summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi (follow)
Commit message (Collapse)AuthorAgeFilesLines
* arm64: dts: freescale: fix the schema check errors for fsl,tmu-calibrationDavid Heidelberg2023-12-161-40/+41
| | | | | | | | | | | fsl,tmu-calibration contains cell pairs (u32-matrix). Mark them as such. Use matching property syntax and allow correct validation. No functional changes. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: remove second dspi nodeGregor Herburger2023-10-101-14/+0
| | | | | | | | According to the documentation the ls1043a has only one spi controller. So remove the second one. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: freescale: add missing cache propertiesKrzysztof Kozlowski2023-05-141-0/+1
| | | | | | | | | | As all level 2 and level 3 caches are unified, add required cache-unified properties to fix warnings like: fsl-ls2080a-simu.dtb: l2-cache3: 'cache-unified' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: Update cache properties for freescalePierre Gondois2022-11-151-0/+1
| | | | | | | | | | | | | | | The DeviceTree Specification v0.3 specifies that the cache node 'compatible' and 'cache-level' properties are 'required'. Cf. s3.8 Multi-level and Shared Cache Nodes The 'cache-unified' property should be present if one of the properties for unified cache is present ('cache-size', ...). Update the Device Trees accordingly. Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Chester Lin <clin@suse.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma sizeLaurentiu Tudor2022-09-171-42/+50
| | | | | | | | | | | | | | Wrap the usb and sata controllers in an intermediate simple-bus and use it to constrain the dma address size of these usb controllers to the 40 bits that they generate toward the interconnect. This is required because the SoC uses 48 bits address sizes and this mismatch would lead to smmu context faults because the usb generates 40-bit addresses while the smmu page tables are populated with 48-bit wide addresses. Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: add gpio based i2c recovery informationLi Yang2022-09-171-4/+8
| | | | | | | | | Add scl-gpios property for i2c recovery and add SoC specific compatible string for SoC specific fixup. Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: make dma-coherent global to the SoCLi Yang2022-09-171-3/+1
| | | | | | | | | | ls1043a is really completely dma coherent in their entirety so add the dma-coherent property at the soc level in the device tree and drop the instances where it's specifically added to a few select devices. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: add missing dma ranges propertyLaurentiu Tudor2022-09-171-0/+1
| | | | | | | | | | ls1043a has a 48-bit address size so make sure that the dma-ranges reflects this. Otherwise the linux kernel's dma sub-system will set the default dma masks to full 64-bit, badly breaking dmas. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: Add big-endian property for PCIe nodesHou Zhiqiang2022-09-171-0/+3
| | | | | | | | | Add the big-endian property for LS1043A PCIe nodes for accessing PEX_LUT and PF register block. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: Add SCFG phandle for PCIe nodesHou Zhiqiang2022-09-171-0/+3
| | | | | | | | | | The LS1043A PCIe controller has some control registers in SCFG block, so add the SCFG phandle for each PCIe controller node. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: use pcie aer/pme interruptsLi Yang2022-09-171-9/+9
| | | | | | | | | | After the binding has been updated to include more specific interrupt definition, update the dts to use the more specific interrupt names. Signed-off-by: Po Liu <po.liu@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 nodeLi Yang2022-09-171-0/+3
| | | | | | | | Enable USB3 HW LPM feature for ls1043a. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: fix the wrong size of dcfg spaceLi Yang2022-09-171-1/+1
| | | | | | | The size of the block should be 0x1000 instead of 0x10000. Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: layerscape: Add SFP node for TA 2.1 devicesSean Anderson2022-07-051-0/+8
| | | | | | | This adds an appropriate SFP node for Trust Architecture 2.1 devices. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: fsl: adjust whitespace around '='Krzysztof Kozlowski2022-06-141-5/+5
| | | | | | | | | Fix whitespace coding style: use single space instead of tabs or multiple spaces around '=' sign in property assignment. No functional changes (same DTB). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: fsl-ls10xx: use generic dma node namePeng Fan2022-06-141-1/+1
| | | | | | | | dma-controller is preferred for dma node. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: freescale: reduce the interrup-map-maskMichael Walle2022-05-051-1/+1
| | | | | | | | Reduce the interrupt-map-mask of the external interrupt controller to 0xf to align with the devicetree schema. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: freescale: update ifc node name to be memory-controllerLi Yang2022-05-051-1/+1
| | | | | | | | | | | Update the node name to be align with updated DT binding. But be noted that u-boot for ls1088a used the ifc node name to disable ifc-nor node when the SoC is configured to use QSPI. The u-boot has been updated to use the latest name but the change could break compatibility with older u-boot for ls1088a. Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: remove "simple-bus" compatible from ifc nodeLi Yang2022-05-051-1/+1
| | | | | | | | The binding of ifc device has been updated. Update dts to match accordingly. Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: Update i2c dma propertiesKuldeep Singh2022-04-011-3/+3
| | | | | | | | | | | Reorder dmas and dma-names properties for i2c controller node to make it compliant with bindings. Fixes: 6d453cd22357 ("arm64: dts: add Freescale LS1043a SoC support") Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> CC: soc@kernel.org Link: https://lore.kernel.org/r/20220326042313.97862-4-singh.kuldeep87k@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* arm64: dts: freescale: Separate each group of data in the property 'reg'Zhen Lei2021-06-121-6/+6
| | | | | | | | | | | | | Do not write the 'reg' of multiple groups of data into a uint32 array, use <> to separate them. Otherwise, the errors similar to the following will be reported by reg.yaml. arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dt.yaml: soc: pcie@3400000:reg:0: \ [0, 54525952, 0, 1048576, 64, 0, 0, 8192] is too long Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: mark crypto engine dma coherentHoria Geantă2021-03-151-0/+1
| | | | | | | | | | | | | | | Crypto engine (CAAM) on LS1043A platform is configured HW-coherent, mark accordingly the DT node. Lack of "dma-coherent" property for an IP that is configured HW-coherent can lead to problems, similar to what has been reported for LS1046A. Cc: <stable@vger.kernel.org> # v4.8+ Fixes: 63dac35b58f4 ("arm64: dts: ls1043a: add crypto node") Link: https://lore.kernel.org/linux-crypto/fe6faa24-d8f7-d18f-adfa-44fa0caa1598@arm.com Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: use constants in the clockgen phandleMichael Walle2021-01-111-25/+48
| | | | | | | Now that we have constants, use them. This is just a mechanical change. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: add DT node for external interrupt linesBiwen Li2021-01-051-0/+25
| | | | | | | Add device-tree node for external interrupt lines IRQ0-IRQ11. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: freescale: update calibration table for TMU moduleYuantian Tang2020-11-301-37/+41
| | | | | | | | Update the calibration table to make the temperature more accurate. Three platforms have been updated: ls1012a, ls1043a and ls1046a. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: layerscape: Harmonize DWC USB3 DT nodes nameSerge Semin2020-11-011-3/+3
| | | | | | | | | | | | In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: freescale: align watchdog node name with dtschemaKrzysztof Kozlowski2020-10-301-1/+1
| | | | | | | | | | The dtschema expects watchdog device node name to be "watchdog": arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dt.yaml: wdog@2ad0000: $nodename:0: 'wdog@2ad0000' does not match '^watchdog(@.*|-[0-9a-f])?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: layerscape: Add label to pcie nodesWasim Khan2020-09-221-5/+5
| | | | | | | | Add label to pcie nodes so that they are easy to refer. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: update USB nodes status to match board configRan Wang2020-07-131-0/+3
| | | | | | | | | | | | | ls1043a-rdb and ls1043a-qds board’s default HW config (such as pin mux selection) would not enable some USB controllers’ data path, which causing over-current detected on those controllers. This will hit the case of ‘xhci driver prevent bus suspend if a root hub port detected over-current condition’, causing system failed to be suspended. So disable them in device tree to resolve this issue. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: add more thermal zone supportYuantian Tang2020-07-131-4/+84
| | | | | | | | There are 5 thermal zones in ls1043a soc. Add the rest thermal zone nodes to enable them. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: layerscape: add ftm_alarm0 nodeBiwen Li2020-07-111-0/+14
| | | | | | | | | | The patch adds ftm_alarm0 DT node - add new rcpm node - add ftm_alarm0 node - aliases ftm_alarm0 as rtc1 Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: add qe node to ls1043ardbZhao Qiang2020-05-201-0/+65
| | | | | | | Add qe node to fsl-ls1043a.dtsi and fsl-ls1043a-rdb.dts Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: fsl: Remove num-lanes property from PCIe nodesHou Zhiqiang2019-08-221-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the num-lanes property to avoid the driver setting the link width. On FSL Layerscape SoCs, the number of lanes assigned to PCIe controller is not fixed, it is determined by the selected SerDes protocol in the RCW (Reset Configuration Word). The PCIe link training is completed automatically through the selected SerDes protocol - the link width set-up is updated by hardware after power on reset, so the num-lanes property is not needed for Layerscape PCIe. The current num-lanes property was added erroneously, which actually indicates the maximum lanes the PCIe controller can support up to, instead of the lanes assigned to the PCIe controller. The link width set by SerDes protocol will be overridden by the num-lanes property, hence the subsequent re-training will fail when the assigned lanes do not match the value in the num-lanes property. Remove the property to fix the issue Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
* arm64: dts: ls1043a: add crypto node alias also for qdsHoria Geantă2019-03-221-0/+1
| | | | | | | | | crypto node alias is needed by U-boot to identify the node and perform fix-ups, like adding "fsl,sec-era" property or deleting a job ring child node (in case ARM TF-A is running). Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: fsl: Remove unused properties from FSL QSPI nodesFrieder Schrempf2019-03-221-1/+0
| | | | | | | | | | | | After switching to the new FSL QSPI driver the properties 'fsl,qspi-has-second-chip' and 'big-endian' are not used anymore. The driver now uses the 'reg' property to determine the bus and the chipselect. The endianness is selected by the driver depending on which SoC is used. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: layerscape: Add incr-burst-type-adjustment property to USB3 nodeRan Wang2019-01-121-0/+3
| | | | | | | Add this property to all layerscape platforms to improve USB read write performance. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: layerscape: add num-viewport property for PCIe DT nodesHou Zhiqiang2019-01-111-0/+3
| | | | | | | | Add num-viewport property for PCIe DT nodes to specify how many viewports are implemented. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: add qdma device tree nodesPeng Ma2018-12-081-0/+22
| | | | | | | | add the qDMA device tree nodes for LS1043A devices. Signed-off-by: Wen He <wen.he_1@nxp.com> Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: fsl: Add all CPUs in cooling mapsViresh Kumar2018-12-081-2/+4
| | | | | | | | | | | | | | | | | | | Each CPU can (and does) participate in cooling down the system but the DT only captures a handful of them, normally CPU0, in the cooling maps. Things work by chance currently as under normal circumstances its the first CPU of each cluster which is used by the operating systems to probe the cooling devices. But as soon as this CPU ordering changes and any other CPU is used to bring up the cooling device, we will start seeing failures. Also the DT is rather incomplete when we list only one CPU in the cooling maps, as the hardware doesn't have any such limitations. Update cooling maps to include all devices affected by individual trip points. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: layerscape: removed compatible string "snps,dw-pcie"Hou Zhiqiang2018-12-081-3/+3
| | | | | | | | Removed the wrong compatible string "snps,dw-pcie", in case match incorrect driver. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: fsl: Add the status property disable PCIeBao Xiaowei2018-12-081-0/+3
| | | | | | | | Add the status property disable the PCIe, the property will be enable by bootloader. Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: fsl: Fix I2C and SPI bus warningsRob Herring2018-09-261-3/+3
| | | | | | | | | | | | | | dtc has new checks for I2C and SPI buses. Fix the SPI bus node names and warnings in unit-addresses. arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@57: I2C bus unit address format error, expected "53" arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@56: I2C bus unit address format error, expected "52" Cc: Shawn Guo <shawnguo@kernel.org> Cc: Li Yang <leoyang.li@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: fsl: remove big-endian field from IFC controllerPrabhakar Kushwaha2018-09-031-1/+1
| | | | | | | | | | | As per IFC binding, Absence of "little-endian" field causes registers access in big-endian mode. So no need to set explicit big-endian field IFC node for LS1043A and LS1046A. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* Merge tag 'armsoc-late' of ↵Linus Torvalds2018-08-251-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "A couple of late-merged changes that would be useful to get in this merge window: - Driver support for reset of audio complex on Meson platforms. The audio driver went in this merge window, and these changes have been in -next for a while (just not in our tree). - Power management fixes for IOMMU on Rockchip platforms, getting closer to kexec working on them, including Chromebooks. - Another pass updating "arm,psci" -> "psci" for some properties that have snuck in since last time it was done" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu/rockchip: Move irq request past pm_runtime_enable iommu/rockchip: Handle errors returned from PM framework arm64: rockchip: Force CONFIG_PM on Rockchip systems ARM: rockchip: Force CONFIG_PM on Rockchip systems arm64: dts: Fix various entry-method properties to reflect documentation reset: imx7: Fix always writing bits as 0 reset: meson: add meson audio arb driver reset: meson: add dt-bindings for meson-axg audio arb
| * arm64: dts: Fix various entry-method properties to reflect documentationAmit Kucheria2018-08-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The idle-states binding documentation[1] mentions that the 'entry-method' property is required on 64-bit platforms and must be set to "psci". commit a13f18f59d26 ("Documentation: arm: Fix typo in the idle-states bindings examples") attempted to fix this earlier but clearly more is needed. Fix the cpu-capacity.txt documentation that uses the incorrect value so we don't get copy-paste errors like these. Clarify the language in idle-states.txt by removing the reference to the psci bindings that might be causing this confusion. Finally, fix devicetrees of various boards to reflect current documentation. [1] Documentation/devicetree/bindings/arm/idle-states.txt (see idle-states node) Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | arm64: dts: freescale: Add missing cooling device properties for CPUsViresh Kumar2018-07-031-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cooling device properties, like "#cooling-cells" and "dynamic-power-coefficient", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add such missing properties. Do minor rearrangement as well to keep ordering consistent. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* | arm64: dts: freescale: Update to use SPDX identifiersLi Yang2018-06-191-38/+1
|/ | | | | | | | | | | | Replace license text with corresponding SPDX identifiers and update the format of existing SPDX identifiers to follow the new guideline Documentation/process/license-rules.rst. Note that some of the files mentioned X11 license previously but the license text actually matches MIT license. Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: fsl: update the cpu idle nodeYuantian Tang2018-02-241-1/+1
| | | | | | | | | | | According to PSCI standard v0.2, for CPU_SUSPEND call, which is used by cpu idle framework, bit[16] of state parameter must be 0. So update bit[16] of property 'arm,psci-suspend-param', which is used as state parameter, to 0. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: add cpu idle supportYuantian Tang2018-02-241-0/+21
| | | | | | Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* arm64: dts: ls1043a: Move cpu_thermal out of bus nodeFabio Estevam2018-02-121-31/+31
| | | | | | | | | | | | | | Move cpu_thermal node from soc node to root node. cpu_thermal node does not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-07 19:04:50 +0100