summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/exynos5410-odroidxu.dts (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: Move .dts files to vendor sub-directoriesRob Herring2023-06-211-664/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
* ARM: dts: exynos: add mmc aliasesHenrik Grimler2023-04-031-0/+2
| | | | | | | | | | | | | | Add aliases for eMMC, SD card and WiFi where applicable, so that assigned mmc indeces are always the same. Co-developed-by: Anton Bambura <jenneron@protonmail.com> Signed-off-by: Anton Bambura <jenneron@protonmail.com> [ Tested on exynos5800-peach-pi ] Tested-by: Valentine Iourine <iourine@iourine.msk.su> Signed-off-by: Henrik Grimler <henrik@grimler.se> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20230402144724.17839-3-henrik@grimler.se Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
* ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v propertyHenrik Grimler2023-04-031-0/+1
| | | | | | | | | | | | | | | | | | Previously, the mshc0 alias has been necessary so that MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA are set for mshc_0/mmc_0. However, these capabilities should be described in the device tree so that we do not have to rely on the alias. The property mmc-ddr-1_8v replaces MMC_CAP_1_8V_DDR, while bus_width = <8>, which is already set for all the mshc0/mmc0 nodes, replaces MMC_CAP_8_BIT_DATA. Also drop other mshc aliases as they are not needed. Signed-off-by: Henrik Grimler <henrik@grimler.se> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20230402144724.17839-2-henrik@grimler.se Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
* Merge tag 'arm-fixes-6.3-1' of ↵Linus Torvalds2023-02-271-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A few bugfixes already came up during the merge window. Samsung, ASpeed, Spear have minor DT changes, in case of Samsung this fixes a regression compared to earlier versions. Bartosz takes over as the primary maintainer for the TI DaVinci platform, and we get a few last minute defconfig changes" * tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: spear320-hmi: correct STMPE GPIO compatible ARM: dts: aspeed: p10bmc: Update battery node name arm64: defconfig: Add IOSCHED_BFQ to the default configs arm64: defconfig: Fix unintentional disablement of PCI on i.MX ARM: dts: exynos: correct TMU phandle in Odroid XU3 family ARM: dts: exynos: correct TMU phandle in Odroid HC1 ARM: dts: exynos: correct TMU phandle in Odroid XU ARM: dts: exynos: correct TMU phandle in Exynos5250 ARM: dts: exynos: correct TMU phandle in Exynos4210 ARM: dts: exynos: correct TMU phandle in Exynos4 MAINTAINERS: make me the maintainer of DaVinci platforms
| * ARM: dts: exynos: correct TMU phandle in Odroid XUKrzysztof Kozlowski2023-02-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing it must not have an argument to phandle. Since thermal-sensors property is already defined in included exynosi5410.dtsi, drop it from exynos5410-odroidxu.dts to fix the error and remoev redundancy. Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230209105841.779596-4-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
* | ARM: dts: exynos: correct HSI2C properties in Exynos5410 Odroid XUKrzysztof Kozlowski2023-01-231-2/+1
|/ | | | | | | | | | | The HSI2C controller uses clock-frequency and does not have i2c-sda-delay. The properties were copy-pasted from the slower S3C-family I2C controller: exynos5410-odroidxu.dtb: i2c@12ca0000: Unevaluated properties are not allowed ('samsung,i2c-max-bus-freq', 'samsung,i2c-sda-delay' were unexpected) Link: https://lore.kernel.org/r/20230120155404.323386-12-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
* ARM: dts: exynos: fix compatible strings for Ethernet USB devicesOleksij Rempel2022-04-041-1/+1
| | | | | | | | | | | | | | | | Fix compatible string for Ethernet USB device as required by USB device schema: Documentation/devicetree/bindings/usb/usb-device.yaml The textual representation of VID and PID shall be in lower case hexadecimal with leading zeroes suppressed. Since there are no kernel driver matching against this compatibles, I expect no regressions with this patch. At the same time, without this fix, we are not be able to validate this device nodes with newly provided DT schema. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220216074927.3619425-7-o.rempel@pengutronix.de Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
* ARM: dts: exynos: fix ethernet node name for different odroid boardsOleksij Rempel2022-04-041-1/+1
| | | | | | | | | | | | | The node name of Ethernet controller should be "ethernet" instead of "usbether" as required by Ethernet controller devicetree schema: Documentation/devicetree/bindings/net/ethernet-controller.yaml This patch can potentially affect boot loaders patching against full node path instead of using device aliases. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20220216074927.3619425-6-o.rempel@pengutronix.de Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
* Merge tag 'samsung-dt-pinctrl-5.18' of ↵Arnd Bergmann2022-02-251-15/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung pinctrl DTS and driver changes for v5.18 Conversion of Samsung pinctrl bindings to dtschema followed up with alignment of DTS files to the dtschema. The entire work consists of three parts but everything should be merged at once to avoid dtschema check errors: 1. Samsung pinctrl driver change necessary to accept new DTS (driver depends on node names and this has to be adjusted because of dtschema). 2. Conversion to dtschema which brings requirement of different naming of the GPIO nodes. 3. DTS commits depending on driver (1) above, which convert all GPIO pin bank names to new naming, required by dtschema. This also includes few cleanups around DTS which are here to avoid any merge conflicts. The Samsung pinctrl driver changes are backwards compatible. However the DTS changes (renaming nodes) could cause problems in out-of-tree or other project implementations of the driver. * tag 'samsung-dt-pinctrl-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (28 commits) arm64: dts: exynos: use dedicated wake-up pinctrl compatible in ExynosAutov9 ARM: dts: s5pv210: align pinctrl with dtschema ARM: dts: s3c64xx: align pinctrl with dtschema ARM: dts: s3c24xx: align pinctrl with dtschema arm64: dts: exynos: align pinctrl with dtschema in ExynosAutov9 arm64: dts: exynos: align pinctrl with dtschema in Exynos7 arm64: dts: exynos: align pinctrl with dtschema in Exynos5433 ARM: dts: exynos: align pinctrl with dtschema in Exynos542x/5800 ARM: dts: exynos: align pinctrl with dtschema in Exynos5410 ARM: dts: exynos: align pinctrl with dtschema in Exynos5260 ARM: dts: exynos: align pinctrl with dtschema in Exynos5250 ARM: dts: exynos: align pinctrl with dtschema in Exynos4412 ARM: dts: exynos: align pinctrl with dtschema in Exynos4210 ARM: dts: exynos: align pinctrl with dtschema in Exynos3250 ARM: dts: s3c64xx: drop unneeded pinctrl wake-up interrupt mapping ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pi ARM: dts: exynos: override pins by label in Peach Pi ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pit ARM: dts: exynos: override pins by label in Peach Pit ARM: dts: exynos: simplify PMIC DVS pin configuration in Odroid XU ... Link: https://lore.kernel.org/r/20220129115352.13274-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * ARM: dts: exynos: align pinctrl with dtschema in Exynos5410Krzysztof Kozlowski2022-01-231-5/+5
| | | | | | | | | | | | | | | | Align the pin controller related nodes with dtschema. No functional change expected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220111201722.327219-9-krzysztof.kozlowski@canonical.com
| * ARM: dts: exynos: simplify PMIC DVS pin configuration in Odroid XUKrzysztof Kozlowski2022-01-231-10/+2
| | | | | | | | | | | | | | | | The pin configuration for PMIC DVS (pmic-dvs-2 and pmic-dvs-3) are exactly the same, so merge them. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220111201426.326777-5-krzysztof.kozlowski@canonical.com
* | ARM: dts: exynos: drop unsupported MAX77802 regulators on Odroid XUKrzysztof Kozlowski2022-01-231-12/+0
|/ | | | | | | | The numbering of regulators is not continuous and the MAX77802 does not support regulators LDO16, LDO22 and LDO31. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211228164305.35877-2-krzysztof.kozlowski@canonical.com
* ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XUKrzysztof Kozlowski2021-05-111-0/+1
| | | | | | | | The RTC on Maxim max77802 PMIC can wakeup the system from suspend to RAM. Add a generic property for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210420164943.11152-4-krzysztof.kozlowski@canonical.com
* ARM: dts: exynos: Add Ethernet interface description for Odroid XUŁukasz Stelmach2020-11-051-0/+15
| | | | | | | | | | | Add Ethernet interface description for Odroid XU. Add an alias to enable bootloaders to find the Ethernet interface and assign a MAC address. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Link: https://lore.kernel.org/r/20201103184412.18874-5-l.stelmach@samsung.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: adjust node names to DT spec in Odroid XUKrzysztof Kozlowski2020-10-281-1/+1
| | | | | | | | | | | The Devicetree specification expects device node names to have a generic name, representing the class of a device. Also the convention for node names is to use hyphens, not underscores. No functional changes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201027170947.132725-8-krzk@kernel.org
* ARM: dts: exynos: disable pull up of USB 3.0 over-current on Odroid XUKrzysztof Kozlowski2020-10-261-0/+10
| | | | | | | | | The Odroid XU has external pull ups for USB 3.0 over-current pins, so disable the internal one. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-4-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com>
* ARM: dts: exynos: fix USB 3.0 pins supply being turned off on Odroid XUKrzysztof Kozlowski2020-10-261-0/+2
| | | | | | | | | | | | | | | On Odroid XU LDO12 and LDO15 supplies the power to USB 3.0 blocks but the GPK GPIO pins are supplied by LDO7 (VDDQ_LCD). LDO7 also supplies GPJ GPIO pins. The Exynos pinctrl driver does not take any supplies, so to have entire GPIO block always available, make the regulator always on. Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-3-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com>
* ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XUKrzysztof Kozlowski2020-10-261-2/+2
| | | | | | | | | | | | On Odroid XU board the USB3-0 port is a microUSB and USB3-1 port is USB type A (host). The roles were copied from Odroid XU3 (Exynos5422) design which has it reversed. Fixes: 8149afe4dbf9 ("ARM: dts: exynos: Add initial support for Odroid XU board") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201015182044.480562-1-krzk@kernel.org Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@gmail.com>
* ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5Krzysztof Kozlowski2020-09-031-4/+4
| | | | | | | | Remove double space after '=' and fix indentation in Exynos5250, Exynos5410 and Exynos5420 DTS files. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-7-krzk@kernel.org
* ARM: dts: exynos: Correct USB3503 GPIOs polarityMarek Szyprowski2019-12-121-1/+1
| | | | | | | | | | | | | Current USB3503 driver ignores GPIO polarity and always operates as if the GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing USB3503 chip applications to match the chip specification and common convention for naming the pins. The only pin, which has to be ACTIVE_LOW is the reset pin. The remaining are ACTIVE_HIGH. This change allows later to fix the USB3503 driver to properly use generic GPIO bindings and read polarity from DT. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add ADC node to Exynos5410 and Odroid XUKrzysztof Kozlowski2019-06-111-0/+5
| | | | | | | Move the ADC from exynos5420.dtsi to a shared file between Exynos5410 and Exynos542x: exynos54xx.dtsi. Enable the ADC on Odroid XU board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" propertiesRobin Murphy2019-04-281-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | The old "cooling-{min,max}-state" properties for thermal bindings were ratified to "cooling-{min,max}-level" by commit eb168b70dea5 ("of: thermal: Fix inconsitency between cooling-*-state and cooling-*-level"), which were later removed entirely by commit e04907dbc259 ("dt-bindings: thermal: Remove "cooling-{min|max}-level" properties"). The pwm-fan binding, however, was apparently in-flight in parallel with that ratification, and so managed to introduce an example of the old properties which escaped the scope of the later cleanup and has thus continued to be dutifully copied for new boards despite being useless. Clean up these remaining undocumented anachronisms to minimise any further confusion. Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XUKrzysztof Kozlowski2018-10-011-1/+9
| | | | | | | Add SD card write-protect pin configuration to be sure that it will be properly pulled down to indicate write access. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add SPDX license identifiersKrzysztof Kozlowski2018-01-031-4/+1
| | | | | | Replace GPL v2.0 license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* arm: dts: fix unit-address leading 0sRob Herring2017-10-201-3/+3
| | | | | | | | | | | | | Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: dts: exynos: Add entries for sound support on Odroid-XU boardSylwester Nawrocki2016-10-171-0/+69
| | | | | | | | | This patch adds device nodes for the AUDSS clock controller, peripheral DMA 0/1 controllers and the Audio Subsystem I2S controller. These entries are required for sound support on Odroid-XU board. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2016-10-081-17/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "These are as usual a very large number of mostly boring updates to enable devices in existing machines, or to fix minor bugs. Notably, an ongoing treewide effort to fix warnings caused by an update to the device tree compiler. These are enabled with "make W=1" at the moment but can hopefully become the default once all issues have been addressed. No new SoC platform is added this time around (Armada 395 and Orion mv88f5181 are slight variations of existing ones), but a significant number of new dts files are added, which I list by platform: - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets, Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo single-board computers - ARM Realview: all supported machines (ported from board files) - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and BCM958622hr reference boards for Northstar platform, Raspberry Pi Zero single-board computer - Marvell EBU: Netgear WNR854T router (ported from board file), Armada 395 SoC platform and GP board Armada 390 DB development board - NXP i.MX: imx7s Warp7 reference board, Gateworks Ventana GW553x single-board computer, Technologic Systems TS-4900 and Engicam IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board - Qualcomm: LG Nexus 5 Phone - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards - Rockchip: Rockchip RK3288 Fennec reference board, Firefly RK3288 Reload platform - ST Microelectronics STi: B2260 (96boards) single-board computer - TI Davinci: OMAP-L138 LCDK Development kit - TI OMAP: beagleboard-x15 rev B1 single-board computer" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (390 commits) ARM: dts: sony-nsz-gs7: add missing unit name to /memory node ARM: dts: chromecast: add missing unit name to /memory node ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node ARM: dts: berlin2: Add missing unit name to /soc node ARM: dts: berlin2cd: Add missing unit name to /soc node ARM: dts: berlin2q: Add missing unit name to /soc node ARM: dts: berlin2: Remove skeleton.dtsi inclusion ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion ARM: dts: berlin2q: Remove skeleton.dtsi inclusion arm: dts: berlin2q: enable all wdt nodes unconditionally arm: dts: berlin2: enable all wdt nodes unconditionally ARM: dts: omap5-igep0050.dts: Use tabs for indentation ARM: dts: Fix igepv5 power button GPIO direction ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node ARM: dts: s3c64xx: Use macros for pinctrl configuration ARM: dts: s3c2416: Use macros for pinctrl configuration ARM: dts: s5pv210: Use macros for pinctrl configuration ARM: dts: s3c64xx: Use common macros for pinctrl configuration ...
| * Merge tag 'samsung-dt-pinctrl-4.9' of ↵Arnd Bergmann2016-09-191-15/+15
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Topic branch for Samsung DeviceTree cleanup for 4.9" from Krzysztof Kozłowski: Replace in DT sources hard-coded values for pinctrl configuration like pull up/down, drive strength and function. This makes the DTS easier to read, especially that some drive strengths values are quite non-obvious. * tag 'samsung-dt-pinctrl-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s3c64xx: Use macros for pinctrl configuration ARM: dts: s3c2416: Use macros for pinctrl configuration ARM: dts: s5pv210: Use macros for pinctrl configuration ARM: dts: s3c64xx: Use common macros for pinctrl configuration ARM: dts: exynos: Fix mismatched values of SD drive strengh configuration on exynos4415 ARM: dts: exynos: Fix mismatched value for SD4 pull up/down configuration on exynos4210 ARM: dts: exynos: Use macros for pinctrl configuration on exynos542x/exynos5800 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5260 ARM: dts: exynos: Use macros for pinctrl configuration on exynos5250 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4415 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4x12 ARM: dts: exynos: Use macros for pinctrl configuration on exynos4210 ARM: dts: exynos: Use macros for pinctrl configuration on exynos3250 ARM: dts: exynos: Use common macros for pinctrl configuration pinctrl: dt-bindings: samsung: Update documentation with new macros pinctrl: dt-bindings: samsung: Add header with values used for configuration
| | * ARM: dts: exynos: Use macros for pinctrl configuration on exynos5410Krzysztof Kozlowski2016-09-161-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage of DTS macros instead of hard-coded numbers makes code easier to read. One does not have to remember which value means pull-up/down or specific driver strength. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
| * | ARM: dts: exynos: Add missing unit name to memory nodes in Exynos5 DTSJavier Martinez Canillas2016-09-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
| * | ARM: dts: exynos: Remove skeleton.dtsi usage for Exynos5Javier Martinez Canillas2016-09-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" The disassembled DTB are almost the same besides an empty chosen node being removed and nodes reordered, so it should not have functional changes. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
| * | ARM: dts: exynos: Use stdout non-deprecated property and add serial options ↵Krzysztof Kozlowski2016-08-191-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | to Odroid XU/XU3/XU4 The "linux,stdout-path" is deprecated. Add serial options so the console can be properly configured when bootloader does not pass "console" parameter to the command line. Without options and lack of "console" in command line, the serial output dies during boot (just after probing sound, probably because of rate change). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
* / ARM: dts: exynos: Properly select eMMC HighSpeed mode on Odroid XUKrzysztof Kozlowski2016-08-101-3/+0
|/ | | | | | | | | | | | | | | | | | Exynos5410 supports eMMC version 4.41 so HS200 is the top mode which should be configured. This is reflected in usage of "samsung,exynos5250-dw-mshc" compatible. However Odroid XU DTS contained also property "mmc-hs400-1_8v" which is parsed by MMC core therefore resulting in mixed configuration. MMC core set HS400 but dwmmc_exynos driver did not configure the data strobe for HS400 DDR mode. Removal of HS400 properties fixes semi-random mmc errors during boot: mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1) mmc0: mmc_select_hs400 failed, error -84 mmc0: error -84 whilst initialising MMC card Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
* ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU boardKrzysztof Kozlowski2016-06-061-1/+460
| | | | | | | | | | | | | | Extend the DTS for Exynos5410-based Odroid XU board with: 1. Proper PWM outputs, 2. usb3503 USB HUB (with integrated LAN9730 ethernet adapter (smsc95xx)), 3. Maxim 77802 PMIC (regulators, 32 kHz clocks, RTC), 4. CPU thermal (trip points are the same as in Odroid XU3/XU4 but cooling maps are different as there is no CPU freq and only one cluster available for now), 5. Regulator supplies for USB 3.0. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
* ARM: dts: exynos: Add initial support for Odroid XU boardKrzysztof Kozlowski2016-05-311-0/+121
The Hardkernel's Odroid XU board was first design with big.LITTLE SoC from Samsung: the Exynos5410. Details: 1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is enabled), 2. 2 GB DDR3 RAM, 3. PowerVR SGX544MP3 GPU (not enabled in DTS), 4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4, 5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of revisions though), 6. eMMC 4.5 and microSD slots. Comparing this board to Odroid XU3 (more popular), the differences are: 1. Exynos5410 instead of 5422, 2. MIPI DSI LCD connector, 3. Main PMIC: Maxim 77802 instead of S2MPS11, 4. USB3503+LAN9730 instead of integrated LAN9514, 5. eMMC 4.5 instead of eMMC 5.0, This patch adds initial support for the XU board with working basic functions, eMMC/SD and USB (including attached ethernet adapter). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Link: http://www.hardkernel.com/main/products/prdt_info.php?g_code=G137510300620
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 23:51:08 +0100