summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1 (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP1: ams-delta: fix deferred_fiq handlerJanusz Krzysztofik2018-05-031-13/+15
| | | | | | | | | | | | | | | | The deferred_fiq handler used to limit hardware operations to IRQ unmask only, relying on gpio-omap assigned handler performing the ACKs. Since commit 80ac93c27441 ("gpio: omap: Fix lost edge interrupts") this is no longer the case as handle_edge_irq() has been replaced with handle_simmple_irq() which doesn't touch the hardware. Add single ACK operation per each active IRQ pin to the handler. While being at it, move unmask operation out of irq_counter loop so it is also called only once for each active IRQ pin. Fixes: 80ac93c27441 ("gpio: omap: Fix lost edge interrupts") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'omap-for-v4.17/timer-signed' of ↵Arnd Bergmann2018-03-073-2/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "Move omap timer to drivers for 4.17" from Tony Lindgren: This series from Keerthy and Ladislav Michl move omap dmtimer code to drivers. As we don't want to export custom timer functions to random drivers, we also need to update the related PWM driver to pass the timer specific functions in platform data. Note that this series is based on a merge of omap1 specific timer fix and omap2+ platform data clean-up to keep things working and make the move a bit simpler. * tag 'omap-for-v4.17/timer-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: clocksource: timer-ti-dm: Check prescaler value clocksource: timer-ti-dm: Consolidate set source clocksource: timer-ti-dm: Make unexported functions static ARM: OMAP: pdata-quirks: Remove unused timer pdata pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops clocksource: timer-ti-dm: Hook device platform data if not already assigned clocksource: timer-ti-dm: Populate the timer ops to the pdata clocksource: timer-ti-dm: Add timer ops to the platform data structure ARM: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource clocksource: timer-ti-dm: Replace architecture ARM: OMAP: Move dmtimer.h out of plat-omap ARM: OMAP: timer: Wrap the inline functions under OMAP2PLUS define ARM: OMAP: dmtimer: Remove all the exports ARM: OMAP: Fix dmtimer init for omap1
| * ARM: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksourceKeerthy2018-02-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the dmtimer driver out of plat-omap to clocksource. So that non-omap devices also could use this. No Code changes done to the driver file only renamed to timer-ti-dm.c. Also removed the config dependencies for OMAP_DM_TIMER. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Ladislav Michl <ladis@linux-mips.org> [tony@atomide.com: add select omap_dm_timer for omap16xx] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * ARM: OMAP: Move dmtimer.h out of plat-omapKeerthy2018-02-222-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The header file is currently under plat-omap directory under arch/omap. Move this out to an accessible place. No Code changes done to the header file and renamed to timer-ti-dm.h. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'omap-for-v4.17/soc-signed' of ↵Arnd Bergmann2018-03-073-4/+51
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "SoC changes for omaps for v4.17" from Tony Lindgren: This series is mostly a series from Suman Anna to remove now unused platform data that is now coming from device tree. This also make it a bit simpler to move the timer code to live under drivers in a separate series of patches. There are also few minor clean-ups for omap4 PM code. * tag 'omap-for-v4.17/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix typo for wakeup_ns_pa_addr ARM: OMAP2+: Use v7_invalidate_l1 in omap4_finish_suspend ARM: OMAP2+: Remove unused gpio header file references ARM: OMAP: Move plat/i2c.h into mach-omap1 folder ARM: OMAP2+: Cleanup omap_mcbsp_dev_attr and other legacy data ARM: OMAP2+: Cleanup omap2_spi_dev_attr and other legacy data ARM: OMAP2+: Cleanup omap_timer_capability_dev_attr usage ARM: OMAP2+: Cleanup omap_i2c_dev_attr usage ARM: OMAP2+: Cleanup omap_gpio_dev_attr usage ARM: OMAP2+: Include types.h directly for hwmod data
| * ARM: OMAP: Move plat/i2c.h into mach-omap1 folderSuman Anna2018-02-143-4/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current contents of plat/i2c.h are only relevant for OMAP1 platforms, as all the equivalent functions for OMAP2 has been dropped in commit 65fa3e719f36 ("ARM: OMAP2+: Remove legacy i2c.c platform init code"), and which has also moved the left-over code from plat-omap into mach-omap1. The hwmod is a concept only applicable for OMAP2 platforms, and the omap_i2c_reset() is already declared in mach-omap2/i2c.h. So, move the current plat/i2c.h header file into the mach-omap1 folder, and adjust the header usage accordingly. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP1: clock: Fix debugfs_create_*() usageGeert Uytterhoeven2018-02-141-3/+3
|/ | | | | | | | | | | | | | | | | When exposing data access through debugfs, the correct debugfs_create_*() functions must be used, depending on data type. Remove all casts from data pointers passed to debugfs_create_*() functions, as such casts prevent the compiler from flagging bugs. Correct all wrong usage: - clk.rate is unsigned long, not u32, - clk.flags is u8, not u32, which exposed the successive clk.rate_offset and clk.src_offset fields. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'armsoc-soc' of ↵Linus Torvalds2017-11-1613-14/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Most of the commits are for defconfig changes, to enable newly added drivers or features that people have started using. For the changed lines lines, we have mostly cleanups, the affected platforms are OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions. The largest single change is the introduction of the TI "sysc" bus driver, with the intention of cleaning up more legacy code. Two new SoC platforms get added this time: - Allwinner R40 is a modernized version of the A20 chip, now with a Quad-Core ARM Cortex-A7. According to the manufacturer, it is intended for "Smart Hardware" - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of chips meant for managed gigabit ethernet switches, based around a Cortex-A9 CPU. Finally, we gain SMP support for two platforms: Renesas R-Car E2 and Amlogic Meson8/8b, which were previously added but only supported uniprocessor operation" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER arm64: defconfig: enable CONFIG_GPIO_UNIPHIER ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init() ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init() ARM: defconfig: select the right SX150X driver arm64: defconfig: Enable QCOM_IOMMU arm64: Add ThunderX drivers to defconfig arm64: defconfig: Enable Tegra PCI controller cpufreq: imx6q: Move speed grading check to cpufreq driver arm64: defconfig: re-enable Qualcomm DB410c USB ARM: configs: stm32: Add MDMA support in STM32 defconfig ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1 bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove bus: ti-sysc: mark PM functions as __maybe_unused ...
| * ARM: omap1: add const and initconst to omap_lcd_configBhumika Goyal2017-10-0213-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make these const as they are only passed to a const argument of the function omapfb_set_lcd_config. Also, replace __initdata with __initconst to avoid section conflict error. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct omap_lcd_config s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; position ref.p; @@ omapfb_set_lcd_config(&s@p,...) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct omap_lcd_config s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-027-0/+7
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtdLinus Torvalds2017-09-095-5/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Boris Brezillon: "General updates: - Constify pci_device_id in various drivers - Constify device_type - Remove pad control code from the Gemini driver - Use %pOF to print OF node full_name - Various fixes in the physmap_of driver - Remove unused vars in mtdswap - Check devm_kzalloc() return value in the spear_smi driver - Check clk_prepare_enable() return code in the st_spi_fsm driver - Create per MTD device debugfs enties NAND updates, from Boris Brezillon: - Fix memory leaks in the core - Remove unused NAND locking support - Rename nand.h into rawnand.h (preparing support for spi NANDs) - Use NAND_MAX_ID_LEN where appropriate - Fix support for 20nm Hynix chips - Fix support for Samsung and Hynix SLC NANDs - Various cleanup, improvements and fixes in the qcom driver - Fixes for bugs detected by various static code analysis tools - Fix mxc ooblayout definition - Add a new part_parsers to tmio and sharpsl platform data in order to define a custom list of partition parsers - Request the reset line in exclusive mode in the sunxi driver - Fix a build error in the orion-nand driver when compiled for ARMv4 - Allow 64-bit mvebu platforms to select the PXA3XX driver SPI NOR updates, from Cyrille Pitchen and Marek Vasut: - add support to the JEDEC JESD216B specification (SFDP tables). - add support to the Intel Denverton SPI flash controller. - fix error recovery for Spansion/Cypress SPI NOR memories. - fix 4-byte address management for the Aspeed SPI controller. - add support to some Microchip SST26 memory parts - remove unneeded pinctrl header Write a message for tag:" * tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits) mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized mtd: nand: make Samsung SLC NAND usable again mtd: nand: tmio: Register partitions using the parsers mfd: tmio: Add partition parsers platform data mtd: nand: sharpsl: Register partitions using the parsers mtd: nand: sharpsl: Add partition parsers platform data mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller mtd: nand: qcom: support for IPQ4019 QPIC NAND controller dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation dt-bindings: qcom_nandc: fix the ipq806x device tree example mtd: nand: qcom: support for different DEV_CMD register offsets mtd: nand: qcom: QPIC data descriptors handling mtd: nand: qcom: enable BAM or ADM mode mtd: nand: qcom: erased codeword detection configuration mtd: nand: qcom: support for read location registers mtd: nand: qcom: support for passing flags in DMA helper functions mtd: nand: qcom: add BAM DMA descriptor handling mtd: nand: qcom: allocate BAM transaction mtd: nand: qcom: DMA mapping support for register read buffer ...
| * Merge tag 'nand/for-4.14' of git://git.infradead.org/l2-mtd into mtd/nextBoris Brezillon2017-09-015-5/+5
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Boris: " This pull request contains the following core changes: * Fix memory leaks in the core * Remove unused NAND locking support * Rename nand.h into rawnand.h (preparing support for spi NANDs) * Use NAND_MAX_ID_LEN where appropriate * Fix support for 20nm Hynix chips * Fix support for Samsung and Hynix SLC NANDs and the following driver changes: * Various cleanup, improvements and fixes in the qcom driver * Fixes for bugs detected by various static code analysis tools * Fix mxc ooblayout definition * Add a new part_parsers to tmio and sharpsl platform data in order to define a custom list of partition parsers * Request the reset line in exclusive mode in the sunxi driver * Fix a build error in the orion-nand driver when compiled for ARMv4 * Allow 64-bit mvebu platforms to select the PXA3XX driver "
| | * mtd: nand: Rename nand.h into rawnand.hBoris Brezillon2017-08-135-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Peter Pan <peterpandong@micron.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Han Xu <han.xu@nxp.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
| | |
| \ \
| \ \
| \ \
*---. | | Merge branches 'ib-mfd-arm-i2c-4.14', 'ib-mfd-arm-usb-video-4.14', ↵Lee Jones2017-09-056-11/+15
|\ \ \| | | | | |/ | | |/| | | | | 'ib-mfd-hwmon-4.14', 'ib-mfd-iio-pwm-4.14', 'ib-mfd-input-rtc-4.14', 'ib-mfd-many-4.14' and 'ib-mfd-pinctrl-regulator-4.14' into ibs-for-mfd-merged
| | | * ARM: omap1: avoid unused variable warningArnd Bergmann2017-07-271-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The osk_mistral_init() contains code that is only compiled when CONFIG_PM is set, but it uses a variable that is declared outside of the #ifdef: arch/arm/mach-omap1/board-osk.c: In function 'osk_mistral_init': arch/arm/mach-omap1/board-osk.c:513:7: warning: unused variable 'ret' [-Wunused-variable] This removes the #ifdef around the user of the variable, make it always used. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Tony Lindgren <tony@atomide.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
| | | * ARM: omap1/ams-delta: warn about failed regulator enableArnd Bergmann2017-07-271-2/+10
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The modem pm handler in the ams-delta board uses regulator_enable() but does not check for a successful return code: board-ams-delta.c:521:3: error: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Werror=unused-result] It is not easy to propagate that return code to the callers in uart_configure_port/uart_suspend_port/uart_resume_port, unless we change all UART drivers, and it is unclear what those would do with the return code. Instead, this patch uses a runtime warning to replace the compiletime warning. I have checked that the regulator in question is hardcoded to a fixed-voltage GPIO regulator, and that should never fail to get enabled if I understand the code right. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Link: https://patchwork.kernel.org/patch/8391981/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * / mfd: tps65010: Move header file out of I2C realmWolfram Sang2017-08-155-5/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* / mfd: retu: Drop -mfd suffix from I2C device ID nameJavier Martinez Canillas2017-07-181-2/+2
|/ | | | | | | | | | | | | | It's not correct to encode the subsystem in the I2C device name, so drop the -mfd suffix. To maintain bisect-ability, change driver and platform code / DTS users in the same patch. Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* ARM: OMAP1: Fix a typo in a comment lineMarkus Elfring2017-06-071-1/+1
| | | | | | | Adjust a line in this description for the software module. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: Delete an error message for a failed memory allocation in ↵Markus Elfring2017-06-071-2/+0
| | | | | | | | | | | | omap1_dm_timer_init() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: DMA: Delete an unnecessary return statement in omap1_show_dma_caps()Markus Elfring2017-06-071-1/+0
| | | | | | | | | | | The script "checkpatch.pl" pointed information out like the following. WARNING: void function return statements are not generally useful Thus remove such a statement in the affected function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: DMA: Delete an error message for a failed memory allocation in ↵Markus Elfring2017-06-071-2/+0
| | | | | | | | | | | | omap1_system_dma_init() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: DMA: Improve a size determination in omap1_system_dma_init()Markus Elfring2017-06-071-1/+1
| | | | | | | | | Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: PM: Drop useless checks for PM_SUSPEND_STANDBYGeert Uytterhoeven2017-03-061-1/+0
| | | | | | | | | As OMAP uses the standard suspend_valid_only_mem() for its platform_suspend_ops.valid() callback, its platform_suspend_ops.enter() callback will never be called with state equal to PM_SUSPEND_STANDBY. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'armsoc-soc' of ↵Linus Torvalds2017-02-244-51/+24
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e. C code changes for SoC platforms. This release cycle the diffstat is quite nice, in that we're removing 3x the amount of code that's being added. The main reason for this is that there's a removal of camera drivers for Freescale i.MX chips (driver was removed so the device registration isn't needed any more). There's also removal of display initialization code for OMAP that is no longer needed. The rest are mostly minor tweaks and cleanups; constification on Samsung platforms, cleanup of ux500 platform data, purge of other unused platform data/device seutp on i.MX and other good stuff. New SoC support this cycle is for two Allwinner platforms, H2+ and V3s" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: ux500: remove deleted file from Makefile ARM: ep93xx: Disable TS-72xx watchdog before uncompressing ARM: ux500: cut some platform data MAINTAINERS: Update for the current location of the bcm2835 tree. ARM: davinci: remove BUG_ON() from da850_register_sata() ARM: davinci: da850: model the SATA refclk ARM: davinci: da850: add con_id for the SATA clock ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA arm: mvebu: support for SMP on 98DX3336 SoC dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property soc: dove: constify reset_control_ops structures ARM: mv78xx0: fix possible PCI buffer overflow MAINTAINERS: transfer maintainership for the EZX platform ARM: shmobile: rcar-gen2: Add more register documentation ARM: tegra: paz00: Fix __initdata placement ARM: OMAP: clock: Remove unused mpurate cmdline option ARM: davinci: add skeleton for pdata-quirks arm: sunxi: add support for V3s SoC ARM: OMAP2+: omap_hwmod: Add support for earlycon arm: hisi: drop extern hip01_cpu_die ...
| * ARM: OMAP: clock: Remove unused mpurate cmdline optionAndrew Murray2017-01-242-22/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'mpurate' option, historically used for specifying an initial MPU rate at boot, no longer has any effect due to the supporting code being removed as it was 'wrong and dangerous' [1]. This patch removes the remaining dead code associated with the __setup macros to avoid confusion and reduce bloat. [1] https://patchwork.kernel.org/patch/5954631/ Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * ARM: OMAP1: USB: delete redundant CPU class checksAaro Koskinen2017-01-051-15/+12
| | | | | | | | | | | | | | | | Delete redundant CPU class checks. This code is only used on OMAP1 nowadays. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * ARM: OMAP1: USB: make omap_otg_init() staticAaro Koskinen2017-01-052-4/+2
| | | | | | | | | | | | | | Make omap_otg_init() static. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * ARM: OMAP1: USB: tidy up logging outputAaro Koskinen2017-01-051-10/+10
| | | | | | | | | | | | | | KERN_CONT/pr_cont is now required to continue log messages, use that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP1: DMA: Correct the number of logical channelsPeter Ujfalusi2017-01-061-9/+7
|/ | | | | | | | | | | | | | | | | OMAP1510, OMAP5910 and OMAP310 have only 9 logical channels. OMAP1610, OMAP5912, OMAP1710, OMAP730, and OMAP850 have 16 logical channels available. The wired 17 for the lch_count must have been used to cover the 16 + 1 dedicated LCD channel, in reality we can only use 9 or 16 channels. The d->chan_count is not used by the omap-dma stack, so we can skip the setup. chan_count was configured to the number of logical channels and not the actual number of physical channels anyways. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Remove legacy mux codeTony Lindgren2016-11-101-0/+26
| | | | | | | | | | | All the boards booting with device tree use drivers/pinctrl-single.c instead. Note that mach-omap1 is still using the legacy mux, so let's move the related Kconfig options from plat-omap to mach-omap1. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Remove legacy i2c.c platform init codeTony Lindgren2016-11-101-0/+83
| | | | | | | | | | We can now initialize I2C for mach-omap2 using device tree. And we can move the remaining code in plat-omap/i2c.c into mach-omap1/i2c.c. Note that we cannot remove some of the I2C bus reset functions as they are being used by hwmod code. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas2016-08-2613-22/+22
| | | | | | | | | | | The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'armsoc-soc' of ↵Linus Torvalds2016-08-022-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Improved and new platform support for various SoCs: New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 Improvements: - convert clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: davinci: fix build break because of undeclared dm365_evm_snd_data ARM: s3c64xx: smartq: Avoid sparse warnings ARM: sti: Implement dummy L2 cache's write_sec ARM: STi: Update machine _namestr to be more generic. arm: meson: explicitly select clk drivers ARM: tango: add Suspend-to-RAM support ARM: hisi: consolidate the hisilicon machine entries ARM: tango: fix CONFIG_HOTPLUG_CPU=n build MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry MAINTAINERS: Update BCM63XX entry MAINTAINERS: Add NS2 entry MAINTAINERS: Fix nsp false-positives MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs ARM: clps711x: Switch to MULTIPLATFORM ARM: clps711x: Remove boards support ARM: clps711x: Add basic DT support ARM: clps711x: Reduce static map size ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu ARM: oxnas: Change OX810SE default driver config ...
| * ARM: OMAP1: Fix typo in mtd-xip.hAndrea Gelmini2016-06-101-1/+1
| | | | | | | | | | Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * ARM: OMAP1: Fix typo in fiq.cAndrea Gelmini2016-06-101-1/+1
| | | | | | | | | | Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: use the new LED disk activity triggerStephan Linz2016-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | - dts: rename 'ide-disk' to 'disk-activity' - platform: rename 'ide-disk' to 'disk-activity' - defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK' Signed-off-by: Stephan Linz <linz@li-pro.net> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
* | ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQJanusz Krzysztofik2016-06-173-5/+8
|/ | | | | | | | | | | | After OMAP1 IRQ definitions have been changed by commit 685e2d08c54b ("ARM: OMAP1: Change interrupt numbering for sparse IRQ") introduced in v4.2, ams-delta FIQ handler which depends on them no longer works as expected. Fix it. Created and tested on Amstrad Delta against Linux-4.7-rc3 Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'armsoc-soc' of ↵Linus Torvalds2016-03-201-0/+45
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Newly added support for additional SoCs: - Axis Artpec-6 SoC family - Allwinner A83T SoC - Mediatek MT7623 - NXP i.MX6QP SoC - ST Microelectronics stm32f469 microcontroller New features: - SMP support for Mediatek mt2701 - Big-endian support for NXP i.MX - DaVinci now uses the new DMA engine dma_slave_map - OMAP now uses the new DMA engine dma_slave_map - earlyprintk support for palmchip uart on mach-tango - delay timer support for orion Other: - Exynos PMU driver moved out to drivers/soc/ - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: uniphier: rework SMP code to support new System Bus binding ARM: uniphier: add missing of_node_put() ARM: at91: avoid defining CONFIG_* symbols in source code ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1 ARM: imx: Make reset_control_ops const ARM: imx: Do L2 errata only if the L2 cache isn't enabled ARM: imx: select ARM_CPU_SUSPEND only for imx6 dmaengine: pxa_dma: fix the maximum requestor line ARM: alpine: select the Alpine MSI controller driver ARM: pxa: add the number of DMA requestor lines dmaengine: mmp-pdma: add number of requestors dma: mmp_pdma: Add the #dma-requests DT property documentation ARM: OMAP2+: Add rtc hwmod configuration for ti81xx ARM: s3c24xx: Avoid warning for inb/outb ARM: zynq: Move early printk virtual address to vmalloc area ARM: DRA7: hwmod: Add custom reset handler for PCIeSS ARM: SAMSUNG: Remove unused register offset definition ARM: EXYNOS: Cleanup header files inclusion drivers: soc: samsung: Enable COMPILE_TEST MAINTAINERS: Add maintainers entry for drivers/soc/samsung ...
| * ARM: OMAP1: DMA: Provide dma_slave_map to omap-dmaPeter Ujfalusi2016-02-221-0/+45
| | | | | | | | | | | | | | | | | | | | OMAP1 can not boot in DT mode and to be able to clean up the driver regarding to the dmaengine API use (switching to the new API) the device/slave -> filter mapping needs to be provided to the omap-dma driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: 8532/1: uncompress: mark putc as inlineArnd Bergmann2016-02-221-1/+1
|/ | | | | | | | | | | | | | | | | | | When CONFIG_DEBUG_ICEDCC is set, we don't use the platform specific putc() function, but use icedcc_putc() instead, so putc is unused and causes a compile time warning: In file included from ../arch/arm/boot/compressed/misc.c:28:0: arch/arm/mach-rpc/include/mach/uncompress.h:79:13: warning: 'putc' defined but not used [-Wunused-function] arch/arm/mach-w90x900/include/mach/uncompress.h:30:13: warning: 'putc' defined but not used [-Wunused-function] On most platforms, this does not happen, because putc is defined as 'static inline' so the compiler will automatically drop it when it's unused. This changes the remaining seven platforms to behave the same way. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge tag 'armsoc-soc' of ↵Linus Torvalds2016-01-211-19/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: tango: Fix UP build issues ARM: tango: pass ARM arch level for smc.S ARM: bcm2835: Add Kconfig support for bcm2836 ARM: OMAP2+: Add support for dm814x and dra62x usb ARM: OMAP2+: Add mmc hwmod entries for dm814x ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx ARM: OMAP2+: Fix SoC detection for dra62x j5-eco ARM: tango4: Initial platform support ARM: bcm2835: Add a compat string for bcm2836 machine probe dt-bindings: Add root properties for Raspberry Pi 2 ARM: imx: select SRC for i.MX7 ARM: uniphier: select PINCTRL ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: rockchip: enable support for RK3228 SoCs ARM: rockchip: use const and __initconst for rk3036 smp_operations ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER ARM: BCM: Add SMP support for Broadcom 4708 ARM: BCM: Add SMP support for Broadcom NSP ARM: BCM: Clean up SMP support for Broadcom Kona ...
| * ARM: OMAP1: Remove device creation for omap-pcm-audioPeter Ujfalusi2015-12-171-19/+0
| | | | | | | | | | | | | | | | The omap-pcm in ASoC is no longer a platform device. No need to create this device anymore. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds2016-01-2117-15/+15
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
| * | ARM: omap1: make headers more localArnd Bergmann2015-12-0117-15/+15
| |/ | | | | | | | | | | | | | | | | Some header files are never included outside of a mach-omap1 directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds2016-01-171-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
| * | gpio: generic: factor into gpio_chip structLinus Walleij2016-01-051-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge tag 'for-linus-20160112' of git://git.infradead.org/linux-mtdLinus Torvalds2016-01-131-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Brian Norris: "Generic MTD: - populate the MTD device 'of_node' field (and get a proper 'of_node' symlink in sysfs) This yielded some new helper functions, and changes across a variety of drivers - partitioning cleanups, to prepare for better device-tree based partitioning in the future Eliminate a lot of boilerplate for drivers that want to use OF-based partition parsing The DT bindings for this didn't settle yet, so most non-cleanup portions are deferred for a future release NAND: - embed a struct mtd_info inside struct nand_chip This is really long overdue; too many drivers have to do the same silly boilerplate to allocate and link up two "independent" structs, when in fact, everyone is assuming there is an exact 1:1 relationship between a NAND chips struct and its underlying MTD. This aids improved helpers and should make certain abstractions easier in the future. Also causes a lot of churn, helped along by some automated code transformations - add more core support for detecting (and "correcting") bitflips in erased pages; requires opt-in by drivers, but at least we kill a few bad implementations and hopefully stave off future ones - pxa3xx_nand: cleanups, a few fixes, and PM improvements - new JZ4780 NAND driver SPI NOR: - provide default erase function, for controllers that just want to send the SECTOR_ERASE command directly - fix some module auto-loading issues with device tree ("jedec,spi-nor") - error handling fixes - new Mediatek QSPI flash driver Other: - cfi: force valid geometry Kconfig (finally!) This one used to trip up randconfigs occasionally, since bots aren't deterred by big scary "advanced configuration" menus More? Probably. See the commit logs" * tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits) mtd: jz4780_nand: replace if/else blocks with switch/case mtd: nand: jz4780: Update ecc correction error codes mtd: nandsim: use nand_get_controller_data() mtd: jz4780_nand: remove useless mtd->priv = chip assignment staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers mtd: nand: make use of nand_set/get_controller_data() helpers ARM: make use of nand_set/get_controller_data() helpers mtd: nand: add helpers to access ->priv mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs mtd: nand: jz4740: remove custom 'erased check' implementation mtd: nand: diskonchip: remove custom 'erased check' implementation mtd: nand: davinci: remove custom 'erased check' implementation mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions mtd: nand: return consistent error codes in ecc.correct() implementations doc: dt: mtd: new binding for jz4780-{nand,bch} mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc mtd: spi-nor: wait until lock/unlock operations are ready mtd: tests: consolidate kmalloc/memset 0 call to kzalloc jffs2: use to_delayed_work mtd: nand: assign reasonable default name for NAND drivers ...
| * | ARM: nand: make use of mtd_to_nand() where appropriateBoris BREZILLON2015-12-081-1/+1
| |/ | | | | | | | | | | | | | | | | mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all ARM specific implementations to use this helper. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* / [media] include/media: move platform_data to linux/platform_data/mediaMauro Carvalho Chehab2015-11-171-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's not mix platform_data headers with the core headers. Instead, let's create a subdir at linux/platform_data and move the headers to that common place, adding it to MAINTAINERS. The headers were moved with: mkdir include/linux/platform_data/media/; git mv include/media/gpio-ir-recv.h include/media/ir-rx51.h include/media/mmp-camera.h include/media/omap1_camera.h include/media/omap4iss.h include/media/s5p_hdmi.h include/media/si4713.h include/media/sii9234.h include/media/smiapp.h include/media/soc_camera.h include/media/soc_camera_platform.h include/media/timb_radio.h include/media/timb_video.h include/linux/platform_data/media/ And the references fixed with this script: MAIN_DIR="linux/platform_data/" PREV_DIR="media/" DIRS="media/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-05 12:40:46 +0100