summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap (follow)
Commit message (Collapse)AuthorAgeFilesLines
* omap: McBSP: Drop unnecessary status/error bit clearing on ↵Janusz Krzysztofik2010-03-121-8/+4
| | | | | | | | | | | | | | | | | | | reg_cacheretrieved register values The MsBSP register cache will never have any error/status flags set, since these flags are never written to the reg_cache. So it is kind of not necessary to clear these flags, which are actually always 0. In other words, clearing the status/error flags are not necessary, since the reg_cache will never got these bits set. We can just write back the register content from the cache as it is when clearing an error condition. Tested on Amstrad Delta. Reported-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP2: cpu_is_omap2*: fix compile-time removal of unused codeKevin Hilman2010-03-121-2/+6
| | | | | | | | | | | | | | | | Currently if omap2420 is defined but not omap2430, cpu_is_omap2430() is still defined as a macro, instead of #define'd to zero. This results in conditional cpu_is_omap2430() code still being compiled, and leads to possible compile/link errors. In particular for hwmod init. To fix, add extra #ifdefs to CPU check macros to ensure that the is_omap* macros are zero for each OMAP2 if they are not configured into the kernel. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Fix gpio_resume_after_retentionSergio Aguirre2010-03-111-5/+5
| | | | | | | | | | | | | | | | For omap4 case, this was wrongly writing GPIO_LEVELDETECTx registers with OMAP24XX_ offset and OMAP4_ offset. Bug introduced in commit: commit 3f1686a9bfe74979c6ad538c78039730f665f77e Author: Tony Lindgren <tony@atomide.com> Date: Mon Feb 15 09:27:25 2010 -0800 omap: Fix gpio.c for multi-omap for omap4 Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: Checkpatch cleanup for blizzard.hAndrea Gelmini2010-03-111-1/+1
| | | | | | | | arch/arm/plat-omap/include/plat/blizzard.h:9: ERROR: spaces prohibited around that ':' (ctx:WxW) Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap: pass the reboot command to the boot loaderAaro Koskinen2010-03-112-4/+4
| | | | | | | | | | | | | | | | | | This patch follows the commit be093beb608edf821b45fe00a8a080fb5c6ed4af by Russell King: OMAP wishes to pass state to the boot loader upon reboot in order to instruct it whether to wait for USB-based reflashing or not. There is already a facility to do this via the reboot() syscall, except we ignore the string passed to machine_restart(). The patch adds the missing parameter to omap1_arch_reset() and omap_prcm_arch_reset(), and modifies the latter to pass the reboot command parameter to the boot loader instead of reboot mode (which is for kernel internal use only and cannot be modified by the userspace). Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap2/3/4: ehci: avoid compiler error with touchbookFelipe Balbi2010-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | the early_param() call in board-omap3touchbook.c expands to: static const char __setup_str_early_touchbook_revision[] __section(.init.rodata) _aligned(1) = tbr; [...] and we have a non-const variable being added to the same section: static struct ehci_hcd_omap_platform_data ehci_pdata __section(.init.rodata); because of that, gcc generates a section type conflict which can (and actually should) be avoided by marking const every variable marked with __initconst. This patch fixes that for the ehci_hdc_omap_platform_data. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds2010-03-021-51/+66
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (49 commits) OMAP: DSS2: Taal: Fix TE when resuming OMAP: DSS2: Taal: Fix ESD check OMAP: DSS2: OMAPFB: Constify some function parameters OMAP: DSS2: OMAPFB: install omapfb.h OMAP: DSS2: DSI: add error prints OMAP: DSS2: TPO-TD03MTEA1: fix function names OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helper OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATE OMAP: DSS2: DSI: remove external TE support OMAP: DSS2: move timing functions OMAP: DSS2: move set/get_wss() OMAP: DSS2: move enable/disable/suspend/resume OMAP: DSS2: move update() and sync() OMAP: DSS2: move set/get_update_mode() OMAP: DSS2: move enable/get_te() OMAP: DSS2: move get_recommended_bpp() OMAP: DSS2: move get_resolution() OMAP: DSS2: move enable/disable_channel to overlay manager OMAP: DSS2: move wait_vsync() OMAP: DSS2: move get/set_rotate() ...
| * OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helperTomi Valkeinen2010-02-251-0/+1
| | | | | | | | | | | | | | Add dsi_vc_dcs_read_2() helper function to read two bytes from the DSI peripheral. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move timing functionsTomi Valkeinen2010-02-241-7/+11
| | | | | | | | | | | | | | | | | | Move check/set/get_timings() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move set/get_wss()Tomi Valkeinen2010-02-241-3/+3
| | | | | | | | | | | | | | | | | | Move set/get_wss() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move enable/disable/suspend/resumeTomi Valkeinen2010-02-241-7/+11
| | | | | | | | | | | | | | | | | | | | Move enable/disable/suspend/resume from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move update() and sync()Tomi Valkeinen2010-02-241-6/+18
| | | | | | | | | | | | | | | | | | | | | | | | Move update() and sync() from omap_dss_device to omap_dss_driver. Also, update was hardcoded to use virtual channel 0. This patch adds a parameter that specifies the VC. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move set/get_update_mode()Tomi Valkeinen2010-02-241-5/+4
| | | | | | | | | | | | | | | | | | Move set/get_update_mode() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move enable/get_te()Tomi Valkeinen2010-02-241-3/+2
| | | | | | | | | | | | | | | | | | Move enable/get_te() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move get_recommended_bpp()Tomi Valkeinen2010-02-241-4/+3
| | | | | | | | | | | | | | | | | | Move get_recommended_bpp() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move get_resolution()Tomi Valkeinen2010-02-241-2/+5
| | | | | | | | | | | | | | | | | | Move get_resolution() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move enable/disable_channel to overlay managerTomi Valkeinen2010-02-241-0/+3
| | | | | | | | | | | | | | | | | | Move enable/disable_channel() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move wait_vsync()Tomi Valkeinen2010-02-241-1/+1
| | | | | | | | | | | | | | | | | | Move wait_vsync() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move get/set_rotate()Tomi Valkeinen2010-02-241-3/+0
| | | | | | | | | | | | | | | | | | Move get/set_rotate() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move set/get_mirror()Tomi Valkeinen2010-02-241-3/+0
| | | | | | | | | | | | | | | | | | Move set/get_mirror() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move memory_read()Tomi Valkeinen2010-02-241-4/+0
| | | | | | | | | | | | | | | | | | Move memory_read() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: move run_test()Tomi Valkeinen2010-02-241-1/+0
| | | | | | | | | | | | | | | | | | Move run_test() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: remove sub-panel systemTomi Valkeinen2010-02-181-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | The system to allow panel drivers to exists as attached to ctrl drivers did never work very well. It is not useed, and this patch removes it to make the driver cleaner. For now, controller drivers need to include also the panel driver code. In the future a proper mechanism for this should be developed, perhaps by creating busses for controllers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: DSI: export dsi_vc_enable_hs()Tomi Valkeinen2010-02-151-0/+2
| | | | | | | | | | | | | | Rename and export dsi_vc_enable_hs() so that the display drivers can control the mode of the DSI link. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * OMAP: DSS2: DSI: add helpers for DCS read/writeTomi Valkeinen2010-02-151-0/+3
| | | | | | | | | | | | Add helper functions for most common DCS read and write operations. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
* | Merge with mainline to remove plat-omap/Kconfig conflictTony Lindgren2010-03-013-1/+3
|\ \ | | | | | | | | | | | | Conflicts: arch/arm/plat-omap/Kconfig
| * \ Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-03-013-1/+3
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits) ARM: Eliminate decompressor -Dstatic= PIC hack ARM: 5958/1: ARM: U300: fix inverted clk round rate ARM: 5956/1: misplaced parentheses ARM: 5955/1: ep93xx: move timer defines into core.c and document ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c ARM: 5953/1: ep93xx: fix broken build of clock.c ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig ARM: 5949/1: NUC900 add gpio virtual memory map ARM: 5948/1: Enable timer0 to time4 clock support for nuc910 ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk ARM: make_coherent(): fix problems with highpte, part 2 MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself ARM: 5945/1: ep93xx: include correct irq.h in core.c ARM: 5933/1: amba-pl011: support hardware flow control ARM: 5930/1: Add PKMAP area description to memory.txt. ARM: 5929/1: Add checks to detect overlap of memory regions. ARM: 5928/1: Change type of VMALLOC_END to unsigned long. ARM: 5927/1: Make delimiters of DMA area globally visibly. ARM: 5926/1: Add "Virtual kernel memory..." printout. ARM: 5920/1: OMAP4: Enable L2 Cache ... Fix up trivial conflict in arch/arm/mach-mx25/clock.c
| | * | ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH ↵Kukjin Kim2010-02-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kconfig Add ARM_L1_CACHE_SHIFT_6 to arch/arm/Kconfig to allow CPUs with L1 cache lines which are 64bytes to indicate this without having to alter the arch/arm/mm/Kconfig entry each time. Update the mm Kconfig so that ARM_L1_CACHE_SHIFT default value uses this and change OMAP3 and S5PC1XX to select ARM_L1_CACHE_SHIFT_6. Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | ARM: 5917/1: OMAP4: Add L2 Cache supportSantosh Shilimkar2010-02-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds L2 Cache support for OMAP4. External L2 cache is used in OMAP4 CC: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | ARM: Add caller information to ioremapRussell King2010-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows the procfs vmallocinfo file to show who created the ioremap regions. Note: __builtin_return_address(0) doesn't do what's expected if its used in an inline function, so we leave __arm_ioremap callers in such places alone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | omap: i2c: Fix muxing for command line enabled busJarkko Nikula2010-02-252-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit b63128e81214cc2db2995d690438055c26d213a5 broke the pin muxing for I2C busses that are enabled from the kernel command line. Fix this by defining the board registration function omap_register_i2c_bus in common platform code as it was before but keep the muxing in architecture dependent files. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | | Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linusTony Lindgren2010-02-258-76/+267
|\ \ \ \
| * | | | OMAP4: clock: Add dummy clock nodes for interface clocksSantosh Shilimkar2010-02-252-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On OMAP4 platform the iclk control is completly under hardware control and no software control is available. This difference w.r.t previous OMAP's needs all the common driver accross OMAP's , cpu_is_xxxx() checks. To avoid poulluting the drivers dummy clock nodes are created (The autogeneration script has been updated accordingly). Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: made OMAP1 dummy_ck common and edited patch to reuse that] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * | | | OMAP hwmod: add hwmod class supportPaul Walmsley2010-02-251-9/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for categorizing and iterating over hardware IP blocks by the "class" of the IP block. The class is the type of the IP block: e.g., "timer", "timer1ms", etc. Move the OCP_SYSCONFIG/SYSSTATUS data from the struct omap_hwmod into the struct omap_hwmod_class, since it's expected to stay consistent for each class. While here, fix some comments. The hwmod_class structures in this patch were designed and proposed by Benoît Cousson <b-cousson@ti.com> and were refined in a discussion between Thara Gopinath <thara@ti.com>, Kevin Hilman <khilman@deeprootsystems.com>, and myself. This patch uses WARN() lines that are longer than 80 characters, as Kevin noted a broader lkml consensus to increase greppability by keeping the messages all on one line. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Cc: Thara Gopinath <thara@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
| * | | | OMAP hwmod: convert header files with static allocations into C filesPaul Walmsley2010-02-241-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Code should be able to #include any header file without the fear that the header file will go allocating memory. This is a coding style issue, similar to commit 82e9bd588563c4e22ebb55b684ebec7e310cc715. Move the existing hwmod data from .h files to .c files. While here, convert "omap34xx" to "omap3xxx" in the hwmod files, since most of these structures should be reusable across all OMAP3 chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
| * | | | OMAP hwmod: convert hwmod to use hardware clock names rather than clkdev dev+conPaul Walmsley2010-02-241-16/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OMAP hwmod core code is intended to use SoC IP block description structures that are autogenerated from TI's OMAP hardware database. Currently the hwmod code uses clkdev device + connection addressing to identify clocks. This causes problems in the hwmod autogeneration process, since the TI hardware database doesn't use platform_device or clkdev addressing; it uses a single clock signal name string, which tends to bear some resemblance to what is used in the OMAP TRMs. This patch converts the hwmod code and existing data to use omap_clk_get_by_name(), introduced in the previous patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
| * | | | OMAP clock: add omap_clk_get_by_name() for use by OMAP hwmod core codePaul Walmsley2010-02-242-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OMAP hwmod core code is intended to use SoC IP block description structures that are autogenerated from TI's OMAP hardware database. Currently the hwmod code uses clkdev device + connection addressing to identify clocks. This causes problems in the hwmod autogeneration process, since the TI hardware database doesn't use platform_device or clkdev addressing; it uses a single clock signal name string, which tends to bear some resemblance to what is used in the OMAP TRMs. This patch adds a non-exported function to the OMAP clock code, omap_clk_get_by_name(). A subsequent patch will convert the hwmod code to use this function. This function is for use only by core code, and practically, no other code outside the hwmod code should need it. Device driver code in the kernel must not use this function, which is why it is not exported. Drivers should use the appropriate clock alias provided by the clkdev data structures, so driver code can be completely SoC-independent. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
| * | | | OMAP4 clock: drop the ALWAYS_ENABLED clock flagPaul Walmsley2010-02-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Get rid of the ALWAYS_ENABLED clock flag - it doesn't actually do anything. (The OMAP4 clock autogeneration scripts have been updated accordingly.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoît Cousson <b-cousson@ti.com>
| * | | | OMAP clock: drop RATE_FIXED clock flagPaul Walmsley2010-02-241-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RATE_FIXED clock flag is pointless. In the OMAP1 clock code, it simply causes the omap1_clk_round_rate() function to return the current rate of the clock. omap1_clk_round_rate(), however, should never be called for a fixed-rate clock, since none of these clocks have a .round_rate function pointer set in their struct clk records. Similarly, in the OMAP2+ clock code, the RATE_FIXED flag just causes the clock code to emit a warning if the OMAP clock maintainer was foolish enough to add a .round_rate function pointer to a fixed-rate clock. "Doctor, it hurts when I pretend that a fixed-rate clock is rate-changeable." "Then don't pretend that a fixed-rate clock is rate-changeable." It has no functional value. This patch drops the RATE_FIXED clock flag, removing it from all clocks that are so marked. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
| * | | | OMAP2 clock: drop DELAYED_APP clock flagPaul Walmsley2010-02-241-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All of the clocks that are marked with DELAYED_APP are changed as part of the virt_prcm_set OPP virtual clock. On 24xx, these clocks all need to be changed as part of a group to keep the clock tree functional - hence the need for the VALID_CONFIG bit, which is not present on later OMAPs. These clocks should not be rate-changed independently. So prevent these clocks from being changed independently by dropping their .round_rate and .set_rate function pointers. It then turns out that the DELAYED_APP clock flag is no longer useful, so drop it and the associated code and renumber the clock flags. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
| * | | | OMAP clock: drop .id field; ensure each clock has a unique namePaul Walmsley2010-02-242-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the clkdev conversion, the struct clk.id field became superfluous, so, drop it. Bring the clock names closer to the TRMs and ensure they are unique for debugfs. Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * | | | OMAP clock: compress clock flags down to a u8Paul Walmsley2010-02-241-15/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are now only eight OMAP clock flags, so renumber the flags to fit in a u8 and shrink the size of struct clk.flags from a u32 to a u8. The intention is to save memory. Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * | | | OMAP2 clock: drop CONFIG_PARTICIPANT clock flagPaul Walmsley2010-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turns out that the only purpose of the CONFIG_PARTICIPANT clock flag is to prevent omap2_clk_set_rate() and omap2_clk_set_parent() from being executed on clocks with that flag set. The rate-changing component can be more directly accomplished by dropping the .set_rate and .round_rate function pointers from those CONFIG_PARTICIPANT struct clks. As far as the parent-changing component is concerned, it turns out that none of the CONFIG_PARTICIPANT clocks have multiple parent choices, so all that is necessary is for omap2_clk_set_parent() to bail out early if the new parent is equal to the old parent. Implement this change and get rid of the flag, which has always had a confusing name (it appears to be a Kconfig option, falsely). Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
| * | | | OMAP4 clock: drop the CLOCK_IN_OMAP4430 clock flagPaul Walmsley2010-02-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CLOCK_IN_OMAP4430 clock flag is not currently needed in the OMAP4 ES1 clock tree, and platform discrimination via clock flags is deprecated in favor of the clkdev mechanism, so, drop it. (The OMAP4 clock tree autogeneration script has been updated accordingly.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
| * | | | OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, ↵Paul Walmsley2010-02-241-12/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | includes, documentation The maximum DPLL multiplier (M) values for OMAP2xxx and OMAP3xxx are one increment higher than they should be. See for example the OMAP242x TRM Rev X Section 5.10.6 "Clock Generator Registers" and the OMAP36xx TRM Rev C Table 3-202 "CM_CLKSEL1_PLL". Programming a 0 into the DPLL's M register bitfield is valid for OMAP2/3 and indicates that the DPLL should enter MN-bypass mode. Also, increase the minimum multiplier (M) value for the DPLL rate rounding code from 1 to 2, to ensure that it does not inadvertently put the DPLL into bypass. Note that the register documentation in the OMAP2xxx and OMAP3xxx TRMs does not make clear that the actual DPLL divider value (the "N") is the content of the appropriate register bitfield for the N value, _plus one_. (In other words, an N register bitfield of 0 indicates a DPLL divider value of 1.) This is only clearly documented in the OMAP4430 TRM, in, for example, OMAP4430 TRM Rev A Table 3-1167 "CM_CLKSEL_DPLL_USB". While here, update copyrights, add kerneldoc for struct dpll_data, drop the unused struct dpll_data.max_tolerance field, remove some unnecessary #includes in DPLL-related code, and replace the #include of <linux/module.h> with <linux/list.h>, which is what was really needed. The OMAP4 clock autogenerator script has been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
| * | | | OMAP3 clock: add support for 192Mhz DPLL4M2 outputVishwanath BS2010-02-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 3630, DPLL4M2 output can be 96MHz or 192MHz (for SGX to run at 192). This patch has changes to support this feature. 96MHz clock is generated by dividing 192Mhz clock by 2 using CM_CLKSEL_CORE register. SGX can select Core Clock, 192MHz clock or CM_96M_FCLK as it's functional clock. In summary changes done are: 1. Added a feature called omap3_has_192mhz_clk and enabled for 3630 2. Added a new clock node called omap_192m_alwon_ck 3. Made omap_96m_alwon_fck to derive its clock from omap_192m_alwon_ck Signed-off-by: Vishwanath BS <Vishwanath.bs@ti.com> [paul@pwsan.com: fixed whitespace] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * | | | OMAP3 clock: Introduce 3630 DPLL4 HSDivider changesVishwanath BS2010-02-241-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Divider (M2, M3, M4, M5 and M6) field width has been increased by 1 bit in 3630. This patch has changes to accommodate this in CM dynamically based on chip version. Basically new clock nodes have been added for 3630 DPLL4 M2,M3,M4,M5 and M6 and value of these nodes are used if cpu type is 3630. Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com> [paul@pwsan.com: updated to apply on 2.6.34 queue; comments added] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * | | | OMAP3 clock: introduce DPLL4 JtypeRichard Woodruff2010-02-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DPLL4 for 3630 introduces a changed block called j type dpll, requiring special divisor bits and additional reg fields. To allow for silicons to use this, this is introduced as a flag and is enabled for 3630 silicon. OMAP4 also has j type dpll for usb. Tested with 3630 ZOOM3 and OMAP3430 ZOOM2 Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Vishwanath BS <Vishwanath.bs@ti.com> [paul@pwsan.com: added some comments; updated copyrights and credits; fixed some style issues] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * | | | OMAP: HWMOD: Add support for early device register into omap device layerThara Gopinath2010-02-242-6/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support in omap device layer to register devices as early platform devices. Certain devices needed during system boot up like timers, gpio etc can be registered as early devices. This will allow for them to be probed very early on during system boot up. This patch adds a parameter is_early_device in omap_device_build. Depending on this parameter a call to early_platform_add_devices or platform_register_device is made. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * | | | OMAP3: hwmod: support to specify the offset position of various SYSCONFIG ↵Thara Gopinath2010-02-241-15/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | register bits. In OMAP3 Some modules like Smartreflex do not have the regular sysconfig register.Instead clockactivity bits are part of another register at a different bit position than the usual bit positions 8 and 9. In OMAP4, a new scheme is available due to the new protocol between the PRCM and the IPs. Depending of the scheme, the SYSCONFIG bitfields position will be different. The IP_REVISION register should be at offset 0x00. It should contain a SCHEME field. From this we can determine whether the IP follows legacy scheme or the new scheme. 31:30 SCHEME Used to distinguish between old scheme and current. Read 0x0: Legacy protocol. Read 0x1: New PRCM protocol defined for new OMAP4 IPs For legacy IP 13:12 MIDLEMODE 11:8 CLOCKACTIVITY 6 EMUSOFT 5 EMUFREE 4:3 SIDLEMODE 2 ENAWAKEUP 1 SOFTRESET 0 AUTOIDLE For new OMAP4 IP's, the bit position in SYSCONFIG is (for simple target): 5:4 STANDBYMODE (Ex MIDLEMODE) 3:2 IDLEMODE (Ex SIDLEMODE) 1 FREEEMU (Ex EMUFREE) 0 SOFTRESET Unfortunately In OMAP4 also some IPs will not follow any of these two schemes. This is the case at least for McASP, SmartReflex and some security IPs. This patch introduces a new field sysc_fields in omap_hwmod_sysconfig which can be used by the hwmod structures to specify the offsets for the sysconfig register of the IP.Also two static structures omap_hwmod_sysc_type1 and omap_hwmod_sysc_type2 are defined which can be used directly to populate the sysc_fields if the IP follows legacy or new OMAP4 scheme. If the IP follows none of these two schemes a new omap_hwmod_sysc_fields structure has to be defined and passed as part of omap_hwmod_sysconfig. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 06:37:09 +0100