summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2017-11-17439-11301/+22261
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ...
| * Merge tag 'v4.15-rockchip-dts32-2' of ↵Arnd Bergmann2017-11-076-16/+270
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 updates for 4.15 part2" from Heiko Stübner: CEC support for the two rk3288-firefly variants and general hdmi support for the firefly-reload. A lot of additions and corrections for the rk3288-vyasa and thermal support for the rv1108. * tag 'v4.15-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reload ARM: dts: rockchip: define the two possible rk3288 CEC pins ARM: dts: rockchip: add the cec clk for dw-hdmi on rk3288 ARM: dts: rockchip: Add io domains for rk3288-vyasa ARM: dts: rockchip: Add usb otg for rk3288-vyasa ARM: dts: rockchip: Add usb host for rk3288-vyasa ARM: dts: rockchip: Add gmac support for rk3288-vyasa board ARM: dts: rockchip: Add regulators for rk3288-vyasa ARM: dts: rockchip: Use vmmc-supply from PMIC on rk3288-vyasa ARM: dts: rockchip: Remove vdd_log from rk808, DCDC_REG1 on rk3288-vyasa ARM: dts: rockchip: enable tsadc module on RV1108 evaluation board ARM: dts: rockchip: add thermal nodes for RV1108 SoC ARM: dts: rockchip: add tsadc node for RV1108 SoC ARM: dts: rockchip: add RGA device node for RK3288
| | * ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reloadHans Verkuil2017-10-212-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vdd10_lcd and vcc18_lcd regulators need to be enabled for HDMI output to work, so add 'regulator-always-on', just as is done in rk3288-firefly.dtsi. Also enable i2c5, the hdmi block and configure the correc cec pin. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: define the two possible rk3288 CEC pinsHans Verkuil2017-10-211-0/+8
| | | | | | | | | | | | | | | | | | | | | The CEC line can be routed to two possible pins. Define those pins. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: add the cec clk for dw-hdmi on rk3288Hans Verkuil2017-10-211-2/+2
| | | | | | | | | | | | | | | | | | | | | The dw-hdmi block needs the cec clk for the rk3288. Add it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Add io domains for rk3288-vyasaJagan Teki2017-10-181-0/+15
| | | | | | | | | | | | | | | | | | | | | Add io domains supported by rk3288-vyasa board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Add usb otg for rk3288-vyasaJagan Teki2017-10-171-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add usb otg support for rk3288-vyasa, board support usb1 otg power through otg_vbus_drv and naming conversion followed as per schematic. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Add usb host for rk3288-vyasaJagan Teki2017-10-171-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add usb host support for rk3288-vyasa, board support hub power through phy_pwr_en and usb2 host power through usb2_pwr_en and naming conversion followed as per schematic. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Add gmac support for rk3288-vyasa boardJagan Teki2017-10-171-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | Add the external clock-reference, enable the gmac node and define the phy-related pin settings. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Add regulators for rk3288-vyasaJagan Teki2017-10-171-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add supporting regulators for rk3288-vyasa board, dc12_vbat is parent regulatorand followed regulators as are child regulators. regulator naming conversion followed as per schematic for better readability and easy for identification. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Use vmmc-supply from PMIC on rk3288-vyasaJagan Teki2017-10-171-20/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | rk808, SWITCH_REG1 has configured for sdmmc regulator as vcc_sd, so use the same by renaming vcc33_sd to vcc_sd(as per schematic) and drop explicit regulator definition from root. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Remove vdd_log from rk808, DCDC_REG1 on rk3288-vyasaJagan Teki2017-10-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | vdd_log, never used on DCDC_REG1 of rk808 from latest schematic so remove the same and update the regulator-name as 'vdd_arm' to sync with existing rk3288 board dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: enable tsadc module on RV1108 evaluation boardRocky Hao2017-10-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Enable tsadc module on RV1108 evaluation board Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: add thermal nodes for RV1108 SoCRocky Hao2017-10-171-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | Add thermal zone and dynamic CPU power coefficients for RV1108 Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: add tsadc node for RV1108 SoCRocky Hao2017-10-171-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add tsadc needed main information for RV1108 SoC. 750000Hz is the max clock rate supported by tsadc module. Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: add RGA device node for RK3288Jacob Chen2017-10-171-0/+11
| | | | | | | | | | | | | | | | | | | | | This patch add the RGA dt config of rk3288 SoC. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | Merge tag 'sunxi-dt-for-4.15-2' of ↵Arnd Bergmann2017-11-0717-46/+952
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Pull "Allwinner DT changes for 4.15, take 2" from Maxime Ripard: Here are a few commits that would be great to get in 4.15, given how long they've been hanging around. The first and most important one is the reintroduction of the EMAC DT changes after they've been reverted at the last minute in 4.13. There's a arm64 patch that crept in because the H5 and H3 share a common DTSI that is located in arch/arm, and merging that patch through the arm64 PR, especially given the pull requests that have already been sent, would just have generated too many conflicts. * tag 'sunxi-dt-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ARM: dts: sunxi: Restore EMAC changes (boards) ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac arm: dts: sunxi: h3/h5: Restore EMAC changes dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY dt-bindings: net: Restore sun8i dwmac binding
| | * | ARM: dts: sun8i: a711: Enable USB OTGMaxime Ripard2017-11-021-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TBS A711 has a micro-USB connector that can be used in OTG mode. Enable it. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a711: Add regulator supportMaxime Ripard2017-11-021-10/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TBS A711 is using an AXP813 PMIC. Let's add all the regulators for that board, and migrate the current, dumb, regulators to the actual ones. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1Chen-Yu Tsai2017-11-021-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WiFi side of the AP6212 WiFi/BT combo module is connected to mmc1. There are also GPIOs for enable and interrupts. An external clock from the AC100 RTC is also used. Enable WiFi on this board by enabling mmc1 and adding the power sequencing clocks and GPIO, as well as the chip's interrupt line. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1Chen-Yu Tsai2017-11-021-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WiFi side of the AP6330 WiFi/BT combo module is connected to mmc1. There are also GPIOs for enable and interrupts. An external clock from the AC100 RTC is also used. Enable WiFi on this board by enabling mmc1 and adding the power sequencing clocks and GPIO, as well as the chip's interrupt line. For the WiFi module to correctly detect the frequency of its main oscillator, the external low power clock must be set to 32768 Hz. Their does not seem to be proper out-of-band interrupt support for the BCM4330 chip within the AP6330 module. This part is left out for now. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi fileChen-Yu Tsai2017-11-022-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmc1 only has 1 possible pinmux setting. Move any settings to the dtsi file and set it by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodesChen-Yu Tsai2017-11-021-13/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds device nodes for all the regulators of the AXP818 PMIC. Sunxi common regulators are removed, and USB VBUS regulators are added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodesChen-Yu Tsai2017-11-021-9/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds device nodes for all the regulators of the AXP813 PMIC. Sunxi common regulators are removed, and USB VBUS regulators are added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodesChen-Yu Tsai2017-11-021-12/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds device nodes for all the regulators of the AXP818 PMIC. Sunxi common regulators are removed, and USB VBUS regulators are added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sunxi: Add dtsi for AXP81x PMICChen-Yu Tsai2017-11-021-0/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AXP81x family of PMIC is used with the Allwinner A83T and H8 SoCs. This includes the AXP813 and AXP818. There is no discernible difference except the labeling. The AXP813 is paired with the A83T, while the AXP818 is paired with the H8. This patch adds a dtsi file for all the common bindings for these two PMICs. Currently this is just listing all the regulator nodes. The regulators are initialized based on their device node names. In the future this would be expanded to include power supplies and GPIO controllers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sunxi: Restore EMAC changes (boards)Corentin Labbe2017-11-0210-0/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted. This patch restore all boards DT about dwmac-sun8i This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emacCorentin Labbe2017-11-021-4/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since dwmac-sun8i could use either an integrated PHY or an external PHY (which could be at same MDIO address), we need to represent this selection by a MDIO switch. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | arm: dts: sunxi: h3/h5: Restore EMAC changesCorentin Labbe2017-11-021-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted. This patch restore sunxi-h3-h5.dtsi This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | | Merge tag 'v4.14-next-dts32-2' of https://github.com/mbgg/linux-mediatek ↵Arnd Bergmann2017-11-073-14/+52
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/dt Pull "Mediatek: 32-bit DTS updates for v4.15" from Matthias Brugger: - mt7623 update nodes to binding description - mt2701 add display pwn nodes - mt2701 update audio node description * tag 'v4.14-next-dts32-2' of https://github.com/mbgg/linux-mediatek: arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node arm: dts: mediatek: update audio node for mt2701 and mt7623 arm: dts: mt2701: enable display pwm backlight arm: dts: mt2701: add pwm backlight device node
| | * | | arm: dts: mt7623: remove unused compatible string for pio nodeRyder Lee2017-11-021-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MT7623 has its own compatible in pinctrl driver so we don't need the backward compatible for it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
| | * | | arm: dts: mt7623: update usb related nodesRyder Lee2017-11-021-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current usb related nodes are out-of-date, so we make them be consistent with the binding documents. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
| | * | | arm: dts: mt7623: update crypto nodeRyder Lee2017-11-021-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates compatible string and clocks for the crypto node. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
| | * | | arm: dts: mediatek: update audio node for mt2701 and mt7623Ryder Lee2017-10-192-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds interrupt-names property in audio node so that binding can be agnostic of the IRQ order. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
| | * | | arm: dts: mt2701: enable display pwm backlightWeiqing Kong2017-10-191-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds board related config for MT2701 pwm backlight. Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
| | * | | arm: dts: mt2701: add pwm backlight device nodeWeiqing Kong2017-10-191-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the device node for MT2701 pwm backlight. Signed-off-by: Weiqing Kong <weiqing.kong@mediatek.com> Signed-off-by: Erin Lo <erin.lo@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
| * | | | Merge tag 'actions-arm-dt-for-4.15' of ↵Arnd Bergmann2017-11-074-0/+55
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt Pull "Actions Semi ARM based SoC DT for v4.15" from Andreas Färber: This updates the Guitar board DT with a clock node for the debug UART and adds a new DT for the CubieBoard6. It also updates the S500 DT with CPU power domains. * tag 'actions-arm-dt-for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
| | * | | | ARM: dts: owl-s500: Add CubieBoard6Andreas Färber2017-11-042-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a Device Tree for Cubietech CubieBoard6. Cc: support@cubietech.com Signed-off-by: Andreas Färber <afaerber@suse.de>
| | * | | | ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clockAndreas Färber2017-11-041-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a fixed-clock for baudrate 115200. Signed-off-by: Andreas Färber <afaerber@suse.de>
| | * | | | ARM: dts: owl-s500: Set power domains for CPU2 and CPU3Andreas Färber2017-11-041-0/+3
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | CPU2 has its own power domain PD_CPU2, and CPU3 has PD_CPU3. Signed-off-by: Andreas Färber <afaerber@suse.de>
| * | | | Merge tag 'amlogic-dt64' of ↵Arnd Bergmann2017-10-302-2/+2
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit platforms: DT updates for v4.15" from Kevin Hilman: - new SoC support: A113D - new boards: Tronsmart Vega S96, Khadas vim2 - reserved memory fixups - gpio-names cleanups - MMC cleanups, enable high-speed modes - misc cleanups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-axg: add initial A113D SoC DT support dt-bindings: arm: amlogic: Add Meson AXG binding ARM64: dts: meson-gx: remove unnecessary uart compatible ARM64: dts: meson-gx: remove unnecessary clocks properties ARM64: dts: meson-gxl: Add alternate ARM Trusted Firmware reserved memory zone ARM64: dts: meson-gxm: enable HS400 on the vim2 ARM64: dts: meson-gxbb-nexbox-a95x: Enable USB Nodes dt-bindings: arm: amlogic: Add Tronsmart Vega S96 binding ARM64: dts: meson-gxm: Add Vega S96 board ARM64: dts: meson-gxm: Add support for Khadas VIM2 ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins ARM64: dts: meson-gxl: adjust libretech-cc gpio-line-names ARM64: dts: meson-gxl: adjust kvim gpio-line-names ARM64: dts: meson-gxbb: adjust odroid-c2 gpio-line-names ARM64: dts: meson-gxbb: adjust nanopi-k2 gpio-line-names ARM64: dts: meson-gx: adjust gpio-ranges for TEST_N ARM64: dts: meson-gx: remove gpio offset ARM: dts: meson8: remove gpio offset ARM64: dts: meson-gxl-libretech-cc: enable internal phy leds ARM64: dts: meson-gxl-libretech-cc: enable saradc
| | * | | | ARM: dts: meson8: remove gpio offsetJerome Brunet2017-10-122-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove pin offset on the AO controller. meson pinctrl no longer has this quirk Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
| * | | | | Merge tag 'amlogic-dt-2' of ↵Arnd Bergmann2017-10-304-0/+88
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 32-bit DT updates for v4.15, round 2" from Kevin Hilman: - enable new GPIO IRQ controller - add efuse node * tag 'amlogic-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: add the efuse node ARM: dts: meson8b: enable gpio interrupt controller ARM: dts: meson8b: add support for booting the secondary CPU cores ARM: dts: meson8: add support for booting the secondary CPU cores
| | * | | | | ARM: dts: meson: add the efuse nodeMartin Blumenstingl2017-10-294-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Meson6, Meson8 and Meson8b use a similar IP block which has access to 512 bytes of efuse data. During SoC manufacturing some calibration settings for the CVBS connector and the internal temperature sensor are written to this efuse. On some boards it additionally stores for example the MAC addresses. The efuse is enabled on Meson8 and Meson8b but kept disabled on Meson6 since we do not have a clock driver there (which is required to read data from the efuse). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
| | * | | | | ARM: dts: meson8b: enable gpio interrupt controllerJerome Brunet2017-10-292-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add gpio interrupt controller node to the meson8b boards Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
| | * | | | | ARM: dts: meson8b: add support for booting the secondary CPU coresCarlo Caione2017-10-291-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Booting the secondary CPU cores involves the following nodes/devices: - SCU (Snoop-Control-Unit, for which we already have a DT node) - a reset line for each CPU core, provided by the reset-controller which is built into the clock-controller - the PMU (power management unit) which controls the power of the CPU cores - a range in the SRAM specifically reserved for booting secondary CPU cores - the "enable-method" which activates booting the secondary CPU cores This adds all required nodes and properties to boot the secondary CPU cores. Signed-off-by: Carlo Caione <carlo@caione.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
| | * | | | | ARM: dts: meson8: add support for booting the secondary CPU coresMartin Blumenstingl2017-10-291-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Booting the secondary CPU cores involves the following nodes/devices: - SCU (Snoop-Control-Unit, for which we already have a DT node) - a reset line for each CPU core, provided by the reset-controller which is built into the clock-controller - the PMU (power management unit) which controls the power of the CPU cores - a range in the SRAM specifically reserved for booting secondary CPU cores - the "enable-method" which activates booting the secondary CPU cores This adds all required nodes and properties to boot the secondary CPU cores. Suggested-by: Carlo Caione <carlo@caione.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
| * | | | | | Merge tag 'at91-ab-4.15-dt' of ↵Arnd Bergmann2017-10-305-37/+66
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Pull" ARM: at91: DT for 4.15" from Alexandre Belloni: - sama5d2 xplained: add charger and SD card power supply - sama5d27_som1_ek: many adjustments - at91sam9x25ek: add pwm0 and can1 * tag 'at91-ab-4.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: at91sam9x5ek: use DMA for USART0 ARM: dts: at91: at91sam9x25ek: add pwm0 ARM: dts: at91: at91sam9x25ek: add CAN1 interface ARM: dts: at91: sama5d2_xplained: remove pull-up on SD/MMC lines ARM: dts: at91: sama5d2_xplained: add pinmuxing for pwm0 ARM: dts: at91: sama5d2_xplained: set PB_USER as wakeup source ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0 ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0 ARM: dts: at91: sama5d27_som1_ek: add aliases for i2c ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup source ARM: dts: at91: sama5d27_som1_ek: update serial aliases ARM: dts: at91: sama5d27_som1_ek: enable i2c2 ARM: dts: at91: sama5d27_som1_ek: add disabled status ARM: dts: at91: usb_a9g20: fix rtc node ARM: dts: at91: sama5d2 Xplained: Describe the SD card power supply ARM: dts: at91: sama5d2_xplained: Add charger node
| | * | | | | | ARM: dts: at91: at91sam9x5ek: use DMA for USART0Nicolas Ferre2017-10-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use DMA for USART0 (which is used as ttyS1) as we have enough channels and to show how to specify DMA use with serial nodes. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | | | | | ARM: dts: at91: at91sam9x25ek: add pwm0Nicolas Ferre2017-10-101-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the PWM0 interface and one output of channel 0 (on PC10) on this headless board. The output conflicts with LCD and ISI, so only enable it for this particular board of the series (ISI is enabled on at91sam9g25ek, as an example but we can do the other way around). Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-13 12:17:07 +0100