summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/qcom-apq8084.dtsi (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: Move .dts files to vendor sub-directoriesRob Herring2023-06-211-852/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The arm dts directory has grown to 1559 boards which makes it a bit unwieldy to maintain and use. Past attempts stalled out due to plans to move .dts files out of the kernel tree. Doing that is no longer planned (any time soon at least), so let's go ahead and group .dts files by vendors. This move aligns arm with arm64 .dts file structure. There's no change to dtbs_install as the flat structure is maintained on install. The naming of vendor directories is roughly in this order of preference: - Matching original and current SoC vendor prefix/name (e.g. ti, qcom) - Current vendor prefix/name if still actively sold (SoCs which have been aquired) (e.g. nxp/imx) - Existing platform name for older platforms not sold/maintained by any company (e.g. gemini, nspire) The whole move was scripted with the exception of MAINTAINERS and a few makefile fixups. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Paul Barker <paul.barker@sancloud.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Nick Hawkins <nick.hawkins@hpe.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom Acked-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Acked-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Romain Perier <romain.perier@gmail.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
* ARM: dts: qcom: apq8084: correct thermal sensor unit-addressKrzysztof Kozlowski2023-05-301-1/+1
| | | | | | | | | | | Match unit-address to reg entry to fix dtbs W=1 warnings: Warning (simple_bus_reg): /soc/thermal-sensor@fc4a8000: simple-bus unit address format error, expected "fc4a9000" Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230420075053.41976-10-krzysztof.kozlowski@linaro.org
* ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodesChristian Marangi2023-03-161-4/+4
| | | | | | | | | | Change kpss-acc-v2 nodes naming to power-manager to reflect Documentation schema. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230116204751.23045-8-ansuelsmth@gmail.com
* ARM: dts: qcom: apq8084: add clocks and clock-names to gcc deviceDmitry Baryshkov2023-01-191-0/+18
| | | | | | | | | | Add clocks and clock-names nodes to the gcc device to bind clocks using the DT links. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230111060402.1168726-13-dmitry.baryshkov@linaro.org
* ARM: dts: qcom-apq8084: specify per-sensor calibration cellsDmitry Baryshkov2023-01-191-6/+307
| | | | | | | | | Specify pre-parsed per-sensor calibration nvmem cells in the tsens device node rather than parsing the whole data blob in the driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230101194034.831222-21-dmitry.baryshkov@linaro.org
* ARM: dts: qcom: apq8084-ifc6540: fix overriding SDHCIKrzysztof Kozlowski2022-12-281-2/+2
| | | | | | | | | | | | While changing node names of APQ8084 SDHCI, the ones in IFC6540 board were not updated leading to disabled and misconfigured SDHCI. Cc: <stable@vger.kernel.org> Fixes: 2477d81901a2 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221204084614.12193-1-krzysztof.kozlowski@linaro.org
* ARM: dts: qcom: apq8084: fix compatible for l2-cacheLuca Weiss2022-10-181-1/+1
| | | | | | | | | | | The compatible "qcom,arch-cache" for l2-cache does not exist, and all other Qualcomm boards use just "cache" for it. Fix it. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221013190657.48499-2-luca@z3ntu.xyz
* ARM: dts: qcom: apq8084: add tsens interruptLuca Weiss2022-10-181-0/+2
| | | | | | | | | | | Add the interrupt for tsens, based on the information from downstream msm-3.4 dts. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220925161317.76356-2-luca@z3ntu.xyz
* ARM: dts: qcom: msm8974: fix tsens compatibleLuca Weiss2022-10-181-1/+1
| | | | | | | | | | | | Bindings mandate the use of the fallback compatible qcom,tsens-v0_1 for msm8974. Add it to fix the warning. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220925161317.76356-1-luca@z3ntu.xyz
* ARM: dts: qcom: fix node name for rpm-msg-ramLuca Weiss2022-10-181-1/+1
| | | | | | | | | | | | | Adjust the name to match the bindings and fix the following validation error: <snip>/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dtb: memory@fc428000: $nodename:0: 'memory@fc428000' does not match '^sram(@.*)?' From schema: <snip>/Documentation/devicetree/bindings/sram/sram.yaml Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220924145126.24978-1-luca@z3ntu.xyz
* ARM: dts: qcom: align RPM regulators node name with bindingsKrzysztof Kozlowski2022-10-171-1/+1
| | | | | | | | | Node names should be generic and new DT schema expects RPM regulators node to be just "regulators". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220926092104.111449-4-krzysztof.kozlowski@linaro.org
* ARM: dts: qcom: align SDHCI clocks with DT schemaKrzysztof Kozlowski2022-09-141-6/+6
| | | | | | | | | | The DT schema expects clocks iface-core order. No functional change. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220712144245.17417-6-krzysztof.kozlowski@linaro.org
* ARM: dts: qcom: align SDHCI reg-names with DT schemaKrzysztof Kozlowski2022-09-141-2/+2
| | | | | | | | | | | DT schema requires SDHCI reg names to be hc/core without "_mem" suffix, just like TXT bindings were expecting before the conversion. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220712144245.17417-5-krzysztof.kozlowski@linaro.org
* ARM: dts: qcom: apq8084: switch TCSR mutex to MMIOKrzysztof Kozlowski2022-09-141-8/+3
| | | | | | | | | | | | | | The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom-apq8084-mtp.dtb: hwlock: 'reg' is a required property qcom-apq8084-mtp.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220909092035.223915-15-krzysztof.kozlowski@linaro.org
* ARM: dts: qcom: apq8084: add rpm-stats device nodeDmitry Baryshkov2022-08-181-0/+5
| | | | | | | | | Add device node for the rpm-stats pseudo device. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220726205355.598874-1-dmitry.baryshkov@linaro.org
* ARM: dts: qcom: extend scm compatible to match dt-schemaDavid Heidelberg2022-07-061-1/+1
| | | | | | | | | First device specific compatible, then general one. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220626183247.142776-1-david@ixit.cz
* ARM: dts: qcom: Fix sdhci node names - use 'mmc@'Bhupesh Sharma2022-07-031-2/+2
| | | | | | | | | | | | | | | | | Since the Qualcomm sdhci-msm device-tree binding has been converted to yaml format, 'make dtbs_check' reports issues with inconsistent 'sdhci@' convention used for specifying the sdhci nodes. The generic mmc bindings expect 'mmc@' format instead. Fix the same. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> [bjorn: Extracted from combined arm64 patch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220514215424.1007718-2-bhupesh.sharma@linaro.org
* ARM: dts: qcom: cleanup QFPROM nodesKrzysztof Kozlowski2022-06-301-2/+2
| | | | | | | | | Cleanup coding style of QFPROM nodes - put compatible as first property and drop tabs before '=' character. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220505113802.243301-3-krzysztof.kozlowski@linaro.org
* ARM: dts: qcom: use dedicated QFPROM compatiblesKrzysztof Kozlowski2022-06-301-1/+1
| | | | | | | | | Use dedicated compatibles for QFPROM on APQ8064, IPQ8064 and MSM9874, which is expected by the bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220505113802.243301-2-krzysztof.kozlowski@linaro.org
* ARM: dts: qcom: do not use underscore in node nameKrzysztof Kozlowski2022-04-131-1/+1
| | | | | | | | | | Align RPM requests node with DT schema by using hyphen instead of underscore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [bjorn: Fixed up qcom-{apq8074,msm8974}-*.dts to match the qcom-msm8974.dtsi] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220401201035.189106-8-krzysztof.kozlowski@linaro.org
* ARM: dts: qcom: fix thermal zones namingDavid Heidelberg2021-10-241-4/+4
| | | | | | | | | | | | Rename thermal zones according to dt-schema. Fix warnings like: arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml: thermal-zones: 'cpu-thermal0', 'cpu-thermal1', 'cpu-thermal2', 'cpu-thermal3' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020180002.195467-1-david@ixit.cz
* ARM: dts: qcom: add gpio-ranges propertyChristian Lamparter2020-02-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the gpio-ranges property to almost all of the Qualcomm ARM platforms that utilize the pinctrl-msm framework. The gpio-ranges property is part of the gpiolib subsystem. As a result, the binding text is available in section "2.1 gpio- and pin-controller interaction" of Documentation/devicetree/bindings/gpio/gpio.txt For more information please see the patch titled: "pinctrl: msm: fix gpio-hog related boot issues" from this series. Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019] Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Tested-by: Robert Marko <robert.marko@sartura.hr> [ipq4019] Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20200108125455.308969-1-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* ARM: dts: qcom: apq8084: Remove all instances of IRQ_TYPE_NONEVicthor Foster2019-12-291-20/+20
| | | | | | | | | | This patch removes all instances of IRQ_TYPE_NONE, which fixes warning messages during boot. It also changes interrupt types to their corresponding macros, as defined in arm-gic.h. Signed-off by: Victhor Foster <victhor.foster@ufpe.br> Link: https://lore.kernel.org/r/1238987932.9511963.1577060836760.JavaMail.zimbra@ufpe.br Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* ARM: dts: qcom: apq8084: Change tsens definition to new styleVicthor Foster2019-12-291-1/+3
| | | | | | | | | | | | | | This patch changes the tsens peripheral definition to the new style, which fixes a kernel panic caused by a change in the tsens driver, introduced by commit 37624b58542fb9f2d9a70e6ea006ef8a5f66c30b. There was a patch submitted recently to this list that should fix this problem with old device trees and the new driver, so it may be redundant at this point, in terms of fixing the kernel panic, but this should align the APQ8084 device tree with the others. Signed-off by: Victhor Foster <victhor.foster@ufpe.br> Link: https://lore.kernel.org/r/108381142.9510389.1577057823350.JavaMail.zimbra@ufpe.br Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
* ARM: dts: Kill off skeleton{64}.dtsiRob Herring2019-01-301-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the usage of skeleton.dtsi in the remaining dts files. It was deprecated since commit 9c0da3cc61f1 ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"). This will make adding a unit-address to memory nodes easier. The main tricky part to removing skeleton.dtsi is we could end up with no /memory node at all when a bootloader depends on one being present. I hacked up dtc to check for this condition. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: dts: qcom: Add SoC-specific string for sdhci-msm-v4 nodesDouglas Anderson2018-11-291-2/+2
| | | | | | | | | | As per upstream discussion [1], we should have an SoC-specific compatible string for Qualcomm's SDHCI nodes. Let's add it. [1] https://lkml.kernel.org/r/20181105203657.GA32282@bogus Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: dts: Add xo to sdhc clock node on qcom platformsRitesh Harjani2016-11-241-6/+10
| | | | | | | Add xo entry to sdhc clock node on all qcom platforms. Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* arm: dts: apq8084: Add thermal zones, tsens and qfprom nodesRajendra Nayak2016-09-021-0/+103
| | | | | | | | | Add thermal zones, tsens and qfprom nodes Acked-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* dts: qcom: apq8084: Add SCM firmware nodeAndy Gross2016-06-121-0/+8
| | | | | | | | This patch adds the firmware node for the SCM Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
* arm: dts: qcom: Add more board clocksStephen Boyd2016-02-231-0/+14
| | | | | | | | | | These clocks are fixed rate board sources that should be in DT. Add them. Cc: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
* arm: dts: Add support for PMA8084 on APQ8084Andy Gross2015-12-161-0/+52
| | | | | | | | This patch adds support for the PMA8084 regulators found on APQ8084 platforms. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
* arm: dts: Add RPM/SMD support on APQ8084Andy Gross2015-12-161-0/+20
| | | | | | | | This patch adds support for RPM and SMD nodes that are present on APQ8084 platforms. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
* arm: dts: Add APQ8084 SMEM nodesAndy Gross2015-12-161-0/+36
| | | | | | | This patch adds all the required nodes to support SMEM on APQ8084 Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
* arm: dts: qcom: Add #power-domain-cells propertyRajendra Nayak2015-10-131-0/+1
| | | | | | | | | | | clock controller nodes which also support power domains (gdscs') need to have a #power-domain-cells property. Add these for gcc and mmcc nodes of msm8974, gcc of apq8084 and msm8916. Also update gcc and mmcc bindings for it. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
* ARM: dts: qcom: Label serial nodes for aliasing and stdout-pathStephen Boyd2015-09-091-1/+1
| | | | | | | Add a label to the serial nodes that are being used for the console. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
* ARM: dts: qcom: Add idle states device nodes for 8084Lina Iyer2015-04-031-0/+14
| | | | | | | | | | | | Add ARM common idle states device bindings for cpuidle support for APQ 8084. Support Standalone power collapse (SPC) idle state (power down that does not affect any SoC idle states) for each cpu. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUsLina Iyer2015-04-031-1/+25
| | | | | | | | | | | Each Krait CPU in the QCOM 8084 SoC has an SAW power controller to regulate the power to the cpu and aide the core in entering idle states. Reference the SAW instance and associate the instance with the CPU core. Signed-off-by: Lina Iyer <lina.iyer@linaro.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974Ivan T. Ivanov2015-04-031-0/+16
| | | | | | | | Add SPMI PMIC Arbiter configuration nodes for APQ8084 and MSM8974. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: dts: qcom: Add TLMM DT node for APQ8084Georgi Djakov2014-09-111-0/+10
| | | | | | | | | This patch adds the TLMM node for the APQ8084 platform. Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
* ARM: dts: qcom: Add initial IFC6540 board device treeGeorgi Djakov2014-09-111-0/+23
| | | | | | | | | Add basic support for the IFC6540 single-board computer boards, that are based on the APQ8084 SoC. This patch adds the initial device tree and the neccessary nodes required for enabling the serial port and eMMC. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org>
* ARM: dts: qcom: Add APQ8084 serial port DT nodeGeorgi Djakov2014-08-211-0/+8
| | | | | | | | Add the necessary DT node to probe the serial driver on APQ8084 platforms. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
* ARM: dts: qcom: Add APQ8084 Global Clock Controller DT nodeGeorgi Djakov2014-08-211-0/+10
| | | | | | | | This patch adds the necessary node to probe the global clock controller on APQ8084 platforms. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
* ARM: dts: qcom: Add APQ8084 SoC supportGeorgi Djakov2014-05-291-0/+179
Add support for the Qualcomm Snapdragon 805 APQ8084 SoC. It is used on APQ8084-MTP and other boards. Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by: Kumar Gala <galak@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 13:54:01 +0100