summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-rx51-peripherals.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2+: Drop legacy board file for n900Tony Lindgren2016-07-111-1312/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's drop the last two remaining omap3 legacy boot board files. Let's only use the device tree based booting known to work for these two boards. We still have two omap3 boards booting in legacy mode in addition to device tree based booting. All the other ten or so omap2+ SoCs have been booting using device tree mode only for years now. This has allowed us to get rid of quite a bit of arch/arm/mach-omap2 related platform init code in favor of dts and driver changes. Pretty much the only remaining known users for omap3 legacy boot board files are Kevin's and Russell's boot test systems, and N900 kernel tree maintained by Pali and Ivaylo. And all of them are also supporting the device tree based booting. The legacy booting mode has been kept around mostly to verify against regressions. As there is still a slim chance of possible other uses of the mainline kernel for these boards, let's just drop the board files for v4.8, and let's not touch the related platform init code until around v4.9 time if no issues are found. This makes it trivial for us to add back the board files with a simple revert. Acked-By: Sebastian Reichel <sre@kernel.org> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ir-rx51: use hrtimer instead of dmtimerIvaylo Dimitrov2016-06-301-4/+0
| | | | | | | | | Drop dmtimer usage for pulse timer in favor of hrtimer. That allows removing PWM dmitimer platform data usage. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ir-rx51: use PWM framework instead of OMAP dmtimerIvaylo Dimitrov2016-06-301-1/+0
| | | | | | | | | | Convert driver to use PWM framework instead of calling dmtimer functions directly for PWM timer. Remove paragraph about writing to the Free Software Foundation's mailing address while at it. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51Tony Lindgren2016-04-281-2/+33
| | | | | | | | | | | | | | | | | | | | | | | Before we start removing omap3 legacy booting support, let's make n900 DT booting behave the same way for ir-rx51 as the legacy booting does. For now, we need to pass pdata to the ir-rx51 driver. This means that the n900 tree can move to using DT based booting without having to carry all the legacy platform data with it when it gets dropped from the mainline tree. Note that the ir-rx51 driver is currently disabled because of the dependency to !ARCH_MULTIPLATFORM. This will get sorted out later with the help of drivers/pwm/pwm-omap-dmtimer.c. But first we need to add chained IRQ support to dmtimer code to avoid introducing new custom frameworks. So let's just pass the necessary dmtimer functions to ir-rx51 so we can get it working in the following patch. Cc: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'armsoc-soc' of ↵Linus Torvalds2016-01-211-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Updates for new platform support: - New platform: Tango4 from Sigma Designs. - Broadcom BCM2836 (Raspberry Pi 2 SoC) - Enable cpufreq on Freescale i.MX7D - Rockchip: SMP support for rk3036, general support for rk3228 - SMP support on Broadcom Kona and NSP - Cleanups for OMAP removing legacy IOMMU data + a bunch of misc fixes and tweaks for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: tango: Fix UP build issues ARM: tango: pass ARM arch level for smc.S ARM: bcm2835: Add Kconfig support for bcm2836 ARM: OMAP2+: Add support for dm814x and dra62x usb ARM: OMAP2+: Add mmc hwmod entries for dm814x ARM: OMAP2+: Update 81xx clock and power domains for default, active and sgx ARM: OMAP2+: Fix SoC detection for dra62x j5-eco ARM: tango4: Initial platform support ARM: bcm2835: Add a compat string for bcm2836 machine probe dt-bindings: Add root properties for Raspberry Pi 2 ARM: imx: select SRC for i.MX7 ARM: uniphier: select PINCTRL ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: rockchip: enable support for RK3228 SoCs ARM: rockchip: use const and __initconst for rk3036 smp_operations ARM: zynq: Select ARCH_HAS_RESET_CONTROLLER ARM: BCM: Add SMP support for Broadcom 4708 ARM: BCM: Add SMP support for Broadcom NSP ARM: BCM: Clean up SMP support for Broadcom Kona ...
| * ARM: OMAP: RX-51: fix a typo in log writingAaro Koskinen2015-11-301-1/+1
| | | | | | | | | | | | | | Fix a typo when registering HW RNG. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | [media] include/media: move platform_data to linux/platform_data/mediaMauro Carvalho Chehab2015-11-171-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's not mix platform_data headers with the core headers. Instead, let's create a subdir at linux/platform_data and move the headers to that common place, adding it to MAINTAINERS. The headers were moved with: mkdir include/linux/platform_data/media/; git mv include/media/gpio-ir-recv.h include/media/ir-rx51.h include/media/mmp-camera.h include/media/omap1_camera.h include/media/omap4iss.h include/media/s5p_hdmi.h include/media/si4713.h include/media/sii9234.h include/media/smiapp.h include/media/soc_camera.h include/media/soc_camera_platform.h include/media/timb_radio.h include/media/timb_video.h include/linux/platform_data/media/ And the references fixed with this script: MAIN_DIR="linux/platform_data/" PREV_DIR="media/" DIRS="media/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
* Merge tag 'media/v3.19-rc1' of ↵Linus Torvalds2014-12-111-38/+33
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Two new dvb frontend drivers: mn88472 and mn88473 - A new driver for some PCIe DVBSky cards - A new remote controller driver: meson-ir - One LIRC staging driver got rewritten and promoted to mainstream: igorplugusb - A new tuner driver (m88rs6000t) - The old omap2 media driver got removed from staging. This driver uses an old DMA API and it is likely broken on recent kernels. Nobody cared enough to fix it - Media bus format moved to a separate header, as DRM will also use the definitions there - mem2mem_testdev were renamed to vim2m, in order to use the same naming convention taken by the other virtual test driver (vivid) - Added a new driver for coda SoC (coda-jpeg) - The cx88 driver got converted to use videobuf2 core - Make DMABUF export buffer to work with DMA Scatter/Gather and Vmalloc cores - Lots of other fixes, improvements and cleanups on the drivers. * tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (384 commits) [media] mn88473: One function call less in mn88473_init() after error [media] mn88473: Remove uneeded check before release_firmware() [media] lirc_zilog: Deletion of unnecessary checks before vfree() [media] MAINTAINERS: Add myself as img-ir maintainer [media] img-ir: Don't set driver's module owner [media] img-ir: Depend on METAG or MIPS or COMPILE_TEST [media] img-ir/hw: Drop [un]register_decoder declarations [media] img-ir/hw: Fix potential deadlock stopping timer [media] img-ir/hw: Always read data to clear buffer [media] redrat3: ensure dma is setup properly [media] ddbridge: remove unneeded check before dvb_unregister_device() [media] si2157: One function call less in si2157_init() after error [media] tuners: remove uneeded checks before release_firmware() [media] arm: omap2: rx51-peripherals: fix build warning [media] stv090x: add an extra protetion against buffer overflow [media] stv090x: Remove an unreachable code [media] stv090x: Some whitespace cleanups [media] em28xx: checkpatch cleanup: whitespaces/new lines cleanups [media] si2168: add support for firmware files in new format [media] si2168: debug printout for firmware version ...
| * [media] arm: omap2: rx51-peripherals: fix build warningFelipe Balbi2014-12-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 68a3c0433077 ([media] ARM: OMAP2: RX-51: update si4713 platform data) updated board-rx51-peripherals.c so that si4713 could be easily used on DT boot, but it ended up introducing a build warning whenever si4713 isn't enabled. This patches fixes that warning: arch/arm/mach-omap2/board-rx51-peripherals.c:1000:36: warning: \ ‘rx51_si4713_platform_data’ defined but not used [-Wunused-variable] static struct si4713_platform_data rx51_si4713_platform_data = { Cc: Sebastian Reichel <sre@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] ARM: OMAP2: RX-51: update si4713 platform dataSebastian Reichel2014-11-141-38/+31
| | | | | | | | | | | | | | | | | | | | This updates platform data related to Si4713, which has been updated to be compatible with DT interface. Signed-off-by: Sebastian Reichel <sre@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | Merge tag 'omap-gpmc-for-linus' of ↵Linus Torvalds2014-12-101-31/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC/OMAP GPMC driver cleanup and move from Arnd Bergmann: "The GPMC driver has traditionally been considered a part of the OMAP platform code and tightly interweaved with some of the boards. With this cleanup, it has finally come to the point where it makes sense to move it out of arch/arm into drivers/memory, where we already have other drivers for similar hardware. The cleanups are still ongoing, with the goal of eventually having a standalone driver that does not require an interface to architecture code. This is a separate branch because of dependencies on multiple other branches, and to keep the drivers changes separate from the normal cleanups" * tag 'omap-gpmc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: memory: gpmc: Move omap gpmc code to live under drivers ARM: OMAP2+: Move GPMC initcall to devices.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header ARM: OMAP2+: Remove unnecesary include in GPMC driver ARM: OMAP2+: Drop board file for 3430sdp ARM: OMAP2+: Drop board file for ti8168evm ARM: OMAP2+: Drop legacy code for gpmc-smc91x.c ARM: OMAP2+: Require proper GPMC timings for devices ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select ARM: OMAP2+: gpmc: Sanity check GPMC fck on probe ARM: OMAP2+: gpmc: Keep Chip Select disabled while configuring it ARM: OMAP2+: gpmc: Always enable A26-A11 for non NAND devices ARM: OMAP2+: gpmc: Error out if timings fail in gpmc_probe_generic_child() ARM: OMAP2+: gpmc: Print error message in set_gpmc_timing_reg()
| * | ARM: OMAP2+: Prepare to move GPMC to drivers by platform data headerTony Lindgren2014-11-201-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We still need to support platform data for omap3 until it's booting in device tree only mode. So let's add platform_data/omap-gpmc.h for that, and a minimal linux/omap-gpmc.h for the save and restore used by the PM code. Let's also keep a minimal mach-omap2/gpmc.h still around to avoid churn on the board-*.c files. Once omap3 boots in device tree only mode, we can drop mach-omap2/gpmc.h and we can make the data structures in platform_data/omap-gpmc.h private to the GPMC driver. Note that we can now also remove gpmc-nand.h and gpmc-onenand.h. Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: OMAP2+: Drop legacy code for gpmc-smc91x.cTony Lindgren2014-11-041-29/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | This code was only used by 2430sdp, 3430sdp, and n900 development boards. The 2430sdp is already device tree only, and all the users of the 3430sdp and n900 development boards are already booting in device tree mode, so we can drop the legacy smc91x support. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | mmc: omap_hsmmc: remove unused slot_id parameterAndreas Fenkart2014-11-261-1/+1
| | | | | | | | | | | | | | | | | | omap_hsmmc only supports one slot. So slot id is always zero, and slot id was never used in the callbacks anyway Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: omap_hsmmc: remove never read power_saving field in omap2_hsmmc_infoAndreas Fenkart2014-11-261-2/+0
|/ | | | | | | | | these fields are never read, probably an unimplemented feature or superseded by pm_runtime Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* wl1251: move power GPIO handling into the driverSebastian Reichel2014-02-281-9/+2
| | | | | | | | | | Move the power GPIO handling from the board code into the driver. This is a dependency for device tree support. Signed-off-by: Sebastian Reichel <sre@debian.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1251: split wl251 platform data to a separate structureLuciano Coelho2014-02-281-1/+1
| | | | | | | | | | | | | Move the wl1251 part of the wl12xx platform data structure into a new structure specifically for wl1251. Change the platform data built-in block and board files accordingly. Signed-off-by: Luciano Coelho <coelho@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Sebastian Reichel <sre@debian.org> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* [media] si4713: move supply list to si4713_platform_dataDinesh Ram2013-12-181-0/+7
| | | | | | | | | | | The supply list is needed by the platform driver, but not by the usb driver. So this information belongs to the platform data and should not be hardcoded in the subdevice driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* Merge branch 'for-next' of ↵Linus Torvalds2013-11-121-19/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem changes from Bryan Wu: "LED subsystem updates for 3.13 are basically cleanup and also add a new driver for PCA9685" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: lp55xx: handle enable pin in driver leds-gpio: of: led should not be created if its status is disabled of: introduce of_get_available_child_count leds: Added driver for the NXP PCA9685 I2C chip leds: pwm: Remove redundant of_match_ptr leds: Include linux/of.h header leds: dac124s085: Remove redundant spi_set_drvdata leds: lp55xx: enable setting default trigger leds: blinkm: Remove redundant break
| * leds: lp55xx: handle enable pin in driverSebastian Reichel2013-10-251-19/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the handling of the chip's enable pin from the board code into the driver. It also updates all board-code files using the driver to incorporate this change. This is needed for device tree support of the enable pin. Signed-off-by: Sebastian Reichel <sre@debian.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* | Merge tag 'boards-for-linus' of ↵Linus Torvalds2013-11-111-0/+19
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC board updates from Olof Johansson: "Board-related updates. This branch is getting smaller and smaller, which is the whole idea so that's reassuring. Right now by far most of the code is related to shmobile updates, and they are now switching over to removal of board code and migration to multiplatform, so we'll see their board code base shrink in the near future too, I hope. In addition to that is some defconfig updates, some display updates for OMAP and a bit of new board support for Rockchip boards" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (56 commits) ARM: rockchip: add support for rk3188 and Radxa Rock board ARM: rockchip: add dts for bqcurie2 tablet ARM: rockchip: enable arm-global-timer ARM: rockchip: move shared dt properties to common source file ARM: OMAP2+: display: Create omap_vout device inside omap_display_init ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init ARM: OMAP2+: display: Create omapdrm device inside omap_display_init ARM: OMAP2+: drm: Don't build device for DMM ARM: tegra: defconfig updates RX-51: Add support for OMAP3 ROM Random Number Generator ARM: OMAP3: RX-51: ARM errata 430973 workaround ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1 ARM: shmobile: marzen: enable INTC IRQ ARM: shmobile: bockw: add SMSC support on reference ARM: shmobile: Use SMP on Koelsch ARM: shmobile: Remove KZM9D reference DTS ARM: shmobile: Let KZM9D multiplatform boot with KZM9D DTB ARM: shmobile: Remove non-multiplatform KZM9D reference support ARM: shmobile: Use KZM9D without reference for multiplatform ARM: shmobile: Sync KZM9D DTS with KZM9D reference DTS ...
| * RX-51: Add support for OMAP3 ROM Random Number GeneratorPali Rohár2013-10-081-0/+19
| | | | | | | | | | | | | | | | | | | | Adding this driver as platform device and only for RX-51 until somebody test if it working also on other OMAP3 HS devices and until there will be generic ARM way to deal with SMC calls. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> [tony@atomide.com: folded in the clock alias change] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_configPali Rohár2013-10-081-0/+9
|/ | | | | | | | | | | | | | | | File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs attribute if value is higher than max_current specified in board file. By default global C variables are zero, so changing always failed. This patch adding missing max_current and setting it to max safe value 100 (10 mA). It is unclear which commit exactly caused this regression as the lp5523 driver was broken and was hiding the platform data breakage. Now the driver is fixed so this should be fixed as well. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Joerg Reisenweber <joerg@openmoko.org> [tony@atomide.com: updated comments to describe regression] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: rx51: use new display driversTomi Valkeinen2013-08-281-0/+12
| | | | | | | | | | | Use the new display drivers for RX51 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: add vdds_sdi supply for omapdss_sdi.0Tomi Valkeinen2013-06-121-0/+1
| | | | | | | | | | | | | | | | SDI driver gets currently the vdds_sdi regulator via omapdss device. This is not correct, and we'll change the SDI driver to get the regulator directly via omapdss_sdi.0 device. This patch changes the rx51 board file to add vdds_dsi supply for omapdss_sdi.0 device. Note that the vdds_sdi supply for omapdss device is still left there, as the current display driver uses it. When both the board files and the display driver has been changed, we can remove the unused supply. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devicesAaro Koskinen2013-05-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver) broke the SPI display/panel driver probe on RX-51/N900. The exact cause is not fully understood, but it seems to be related to the probe order. SPI communication to the panel driver (spi1.2) fails unless the touchscreen (spi1.0) has been probed/initialized before. When the omap2-mcspi driver was converted to a platform driver, it resulted in that the devices are probed immediately after the board registers them in the order they are listed in the board file. Fix the issue by moving the touchscreen before the panel in the SPI device list. The patch fixes the following failure: [ 1.260955] acx565akm spi1.2: invalid display ID [ 1.265899] panel-acx565akm display0: acx_panel_probe panel detect error [ 1.273071] omapdss CORE error: driver probe failed: -19 Tested-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Joni Lapilainen <joni.lapilainen@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02dAaro Koskinen2013-04-081-0/+4
| | | | | | | | | | | | | Add missing regulator definitions for lis3lv02d accelerometer. Fixes the following probe issue: [ 57.737518] lis3lv02d_i2c 3-001d: Failed to get supply 'Vdd': -517 [ 57.747100] i2c 3-001d: Driver lis3lv02d_i2c requests probe deferral Reported-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'for-next' of ↵Linus Torvalds2013-02-261-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (61 commits) leds: leds-sunfire: use dev_err()/pr_err() instead of printk() leds: 88pm860x: Add missing of_node_put() leds: tca6507: Use of_get_child_count() leds: leds-pwm: make it depend on PWM and not HAVE_PWM Documentation: leds: update LP55xx family devices leds-lp55xx: fix problem on removing LED attributes leds-lp5521/5523: add author and copyright description leds-lp5521/5523: use new lp55xx common header leds-lp55xx: clean up headers leds-lp55xx: clean up definitions leds-lp55xx: clean up unused data and functions leds-lp55xx: clean up _remove() leds-lp55xx: add new function for removing device attribtues leds-lp55xx: code refactoring on selftest function leds-lp55xx: use common device attribute driver function leds-lp55xx: support device specific attributes leds-lp5523: use generic firmware interface leds-lp5521: use generic firmware interface leds-lp55xx: support firmware interface leds-lp55xx: add new lp55xx_register_sysfs() for the firmware interface ...
| * leds-lp5521/5523: use new lp55xx common headerMilo(Woogyom) Kim2013-02-071-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LP55xx common driver provides a new header, leds-lp55xx.h. This driver enables removing duplicate code for both drivers and making coherent driver structure. LP5521 and LP5523/55231 platform data were merged into one common file. Therefore, the LP5521/5523 platform code need to be fixed. This patch has been already acked. For ux500: https://lkml.org/lkml/2012/10/11/417 Acked-by: Linus Walleij <linus.walleij@linaro.org> For omap: https://lkml.org/lkml/2012/10/11/334 Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
* | Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-221-0/+20
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC board specific changes from Arnd Bergmann: "These updates are all for board specific code, including - defconfig updates for shmobile, davinci, bcm2835, imx, omap and tegra - SD/MMC and I2C support on bcm2835 (Raspberry PI) - minor updates for PXA - shmobile updates to GPIO usage in board files - More things in OMAP board files are moved over to device tree probing - Better support for audio devices on some OMAP platforms" * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: imx_v4_v5_defconfig: Add VPU support ARM: imx: configs: enable netfilter support ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc RX-51: Register twl4030-madc device RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers ARM: OMAP1: nokia770: enable CBUS/Retu ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies ARM: OMAP2+: craneboard: support the TPS65910 PMU ARM: OMAP2+: craneboard: support NAND device ARM: OMAP3: cm-t3517: add MMC support ARM: OMAP2+: Remove apollon board support ARM: shmobile: armadillo800eva: set clock rates before timer init ARM: tegra: defconfig updates ARM: shmobile: mackerel: Use gpio_request_one() ARM: shmobile: kzm9g: Use gpio_request_one() ARM: shmobile: bonito: Use gpio_request_one() ...
| * | RX-51: Register twl4030-madc devicePali Rohár2013-02-011-0/+11
| | | | | | | | | | | | | | | | | | | | | Register twl4030-madc device Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernelPali Rohár2013-02-011-0/+9
| |/ | | | | | | | | | | | | Add leds lp5523 names from Maemo 5 2.6.28 kernel Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* / iio:light:tsl2563 move out of stagingJonathan Cameron2013-01-271-1/+1
|/ | | | | | | | | This driver is simple, uses the latest interfaces and contains few if any controversial elements. All of its interfaces have been in place for a long time now. Hence let's move it out of staging. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
* Merge tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6Linus Torvalds2012-12-191-0/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull battery update, part 2, from Anton Vorontsov: "These are left overs that I didn't have time to review/apply before the merge window opened. I didn't want to "spoil" the first pull request with these late patches, so they were not included: - A small patch for the RX51 OMAP board (Nokia N900 phone), the patch creates a battery monitor device instance, so that it can be probed. It was acked by the OMAP maintainer; - A couple of late bug fixes for the charger-manager: corrects corner cases for the battery full handling." * tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6: charger-manager: Fix bug when check dropped voltage after fullbatt event charger-manager: Fix bug related to checking fully charged state of battery ARM: OMAP: rx51: Register platform device for rx51_battery
| * ARM: OMAP: rx51: Register platform device for rx51_batteryPali Rohár2012-12-171-0/+6
| | | | | | | | | | | | | | | | This is needed to make the battery monitor actually work on Nokia N900. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
* | ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.hTony Lindgren2012-11-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP: Make plat/omap-pm.h local to mach-omap2Tony Lindgren2012-10-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We must move this for ARM common zImage support. Note that neither drivers/media/rc/ir-rx51.c or drivers/media/platform/omap3isp/ispvideo.c need to include omap-pm.h, so this patch removes the include for those files. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Timo Kokkonen <timo.t.kokkonen@iki.fi> Cc: linux-media@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge branch 'omap-for-v3.8/cleanup-headers-gpmc' into ↵Tony Lindgren2012-10-171-1/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap-for-v3.8/cleanup-headers Conflicts: arch/arm/mach-omap2/board-3430sdp.c arch/arm/mach-omap2/board-h4.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/mach-omap2/board-rx51.c arch/arm/mach-omap2/pm34xx.c drivers/mtd/nand/omap2.c drivers/mtd/onenand/omap2.c
| * | ARM: OMAP2+: gpmc: localize gpmc headerAfzal Mohammed2012-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Requirement of gpmc header outside of mach-omap2 has been cutoff, move gpmc header file in plat-omap folder to local mach-omap2 folder Objective - common zImage participation of omap Signed-off-by: Afzal Mohammed <afzal@ti.com>
| * | ARM: OMAP2+: onenand: header cleanupAfzal Mohammed2012-10-151-0/+1
| |/ | | | | | | | | | | | | | | | | | | For common arm zImage existing onenand header file in platform specific location was moved to generic platform data location, but it contained more than platform data, remove it. New local header has been created for exposing functions. Signed-off-by: Afzal Mohammed <afzal@ti.com>
* / ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.hLokesh Vutla2012-10-151-1/+1
|/ | | | | | | | Move plat/dma.h to plat-omap/dma-omap.h as part of single zImage work Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: rx51: Fix a section mismatch warnShubhrajyoti D2012-10-081-1/+1
| | | | | | | | | | | | | | | | | | | rx51_si4713_dev is referenced only from rx51_init_si4713. So the memory for rx51_si4713_dev can be safely freed after init. Also it references rx51_si4713_board_info which is __initdata_or_module. fixes the below warning. WARNING: vmlinux.o(.data+0x30958): Section mismatch in reference from the variable rx51_si4713_dev to the (unknown reference) .init.data:(unknown) The variable rx51_si4713_dev references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Reported-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'v4l_for_linus' of ↵Linus Torvalds2012-10-071-0/+30
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "The first part of the media updates for Kernel 3.7. This series contain: - A major tree renaming patch series: now, drivers are organized internally by their used bus, instead of by V4L2 and/or DVB API, providing a cleaner driver location for hybrid drivers that implement both APIs, and allowing to cleanup the Kconfig items and make them more intuitive for the end user; - Media Kernel developers are typically very lazy with their duties of keeping the MAINTAINERS entries for their drivers updated. As now the tree is more organized, we're doing an effort to add/update those entries for the drivers that aren't currently orphan; - Several DVB USB drivers got moved to a new DVB USB v2 core; the new core fixes several bugs (as the existing one that got bitroted). Now, suspend/resume finally started to work fine (at least with some devices - we should expect more work with regards to it); - added multistream support for DVB-T2, and unified the API for DVB-S2 and ISDB-S. Backward binary support is preserved; - as usual, a few new drivers, some V4L2 core improvements and lots of drivers improvements and fixes. There are some points to notice on this series: 1) you should expect a trivial merge conflict on your tree, with the removal of Documentation/feature-removal-schedule.txt: this series would be adding two additional entries there. I opted to not rebase it due to this recent change; 2) With regards to the PCTV 520e udev-related breakage, I opted to fix it in a way that the patches can be backported to 3.5 even without your firmware fix patch. This way, Greg doesn't need to rush backporting your patch (as there are still the firmware cache and firmware path customization issues to be addressed there). I'll send later a patch (likely after the end of the merge window) reverting the rest of the DRX-K async firmware request, fully restoring its original behaviour to allow media drivers to initialize everything serialized as before for 3.7 and upper. 3) I'm planning to work on this weekend to test the DMABUF patches for V4L2. The patches are on my queue for several Kernel cycles, but, up to now, there is/was no way to test the series locally. I have some concerns about this particular changeset with regards to security issues, and with regards to the replacement of the old VIDIOC_OVERLAY ioctl's that is broken on modern systems, due to GPU drivers change. The Overlay API allows direct PCI2PCI transfers from a media capture card into the GPU framebuffer, but its API is crappy. Also, the only existing X11 driver that implements it requires a XV extension that is not available anymore on modern drivers. The DMABUF can do the same thing, but with it is promising to be a properly-designed API. If I can successfully test this series and be happy with it, I should be asking you to pull them next week." * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (717 commits) em28xx: regression fix: use DRX-K sync firmware requests on em28xx drxk: allow loading firmware synchrousnously em28xx: Make all em28xx extensions to be initialized asynchronously [media] tda18271: properly report read errors in tda18271_get_id [media] tda18271: delay IR & RF calibration until init() if delay_cal is set [media] MAINTAINERS: add Michael Krufky as tda827x maintainer [media] MAINTAINERS: add Michael Krufky as tda8290 maintainer [media] MAINTAINERS: add Michael Krufky as cxusb maintainer [media] MAINTAINERS: add Michael Krufky as lg2160 maintainer [media] MAINTAINERS: add Michael Krufky as lgdt3305 maintainer [media] MAINTAINERS: add Michael Krufky as mxl111sf maintainer [media] MAINTAINERS: add Michael Krufky as mxl5007t maintainer [media] MAINTAINERS: add Michael Krufky as tda18271 maintainer [media] s5p-tv: Report only multi-plane capabilities in vidioc_querycap [media] s5p-mfc: Fix misplaced return statement in s5p_mfc_suspend() [media] exynos-gsc: Add missing static storage class specifiers [media] exynos-gsc: Remove <linux/version.h> header file inclusion [media] s5p-fimc: Fix incorrect condition in fimc_lite_reqbufs() [media] s5p-tv: Fix potential NULL pointer dereference error [media] s5k6aa: Fix possible NULL pointer dereference ...
| * [media] ARM: mach-omap2: board-rx51-peripherals: Add lirc-rx51 dataTimo Kokkonen2012-08-131-0/+30
| | | | | | | | | | | | | | | | | | | | The IR diode on the RX51 is connected to the GPT9. This data is needed for the IR driver to function. Signed-off-by: Timo Kokkonen <timo.t.kokkonen@iki.fi> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | ARM: OMAP2+: Make gpmc-smc91x.h localTony Lindgren2012-09-211-1/+1
| | | | | | | | | | | | This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: Make board-rx51.h localTony Lindgren2012-09-211-1/+1
| | | | | | | | | | | | This can be local to mach-omap2. Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: omap: move platform_data definitionsArnd Bergmann2012-09-191-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
* | ARM: OMAP2+: Prepare for irqs.h removalTony Lindgren2012-09-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the interrupts should only be defined in the platform_data, and eventually coming from device tree, there's no need to define them in header files. Let's remove the hardcoded references to irqs.h and fix up the includes so we don't rely on headers included in irqs.h. Note that we're defining OMAP_INTC_START as 0 to the interrupts. This will be needed when we enable SPARSE_IRQ. For some drivers we need to add #include <plat/cpu.h> for now until these drivers are fixed to remove cpu_is_omapxxxx() usage. While at it, sort som of the includes the standard way, and add the trailing commas where they are missing in the related data structures. Note that for drivers/staging/tidspbridge we just define things locally. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_endTony Lindgren2012-09-131-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | We can't use hardcoded interrupts for SPARSE_IRQ, and can replace the hardcoded gpio_base with twl_gpiochip.base after it's been allocated. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: OMAP: remove plat/board.h fileIgor Grinberg2012-09-111-1/+0
|/ | | | | | | | | | | | | plat/board.h file is now empty - remove it. Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 07:25:36 +0100