2016-09-161-7/+7
| | | | | | | | | | | | | | | | | | | | Usage of DTS macros instead of hard-coded numbers makes code easier to read. One does not have to remember which value means pull-up/down or specific driver strength. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* | ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio'Milo Kim2016-08-241-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables getting a HPD GPIO descriptor quicker. The exynos-hdmi driver uses "hpd" for HDMI hot plug detection. static int hdmi_resources_init(struct hdmi_context *hdata) { ... hdata->hpd_gpio = devm_gpiod_get(dev, "hpd", GPIOD_IN); ... } This calls 'of_find_gpio()' and it generates the GPIO consumer ID by referring GPIO suffix. So 'hpd-gpios' is preferred on getting a GPIO descriptor. However, if the device tree uses 'hpd-gpio', then the exynos-hdmi driver always retries to get a GPIO descriptor because the first GPIO suffix is not 'gpio' but 'gpios'. So you always see the debug message below. of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/soc/hdmi@14530000[0]' Use the preferred property, 'hpd-gpios' instead of 'hpd-gpio'. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* Merge tag 'samsung-drivers-exynos-mfc-4.8-2' of ↵Olof Johansson2016-07-061-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Topic branch for Exynos MFC changes for v4.8, part 2: Replace hardcoded reserved memory ranges with auto-allocated ones and enable MFC for all boards. * tag 'samsung-drivers-exynos-mfc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: enable MFC device for all boards ARM: dts: exynos: move MFC reserved memory regions from boards to .dtsi ARM: dts: exynos: replace hardcoded reserved memory ranges with auto-allocated ones ARM: dts: exynos: Enable MFC device on Exynos4412 Odroid boards ARM: dts: exynos: Convert MFC device to generic reserved memory bindings ARM: EXYNOS: Remove code for MFC custom reserved memory handling media: s5p-mfc: add iommu support media: s5p-mfc: replace custom reserved memory handling code with generic one media: s5p-mfc: use generic reserved memory bindings of: reserved_mem: add support for using more than one region for given device media: set proper max seg size for devices on Exynos SoCs media: vb2-dma-contig: add helper for setting dma max seg size s5p-mfc: Fix race between s5p_mfc_probe() and s5p_mfc_open() s5p-mfc: Add release callback for memory region devs s5p-mfc: Set device name for reserved memory region devs Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: dts: exynos: enable MFC device for all boardsMarek Szyprowski2016-06-081-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | MFC device can be used without any external hardware dependencies (when IOMMU is enabled), so it can be enabled by default (like it has been already done for Exynos 542x platforms). This unifies handling of this device for Exynos3250, Exynos4 and Exynos542x platforms. Board can still include exynos-mfc-reserved-memory.dtsi to enable using this device without IOMMU being enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| * ARM: dts: exynos: move MFC reserved memory regions from boards to .dtsiMarek Szyprowski2016-06-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | This patch moves assigning reserved memory regions from each board dts to common exynos-mfc-reserved-memory.dtsi file, where those regions are defined. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| * ARM: dts: exynos: Enable MFC device on Exynos4412 Odroid boardsMarek Szyprowski2016-06-061-0/+6
| | | | | | | | | | | | | | | | | | Enable support for Multimedia Codec (MFC) device for all Exynos4412-based Odroid boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* | ARM: dts: exynos: Lower SD card interface voltage to 2.8 V on Odroid X/X2/U3Krzysztof Kozlowski2016-05-301-3/+3
| | | | | | | | | | | | | | | | | | | | Odroid X/X2/U3 schematics say that SD card vmmc regulator (LDO21/TFLASH) operates on 2.8 V. Mainline U-Boot uses that value as well and 2.8 V is common on Exynos-based boards. Additionally use some descriptive name for this regulator. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
* | ARM: dts: exynos: Define vqmmc for eMMC card on Odroid X/X2/U3Krzysztof Kozlowski2016-05-301-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | The eMMC card vmmc-supply contained incorrectly two regulators: LDO20 and buck8. The second one is ignored. Additionally the buck8 is a vqmmc supply only on X and X2. On U3 the buck8 is providing power to the LAN (SMSC95xx) so instead the LDO22 should be used. Fix this by defining proper vmmc and vqmmc supplies for respective boards. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
* | ARM: dts: exynos: Define vqmmc for SD card and allow disabling regulators on ↵Krzysztof Kozlowski2016-05-301-3/+2
|/ | | | | | | | | | | | Odroid X/X2/U3 The SD-card vmmc-supply contained incorrectly two regulators. The second one is ignored. Fix this by defining proper vmmc and vqmmc supplies. Additionally these regulators do not have to be always on, so allow disabling them to reduce energy consumption. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
* Merge tag 'armsoc-late' of ↵Linus Torvalds2016-05-251-4/+52
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "This is a collection of a few late fixes and other misc stuff that had dependencies on things being merged from other trees. The Renesas R-Car power domain handling, and the Nvidia Tegra USB support both hand notable changes that required changing the DT binding in a way that only provides compatibility with old DT blobs on new kernels but not vice versa. As a consequence, the DT changes are based on top of the driver changes and are now in this branch. For NXP i.MX and Samsung Exynos, the changes in here depend on other changes that got merged through the clk maintainer tree" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) ARM: dts: exynos: Add support of Bus frequency using VDD_INT for exynos5422-odroidxu3 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos542x SoC ARM: dts: exynos: Add NoC Probe dt node for Exynos542x SoC ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3 ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 ARM: dts: exynos: Add support of bus frequency using VDD_INT for exynos3250-rinato ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4210 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos4x12 ARM: dts: exynos: Add bus nodes using VDD_MIF for Exynos4x12 ARM: dts: exynos: Add bus nodes using VDD_INT for Exynos3250 ARM: dts: exynos: Add DMC bus frequency for exynos3250-rinato/monk ARM: dts: exynos: Add DMC bus node for Exynos3250 ARM: tegra: Enable XUSB on Nyan ARM: tegra: Enable XUSB on Jetson TK1 ARM: tegra: Enable XUSB on Venice2 ARM: tegra: Add Tegra124 XUSB controller ARM: tegra: Move Tegra124 to the new XUSB pad controller binding ARM: dts: r8a7794: Use SYSC "always-on" PM Domain ARM: dts: r8a7793: Use SYSC "always-on" PM Domain ...
| * ARM: dts: exynos: Add support of bus frequency for exynos4412-trats/odroidu3Chanwoo Choi2016-05-031-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the bus device tree nodes for both MIF (Memory) and INT (Internal) block to enable the bus frequency. The DMC bus is parent device in MIF block using VDD_MIF and the LEFTBUS bus is parent device in INT block using VDD_INT. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| * ARM: dts: exynos: Expand the voltage range of buck1/3 regulator for ↵Chanwoo Choi2016-05-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | exynos4412-odroidu3 This patch expands the voltage range of buck1/3 regulator due to as following: - MIF (Memory Interface) bus frequency needs the range of '900 - 1100 mV'. - INT (Internal) bus frequency needs the range of '900 - 1050 mV'. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
| * ARM: dts: exynos: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodesChanwoo Choi2016-05-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the exynos4412-ppmu-common.dtsi to remove duplicate PPMU nodes because exynos3250-rinato/monk, exynos4412-trats2/odroidu3 has the same PPMU device tree node. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* | ARM: dts: exynos: Enable PRNG and SSS for all Exynos4 devicesKrzysztof Kozlowski2016-04-271-4/+0
| | | | | | | | | | | | | | | | | | There is no external dependency for Security SubSystem (SSS) block so the nodes for Pseudo Random Number Generator and AES hardware acceleration can be enabled always for all Exynos4 devices. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* | ARM: dts: exynos: Enable the HDMI CEC device on Exynos4412 Odroid boardsMarek Szyprowski2016-03-291-0/+4
| | | | | | | | | | | | | | | | | | | | Add a dts node entry and enable the HDMI CEC device present in the Exynos4 family of SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [k.kozlowski: Put the node in alphabetical order] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* | ARM: dts: exynos: Enable SSS on Odroid X/X2/U3 familyKrzysztof Kozlowski2016-03-291-0/+4
|/ | | | | | | | | Enable the Security SubSystem (SSS) on Exynos4412-based Odroid boards to provide hardware acceleration for AES operations. Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
* ARM: dts: Replace legacy *,wakeup property with wakeup-source for exynos boardsSudeep Holla2016-01-291-1/+1
| | | | | | | | | | | | | | Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "linux-keypad,wakeup" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* ARM: dts: Unify G2D device node with other devices on exynos4Marek Szyprowski2015-12-291-4/+0
| | | | | | | | G2D device is always available and doesn't depend on any external (board specific) peripherals, so it can be unconditionally enabled. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* ARM: dts: Use GPIO constants for flags cells in exynos4412 boardsJavier Martinez Canillas2015-10-081-7/+8
| | | | | | | | The board DTS are using numeric values instead of the defined GPIO constanst to express polarity, use them to make the DTS more clear. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: Unify voltage regulator style in exynos4412-odroidTobias Jakobi2015-09-291-4/+2
| | | | | | | | | Use 'ldoN_reg: LDON' syntax and drop the deprecated 'regulator-compatible' property. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* ARM: dts: Remove redundant pinctrl settings in exynos4412-odroidTobias Jakobi2015-09-291-6/+0
| | | | | | | | | The pinctrl settings in i2c_0 and i2c_1 are already provided through the exynos4 dtsi. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* ARM: dts: add CPU OPP and regulator supply property for exynos4x12Bartlomiej Zolnierkiewicz2015-08-131-0/+4
| | | | | | | | | | | | | | | | | | | | For Exynos4x12 platforms, add CPU operating points (using opp-v2 bindings) and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver. Based on the earlier work by Thomas Abraham. Cc: Doug Anderson <dianders@chromium.org> Cc: Andreas Faerber <afaerber@suse.de> Cc: Thomas Abraham <thomas.ab@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: Use labels for overriding nodes in exynos4412-odroidKrzysztof Kozlowski2015-06-031-366/+366
| | | | | | | | | | | | Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> For thermal zones: Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* ARM: dts: add 'rtc_src' clock to rtc node for exynos4412-odroid boardsMarkus Reichl2015-05-081-0/+3
| | | | | | | | | | | | | The Exynos4412 SoC has a s3c6410 RTC where the source clock is now a mandatory property. This patch fixes probe failure of s3c-rtc on Odroid-X2/U2/U3 boards. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* Merge tag 'samsung-dt' of ↵Olof Johansson2015-04-031-0/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung DT updates for v4.1" from Kukjin Kim: - for exynos3250 : add assigned clock parents for CMU nodes - for exynos4412-odroid : add eMMC reset line - for exynos5250 : fixed typo for interrupt-cells - for exynos5250-snow : define stdout-path property : represent bridge and panel connection : enable wifi power-on and add cap-sdio-irq to wifi mmc node - for exynos5250-spring : define stdout-path property - for exynos5420 : fixed typo for interrupt-cells : add async-bridge clocks for gsc and disp1 PDs - for exynos5420 boards : Mux XMMCnDATA[0] pad correctly - for exynos5420-odroidxu3 : add eMMC reset line - for Peach boards : add HS400 support and define stdout-path property : add mclk entry and add WiFi module support : represent bridge and panel connection * tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Fixed typo interrupt-cells for exynos5420 and exynos5250 ARM: dts: Add HS400 support for exynos5420 and exynos5800 ARM: dts: add async-bridge clocks to gsc power domain for exynos5420 ARM: dts: add async-bridge clocks to disp1 power domain for exynos5420 dt-bindings: add asynchronous bridge clock for exynos ARM: dts: Define stdout-path property for exynos5250-spring ARM: dts: Define stdout-path property for exynos5250-snow ARM: dts: Define stdout-path property for Peach boards ARM: dts: Add assigned clock parents to CMU node for exynos3250 ARM: dts: Add mclk entry for Peach boards ARM: dts: Add WiFi module support for Peach boards ARM: dts: Mux XMMCnDATA[0] pad correctly for Exynos5420 boards ARM: dts: add eMMC reset line for exynos5422-odroidxu3 ARM: dts: add eMMC reset line for exynos4412-odroid-common ARM: dts: represent bridge and panel connection for exynos5420-peach-pit ARM: dts: represent bridge and panel connection for exynos5250-snow ARM: dts: Add cap-sdio-irq to wifi mmc node for exynos5250-snow ARM: dts: Enable wifi power-on for exynos5250-snow Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: dts: add eMMC reset line for exynos4412-odroid-commonMarek Szyprowski2015-02-261-0/+14
| | | | | | | | | | | | | | | | | | This patch adds reset-gpios property to the eMMC slot, so the MMC driver is able to properly reset eMMC card on system restart and thus fixes system hang on software reboot. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | ARM: dts: enable hdmi support for exynos4412-odroid-commonMarek Szyprowski2015-02-261-3/+40
| | | | | | | | | | | | | | | | This patch adds nodes specific to Exynos4412 based Odroid X/X2/U2/U3 boards required for enabling HDMI display. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | ARM: dts: Adding CPU cooling binding for Exynos SoCsLukasz Majewski2015-02-261-0/+15
| | | | | | | | | | | | | | | | | | Presented patch aims to move data necessary for correct CPU cooling device configuration from exynos_tmu_data.c to device tree. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | ARM: dts: Enable TMU for exynos4412-odriod-commonLukasz Majewski2015-02-261-0/+5
| | | | | | | | | | | | | | | | | | This commit enables TMU IP block on the Exynos4412 Odroid based devices such as Odroid U3. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | ARM: dts: Add LDO10 for TMU for exynos4412-odroid-commonLukasz Majewski2015-02-261-0/+7
|/ | | | | | | | This patch adds LDO10 regulator node for TMU. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* Merge tag 'dt-for-linus' of ↵Linus Torvalds2015-02-171-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
| * ARM: dts: add 'dr_mode' property to hsotg devices for exynos boardsMarek Szyprowski2015-01-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | All currently supported boards use hsotg/dwc2 controller in device ('peripheral') mode, so add property which sets correct operation mode. This patch fixes support in recent changes in dwc2 driver, which added support for dual-role devices. Suggested-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
* | Merge tag 'tty-3.20-rc1' of ↵Linus Torvalds2015-02-151-0/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver patches from Greg KH: "Here's the big tty/serial driver update for 3.20-rc1. Nothing huge here, just lots of driver updates and some core tty layer fixes as well. All have been in linux-next with no reported issues" * tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) serial: 8250: Fix UART_BUG_TXEN workaround serial: driver for ETRAX FS UART tty: remove unused variable sprop serial: of-serial: fetch line number from DT serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE tty/serial: serial8250_set_divisor() can be static tty/serial: Add Spreadtrum sc9836-uart driver support Documentation: DT: Add bindings for Spreadtrum SoC Platform serial: samsung: remove redundant interrupt enabling tty: Remove external interface for tty_set_termios() serial: omap: Fix RTS handling serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling serial: core: Rework hw-assisted flow control support tty/serial: 8250_early: Add support for PXA UARTs tty/serial: of_serial: add support for PXA/MMP uarts tty/serial: of_serial: add DT alias ID handling serial: 8250: Prevent concurrent updates to shadow registers serial: 8250: Use canary to restart console after suspend serial: 8250: Refactor XR17V35X divisor calculation serial: 8250: Refactor divisor programming ...
| * | ARM: dts: exynos4: Add stdout-path propertiesTomasz Figa2015-02-021-0/+4
| |/ | | | | | | | | | | | | | | | | | | This patch adds stdout-path property to chosen nodes of Exynos4 boards to enable use of earlycon feature without the need to hardcode port number in kernel itself. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | ARM: dts: Switch Odroid X2/U2 to simple-audio-cardSylwester Nawrocki2015-02-091-3/+16
| | | | | | | | | | | | | | | | Now when the CDCLK I2S output clock can be handled through the clock API the Odroid X2/U3 can be switched to the simple-audio-card DT binding. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* | ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes updateSylwester Nawrocki2015-02-091-2/+6
|/ | | | | | | | | | | Clock related properties are added to the Exynos4 I2S device nodes so they can be referred to as clock providers. Missing i2s_opclk1 clock is added to the I2S0 node and clock properties are added to the MAX98090 codec node to allow it to control/read frequency of the MCLK clock directly. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* ARM: dts: Specify audio clock parents and rates for exynos4412-odroid-commonSylwester Nawrocki2014-11-221-0/+10
| | | | | | | | | | This ensures the core and the audio subsystem clocks are configured properly, as expected by the sound machine driver. These bits are missing to obtain proper audio sample rates in kernel v3.17, where audio support for Odroid X2/U3 was first added. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 09:44:37 +0100