summaryrefslogtreecommitdiffstats
path: root/arch/arm64/configs (follow)
Commit message (Collapse)AuthorAgeFilesLines
* arm64: defconfig: enable some core options for 64bit Rockchip socsHeiko Stuebner2017-05-261-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Enable some very core config options used on 64bit Rockchip socs. As built-in driver enable the Rockchip spi driver as well as the cros-ec-spi and cros-ec keyboard driver, as this may be helpful in case an initrd does not work as expected and drops the user into a shell. Another built-in is the fan53555 regulator driver, as it and its register-compatible cousins Silergy syr827 and syr828 are often used on Rockchip socs as cpu-supply next to regular pmic. The rest can be enabled as modules and contains the pcie host controller and its phy, the sucessive approximation adc (saradc) that gets often used for additional buttons on Rockchip boards as well as the adc-keys Keyboard driver for these keys. The cros-ec-pwm also can be a module, as it is normally only used to drive display backlights as well as the Rockchip thermal controller that allows to read the cpu and gpu temperatures and affect frequency scaling if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
* arm64: defconfig: enable options needed for QCom DB410c boardRob Herring2017-05-191-0/+7
| | | | | | | | | | | Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson <olof@lixom.net>
* arm64: defconfig: sync with savedefconfigRob Herring2017-05-191-61/+42
| | | | | | | | | | | | | Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* Merge tag 'armsoc-arm64' of ↵Linus Torvalds2017-05-091-0/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit changes from Olof Johansson: "Changes to platform code for 64-bit ARM platforms. Most of these are small changes to the one defconfig we use on arm64 (no per-platform configs there), to enable new drivers. There are also a few other changes. Broadcom sold off their 'Vulcan' design to Cavium, where it is now called ThunderX2. While we normally don't rename stuff based on marketing's whims, it seemed appropriate to bring in renames on a few things such as MAINTAINERS, etc" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: sunxi: always enable reset controller arm64: defconfig: enable the Safexcel crypto engine as a module arm64: configs: enable SDHCI driver for Xenon MAINTAINERS: Broadcom Vulcan is now Cavium ThunderX2 arm64: defconfig: add Allwinner USB PHY arm64: defconfig: enable MVPP2 arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7 arm64: exynos: Enable Exynos PMU and PM domains drivers arm64: only select PINCTRL for Allwinner platforms arm64: set CONFIG_MMC_BCM2835=y in defconfig arm64: defconfig: enable I2C_PXA arm64: defconfig: enable MVNETA ARM64: defconfig: enable the leds-pwm driver and default-on trigger arm64: defconfig: Enable SH Mobile I2C controller
| * Merge tag 'mvebu-defconfig64-4.12-2' of git://git.infradead.org/linux-mvebu ↵Olof Johansson2017-04-191-0/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/arm64 mvebu defconfig64 for 4.12 (part 2) Select two new drivers for ARM64 mvebu SoCs: - Xenon SDHCI controller on Armada 37xx and Armada 7K/8K - Safexcel crypto engine on Armada 7K/8K * tag 'mvebu-defconfig64-4.12-2' of git://git.infradead.org/linux-mvebu: arm64: defconfig: enable the Safexcel crypto engine as a module arm64: configs: enable SDHCI driver for Xenon Signed-off-by: Olof Johansson <olof@lixom.net>
| | * arm64: defconfig: enable the Safexcel crypto engine as a moduleAntoine Tenart2017-04-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Safexcel EIP197 cryptographic engine is used on some Marvell SoCs, such as Armada 7040 and Armada 8040. Enable this driver as a module in the ARM64 defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| | * arm64: configs: enable SDHCI driver for XenonGregory CLEMENT2017-04-121-0/+1
| | | | | | | | | | | | | | | | | | | | | This patch enables the driver for the SDHCI controller found on the Marvell Armada 3700 and 7K/8K ARM64 SoCs. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| * | Merge tag 'samsung-soc64-4.12' of ↵Olof Johansson2017-04-191-0/+11
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64 Samsung ARM64 update for v4.12: 1. Exynos power management drivers support now ARMv8 SoC - Exynos5433 - so select them in ARCH_EXYNOS. 2. Enable few Exynos drivers for supported ARMv8 SoCs. * tag 'samsung-soc64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7 arm64: exynos: Enable Exynos PMU and PM domains drivers Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7Krzysztof Kozlowski2017-03-211-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable drivers specific to Exynos5433 and Exynos7: 1. MFD Low Power Audio SubSystem (LPASS), 2. DRM drivers (DECON display, outputs), 3. Drivers for video-related sub-blocks (JPEG, Multi Format Codec, GScaler). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
| * | | Merge tag 'sunxi-config64-for-4.12' of ↵Olof Johansson2017-04-191-0/+1
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/arm64 Allwinner arm64 config changes for 4.12 Two patches to change our Kconfig option and add new options in the defconfig. * tag 'sunxi-config64-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: defconfig: add Allwinner USB PHY arm64: only select PINCTRL for Allwinner platforms Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | arm64: defconfig: add Allwinner USB PHYAndre Przywara2017-03-241-0/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The arm64 defconfig covers the Allwinner A64 SoC boards quite well, but USB support is not enabled. Add the PHY config symbol to allow defconfig kernels to use USB. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | | Merge tag 'arm-soc/for-4.12/defconfig-arm64' of ↵Arnd Bergmann2017-03-311-0/+1
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://github.com/Broadcom/stblinux into next/arm64 Pull "Broadcom defconfig-arm64 changes for 4.12" from Florian Fainelli: This pull request contains Broadcom ARM64-based SoCs defconfig updates for 4.12, please pull the following: - Gerd enables the BCM2835 MMC driver which yields better performance than the default one (iProc) * tag 'arm-soc/for-4.12/defconfig-arm64' of http://github.com/Broadcom/stblinux: arm64: set CONFIG_MMC_BCM2835=y in defconfig
| | * | | arm64: set CONFIG_MMC_BCM2835=y in defconfigGerd Hoffmann2017-03-181-0/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to enable this controller so that we can switch the SD card's pinmux over to it by default, which will improve storage performance. Read access (dd with 64k blocks on rpi2): CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s CONFIG_MMC_BCM2835: 19-20 MB/s Differences on write access are pretty much in the noise. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Anholt <eric@anholt.net>
| * | | Merge tag 'mvebu-defconfig64-4.12-1' of git://git.infradead.org/linux-mvebu ↵Arnd Bergmann2017-03-301-0/+3
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/arm64 Pull "mvebu defconfig64 for 4.12 (part 1)" from Gregory CLEMENT: Update arm64 defconfig by adding MVPP2 for Marvell Armada 7K/8K and MVNETA and I2C_PXA for Armada 37xx. * tag 'mvebu-defconfig64-4.12-1' of git://git.infradead.org/linux-mvebu: arm64: defconfig: enable MVPP2 arm64: defconfig: enable I2C_PXA arm64: defconfig: enable MVNETA
| | * | arm64: defconfig: enable MVPP2Thomas Petazzoni2017-03-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MVPP2 network driver is used for the ARM64 Marvell Armada 7K and 8K platforms, so enable it in the arm64 defconfig. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| | * | arm64: defconfig: enable I2C_PXAGregory CLEMENT2017-03-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the Armada 37xx SoCs support the i2c pxa driver, enable it by default. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| | * | arm64: defconfig: enable MVNETAGregory CLEMENT2017-03-071-0/+1
| | |/ | | | | | | | | | | | | | | | | | | Now that the Armada 37xx SoCs support the mvneta driver, enable it by default. It is especially useful when booting on an NFS root. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
| * | Merge tag 'amlogic-defconfig' of ↵Arnd Bergmann2017-03-301-0/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/arm64 Pull "Amlogic: defconfig changes for v4.12" from Kevin Hilman: - enable PWM LEDs and LEDs default-on trigger * tag 'amlogic-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: defconfig: enable the leds-pwm driver and default-on trigger
| | * | ARM64: defconfig: enable the leds-pwm driver and default-on triggerMartin Blumenstingl2017-03-061-0/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables the leds-pwm driver to support LEDs which are PWM-powered (and thus dimmable). Additionally we have to enable the "default-on" trigger - this was not required before because the gpio-leds driver has a separate "default-state" property which can be used to enable the LED by default. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
| * / arm64: defconfig: Enable SH Mobile I2C controllerSimon Horman2017-03-061-0/+1
| |/ | | | | | | | | | | | | | | Enable SH Mobile I2C controller for use on R-Car Gen3 SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* / arm64: kdump: enable kdump in defconfigAKASHI Takahiro2017-04-051-0/+1
|/ | | | | | | | Kdump is enabled by default as kexec is. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* Merge tag 'armsoc-defconfig' of ↵Linus Torvalds2017-02-241-0/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Arnd Bergmann: "Defconfig additions, removals, etc. Almost all of them just turn on drivers that we want on some platform, usually after the driver has been merged into mainline. There is now a new defconfig file for tango4" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: multi_v7_defconfig: enable pstore configs ARM: multi_v7_defconfig: enable some newly added crypto modules ARM: davinci_all_defconfig: enable SATA modules arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT arm64: defconfig: enable CONFIG_MTD_BLOCK ARM: Import tango4_defconfig ARM: omap2plus_defconfig: Enable support for RTC M41T80 ARM: omap2plus_defconfig: Enable support for micrell phys ARM: vf610m4: defconfig: enable EXT4 filesystem ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 arm64: defconfig: Enable NUMA and NUMA_BALANCING arm64: defconfig: enable SMMUv3 config ARM: davinci_all_defconfig: enable iio ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER ARM: configs: stm32: Add RTC support in STM32 defconfig ARM: defconfig: qcom: add APQ8060 DragonBoard devices ARM: qcom_defconfig: enable thermal sensors ARM: qcom_defconfig: add ahci configs ARM: qcom_defconfig: add pcie and atl1c ethernet configs ARM: qcom_defconfig: add usb related configs ...
| * arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DTMasahiro Yamada2017-01-301-0/+2
| | | | | | | | | | | | | | | | Enable the NAND framework and the Denali NAND controller driver. This NAND controller is used on UniPhier SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * arm64: defconfig: enable CONFIG_MTD_BLOCKMasahiro Yamada2017-01-301-0/+1
| | | | | | | | | | | | | | Enable the block layer support for MTD devices. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * arm64: defconfig: Enable NUMA and NUMA_BALANCINGKefeng Wang2017-01-201-0/+2
| | | | | | | | | | | | | | | | | | Since much more arm64 SoCs with numa nodes, it's better to enable NUMA and NUMA_BALANCING to improve the performance on test. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
| * arm64: defconfig: enable SMMUv3 configZhou Wang2017-01-201-0/+1
| | | | | | | | | | Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
* | Merge tag 'armsoc-arm64' of ↵Linus Torvalds2017-02-241-0/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit updates from Arnd Bergmann: "Changes to platform code for 64-bit ARM platforms, only trivial stuff this time, a few defconfig changes to enable drivers, and a new entry for the Cavium ThunderX2 platform" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add Cavium ThunderX2 entry arm64: add ARCH_THUNDER2 to defconfig arm64: add THUNDER2 processor family MAINTAINERS: Extend ARM/Mediatek SoC support section arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCE arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K
| * | arm64: add ARCH_THUNDER2 to defconfigJayachandran C2017-02-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This will allow the default kernel build to boot on Cavium ThunderX2 CN99XX processors. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCEMasahiro Yamada2017-01-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Enable the Cadence SD/SDIO/eMMC controller. This is used on Socionext UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | Merge tag 'mvebu-defconfig64-4.11-1' of git://git.infradead.org/linux-mvebu ↵Olof Johansson2017-01-171-0/+1
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/arm64 mvebu defconfig64 for 4.11 (part 1) Update arm64 defconfig by adding XORv2 for Marvell Armada 7K/8K * tag 'mvebu-defconfig64-4.11-1' of git://git.infradead.org/linux-mvebu: arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K Signed-off-by: Olof Johansson <olof@lixom.net>
| | * arm64: defconfig: enable XORv2 for Marvell Armada 7K/8KThomas Petazzoni2017-01-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This commit enables the XORv2 DMA driver, which is used on the ARM64 Marvell Armada 7K and 8K platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* | | crypto: arm64/crc32 - merge CRC32 and PMULL instruction based driversArd Biesheuvel2017-02-111-1/+0
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PMULL based CRC32 implementation already contains code based on the separate, optional CRC32 instructions to fallback to when operating on small quantities of data. We can expose these routines directly on systems that lack the 64x64 PMULL instructions but do implement the CRC32 ones, which makes the driver that is based solely on those CRC32 instructions redundant. So remove it. Note that this aligns arm64 with ARM, whose accelerated CRC32 driver also combines the CRC32 extension based and the PMULL based versions. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* / ARM64: defconfig: enable DRM_MESON as moduleKevin Hilman2017-01-031-0/+1
|/ | | | Signed-off-by: Kevin Hilman <khilman@baylibre.com>
* Merge tag 'armsoc-arm64' of ↵Linus Torvalds2016-12-161-2/+53
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit updates from Arnd Bergmann: "Changes to platform code for 64-bit ARM platforms. We are not adding any new platforms that require code or Kconfig changes this time, so it's basically just defconfig changes to enable support for more drivers used on the existing platforms. This is mainly interesting for the Raspberry Pi 3, which should now work much better with the default build" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: defconfig: drop GPIO_SYSFS on multiplatforms arm64: defconfig: Do not lower CONFIG_LOG_BUF_SHIFT arm64: defconfig: allow rk3399-based boards to boot from mmc and usb arm64: defconfig: enable RK808 components arm64: defconfig: enable I2C and DW MMC controller on rockchip platform arm64: defconfig: Enable Tegra186 SoC ARM64: configs: Activate Internal PHY for Meson GXL arm64: qcom: enable GPIOLIB in Kconfig arm64: configs: enable configs for msm899(2/4) basic support ARM64: bcm2835: add thermal driver to default config ARM64: configs: Add Platform MHU in defconfig MAINTAINERS: Update Broadcom Vulcan maintainer email arm64: defconfig: enable EEPROM_AT25 config option arm64: Enable HIBERNATION in defconfig arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules ARM64: defconfig: Enable MMC related configs arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
| * Merge tag 'v4.10-rockchip-defconfig64' of ↵Arnd Bergmann2016-11-301-0/+11
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/arm64 Pull "Rockchip defconfig64 changes for 4.10" from Heiko Stübner: 64bit defconfig changes to allow arm64 Rockchip socs to basically boot. * tag 'v4.10-rockchip-defconfig64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: defconfig: allow rk3399-based boards to boot from mmc and usb arm64: defconfig: enable RK808 components arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
| | * arm64: defconfig: allow rk3399-based boards to boot from mmc and usbHeiko Stuebner2016-11-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Enable additional options necessary to boot rk3399-based boards to boot from either emmc or usb devices, like the arasan sdhci and its phy as well as the usb2 phy and general rockchip power-domain support. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * arm64: defconfig: enable RK808 componentsAndy Yan2016-11-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Many rockchip based arm64 boards use RK808 as PMIC, so enabe it here let the board bootup normally. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [added rk808-rtc as module and rk808-clk output built in] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * arm64: defconfig: enable I2C and DW MMC controller on rockchip platformAndy Yan2016-11-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | I2C and MMC are very basic modules for a board to bootup, as I2C always used to configure PMIC and MMC devices often used to store filesytem. So enable them here to let the rockchip based arm64 boards can bootup. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | arm64: defconfig: drop GPIO_SYSFS on multiplatformsLinus Walleij2016-11-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The sysfs ABI to GPIO is marked obsolete and should not be encouraged. Users should be encouraged to switch to using the character device. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | Merge tag 'arm-soc/for-4.10/defconfig-arm64' of ↵Arnd Bergmann2016-11-301-0/+18
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://github.com/Broadcom/stblinux into next/arm64 Pull "Broadcom defconfig-arm64 changes for 4.10" from Florian Fainelli: This pull request contains Broadcom ARM64-based SoCs defconfig changes for 4.10, please pull the following changes: - Eric updates the ARMv8 defconfig to contain everything that is needed to run a 64-bit kernel on the Raspberry Pi 3 - Scott enables the standard AT25 EEPROM driver as module for the ARM64 defconfig - Martin enables the Raspberry Pi Thermal driver in the ARM64 defconfig * tag 'arm-soc/for-4.10/defconfig-arm64' of http://github.com/Broadcom/stblinux: ARM64: bcm2835: add thermal driver to default config arm64: defconfig: enable EEPROM_AT25 config option arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig
| | * \ Merge tag 'bcm2835-defconfig-64-next-2016-11-18' into defconfig-arm64/nextFlorian Fainelli2016-11-221-0/+1
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | This pull enables the BCM2837 (Pi 3) thermal driver in the defconfig. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | | * | ARM64: bcm2835: add thermal driver to default configMartin Sperl2016-11-111-0/+1
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the thermal driver for bcm2837 to list of compiled modules in the default config. Changelog: V7 -> V8: rebased Signed-off-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Eric Anholt <eric@anholt.net>
| | * | arm64: defconfig: enable EEPROM_AT25 config optionScott Branden2016-11-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable support for on board SPI EEPROM by setting CONFIG_EEPROM_AT25=m Signed-off-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * | arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfigEric Anholt2016-10-191-0/+16
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | Most of the drivers are included as modules, except for serial (needed for early console), WDT (required for reboot), and the dependency chain of RASPBERRYPI_POWER (which is currently not buildable as a module, but should be changed). Signed-off-by: Eric Anholt <eric@anholt.net>
| * | arm64: defconfig: Do not lower CONFIG_LOG_BUF_SHIFTGeert Uytterhoeven2016-11-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default value of 17 for CONFIG_LOG_BUF_SHIFT is much more suitable than 14. The latter easily leads to lost kernel messages on systems with only one CPU core. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
| * | Merge tag 'tegra-for-4.10-arm64-defconfig' of ↵Olof Johansson2016-11-191-0/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/arm64 arm64: tegra: Default configuration updates for v4.10-rc1 Enable Tegra186 support. * tag 'tegra-for-4.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: defconfig: Enable Tegra186 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | arm64: defconfig: Enable Tegra186 SoCJoseph Lo2016-11-151-0/+1
| | |/ | | | | | | | | | | | | | | | | | | Enable Tegra186 SoC. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | Merge tag 'amlogic-defconfig' of ↵Olof Johansson2016-11-191-0/+7
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/arm64 Amlogic defconfig updates for v4.10 - enable I2C driver - enable SPI, watchdog and HW random as modules * tag 'amlogic-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: configs: Activate Internal PHY for Meson GXL ARM64: configs: Add Platform MHU in defconfig ARM64: defconfig: Enable MMC related configs Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM64: configs: Activate Internal PHY for Meson GXLNeil Armstrong2016-11-141-0/+3
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
| | * | ARM64: configs: Add Platform MHU in defconfigNeil Armstrong2016-11-071-0/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 23:47:10 +0100