summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-omap3evm.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* OMAP3: Move common regulator configuration to twl-commonPeter Ujfalusi2011-07-041-43/+7
| | | | | | | | Some regulator config can be moved out from board files, since they are close to identical. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* OMAP3: Move common twl configuration to twl-commonPeter Ujfalusi2011-07-041-21/+3
| | | | | | | | | | Reduce the amount of duplicated code by moving the common configuration for twl4030/5030/tpsxx to the twl-common file. Use the omap3_pmic_get_config function from board files to properly configure the PMIC with the common fields. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'devel-timer' into devel-cleanupTony Lindgren2011-06-291-2/+2
|\
| * omap: Set separate timer init functions to avoid cpu_is_omap testsTony Lindgren2011-06-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed for the following patches so we can initialize the rest of the hardware timers later on. As with the init_irq calls, there's no need to do cpu_is_omap calls during the timer init as we only care about the major omap generation. This means that we can initialize the sys_timer with the .timer entries alone. Note that for now we just set stubs for the various sys_timer entries that will get populated in a later patch. The following patches will also remove the omap_dm_timer_init calls and change the init for the rest of the hardware timers to happen with an arch_initcall. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
| * omap: Use separate init_irq functions to avoid cpu_is_omap tests earlyTony Lindgren2011-06-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to remove cpu_is_omap calls from init_irq functions. There should not be any need for cpu_is_omap calls as at this point. During the timer init we only care about SoC generation, and not about subrevisions. The main reason for the patch is that we want to initialize only minimal omap specific code from the init_early call. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Kevin Hilman <khilman@ti.com>
* | omap: board-omap3evm: Fix compilation errorPeter Ujfalusi2011-06-291-2/+2
| | | | | | | | | | | | | | | | | | Fix compilation error introduced with 786b01a8c1db0c0decca55d660a2a3ebd7cfb26b (cleanup regulator supply definitions in mach-omap2). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Remove old-style supply.dev assignments common in hsmmc initOleg Drokin2011-06-141-4/+0
| | | | | | | | | | | | | | | | | | | | | | CC: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: Mike Rapoport <mike@compulab.co.il> CC: Nishant Kamat <nskamat@ti.com> CC: Steve Sakoman <steve@sakoman.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | cleanup regulator supply definitions in mach-omap2Oleg Drokin2011-06-141-19/+22
|/ | | | | | | | | | | | | | | to use REGULATOR_SUPPLY arrays. CC: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: Mike Rapoport <mike@compulab.co.il> CC: Nishant Kamat <nskamat@ti.com> CC: Steve Sakoman <steve@sakoman.com> CC: Felipe Balbi <balbi@ti.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> CC: peter.barada@logicpd.com Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap-for-linus' of ↵Linus Torvalds2011-05-261-198/+44
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (33 commits) OMAP3: PM: Boot message is not an error, and not helpful, remove it OMAP3: cpuidle: change the power domains modes determination logic OMAP3: cpuidle: code rework for improved readability OMAP3: cpuidle: re-organize the C-states data OMAP3: clean-up mach specific cpuidle data structures OMAP3 cpuidle: remove useless SDP specific timings usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled usb: otg: OMAP4430: Fixing the omap4430_phy_init function usb: musb: am35x: fix compile error when building am35x usb: musb: OMAP4430: Power down the PHY during board init omap: drop board-igep0030.c omap: igep0020: add support for IGEP3 omap: igep0020: minor refactoring omap: igep0020: name refactoring for future merge with IGEP3 omap: Remove support for omap2evm arm: omap2plus: GPIO cleanup omap: musb: introduce default board config omap: move detection of NAND CS to common-board-devices omap: use common initialization for PMIC i2c bus omap: consolidate touch screen initialization among different boards ...
| * arm: omap2plus: GPIO cleanupIgor Grinberg2011-05-121-71/+28
| | | | | | | | | | | | | | | | use gpio_request_<one|array>() instead of multiple gpiolib calls, remove unneeded variables, etc. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: use common initialization for PMIC i2c busMike Rapoport2011-05-031-18/+3
| | | | | | | | | | | | | | | | Introduce omap_pmic_init that registers i2c bus and PMIC device on that bus and add omap2/3/4 wrappers for common cases. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: consolidate touch screen initialization among different boardsMike Rapoport2011-05-031-49/+2
| | | | | | | | | | | | | | | | | | Add common-board-devices.c that will contain the code for peripheral devices initializatoin shared between multiple boards. Start small with touchscreen initialization. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: convert boards that use SMSC911x to use gpmc-smsc911xMike Rapoport2011-04-201-60/+11
| | | | | | | | | | | | | | | | | | | | Convert boards that use SMSC911x to use gpmc-smsc911x. Also allocate struct platform_device dynamically. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> [tony@atomide.com: folded in a fix from Igor Grindberg] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | OMAP: DSS2: Move panel-generic-dpi.h to include/video/Tomi Valkeinen2011-05-111-1/+1
| | | | | | | | | | | | | | | | arch/arm/plat-omap/include/plat/panel-generic-dpi.h is an include for the OMAP DSS panel driver for generic DPI displays. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | OMAP: DSS2: Move display.h to include/video/Tomi Valkeinen2011-05-111-1/+1
|/ | | | | | | arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS driver. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linuxPaul Mundt2011-03-221-5/+7
|\ | | | | | | | | | | | | Conflicts: arch/arm/mach-omap2/board-overo.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * OMAP2, 3: DSS2: DSI: create platform_driver, move init, exit to driverSenthilvadivu Guruswamy2011-03-111-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver for DSI is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. Also, vdds_dsi regulator handling is copied to dsi.c, since vdds_dsi regulator is needed by dpi_init() too. Board files are updated accordingly to add 2 instances of vdds_dsi regulator. DSI platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * OMAP2, 3: DSS2: VENC: create platform_driver, move init, exit to driverSenthilvadivu Guruswamy2011-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Hwmod adaptation design requires each of the DSS HW IP to be a platform driver. So a platform_driver for VENC is created and init exit methods are moved from core.c to its driver probe,remove. pdev member has to be maintained by its own drivers. Also, venc_vdda_dac reading is moved to venc.c. VENC platform driver is registered from inside omap_dss_probe, in the order desired. Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
* | Merge branch 'omap-for-linus' of ↵Linus Torvalds2011-03-181-38/+208
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
| *---. Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and ↵Tony Lindgren2011-03-031-6/+5
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'devel-hsmmc' into omap-for-linus Conflicts: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
| | | | * OMAP: hsmmc: Rename the device and driverKishore Kadiyala2011-03-011-1/+1
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modifying the device & driver name from "mmci-omap-hs" to "omap_hsmmc". Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Benoit Cousson<b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * omap: Remove unnecessary twl4030_codec_audio settings from board filesIlkka Koskinen2011-03-031-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | twl4030_codec_audio and twl4030_codec_vibra_data has unused field. In order to remove it, corresponding settings needs to be removed from board files. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * omap2+: Minimize board specific init_early callsTony Lindgren2011-02-251-2/+3
| | |/ | | | | | | | | | | | | | | | | | | We should only call init_common_infrastructure and init_common_devices from init_early. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * / omap: omap3evm: add support for the WL12xx WLAN module to the omap3evmEyal Reizer2011-03-011-10/+22
| |/ | | | | | | | | | | | | | | | | | | | | | | This patch is again current omap-for-linus branch Adds platform initialization for working with the WLAN module attached to the omap3evm. The patch includes MMC2 initialization, SDIO and control pins muxing and platform device registration. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * Merge branch 'for-tony' of git://gitorious.org/linux-omap-dss2/linux into ↵Tony Lindgren2011-02-231-17/+3
| |\ | | | | | | | | | | | | | | | | | | omap-for-linus Conflicts: arch/arm/mach-omap2/board-3430sdp.c
| | * OMAP2, 3: DSS2: board files: replace platform_device_register with ↵Senthilvadivu Guruswamy2011-02-231-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap_display_init() This patch updated board files to replace platform_device_register or platform_add_devices of DSS with omap_display_init(). This moves away registration of DSS from board files into a common place. Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| | * OMAP2, 3: DSS2: Use Regulator init with driver nameSenthilvadivu Guruswamy2011-02-231-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use driver name in regulator inits needed for display instead of using device structure name. Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
| * | OMAP3EVM: Set TSC wakeup option in pad configVaibhav Hiremath2011-02-171-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | Set OMAP_PIN_OFF_WAKEUPENABLE to enable the wake-up functionality from touchscreen controller. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | OMAP3EVM: Made backlight GPIO default state to offVaibhav Hiremath2011-02-171-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If you choose default output to DVI, the LCD backlight used to stay on, since panel->disable function never gets called. So, during init put backlight GPIO to off state and the driver code will decide which output to enable. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | AM/DM37x: DSS mux configuration for >Rev-B processor cardsVaibhav Hiremath2011-02-171-2/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support higher resolution (e.g 720P@60), on OMAP36x (AM/DM37x) DSS data bus has been muxed with sys_boot pins. DSS[18-23] => DSS[0-5] sys_boot[0,1 3-5] => DSS[18-23] EVM revision >=RevB adopt this mux changes, which is going to ship outside. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | OMAP3EVM: Add vio regulator supply required for ads7846 TSC driverVaibhav Hiremath2011-02-171-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add vio regulator supply, needed for ads7846 touchscreen controller driver. Tested on OMAP3 (ES3.1 Si) RevG version of EVM. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3evm: Change TWL related gpio API's to gpio*_cansleepVaibhav Hiremath2011-02-171-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since TWL GPIO's can go into sleep, and using normal gpio_get/set_value() API will lead to kernel dump (WARN_ON()). So replacing standard gpio_get/set_value() to gpio_get/set_value_cansleep(). Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Charulatha V <charu@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | OMAP3EVM: Reset the smsc911x ethernet controller in board_initVaibhav Hiremath2011-02-171-1/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With addition of hwmod support to gpio, the ethernet controller goes undetected for OMAP35xEVM. So explicitly assert the reset signal to ethernet controller smsc911x - - GPIO7 (>=RevG version of EVM's) - GPIO64 (<=RevD version of EVM's) Tested this patch on RevG version of EVM with ES3.1 Si. This patch is based on intial version from Charulatha V, reference to original discussion - http://www.mail-archive.com/linux-omap@vger.kernel.org/msg35784.html Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3evm: add support for the WL12xx WLAN module to the AM/DM3xx Evaluation ↵Eyal Reizer2011-02-171-0/+78
| |/ | | | | | | | | | | | | | | | | | | Module Adds platform initialization for working with the WLAN module attached to the evaluation module. The patch includes MMC2 initialization, SDIO and control pins muxing and platform device registration Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * ARM: OMAP2: use early init hookRussell King - ARM Linux2011-02-151-4/+4
| | | | | | | | | | | | | | | | Move non-mapping and non-irq initialization code out of .map_io and .init_irq respectively into the new init_early hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: omap: usb: Invoke usbhs core device initializationKeshava Munegowda2011-03-011-1/+1
| | | | | | | | | | | | | | | | The usbhs intialization is invoked by all omap3 and omap4 variant board files. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | arm: omap: usb: create common enums and structures for ehci and ohciKeshava Munegowda2011-03-011-7/+7
|/ | | | | | | | Create the ehci and ohci specific platform data structures. The port enum values are made common for both ehci and ohci. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* OMAP: use generic DPI panel driver in board filesBryan Wu2011-01-101-3/+9
| | | | | | | | | | | Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight control driver code which will be moved out later. Then we can use generic DPI driver for sharp_ls_panel. Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Acked-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
* OMAP2+: io: split omap2_init_common_hw()Paul Walmsley2010-12-221-1/+2
| | | | | | | | | | | | | | | | | | | | | Split omap2_init_common_hw() into two functions. The first, omap2_init_common_infrastructure(), initializes the hwmod code and data, the OMAP PM code, and the clock code and data. The second, omap2_init_common_devices(), handles any other early device initialization that, for whatever reason, has not been or cannot be moved to initcalls or early platform devices. This patch is required for the hwmod postsetup patch, which allows board files to change the state that hwmods should be placed into at the conclusion of the hwmod _setup() function. For example, for a board whose creators wish to ensure watchdog coverage across the entire kernel boot process, code to change the watchdog's postsetup state will be added in the board-*.c file between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
* Merge branch 'devel-gpio' into omap-for-linusTony Lindgren2010-12-101-1/+0
|\
| * OMAP: GPIO: Implement GPIO as a platform deviceVaradarajan, Charulatha2010-12-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement GPIO as a platform device. GPIO APIs are used in machine_init functions. Hence it is required to complete GPIO probe before board_init. Therefore GPIO device register and driver register are implemented as postcore_initcalls. omap_gpio_init() does nothing now and this function would be removed in the next patch as it's usage is spread across most of the board files. Inorder to convert GPIO as platform device, modifications are required in clockxxxx_data.c file for OMAP1 so that device names can be used to obtain clock instead of getting clocks by name/NULL ptr. Use runtime pm APIs (pm_runtime_put*/pm_runtime_get*) for enabling or disabling the clocks, modify sysconfig settings and remove usage of clock FW APIs. Note 1: Converting GPIO driver to use runtime PM APIs is not done as a separate patch because GPIO clock names are different for various OMAPs and are different for some of the banks in the same CPU. This would need usage of cpu_is checks and bank id checks while using clock FW APIs in the gpio driver. Hence while making GPIO a platform driver framework, PM runtime APIs are used directly. Note 2: While implementing GPIO as a platform device, pm runtime APIs are used as mentioned above and modification is not done in gpio's prepare for idle/ resume after idle functions. This would be done in the next patch series and GPIO driver would be made to use dev_pm_ops instead of sysdev_class in that series only. Due to the above, the GPIO driver implicitly relies on CM_AUTOIDLE = 1 on its iclk for power management to work, since the driver never disables its iclk. This would be taken care in the next patch series (see Note 3 below). Refer to http://www.mail-archive.com/linux-omap@vger.kernel.org/msg39112.html for more details. Note 3: only pm_runtime_get_sync is called in gpio's probe() and pm_runtime_put* is never called. This is to make the implementation similar to the existing GPIO code. Another patch series would be sent to correct this. In OMAP3 and OMAP4 gpio's debounce clocks are optional clocks. They are enabled/ disabled whenever required using clock framework APIs TODO: 1. Cleanup the GPIO driver. Use function pointers and register offest pointers instead of using hardcoded values 2. Remove all cpu_is_ checks and OMAP specific macros 3. Remove usage of gpio_bank array so that only instance specific information is used in driver code 4. Rename 'method'/ avoid it's usage 5. Fix the non-wakeup gpios handling for OMAP2430, OMAP3 & OMAP4 6. Modify gpio's prepare for idle/ resume after idle functions to use runtime pm implentation. Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Basak, Partha <p-basak2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: updated for bank specific revision and updated boards] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: mach-omap2: remove NULL board_mux from board filesAaro Koskinen2010-12-031-2/+0
|/ | | | | | | | | If CONFIG_OMAP_MUX is not enabled, we can define board_mux in the header file instead of forcing every single board to define it. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> [tony@atomide.com: updated for combined board-zoom files] Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap-for-linus' of ↵Linus Torvalds2010-10-251-4/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
| * OMAP3: Keypad: Fix incorrect type initializerManjunath Kondaiah G2010-10-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The keypad matrix variable declaration is not matching with structure variable keymap declared in keypad_matrix.h. Due to this, following sparse warnings are generated with omap3_defconfig. arch/arm/mach-omap2/board-devkit8000.c:223:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-devkit8000.c:223:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-devkit8000.c:223:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-ldp.c:107:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-ldp.c:107:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-ldp.c:107:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-omap3evm.c:472:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-omap3evm.c:472:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-omap3evm.c:472:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-3430sdp.c:114:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-3430sdp.c:114:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-3430sdp.c:114:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-rx51-peripherals.c:248:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-rx51-peripherals.c:248:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-rx51-peripherals.c:248:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-zoom-peripherals.c:88:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-zoom-peripherals.c:88:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-zoom-peripherals.c:88:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-cm-t35.c:568:14: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-cm-t35.c:568:14: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-cm-t35.c:568:14: got int static [toplevel] *<noident> arch/arm/mach-omap2/board-omap3stalker.c:415:13: warning: incorrect type in initializer (different signedness) arch/arm/mach-omap2/board-omap3stalker.c:415:13: expected unsigned int const [usertype] *keymap arch/arm/mach-omap2/board-omap3stalker.c:415:13: got int static [toplevel] *<noident> This patch modifies the variable keymap declaration as per declaration in matrix_keymap structure. Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-input@vger.kernel.org Cc: Dmitry Torokhov <dtor@mail.ru> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * OMAP: mach-omap2: Fix static declaration warningsManjunath Kondaiah G2010-10-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes sparse warnings due to non declaration of static structures and variables. Sparse warning logs fixed: arch/arm/mach-omap2/control.c:88:6: warning: symbol 'omap3_secure_ram_storage' was not declared. Should it be static? n arch/arm/mach-omap2/timer-gp.c:50:22: warning: symbol 'gptimer_wakeup' was not declared. Should it be static? arch/arm/mach-omap2/timer-gp.c:240:18: warning: symbol 'omap_timer' was not declared. Should it be static? arch/arm/mach-omap2/prcm.c:121:24: warning: symbol 'prcm_context' was not declared. Should it be static? arch/arm/mach-omap2/mux2420.c:510:29: warning: symbol 'omap2420_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux2430.c:589:29: warning: symbol 'omap2430_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:934:28: warning: symbol 'omap3_cus_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1080:29: warning: symbol 'omap3_cus_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1272:28: warning: symbol 'omap3_cbb_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1393:29: warning: symbol 'omap3_cbb_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1603:28: warning: symbol 'omap36xx_cbp_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1821:29: warning: symbol 'omap36xx_cbp_ball' was not declared. Should it be static? arch/arm/mach-omap2/pm-debug.c:165:15: warning: symbol 'pm_dbg_dir' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:587:30: warning: symbol 'ads7846_config' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:606:23: warning: symbol 'omap3evm_spi_board_info' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:46:25: warning: symbol 'rx51_sdrc_params' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:211:25: warning: symbol 'rx51_get_sdram_timings' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3touchbook.c:64:15: warning: symbol 'touchbook_revision' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:350:24: warning: symbol 'am3517_evm_dss_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3stalker.c:567:23: warning: symbol 'omap3stalker_spi_board_info' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: mmc: extended to pass host capabilities from board fileSukumar Ghorai2010-09-271-1/+2
| | | | | | | | | | | | | | | | | | wires variable is renamed, extended and this single variable to be used to pass the platform capabilities, e.g DDR mode. Also removed the hardcoded value was using as bus-width. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre2010-10-201-2/+0
|/ | | | | | | | | | | | | | | Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
* Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds2010-08-081-5/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (64 commits) OMAP: DSS2: OMAPFB: add support for FBIO_WAITFORVSYNC OMAP: DSS2: Replace strncmp() with sysfs_streq() in overlay_manager_store() OMAP: DSS2: Fix error path in omap_dsi_update() OMAP: DSS2: TDO35S: fix video signaling OMAP: DSS2: OMAPFB: Fix invalid bpp for PAL and NTSC modes OMAP: DSS2: OMAPFB: Fix probe error path OMAP3EVM: Replace vdvi regulator supply with vdds_dsi OMAP: DSS2: Remove extra return statement OMAP: DSS2: adjust YUV overlay width to be even OMAP: DSS2: OMAPFB: Fix sysfs mirror input check OMAP: DSS2: OMAPFB: Remove redundant color register range check OMAP: DSS2: OMAPFB: Remove redundant rotate range check OMAP: DSS2: OMAPFB: Check fb2display() return value OMAP: DSS2: Taal: Optimize enable_te, rotate, mirror when value unchanged OMAP: DSS2: DSI: detect unsupported update requests OMAP: DSS2: DSI: increase FIFO low threshold OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIO OMAP: DSS2: DSI: Remove BTA after set_max_rx_packet_size OMAP: DSS2: change manual update scaling setup OMAP: DSS2: DSI: use BTA to end the frame transfer ...
| * OMAP3EVM: Replace vdvi regulator supply with vdds_dsiVaibhav Hiremath2010-08-051-5/+2
| | | | | | | | | | | | | | | | | | With recent changes happened in OMAP2/3 DSS library for regulator interface, it is required to define DSI regulator supply, without this DSS (in turn Fbdev) fails to get regulator. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
* | omap3: introduce omap3_map_ioMike Rapoport2010-08-041-7/+1
| | | | | | | | | | | | | | | | | | | | Most OMAP3-based boards use exactly the same code for .map_io method in the machine_desc structure. This patch introduces omap3_map_io and updates board-* files to use it as .map_io method. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 15:40:41 +0100