summaryrefslogtreecommitdiffstats
path: root/arch/arm (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: Kirkwood: Add support for many Synology NAS devicesBen Peddell2014-02-2218-0/+1610
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <andrew@lunn.ch> translation of the board setup file maintained by Ben Peddell <klightspeed@killerwolves.net> The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC. Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43. Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply. Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: dove: Enable Dove watchdog in the devicetreeEzequiel Garcia2014-02-171-0/+8
| | | | | | | | Add the devicetree node to enable watchdog support available in Dove SoCs. Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: Add RSTOUT 'reg' entry to devicetreeEzequiel Garcia2014-02-171-1/+1
| | | | | | | | | | In order to support multiplatform builds the watchdog devicetree binding was modified and now the 'reg' property is specified to need two entries. This commit adds the second entry as-per the new specification. Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: Enable Armada 370/XP watchdog in the devicetreeEzequiel Garcia2014-02-173-0/+15
| | | | | | | | | Add the DT nodes to enable watchdog support available in Armada 370 and Armada XP SoCs. Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: convert rd88f6281-setup.c to DT.Andrew Lunn2014-02-174-0/+211
| | | | | | | | | | | Perform a mechanical translation of rd88f6281-setup.c into DT. Since the hardware differs between the A0 and A1 stepping, two dts files are used, and a .dtsi file for the common parts. The A0 part does not have a "wan" port on the switch and uses PHY address 10 to address the switch. The A1 part does have the "wan" port and uses address 0. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: Add DT description of rd88f6192.Andrew Lunn2014-02-172-0/+113
| | | | | | | Mechanically translate rd88f6192-nas-setup.c into DT equivelent. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: enable S/PDIF audio in Armada 370 DB Device TreeThomas Petazzoni2014-02-171-1/+9
| | | | | | | | | | In addition to the analog audio input and output, the Armada 370 DB also has S/PDIF input and output optical connectors. This commit improves the Device Tree description of the Armada 370 DB platform to enable the S/PDIF support. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: add audio support to Armada 370 DBThomas Petazzoni2014-02-171-0/+48
| | | | | | | | | | | | | | | | | This commit adds the necessary Device Tree informations to enable audio support on the Armada 370 DB platform. In details it: * Instantiates the CS42L51 audio codec on the I2C0 bus, and configures this bus with the appropriate pin-muxing configuration. * Enables the I2S audio controller, and configures it with the appropriate pin-muxing configuration. * Through hog pins, ensures that the other pins possibly used for I2S are muxed with another function than I2S. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: add I2C0 muxing option for Armada 370 SoCThomas Petazzoni2014-02-171-0/+5
| | | | | | | | | This commit adds a pin-muxing configuration for the I2C0 bus of the Armada 370, which is used on the Armada 370 DB platform to interface with the CS42L51 audio codec. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: add audio I2S controller to Armada 370 Device TreeThomas Petazzoni2014-02-171-0/+23
| | | | | | | | | The Armada 370 SoC has an I2S audio controller. This commit adds the description of this controller to the Device Tree describing this SoC, as well as two possible muxing configurations for the I2S bus pins. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: use input DT defines in Armada 370/XP boardsThomas Petazzoni2014-02-113-3/+6
| | | | | | | | | | Instead of harcoding keycodes specifications in the Armada 370/XP boards, use the <dt-bindings/input/input.h> header file and its keycode definitions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: mvebu: use GPIO DT defines in Armada 370/XP boardsThomas Petazzoni2014-02-114-9/+13
| | | | | | | | | | Instead of harcoding 0 and 1 for the gpio specifications in the Armada 370/XP boards, use the <dt-bindings/gpio/gpio.h> header file and its GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW definitions. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: Add DT description of QNAP 419Andrew Lunn2014-02-054-1/+130
| | | | | | | | | | | | Re-implement the Marvell Kirkwood ts41x-setup.c in DT. As with the QNAP 119, there are two variants, depending on which SoC has been used. They differ on Ethernet PHY addresses and number of PCIe busses. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Ian Campbell <ijc@hellion.org.uk> (kirkwood-ts419-6281.dtb) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: Add support for Excito Bubba B3Andrew Lunn2014-02-052-1/+206
| | | | | | | | The Excito Bubba B3 is a home server, single drive NAS box, Wifi access point, etc. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'fixes-for-linus' of ↵Linus Torvalds2014-02-0227-43/+381
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's a set of patches for (hopefully) -rc1. Some of them are fixes, but a good number of them also do things such as enable new drivers in the defconfigs for platforms that have such devices, increases coverage of the multiplatform defconfig and some DTS changes that plumbs up some of the devices that now have bindings and driver support. The commit dates are recent; we've mostly collected these fixes in the last few days but I also had to rebuild the branch yesterday to sort out some internal conflicts which reset the timestamps. The changes should have been tested by each platform maintainer already (and few of them have cross-platform impact) so I'm personally not too concerned by it at this time" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA ARM: multi_v7_defconfig: add mvebu drivers clocksource: kona: Add basic use of external clock drivers: bus: fix CCI driver kcalloc call parameters swap ARM: dts: bcm28155-ap: Fix Card Detection GPIO ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set MAINTAINERS: ARM: SiRF: use regex patterns to involve all SiRF drivers ARM: dts: zynq: Add SDHCI nodes ARM: hisi: don't select SMP ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS ARM: multi_v7: copy most options from tegra_defconfig ARM: iop32x: fix power off handling for the EM7210 board ARM: integrator: restore static map on the CP ARM: msm_defconfig: Enable MSM clock drivers ARM: dts: msm: Add clock controller nodes and hook into uart ARM: OMAP4+: move errata initialization to omap4_pm_init_early ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference ...
| * ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMAOlof Johansson2014-02-011-10/+2
| | | | | | | | | | | | | | | | | | | | | | | | TI_EDMA fell out of automatically selected options in the multi_v7 defconfig due to a select being removed from the davinci Kconfig entry. So we need to re-enable explicitly to not regress some platforms. The rest is just the result of running 'make multi_v7_defconfig + make savedefconfig' to remove entries that are no longer needed due to changed dependencies/selects or defaults. Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: multi_v7_defconfig: add mvebu driversOlof Johansson2014-02-011-0/+10
| | | | | | | | | | | | | | | | | | Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: dts: bcm28155-ap: Fix Card Detection GPIOTim Kryger2014-02-011-1/+3
| | | | | | | | | | | | | | | | | | | | | | The board schematic states that the "SD_CARD_DET_N gets pulled to GND when card is inserted" so the polarity has been updated to active low. Polarity is now specified with a GPIO define instead of a magic number. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * Merge tag 'renesas-dt-fixes2-for-v3.14' of ↵Olof Johansson2014-02-011-4/+4
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Second Round of Renesas ARM Based SoC DT Fixes for v3.14 Correct i2c clock references for r8a7790 (R-Car H2) SoC The error was introduced in 72197ca7a1cb1cea5 ("ARM: shmobile: r8a7790: Reference clocks") which is queued up for v3.14. * tag 'renesas-dt-fixes2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock referenceBen Dooks2014-01-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The R8A7790's dtsi file i2c0, i2c1, i2c2, and i2c3 nodes have clock references to the mstp3_clks clock node, however these clocks are in the mstp9_clks node. The error was introducted in 72197ca7a1cb1cea5 ("ARM: shmobile: r8a7790: Reference clocks") which is in Simon's current development tree. This patch fixes the following error: of_clk_src_onecell_get: invalid clock index 31 i2c-rcar e6508000.i2c: cannot get clock i2c-rcar: probe of e6508000.i2c failed with error -2 Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * | ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHYFabio Estevam2014-02-011-0/+1
| | | | | | | | | | | | | | | | | | | | | Select CONFIG_AT803X_PHY so that we can boot hummingboard via NFS. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not setGrygorii Strashko2014-02-012-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop automatic selection of TI_EDMA from Keystone Kconfig file, as it produces build warning in case if CONFIG_DMADEVICES is not set: warning: (ARCH_KEYSTONE) selects TI_EDMA which has unmet direct dependencies (DMADEVICES && (ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE)) Instead enable TI EDMA support from defconfig. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | Merge tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson2014-01-313-3/+50
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mvebu fixes for v3.13 (incremental #2) - allow building and booting DT and non-DT plat-orion SoCs - catch proper return value for kirkwood_pm_init() - properly check return of of_iomap to solve boot hangs (mirabox, others) - remove a compile warning on Armada 370 with non-SMP. * tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed ARM: kirkwood: kirkwood_pm_init() should return void ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failedGregory CLEMENT2014-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When pci_base is accessed whereas it has not been properly mapped by of_iomap() the kernel hang. The check of this pointer made an improper use of IS_ERR() instead of comparing to NULL. This patch fix this issue. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: stable@vger.kernel.org # v3.12+: af8d1c63afcb: ARM: mvebu: Add support to get the ID and the revision of a SoC Cc: stable@vger.kernel.org # v3.12+: 85e618a1be2b: ARM: mvebu: Add quirk for i2c for the OpenBlocks AX3-4 board Cc: stable@vger.kernel.org # v3.12+: 6cf70ae928ba: i2c: mv64xxx: Fix bus hang on A0 version of the Armada XP SoCs Cc: stable@vger.kernel.org # v3.12+: f8b94beb7e6a: i2c: mv64xxx: Document the newly introduced Armada XP A0 compatible Cc: stable@vger.kernel.org # v3.12+ Fixes: 930ab3d403ae (i2c: mv64xxx: Add I2C Transaction Generator support) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | ARM: kirkwood: kirkwood_pm_init() should return voidEzequiel Garcia2014-01-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function was originally meant to return void as declared in the common.h header. Fix it and include the header to catch these errors in the future. [jac] removed 'return 0;' to clear this warning: arch/arm/mach-kirkwood/pm.c: In function 'kirkwood_pm_init': arch/arm/mach-kirkwood/pm.c:73:2: warning: 'return' with a value, in function returning void [enabled by default] Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLERSebastian Hesselbarth2014-01-161-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip driver. As expected for irqchip drivers, it uses a C-style interrupt handler and therefore selects MULTI_IRQ_HANDLER. Now, compiling a kernel with both non-DT and DT support enabled, selecting MULTI_IRQ_HANDLER will break ASM irq handler used by non-DT boards. Therefore, we provide a C-style irq handler even for non-DT boards, if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler in orion_irq_init this is transparent to all non-DT board files. While the regression report was filed on Marvell Kirkwood, also Marvell Dove non-DT boards are affected and fixed by this patch. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Reported-by: Ian Campbell <ijc@hellion.org.uk> Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 2326f04321a9 ("ARM: kirkwood: convert to DT irqchip and clocksource") Fixes: f07d73e33d0e ("ARM: dove: convert to DT irqchip and clocksource") Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | | ARM: dts: zynq: Add SDHCI nodesSoren Brinkmann2014-01-314-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add nodes for the Arasan SDHCI controller to Zynq dts files. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: hisi: don't select SMPRob Herring2014-01-311-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SMP is a user configurable option, not a hardware feature and should not be selected. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: tegra: rebuild tegra_defconfig to add DEBUG_FSStephen Warren2014-01-311-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled by tegra_defconfig. However, this config option no longer exists, so no longer selects DEBUG_FS, and nothing else selects it either. So, "make tegra_defconfig" no longer enables DEBUG_FS in .config. Rebuild tegra_defconfig on top of next-20140424, while manually re-enabling DEBUG_FS. Reasons for removed entries are: - I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT - DRM_PANEL: selected by DRM_TEGRA - NEW_LEDS: selected by many things; at least VT - LEDS_CLASS: selected by many things; at least VT - LEDS_TRIGGERS: selected by many things; at least VT - COMMON_CLK_DEBUG: no longer exists Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
| * | | ARM: multi_v7: copy most options from tegra_defconfigStephen Warren2014-01-311-11/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: iop32x: fix power off handling for the EM7210 boardLinus Walleij2014-01-311-5/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board was missed when converting all the others to proper abstracted GPIO handling. Fix it up the right way by requesting and driving GPIO line 0 high through gpiolib to power off the machine. Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: integrator: restore static map on the CPLinus Walleij2014-01-311-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 78d1632183454dba46ca8295484a5e7603acdc18 deleted the static mappings of the core modules, but this static map is still needed on the Integrator/CP (not the Integrator/AP). Restore the static map on the Integrator/CP. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: msm_defconfig: Enable MSM clock driversStephen Boyd2014-01-311-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to probe the clock controller devices and boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: dts: msm: Add clock controller nodes and hook into uartStephen Boyd2014-01-313-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the necessary DT nodes to probe the clock controllers on MSM devices as well as hook up the uart nodes to the clock controllers. This should allow us to boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: OMAP4+: move errata initialization to omap4_pm_init_earlyNishanth Menon2014-01-314-5/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move all OMAP4 PM errata initializations to centralized location in omap4_pm_init_early. This allows for users to utilize the erratas in various submodules as needed. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidleStrashko, Grygorii2014-01-314-5/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The same workaround as ff999b8a0983ee15668394ed49e38d3568fc6859 "ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC ..." need to be applied not only when system is booting, but when MPUSS hits OSWR state through CPUIdle too. Without this WA the same issue is reproduced now on boards PandaES and Tablet/Blaze with SOM OMAP4460 when CONFIG_CPU_IDLE is enabled. After MPUSS has enterred OSWR and waken up: - GIC distributor became disabled forever - scheduling is not performed any more Cc: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reported-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* | | | Merge branch 'v4l_for_linus' of ↵Linus Torvalds2014-01-311-0/+7
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4) - a new dvb frontend for ds2103 chipset (m88ds2103) - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf) - new drivers for R-Car VSP1 - a new radio driver: radio-raremono - a new tuner driver for ts2022 chipset (m88ts2022) - the analog part of em28xx is now a separate module that only load/runs if the device is not a pure digital TV device - added a staging driver for bcm2048 radio devices - the omap 2 video driver (omap24xx) was moved to staging. This driver is for an old hardware and uses a deprecated Kernel internal API. If nobody cares enough to fix it, it would be removed on a couple Kernel releases - the sn9c102 driver was moved to staging. This driver was replaced by gspca, and disabled on some distros, as almost all devices are known to work properly with gspca. It should be removed from kernel on a couple Kernel releases - lots of driver fixes, improvements and cleanups * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits) [media] media: v4l2-dev: fix video device index assignment [media] rc-core: reuse device numbers [media] em28xx-cards: properly initialize the device bitmap [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c [media] Staging: media: Fix quoted string split across line in as102_fe.c [media] media: st-rc: Add reset support [media] m2m-deinterlace: fix allocated struct type [media] radio-usb-si4713: fix sparse non static symbol warnings [media] em28xx-audio: remove needless check before usb_free_coherent() [media] au0828: Fix sparse non static symbol warning Revert "[media] go7007-usb: only use go->dev after allocated" [media] em28xx-audio: provide an error code when URB submit fails [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0 [media] em28xx: make 'em28xx_ctrl_ops' static em28xx-alsa: Fix error patch for init/fini [media] em28xx-audio: flush work at .fini [media] drxk: remove the option to load firmware asynchronously [media] em28xx: adjust period size at runtime ...
| * | | | [media] si4713: move supply list to si4713_platform_dataDinesh Ram2013-12-181-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The supply list is needed by the platform driver, but not by the usb driver. So this information belongs to the platform data and should not be hardcoded in the subdevice driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* | | | | Merge tag 'stable/for-linus-3.14-rc0-late-tag' of ↵Linus Torvalds2014-01-312-30/+48
|\ \ \ \ \ | |_|/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen bugfixes from Konrad Rzeszutek Wilk: "Bug-fixes for the new features that were added during this cycle. There are also two fixes for long-standing issues for which we have a solution: grant-table operations extra work that was not needed causing performance issues and the self balloon code was too aggressive causing OOMs. Details: - Xen ARM couldn't use the new FIFO events - Xen ARM couldn't use the SWIOTLB if compiled as 32-bit with 64-bit PCIe devices. - Grant table were doing needless M2P operations. - Ratchet down the self-balloon code so it won't OOM. - Fix misplaced kfree in Xen PVH error code paths" * tag 'stable/for-linus-3.14-rc0-late-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: Fix misplaced kfree from xlated_setup_gnttab_pages drivers: xen: deaggressive selfballoon driver xen/grant-table: Avoid m2p_override during mapping xen/gnttab: Use phys_addr_t to describe the grant frame base address xen: swiotlb: handle sizeof(dma_addr_t) != sizeof(phys_addr_t) arm/xen: Initialize event channels earlier
| * | | | xen/gnttab: Use phys_addr_t to describe the grant frame base addressJulien Grall2014-01-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On ARM, address size can be 32 bits or 64 bits (if CONFIG_ARCH_PHYS_ADDR_T_64BIT is enabled). We can't assume that the grant frame base address will always fits in an unsigned long. Use phys_addr_t instead of unsigned long as argument for gnttab_setup_auto_xlat_frames. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
| * | | | xen: swiotlb: handle sizeof(dma_addr_t) != sizeof(phys_addr_t)Ian Campbell2014-01-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The use of phys_to_machine and machine_to_phys in the phys<=>bus conversions causes us to lose the top bits of the DMA address if the size of a DMA address is not the same as the size of the phyiscal address. This can happen in practice on ARM where foreign pages can be above 4GB even though the local kernel does not have LPAE page tables enabled (which is totally reasonable if the guest does not itself have >4GB of RAM). In this case the kernel still maps the foreign pages at a phys addr below 4G (as it must) but the resulting DMA address (returned by the grant map operation) is much higher. This is analogous to a hardware device which has its view of RAM mapped up high for some reason. This patch makes I/O to foreign pages (specifically blkif) work on 32-bit ARM systems with more than 4GB of RAM. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
| * | | | arm/xen: Initialize event channels earlierJulien Grall2014-01-301-27/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Event channels driver needs to be initialized very early. Until now, Xen initialization was done after all CPUs was bring up. We can safely move the initialization to an early initcall. Also use a cpu notifier to: - Register the VCPU when the CPU is prepared - Enable event channel IRQ when the CPU is running Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
* | | | | Merge tag 'late-dt-for-linus' of ↵Linus Torvalds2014-01-315-11/+207
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late but were considered self-contained enough to still go in for v3.14. They are all device tree updtes this time around, and mainly for Broadcom SoCs" * tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: moxart: move fixed rate clock child node to board level dts clk: bcm281xx: define kona clock binding ARM: dts: add usb udc support to bcm281xx ARM: dts: Specify clocks for timer on bcm11351 Documentation: dt: kona-timer: Add clocks property ARM: dts: Specify clocks for SDHCIs on bcm11351 Documentation: dt: kona-sdhci: Add clocks property ARM: dts: Specify clocks for UARTs on bcm11351 ARM: dts: bcm281xx: Add i2c busses ARM: dts: Declare clocks as fixed on bcm11351 ARM: dts: bcm28155-ap: Enable all the i2c busses
| * | | | | ARM: moxart: move fixed rate clock child node to board level dtsJonas Jensen2014-01-242-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a skeleton "clocks { .. }" remain in .dtsi, the child node can be moved to .dts, "ref12" is then found by of_clk_get(). Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | Merge tag 'bcm-for-3.14-dt' of git://github.com/broadcom/bcm11351 into next/dtKevin Hilman2014-01-2241-258/+725
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Christian Daudt: Add i2c, usb and clock DT configuration to bcm mobile. * tag 'bcm-for-3.14-dt' of git://github.com/broadcom/bcm11351: (697 commits) clk: bcm281xx: define kona clock binding ARM: dts: add usb udc support to bcm281xx ARM: dts: Specify clocks for timer on bcm11351 Documentation: dt: kona-timer: Add clocks property ARM: dts: Specify clocks for SDHCIs on bcm11351 Documentation: dt: kona-sdhci: Add clocks property ARM: dts: Specify clocks for UARTs on bcm11351 ARM: dts: bcm281xx: Add i2c busses ARM: dts: Declare clocks as fixed on bcm11351 ARM: dts: bcm28155-ap: Enable all the i2c busses +Linux 3.13-rc5 ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
| | * | | | | ARM: dts: add usb udc support to bcm281xxMatt Porter2013-12-233-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds USB OTG/PHY and clock support to BCM281xx and enables UDC support on the bcm11351-brt and bcm28155-ap boards. Signed-off-by: Matt Porter <mporter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org>
| | * | | | | ARM: dts: Specify clocks for timer on bcm11351Tim Kryger2013-12-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specify the external clock label in the timer node. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org>
| | * | | | | ARM: dts: Specify clocks for SDHCIs on bcm11351Tim Kryger2013-12-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specify the external clock label in each SDHCI node. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org>
| | * | | | | ARM: dts: Specify clocks for UARTs on bcm11351Tim Kryger2013-12-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The frequency property in "snps,dw-apb-uart" entries are no longer required if the rate of the external clock can be determined using the clk api (see e302cd9 serial: 8250_dw: add support for clk api). This patch replaces the frequency property in the UART nodes of bcm11351.dtsi with references to the relevant clocks following the common clock binding. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org>
| | * | | | | ARM: dts: bcm281xx: Add i2c bussesTim Kryger2013-12-231-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the DTS nodes for all the i2c busses in the SoC. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-16 23:12:38 +0100